School of Civil Engineering (SCE)

2021

• Nadig H.D.K., Sreekala R., Sathish Kumar K., Simon J., “Floor Response Spectra: An Investigation on Hospital Building”, Lecture Notes in Civil Engineering, 2021, Vol.78, Pg.No.337-345.
• Ajeesh S.S., Arul Jayachandran S., “Spline finite strip analysis of thin-walled flexural members subjected to general loading with intermediate restraints”, Thin-Walled Structures, 2021, Vol.158.
• Saridhe S.P., Selvaraj T., “Reporting the ancient green construction technology of limecrete slabs adopted in Udaipur, Rajasthan”, Journal of Cleaner Production, 2021, Vol.279.
• Angel Jessieleena A., Priyanka M., Saravanakumar M.P., “Comparative study of Fenton, Fe2+/NaOCl and Fe2+/(NH4)2S2O8 on tannery sludge dewaterability, degradability of organics and leachability of chromium”, Journal of Hazardous Materials, 2021, Vol.402.
• Shanmuga Priya T., Mehra A., Jain S., Kakria K., “Effect of graphene oxide on high-strength concrete induced with rice husk ash: mechanical and durability performance”, Innovative Infrastructure Solutions, 2021, Vol.6, Issue 1.
• Suresh R., Sofi A., Ganesh K., “Comparative Study of Pedestrian Vibration for Design of Steel Arch Bridge”, Lecture Notes in Civil Engineering, 2021, Vol.78, Pg.No.1-17.
• Danish P., Ganesh G.M., “Self-compacting Concrete Optimization of Mix Design Procedure by the Modifications of Rational Method", RILEM Bookseries, 2021, Vol.29, Pg.No.369-396.
• Gopinath, Vijayakumar, Pasupuleti N.S., “On-road crime detection using artificial intelligence”, Lecture Notes in Electrical Engineering, 2021, Vol.661, Pg.No.423-432.
• Koshy A.J., Sofi A., Santhakumar A.R., “Lateral Load Analyses of Multi-storeyed Frames with and Without Shear Walls”, Lecture Notes in Civil Engineering, 2021, Vol.78, Pg.No.19-35.
• Performance of deep learning vs machine learning in plant leaf disease detection, Sujatha R., Chatterjee J.M., Jhanjhi N.Z., Brohi S.N., Microprocessors and Microsystems, Vol:80, DOI: 10.1016/j.micpro.2020.103615
• Removal of Bisphenol A and Methylene Blue by a-MnO2Nanorods: Impact of Ultrasonication, Mechanism, Isotherm, and Kinetic Models, Mathew A.T., Saravanakumar M.P., Journal of Hazardous, Toxic, and Radioactive Waste, Vol:25, Issue: 2, DOI: 10.1061/(ASCE)HZ.2153-5515.0000600
• Health benefits of achieving fine particulate matter standards in India A nationwide assessment, Manojkumar N., Srimuruganandam B., Science of the Total Environment, DOI: 10.1016/j.scitotenv.2020.142999
• Microplastics in seafood as an emerging threat to marine environment: A case study in Goa, west coast of India, Saha M., Naik A., Desai A., Nanajkar M., Rathore C., Kumar M., Gupta P., Chemosphere, Vol:270, DOI: 10.1016/j.chemosphere.2020.129359
• Research initiatives on the influence of wollastonite in cement-based construction material- A review, Nair N.A., Sairam V., Journal of Cleaner Production, DOI: 10.1016/j.jclepro.2020.124665
• Performance evaluation of microbial fuel cell with sewage wastewater and RO concentrate using composite anode made of Luffa aegyptiaca, Thakur S., Das B., Environmental Progress and Sustainable Energy
• Fracture analysis of plates and shells using FEM and XFEM, Malavika V.A., Asraff A.K., Kumar M., Sofi A., Innovative Infrastructure Solutions, Vol:6, Issue: 1, DOI: 10.1007/s41062-020-00439-z
• Effect of GGBS Addition on Reactivity and Microstructure Properties of Ambient Cured Fly Ash Based Geopolymer Concrete, Nagajothi S., Elavenil S., Silicon, DOI: 10.1007/s12633-020-00470-w
• Development of an anoxic nitrification-denitrification process in a granulated nanoscale oxyhydroxides of Fe packed bed reactor for the simultaneous removal of NH4+-N and COD, Desireddy S., Raghupatruni Lakshmi M., Pothanamkandathil Chacko S., Mehta A., Environmental Nanotechnology, Monitoring and Management, Vol:15, DOI: 10.1016/j.enmm.2020.100412
• Commuter exposure concentrations and inhalation doses in traffic and residential routes of Vellore city, India, Manojkumar N., Monishraj M., Srimuruganandam B., Atmospheric Pollution Research, DOI: 10.1016/j.apr.2020.09.002
• Paddy-soaked rice mill wastewater treatment by phycoremediation and feasibility study on use of algal biomass as biofertilizer, Umamaheswari J., Shanthakumar S., Journal of Chemical Technology and Biotechnology, DOI: 10.1002/jctb.6551
• Experimental Study on GFRP Strips Strengthened New Two Stage Concrete Slabs under Falling Mass Collisions, Loganaganandan M., Murali G., Salaimanimagudam M.P., Haridharan M.K., Karthikeyan K., KSCE Journal of Civil Engineering, DOI: 10.1007/s12205-020-0331-8
• Structural integrity of RCC modular concrete structure, Kuncham S.R., Ramesh Kannan M., Journal of Physics: Conference Series, Vol:1716, Issue: 1, DOI: 10.1088/1742-6596/1716/1/012017
• Prediction of self-healing characteristics of GGBS admixed concrete using artificial neural network, Chaitanya M., Manikandan P., Prem Kumar V., Elavenil S., Vasugi V., Journal of Physics: Conference Series, Vol:1716, Issue: 1, DOI: 10.1088/1742-6596/1716/1/012019
• Managed Aquifer Recharge in the Gulf Countries: A Review and Selection Criteria, Parimalarenganayaki S., Arabian Journal for Science and Engineering, DOI: 10.1007/s13369-020-05060-x
• Comparative study on the dynamic analysis of blast loaded concrete and steel structure, Kumar M.S., Vasugi V., Elavenil S., Journal of Physics: Conference Series, Vol:1716, Issue: 1, DOI: 10.1088/1742-6596/1716/1/012014
• Review on the use of environmental isotopes for groundwater recharge and evaporation studies in the GCC countries, Mohamed M.M., Parimalarenganayaki S., Khan Q., Murad A., Groundwater for Sustainable Development, Vol:12, DOI: 10.1016/j.gsd.2021.100546
• Investigation on performance of water ion modified cement matrix, Thenua K., Shanmugasundaram M., Karthiyaini S., Journal of Physics: Conference Series, Vol:1716, Issue: 1, DOI: 10.1088/1742-6596/1716/1/012021
• Strength predictions of GGBS based cement mortar with different M-Sands using Neural networks, Kumar A.B., Vasugi V., Elavenil S., Journal of Physics: Conference Series, Vol:1716, Issue: 1, DOI: 10.1088/1742-6596/1716/1/012015
• Pozzolanic properties of agro waste ashes for potential cement replacement predicted using ANN, Manikanta C., Manikandan P., Duraimurugan S., Elavenil S., Vasugi V., Journal of Physics: Conference Series, Vol:1716, Issue: 1, DOI: 10.1088/1742-6596/1716/1/012018
• Analysis of tubular joint of offshore structure, Sawant S.S., Muthumani K., Journal of Physics: Conference Series, Vol:1716, Issue: 1, DOI: 10.1088/1742-6596/1716/1/012012
• Statistical and neural net model in predicting the strength of pozzolan admixed concrete, Mandal R., Shanmugasundaram M., Karthiyaini S., Journal of Physics: Conference Series, Vol:1716, Issue: 1, DOI: 10.1088/1742-6596/1716/1/012020
• Static and dynamic analysis of steel beams with web openings, Mathur S., Senthilpandian M., Karthikeyan K., Journal of Physics: Conference Series, Vol:1716, Issue: 1, DOI: 10.1088/1742-6596/1716/1/012016
• Peak ground acceleration analysis using past earthquake data, Elizabeth Philip S., Helen Santhi M., Journal of Physics: Conference Series, Vol:1716, Issue: 1, DOI: 10.1088/1742-6596/1716/1/012013
• Removal of cadmium by heavy metal resistant bacteria isolated from Hussain Sagar Lake Hyderabad, Rahman K., Menon U., V S., J R., Biomass Conversion and Biorefinery, DOI: 10.1007/s13399-021-01354-8
• Application of micro-morphology in the physical characterization of urban road dust, Jose J., Srimuruganandam B., Particuology, DOI: 10.1016/j.partic.2020.05.002
• Assessment of metals pollution and subsequent ecological risk in water, sediments and vegetation from a shallow lake: a case study from Ranipet industrial town, Tamil Nadu, India, Sai Chaithanya M., Das B., Vidya R., International Journal of Environmental Analytical Chemistry, DOI: 10.1080/03067319.2021.1882449
• Energy analysis and water conservation measures by water audit at thermal power stations, Nandini M., Raja Sekhar Y., Subramanyam G., Sustainable Water Resources Management, Vol:7, Issue: 1, DOI: 10.1007/s40899-020-00487-4
• Extended End Plate Long Bolted Joint Using Cold Formed Steel Hollow and Concrete Filled Column, SenthilPandian M., Helen Santhi M., Gopalan B., International Journal of Steel Structures, DOI: 10.1007/s13296-021-00460-7
• A Critical Review of Waste Glass Powder as an Aluminosilicate Source Material for Sustainable Geopolymer Concrete Production, Manikandan P., Vasugi V., Silicon, DOI: 10.1007/s12633-020-00929-w
• Identification of Bio-Minerals and Their Origin in Lime Mortars of Ancient Monument: Thanjavur Palace, Pradeep S., Selvaraj T., International Journal of Architectural Heritage, DOI: 10.1080/15583058.2019.1623341
• Health effects of particulate matter in major Indian cities, Manojkumar N., Srimuruganandam B., International Journal of Environmental Health Research, DOI: 10.1080/09603123.2019.1651257
• Performance Assessment of Areca Leaf Grids for Soil Reinforcement Applications, Kolathayar S., Aravind C.A., Shukla S.K., Journal of Natural Fibers, DOI: 10.1080/15440478.2019.1658253
• Application of lean in construction using value stream mapping, Ramani P.V., KSD L.K.L., Engineering, Construction and Architectural Management, DOI: 10.1108/ECAM-12-2018-0572
• Ancient settlements-atavistic solutions for present water supply and drainage problems engendered by urbanism, Selvaraj T., Yadav A., Bahuguna H., Drewnowski J., Ganesapillai M., Environment, Development and Sustainability, DOI: 10.1007/s10668-020-00954-0
• Effect of silt loading on particle concentration in the atmosphere from resuspended road dust through particulate matter dispersion modeling, Jose J., Srimuruganandam B., Air Quality, Atmosphere and Health, DOI: 10.1007/s11869-021-01034-6
• Remediation of metal/metalloid-polluted soils: A short review, Raffa C.M., Chiampo F., Shanthakumar S., Applied Sciences (Switzerland), Vol:11, Issue: 9, DOI: 10.3390/app11094134
• Insights into the influence of CO2 supplement on phycoremediation and lipid accumulation potential of microalgae: An exploration for biodiesel production, Saranya D., Shanthakumar S., Environmental Technology and Innovation, Vol:23, DOI: 10.1016/j.eti.2021.101596
• Risk identification, assessments, and prediction for mega construction projects: A risk prediction paradigm based on cross analytical-machine learning model, Chattapadhyay D.B., Putta J., Rama Mohan Rao P., Buildings, Vol:11, Issue: 4, DOI: 10.3390/buildings11040172
• Investigation of on-road fine particulate matter exposure concentration and its inhalation dosage levels in an urban area, Manojkumar N., Srimuruganandam B., Building and Environment, Vol:198, DOI: 10.1016/j.buildenv.2021.107914
• Quantification and classification of groundwater-lake water exchange using conventional method, Mahenthiran S., Ganesan M., Vignesh Rajkumar L., Sridhar N., Ecology, Environment and Conservation, Vol:27
• Performance comparison of deep cnn models for detecting driver's distraction, Srinivasan K., Garg L., Datta D., Alaboudi A.A., Jhanjhi N.Z., Agarwal R., Thomas A.G., Computers, Materials and Continua, Vol:68, Issue: 3, Pg.No(4109-4124), DOI: 10.32604/cmc.2021.016736
• Study on influence of Metakaolin and waste marble powder on self-compacting concrete - A state of the art review, Danish P., Mohan Ganesh G., Materials Today: Proceedings, Vol:44, Pg.No(1428-1436), DOI: 10.1016/j.matpr.2020.11.629
• Acid resistance of ternary blended nanosilica concrete incorporating fly ash and alccofine, Reddy A.N., Meena T., Civil Engineering and Architecture, Vol:9, Issue: 2, Pg.No(500-506), DOI: 10.13189/cea.2021.090222
• Bio-electrochemical evaluation of two-stage constructed wetland microbial fuel cells with high strength raw domestic wastewater and simultaneous energy recovery, Thakur S., Das B., Water and Environment Journal, DOI: 10.1111/wej.12714
• Simulation and Analysis of a Factory Building's Energy Consumption Using eQuest Software, Mathews Roy A., Prasanna Venkatesan R., Shanmugapriya T., Chemical Engineering and Technology, DOI: 10.1002/ceat.202000489
• On the possibility of using damaged plasticity models in the assessment of structural response of gravity beams, Nabi J., Rahim A.A., Structures, Vol:33, Pg.No(1987-2002), DOI: 10.1016/j.istruc.2021.05.026
• Performance of vertical flow constructed wetlands planted with indigenous species for decentralized wastewater treatment and biomass production in Kerala, India, Pillai J.S., Brijesh Nair A.N., Nature Environment and Pollution Technology, Vol:20, Issue: 2, Pg.No(541-550), DOI: 10.46488/NEPT.2021.v20i02.010
• Effect of calcium on natural iron rich geo-polymeric binder, Xavier C.S.B., Rahim A., John J., Kumar N.S., Materials Today: Proceedings, Vol:45, Pg.No(4646-4652), DOI: 10.1016/j.matpr.2021.01.096
• Case study on cracks and its paraphernalia, Satapathy A., Dhale Y., Patnaik S., Meena T., Materials Today: Proceedings, Vol:45, Pg.No(3560-3563), DOI: 10.1016/j.matpr.2020.12.1078
• Effect of Soil-Structure Interaction on Seismic Performance of RC Framed Building with Viscous Wall Dampers, Veerapandi A., Visuvasam J., Lecture Notes in Civil Engineering, Pg.No(235-246), DOI: 10.1007/978-981-33-4005-3_19
• Seismic Analysis of Reinforced Concrete Structure Resting on Liquefiable Soil, Narayanan M.S., Antony V.J., Lecture Notes in Civil Engineering, Pg.No(221-233), DOI: 10.1007/978-981-33-4005-3_18
• Enhance the prediction of complex hydrological models by pseudo-simulators, Budamala V., Baburao Mahindrakar A., Geocarto International, Vol:36, Issue: 9, Pg.No(1027-1043), DOI: 10.1080/10106049.2019.1629646
• Urban sprawl modelling and prediction using regression and Seasonal ARIMA: a case study for Vellore, India, Malarvizhi K., Kumar S.V., Porchelvan P., Modeling Earth Systems and Environment, DOI: 10.1007/s40808-021-01170-z
• Identification of Crystalline Mineral Phases of Ornamental Latticed Jallies of Madras High Court Building, Tamil Nadu, Shivakumar M., Selvaraj T., Regattieri E., Rajan, Lecture Notes in Civil Engineering, Vol:111, Pg.No(267-275), DOI: 10.1007/978-981-15-9162-4_21
• Sustainable ecological engineering systems for the treatment of domestic wastewater using emerging, floating and submerged macrophytes, Selvaraj D., Velvizhi G., Journal of Environmental Management, Vol:286, DOI: 10.1016/j.jenvman.2021.112253
• A Study on Factors Affecting the Manual Material Handling Capacity of Indian Male Construction Workers, Ramani P.V., Bhapkar S., Journal of The Institution of Engineers (India): Series A, DOI: 10.1007/s40030-021-00519-y
• Compressive Strength of TBC at Elevated Temperatures with Different Cooling Regimes, Varun Teja K., Meena T., Lecture Notes in Civil Engineering, Vol:111, Pg.No(227-239), DOI: 10.1007/978-981-15-9162-4_18
• Dealing with Multicollinearity Problem in Analysis of Side Friction Characteristics Under Urban Heterogeneous Traffic Conditions, Singh S.G., Kumar S.V., Arabian Journal for Science and Engineering, DOI: 10.1007/s13369-020-05213-y
• A Review of Seismic Vulnerability and Rehabilitation of Reinforced Concrete Structures, Hao A.J., Anwar M.P., Elleithy W., Jayaprakash J., Wai Y.T., Lim Y.K., Lecture Notes in Civil Engineering, Vol:111, Pg.No(23-35), DOI: 10.1007/978-981-15-9162-4_3
• Seismic Analysis of High Rise Steel Structure with Outrigger Braced System, Daniel S., Visuvasam J., Lecture Notes in Civil Engineering, Vol:111, Pg.No(37-45), DOI: 10.1007/978-981-15-9162-4_4
• Evaluation of Rapid Chloride Permeability Test on Concrete Containing Steel, E-Waste Copper Wire and E-Glass Fibres, Gopu G.N., Sofi A., Lecture Notes in Civil Engineering, Vol:111, Pg.No(191-202), DOI: 10.1007/978-981-15-9162-4_15
• Performance of Cantilever Structure Inspired by Tree Patterns, Lim Y.K., Anwar M.P., Jayaprakash J., Elleithy W., Lau T.L., Wong J.Y., Lecture Notes in Civil Engineering, Vol:111, Pg.No(47-59), DOI: 10.1007/978-981-15-9162-4_5
• Durability Properties of Geopolymer Concrete Containing Ground-Granulated Blast Furnace Slag and Black Rice Husk Ash, Sravani T., Ramani P.V., Lecture Notes in Civil Engineering, Vol:111, Pg.No(277-287), DOI: 10.1007/978-981-15-9162-4_22
• Role of NaOH Concentration on Kinetic Ratios of Eco-friendly Geopolymer Concrete Cured Under Ambient Temperature, Kuunreddy S., Bala Murugan S., Lecture Notes in Civil Engineering, Vol:111, Pg.No(203-213), DOI: 10.1007/978-981-15-9162-4_16
• Enhanced Strength, Microstructure, and Thermal properties of Portland Pozzolana Fly ash-based cement composites by reinforcing Graphene Oxide nanosheets, Chintalapudi K., Pannem R.M.R., Journal of Building Engineering, Vol:42, DOI: 10.1016/j.jobe.2021.102521
• A study on the effectiveness of percolation ponds as a stormwater harvesting alternative for a semi-urban catchment, Wadhwa A., Kummamuru P.K., Aqua Water Infrastructure, Ecosystems and Society, Vol:70, Issue: 2, Pg.No(184-201), DOI: 10.2166/aqua.2021.039
• A Review on the Mechanical Properties and Resistance of Blended Fibrous Concrete Composite Towards Impact, Janani S., Santhi A.S., Lecture Notes in Civil Engineering, Vol:111, Pg.No(241-253), DOI: 10.1007/978-981-15-9162-4_19

2020

1. Menon, U., Suresh, N., George, G., Ealias, A.M., Saravanakumar, M.P. “A study on combined effect of Fenton and Free Nitrous Acid treatment on sludge dewaterability with ultrasonic assistance: Preliminary investigation on improved calorific value”, Chemical Engineering Journal”, 2020 Vol. 382, Pg.No. 1230-35.

2. Yadav, A.L., Sairam, V., Muruganandam, L., Srinivasan, K.” An overview of the influences of mechanical and chemical processing on sugarcane bagasse ash characterisation as a supplementary cementitious material”, Journal of Cleaner Production”, 2020 Vol. 47(10), Pg.No. 1934-1945.

3. Saranya, D., Shanthakumar, S.” An integrated approach for tannery effluent treatment with ozonation and phycoremediation: A feasibility study”, Environmental Research”, 2020 Vol. 183,

4. Umamaheswari, J., Shanthakumar, S. “Optimization of temperature and inoculum size for phycoremediation of paddy-soaked rice mill wastewater”, Journal of Environmental Engineering (United States)”, 2020 Vol. 146, Issue 1.

5. Muthukumar, M., Shukla, S.K. “Comparative study on the behaviour of granular pile anchors and helical pile anchors in expansive soils subjected to swelling”, International Journal of Geotechnical Engineering, 2020 Vol. 14, Issue 1.

6. Teja K.V., Meena T. “An insight into temperature characteristics of ternary blended concrete with perlite powder”, Asian Journal of Civil Engineering, 2020, Vol. 9(4), Pg. No. 1229-1236.

7. Balasubramani D.P., Dodagoudar G.R. “Modelling the spatial variability of Standard Penetration Test data for Chennai City using kriging and product-sum model”, Geomechanics and Geoengineering, 2020.

8. Athiyamaan V., Mohan Ganesh G. “Experimental, statistical and simulation analysis on impact of micro steel – Fibres in reinforced SCC containing admixtures”, Construction and Building Materials, 2020 Vol. 246.

9. Vali K.S., Bala Murugan S. “Effect of different binders on cold-bonded artificial lightweight aggregate properties”, Advances in Concrete Construction, 2020 Vol. 9, Pg. No 183-193.

10. Palakuru M., Adamala S., Bachina H.B. “Modeling yield and backscatter using satellite derived biophysical variables of rice crop based on artificial neural networks”, Journal of Agrometeorology, 2020 Vol. 21, Pg. No. 171-175.

11. Kuun Reddy S.R., Bala Murugan S. “Experimental and microstructural assessment of ternary blended geopolymer concrete with different Na2SiO3-to-NaOH volume ratios”, Innovative Infrastructure Solutions, 2020.

12. John J., Bindu G., Srimuruganandam B., Wadhwa A., Rajan P. “Land use/land cover and land surface temperature analysis in Wayanad district, India, using satellite imagery”, Annals of GIS, 2020.

13. Mary Ealias A., Saravanakumar M.P. “A critical review on ultrasonic-assisted dye adsorption: Mass transfer, half-life and half-capacity concentration approach with future industrial perspectives”, Critical Reviews in Environmental Science and Technology, 2020, Vol. 49 , (21).

14. Kolathayar S., Sitharam T.G., Yang S. “Coastal reservoir strategy to enhance India’s freshwater storage by impounding river flood waters: A detailed overview”, Water Science and Technology: Water Supply, 2020, Vol. 19, Pg. No. 703-717.

15. Vigneshwaran S., Kumar S.V. “Urban land cover mapping and change detection analysis using high resolution sentinel-2A data”, Environment and Natural Resources Journal, 2020, Vol. 17, No. 1.

16. Kumar M.S., Senthilkumar R., Sourabha L. “Seismic performance of special concentric steel braced frames”, Structures, 2020.

17. Reddy A.N., Meena T. “An experimental study to find the optimum dosage of admixtures in blended concrete”, International Journal of Recent Technology and Engineering, 2020.

18. Venkatesan E., Mahindrakar A.B. “Forecasting floods using extreme gradient boosting – A new approach”, International Journal of Civil Engineering and Technology, 2020, Vol.10(2) , Pg. No. 1336-1346.

19. Manojkumar N., Srimuruganandam B. “Assessment of gaseous emissions and radiative forcing in Indian forest fires”, International Journal of Environmental Studies, 2020, Vol. 76, (4).

20. Vali K.S., Murugan S.B. “Properties of glass fiber reinforced cold-bonded artificial lightweight aggregates with different binders”, Revista Romana de Materiale/ Romanian Journal of Materials, 2020, Vol. 50(1),Pg. No. 40-50.

21. Jayasingh S., Selvaraj T. “Effect of Natural Herbs on Hydrated Phases of Lime Mortar”, Journal of Architectural Engineering, 2020, Vol. 26, Issue 3.

22. Teja K.V., Meena T. “Performance of ternary blended concrete and binary concrete made with Perlite powder at elevated temperatures”, Jordan Journal of Civil Engineering, 2020, Vol.14(2), Pg. No.198-209.

23. Durgadevagi S., Thirumalini S., Ravi R., Simona R. “Interaction of a viscous biopolymer from cactus extract with cement paste to produce sustainable concrete”, Construction and Building Materials, 2020, vol. 257,119585.

24. Tang V.T., Rene E.R., Fu D.F., Singh R.P., Behera S.K., Pugazhendhi A., “Effect of mixed microbial culture addition on enhanced river water quality: Pollutant removal and microbial community characteristics”, Environmental Technology and Innovation, 2020, Vol.18.

25. Hema Sumanth B., Vasugi K., “Effect of w/c ratio on the corrosion of rebar embedded in high strength concrete”, Journal of Corrosion Science and Engineering, 2020, Vol.23.

26. George G., Saravanakumar M.P., “Fabrication and performance analysis of a low cost, Pt free counter electrode using carbon coated ZnAl layered double hydroxide (C/ZnAl-LDH) for dye sensitized solar cells”, Solar Energy, 2020, Vol.202, Pg.No.144-154.

27. Nagajothi S., Elavenil S., “Effect of GGBS Addition on Reactivity and Microstructure Properties of Ambient Cured Fly Ash Based Geopolymer Concrete”, 2020, Silicon.

28. Devulapalli L., Kothandaraman S., Sarang G., “Effect of rejuvenating agents on stone matrix asphalt mixtures incorporating RAP”, Construction and Building Materials, 2020, Vol.254.

29. Palakuru M., Adamala S., Bachina H.B., “Spatial mapping of rice crop evapotranspiration in Godavari command area”, Indian Journal of Ecology, 2020, Vol.47, Issue 2, Pg.No.361-364.

30. Velvizhi G., Shanthakumar S., Das B., Pugazhendhi A., Priya T.S., Ashok B., Nanthagopal K., Vignesh R., Karthick C., “Biodegradable and non-biodegradable fraction of municipal solid waste for multifaceted applications through a closed loop integrated refinery platform: Paving a path towards circular economy”, Science of the Total Environment, 2020, Vol.731.

31. Warudkar A., Elavenil S., “A comprehensive review on abrasion resistance of concrete”, International Journal of Applied Science and Engineering, 2020, Vol.17, Issue 1.

32. Krishnan V., Solaiyan E., “Study on engineering and microstructural properties of ambient cured GP concrete produce from GGBS and M-Sand", Journal of Critical Reviews, 2020, Vol.7, Issue 7, Pg.No.499-506.

33. Desireddy S., P.C. S., R.L. M., Mehta A., “Development of an up-flow anoxic nano-biotechnological reactor for simultaneous removal of ammonia and COD from low C/N secondary treated wastewater”, Journal of Water Process Engineering, 2020, Vol.36.

34. Karthiyaini S., Sivakumar R., Shanmuga Sundaram M., “Market response of real estate and automotive industry during pandemic-a transdisciplinary approach”, International Journal of Management, 2020, Vol.11, Issue 5, Pg.No.764-769.

35. Danish P., Mohan G.G., "Behaviour of self-compacting concrete using different mineral powders additions in ternary blends”, Revista Romana de Materiale/ Romanian Journal of Materials, 2020, Vol.50, Issue 2, Pg.No.232-239.

36. Odelli E., Selvaraj T., Perumal J., Palleschi V., Legnaioli S., Raneri S., “Pottery production and trades in Tamil Nadu region: new insights from Alagankulam and Keeladi excavation sites”, Heritage Science, 2020, Vol.8, Issue 1.

37. Sarumathi K., Elavenil S., “Mathematical modeling to develop a simple nano to macro structure concrete-based model”, Revista Romana de Materiale/ Romanian Journal of Materials, 2020, Vol.50, Issue 2, Pg.No.183-190.

38. Nabi J., Abdul R.A., “Employing B-Spline approach in parametric assessment of catenary shaped fabric-formed concrete beams”, Structures, 2020, Vol.27, Pg.No.474-486.

39. Harsha Vardhana Balaji M., Venugopal P., “Cost overrun factors: Exploration from the perspective of civil workers”, International Journal of Advanced Science and Technology, 2020, Vol.29, Pg.No.2241-2245.

40. Vali K.S., Murugan B.S., Reddy S.K., Farsangi E.N., “Eco-friendly hybrid concrete using pozzolanic binder and glass fibers”, International Journal of Engineering, Transactions A: Basics, 2020, Vol.33, Issue 7, Pg.No.1183-1191.

41. Varghese J., Rehaan Chandan M., Shanthakumar S., “Fixed bed column study for pesticide removal using silver nanoparticles-embedded polyurethane foam and glass beads”, Chemical Engineering Communications, 2020, Vol.207, Issue 10.

42. George G., Yendaluru R.S., Mary Ealias A., "Fabrication of Dye-Sensitized Solar Cells using natural flower dye extracts: A study on performance analysis and solar dye degradation”, Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 2020.

43. Thakur S., Das B., “Performance evaluation of microbial fuel cell with sewage wastewater and RO concentrate using composite anode made of Luffa aegyptiaca”, Environmental Progress and Sustainable Energy, 2020.

44. Manojkumar N., Manish Kumar M., Somwanshi S.K., Monish Raj M., Srimuruganandam B., "Estimation of PM2.5-Related Hospital Admissions and Its Monetary Burden in Hyderabad, India”, Lecture Notes in Civil Engineering, 2020, Vol.71, Pg.No.1-10.

45. Jayasingh S., Selvaraj T., Raneri S., “Evaluating the Impact of Organic Addition and Aggregate Gradation on Air Lime Mortar: New Compatible Green Material for Heritage Application”, International Journal of Architectural Heritage, 2020.

46. Pandi D., Kothandaraman S., Kuppusamy M., “Delineation of potential groundwater zones based on multicriteria decision making technique”, Journal of Groundwater Science and Engineering, 2020, Vol.8, Issue 2, Pg.No.180-194.

47. Subramanian N., Solaiyan E., “Study on bond strength of geopolymer and control concrete between fiber-reinforced polymer and steel bars”, Structural Concrete, 2020.

48. Nagajothi S., Elavenil S., “Experimental investigations on compressive, impact and prediction of stress-strain of fly ash-geopolymer and portland cement concrete”, Journal of Polymer Engineering, 2020.

49. Ealias A.M., Saravanakumar M.P., “Application of protein-functionalised aluminium nanosheets synthesised from sewage sludge for dye removal in a fixed-bed column: Investigation on design parameters and kinetic models”, Environmental Science and Pollution Research, 2020, Vol.27, Pg.No.2955-2976.

50. Kumar S., Bharti R., Gupta P., Sofi A., “Study on Mechanical and Durability Properties of Recycled Coarse Aggregate in Concrete”, Lecture Notes in Civil Engineering, 2020, Vol.46, Pg.No.303-313.

51. Balagopal V., Sambamurthy V., “Performance evaluation of coir pith ash blended cement concrete exposed to elevated temperature”, Jurnal Teknologi, 2020, Vol.82, Issue 2, Pg.No.93-100.

52. Giraka O., Selvaraj V.K., “Short-term prediction of intersection turning volume using seasonal ARIMA model”, Transportation Letters, 2020, Vol.12, Issue 7, Pg.No.483-490.

53. Saranya D., Shanthakumar S., “Effect of culture conditions on biomass yield of acclimatized microalgae in ozone pre-treated tannery effluent: A simultaneous exploration of bioremediation and lipid accumulation potential”, Journal of Environmental Management, 2020, Vol.273.

54. Lischi S., Odelli E., Perumal J.L., Lucejko J.J., Ribechini E., Mariotti Lippi M., Selvaraj T., Colombini M.P., Raneri S., “Indian Ocean trade connections: characterization and commercial routes of torpedo jars”, Heritage Science, 2020, Vol.8, Issue 1.

55. Kakria K., Thirumalini S., Secco M., Shanmuga Priya T., “A novel approach for the development of sustainable hybridized geopolymer mortar from waste printed circuit boards”, Resources, Conservation and Recycling, 2020, Vol.163.

56. Balasubramani D.P., Gopalakrishnan V., “Subsurface object detection and characterization using Ground Penetrating Radar”, Innovative Infrastructure Solutions, 2020, Vol.5, Issue 3.

57. Loganathan P., Mahindrakar A.B., “Evaluation of surface temperature and prediction of changes in future projections using quantile to quantile change factor methodology over cauvery river basin-peninsular India”, Indian Journal of Ecology, 2020, Vol.47, Issue 2, Pg.No.312-315.

58. Chintalapudi K., Pannem R.M.R., “The effects of Graphene Oxide addition on hydration process, crystal shapes, and microstructural transformation of Ordinary Portland Cement”, Journal of Building Engineering, 2020, Vol.32.

59. Kumar V., Kumar A., Sofi A., “Study on Geo-polymer Concrete Under Acidic and Saline Conditions”, Lecture Notes in Civil Engineering, 2020, Vol.46, Pg.No.291-302.

60. Budamala V., Mahindrakar A.B., “Approximation of Metro Water District Basin Using Parallel Computing of Emulator Based Spatial Optimization (PCESO)”, Water Resources Management, 2020, Vol.34, Pg.No.121-137.

61. Subramanian N., Elavenil S., “GGBFS & M-sand impact on workability and strength properties of fly-ash based geopolymer concrete”, Indian Journal of Engineering and Materials Sciences, 2020, Vol.27, Issue 1, Pg.No.67-76.

62. Sujay H.M., Nair N.A., Sudarsana Rao H., Sairam V., “Experimental study on durability characteristics of composite fiber reinforced high-performance concrete incorporating nanosilica and ultra fine fly ash”, Construction and Building Materials, 2020, Vol.262.

63. Balamurugan G., Viswanathan T.S., “Comparative study on CFRP and GFRP composite in strengthening of RC slab”, International Journal of Emerging Trends in Engineering Research, 2020, Vol.8, Issue 9, Pg.No.5424-5429.

64. Wadhwa A., Pavan Kumar K., “Selection of best stormwater management alternative based on storm control measures (SCM) efficiency indices”, Water Policy, 2020, Vol.22, Issue 4, Pg.No.702-715.

65. Giraka O., Kumar S.V., “Measurement of Mode-Wise Individual Delay Components and Prediction of Queue Length at a Signalized Intersection Under Heterogeneous Traffic Conditions”, Journal of The Institution of Engineers (India): Series A, 2020, Vol.101, Pg.No.753-770.

66. Danish P., Mohan Ganesh G., “Durability properties of self-compacting concrete using different mineral powders additions in ternary blends", Revista Romana de Materiale/ Romanian Journal of Materials, 2020, Vol.50, Issue 3, Pg.No.369-378.

67. Rajumon R., Aravind S.P., Bhuvaneshwari S., Ranjitha J., Mohanraj P., “Removal of cadmium heavy metal ions from wastewater by electrosorption using modified activated carbon felt electrodes”, Water Science and Technology, 2020, Vol.82, Issue 7, Pg.No.1430-1444.

68. Loganathan P., Mahindrakar A.B., “Assessment of changes in observed rainfall and prediction of future conditions using quantile delta mapping bias correction technique over cauvery River Basin, India”, Indian Journal of Ecology, 2020, Vol.47, Issue 3, Pg.No.708-711.

69. Vijayaraghavan G., Shanthakumar S., “Removal of crystal violet dye in textile effluent by coagulation using algal alginate from brown algae sargassum sp”, Desalination and Water Treatment, 2020, Vol.196, Pg.No.402-408.

70. Adamala S., Srivastava A., Bachina H.B., Palakuru M., “Evaluation of VIC, ANN and Empirical Models for Estimating Daily Reference Evapotranspiration”, Indian Journal of Ecology, 2020, Vol.47, Pg.No.29-36.

71. Loganaganandan M., Murali G., Salaimanimagudam M.P., Haridharan M.K., Karthikeyan K., “Experimental Study on GFRP Strips Strengthened New Two Stage Concrete Slabs under Falling Mass Collisions”, KSCE Journal of Civil Engineering, 2020.

72. Thakur R., Barik D.K., “Impact of Temporal Variation of Land Use/Land Cover and Precipitation on Runoff Estimation in an Ungauged Hilly Watershed in Kodagu”, Watershed Management 2020: A Clear Vision of Watershed Management, Pg.No.265-277.

73. Balamurugan G., Viswanathan T.S., “Evaluation of the effects of orientation and coverage areas of FRP lamination bonded with two-way RC slabs a modular approach”, Civil Engineering and Architecture, 2020, Vol.8, Issue 4, Pg.No.706-713.

74. Umamaheswari J., Kavitha M.S., Shanthakumar S., “Outdoor cultivation of Chlorella pyrenoidosa in paddy-soaked wastewater and a feasibility study on biodiesel production from wet algal biomass through in-situ transesterification”, Biomass and Bioenergy, 2020, Vol.143.

75. Narmadha V.V., Jose J., Patil S., Farooqui M.O., Srimuruganandam B., Saravanadevi S., Krishnamurthi K., “Assessment of Microplastics in Roadside Suspended Dust from Urban and Rural Environment of Nagpur, India”, International Journal of Environmental Research, 2020, Vol.14, Pg.No.629-640.

76. Vignesh V., Mayakrishnan M., “Design parameters and behavior of helical piles in cohesive soils A review”, Arabian Journal of Geosciences, 2020, Vol.13, Issue 22.

77. Vijayan V., Santhi M.H., Mohan R., “Seismic Performance of High Rise Buildings with Different Types of Shear Wall”, IOP Conference Series: Materials Science and Engineering, 2020, Vol.936, Issue 1.

78. Nair N.A., Sairam V., “Research initiatives on the influence of wollastonite in cement-based construction material- A review”, Journal of Cleaner Production, 2020.

79. Parimalarenganayaki S., “Managed Aquifer Recharge in the Gulf Countries: A Review and Selection Criteria”, Arabian Journal for Science and Engineering, 2020.

80. Manojkumar N., Srimuruganandam B., “Health benefits of achieving fine particulate matter standards in India - A nationwide assessment”, Science of the Total Environment, 2020.

81. Francy N., Shanthakumar S., Chiampo F., Sekhar Y.R., “Remediation of lead and nickel contaminated soil using nanoscale zero-valent iron (Nzvi) particles synthesized using green leaves: First results”, Processes, 2020, Vol.8, Issue 11, Pg.No.1-12.

82. Jithendra C., Elavenil S., “Sustainable Self-Compacting Geopolymer Concrete under Ambient Curing-Durability Properties”, IOP Conference Series: Earth and Environmental Science, 2020, Vol.573, Issue 1.

83. Prem Kumar V., Vasugi V., “Bamboo materials in cement, geopolymer and reinforced concrete as sustainable solutions for better tomorrow”, IOP Conference Series: Earth and Environmental Science, 2020, Vol.573, Issue 1.

84. Saravanan S.S., Jagadeesh P., “Evaluation of strength and durability properties of sustainable concrete paver blocks using manufactured sand as fine aggregates”, Journal of Green Engineering, 2020, Vol.10, Issue 10, Pg.No.7905-7916.

85. Palakurua M., Yarrakula K., “A comparison study of space borne Dual Polarization Difference Index (Sea Wind SCATSAT-1 Scatterometer) and NDVI (MODIS) on paddy crop growth”, Indian Journal of Geo-Marine Sciences, 2020, Vol.49, Issue 9, Pg.No.1580-1586.

86. Hareendranathan G., Stella J.J., Selvaraj T., Murugan N., “GROUTING AND INJECTION TECHNIQUES TO REPAIR CRACKS AND WATER LEAKAGE AT the RENUKA DEVI TEMPLE, CHANDRAGUTTI, INDIA [POPRAVLJANJE RAZPOK S TEHNIKAMI OMETAVANJA IN NABRIZGAVANJA V TEMPLJU RENUKA DEVI, CHANDRAGUTTI, INDIJA]”, Materiali in Tehnologije, 2020, Vol.54, Issue 5, Pg.No.633-642.

87. Reddy P.N., Jindal B.B., Kavyateja B.V., Narender Reddy A., “Strength enhancement of concrete incorporating alccofine and SNF based admixture”, Advances in Concrete Construction, 2020, Vol.9, Issue 4, Pg.No.345-354.

88. Reddy A.N., Reddy P.N., Kavyateja B.V., Reddy G.G.K., “Influence of nanomaterial on high-volume fly ash concrete: a statistical approach”, Innovative Infrastructure Solutions, 2020, Vol.5, Issue 3.

89. Rajan R., Babu P.R., Senthilnathan K., “Light harvesting using solar cells and luminescent solar concentrators”, Current Science, 2020, Vol.118, Issue 11, Pg.No.1652-1655.

90. Devulapalli L., Kothandaraman S., Sarang G., “Microstructural characterisation of reclaimed asphalt pavement with rejuvenators”, International Journal of Pavement Engineering, 2020, Pg.No.1-12.

91. Loganathan P., Mahindrakar A.B., “Assessment and ranking of CMIP5 GCMs performance based on observed statistics over Cauvery river basin Peninsular India”, Arabian Journal of Geosciences, 2020, Vol.13, Issue 22.

92. Manojkumar N., Monishraj M., Srimuruganandam B., “Commuter exposure concentrations and inhalation doses in traffic and residential routes of Vellore city, India”, Atmospheric Pollution Research, 2020.

93. Varsha S.S.V., Soomro A.F., Baig Z.T., Vuppaladadiyam A.K., Murugavelh S., Antunes E., "Methane production from anaerobic mono- and co-digestion of kitchen waste and sewage sludge: synergy study on cumulative methane production and biodegradability”, Biomass Conversion and Biorefinery, 2020.

94. Yadav A.L., Sairam V., Srinivasan K., Muruganandam L., “Synthesis and characterization of geopolymer from metakaolin and sugarcane bagasse ash”, Construction and Building Materials, 2020, Vol.258.

95. Ganesh S., Danish P., Anita Jessie J., Ganie M.A., Raina C.S., “Experimental study on self-healing concrete with the effect of bacillus subtilis bacteria to improve the strength and sustainability of the concrete”, Journal of Green Engineering, 2020, Vol.10, Issue 4, Pg.No.1909-1923.

96. Umamaheswari J., Bharathkumar T., Shanthakumar S., Gothandamb K.M., “A feasibility study on optimization of combined advanced oxidation processes for municipal solid waste leachate treatment”, Process Safety and Environmental Protection, 2020, Vol.143, Pg.No.212-221.

97. Janani S., Santhi A.S., “Failure of concrete under impact: an experimental investigation and its numerical prediction”, Asian Journal of Civil Engineering, 2020, Vol.21, Pg.No.1415-1429.

98. Chintalapudi K., Pannem R.M.R., “An intense review on the performance of Graphene Oxide and reduced Graphene Oxide in an admixed cement system”, Construction and Building Materials, 2020, Vol.259.

99. Selvaraj T., Srinivasan V., Raneri S., Fernando M., Kakria K., Jayasingh S., “Response of organic lime mortars to thermal and electrical shocks due to lightning strikes”, Sustainability (Switzerland), 2020, Vol.12, Issue 17.

100. Vasugi K., Elavenil S., Hema Sumanth B., “Forecasting compressive strength of ambient cured GGBS based sustainable geopolymer concrete by ML technique”, Journal of Green Engineering, 2020, Vol.10, Issue 7, Pg.No.4095-4111.

101. Budamala V., Baburao Mahindrakar A., “Integration of Adaptive Emulators and Sensitivity Analysis for Enhancement of Complex Hydrological Models”, Environmental Processes, 2020, Vol.7, Pg.No.1235-1253.

102. Umamaheswari J., Shanthakumar S., “Paddy-soaked rice mill wastewater treatment by phycoremediation and feasibility study on use of algal biomass as biofertilizer”, Journal of Chemical Technology and Biotechnology, 2020.

103. Jose J., Srimuruganandam B., “Application of micro-morphology in the physical characterization of urban road dust”, Particuology, 2020.

104. Balagopal V., Viswanathan T.S., “Effect of elevated temperature on performance of concrete containing supplementary cementitious material derived from coir industry”, International Journal of Emerging Trends in Engineering Research, 2020, Vol.8, Issue 8, Pg.No.4496-4501.

105. Baldev D., Kumar A., Tiwari S., Muthukumar M., Shukla S.K., “Utilization of bagasse ash in the compacted clay liner”, Lecture Notes in Civil Engineering, 2020, Vol.89, Pg.No.297-302.

106. Yeddula B.S.R., Somasundaram K., “Effect of red mud proportion on the strength and microstructure of ferrosialate based geopolymer mortar”, Indian Journal of Engineering and Materials Sciences, 2020, Vol.27, Issue 3, Pg.No.554-563.

107. Sujatha G., Shanthakumar S., Chiampo F., “UV light-irradiated photocatalytic degradation of coffee processing wastewater using tio2 as a catalyst”, Environments - MDPI, 2020, Vol.7, Issue 6, Pg.No.1-13.

108. Iqbal T.H.P.K.M., Yarrakula K., “Probabilistic flood inundation mapping for sparsely gauged tropical river”, Arabian Journal of Geosciences, 2020, Vol.13, Issue 18.

109. Rakshith B.D., Suneel Kumar M., “Behaviour of steel columns with realistic boundary restraints under standard fire”, Structures, 2020, Vol.28, Pg.No.626-637.

110. Selvaraj T., Yadav A., Bahuguna H., Drewnowski J., Ganesapillai M., “Ancient settlements-atavistic solutions for present water supply and drainage problems engendered by urbanism”, Environment, Development and Sustainability, 2020.

111. Deepa Nivethika S., Sreeja B.S., Radha S., Senthilpandian M., “Polymer resin coating over dielectric elastomer for effective stretchable RF devices”, Journal of Optoelectronics and Advanced Materials, 2020, Vol.22, Issue 43924, Pg.No.176-181.

112. Iwendi C., Bashir A.K., Peshkar A., Sujatha R., Chatterjee J.M., Pasupuleti S., Mishra R., Pillai S., Jo O., “COVID-19 patient health prediction using boosted random forest algorithm”, Frontiers in Public Health, 2020, Vol.8.

2019

1.Kolathayar, S., Sitharam, T.G., & Yang, S. “Coastal reservoir strategy to enhance Indias fresh water storage by impounding river flood waters: a detailed overview”, Water Science and Technology –Water Supply, 2019 Vol. 19, Pg. No. 703-717

2.Venkatesh, B., Mahindrakar, A.B. “Improving the hydrological model efficiency using emulator based optimization (EBO)”, International Journal of Civil Engineering and Technology”, 2019 Vol. 8, Pg. No. 1825-1834

3.Yap Kian Lim, Anwar Mohammed Parvez, Jayaprakash Jaganathan, Wael Elleithy, Lau Teck Leong, Yeong Tuck Wai. “Feasilibity of Replication and Optimization of Nature Design Shapes in Civil Engineering Structrures to Enhance Performance and Efficiency: A review”, “International Journal of Innovative Technology and Exploring Engineering (IJITEE)”, 2019 Vol. 8, Pg. No. 79-86

4.Jithin Jose, Srimuruganandam B and Shiva Nagendra S M, “Characterization of PM10 and PM2.5 Emission Sources”, “Nature, Environment and Pollution Technology”, 2019 Vol.18, Pg. No. 555-562

5.Bala Rama Krishna C H, and Jagadesh P. “Strength and durability assessment of binary blended self-compacting concrete replacing partial sand with electronic plastic waste”, “International Journal of Innovative technology and exploring engineering”, 2019 Vol.8, Pg. No. 107-111

6.Anu Mary Ealias, Saravanakumar M P. “A Critical Review on Ultrasonic assisted dye adsorption: Mass transfer, Half-life and Half capacity concentration approach with future industrial perspectives”, Critical Reviews in Environmental Science and Technology”, 2019 Vol.1, Pg. No. 1-57

7.Rahul Roy, Sairam V. “Effect of Silica Fume and Foundry waste sand on strength characteristics of Geogrid and Fero cement panel”, “Materials Today: Proceedings”, 2019 Vol.7, Pg. No.362-372

8.Priya M P, Santhi A S. “Punching Shear Behaviour of Fibre Reinforced Flat Slab Under Different Support Conditions”, “International Journal of Innovative Technology and Exploring Engineering (IJITEE)”, 2019 Vol. 8, Pg. No. 178-184

9.Meena T. “A study on the effect of colloidal nano-silica on blended concrete containing fly ash and alccofine”, “Romanian Journal of Materials”, 2019 Vol. 49, Pg. No. 217-224

10.Thirumalini Selvaraj, Sri RAM Pradeep. “Identification of Bio-Minerals and Their Origin in Lime Mortars of Ancient Monument: Thanjavur Palace”, “International Journal of Architectural Heritage”, 2019 Vol. 13, Pg. No. 1-12

11.Janani S, Santhi A S. “Multiple linear regression model to predict mechanicalproperties and impact resistance of hooked-end steel fibre-reinforced blended concrete”, “Romanian Journal of Materials”, 2019 Vol. 13, Pg. No. 207-216

12.Palakuru M, Yarrakula K, Chaube N R, Sk K B, Satyaji Rao Y R. “Identification of paddy crop phenological parameters using dual polarized SCATSAT-1 (ISRO, India) scatterometer data”, “Environmental Science and Pollution Research”, 2019 Vol. 6, Pg. No. 3692-3697

13.Kolathayar S, Suja P, Nair V, Krishna, S & Tamilarasi G. “Performance evaluation of seashell and sand as infill materials in HDPE and coir geocells”, “Innovative Infrastructure Solutions”, 2019 Vol. 4, Pg. No. 17-24

14.Vignesh Kumar M and Kiran Yarrakula. “Enhancement of Limestone Mineral Identification Using Hyperion Imagery: a case study from Tirunelveli district, Tamil Nadu, South India”, “Arabian Journal of Geosciences”, 2019 Vol.12, Pg. No. 1-11

15.Kavitha M S, Murugavelh S. “Optimization and transesterification of sterculia oil: Assessment of engine performance, emission and combustion analysis”, “Journal of Cleaner Production”, 2019 Vol. 234, Pg. No. 1192-1209

16.Gopi P and Kiran Yarrakula, YRS Rao. “Thresholding Technique for Flood Extent Mapping Using Dual Polarization ENVISAT ASAR Data”, “Indian Journal of Geo-Marine Sciences”, 2019 Vol. 48, Pg. No. 363-368

17.Ramkrishnan R, Kolathayar S, & Sitharam T G. “Seismic Hazard Assessment and Land Use Analysis of Mangalore City, Karnataka, India”, “Journal of Earthquake Engineering”, 2019 Vol. 22, Pg. No. 0

18.Ramkrishnan R, Sreevalsa Kolathayar, & Sitharam, T G. “Development of New Ground Motion Prediction Equation for the North and Central Himalayas Using Recorded Strong Motion Data”, Journal of Earthquake Engineering”, 2019 Vol. 23, Pg. No. 1-24

19.Abdurra’ uf Mukhtar Gora, Jayaprakash Jaganathan, Mohammed Parvez Anwar, Hau Y Leung. “Flexural capacity of bi-directional GFRP strengthened RC beams with end anchorages anchorages: Experimental and theoretical studies”, “International Journal of Structural Integrity”, 2019 Vol.10, Pg. No. 188-207

20.Manojkumar N, Khadar Basha B, Srimuruganandam. “Assessment, prediction and mapping of noise levels in Vellore city, India”, “Noise Mapping”, 2019 Vol. 6, Pg. No. 38-51

21.Thirumalini Selvaraj, Ravi, Ramadoss, Abrar, Ahamed. “Alternative Approach for Traditional Slaking and Grinding of Air Lime Mortar for Restoration of Heritage Structures: Natural Polymer”, “Journal of Architectural Engineering”, 2019 Vol. 25, Pg. No. 188-207

22.Suneel Kumar M, Senthilkumar R, Sourabha L. “Seismic performance of special concentric steel braced frames”, “Structures”, 2019 Vol. 20, Pg. No. 166-175

23.Narender Reddy A, Meena T. “An experimental study to find the optimum dosage of admixtures in blended concrete”, “International Journal of Recent Technology and Engineering”, 2019 Vol. 7, Pg. No.1062-1065

24.Muthukumar M and Shukla S K. “Influence of fibre on volume change attributes of expansive soils blended with lime”, “Proceedings of Institution of Civil Engineers: Ground Improvement”, 2019 Vol. 172, Pg. No. 37-43

25.Srinivasa Rao Naraganti, Rama Mohan Rao Pannem and Jagadeesh Putta. “A Impact resistance of hybrid fibre reinforced concrete containing sisal fibres”, “Ain Shams Engineering Journal”, 2019

26.Nagamalleswara Rao k Juma Haydary. “Studies on Sulfur Recovery Plant performance using Aspen HYSYS Sulsim simulation”, “Petroleum and Coal”,2019, Vol. 61, Pg. No. 292-305

27.Padmapriya J, Vijayaraghavan G, Shanthakumar S. “Adsorption Potential of Water Hyacinth on Removal of Direct Blue 2 Dye from Aqueous Solution: Isotherm, Kinetics and Thermodynamics Studies”, “Indian Journal of Environmental Protection”, 2019, Vol. 39, Pg. No. 437-444

28.Saranya D, Shanthakumar S. “Opportunities for Phycoremediation Approach in Tannery Effluent: A Treatment Perspective”, “Environmental Progress & Sustainable Energy”, 2019, Vol. 38, Pg. No. 1-13

29.Saranya D, Shanthakumar S. “Green microalgae for combined sewage and tannery effluent treatment: Performance and lipid accumulation potential”, “Journal of Environmental Management”, 2019, Vol. 241, Pg. No. 167-178

30.Umamaheswari J, Shanthakumar S. “Phytoremediation of Nutrient Overloaded Soil by Rice Mill Wastewater Using Amaranthus palmeri and Sorghum vulgare”, “Environmental Progress & Sustainable Energy”, 2019, Vol. 38, Pg. No. 354-361

31.Ganapathy G P, Zaalishvili V B, Mel’kov D A, Dzeranov B V, Chenov Yu K and Kanukov A S. “Soil Liquefaction Susceptibility Assessment of Mozdok City (North Ossetia)”, “Advances in Engineering Research”, 2019, Vol. 182, Pg. No. 97-101

32.Parimalarenganayaki S, and Elango L. “Variations in stable isotopes of oxygen and hydrogen in surface and groundwater of a Managed Aquifer Recharge site: A case study”, “Journal of the Geological Society of India”, 2019, Vol. 93, Pg. No. 533-538

33.Vigneshwaran S, and Vasantha Kumar S. “Urban Land Cover Mapping and Change Detection Analysis Using High Resolution Sentinel-2A Data”, “Environment and Natural Resources Journal”, 2019, Vol. 17, Pg. No. 22-32

34.Meena T. “Experimental Study on the Strength and Durability of High Performance Nano Silica Concrete”, “International Journal of Innovative Technology and Exploring Engineering”, 2019, Vol. 8, Pg. No.1141-1144

35.Venkatesan E, Mahindrakar A B. “Forecasting floods using extreme gradient boosting – A new approach”, “International Journal of Civil Engineering and Technology”, 2019, Vol. 10, Pg. No. 1336-1346

36.Narender Reddy A, Meena T. “The effect of Nano silica on Mechanical Properties of Concrete”, “International Research Journal of Applied Sciences”, 2019, Vol. 1, Pg. No. 36-40

37.Sofi A, Sharma K, Verma M, Panda, P.P. “Influence of marble powder and steel fibre in concrete on various mechanical and durability properties”, “Indian Concrete Journal”, 2019, Vol. 93, Pg. No. 71-76

38.Kavitha M S & Murugavelh S. “Biodiesel production from reactive extraction of Sterculia and waste cooking oil blend using an acid catalyst”, “International Journal of Ambient Energy”, 2019, Vol. 40, Pg. No. 1-6

39.Manojkumar N, Srimuruganandam B, Shiva Nagendra S M. “Application of multiple-path particle dosimetry model for quantifying age specified deposition of particulate matter in human airway”, “Ecotoxicology and Environmental Safety”, 2019, Vol. 168, Pg. No. 241-248

40.Manoj Kumar N, and Srimuruganandam B. “Assessment of gaseous emissions and radiative forcing in Indian forest fires”, “International Journal of Environmental Studies”, 2019, Vol. 76, Pg. No. 541-557

41.Ravikumar K V G, Aditya Sekhar Singh, Divyanshu Sikarwar, Geetha Gopal, Bhaskar Das, Mrudula P, Chandrasekaran Natarajan, Amitava Mukherjee. “Enhanced tetracycline removal by in-situ NiFe nanoparticles coated sand in column reactor”, “Journal of Environmental Management”, 2019, Vol. 236, Pg. No. 93-99

42.B Das, Thakur S, Chaithanya M S, Biswas P. “Batch investigation of constructed wetland microbial fuel cell with reverse osmosis (RO) concentrate and wastewater mix as substrate”, “Biomass and Bioenergy”, 2019, Vol. 122, Pg. No. 231-237

43.Shanmuga Priya T, Srinivasan K, and Prabhath K J. “Aerobic composting: studies on variation in Parameters by Thumboormuzhi model”, “Ecology Environment & Conservation”, 2019, Vol. 25, Pg. No. 379-384

44.Anita Jessie J, and Santhi A S. “Effect of Temperature on Compressive Strength of Steel Fibre Reinforced Concrete”, “Journal of Applied Science and Engineering”, 2019, Vol.22, Pg. No. 233-238

45.Varun Teja K, Meena T. “Experimental Study on Mechanical Properties and Micro- Structure of Perlite Powder Concrete Subjected to Elevated Temperatures”, “International Journal of Recent Technology and Engineering”, 2019, Vol. 7, Pg. No. 1350-1357

46.Awoyera O, Karthik S,Rama MohanRao P, Gobinath R. “Experimental and numerical analysis of large-scale bamboo-reinforced concrete beams containing crushed sand”, “Journal of Innovative Infrastructure solutions”, 2019, Vol. 4, Pg. No. 1-15

47.Vali K S, Bala Murugan S. “Utilization of cementitious materials with cold-bonded artificial aggregate in concrete”, “International Journal of Engineering and Advanced Technology”, 2019, Vol. 9, Pg. No. 385-388

48.Srinivasreddy K, Balamurugan S. “Effect of alccofine 1203 on setting times and strength of ternary blended geopolymer mixes with msand cured at ambient temperature”, “Revista Romana de Materiale/ Romanian Journal of Materials”, 2019, Vol. 49, Pg. No. 527-534

49.Ajeesh S S, Arul Jayachandran S. “Direct Strength Design of Cold Formed Steel Members Using Constrained Spline Finite Strip Method”, “International Journal of Steel Structures”, 2019, Vol. 19, Pg. No. 1801-1813

50.Barik D K. “A Need of Climate Smart and Sustainable Agriculture in India”, “ACTA SCIENTIFIC AGRICULTURE”, 2019, Vol.3, Pg. No. 1-3

51.Vinayagamoorthy M, Mohan Ganesh G, Santhi A S. “Structural robustness of a single span extra dosed bridge over cable stayed bridge”, “Journal of Applied Science and Engineering”, 2019, Vol. 22, Pg. No. 413- 420

52.Arumugam Dhamodharan, Sudharsanam Abinandan, Unnithan Aravind, Ganapathy Pattukandan Ganapathy, Subramaniam Shanthakumar. “Distribution of Metal Contamination and Risk Indices Assessment of Surface Sediments from Cooum River, Chennai, India”, “International Journal of Environmental Research”, 2019, Vol. 13, Pg. No. 853-860

53.Balarama Krishna CH Jagadeesh P. “Strength and durability assessment of binary blended concrete self compacting concrete replacing partial sand with electronic plastic waste”, “International Journal of Innovative Technology and Exploring Engineering”, 2019, Vol. 8, Pg. No. 107-111

54.Anjali R, Shanthakumar S. “Insights on the current status of occurrence and removal of antibiotics in wastewater by advanced oxidation processes”, “Journal of Environmental Management”, 2019, Vol. 246, Pg. No. 51-62

55.Abdurra’uf M Gora, Jayaprakash Jaganathan, M P Anwar H Y Leung. “Experimental studies and theoretical models for concrete columns confined with FRP composites: A Review”, “World Journal of Engineering”, 2019, Vol. 16, Pg. No. 509-525

56.Rama Mohan Rao Pannem, Karthik Chintalapudi. “Evaluation of Strength Properties and Crack Mitigation of Self-healing Concrete”, “Jordan Journal of Civil Engineering”, 2019, Vol.13 Pg. No. 386-393

57.Shiyamalagowri G, and Ganapathy G P. “Model-Based Clustering Approach for Regional Flood Frequency Analysis”, “Indian Journal of Ecology”, 2019, Vol. 46 Pg. No.493-503

58.Sofi A, Ganesh Naidu Gopu. “Influence of steel fibre, electrical waste copper wire fibre and electrical waste glass fibre on mechanical properties of concrete”, “IOP Conference Series: Materials Science and Engineering”, 2019, Vol. 513 Pg. No. 12-23

59.Danish P, and Mohan Ganesh G. “Effect of waste marble powder as filler material on fresh and hardened properties of self-compacting concrete”, “Journal of Advanced Research in Dynamical and Control Systems”, 2019, Vol. 11 Pg. No. 2254-2260

60.Vinayagamoorthy M, Mohan Ganesh G, and Santhi A S. “Structural Robustness of a Single Span Extra Dosed Bridge over Cable Stayed Bridge”, “Journal of Applied Science and Engineering”, 2019, Vol. 22Pg. No. 413-420

61.Athiyamaan V, and Mohan Ganesh G. “Analysis of the Alignment of Micro-Steel Fibers in Admixture-Based Self-Compacting Concrete (MSFR-SCC) using NDT and Evaluation of Its Effect on the Modulus of Rupture”, “International Journal of Technology”, 2019, Vol. 10 Pg. No. 5-15

62.Devarangdi Manikanta, Uma Shankar M. “Use of ground granulated blast furnace slag blended with bentonite and cement mixtures as a liner in a landfill to retain diesel oil contaminants”, “Journal of Environmental Chemical Engineering”, 2019, Vol. 7 Pg. No. 1-13

63.Umamaheswari J, Shanthakumar S. “Phycoremediation of paddy-soaked wastewater by indigenous microalgae in open and closed culture system”, “Journal of Environmental Management”, 2019, Vol. 243 Pg. No. 435-443

64.Narender Reddy A, Meena T. “A Study on influence of Nano Silica on Mechanical Properties of Blended Concrete”, “Journal of Computational and Theoretical Nanoscience”, 2019, Vol. 16 Pg. No. 2006-2011

65.Shanmuga Priya T, Srinivasan K and Prabhath K J. “Aerobic composting: studies on variation in Parameters by Thumboormuzhi model”, “Eco. Env. & Cons”, 2019, Vol. 25 Pg. No. 379-384

66.Rahul Verma K G, Jagadeesh P. “Mechanical properties of sustainable concrete incorporating manufactured sand and rice husk ash”, “International Journal of Engineering and Advanced Technology”, 2019, Vol. 8 Pg. No. 90-94

67.Anu Mary Ealias, Manickam Puratchiveeran Saravanakumar. “Application of protein-functionalised aluminium nanosheets synthesised from sewage sludge for dye removal in a fixed-bed column: Investigation on design parameters and kinetic models”, “Environmental Science and Pollution Research”, 2019, Vol. 306 Pg. No. 1-22

68.Rijo Rajumon, Jeswin Cyril Anand, Anu Mary Ealias, Devika Satish Desai, Giphin George, Saravanakumar M P. “Adsorption of textile dyes with ultrasonic assistance using green reduced graphene oxide: An in-depth investigation on sonochemical factors”, “Journal of Environmental Chemical Engineering”, 2019, Vol. 7 Pg. No. 103479-103493

69.Visuvasam J, and Chandrasekaran S S. “Effect of soil–pile–structure interaction on seismic behaviour of RC building frames”, “Innovative Infrastructre Solutions”, 2019, Vol. 4 Pg. No.1-19

70.Senthilkumar V and Chandrasekaran S S. “Failure mechanism of long run out landslide triggered by heavy rainfall in Achanakkal, Nilgiris, India”, “Journal of Geotechnical and Geoenvironmental Engineering”, 2019, Vol. 145 Pg. No.1040190471-0401904714

71.Manikanta Devarangadi, Uma Shankar Masilamani. “Use of Sawdust Blended with Bentonite and Cement Mixtures to Retain Diesel Oil Contaminants as a Liner in a Landfill”, “Indian Geotechnical Journal”, 2019, Vol. 3 Pg. No.1-20

72.Vali K S, Murugan B. “Impact of nano SiO2 on the properties of cold-bonded artificial aggregates with various binders”, “International Journal of Technology”, 2019, Vol. 10 Pg. No. 897-907

73.Shanmuga Priya T, Ramesh N, Ankit Agarwal , Shreya Bhusnur , Kamal Chaudhary. “Strength and durability characteristics of concrete made by micronized biomass silica and Bacteria-Bacillus sphaericus”, “Construction and Building Materials”, 2019, Vol. 226 Pg. No. 827-838

74.Simha P, Ramanathan A, Thawani B, Jain P, Hussain S, Ganesapillai M. “Coal fly ash for the recovery of nitrogenous compounds from wastewater: Parametric considerations and system design”, “Arabian Journal of Chemistry”, 2019.

75.Guha S, Barik D K, Mandla V Ravibabu. “Landscape Changes and Sustainable Development Policy in a Developing Area: A Case Study in Chirrakunta Rurban Cluster”, “Lecture Notes in Civil Engineering”, 2019, Vol. 21 Pg. No. 68-77

76.Svalova V B, Zaalishvili G P, Ganapathy A V, Nikolaev D A, Melkov. “Landslide Risk in Mountain Areas”, “Geology and Geophysics of South of Russia”, 2019, Vol. 9 Pg. No. 109-126

77.Shiyamalagowri G, and Ganapathy G P. “Evaluation of regional flood quantiles at ungauged sites by employing nonlinearity-based clustering approaches”, “Environmental Science and Pollution Research”, 2019, Vol. 26 Pg. No. 22856-22877

78.Prasanna Venkatesan Ramani and Laxmana Kumara Lingan KSD. “Application of lean in construction using value stream mapping”, “Engineering, Construction and Architectural Management”, 2019.

79.Prasanna Venkatesan Ramani and Laxmana Kumara Lingan. “Developing a lean model to reduce the design process cost of gas insulated switchgear foundation using value stream mapping – a case study”, “International Journal of Construction Management”, 2019

80.Rama Mohan Rao Pannem, Padmaja P Kumar. “Comparative study of Self-compacting concrete containing lightweight and normal Aggregat”, “Slovak Journal of Civil Engineering”, 2019, Vol. 27 Pg. No.1-8

81.Anita Jessie J, Santhi A S. “Flexural behaviour of steel fibre reinforced concrete at elevated temperatures using abaqus”, “Romanian Journal of Materials”, 2019, Vol. 49 Pg. No. 409-415

82.Govind Singh, AnkitKumar, Samyak Jain, ShanmugaPriya T. “Importance of Labour Efficiency in Dry Dock Construction”, “International Journal of Recent Technology and Engineering”, 2019, Vol. 8 Pg. No. 5737-5741

83.Varun Teja K, Meena T. “Experimental Exploration of Perlite Concrete under Elevated Temperatures”, “Indian Concrete Journal”, 2019, Vol. 93 Pg. No. 27-33

84.Rama Mohan Rao Pannem. “of Polypropylene fibres in mechanical properties of fly ash concrete”, “Journal of polymer &composites”, 2019, Vol. 7 Pg. No. 54-64

85.Varun Teja K, Meena T. “An insight into temperature characteristics of ternary blended concrete with perlite powder”, “Asian Journal of Civil Engineering”, 2019, Vol. 21 Pg. No. 41-48

2018

1. Chokkavarapu N, Kumar P K, Mandla V R. “Estimation of land use land cover change relationship with Normalized Difference Vegetation Index (NDVI) different method and Land Surface Temperature (LST)”, Indian Journal of Ecology, 2018, Vol. 45 (1), Pg. No. 178-182
2. Balagopal Venugopal & Viswanathan Sambamurthy “Development and Performance Evaluation of Coir Pith Ash as Supplementary Cementitious Material in Concrete”, Journal of engineering technology and science, 2018, Vol. 50 (06), Pg. No. 856-869
3. Vigneshkumar M, Yarrakula K. “Titanium metal identification in southern region of Tamil Nadu using hyperspectral imagery”, Indian Journal of Geo-Marine Sciences, 2018, Vol. 47 (10), Pg. No. 2100-2105
4. Suresh D, Yarrakula K. “Subsidence monitoring techniques in coal mining: Indian scenario”, Indian Journal of Geo-Marine Sciences, 2018, Vol. 47 (10), Pg. No. 1918-1933
5. Khanna P, Mukulam A M, Teja K V, Meena T. “Study on durability properties of perlite incorporated concrete”, International Journal of Civil Engineering and Technology, 2018, Vol. 9 (10), Pg. No. 1545-1553
6. Saravanan S S, Jagadeesh P. “Strength and durability studies on concrete made with manufactured sand”, ARPN Journal of Engineering and Applied Sciences, 2018, Vol. 13 (16), Pg. No. 4572-4580
7. Suganya O M, Khan N S, Arshad S M. “Public awareness on government policies and funds for “smart city”projects– A case study at Vellore”, International Journal of Civil Engineering and Technology, 2018, Vol. 9 (13), Pg. No. 1385-1393
8. Sai T J, Neeraja D. “Optimal processing parameters of class f-fly ash geopolymer mortar produced with slightly acidic water by taguchi method”, Journal of Advanced Research in Dynamical and Control Systems, 2018, Vol. 10 (12), Pg. No. 1495-1508
9. Suresh D, Collins Johnny J, Jayaprasad B K, Yarrakula K, Vaishnavi B, Bobba G. “Morphometric analysis for identification of groundwater recharge zones: A case study of Neyyar river basin”, Indian Journal of Geo-Marine Sciences, 2018, Vol. 47 (10), Pg. No. 1969-1979
10. Vaani N, Anand A. “Land use / landcover mapping and sustainability analysis of Chennai city, Tamilnadu, India”, International Journal of Civil Engineering and Technology, 2018, Vol. 9 (13), Pg. No. 1201-1210
11. Suresh D, Yarrakula K. “InSAR based deformation mapping of earthquake using Sentinel 1A imagery”, Geocarto Imnternational, 2018.
12. Suresh D, Yarrakula K. “GIS based multi-criteria decision making system for assessment of landslide hazard zones: Case study in the Nilgiris, India”, Indian Journal of Ecology, 2018, Vol. 45 (2), Pg. No. 286-291
13. Krishna C H B R, Jagadeesh P. “Fresh and hardened properties of self-compacting concrete replacing fine aggregate with high impact polystyrene plastic granules”, International Journal of Civil Engineering and Technology, 2018, Vol. 9 (12), Pg. No. 831-838
14. Shanmugam Karthik, Ram Mohan Rao, Paul Awoyera, Isaac Akinwumi, Tani Karthikeyan, Appukutty Revathi, JothiBharathi Mathivanan, Velumani Manikandan, Subramaniyan Saravanan “Beneficated pozzolanas cement replacement in bamboo- reinforced concrete: the intrinsic characteristics”, Journal of Innovative Infrastructure solutions, 2018, Vol. 3 (3), Pg. No. 1-8
15. Shelar A, Neeraja D, Mahindrakar A B. “Experiential investigation of nitric acid concentration on the compressive strength of ready mix concrete plant waste concrete aggregate (R.M.C.A.C)”, International Journal of Civil Engineering and Technology, 2018, Vol. 9 (8), Pg. No. 1353-1364
16. Athiyamaan V, Mohan Ganesh G. “Optimization of SCC mix design using nan-su theory embodying DOE method”, Indian Concrete Journal, 2018, Vol. 92 (1), Pg. No. 31-41
17. Shanmuga Priya T, Thirumalini S. “Evaluation of Strength and Durability of Natural Fibre Reinforced High Strength Concrete with M-Sand”, Romanian Journal of Materials, 2018, Vol. 48 (4), Pg. No. 1-8
18. Khalid Ahmed Gour, Ravi Ramadoss, Thirumalini Selvaraj “Revamping the traditional air lime mortar using the natural polymer – Areca nut for restoration application”, Construction and Building Materials, 2018, Vol. 164 (164), Pg. No. 255-264
19. Vani V, Kumar P K, Mandla V R. “Agriculture drought analysis using remote sensing based on NDVI-LST feature space”, Indian Journal of Ecology, 2018, Vol. 45 (1), Pg. No. 6-10
20. Ravi Ramadoss and Thirumalini Selvaraj. “Effect of natural polymers from cissus glauca roxb on the mechanical and durability properties of hydraulic lime mortar”, International Journal of Architectural Heritage, 2018, Vol. 13 (2), Pg. No. 229-243
21. Thirumalini Selvaraj, Ravi Ramadoss. “Analysis and Characterisation of the Third Century Ancient Mortars at Subramanya Swamy Temple rediscovered after the 2004 Tsunami near Mamallapuram Shore, India”, International Journal of Conservation Science, 2018, Vol. 9 (1), Pg. No. 25-38
22. Ravi R, Thirumalini S, Taher N “Analysis of Ancient lime Plasters - Reason behind The longevity of the Monument Charminar, India A Study”, Journal of Building Engineering, 2018, Vol. 20 (20), Pg. No. 30-41
23. Vijayaraghavan G, Shanthakumar S. “Effective removal of reactive magenta dye in textile effluent by coagulation using algal alginate”, Desalination and Water Treatment, 2018, Vol. 121, Pg. No. 14-21
24. NagamalleswaraRao k, Babu Ponnusami A. “Simulation Studies on Natural gas sweetening using Piperazine Amine”, Petroleum and Coal, 2018, Vol. 60 (4), Pg. No. 632-640
25. Banerjee D, Jagadeesh P, Rao R P. “A system dynamic approach of technical risk modelling in transportation megaprojects”, International Journal of Civil Engineering and Technology, 2018, Vol. 9 (8), Pg. No. 627-635
26. Supratim Guha, Mandla V R, Dillip K Barik, Pritam Das, V M Rao., Teya Pal, P K Rao “Analysis of sustainable livelihood security: a case study of Allapur s rurban cluster”, Journal of Rural Development, 2018, Vol. 37 (2), Pg. No. 365-382
27. Manojkumar N, Srimuruganandam B, Nagendra SMS. “Quantification of Size Segregated Particulate Matter Deposition in Human Airways”, Journal of Advanced Research in Alternative Energy, Environment Ecology, 2018, Vol. 5 (4), Pg. No. 15-22
28. Kumar R R, Jagadeesh P, Rao P R M. “Mechanical properties of control and fly ash blended concrete using coal washery rejects as partial replacement of coarse aggregate”, International Journal of Civil Engineering and Technology, 2018, Vol. 9 (2), Pg. No. 235-246
29. Shelar A, Neeraja D, Mahindrakar A B. “Experimental investigation of crushed sand in strength supporting self- actualization of concrete”, International Journal of Civil Engineering and Technology, 2018, Vol. 9 (9), Pg. No. 1504-1513
30. Venkata Giri Raj Kumar Konda, Venkatesh Reddy Chejarla, Venkata Ravibabu Mandla, Vani Voleti, Nagaveni Chokkavarapu. “Vegetation damage assessment due to Hudhud cyclone based on NDVI using Landsat-8 satellite imagery”, Arabian Journal of Geosciences, 2018, Vol. 11 (35), Pg. No. 1-2
31. Debalina Banerjee, Jagadeesh P and Ramamohan Rao. “A System Dynamic Approach of Technical Risk Modelling in Transportation Megaprojects”, International Journal of Civil Engineering and Technology, 2018, Vol. 9 (8), Pg. No. 627-635
32. Mohd Imran, Akhalakur Rahman Ansari, Aabid Hussain Shaik, Abdulaziz, Shahir Hussain, Afzal Khan, Mohammed Rehaan Chandan. “Ferrofluid synthesis using oleic acid coated Fe3O4 nanoparticles dispersed in mineral oil for heat transfer applications”, Materials Research Express, 2018, Vol. 5 (3).
33. Vinod Kumar Kancherla, Venkata Ravibabu Mandla, Colin Arrowsmith. “Study of thermal IR phenomena associated with 27 February 2010 Chile Mw 8.8 earthquake using MODIS data”, Geocarto International, 2018, Vol. 33 (3), Pg. No. 293-309
34. Shady Adel Fahim Rezkalla, Anwar Mohammed Parvez, Jayaprakash Jaganathan, Wael Elleithy, Teck Leong Lau, Kian Lim Yap. “Parametric Study on Seismic Response of RC Structures”, International Journal of Engineering & Technology, 2018, Vol. 7 (3), Pg. No. 90-95
35. Kian Lim Yap, Anwar Mohammed Parvez, Jayaprakash Jaganathan, Wael Elleithy, Teck Leong Lau “Feasibility Study on Replicating Tree Design Structure in Trusses Subjected to Lateral Loading”, International Journal of Engineering & Technology, 2018, Vol. 7 (3.36), Pg. No. 84-89
36. Shanmugapriya T, Uma R N and Murali K. “Multivariate adaptive regression splines model to predict strength characteristics of high-performance concrete”, Journal of Structural Engineering, 2018, Vol. 45 (03), Pg. No. 1-10
37. Sowmya Vilvanathan, Shanthakumar S. “Ni2+ and Co2+ adsorption using Tectona grandis biochar: kinetics, equilibrium and desorption studies”, Environmental Technology, 2018, Vol. 39 (4), Pg. No. 464-478
38. Reddy G K, Yarrakula K. “Assessment of contamination levels and ecological risk indices of environmentally hazardous metals for granite mining waste”, Indian Journal of Ecology, 2018, Vol. 45 (1), Pg. No. 227-234
39. Suganya OM, Himasaikiranreddy D, Srinidhi S V. “Case study on environmental impacts by cement industry and minimization using alternate cementitious materials”, International Journal of Civil Engineering and Technology, 2018, Vol. 9 (13), Pg. No. 910-917
40. Ganapathy G P, Zaalishvili V B, Mel’kov D A, Dzeranov B V, Chandrasekaran S S. “Mapping of Soil Liquefaction Potential Susceptibility for Urban Areas, Geology and Geophysics of South of Russia”, Geology and Geophysics of South of Russia, 2018, Vol. 3, Pg. No. 106-115
41. Ganapathy G P, Zaalishvili V B, Mel’kov D A, Svalova V B, Nikolaev A V “GIS Approach Geospatial Application for Seismic Microzonation”, Geology and Geophysics of South of Russia, 2018, Vol. 3, Pg. No. 116-136
42. George A, Sofi A. “Torsional and cracking behaviours of normal weight and coconut shell lightweight concretes”, Journal of Engineering Science and Technology, 2018, Vol. 13 (12), Pg. No. 4104-4117
43. Chukki J, Abinandan S, Shanthakumar S. “Chrysanthemum indicum microparticles on removal of hazardous Congo red dye using response surface methodology”, International Journal of Industrial Chemistry, 2018, Vol. 9 (4), Pg. No. 305-316
44. Parimalarenganayaki S, and Elango L. “Quantification of groundwater recharge and river bed clogging by daily water level measurements in a check dam”, Arabian Journal of Geosciences, 11(8), 174., 2018, Vol. 11 (8), Pg. No. 174-182
45. Khanna P, Mukulam A M, Punitha Kumar A. “A review on axial capacity of steel tubular compression member”, International Journal of Civil Engineering and Technology, 2018, Vol. 9 (10), Pg. No. 569-572
46. Vijayaraghavan G, Shanthakumar S. “Effective Removal of Acid Black 1 Dye in Textile Effluent Using Alginate from Brown Algae as a Coagulant”, Iranian Journal of Chemistry and Chemical Engineering, 2018, Vol. 37 (4), Pg. No. 145-151
47. Nagaveni Ch, Pavan Kumar K. “Land use land change impact on hydrology of the forest watershed, India”, Journal of Rural Development, 2018, Vol. 37 (2), Pg. No. 179-194
48. Deepna U, Arjun S Menon, Balamurugan S. “A Comparative Study on Shear Wall Concept in Accordance to its Seismic Behavior”, International Journal of Engineering and Technology, 2018, Vol. 7 (4), Pg. No. 182-187
49. NagamalleswaraRao K. “Aspen HYSYS simulation of Suspension (Slurry) process for the production of Polyethylene”, Journal of polymer and Composites, 2018, Vol. 6 (3), Pg. No. 1-5
50. Vani V and Pavan Kumar K. “Crop condition assessment of groundnut using time series NDVI data in Anantapur District, Andhra Pradesh”, Journal of Rural Development, 2018, Vol. 37 (2), Pg. No. 167-178
51. Karthik S. Rama Mohanrao P. “Comparative Study of Flexural Member with Steel Reinforcement and Partial Bamboo Reinforcement”, Journal of Adv Research in Dynamical and Control Systems, 2018, Vol. 10 (12s), Pg. No. 1655-1662
52. Shelar A, Neeraja D, Mahindrakar A B. “Experimental investigation of strength of concrete by using concrete and concrete related product plants waste water use in concrete”, International Journal of Civil Engineering and Technology, 2018, Vol. 9 (9), Pg. No. 1302-1308
53. RK KVG., DK Barik “Assessment of Carbon Storage and Erosion using Invest Model in Visakhapatnam District, Andhra Pradesh”, Journal of Rural Development, 2018, Vol. 37 (2).
54. Rama Mohan Rao P, Karthik S. “Investigation on Flexural Behaviour of Beam with Bamboo as Main Rebars”, International Journal of Recent Technology and Engineering, 2018, Vol. 7 (4S7), Pg. No. 173-177
55. Subbu Lakshmi E, kiran yarrakula. “Review and critical analysis on digital elevation models”, Geofizika, 2018, Vol. 35, Pg. No. 1-40
56. Pijush Samui, Dookie Kim, JaganSanjiban J, Sekhar Roy. “Determination of Uplift Capacity of Suction Caisson Using Gaussian Process Regression, Minimax Probability Machine Regression and Extreme Learning Machine”, Iranian Journal of Science and Technology, Transactions of Civil Engineering, 2018, Pg. No. 1-7
57. Bala Rama Krishna C H, Jagadeesh P. “Compressive strength evaluation of eco-friendly concrete replacing sand partially with high impact polystyrene”, International Journal of Civil Engineering and Technology, 2018, Vol. 9 (1), Pg. No. 865-870
58. Svalova V B, Zaalishvili V B, Ganapathy G P, Nikolaev A V. “Natural Hazards and Disasters in Mountain Areas”, Geology and Geophysics of South of Russia, 2018, Vol. 2, Pg. No. 99-115
59. Pramod Kumar M V, Visuvasam J, Srinivasan K, Jayasingh S. “Study on axial stress-strain relation and poissons ratio effect on coconut shell concrete”, International Journal of Civil Engineering and Technology, 2018, Vol. 9 (4), Pg. No. 365-371
60. Malathy J “Status of soil and water in Thuthipet, Ambur, Tamil Nadu, India”, IEEE, 2018, Vol. 58 (1), Pg. No. 15-18
61. Teja K V, Meena T. “Study on temperature resistance concrete”, International Journal of Civil Engineering and Technology, 2018, Vol. 9 (4), Pg. No. 1229-1236
62. Venkata Rambabu V, Mahindrakar A B. “Aggressive effects of marine environment on reinforced cement concrete”, Journal of Advanced Research in Dynamical and Control Systems, 2018, Vol. 10 (10), Pg. No. 359-365
63. Rahul Roy, Ananda Mitra, Ajay T Gaesh, Sairam V. “Effect of Graphene Oxide Nanosheets dispersion in cement mortar composites incorporating Metakaolin and Silica Fume”, Construction and Building Materials, 2018, Vol. 186, Pg. No. 514-524
64. Reddy A N, Meena T. “Study on effect of colloidal Nano silica blended concrete under compression”, International Journal of Engineering and Technology(UAE), 2018, Vol. 7 (1), Pg. No. 210-213
65. Vigneshwaran S and Vasantha Kumar S. “Extraction of Built-Up Area using High Resolution Sentinel-2A and Google Satellite Imagery”, The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences (ISPRS Archives), 2018, Pg. No. 165-169
66. Vasantha Kumar S, Priyadharshini P, Dhanalakshmi B and Settu K. “Study of Traffic Flow at a Three Legged Busy Intersection in Vellore, India”, IOP Conf. Series: Materials Science and Engineering, 2018, Vol. 396 (1), Pg. No. 1-8
67. Omkar G and Vasantha Kumar S. “Finite Difference Formulation of Lighthill Whitham Richards (LWR) Macroscopic Model for Traffic Flow Prediction”, International Journal of Applied Mathematics, 2018, Vol. 31 (5), Pg. No. 603-610
68. Shelar A, Neeraja D, Mahindrakar A B. “Experimental study of superplasticizer on fresh and hardened properties of concrete using crushed sand”, International Journal of Civil Engineering and Technology, 2018, Vol. 9 (8), Pg. No. 1407-1413
69. Sofi A, Satish B M. “Studies on properties of internal sealing of self-compacting concrete using polyethylene glycol”, Indian Concrete Journal, 2018, Vol. 92 (1), Pg. No. 64-76
70. Venkatesh B, Mahindrakar A B. “Enhancing the prediction of the streamflow for SWAT models”, International Journal of Engineering and Technology(UAE), 2018, Vol. 7 (4), Pg. No. 4617-4623
71. Giphin George, Saravanakumar M P. “Facile synthesis of carbon-coated layered double hydroxide and its comparative characterisation with Zn-Al LDH: Application on Crystal Violet and Malachite Green dye adsorption-isotherm, kinetics and Box Behnken design”, Environmental Science and Pollution Research, 2018, Vol. 25 (30), Pg. No. 30236-30254
72. Murali K, Meena T, Srikrishna C T, Sai P P. “An experimental study on factors influencing the compressive strength of geopolymer mortar”, International Journal of Civil Engineering and Technology, 2018, Vol. 9 (1), Pg. No. 608-616
73. Venkata Giri Raj Kumar Konda, Venkatesh Reddy Chejarla, Venkata Ravibabu Mandla, Vani Voleti, Nagaveni Chokkavarapu. “Vegetation damage assessment due to Hudhud cyclone based on NDVI using Landsat-8 satellite imagery”, Arabian Journal of Geosciences, 2018, Vol. 11 (3), Pg. No. 1-2
74. Sai P P, Meena T. “A review of ternary blended hybrid fibre reinforced concrete”, International Journal of Civil Engineering and Technology, 2018, Vol. 9 (1), Pg. No. 314-319
75. Reddy A N, Meena T, Teja K V. “Experimental Investigation on Blended Concrete with Alccofine”, International Journal of Engineering Technology Science and Research, 2018, Vol. 5 (1), Pg. No. 1258-1264
76. Varun Teja K, Meena T, Narender Reddy A. “Investigation on Metakaolin and Silicafume Incorporated Concrete under Elevated Temperature”, International Journal of Computer and Mathematical Sciences, 2018, Vol. 7 (1), Pg. No. 1-7
77. Murugavelh S, Mohanty K. “Performance of Halomonas sp. to reduce hexavalent chromium in batch and continuous fixed film reactor”, Journal of Environmental Chemical Engineering, 2018, Vol. 6 (2), Pg. No. 2561-2567
78. Koteswara Reddy G, Kiran Yarrakula, Raju C S K, Alireza Rahbari. “Mixed convection analysis of variable heat source/sink on MHD Maxwell, Jeffrey, and Oldroyd-B nanofluids over a cone with convective conditions using Buongiorno's model”, Journal of Thermal Analysis and Calorimetry, 2018, Vol. 132 (3), Pg. No. 1995-2002
79. Nagaveni Ch, Pavan Kumar K, Venkata Ravi Babu Mandla. “Estimation of land use land cover change relationship with NDVI different method and land surface temperature”, Indian Journal of Ecology, 2018, Vol. 45 (1), Pg. No. 178-182
80. Ria Abraham, Sarah Mathew, Susanna Kurian, Saravanakumar M P, Anu Mary Ealias, Giphin George. “Facile synthesis, growth process, characterisation of a nano urchin-structured alpha MnO2 and their application on ultrasonic assisted adsorptive removal of cationic dyes: A half-life and half capacity concentration approach”, Ultrasonics Sonochemistry, 2018, Vol. 49 (1), Pg. No. 175-189
81. Anu Mary Ealias, Saravanakumar M P. “Facile Synthesis and characterization of AlNs using protein-rich solution extracted from sewage sludge and its application for ultrasonic assisted dye adsorption: Isotherms, kinetics, Mechanism and RSM design”, Journal of Environmental Management, 2018, Vol. 206 (1), Pg. No. 215-227
82. Pijush Samui, Dookie Kim, Namrata Kakoti. “Soft Computing Applied to Rotation Capacity of Wide Flange Beams”, Iranian Journal of Science and Technology Transactions of Electrical Engineering, 2018, Vol. 42 (3), Pg. No. 305-314
83. Sairam V, Nikhil Kumar, Mohit Kumar and Tadap Techi. “A study on strength & Durability of Cement, silica fume & Nano silica paste”, International Journal of Scientific Research and Review, 2018, Vol. 7 (5), Pg. No. 271-274
84. Yadali P, Selvaraj R, Neeraja D. “Alternate binders for construction, repair and rehabilitation”, International Journal of Civil Engineering and Technology, 2018, Vol. 9 (4), Pg. No. 1220-1228
85. Malathy J, Ganesh Kumar S, Pranav Satish, Arunachalam S. “Experimental Investigation in Developing a Ternary Blended Cementitious Binder produced from Waste Materials for Pavements on Soft Soils”, International Journal of Civil Engineering and Technology (IJCIET), 2018, Vol. 9 (5), Pg. No. 0-10
86. Priya M P, Santhi A S. “Experimental study on the behavior of flat slab under different support conditions”, International Journal of Pure and Applied Mathematics, 2018, Vol. 119 (12), Pg. No. 465-471
87. Ghosh J, Porchelvan P. “Relationship between surface temperature and land cover types using thermal infrared band and NDVI for Vellore District, Tamilnadu, India”, Nature Environment and Pollution Technology, 2018, Vol. 17 (2), Pg. No. 611-617
88. Vasantha Kumar S and Sivanandan R. “Traffic Congestion Quantification for Urban Heterogeneous Traffic Using Public Transit Buses as Probes”, Periodica Polytechnica Transportation Engineering, 2019, Vol. 47 (4), Pg. No. 257-267
89. Janani S, Santhi A S. “Multiple linear regression model for mechanical properties and impact resistance of concrete with fly ash and hooked-end steel fibers”, International Journal of Technology, 2018, Vol. 9 (3), Pg. No. 526-536
90. Gurudev S, Shanthakumar S. “Removal of organic pollutants from coffee wastewater: A mini-review”, Indian Journal of Environmental Protection, 2018, Vol. 38 (3), Pg. No. 213-220
91. Vishwas S K, Anil P M, Murugavelh S. “Biodiesel production and characterisation from Punnai oil using egg shell catalyst: Engine performance and emission studies”, International Journal of Environment and Sustainable Development, 2018, Vol. 17 (43134), Pg. No. 124-137
92. Sanjay S P, Arvind B A, Murugavelh S. “Biodiesel production and characterisation from Pongamia oil using low cost Pisthia shell catalyst: Engine performance and emission studies”, International Journal of Environment and Sustainable Development, 2018, Vol. 17 (43134), Pg. No. 138-150
93. Akul Nair M, Sofi A, Kannan V. “Extension of existing platform of Kochi Metro to accommodate more train-cars”, International Journal of Engineering and Technology (UAE), 2018, Vol. 7 (3), Pg. No. 59-63
94. Sureshkumar R, Visuvasam J, Simon J. “Seismic behaviour of high rise RC structures”, Disaster Advances, 2018, Vol. 11 (6), Pg. No. 15-22
95. Vani V, Pavan Kumar K, Venkata Ravi Babu Mandla. “Agricultural drought analysis using remote sensing based on NDVI-LST feature space”, Indian Journal of Ecology, 2018, Vol. 45 (1), Pg. No. 5-10
96. Naga Sai T, Kamatchi P, Santhi A S. “Seismic performance of asymmetrical building with VE dampers”, International Journal of Pure and Applied Mathematics, 2018, Vol. 119 (12), Pg. No. 445-450
97. Dabral K, Selvaraj R, Simon J. “Critical test methods to evaluate underwater concrete”, International Journal of Pure and Applied Mathematics, 2018, Vol. 119 (12), Pg. No. 455-461
98. Narender Reddy A, Meena T. “A Study on Compressive Behavior of Ternary Blended Concrete Incorporating Alccofine”, Materials Today: Proceedings, 2018, Vol. 5 (5), Pg. No. 11356-11363
99. Tenepalli J S, Neeraja D. “Properties of class F fly ash based geopolymer mortar produced with alkaline water”, Journal of Building Engineering, 2018, Vol. 19, Pg. No. 42-48
100. Pushpangadan S, Menon A S, Sofi A. “Parametric study of stiffeners in steel composite tub girders”, International Journal of Engineering and Technology(UAE), 2018, Vol. 7 (3), Pg. No. 64-67
101. Senthilkumar V, Chandrasekaran S S, Maji V B. “Rainfall-induced landslides: Case study of the Marappalam landslide, Nilgiris district, Tamil Nadu, India”, International Journal of Geomechanics, 2018, Vol. 18 (9).
102. Rane K, Jayasingh S, Visuvasam J, Sangtiani S. “Structural evaluation of bow string and network arch bridge with different design parameters and bracings”, International Journal of Civil Engineering and Technology, 2018, Vol. 9 (3), Pg. No. 671-682
103. Dutta S, Samui P, Kim D. “Comparison of machine learning techniques to predict compressive strength of concrete”, Computers and Concrete, 2018, Vol. 21 (4), Pg. No. 463-470
104. Shanmuga Priya T, Thirumalini S. “Evaluation of Strength and Durability of Natural Fibre Reinforced High Strength Concrete with M-Sand”, Romanian Journal of Materials, 2018, Vol. 48 (4), Pg. No. 483-490
105. Priyanka M, Saravanakumar M P. “Ultrahigh adsorption capacity of starch derived zinc based carbon foam for adsorption of toxic dyes and its preliminary investigation on oil-water separation”, Journal of Cleaner Production, 2018, Vol. 197 (1), Pg. No. 511-524
106. Chokkavarapu N, Kummamuru P K, Mandla V R. “Runoff estimation by using optimized hydrological parameters with special reference to semi-arid agriculture watershed”, Springer Series in Geomechanics and Geoengineering, 2018, Pg. No. 291-308.
107. Singh D, Sowmya V, Abinandan S, Shanthakumar S. “Removal of Malachite Green Dye by Mangifera indica Seed Kernel Powder”, Journal of The Institution of Engineers (India): Series A, 2018, Vol. 99 (1), Pg. No. 103-111
108. Rashid Z, Wilfred C.D, Gnanasundaram N, Arunagiri A, Murugesan T. Screening of ionic liquids as green oilfield solvents for the potential removal of asphaltene from simulated oil: COSMO-RS model approach Journal of Molecular Liquids, 2018, Vol. 255, Pg. No. 492-503
109. Vinayaka A.S, Mahanty B, Rene E.R, Behera S.K. Biodiesel production by transesterification of a mixture of pongamia and neem oils. Biofuels, 2018, Vol 1, Pg.No. 9
110. M. Muthukumar & Sanjay Kumar Shukla. Swelling behaviour of expansive clay beds reinforced with encased granular pile anchors, International Journal of Geotechnical Engineering, 2018, Vol.12, Pg.No 109-117
111. Selvaraj Thirumalini, RamadossRavi, MuruganRajesh. Experimental investigation on physical and mechanical properties of lime mortar: Effect of organic addition. Journal of Cultural Heritage , 2018, Vol.31, Pg.No 97-104
112.Rao, K.N., Ponnusami, A.B.“Design of high pressure vessels using Aspen HYSYS blowdown analysis”, International Journal of Environment and Waste Management, 2018 Vol.22,Pg.No. 272-281
113.Kit Wayne Chew., Jing Ying Yap., SitiSabariah Din., Tau Chuan Ling., PurushothamanMonash., Pau Loke.” Show Developments in Fermentative Butanol Production as an Alternative Biofuel Source”, Journal of Energy Resources Technology, 2018 Vol. 40
114.Rehman, A.U., Baek, J.W., Rene, E.R., Sergienko, N., Behera, S.K., Park H.-S.“Effect of process parameters influencing the chemical modification of activated carbon fiber for carbon dioxide removal”, Process Safety and Environmental Protection, 2018 Vol. 118,Pg.No 384
115.Simha, P., Lalander, C., Ramanathan, A., Vijayalakshmi, C., McConville, J.R., Vinnerås, B., Ganesapillai, M. “What do consumers think about recycling human urine as fertiliser? Perceptions and attitudes of a university community in South India, Water Research, 2018 Vol. 143,Pg.No. 527
116.Rashid, T., Gnanasundaram, N., Appusamy, A., Kait, C.F., Thanabalan, M.“Enhanced lignin extraction from different species of oil palm biomass: Kinetics and optimization of extraction conditions”, Industrial Crops and Products”, 2018 Vol. 116,Pg.No. 122
117.Imran, M., Shaik, A.H., Ansari, A.R., Aziz, A., Hussain, S., FadilAbouatiaa, A.F., Khan, A., Chandan. M.R. “Synthesis of highly stable γ-Fe2O3 ferrofluid dispersed in liquid paraffin, motor oil and sunflower oil for heat transfer applications”, RSC Advances, 2018 Vol.8
118.Shaik, A.H., Chandan, M.R.“Preparation of stable copper nanostructures and their direct phase transfer using mercaptosuccinic acid” Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2018 Vol.550,Pg.No. 46
119.Simha, P., Zabaniotou, A., Ganesapillai, M. “Continuous urea-nitrogen recycling from human urine: A step towards creating a human excreta based bio-economy”, Journal of Cleaner Production, 2018 Vol.172
120.Mohd Imran., AkhalakurRahman Ansari., AabidHussainShaik., Abdulaziz., shahirHussain., MR Chandan., Afzal khan.”Ferrofluid synthesis using oleic acid coated Fe3O4 nanoparticles dispersed in mineral oil for heat transfer applications”, Materials Research Express, 2018 Vol.5 
121.Muruganandam, L., Kunal, D., Melwyn, G.O.“Studies on droplet size distribution of oil-in-water emulsion in SMX static mixer”, Journal of Applied Fluid Mechanics, 2018 Vol. 11,Pg.No. 107-114
122.Patidar, K., Roy, R., Kumar, S., Nirmala, G., Murugesan, T.“Experimental investigation of sterculiafoetida and moringaoleifera as a coagulant for water and wastewater treatment”, Desalination and Water Treatment, 2018 Vol. 122,Pg.No. 254-259
123.Javed, M., Shaik, A.H., Khan, T.A., Imran, M., Aziz, A., Ansari, A.R., Chandan,M.R.”Synthesis of stable waste palm oil based CuOnanofluid for heat transfer applications”, Heat and Mass Transfer/Waerme- und Stoffuebertragung, 2018 Vol. 54
124.Pushpangadan, S., Menon, A.S., Sofi, A.“Parametric study of stiffeners in steel composite tub girders”, International Journal of Engineering and Technology (UAE), 2018 Vol.7, Pg.No.59-63
125.DebalinaBanerjee,P.,Jagadeesh, and RamamohanRao.” A System Dynamic Approach of Technical Risk Modelling in Transportation Megaprojects”, International Journal of Civil Engineering and Technology, 2018 Vol.9, Pg.No.627-635

 

2017

1. P. Thomas, N. Soren, N. P. Rumjit, J. George James, and M. P. Saravanakumar, “Biomass resources and potential of anaerobic digestion in Indian scenario,” Renew. Sustain. Energy Rev., vol. 77, pp. 718–730, 2017.

2. T. S. R. Babu and D. Neeraja, “A experimental study of natural admixture effect on conventional concrete and high volume class F flyash blended concrete,” Case Stud. Constr. Mater., vol. 6, pp. 43–62, 2017.

3. A. George and A. Sofi, “Torsional Strengthening of Normal Weight Concrete And Light Weight Concrete,” Mater. Today Proc., vol. 4, no. 9, pp. 9846–9850, 2017.

4. S. George and A. Sofi, “Enhancement of Fly Ash Concrete by Hydrated Lime and Steel Fibres,” Mater. Today Proc., vol. 4, no. 9, pp. 9807–9811, 2017.

5. A. Sofi, “Effect of waste tyre rubber on mechanical and durability properties of concrete – A review,” Ain Shams Eng. J., https: doi.org/10.1016/j.asej.2017.08.007, 2017.

6. S. Karthik, P. R. M. Rao, and P. O. Awoyera, “Strength properties of bamboo and steel reinforced concrete containing manufactured sand and mineral admixtures,” J. King Saud Univ. - Eng. Sci., vol. 29, no. 4, pp. 400–406, 2017.

7. S. Vasantha Kumar, “Traffic Flow Prediction using Kalman Filtering Technique,” Procedia Eng., vol. 187, pp. 582–587, 2017.

8. A. M. Ealias and M. P. Saravanakumar, “Facile synthesis and characterisation of AlNs using Protein Rich Solution extracted from sewage sludge and its application for ultrasonic assisted dye adsorption : Isotherms, kinetics , mechanism and RSM design,” Journal of 
Environmental Management, vol. 206, 215-227, 2018.

9. S. V. Kumar, K. C. Dogiparthi, L. Vanajakshi, and S. C. Subramanian, “Integration of exponential smoothing with state space formulation for bus travel time and arrival time prediction,” Transport, vol. 32, no.358-367, 2017.

10. S. Vilvanathan and S. Shanthakumar, “Modeling of fixed-bed column studies for removal of cobalt ions from aqueous solution using Chrysanthemum indicum,” Res. Chem. Intermed., vol. 43, no. 1, pp. 229–243, 2017.

11. B. R. Phanikumar and M. Uma Shankar, “Heave Studies on Fly Ash-Stabilised Expansive Clay Liners,” Geotech. Geol. Eng., vol. 35, no. 1, pp. 111–120, 2017.

12. Srinivasan  Karunanithi, “Experimental Studies on Punching Shear and Impact Resistance of Steel Fibre Reinforced Slag Based Geopolymer Concrete,” Adv. Civ. Eng., https://doi.org/10.1155/2017/9210968, 2017.

13. S. Vilvanathan and S. Shanthakumar, “Column adsorption studies on Nickel and Cobolt Removal from Aqueous Solution Using Native and Biochar Form of Tectona grandis, Environmental Progress & Sustainable Energy, Vol. 36, No. 4, pp. 1030-1038, 2017.

14. S. Ramya and S. Shanthakumar, “Investigation on potential reuse of textile sludge as fertiliser and for preparation of solid blocks,” Int. J.  Environment and Waste Management,  vol. 19, no. 2, pp. 105-116, 2017.

15. S. Pavithra and S. Shanthakumar, “Removal of COD, BOD and color from municipal solid waste leachate using silica and iron nano particles - a comparative study,” Glob. Nest J., vol. 19, no. 1, pp. 122–130, 2017.

16. N. Francy and S. Shanthakumar, “A review on contaminated soil remediation using Nanoscale zero-valent Iron (nZVI),” Eco. Env. & Cons.,  vol. 23, no. 1, pp. 172–177, 2017.

17. N. Vaani and P. Porchelvan, “Assessment of long term agricultural drought in Tamilnadu , India using NDVI anomaly,” Disaster Advances, vol. 10, no. 10, pp. 1–10, 2017.

18. N. Vaani and P. Porchelvan, “Spatio temporal analysis and modelling of meteorological drought for the state of Tamilnadu, India using Standard Precipitation Index (SPI) and GIS,” Disaster Advances, vol. 10, no. 1, pp. 1–10, 2017.

19. K. Brindha, S. P. Renganayaki, and L. Elango, “Sources, toxicological effects and removal techniques of nitrates in groundwater: An overview,” Indian J. Environ. Prot., vol. 37, no. 8, pp. 667–700, 2017.

20. A. N. B. Nair and A. Sivakumar, “A Study on the Heavy Metal Accumulation in Water , Soil and Vegetable Samples in Industrial Belt of Vellore District,” Pollution Research,  vol. 36, no. 3, pp. 245–250, 2017.

21. R. Mithra , R. Selvaraj and Om Suganya., “Electro-Kinetic Technique for Enhancing Durability of Concrete,” Int. J.  Civil Engg. Tech. , vol. 8, no. 4, pp. 801–808, 2017.

22. R. Vigneshvar, Hareesh. M and Sekar S.K, “Analysis of Tensile Capacity of Reinforced Concrete Columns and Its Ductility Performance Towards Seismic behaviour,” Int. J.  Civil Engg. Tech.,  vol. 8, no. 8, pp. 798–806, 2017.

23. J. Visuvasam, T. Meena, R. Mithra, P. P. Kumar, and S. Babu, “Study of bending behavior of horizontally curved steel beams using ANSYS,” J. Chemical and Pharmaceutical Sciences,  vol. 10, no. 1, pp. 275–279, 2017.

24. R. Chandrasekar, T. Chilabarasan, Roshan, T. S. A, and J. Visuvasam, “Development of high strength concrete using waste foundry sand,” J. Chemical and Pharmaceutical Sciences , vol. 10, no. 1, pp. 348–351, 2017.

25.T. M. A. NarenderReddy, T. Meena,  “Behaviour Ehaviour of Ternary Blended Concrete Under Compression,” Int. J. Civ. Eng. Technol., vol. 8, no. 4, pp. 2089–2097, 2017.

26. A. Garg, A. M. Dar, J. Simon  and J. Visuvasam, “Analysis of Composite Composit E Sandwich Slabs With Patterned Web Reinforcement,” Int. J. Civ. Eng. Technol,. vol. 8, no. 6, pp. 664–674, 2017.

27. M. Bhalme, S.Sangtiami, Simon J and Visuvasam J , “Effect of Rebar Corrosion Corrosion on the Flexural Strength of Rc Beam Using Finite Element Analysis,” Int. J. Civ. Eng. Technol. , vol. 8, no. 4, pp. 193–200, 2017.

28. J. Visuvasam, J.Simon and R.Chandrasekar, “Seismic Vulnerability Assessment of Existing Residential Building at Vellore,” Int. J. Civ. Eng. Technol.,  vol. 8, no. 4, pp. 604–610, 2017.

29. T. D. Tamang, J. Visuvasam, and J. Simon, “Effect of infill stiffness on seismic performance of moment resisting RC structure,” Int. J. Civ. Eng.Technol., vol. 8, no. 3, pp. 1023–1033, 2017.

30. Balamurugan R. Deepan, R, Deepak T and Shiva P, “Durability performance of concrete containing copper slag and fly-ash, J.Chemical and Pharmaceutical Sciences, ” vol. 10, no. 1, pp. 428–431, 2017.

31. T. K. Dange, and Neeraja, “Parametric Study of Portable Ress (Rapid Erection Sun Shelters ) With NCEl”, Int. J. Civ. Eng. Technol vol. 8, no. 4, pp. 121–130, 2017.

32. T. Meena, “An insight into research perspectives of Tensegrity Structures,” J. Chemical and Pharmaceutical Sciences,  vol. 10, no. 1, pp. 473–482, 2017.

33. S. Gnanasoundarya, V. K. Teja, and T. Meena, “Experimental study on ternary blended concrete under elevated temperature,” Int. J. Civ. Eng. Technol., vol. 8, no. 5, pp. 895–903, 2017.

34. Sasidhar T, Neeraja D and VSM Sudhindra, “Application of Genetic Algorithm Technique for Optimizing Design of Reinforced Concrete Retaining Wall,” Int. J. Civ. Eng. Technol.,  vol. 8, no. 5, pp. 999–1007, 2017.

35. R.S.Mali, G.Mohan Ganesh, M. Rajan, “Development of Design Tool for Different Types of Moment and Shear”, Int. J. Civil  Engg. Tech.,  vol. 8, no. 4, pp. 234–243, 2017.

36. B. Patel, R. Mali,  P. Jadhav, and G. M. Ganesh, “Seismic Behavior of Different Bracing Systems in High Rise Rcc Buildings,” Int. J. Civil  Engg. Tech. vol. 8, no. 3, pp. 973–981, 2017.

37. P. M. Hoby, A. S. Santhi, and G. M. Ganesh, “The performance of multi blended cement concrete in marine environment,” Int. J. Civ. Eng. Technol., vol. 8, no. 7, pp. 219–231, 2017.

38. V. Venkata Ram Babu and A. B. Mahindrakar, “Impact of aggressive environment on concrete - A review,” Int. J. Civ. Eng. Technol., vol. 8, no. 9, pp. 777–788, 2017.

39. B. Patel, G.Mohan Ganesh and M. Rajan, “Development of Design Tool for Optimum Design of Structural Steel”,  Int. J. Civ. Eng. Technol.,  vol. 8, no. 4, pp. 210–220, 2017.

40. P.Jadhav, G.Mohan Ganesh and M. Vinayakamurthy “Erection Stage Dynamic Dynam Behavior of Cable Stayed Bridge Using Construction Stage Analysis,” Int. J. Civ. Eng. Technol,  vol. 8, no. 4, pp. 252–264, 2017.

41. Neeraja. D, Swaroop G. “Prediction of compressive strength of concrete using neural networks,” Comput. Concr., vol. 10, no. 2, pp. 197–217, 2012.

42. K. S. Vali and Balamurugan S, “Overview of Artificial Lightweight Aggregates-A Review,” Int. J. Civ. Eng. Technol., vol. 8, no. 6, pp. 360–369, 2017.

43. A. Sofi and S. Bhattacharya, “Mechanical properties of concrete containing polypropylene fibre and silica fume,” Int. J. Civ. Eng. Technol., vol. 8, no. 7, pp. 143–151, 2017.

44. S. Thirumalini and M.Rajesh, “Reinforcement effect on mechanical properties of bio-fiber composite ”, ,” Int. J. Civ. Eng. Technol.,Vol. 8, no.7, pp 160-166,  2017.

45. N. S. Thankam, V. Rekha, and M. Uma Shankar, “A comprehensive review of different materials as liners in landfills,” Int. J. Civ. Eng. Technol., vol. 8, no. 7, pp. 765–773, 2017.

46. S. Vasantha Kumar, “GPS Based Study of Speed Characteristics of Private and Government Buses in Selected Bus Routes in Tamilnadu , India,” ,” Int. J. Civ. Eng. Technol.,vol. 8, no. 6, pp. 813–819, 2017.

47. K.Pavan Kumar and S. Sri Muruganantham, “Assessment of Rainwater Harvesting Potential for a Part of Chandigarh,” Int. J. Civ. Eng. Technol., vol. 8, no. 9, pp. 91–98, 2017.

48. D. K. Barik, A.D. Singh and M.S.S.Raja, “Estimation of Runoff and Sediment Yield From a Small Ungauged Watersehed Using GIS and HEC-HMS,” Int. J. Civ. Eng. Technol., vol. 8, no. 6, pp. 517–527, 2017.

49. D. Datta, M. P. K, D. K. Barik, and B. Das, “Bio-Accumulation of chromium in Raphanus sativus irrigated with highly chromium contaminated water,” J. Chemical and Pharmaceutical Sciences, vol. 10, no. 1, pp. 2009–2012, 2017.

50. S. Sangtiani, J. Simon, J. Satyanarayana, and D. Sangtiani, “Performance of tall buildings under lateral loads with different type of structural systems,” Int. J. Civ. Eng. Technol., vol. 8, no. 3, pp. 1014–1022, 2017.
 

51. A. Wadhwa, B. Srimuruganandam, and K. Pavan Kumar, “Stream Flow Non-Source Pollutant analysis using SWAT Modelling,” Int. J. Civ. Eng. Technol., vol. 8, no. 7, pp. 283–294, 2017.

52. J. Ghosh and P. Porchelvan, “Remote sensing and GIS technique enable to assess and predict landuse changes in Vellore district, Tamil Nadu, India,” Int. J. Appl. Eng. Res., vol. 12, no. 12, pp. 3474–3482, 2017.

53. K. Srinivasan,  “Durability Studies on the Slag Based Geopolymer Concrete Strengthened,” Int. J. Civ. Eng. Technol., vol. 8, no. 8, pp. 239–250, 2017.

54. B. Jaivignesh and A.Sofi “Study on Mechanical Properties of Concrete Using Plastic Waste as an Aggregate,”IOP Conference Series, Earth and Environmental Science,  vol.80, 2017.

55. T. S. Viswanathan, V. Sairam and K.Srinivasan,  “Study on Edge Slab-Column Connection in Flat Slab,” Int. J. Civ. Eng. Technol.,  vol. 8, no. 9, pp. 53–60, 2017.

56. S. Parthiban, L., Porchelvan, P., Ramasamy, T., Gowri, “Clarification and Disinfection of Water Using Natural Herbs ( Neem and Tulasi ) Azadirachta Indica and Ocimum Sanctum,” J. Chem. Pharm. Sci., vol. 10, no. 1, pp. 507–510, 2017.

57. N. Vaani,  and P.Porchelvan, “GIS Based Agricultural Drought Assessment for the State of Tamilnadu , India Using Vegetation Condition Index ( VCI ),” Int. J. Civ. Eng. Technol.,  vol. 8, no. 5, pp. 1185–1194, 2017.

58. S. S. Saravanan and P. Jagadeesh, “Study on Performance of Manufactured Sand as Fine Aggregates in High Strength Concrete Constructions,” Int. J. Eng. Technol., vol. 8, no. 6, pp. 3014–3020, 2017.
59. C. H. Bala Rama Krishnan and P.Jagadeesh, “Influence of Admixtures on Plastic Wastes in an Eco-Friendly Concrete – A Review,” Int. J. Civ. Eng. Technol.,  vol. 8, no. 6, pp. 388–397, 2017.

60. K. G. R. Varma and P.Jagadeesh,  “Development of Sustainable Susta Inable Concrete Using Agro-Waste Agro Waste and Manufactured Sand : A Review,” Int. J. Civ. Eng. Technol.,  vol. 8, no. 8, pp. 92–100, 2017.

61. P. Jagadeesh and D. Banerjee, “Rapid wall as an alternative building material with low carbon footprint,” J. Chemical and Pharmaceutical Science, vol. 10, no. 1, pp. 100–103, 2017.

62. OM. Suganya and S. K. Sekar, “Study on the effect of nano silica on mechanical properties of concrete,” Int. J. Civ. Eng. Technol., vol. 8, no. 3, pp. 292–301, 2017.

63. S. Sreechanth and K. Yarrakula, “Multi-Temporal Analysis of Sentinel-1 SAR data for Urban Flood Inundation Mapping - Case study of Chennai Metropolitan City,” Indian Journal of Ecology , vol. 44, no. 5, pp. 564–568, 2017.

64. E. S. Lakshmi and Kiran Yarrakula, “Comparative analysis of digital elevation models : A case study around Madduleru River,” Indian J. Geo-Marine Sci., vol. 46, no. 7, pp. 1339–1351, 2017.

65. S. Sreechanth and Kiran Yarrakula, “Comparison and Extraction of Watershed Using Arc Swat and Arc Hydro from High Resolution Digital Elevation Model,” Indian Journal of Ecology, vol. 44, pp. 421–427, 2017.

66. M. V. Kumar and Kiran  Yarrakula, “Comparison of efficient techniques of hyper-spectral image preprocessing for mineralogy and vegetation studies,” Indian J. geomarine Sci., vol. 46, no.05, pp. 1008–1021, 2017.

67. M. Vigneshkumar and Kiran Yarrakula, “Spatial Distribution of Prosopis juliflora Using the Fusion of Hyperspectral and Landsat-8 OLI Imagery,” Indian Journal of Ecology,  vol. 44, no. 5, pp. 548–554, 2017.

68. Vaishnavi. B, Karthikeyan. J and Kiran Y,  “An Assessment Framework for Precipitation Decision Making Using AHP,”ISCO,  pp. 418–421, 2017.

69. S. R. Naraganti, R. M. R. Pannem, and J. Putta, “A Comparative Performance of Sisal and Polypropylene Fibres in Enhancing Tensile Strength of Concrete,” Int. J. Eng. Technol., vol. 9, no. 2, pp. 1475–1483, 2017.

70. Azoom K.T and Rama Mohan Rao P, “Punching Strength And Impact Resistance Study Of Sifcon With Different Fibers,” ,” Int. J. Civ. Eng. Technol.,   vol. 8, no. 4, pp. 1123–1131, 2017.

71. R. R. Nair and  Rama Mohan Rao P “Structural Performance of Recycled Coarse Aggregate Concrete by different curing regimes,” Int. J. Civ. Eng. Technol., vol. 8, no. 4, pp. 1167–1175, 2017.

72. P. P. Kumar and  Rama Mohan Rao P “Packing Density of Self Compacting Concrete Using Normal and lightweight aggregates,” Int. J. Civ. Eng. Technol.,  vol. 8, no. 4, pp. 1156–1166, 2017.

73. B. J. Priyalal and Rama Mohan Rao P,  “Influence of Hybrid Fibres on the Flexural Performance of Self-Compacting Concrete,” Int. J. Civ. Eng. Technol.vol. 8, no. 4, pp. 1189–1195, 2017.

74. S. S. Saravanan and P.Jagadeesh, “Eco Friendly- Manufactured Sand: An Alternative Construction Material for Concrete”,J. Chemical and Pharmaceutical Sciences, Vol 10. No.1, 2017.

75. Tashi Dorji Tamang, Visuvasam J and Simon J, “Effect of Infill Stiffness On Seismic Performance of Moment Resisting Rc Structur”, Int. J. Civ. Eng. Tech.,  Vol.8, No.3, pp.1023-1033, 2017 

76. R. Jeyakumar, S. Parimalarenganayaki and L. Elango, “River Bank Filtration For Natural Treatment of Water In India: A Review:”, Int. J. Civ. Eng. Tech.,  Vol.8, No.8, pp.1203-1212, 2017

77. Mahesh Bakale and T.S. Viswanathan, “Seismic Behavior Of Multi-Story Structure With Different Types of Slabs”, Int. J. Civ. Eng. Tech.,  Vol.8, No.4, pp.507-517, 2017

78. V. Senthilkumar I S.S. Chandrasekaran and V.B. Maji, “Geotechnical characterization and analysis of rainfall—induced 2009 landslide at Marappalam area of Nilgiris district, Tamil Nadu state, India”, Landslide, Vol. 14, pp: 1803-1814, 2017.

79. S.Vilvanathan and S.Shantha kumar, “Continuous biosorption of nickel from aqueous solution using Chrysanthemum indicum derived biochar in a fixed column”, Water Science and Technology, vol. 76.7, pp. 1895-1906,2017.  

80. R.Gobinath, G.P. Ganapathy, I.I. Akinwumi, “ Soil Stabilzation using Asbestoes-free Fiber Powder and Silica Grit”, Jurnal Teknologi, Vol. 79, No.7, pp 1-8, 2017. 

81. S. R. Naraganti, R. M. R. Pannem, and J. Putta, “A Comparative Performance of Sisal and Polypropylene Fibres in Enhancing Tensile Strength of Concrete,” Int. J. Eng. Technol., vol. 9, no. 2, pp. 1475–1483, 2017.

82. Varun teja K, Meena T., “A Review On Ternary Blended Concrete Subjected To Elevated Temperatures followed by different cooling regimes”, International Journal of Pharmacy and Technology, vol. 9, no. 1, pp. 5734–5742, 2017.

83. Narender Reddy, T. Meena, “A Comprehensive Overview on performance of nano silica concrete,” International Journal of Pharmacy and Technology, vol 9,  no.1, 5518-5529, 2017.

84. Sasanka. B. Pulipati, Nitin Tiruttani, Sankalp Jahagirdar, “Highway Cost Allocation Study In India – Ways And Means” Indian Highways,  pp. 35–45, 2017.

85. V. Suveka and T. Shanmuka Priya, “Prediction of Material Price Using Prediction Tools- a comprehension,” Int. J. Sci. Engg. Res., vol. 8, no. 5, pp. 160–164, 2017.

86. Srinivasan, K., Thirumalini, P and Kabbilawsh, “ Assessement of Chennai’s Ambient Air Quality Data using Multivariate Analysis from 2005 to 2015”, Asian Journal of Applied Sciences, vol. 05, No. 02 , pp 320-329, 2017.

87.G. Sunil Reddy, G.N.Sreekanth,  S.Balamurugan. Load Bearing Capability of CFST Columns with and without Shear Connectors  International Journal of Engineering Technology Science and Research, 2017, Vol.4, Pg. No 186-195

88. Vani V., Mandla V.R.    Comparative study of NDVI and SAVI vegetation indices in Anantapur district semi-arid areas    International Journal of Civil Engineering and Technology, 2017, Vol. 8, Pg. No 559-566

89. Thankam N.S., Rekha V., Shankar U. Use of lateritic soil amended with bentonite as landfill liner Rasayan Journal of Chemistry, 2017, Vol. 10, Pg. No 1431-1438

90.Mathew M.M., Srinivasa Rao N., Mandla V.R. Development of regression equation to study the Total Nitrogen, Total Phosphorus and Suspended Sediment using remote sensing data in Gujarat and Maharashtra coast of India. Journal of Coastal Conservation. 2017, Vol.1, Pg.No 1-11

91.Roy S.S., Kulshrestha P., Samui P.  Classifying images of drought-affected area using deep belief network, kNN, and random forest learning techniques  Deep Learning Innovations and Their Convergence With Big Data, 2017, Pg.No.102-119

92. Rao Nagamalleswara K. Pollution prevention in butyl acetate process plant using WAR algorithm. International Journal of ChemTech Research. 2017, Vol.10, Pg. No.422-431

93. Nagamalleswara Rao. K., Haydary J.         Storage tank protection using Aspen hysys          Petroleum and Coal,2017, Vol. 59, Pg.No. 533-542

94. Naga Sai T., Kamatchi P., Santhi A.S. Seismic performance of asymmetrical building with VED and TMD. Journal of Structural Engineering (India), 2017, Vol.44, Pg.No. 494-500

95. Abhinav Wadhwa, B Srimuruganandam, K Pavan Kumar. Stream flow non source pollutant analysis using SWAT modeling. International Journal of Civil Engineering and Technology.2017, Vol.8, Pg.No. 283-294

96. Chakraborti D., Das B., Rahman M.M., Nayak B., Pal A., Sengupta M.K., Ahamed S., Hossain M.A., Chowdhury U.K., Biswas B.K., Saha K.C., Dutta R.N.    Arsenic in groundwater of the Kolkata Municipal Corporation (KMC), India: Critical review and modes of mitigation Chemosphere, 2017, Vol.180, Pg.No.437-447

97. R.Deepan1 & Dr T.S. Viswanathan. Effect of RC cylindrical column using self compacting concrete as a retrofitted material, International Research Journal of Multidisciplinary Science & Technology, 2017, Vol. 02. Pg.No. 99-104

98. Chokkavarapu N., Mandla V.R. Impact assessment of watershed management on land use/land cover change using RS and GIS: A case study International Journal of Civil Engineering and Technology, 2017, Vol.8.Pg.No.394-400

99. Chakraborti D., Rahman M.M., Das B., Chatterjee A., Das D., Nayak B., Pal A., Chowdhury U.K., Ahmed S., Biswas B.K., Sengupta M.K., Hossain M.A., Samanta G., Roy M.M., Dutta R.N., Saha K.C., Mukherjee S.C., Pati S., Kar P.B., Mukherjee A., Kumar M.   Groundwater arsenic contamination and its health effects in India      Hydrogeology Journal, 2017, Vol.25.Pg.No.1165-1181

100. G. Murali., A.S. Santhi., G. Mohan Ganesh. Reducerea proprietatilor mecanice ale betonului armat dispers cu fibre la solicitari de impact/loss of mechanical properties of fiber-reinforced concrete exposed to impact load, Romanian Journal of Materials,2017, Vol.4.Pg.No.491-496

101. Kartik Sunder, Aayush Bhardwaj, Saumya Keswani, Divesh Kumar Jain, Dr.Porchelvan Engineering Study Of Bhuj Earthquake  And  Mitigation Measures International Journal for Research in Applied Science & Engineering Technology,2017, Vol.5.Pg.No.1025-1035

102. Ganapathy G.P., Gobinath R., Akinwumi I.I., Kovendiran S., Thangaraj M., Lokesh N., Muhamed Anas S., Arul murugan R., Yogeswaran P., Hema S.      Bio-Enzymatic Stabilization of a Soil Having Poor Engineering Properties, International Journal of Civil Engineering, 2017, Vol.15,Pg.No.401-409

103. AN Reddy., T Meena     A comprehensive overview on Performance of Alccofine concrete International Journal of Pharmacy and Technology,2017, Vol.9,Pg.No.5500-5506

104. T s ramesh babu., D neeraja    An Experimental Study on Mechanical Properties of Conventional Concrete Low Calcium Fly Ash Blended Concrete Incorporation with Natural Admixture, International Journal of ChemTech Research, 2017, Vol.10.Pg.No.461-476

105. Muthuraj H., Sekar S.K., Mahendran M., Deepak O.P. Post buckling mechanics and strength of cold-formed steel columns exhibiting Local-Distortional interaction mode failure, Structural Engineering and Mechanics, 2017, Vol.64,Pg.No.621-640

106. Mathew N.M., Vishnuvardhan S., Raghava G., Santhi A.S.   Corrosion fatigue crack growth studies on pressure vessel and piping steels in water environment, Archives of Metallurgy and Materials, 2017, Vol.62,Pg.No.1857-1862

107. Debjit Datta., Mithun Prasad., Venkata Ravibabu Mandla. Study of various factors influence on land surface temperature in urban environment, Journal of Urban and Environmental Engineering, 2017,Vol.11.Pg.No 58-62

108. Franco S., Mandla V.R., Ram Mohan Rao K. Urbanization, energy consumption and emissions in the Indian context A review Renewable and Sustainable Energy Reviews, 2017, Vol.71.Pg.No.898-907

109. Sajen S., Jose J.V., Bukke S., Chaithanya Sudha M., Subbarao S.S.V., Mandla V.R. Removal of basic dye from synthetic wastewater using sugarcane bagasse modified with propionic acid. Research Journal of Pharmacy and Technology, 2017, Vol.10, Pg.No.1627-1634

110. Arrowsmith C., Mandla V.R.  Institutional approaches for building intercultural understanding into the curriculum: an Australian perspective. Journal of Geography in Higher Education.2017,Vol.41, Pg.No. 475-487

111. Paul D., Mandla V.R., Singh T. Quantifying and modeling of stream network using digital elevation models, Ain Shams Engineering Journal, 2017, Vol.8, Pg.No. 311-321

112. Rani N., Mandla V.R., Singh T. Evaluation of atmospheric corrections on hyperspectral data with special reference to mineral mapping, Geoscience Frontiers, 2017, Vol.8, Pg.No.797-808

113. Samyak S., Manoj T.P., Santhi A.S. A parametric study of integral bridges subjected to thermal loading    International, Journal of Civil Engineering and Technology, 2017, Vol.8, Pg.No. 431-440

114. Bjit Datta, Midhun Prasad K, Barik, D. K., Bhaskar Das. Bio-Accumulation of chromium in Raphanus sativus irrigated with highly chromium contaminated water. Journal of Chemical and Pharmaceutical Sciences. 2017, Vol.10, Pg.No.42-45

115. Koteswara Reddy G., Nagamalleswara Rao K., Yarrakula K. Insights into structure and function of 30S Ribosomal Protein S2 (30S2) in Chlamydophila pneumoniae: A potent target of pneumonia. Computational Biology and Chemistry. 2017.Vol.66, Pg.No.11-20

116. Manoj, S., Parimalarenganayaki, S.  and Elango, L. (2017)    Estimation of distribution coefficient of uranium in soil by batch tests 14th ICSET-2017  IOP Publishing IOP Conf. Series: Materials Science and Engineering. 263 (3); 032016  doi:10.1088/1757-899X/263/3/032016       0 2633032016

117. Jeyakumar, R., Parimalarenganayaki, S. and Elango, L River Bank Filtration for natural treatment of water in India: A review         International Journal of Civil Engineering and Technology (IJCIET),2017,Pg.No.1203–1212

118. Binita Priyalal and Ramamohan Rao P. Influence of hybrid fibres on the flexural performance of self-compacting concrete. International journal of Civil Engineering and technology.2017, Vol.8, Pg.No.1189-1195

119. Ganesh G.M., Santhi A.S., Kalaichelvan G.        Self-healing bacterial concrete by replacing fine aggregate with rice husk. International Journal of Civil Engineering and Technology,2017,Vol.8,Pg.No.539-545

120. K. Varun Teja, Meena. T. Investigation on the Behaviour of Ternary Blended Concrete with SCBA and SF IOP Conference Series: Materials Science and Engineering,2017, Vol.263,Pg.No1-10

121. Meena .T A Review on Carbonation Study in Concrete IOP Conference Series: Materials Science and Engineering,2017, Vol.263,Pg.No.1-10

122. Srinivasan Karunanithi, Thirumalini Perumal and Kabbilawsh Assessment of Chennai’s Ambient Air Quality Data using Multivariate Analysis from 2005 to 2015. Asian Journal of Applied Sciences.2017, Vol.05,Pg.No.320-329

123. Nishanth, M., Visuvasam, J., Simon, J., and Packiaraj, J. S.  Assessment of seismic response reduction factor for moment resisting RC frames IOP Conf. Series: Material Science and Engineering,2017, Vol.263, Pg.No.1-12

124. Lella J., Mandla V.R., Zhu X. Solid waste collection/transport optimization and vegetation land cover estimation using Geographic Information System (GIS): A case study of a proposed smart-citySustainable Cities and Society,2017, Vol.35, Pg.No.336-349

125. Roy S.S., Sinha A., Roy R., Barna C., Samui P. Spam email detection using deep support vector machine, support vector machine and artificial neural network      Advances in Intelligent Systems and Computing.2017, Vol.634, Pg.No.162-174

126. Neeraja D., Swaroop G. Prediction of compressive strength of concrete using artificial neural networks. Research Journal of Pharmacy and Technology.2017, Vol.10,Pg.No.35-40

127. Rani N., Mandla V.R., Singh T. Spatial distribution of altered minerals in the Gadag Schist Belt (GSB) of Karnataka, Southern India using hyperspectral remote sensing data. Geocarto International. 2017,Vol.32,Pg.No.225-237

128. T. ShanmugaPriya and A.Punitha Kumar. A study on crushed sand as an alternative for natural sand in high performance concrete. International Journal of Civil Engineering and Technology,2017, Vol.8,Pg.No.332-338

129. A. Narender reddy, Meena .T  An Experimental Investigation on Mechanical Behaviour of Eco-friendly Concrete    IOP Conference Series: Materials Science and Engineering.2017,Vol.263,Pg.No.1-10

130. Kartik sundar Aayush Bhardwaj Sarmya keswani Divesh kumar Jain Porchelvan          Engineering study of Bhuj earthquake and mitigation measures       International Journal of research in applied science and engineering Technology.2017. Vol.5,Pg.No.1025-1035

131. Nagamalleswara Rao K. Insights into structure and function of 30S Ribosomal Protein S2 (30S2) in Chlamydophila pneumoniae: A potent target of pneumonia. Computational Biology and Chemistry.2017, Vol.66,Pg.No.11-20

132. Nagamalleswara Rao K Juma Haydary. Optimization and Retrofit Studies for Naphthalene for Naphthalene Production Process. Petroleum and Coal.2017.Vol.59,Pg.No.265-272

133. Banerjee D., Jagadeesh P., Ramamohan Rao P.   Risk analysis and decision support in transportation megaprojects. International Journal of Civil Engineering and Technology.2017.Vol.8,Pg.No.836-845

134. Arthy M., Phanikumar B.R.    Solidification/stabilization of tannery sludge with iron-based nanoparticles and nano-biocomposites. Environmental Earth Sciences.2017, Vol.76

135. Mohan Bhalme, Suraj Sangtiani, Simon Jayasingh, Visuvasam J. Effect of rebar corrosion on the flexural strength of RC beam using finite element analysis. International Journal of Civil Engineering and Technology.2017.Vol.8,Pg.No.193-200

136. J. Visuvasam, J. Simon, R. Chandrasekar. Seismic vulnerability assessment of existing residential building at vellore. International Journal of Civil Engineering and Technology.2017.Vol.8,Pg.No.604-610

137. Akshay Garg, Adhiraj Madhav Dar, Simon Jayasingh, Visuvasam J. Analysis of composite sandwich slabs with patterned web reinforcement. International Journal of Civil Engineering and Technology. 2017.Vol.8,Pg.No.664-674

138. R. Ravi M. Rajesh S. Thirumalini. Mechanical and Physical Properties of Natural Additive Dispersed Lime. Journal of Building Engineering.2017.Vol.15,Pg.No.70-77

139. Balagopal.V,Abdul Rahim,Viswanathan T.S. Sustainable supplementary cementitious materials derived from agro-wastes - A Review. International Journal of Civil Engineering and Technology (IJCIET).2017. Vol.8,Pg.No.572-582

140. S Thirumalini and M Rajesh. Reinforcement effect on mechanical properties of bio-fiber composite. International Journal of Civil Engineering and Technology (IJCIET).2017. Vol.8,Pg.No.160-166

141. Raguraman R., Sailo L. Efficient chromium recovery from tannery sludge for sustainable management. International Journal of Environmental Science and Technology.2017.Vol.14,Pg.No.1473-1480

142. Simon, J., Visuvasam, J., and Susan, B. Study on shear embossments in steel-concrete composite slab. IOP Conf. Series: Material Science and Engineering.2017.Vol.253,Pg.No.1-10

143. Dinesh C., Vinayagamoorthy M., Santhi A.S. Optimum speed of IRC vehicle by time-history analysis of composite I-Girder bridge using MIDAS-CIVIL International Journal of Civil Engineering and Technology.2017. Vol.4,Pg.No.354-359

144. Asfiya Begum, Prakhar Agnihotri, Amit B Mahindrakar, Sumit Kumar Gautam. Degradation of endosulfan and lindane using Fenton’s reagent. Applied Water Science.2017.Vol.7, Pg.No.207-215

145. T. ShanmugaPriya and A.Punitha Kumar. A study on crushed sand as an alternative for natural sand in high performance concrete. International Journal of Civil Engineering and Technology.2017.Vol.8,Pg.No.332-338

146. JV Jose, AM Ealias, MP Saravanakumar. Carbon encapsulated zerovalent iron nanoparticle using  Abelmoschus Esculentus (Ladys Finger) Extract as an adsorbent for Cr(VI) in aqueous solution. Nature Environment and Pollution Technology.2017.Vol.16,Pg.No.89-97

147. Vilvanathan S., Shanthakumar S. Ni2+ and Co2+ adsorption using Tectona grandis biochar: kinetics, equilibrium and desorption studies. Environmental Technology (United Kingdom).2017.Vol.39,Pg.No.464-478

148. Sandanu R Nair and Abdul Rahim. Effects of Nano-material on Concrete.International Journal of Earth Sciences and Engineering.2017.Vol.10,Pg.No.5-10

149. Vignesh Kumar M, Kiran Yarrakula. Nontronite mineral identification in Nilgiri hills of Tamil Nadu using hyperspectral remote sensing. IOP Confenrence Series: Materials Science and Engineering.2017.Vol.263,Pg.No.1-13

150. Koteswara Reddy. G, Kiran Yarrakula. Exploration of geo-mineral compounds in granite mining soils using XRD pattern data analysis. IOP Confenrence Series: Materials Science and Engineering.2017.Vol.263,Pg.No.1-11

151. Chejarla V.R., Mandla V.R., Palanisamy G., Choudhary M.  Estimation of damage to agriculture biomass due to Hudhud cyclone and carbon stock assessment in cyclone affected areas using Landsat-8.Geocarto International.2017.Vol.32,Pg.No.589-602

152. Kolimi shaiksha vali., Abdul Rahim. Mechanical Properties of Light Weight Engineered Cementitious Composites. International Journal of Engineering and Technology.2017.Vol.8,Pg.No.2937-2945

153. Giri R.K.K.V., Mandla V.R. Study and evaluation of carbon sequestration using remote sensing and GIS: A review on various techniques. International Journal of Civil Engineering and Technology.2017.Vol.8,Pg.No.287-300

154. S Vasantha Kumar, Himanshu Gulati and Shivam Arora. Traffic Feasibility Study for a Grade Separator at a Busy Intersection in Vellore. IOP Conf. Series: Materials Science and Engineering.2017.Vol.263,Pg.No.1-8

155. Mahesh Bakale,T.S. Viswanathan. Seismic behavior of multi-story structure with different types of slabs. International Journal of Civil Engineering and Technology     (IJCIET).2017.Vol.8,Pg.No507-517

156. S Vasantha Kumar, Himanshu Gulati and Shivam Arora. Estimation of fuel loss due to idling of vehicles at a signalized intersection in Chennai, India. IOP Conf. Series: Materials Science and Engineering.2017.Vol.263,Pg.No.1-6

157. S Vasantha Kumar, Himanshu Gulati and Shivam Arora. Design of a rotary for an uncontrolled multi-leg intersection in Chennai, India. IOP Conf. Series: Materials Science and Engineering.2017.Vol.263.Pg.No.1-8

158. Samui P., Roy S.S., Kurup P., Dalkiliç Y. Modeling of seismic liquefaction data using extreme learning machine Earthquakes: Monitoring Technology, Disaster Management and Impact Assessment.2017.Pg.No.61-70

159.Mathew, M., Muruganandam, L.“Pyrolysis of Agricultural Biomass using an Auger Reactor: A Parametric Optimization”, International Journal of Chemical Reactor Engineering”, 2017 Vol.15, Pg.No.133-142

160.Vilvanathan, S., Shanthakumar, S.“Column adsorption studies on nickel and cobalt removal from aqueous solution using native and biochar form of Tectonagrandis”, Environmental Progress and Sustainable Energy”, 2017 Vol.36, Pg.No.1030-1038

161.Krishna, C.H.B.R., Jagadeesh, P.“Influence of admixtures on plastic wastes in an eco-friendly concrete -A review”, International Journal of Civil Engineering and Technology”, 2017 Vol.8, Pg.No.388-397

162. Meena, T.“A Review on Ternary Blended Concrete Subjected to Elevated Temperatures Followed by Different Cooling Regimes”, International Journal of Pharmacy and Technology”, 2017 Vol.9, Pg.No.5734-5742

163.Ganapathy, G.P., Gobinath, R., Akinwumi, I.I., Kovendiran, S., Thangaraj, M., Lokesh, N., MuhamedAnas, S., Arul murugan, R., Yogeswaran, P., Hema, S.“Bio-Enzymatic Stabilization of a Soil Having Poor Engineering Properties”, International Journal of Civil Engineering”, 2017 Vol.15, Pg.No.401-409

164.Hirra, A., Fareeda, C., Nirmala, G., Appusami, A., Murugesan, T.“Impact of surface modification of activated carbon on btex removal from aqueous solutions:a review”, Air, Gas, and Water Pollution Control Using Industrial and Agricultural Solid Wastes Adsorbents”, 2017

165.Kumar, K.P., Muruganandam, B.S.“Assessment of rainwater harvesting potential for a part of Chandigarh”, International Journal of Civil Engineering and Technology”, 2017 Vol.8, Pg.No. 91-98

166.Simha, P., Ganesapillai,M.“Ecological Sanitation and nutrient recovery from human urine: How far have we come? A review”, Sustainable Environment Research”, 2017 Vol.27, Pg.No.107-116

167.Bello, M.M., Abdul Raman, A.A., Purushothaman, M.“Applications of fluidized bed reactors in wastewater treatment - A review of the major design and operational parameters”, Journal of Cleaner Production”, 2017 Vol.141, Pg.No.1492-1512

168.Simha, P., Lalander, C., Vinnerås, B., Ganesapillai, M.“Farmer attitudes and perceptions to the reuse of fertiliser products from resource oriented sanitation systems“The case of Vellore, South India”, Science of the Total Environment”, 2017 Vol.581

169.Gnanasundaram, N., Venugopal, A., Ullas, G., Katragadda, Y.“Effect of liquid viscosity and solid inventory on hydrodynamics in a liquid - solid circulating fluidized bed”, Journal of Applied Fluid Mechanics”, 2017 Vol.10, Pg.No.267-271

170.Ishak, N.F., Hashim, N.A., Othman, M.H.D., Monash, P., Zuki, F.M.“Recent progress in the hydrophilic modification of alumina membranes for protein separation and purification”, Ceramics International”, 2017 Vol. 43, Pg.No.42-45

171.Nirmalagnanasundaram.,Aswinvenugopal., Yesaswinkatragadda., Gokulullas. “Effect of Inventory Change in a Liquid- Solid Circulating Fluidized Bed (LSCFB)”, Chemical Product and Process Modeling”, 2017 Vol.12

172.VarunTeja, K., Meena, T.“Investigation on the Behaviour of Ternary Blended Concrete with SCBA and SF”, IOP Conference Series: Materials Science and Engineering”, 2017 Vol.263, Pg.No.1-10

173.Kumar, V., Ganesapillai, M.“Preparation of Activated Carbon from Municipal Organic Solid Wastes”, Materials Today: Proceedings”, 2017 Vol.4

174.Muruganandam, L., Chitra, D.“Effect of impeller blade thickness on critical impeller speed in an agitated vessel”, Scientific Study and Research: Chemistry and Chemical Engineering, Biotechnology, Food Industry”, 2017 Vol.18, Pg.No.377-390

175.Viswanathan, T.S., V. Sairam, and Srinivasan, K.“STUDY ON EDGE SLAB-COLUMN CONNECTION IN FLAT SLAB”, International Journal of Civil Engineering and Technology (IJCIET)”, 2017 Vol.8, Pg.No.53-60

176.Mithra, R., Selvaraj, R., Suganya, O.“Electro-kinetic technique for enhancing durability of concrete”, International Journal of Civil Engineering and Technology”, 2017 Vol.8, Pg.No.801-808

177.Jadhav, P., Mohan Ganesh, G., Vinayagamoorthy,M.“Erection stage dynamic behavior of cable stayed bridge using construction stage analysis”, International Journal of Civil Engineering and Technology”, 2017 Vol.8, Pg.No.252-264

178.Ganesapillai, M., Venugopal, A., Simha, P.“Preliminary isolation, recovery and characterization of polyphenols from waste Tamarindusindica L.”, Materials Today: Proceedings”, 2017 Vol.4

179.Devarajulu, C., Loganathan, M.“The effect of liquid viscosity on critical impeller speed in an agitated vessel”, Recent Innovations in Chemical Engineering”, 2017 Vol.10, Pg.No.127-138

180.Velu, S., Rambabu, K., Monash, P., Sharma, C.“Improved hydrophilic property of PES/PEG/MnCO3 blended membranes for synthetic dye separation”, International Journal of Environmental Studies”, 2017 Vol.4, Pg.No.592-604

181.Viswanathan, T.S., Sairam, V., and Srinivisan, K.“Study on Edge Slab-column connection in flat slab”, International Journal of Civil Engineering and Technology”, 2017 Vol.8, Pg.No.53-60

2016

1. A. Jayaprithika and S. K. Sekar, “Stress-strain characteristics and flexural behaviour of reinforced Eco-friendly coconut shell concrete,” Constr. Build. Mater., vol. 117, pp. 244–250, 2016.

2. A. Jaya Prithika and S. K. Sekar, “Mechanical and fracture characteristics of Eco-friendly concrete produced using coconut shell, ground granulated blast furnace slag and manufactured sand,” Constr. Build. Mater., vol. 103, pp. 1–7, 2016.

3. S. Mandal, R. K. Srivastav, and S. P. Simonovic, “Use of beta regression for statistical downscaling of precipitation in the Campbell River basin , British Columbia , Canada,” J. Hydrol., vol. 538, pp. 49–62, 2016.

4. Roshan Srivastav , K Srinivasan and K P Sudheer, "Simulation - optimization frame work for multi-site multi-season hybrid stochastic steam flow modeling " journal of Hydrology (2016) PP 506-531.

5. B. R. Phanikumar and A. Sofi, “Effect of pond ash and steel fibre on engineering properties of concrete,” Ain Shams Eng. J., vol. 7, no. 1, pp. 89–99, 2016.

6. M. S. Reddy and D. Neeraja, “Mechanical and durability aspects of concrete incorporating secondary aluminium slag,” Resour. Technol., vol. 2, no. 4, pp. 225–232, 2016.

7. B. R. Phanikumar. M. Uma Shankar "Studies on Hydraulic Conductivity of Fly Ash-Stabilised Expansive Clay Liners" . Geotech Geol Eng, 2016, 34:449–462
DOI 10.1007/s10706-015-9956-7

8. G. P Ganapathy, R. Gopinath, I. I Akinwumi"Bio-Enzymatic stabilization of a soil having poor engineering properties", International Journal of civil Engineering (2016) DOI 10.1007/s10706-015-99234-7
9. R. Gopinath, G. P Ganapathy, I. I Akinwumi "Plasticity, Strength, permeability and compressibility charecteristics of black cotton soil stabilized with precipitated silica" J.Cent.South Univ, 2016, 23:2688-2694.

10. Sruthi Krisnan Vijaya Krishnan, Venkata Ravi Babu Mandla, Rama Mohan Rao"A Geo-Spatial approach for the development of hazardous building zonation mapping" Arab J Sci Eng, 2016, 41:1329-1341.
11. E. Thennavan, G. P. Ganapathy, S. S. Chandra Sekaran, and A. S. Rajawat, “Use of GIS in assessing building vulnerability for landslide hazard in The Nilgiris, Western Ghats, India,” Nat. Hazards, vol. 82, no. 2, pp. 1031–1050, 2016.

12. Yogendra Singh, Biju John, G.P Ganapathy, Abilash George, S. Harisanth"Geomorphic observations from South western terminus of palghat gap, South India and their Tectonic Implications" Journal of Earth systems Science. 2016, 25(4), pp. 821-839.

13. A. M. Ealias, J. V. Jose, and M. P. Saravanakumar, “Biosynthesised magnetic iron nanoparticles for sludge dewatering via Fenton process,” Environ. Sci. Pollut. Res., vol. 23, no. 21, pp. 21416–21430, 2016.

14. S. Abinandan and S. Shanthakumar, “Evaluation of photosynthetic efficacy and CO2 removal of microalgae grown in an enriched bicarbonate medium,” 3 Biotech, vol. 6, no. 1, pp. 1–9, 2016.

15. J. Umamaheswari and S. Shanthakumar, “Efficacy of microalgae for industrial wastewater treatment: a review on operating conditions, treatment efficiency and biomass productivity,” Rev. Environ. Sci. Biotechnol., vol. 15, no. 2, pp. 265–284, 2016.

16. S. Vilvanathan and S. Shanthakumar, “Ni (II) adsorption onto Chrysanthemum indicum: Influencing factors, isotherms, kinetics, and thermodynamics,” Int. J. Phytoremediation, vol. 18, no. 10, pp. 1046–1059, 2016.

17. S. Vilvanathan and S. Shanthakumar, “Removal of Ni(II) and Co(II) ions from aqueous solution using teak (Tectona grandis) leaves powder: adsorption kinetics, equilibrium and thermodynamics study,” Desalin. Water Treat., vol. 57, no. 9, pp. 3995–4007, 2016.

18. J. Chukki and S. Shanthakumar"Optimization of Malachite Green Dye Removal by Chrysanthemum Indicum Using Response Surface Methodology" Environmental Progress & Sustainable Energy (Vol.35, No.5) DOI 10.1002/ep

19. A. Dhamodharan, S. Shanthakumar, and G. P. Ganapathy, “Assessment of seasonal disparity on hydrogeochemical facies distribution in Cooum river, India,” Asian J. Earth Sci., vol. 9, no. 1, pp. 27–35, 2016.

20. G. Vijayaraghavan and S. Shanthakumar, “Performance study on algal alginate as natural coagulant for the removal of Congo red dye,” Desalin. Water Treat., vol. 57, no. 14, pp. 6384–6392, 2016.

21. M. Muthukumar and S. K. Shukla, “Swelling behaviour of expansive clay beds reinforced with encased granular pile anchors,” Int. J. Geotech. Eng., vol. 6362, no. November, pp. 1–9, 2016.

22. D. S. Raghavendra, K. Sivasubramanian, A. Sivakumar, and M. Hareesh, “Experimental evaluation of crack depth in concrete specimens using time-of-flight technique,” J. Struct. Eng., vol. 43, no. 3, pp. 311–318, 2016.

23. G. P Ganapathy, Sreeja Karanam, S. S Chandrasekaran, M. Saravana Ganesh "Liquefaction Potential Susceptibility Mapping in Urban Areas" International Journal of Advances in Mechanical and Civil Engneering 2(1) pp. 38-42.

24. S. Shanthakumar, “Assessment of Seasonal Variations in Surface Water Quality of Cooum River in Chennai , India – a Statistical Approach,” vol. 18, no. 3, pp. 527–545, 2016.

25. N. Sridevi and Kiran Yarrakula"Different techniques for landslide zonation maping and landslide assessment: a review" Indian Journal Of Science and Technology 9(47).

26. Koteshwara Reddy and Kiran Ernakkula "Analysis of accident in chemical process industries in the period 1998-2015" 9(4) pp 177-191.

27. S. Priyadarsini, Kiran Ernakkula and Pijush Samui "Flood prediction analysis of Wadanepally gauging station" Indian Journal Of Ecology 2016 43 S.I(1) pp 40-44.

28. Durga Devi Pitani, P. R. K Prassad, and Kiran Ernakkula" soil nutrient status and mapping in kavli revenue division of Nellore district , Andhrapradesh , India " Eco. Env.& Cons 22(1):2016 PP 163-167

29. Kiran Ernakkula, K.S Kumar and G.Samrat "Hydrodynamic modelling of Krishna river for the assessment of flood affected areas using remote sensing and GIS" Eco. Env.& Cons,22(1) pp 331-337,2016.

30. M. Venkata rao, P. Rama Mohan Rao "Genetic Programming And Multi Variate Adaptive Regression Splines For Prediction of Bridge Risks and Comparison of Performances" International Journal Of Optimization in Civil Engineering ,vol 6, no.4, pp 549-557,2016.

31. Purana Prassad Rao and Rama Mohan Rao P "Retrofitting of reinforce concrete beams using Rubberised coir Fibre sheets" SSSRC-IJCE, vol.3,no. 3, pp 20-28, 2016.

32. Gandi Sathi Babu, P Rama Mohan Rao "Properties of self compacting concrete using poly propylene Fibres" SSSRC-IJCE, vol.3,no.3, pp 29-36, 2016.

33. R. R. Kumar, P. Jagadeesh, and P. R. M. Rao, “Strength Properties Of Concrete Containing Coal Washery Rejects As Coarse Aggregate,” Asian Journal of Civil Engineering ,vol.17,no.6, pp. 859–867,2016.

34. N. Srinivasa Rao, P. Rama Mohan Rao and P. Jagadeesh, “Compressive Strength of Mono – Fibre Reinforced Concrete containing Polypropylene and Sisial Fibres,”International Journal of Earth sciences and Engineering ,Vol. 9, No.3 pp 995-998,2016.

35. Chintalapudy Karthik, Rama Mohana Rao P "Properties of Bacterial based self healing concrete- A review" Int.J. ChemTech Res. Vol.9, No.2, pp 182-188, 2016.

36. N. S. Rao, P. R. M. Rao, P. Jagadeesh, and B. Sciences, “Experimental Evaluation of Strength Properties of Steel Fibre Reinforced Concrete”, Vol. 17, No. 4, pp 487–494, 2016.

37. R. R. Kumar, K. Shalini, J. G. Jawahar, P. Jagadeesh, and P. R. M. Rao, “Compressive Strength Of Concrete Made With Coal Washery Rejects As Coarse Aggregate,” vol. 17, no. 2, pp. 271–276, 2016.

38. Koteshwara Reddy and Kiran Ernakkula "Identification Of Research Trends in Chemical Process Design - A review"  Int.J. ChemTech Res, vol. 9,no.5, pp 585-595, 2016.

39. M. Muthukumar and M. Uma Shankar, “A short review on analysis, behaviour and construction of encased stone columns,” Disaster Adv., vol. 9, no. 2, pp. 1–3, 2016.

40. S. Thirumurugan and S. K. Sekar, “Impact toughness properties of polymer latex modified concrete composites,” Indian J. Sci. Technol., vol. 9, no. 44, 2016.

41. A. Basheerudeen and S. K. Sekar, “Flexural And Punching Shear Characterization For Self Compacting,” vol. 7, no. 5, pp. 187–201, 2016.

42. J. Vikram and K. Sekar, “Punching of slag based concrete incorporating polymeric and nonpolymeric fibres,” Polym. Polym. Compos., vol. 24, no. 7, pp. 573–578, 2016.

43. T. S. Viswanathan, K. Srnivasan, V. Sairam and M. Giriraj "Influence of temperature on behaviour of concrete" Journal of Chemical and Pharmaceutical Sciences Special Issue 3: August 2016 pp 97-100.

44. M. D. Chiranjeevi and J. Simon, “Analysis of Reinforced Concrete 3d Frame under Blast Loading and Check for Progressive Collapse,” Indian J. Sci. Technol., vol. 9, no. 30, pp. 1–6, 2016.

45. B. Subrahmanya Prasanth and J. Simon, “Study on Behaviour of Asymmetric Building with Different Column Sections under Seismic Loading,” Indian J. Sci. Technol., vol. 9, no. 30, pp. 1–5, 2016.

46. Athira, K. K. Samuel and S. S. Abraham, Simon J “Pushover Analysis Of Soft Storey Building Under Seismic Load,” Asian Journal of Science and Technology, Vol.07(11) PP 3707-3711 2016.

47. B. Srimuruganandam and J. Jose, “Air Quality Management through Receptor Modelling,” Indian J. Sci. Technol., vol. 9, no. 32, pp. 1–6, 2016.

48. R. R. Kumar, P. Jagadeesh, and P. R. M. Rao, “Strength Properties of Concrete Containing Coal Washery Rejects As Coarse Aggregate,” vol. 17, no. 6, pp. 859–867, 2016.

49. Thirumalini. S, S. K Sekar, R. Ravi “Revealing the ancient secret of lime mortar exposed to marine environment used in and around Padaleeswarar ... 4 th Historic Mortars Conference,” no. September 2016 PP 93-103.

50. S. Thirumalini, R. Ravi, Anil Girgoswami“Role of organic gum on hydrated phases of lime and cement mortar Role Of Organic Gum On Hydrated Phases,” Int.J.Chem.Sci 14(SI), 2016 pp 97-108.

51. J. Anamangadan, G. G. Maria, and A. Degaonkar, Simon J “Pushover Analysis Of A Multistoried Building With And Without Shear Wall Under Seismic Load,”Asian Journal of Science and Technology, Vol.07(11) PP 3712-3715 2016.

52. K. V Roopavathi and S. Shanthakumar, “Adsorption of Basic Green 1 Dye Using Activated Carbon From Curcuma longa : Kinetics , Equilibrium and Thermodynamic Studies,”IJEP vol. 36, no. 4, pp. 283–292, 2016.

53. J. Padmapriya and S. Shanthakumar, “Removal of Cationic Dye (Basic Green) Using Raw and Modified Eichhorniacrassipes : Adsorption Kinetics, Isotherms , Thermodynamics and Mechanism Studies,” IJEp vol. 36, no. 12, pp. 1001–1014, 2016.

54. S. Sampath Kumar and T. S. Viswanathan, “Invasion of Prosopis Juliflora: Still a valuable species in arid and coastal areas of Tamil Nadu, India,” Int. J. Earth Sci. Eng., vol. 9, no. 5, pp. 1966–1971, 2016.

55. R. S. Endluri and Shanthakumar Subramaniam, “a Study on Recovery of Silica and Alumina From Fly Ash,” Eniv Engg and mang vol. 15, no. 4, p. 835-839, 2016.

56. T. Meena, “Investigation of hybrid fibre reinforced self- Compacting concrete beam-column joints with and without ductile detailing,” J. Chem. Pharm. Sci., vol. 9, no. 4, pp. 3496–3503, 2016.

57. K. V. Roopavathi and S. Shanthakumar"Adsorption capacity of  Curcuma longa for the removal of basic green1 dye – equilibrium, kinetics and thermodynamic study" Journal Of Environmental Biology 37(1) PP 979-984.
58. C. Harshavardhan and S. Balamurugan, “Study on High-Density Concrete Reinforced With Steel Fiber At Elevated Temperatures,” APRN J Engg and App sci vol. 11, no. 19, pp. 11415–11420, 2016.

59. T. S. Ramesh Babu and D. Neeraja, “Effect of natural admixture on fresh properties and compressive strength of class C Fly Ash blended concrete,” Asian J. Civ. Eng., vol. 17, no. 3, pp. 373–384, 2016.

60. A. Sofi and Siddarth George “An analysis of hydrated lime included flyash concrete based on SEM" The IUP Journal of Stuct Engg 9(4) 47-52.

61. S. S Saravanan, P. Jagadeesh " Effect of Manufactured sand on durability characteristics of concrete" carbon-sci. Tech 8(4) 70-81.

62. A. Sofi and B. R. Phanikumar, “Durability properties of fibre-reinforced pond ash-modified concrete,” J. Eng. Sci. Technol., vol. 11, no. 10, pp. 1385–1402, 2016.

63. A. Sofi, “An experimental investigation on dynamic modulus of elasticity of fly ash based steel fiber reinforced concrete,” JCHPS no. 3, pp. 83–85, 2016.

64. A. Sofi, “Sustainable concrete with waste tyre rubber - An overview,” J. Chem. Pharm. Sci., vol. 9, no. 2, pp. 848–853, 2016.

65. A. Sofi, P. Phalpher, and M. P. Singh, “Geo-polymer ferrocement slabs- an experimental investiagtion,” J. Chem. Pharm. Sci., vol. 9, no. 1, pp. 82–85, 2016.

66. T. Babu and D. Neeraja, “Rice Husk Ash as Supplementary Material in Concrete–A Review,” Int. J. ChemTech Res., vol. 9, no. 5, pp. 332–337, 2016.

67. A. Mathew, A. Dubey, and A. B. Mahindrakar, “Study of Constructed Wetland for Treatment of Landfill Leachate,”  Int. J. ChemTech Res vol. 9, no. 11, pp. 87–95, 2016.

68. M. Vinayagamoorthy, G. Mohan Ganesh, and A. S. Santhi, “Secondary analysis for pile foundation by P-Δ method,” Int. J. Appl. Eng. Res., vol. 11, no. 3, pp. 1579–1582, 2016.

69. Nishanth M and Visuvasam J, “Evaluation of ductility factor for special moment resisting RC frames,” IJAER vol. 10, no. 93, pp. 125–131, 2015.

70. U. Agrawal, A. Garg, V. Dhingra, and Visuvasam Joseph Antony, “Estimation of Bending Moment Coefficients of Two Way RC Slabs: Finite Element Approach,” Indian J. Sci. Technol., vol. 9, no. 30, pp. 2–7, 2016.
71. S. Parimalarenganayaki and L. Elango, “Managed aquifer recharge by check dam benefiting the society? A case study,” Water Energy Int., vol. 58RNI, no. 10, pp. 47–54, 2016.

72. G. Murali, A. S. Santhi, and G. Mohan Ganesh, “Loss of mechanical properties of fiber-reinforced concrete exposed to impact load ”  Rom. J. Mater., vol. 46, no. 4, pp. 491–496, 2016.

73. Piyush Guptha and Neeraja D “Analysis of Various RCC Lateral Force Resisting systems and their comparison using ETABS “ Int Journal of Latest Trends in Engineering and tech 6(4)PP 175-182, 2016.

74. V. K. C. C and D. Neeraja, “Experimental Study on Strength Assessment of Concrete With Partial Replacement of Activated Carbon,” IJASTEMS 2 no. 10, pp. 61–64, 2016.

75. T. S. V. AkhilKumar, A. V. Ch.Sai bharath, Firoz khan patan, “A Study on Effect of Metallised Fly Ash On Concrete,” Int. J. Regist. Sci. Technol., vol. 1, no. 1, pp. 85–90, 2016.

76. G. Meena, T, Elangovan, “Stress-Strain Characteristics of Steel Fibre Based Hybrid Fibre Reinforced Self- Compacting Concrete,” Int. Journal. All Res. Educ. Sci. Methods, vol. 4, no. 6, pp. 279–290, 2016.

77. J. Ghosh and P. Porchelvan, “Multi-temporal satellite image and GIS based assessment of urban Landuse changes in Vellore city, Tamilnadu,” IJGG vol. 6, no. 4, pp. 1759–1768, 2016.

78. P. Yadali, R. Selvaraj, and N. D, “Proof of Conceptual Study on Alternate Binders,” IOSR J. Mech. Civ. Eng., vol. 13, no. 5, pp. 22–27, 2016.

79. A Sofi, “Rubber Tyre and Lathe scrap Material for production of green concrete” An Article in New construction Materials 29(3), pp. 76-82.

80. S. S. Saravanan and P. Jagadeesh, “Experimental Investigation non Strength Properties of M50 Grade Concrete With Replacement of Fine Aggregate by M-Sand – A Comparative Study With and Without using Admixture,”IJITEE 6no. 2, pp. 20–24, 2016.

81. P. K. K and A. Wadhwa, “A Review of Storm Water Management Methods,”Int.J.Rev.Life.Sci vol. 6, pp. 1–7, 2016.

82. S. Sripad, S. Joshi, P. Gupta, and S. Jayasingh, “Comparative Analysis of Natural Frequencies of Simply Supported Beams,” Int J of Eng res in Mech and Civ Eng vol. 1, no. 5, pp. 62–65, 2016.

83. K. Dabral, R. Selvaraj, and S. J, “Principles and Experimental Methods for Underwater Concrete Formulations,” IOSR J. Mech. Civ. Eng., vol. 13, no. 5, pp. 31–34, 2016.

84. M. R, R. Selvaraj, and O. Suganya, “Applications of Electro-kinetic Principles for Enhancing Durability of Concrete,” IOSR J. Mech. Civ. Eng., vol. 13, no. 5, pp. 28–30, 2016.

85. Srinivasan. K, Syed Atheeq. A, Gogul. A, Chevvell. K. E “Characteristics Study On Mechanical Properties Of Slag Based Geopolymer Concrete”03 (05) PP 1984-1988.

86. K. Srinivasan, R. Vazhviniyan, L. Mohankumar, and K. Palpandi, “Replacement of Fine Aggregate Using Sludge in Concrete,” Int. Res. J. Eng. Technol., vol. 3, no. 5, pp. 1989–1993, 2016.

87. S. Khanapur and J. Visuvasm, “Behaviour of Outrigger System for High Rise Slender Building,” Advances in natural and applied sciences vol. 10, no. 3, pp. 58–62, 2016.

88. S. Chandravadani, N. Thomas, and M. Hareesh, “Numerical Investigation On Cold Form Lipped Channel Steel Section Under Eccentric Loading,” Int J of Adv res in Sci and Eng 5(1) pp. 60–68.

89. P. L and D. A. Mahindrakar., “Contamination Transport in Groundwater From Municipal Solid Waste Landfill Pollutants.,” Int. J. Adv. Res., vol. 4, no. 9, pp. 4–9, 2016.

90. B.R. Phanikumar, “Influence of Geo grid Reinforcement on Pullout Response of Granular Pile-Anchors (GPAs) in Expansive Soils”         Indian Geotechnical Journal.,  vol. 46, pp. 437-444, 2016.

91. D. Subburaman, J.Jagan, Y.Dalkiliç, P.Samui, “Reliability analysis of slope using MPMR, GRNN and GPR” Civil and Environmental Engineering: Concepts, Methodologies, Tools, and Applications, vol.2, pp 712-726, 2016.

92. V.K. Kancherla,V.R. Mandla, C.Arrowsmith, ”Study of thermal IR phenomena associated with 27 February 2010 Chile Mw 8.8 earthquake using MODIS data” Geo carto International., pp.1-17, 2016.              

93. P.Samui, D.Choubisa, A.Sharda. “Application of artificial neural network and genetic programming in civil engineering” Civil and Environmental Engineering: Concepts, Methodologies, Tools, and Applications, vol. 2, pp. 1022-1036, 2016.

94. E.Subbu Lakshmi, K.Yarrakula. “Monitoring land use land cover changes using remote sensing and gis techniques: A case study around papagni river, Andhra Pradesh, India” Indian Journal of Ecology, vol 43, pp. 383-387, 2016.

95. R.Devaraj, V.R.Mandla, S.K.Praveen, J.Lella. “Reed bed systems for treatment of poultry pre-treated wastewater” International Journal of Research in Pharmaceutical Sciences, vol. 7, pp. 245-249, 2016.

96. N.Rani, V.R.Mandla, T.Singh. ”Performance of image classification on hyper spectral imagery for lithological mapping” Journal of the Geological Society of India, vol.8, pp.440     -4 48, 2016.

97. V.S.Shah, H.R.Shah, P.Samui. “Application of meta-models (MPMR and ELM) for determining OMC, MDD and soaked CBR value of soil” Artificial Intelligence: Concepts, Methodologies, Tools, and Applications, vol.2, pp.1167-1195, 2016.

98. P.Samui, J.Jagan, R.Hariharan. “An Alternative Method for Determination of Liquefaction Susceptibility of Soil”    Geotechnical and Geological Engineering, vol.34, pp.735-738, 2016.

99. M.Uma Shankar, B.R.Phanikumar. “Leachate studies on fly ash-stabilised expansive clay liners” Geomechanics and Geoengineering, vol.11, pp.114-118, 2016.

100. A.Sofi, A.Shukla. ”An experimental investigation on dynamic modulus of elasticity of fly ash based steel fiber reinforced concrete”          Journal of Chemical and Pharmaceutical Sciences, pp.83-85, 2016

101. M.Arthy, B.R.Phanikumar. “Leachate analysis of the tannery sludge amended by zero-valent iron nanoparticles under dynamic condition” Journal of Chemical and Pharmaceutical Sciences, pp.9-3, 2016.

102. J.Jagan, Y.Dalkilç, P.Samui. “Utilization of SVM, LSSVM and GP for predicting the medical waste generation” Smart Cities as a Solution for Reducing Urban Waste and Pollution, pp.224-251, 2016.        

103. Chowdhury S., Maniar A., Suganya O.M.”Strength development in concrete using agricultural byproduct and use of soft computing models to predict strength parameter” Indian Concrete Journal, vol.90     , pp.73-78, 2016.

104. Ganesapillai M., Simha P., Beknalkar S.S., Sekhar D.M.R.”Low-grade rock phosphate enriched human urine as novel fertilizer for sustaining and improving agricultural productivity of Cicer arietinum” Sustainable Production and Consumption, vol.6, pp.62-66, 2016.

105. A.Mohammed Imran and A. Abdul Rahim ”Strength Assessment of Laminated Cold form Steel Beams” Indian Journal Of Applied Research, vol.6, pp.563-  565, 2016.

106. Kheti Huseni, PanaskarSourabhVilasrao,Tashi DorjiTamang, Abdul Rahim. A “Optimization of strength properties for Self Compacting Concrete by Taguchi Method” International Journal of Scientific & Engineering Research, vol.7, pp.1719-1724, 2016

107. Phanikumar B.R., Singla R. ”Swell-consolidation characteristics of fibre-reinforced expansive soils” Soils and Foundations, vol.56, pp.138-143, 2016.

108. Gobinath R., Ganapathy G.P., Akinwumi I.I., Kovendiran S., Hema S., Thangaraj M. “Plasticity, strength, permeability and compressibility characteristics of black cotton soil stabilized with precipitated silica” Journal of Central South University, vol.23, pp.2688-2694, 2016.

109. Nagamalleswara Rao K “Reactive Distillation Design and Control” Emerging Trends in Chemical Engineering, vol.3, pp.31-39, 2016.

110. Kheti Huseni, Panaskar Sourabh Vilasrao, Tashi Dorji Tamang and Abdul Rahim. A “Analysis of Seismic Torsional Pounding Effect in Adjacent Buildings Evaluating by Indian Standard Codes” Indian Journal Of Natural Sciences, vol.7, pp.11667-11677, 2016.

111. Nagamalleswara rao Kanidarapu. ”Binary Distillation Design and Control” Emerging Trends in Chemical Engineering, vol.3, pp.19-25, 2016.

112. Abdul Rahim and Sandanu. R.Nair, “Influence of Nano-Materials in High Strength Concrete” Journal of Chemical and Pharmaceutical Sciences, vol.3, pp.16-22, 2016

113. A. Abdul Rahim, A. Rahaman, “influence of Different Waste Materials on the Compressive Strength of Medium Strength concrete” Journal of Chemical and Pharmaceutical Sciences, vol.3, pp. 63-67, 2016.

114. Jagan J., Samui P., Meghana G. ”Determination of stability number of layered slope using ANFIS, GPR, RVM and ELM” Soft Computing: Developments, Methods and Applications, pp.39-68, 2016.

115. Franco S., Mandla V.R., Mohan Rao K.R. ”Estimation of bright roof areas for large scale solar PV applications to meet the power demand of megacity Hyderabad” Applied Solar Energy, vol.52, pp. 284-289, 2016.

116. Samui P.”Prediction of fracture parameters of concrete by relevance vector machine” International Journal of Engineering Research in Africa, vol.17, pp.1-7, 2016.                     

117. Srusti Chand, Krishna Khandelwal, Barik, D. K.”Runoff Estimation by using low Impact Development (LID) Approach from a Small Watershed” International Journal of Advanced Technology in Engineering and Sciences, vol.4, pp.342-350, 2016.

118. Edison Thennavan, Ganapathy Pattukandan Ganapathy, S.S. Chandrasekaran, Ajay S. Rajawat “Use of GIS in assessing building vulnerability for landslide hazard in The Nilgiris, Western Ghats, India, Natural Hazards      , vol.82, pp.1031-1050, 2016.

119. T.S.Viswanathan, K.Srnivasan, V.Sairam, M.Giriraj.” Influence of temperature on behaviour of concrete” vol.3, pp.97, 2016.

120. Venkata Rao and P. Rama Mohan Rao.  “programming and Multivariate Adaptive regression splines for predictions of bride risks and comparison of performances” vol.6, pp.547-555, 2016.

121. Malarvizhi, K., S.Vasantha Kumar, and P.Porchelvan ”Use of High Resolution   Google Earth Satellite Imagery in Landuse Map Preparation for Urban Related Applications “Procedia Technology, vol.24, pp.1835-1842, 2016.

122. Deo R.C., Samui P., Kim D. ”Estimation of monthly evaporative loss using relevance vector machine, extreme learning machine and multivariate adaptive regression spline models” Stochastic Environmental Research and Risk Assessment,     vol.30, pp.1769-1784, 2016.

123. Arthy M., Phanikumar B.R. ”Efficacy of iron-based nanoparticles and nanobiocomposites in removal of Cr3+” Journal of Hazardous, Toxic, and Radioactive Waste, vol. 20, 2016.

124. Jagan j., Swaptik chowdhury., Pratik goyal., Pijush samui., Yildirum dalkilic. Determination of Bearing Capacity of Shallow Foundation Using Soft Computing Problem Solving and Uncertainty Modeling through Optimization and Soft Computing Applications. 2016. Pg.No. 292-328           

125. N.Sreenivasarao , P. Rama Mohan Rao, and P.Jagadeesh. Compressive strength of Mono fibre reinforced concrete containing polypropylene and sisal fibres. International Journal of Earth science and Engineering. 2016. Vol.9, Pg.No. 969-972

126. Phanikumar B.R., Raghav R., Bhargav K.         Collapse behaviour of a lateritic soil. Geomechanics and Geoengineering          . 2016. Vol.11, Pg.No. 119-124

127. Samui P., Kumar R., Kurup P. Determination of Optimum Tool for Efficient Rock Cutting Geotechnical and Geological Engineering. 2016. Vol. 34, Pg.No. 1257-1265

128. Subbaraoa S.S.V., Krishnarao K.V. Activity based approach to travel demand modelling: An overview European Transport - Trasporti Europei. 2016. Vol. 61

129. Jagan J., Chowdhury S., Goyal P., Samui P., Dalkiliç Y. Determination of bearing capacity of shallow foundation using soft computing. Nature-Inspired Computing: Concepts, Methodologies, Tools, and Applications. 2016. Vol. 42797, Pg.No.1590-1626

130. Jagan J., Goyal P., Chowdhury S., Samui P., Dalkiliç Y. Determination of bearing capacity of shallow foundation using soft computing. Artificial Intelligence: Concepts, Methodologies, Tools, and Applications. 2016. Vol.3, Pg.No. 1687-1722

131. Abdul rahim a, Anun s pramod. Construction of Key Mix Proportions of Concrete for Harsh Environments. Journal of Chemical and Pharmaceutical Sciences. 2016. Pg.No.73-78

132. Srinivasa Rao N., Rama Mohan Rao P., Jagadeesh P. Compressive strength of mono -fibre reinforced concrete containing polypropylene and sisial fibres. International Journal of Earth Sciences and Engineering. 2016. Vol.9, Pg.No.969-972

133. Rajesh Kumar R., Shalini K., Guru Jawahar J., Jagadeesh P., Rama Mohan Rao P.          Compressive strength of concrete made with coal washery rejects as coarse aggregate. Asian Journal of Civil Engineering. 2016. Vol.17, Pg.No.271-276 

134. Samui P. Determination of pull out capacity of small ground anchor using data mining techniques. Civil and Environmental Engineering: Concepts, Methodologies, Tools, and Applications. 2016. Pg.No.360-368

135. Sonu K., Das B. Comparison of the output voltage characteristics pattern for sewage sludge, kitchen waste and cow dung in single chamber single electrode microbial fuel cell. Indian Journal of Science and Technology. 2016. Vol. 9

136. Viswanathan R., Samui P. Determination of rock depth using artificial intelligence techniques. Geoscience Frontiers.2016. Vol.7, Pg.No.61-66

137. Singhal S., Sharma R.S., Phanikumar B.R. A laboratory study of collapse behaviour of remoulded loess under controlled wetting and flooding. Geomechanics and Geoengineering. 2016. Vol.11, Pg.No.159-163

138. Samui P., Kurup P., Dhivya S., Jagan J. Reliability Analysis of Quick Sand Condition. Geotechnical and Geological Engineering. 2016. Vol. 34, Pg.No. 579-584

139. Chakraborti D., Rahman M.M., Chatterjee A., Das D., Das B., Nayak B., Pal A., Chowdhury U.K., Ahmed S., Biswas B.K., Sengupta M.K., Lodh D., Samanta G., Chakraborty S., Roy M.M., Dutta R.N., Saha K.C., Mukherjee S.C., Pati S., Kar P.B. Fate of over 480 million inhabitants living in arsenic and fluoride endemic Indian districts: Magnitude, health, socio-economic effects and mpg.itigation approaches. Journal of Trace Elements in Medicine and Biology. 2017. Vol.38. Pg.No.33-45

140. Chejarla V.R., Maheshuni P.K., Mandla V.R.. Quantification of LST and CO2 levels using Landsat-8 thermal bands on urban environment. Geocarto International. 2016. Vol. 31, Pg.No.913-926

141. Yuvaraj S., Srinivasan K. Performance of geopolymer concrete using varying sizes of steel fibres. Indian Journal of Science and Technology. 2016. Vol.9

142. Singh A., Phanikumar B.R., Prasad R. Effect of geogrid reinforcement on load carrying capacity of a coarse sand bed. International Journal of Civil Engineering and Technology. 2016. Vol.7, Pg.No.1-6

143. Kesavan G., Chandrasekaran S.S. Factors Influencing the Behaviour of Flexible Pile Groups Under Lateral Loading in Soft Clay. Indian Geotechnical Journal.2016. Vol. 46, Pg.No. 141-151   

144. Roopavathi K.V., Shanthakumar S. Adsorption of basic green 1 dye using activated carbon from Curcuma longa: Kinetics, equilibrium and thermodynamic studies. Indian Journal of Environmental Protection.2016. Vol.36, Pg.No.283-292

145. Roy S., Jagan J., Samui P. Determination of work zone capacity using ELM, MPMR and GPR. Artificial Intelligence: Concepts, Methodologies, Tools, and Applications. 2016. Vol.3, Pg.No. 1962-1980

146. Srinivasa Rao N., Rama Mohan Rao P., Jagadeesh P. Experimental evaluation of strength properties of steel fibre reinforced concrete. Asian Journal of Civil Engineering. 2016. Vol.17,Pg.No.487-494

147. Nagamalleswara Rao K. Pinch analysis of acrylic acid process plant. International Journal of ChemTech Research.2016.Vol.9,Pg.No.432-439

148. Das R., Vishal Kumar S., Prakash B., Dharmik, Subbarao S.S.V. Analysis of university students travel behaviour: En route to sustainable campus. Indian Journal of Science and Technology.2016.Vol.9

149. Chowdhury S., Hariharan R., Goyal P., Samui P. Determination of stability of rock slope using intelligent pattern recognition techniques. Artificial Intelligence: Concepts, Methodologies, Tools, and Applications.2016.Vol.1,Pg.No.558-579

150. Kumar M., Samui P., Naithani A.K. Determination of stability of epimetamorphic rock slope using Minimax Probability Machine Geomatics, Natural Hazards and Risk.2016.Vol.7,Pg.No.186-193

151. Phanikumar, B.R., Uma Shankar, M. “Studies on Hydraulic Conductivity of Fly Ash-Stabilised Expansive Clay Liners”, Geotechnical and Geological Engineering”, 2016 Vol.34, Pg.No.449-462

152. Simha, P., Mathew, M., Ganesapillai, M. “Empirical modeling of drying kinetics and microwave assisted extraction of bioactive compounds from Adathoda vasica and Cymbopogon citrates”, Alexandria Engineering Journal”, 2016 Vol.55, Pg.No.141-150

153. Ganesapillai, M., Mathew, M., Singh, A., Simha, P. “Influence of microwave and ultrasound pretreatment on solvent extraction of bio-components from walnut (Julgans regia L.) shells”, Periodica Polytechnica Chemical Engineering”, 2016 Vol.60, Pg.No.40-48

154. Vijayakrishnan, S.K., Mandla, V.R., Pannem, R.M.R. “A Geospatial Approach for the Development of Hazardous Building Zonation Mapping”, Arabian Journal for Science and Engineering”, 2016 Vol.41, Pg.No.1329-1341

155. Antony, D., Murugavelh, S. “Anaerobic co-digestion of kitchen waste and wastewater sludge: biogas-based power generation”, Biofuels”, 2016 Vol.9, Pg.No.1-6

156. Vilvanathan, S., Shanthakumar, S. “Ni (II) adsorption onto Chrysanthemum indicum: Influencing factors, isotherms, kinetics, and thermodynamics”, International Journal of Phytoremediation”, 2016 Vol.18, Pg.No.1046-1049

157. Dhamodharan, A., Shanthakumar, S., Ganapathy, G.P. “Assessment of seasonal variations in surface water quality of cooum river in Chennai, India- A statistical approach”, Global Media Journal”, 2016 Vol.18, Pg.No.527-545

158. Ganesapillai, M., Simha, P., Gupta, K., Jayan, M. “Nutrient Recovery and Recycling from Human Urine: A Circular Perspective on Sanitation and Food Security”, Procedia Engineering”, 2016 Vol.148, Pg.No.62-66

159. Anoop Raj, J.R., Muruganandam, L. “Microbial growth and degradation kinetics of perchlorate by Proteus sp. LMNCRE in a batch reactor system”, International Journal of Environment and Sustainable Development”, 2016 Vol.15, Pg.No.254-263

160. Viswanathan, T.S., Srinivasan, K., Sairam,V., Giriraj, M. ” Influence of temperature on behaviour of concrete”, Journal of Chemical and Pharamaceutical Sciences”, 2016 Vol.3, Pg.No.97-100

161. Saravanan, S.S., & Jagadeesh, P. “Experimental investigation strength properties of M50 Grade concrete with replacement of fine aggregate with M-Sand - A comparative study using with and without admixtures”, International journal of innovative technology and exploring engineering”, 2016 Vol.6, Pg.No.20-24

162. Burugula Subrahmanya Prasanth and Simon, J., “Study on Behaviour of Asymmetric Building with Different Column Sections under Seismic Loading”, Indian Journal of Science and Technology”, 2016 Vol.9, Pg.No.1-5

163. Chiranjeevi, M.D., Simon, J. “Analysis of Reinforced Concrete 3d Frame under Blast Loading and Check for Progressive Collapse”, Indian Journal of Science and Technology”, 2016 Vol.9, Pg.No.1-6

164. Singh, Y., John, B., Ganapathy, G.P., George, A., Harisanth, S., Divyalakshmi, K.S., Kesavan, S. “Geomorphic observations from southwestern terminus of palghat Gap, south India and their tectonic implications”, Journal of Earth System Science”, 2016 Vol.125, Pg.No.821-829

165. Suresh, S., Sinha, D., Murugavelh, S. “Biodiesel production from waste cotton seed oil: engine performance and emission characteristics”, Biofuels”, 2016 Vol.7, Pg.No.689-698

166. Simha, P., Banwasi, P., Mathew, M., Ganesapillai, M. “Adsorptive Resource Recovery from Human Urine: System Design, Parametric Considerations and Response Surface Optimization”, Procedia Engineering”, 2016 Vol. 148, Pg.No.779-786

167. Ganesapillai, M., Manara, P., Zabaniotou, A. “Effect of microwave pretreatment on pyrolysis of crude glycerol-olive kernel alternative fuels”, Energy Conversion and Management”, 2016 Vol.110, Pg.No.287-295

168. Chemat, F., Gnanasundaram, N., Shariff, A.M., Murugesan, T. “Effect of L-arginine on Solubility of CO2 in Choline Chloride + Glycerol Based Deep Eutectic Solvents”, Procedia Engineering”, 2016 Vol.148, Pg.No.236-242

169. Muruganandam, L., Ranjitha, J., Harshavardhan, A. “A review report on physical and mechanical properties of particle boards from organic waste”, International Journal of ChemTech Research”, 2016 Vol.9, Pg.No.64-72

170. Gnanasundaram, N., Singh, A., Ganesapillai, M. “Adsorption of Ni++ ions from aqueous solution onto microwave irradiated Sterculia foetida fruit shells”, Management of Environmental Quality”, 2016 Vol.27, Pg.No.59-70

2015

1. M. Mohan, A.S Santhi and G Mohan Ganesh “Experimental investigation of flat slabs against punching shear,” International Journal of applied Engineering research Vol. 10, No. 93, pp. 1–4, 2015.

2. S. Elayaraja, S. S. Chandrasekaran, and G. P. Ganapathy, “Evaluation of seismic hazard and potential of earthquake-induced landslides of the Nilgiris, India,” Nat. Hazards, Vol. 78, No. 3, pp. 1997–2015, 2015.

3. S. Abinandan and S. Shanthakumar, “Challenges and opportunities in application of microalgae (Chlorophyta) for wastewater treatment: A review,” Renew. Sustain. Energy Rev., Vol. 52, pp. 123–132, 2015.

4. G. Kesavan and S. S. Chandrasekaran, “Factors Influencing the Behaviour of Flexible Pile Groups Under Lateral Loading in Soft Clay,” Indian Geotech. J., Vol. 46, No. 2, pp. 141–151, 2016.

5. A. Pappu, V. Patil, S. Jain, A. Mahindrakar, R. Haque, and V. K. Thakur, “Advances in industrial prospective of cellulosic macromolecules enriched banana biofibre resources: A review,” Int. J. Biol. Macromol., Vol. 79, pp. 449–458, 2015.

6. S. Chowdhury, M. Mishra, and O. Suganya, “The incorporation of wood waste ash as a partial cement replacement material for making structural grade concrete: An overview,” Ain Shams Eng. J., Vol. 6, No. 2, pp. 429–437, 2015.

7. S. Chowdhury, A. Maniar, and O. M. Suganya, “Strength development in concrete with wood ash blended cement and use of soft computing models to predict strength parameters,” J. Adv. Res., Vol. 6, No. 6, pp. 907–913, 2015.

8. B. Lekshmi, R. S. Joseph, A. Jose, S. Abinandan, and S. Shanthakumar, “Studies on reduction of inorganic pollutants from wastewater by Chlorella pyreNoidosa and Scenedesmus abundans,” Alexandria Eng. J., Vol. 54, No. 4, pp. 1291–1296, 2015.

9. S. Thirumalini, R. Ravi, S. K. Sekar, and M. Nambirajan, “Knowing from the past - Ingredients and Technology of ancient mortar used in Vadakumnathan temple, Tirussur, Kerala, India,” J. Build. Eng., Vol. 4, pp. 101–112, 2015.

10. A. Sofi and B.R. Phanikumar, “An experimental investigation on flexural behaviour of fibre-reinforced pond ash-modified concrete,” Ain Shams Engineering Journal, Vol. 6, pp. 1133-1142, 2015.

11. S. Vilvanathan and S. Shanthakumar, “Biosorption of Co(II) ions from aqueous solution using Chrysanthemum indicum: Kinetics, equilibrium and thermodynamics,” Process Saf. Environ. Prot., Vol. 96, No. 2, pp. 98–110, 2015.

12. B. R. Phanikumar and M. Muthukumar, “Shrinkage behaviour of GPA-reinforced expansive clay beds subjected to swell-shrink cycles,” Geotech. Geoengin., Vol. 33, pp. 475–485, 2015.

13. B. R. Phanikumar and M. Muthukumar, “Swelling behaviour of GPA-reinforced expansive clay beds subjected to swell-shrink cycles,” Geomech. Geoengin., Vol. 10, No. 4, pp. 261–270, 2015.

14. S. V. Kumar and L. Vanajakshi, “Short-term traffic flow prediction using seasonal ARIMA model with limited input data,” Eur. Transp. Res. Rev., Vol. 7, No. 3, pp. 1–9, 2015.

15. M. Premkumar and S. Shanthakumar, “Process optimization for Cr(VI) removal by Mangifera Indica seed powder: a response surface methodology approach,” Desalin. Water Treat., Vol. 53, No. 6, pp. 1653–1663, 2015.

16. J. Umamaheswa, R. Anjali, S. Abinandan, S. Shanthakum, G. P. Ganapathy, and M. Kirubakara, “Assessment of Groundwater Quality Using GIS and Statistical Approaches,” Asian J. Earth Sci., Vol. 8, No. 4, pp. 97–113, 2015.

17. G.P. Ganapathy, Ajay S. Rajawat, “Use of hazard and vulnerability maps for landslide planning scenarios: a case study of the Nilgiris, India,” Nat Hazards, Vol. 77, pp. 305–316, 2015.

18. S. Abinandan, R. Bhattacharya, and S. Shanthakumar, “Efficacy of Chlorella pyreNoidosa and Scenedesmus abundans for Nutrient Removal in Rice Mill Effluent (Paddy Soaked Water),” Int. J. Phytoremediation, Vol. 17, No. 4, pp. 377–381, 2015.

19. R. Ravi, T. Selvaraj, and S. K. Sekar, “Characterization of Hydraulic Lime Mortar Containing Opuntia ficus-indica as a Bio-Admixture for Restoration Applications,” Int. J. Archit. Herit., Vol. 10, No. 6, pp. 714–725, 2015.

20. M. Premkumar, S. Abinandan, V. Sowmya, and S. Shanthakumar, “Efficacy of Eleusine coracana (L.) Gaertn (Ragi) Husk for Adsorption of Chromium(VI): A Study Using Response Surface Methodology”, Environmental Progress & Sustainable Energy, Vol.34, No.1, pp. 1-7, 2015.

21. G. Vijayaraghavan and S. Shanthakumar, “Removal of Sulphur Black Dye from its Aqueous Solution Using Alginate from Sargassum sp. (Brown Algae) as a Coagulant,” Environmental Progress & Sustainable Energy, Vol.34, No.5, pp. 281-287,2015

22. G. Vijayaraghavan and S. Shanthakumar, “Efficacy of alginate extracted from marine brown algae (sargassum sp.) as a coagulant for removal of direct blue2 dye from aqueous solution,” Glob. Nest J., Vol. 17, No. 4, pp. 716–726, 2015.

23. S. Thirumalini, S. K. Sekar, B. Bhuvaneshwari, and N. R. Iyer, “Bio-iNorganic composites as repair mortar for heritage structures,” J. Struct. Eng., Vol. 42, No. 4, pp. 294–304, 2015.

24. W. Bengal, “L-moment and composite model approaches for regional flood frequency analysis Kiran Yarrakula Biswajit Samanta and Debasis Deb,” Vol. 5, No. 2, 2015.

25. P. R. M. Rao and H. S. Rao, “Studies of Chloride penetration of Polypropylene fiber fly ash concrete,”International Journal of chemical science, Vol. 13, No. 1, pp. 31–37, 2015.

26. P. Gupta, S. Roy, and A. B. Mahindrakar, “Treatment of groundwater using phytoremediation technique at Kolar Gold Fields, India,” Int. J. Environ. Eng., Vol. 7, No. 1, p. 11, 2015.

27. B. Srimuruganandam and S. M. S. Nagendra, “ANN-based PM prediction model for assessing the concentrations at an urban roadway,” Int. J. Environ. Eng., Vol. 7, No. 1, pp. 60–89, 2015.

28. N. Philip and Neeraja, “Study on compressive strength of mineral admixtures and fibers to develop high performance concrete,” Int. J. Appl. Eng. Res., Vol. 10, No. 14, pp. 34612–34617, 2015.

29. S. Abinandan and S. Shanthakum, “Optimization of Process Parameters for CO2 Fixation from Bicarbonate Source by a Microalgae,” J. Environ. Sci. Technol., Vol. 8, No. 6, pp. 289–299, 2015.

30. J. S. Pillai, B. N. A. N, and B. S. Smbs, “Subsurface Flow Constructed Wetlands : Review of Applications and Recent Developments,” Vol. 34, No. 4, pp. 745–755, 2015.

31. G. M. Ganesh, A. S. Santhi, A. Elumalai, and K. Gurumurthy, “Experimental investigation of bacterial concrete to improve compressive strength: A microbiology and civil engineering approach,” Indian Concr. J., Vol. 89, No. 6, pp. 24–30, 2015.

32. S. Kasliwal, “Behaviour of high rise building under different patterns of bracing,” International Journal of Applied Engineering Research , Vol. 10, No. 93, pp. 178–182, 2015.

33. A. Dhamodharan, S. Shanthakumar, and G. P. Ganapathy, “Assessment of seasonal disparity on hydrogeochemical facies distribution in Cooum river, India,” Asian J. Earth Sci., Vol. 9, No. 1, pp. 27–35, 2015.

34. P. Danish, T. Nadu, and T. Nadu, “Study on Self Compacting Concrete ,” International Journal of Applied Engineering Research , Vol. 10, No. 93, pp. 74–78, 2015.

35. Mohan Ganesh G. Junaid Nabi, “Composite steel-concrete columns Experimental Investigation by varying Number of Struts and Type of Encasing,” International Journal of Applied Engineering Research,  Vol. 10, No. 93, pp.79, 2015.

36. M. Ganesh, “Micro-steel fibre reinforced Self -compacting concrete,” International Journal of Applied Engineering Research,  Vol. 10, No. 93, pp. 66–73, 2015.

37. S. Balaji, A.S. Shanti, G. Mohan Ganesh, “Mechanical properties of steel fibre reinforced concrete with partial replacement of fly ash and micro silica,” International Journal of Applied Engineering Research ,Vol. 10, No. 93, pp. 61–65, 2015.

38. C. M. Varghese, A.S. Shanti, G. Mohan Ganesh, “Study on the properties of polypropylene fibre reinforced concrete,” International Journal of Applied Engineering Research, Vol. 10, No. 93, pp. 56–60, 2015.

39. P. Sai, A.S. Shanti, G. Mohan Ganesh, “Self compacting concrete blended with Fly ash exposed to elevated temperatures,” International Journal of Applied Engineering Research , Vol. 10, No. 93, pp. 50–55, 2015.

40. P. Sukumar, A.S. Shanti, G. Mohan Ganesh, “Utilization of Bottom Ash in SCC as Fine Aggregate,” International Journal of Applied Engineering Research , Vol. 10, No. 93, pp. 39–43, 2015.

41. B. Gagrani, A. S. Santhi, and G. M. Ganesh, “Time History Analysis of Flat Plate Multi- Storey Frame System under Earthquake Load,” International Journal of Applied Engineering Research, Vol. 10, No. 93, pp. 27–32, 2015.

42. S. Madeena I. Shah, G. M. Ganesh, and A. S. Santhi, “Behaviour of self-compacting concrete using micro steel fibre,” International Journal of Applied Engineering Research, Vol. 10, No. 93, pp. 22–26, 2015.

43. N. A. Nair, A. Shanti, G. Mohan Ganesh, “Corrosion resistant Concrete using supplementary cementitious materials,” International Journal of Applied Engineering Research , Vol. 10, No. 93, pp. 5–9, 2015.

44. K. Akruth, A. Shanti, G. Mohan Ganesh, “Behaviour of precast concrete wall panels,” International Journal of Applied Engineering Research, Vol. 10, No. 93, pp. 10–14, 2015.

45. M. Devda, A.S. Shanti, G. Mohan Ganesh, “Mechanical Behavior of Self Compacting Concrete as a Partial Replacement of Fine Aggregate with Quarry Dust and Marble Powder,” International Journal of Applied Engineering Research,  Vol. 10, No. 93, pp. 15–21, 2015.

46. K. Pavan Kumar, D. K. Barik, and C. Manideep, “A Comparative Study of Storm Water Drainage Methods for Urban Storm Water Management,” Indian J. Sci. Technol., Vol. 8, No. 33, 2015.

47. P. Jagadeesh and S. Agrawal, “Investigation of trends and its magnitude by Non-parameteric Mann-Kendall and Sen’s slope methods,” Int. J. Hyd. Sci. Tech., Vol. 5, No. 1,pp. 83-93, 2015.

48. K. Srinivasan, A.S. Shanti, G. Mohan Ganesh, “Prediction of Compressive Strength of the Fibre Reinforced Slag Geopolymer Concrete Prediction of Compressive Strength of the Fibre Reinforced Slag Geopolymer Concrete,” International Journal of Applied Engineering Research, Vol. 10, No.1, pp. 6–7, 2015.

49. G. Kesavan and S. S. Chandrasekaran, “Geotechnical Investigation, Field Load Test and Analysis of Full-Scale Bored Pile,” Appl. Mech. Mater., Vol. 813–814, pp. 1126–1130, 2015.

50. G. Kesavan and S. S. Chandrasekaran, “Experimental investigations on lateral behaviour of pile groups in sand,” Disaster Advances, Vol. 8, No. 4, pp. 15–28, 2015.

51. S. S. Saravanan,P. Jagdesh, “Analysis of Mechanical Properties of M40 Concrete with Replacement of Fine Aggregates by Manufactured Sand- An Application Based Concrete Mix,”Int. J. Tech., Vol. 5, No. 2, pp. 10–14, 2015.

52. N. Vivek, N. Nandakumar, B. Sachin, and M. Hareesh, “Remedial Measures for Continuous Slabs against Vibration : A Case Study,” Int. J. Tech., Vol. 5, No. 2, pp. 77–85, 2015.

53. D. Banerjee,P. Jagdesh, P. Ram Mohan Rao, “A review of system dynamic model for risk assessment in construction of megaprojects in India,” Int. J. Tech.,  Vol. 5, No. 2, pp. 86–90, 2015.

54. J. Chukki and S. Shanthakumar, “Removal of malachite green and safranin dye from aqueous solution by adsorption using banana peduncle,” Indian J. Environ. Prot., Vol. 35, No. 4, pp. 322–328, 2015.

55. J. Vikram, S.K.Sekar “Synergistic Interaction of polypropylene on steel fibers in a slag based concrete matrix”, Materials, 2015.

56. M. Muthukumar, S.K Sekar, “Study on improving the performance of geosynthetic encased stone columns: numerical evaluation,” Discovery, The International Daily Journal Vol. 40, pp. 13–19, 2015.

57. A. Sharma, A. Prabhakar, P. K. Garg,M. Muthukumar, S. K. Sekar, “Shrinkage behaviour of expansive clays stabilized using vermiculite,” Discovery, The international Daily Journal, Vol. 40, pp. 274–278, 2015.

58. J. Vikram and S. K. Sekar, “Enhancement of Concrete Sustainability under Temperature Variation using Hybrid Fibre Reinforcement,” Indian J. Sci. Technol., Vol. 8, No. 28, 2015.

59. E. L. Harish, S. Karthikeyan, and S. K. Sekar, “Corrosion inhibition of reinforcing steel in simulated concrete pore solution- An ecofriendly approach,” Int. J. ChemTech Res., Vol. 7, No. 4, pp. 2003–2006, 2015.

60. Y. Mishra, V. Sowmya, and S. Shanthakumar, “Adsorption studies of basic dyes onto teak (Tectona grandis) leaf powder,” J. Urban Environ. Eng., Vol. 9, No. 2, pp. 102–108, 2015.

61. G. Vijayaraghavan and S. Shanthakumar, “Efficacy of Moringa oleifera and Phaseolus vulgaris (common bean) as coagulants for the removal of Congo red dye from aqueous solution,” J. Mater. Environ. Sci, Vol. 6, No. 6, pp. 1672–1677, 2015.

62. J. Vikram, S.K. Sekar, Comparative assessment of impact toughness behaviour of hybrid fibre reinforced concrete, International Journal of Civil and Structural Engineering, Vol.2, No. 2, 2015.

63. S. Thirumurugan,S.K. Sekar, Rate of Chloride Penetration In Polymer Modified Concrete Embedded With Crimped Polypropylene Fibres, International Journal of Applied Engineering Research, Vol.23, pp. 43659-43662,2015.

64. J Vikram, S.K.Sekar, “Interaction effect of composite fibres in a carefully designed slag based concrete matrix”, International Journal of Applied Engineering Research, Vol. 10 , No. 19, pp. 40371-40378, 2015.

65. Nivin Philip, Neerja, Strength And Permeability Of High Strength Concrete With Polypropylene Fibre, International Journal of Civil Engineering, Vol. 4, No. 4, Pp. 11-20,2015.

66. Om Suganya, S.K. Sekar, Study on compressive strength of mineral admixtures and fibers to develop high performance concrete, International Journal of Applied Engineering Research,Vol.10, No.17, pp. 38536-38542, 2015.

67. R. Gobinath, G.P. Ganapathy, I.I. Akinwumi, Evaluating the use of lemon grass root for the reinforcement of a landslide affected soil from Nilgris district, Tamil Nadu, India, J. Mater. Environ Sci. Vol. 6, No. 10, pp 2681-2687, 2015.

68. Gobinath R, G P Ganapathy, Kovendiran, Hema, Thangaraj, Lokeshkumar, Yogeshwaran, Divya Priya,”Studies On Hydraulic Charaterisitics Of Black Cotton Soil By Using Precipitated Silica As Stabilizing Agent”, International Journal of Earth science and Engineering,Vol.8, No.3,pp. 1514-1519,2015.

69. Gobinath R, G P Ganapathy,Raja, Prakash Raja, Prashant Raja, Ponnandakumar Raja,” Studies on Soil-Root Stabilization for slope Protection- A Study Using some Grass Varieties from Nilgris District”, International Journal of Earth science and Engineering, Vol. 8, No. 3, pp. 1526-1531, 2015.

70. R.Gopinath, S.P.Saravanan, V.Vijayan, S.Muthukumar, M.Muthuseenivasan, V.Muthuraj, and V.Prabu, “Experimental studies on soil stabilization using vetiver root as reinforcement”, International Journal of Applied  Engineering Research, Vol. 10, No.53, pp. 286-290, 2015.

71. A. Dhamodharan, S. Shanthakumar and G.P. Ganapathy “Assessment of seasonal disparity on hydrogeochemical facies distribution in cooumriver, india”, Asian Journal of Earth Sciences, Vol. 9, No.1, pp. 27-35, 2015.

72. S. Telang, A.S. Santhi, G. Mohan Ganesh, “Behavior of steel fibre reinforced concrete under elevated temperature”, Internation Journal of Applied  Engineering Research, Vol. 10, No.93, pp. 172-177, 2015.

73. G. Mohan Ganesh, P. Sumanth, “Seismic Resist of Steel- Concrete Composite Structures”, International Journal of Applied  Engineering Research, Vol. 10, No.93, pp. 121-124, 2015.

74. V. Monoharan, P. Porchelvan, S.K. Sekar,” Removal of Heavy Metals from lignite Mine-spoil Using Electro Kinetic Remediation”, International Journal of Applied  Engineering Research, Vol. 10, No. 53, pp. 14-18, 2015.

75. S. S. Saravanan and P. Jagadeesh “Assessment of compressive strength of M40 Concrete with manufactured sand- An application based concrete mix”, ARPN Journal Of Engineering and Applied Sciences, Vol. 10, No. 16, pp. 7243- 7249, 2015.

76. Uma Shankar, B.R. Phanikumar,“ Leachate studies on Fly ash-stabilised expansive clay liners”, Geomechanics and Geo-engineering An International Journal, Vol.11 No. 2, pp. 114-118, 2015. 

77. A Arun Kumar, A.S. Santhi, G. Mohan Ganesh, “Strength and Durability of Green Concrete”, International Journal of Structural Engineering, Vol. 6, No. 1, pp. 23-32, 2015.

78. DV Ramana, MV Ramanaiah, SKK Babu, VS Kumar, K Yarrakula “An Alternative Procedure For Average Outcoing Quality Limit: A Linear Trend Approach”, Journal of recent research in Engineering and Technology, Vol. 2, No. 4, pp. 152-162, 2015.

79. K. Ayeratha Rasurajasekharan, P. Porchelvan “A Review on Life Cycle Energy Analysis of Buildings- Methods and Scenario,” Int. J. Innov. Eng. Technol., Vol. 6, No. 2, pp. 307–311, 2015.

80. G. Ganapathy, S. Karanam, S. S. Chandrasekaran and M. S. Ganesh, “Liquefaction Potential Susceptibility Mapping In Urban Areas,” Int. J. Adv. Mech. Civ. Eng., Vol. 2, No. 1, pp. 2394–2827, 2015.

81. M. Kumar, D. Neeraja, and K. M. Vishwanath, “Design and Analysis of Seawall,” Int. J. Eng. Res. Technol., Vol. 4, No. 4, pp. 1402–1406, 2015.

82. V.S. Barath, p. Rama Mohan Rao, “Study on the Fibre Reinforced concrete using steel slag as a course aggregate replacement”, Int. J. Tech. Res. Engg., Vol. 2, No. 7, pp. 1322-1326, 2015.

83. T. S. R. Babu, G. Omkar, D. Neeraja and D. Nirosha, “Strength Properties of Concrete With Partial Replacement of Fine Aggregate By Scrap Tyre,” Int. J. Eng. Res., Vol. 3, No. 1, pp. 196–202, 2015.

84. Rajkumar, Balagopal, and Visuvasam, “Damage Detection Studies on Transmission Tower,” Int. J. Technol. Res. Eng., Vol. 2, No. 8, pp. 1614–1618, 2015.

85. K. Srinivasan, S. Kumar, and R. Vaishnave, “Thermally Induced Dynamics on Spacecraft,” Int. J. Technol. Res. Eng., Vol. 2, No. 7, pp. 1309–1315, 2015.

86. A. A. Nalkara and M. Hareesh, “Numerical Investigation on Cold-Formed Steel Lipped Channel Columns Affected By Interaction Mode Failure,” Int. J. Sci. Innov. Eng. Technol., Vol. 2, No.5, pp. 1–5, 2015.

87. S. Jabiulla and D. Neeraja, “Performance Evaluation of Metakaolin and Flyash Based Geo-Polymer Concrete,” Int. J. Technol. Res. Eng., Vol. 2, No. 7, pp. 1309–1312, 2015.

88. G. M. Girish, S. M. Iyer, and D. Neeraja, “Parametric Study on Behavior of Concrete Shell Under Uniform Loading,” Int. J. Eng. Res. Technol., Vol. 4, No. 3, pp. 765–769, 2015.

89. A. Sofi, A. Saxena, P. Agrawal, A. R. Sharma, and K. Sharma, “Strength Predictions of Saw Dust and Steel Fibres In Concrete,” Nternational J. Innov. Res. Sci. Eng. Technol., Vol. 4, No. 12, pp. 12473–12477, 2015.

90. Sofi, G. Sharma, and S. Kumar, “An Experimental Investigation on The Modulus of Elasticity of Fiber Reinforced Concrete Containing Fly Ash Mixture Composition and,” Yanbu J. Eng. Sci., Vol. 10, pp. 58–63, 2015.

91. K. P. Kumar and D. K. Barik, “Comparison of Agricultural Yield With and Without A Canal Head Regulator,” Int. J. Adv. Technol. Eng. Sci., Vol. 3, pp. 19–30, 2015.

92. N. Shireesha, S. B. Murugan, and G. N. Kumar, “Experimental Studies on Steel Fiber Reinforced Concrete,” Int. J. Sci. Res., Vol. 4, No. 9, pp. 598–602, 2015.

93. Suryateja and N. D, “Prediction of Mechanical Properties of Concrete Using Admixtures and With Different Curing Conditions,” Int. J. Technol. Res. Eng., Vol. 2, No. 7, pp. 1313–1317, 2015.

94. Ravi Chandra and D. Neeraja, “Experimental Analysis of A Hybrid Beam Using GFRP and Steel Reinforcement Bars,” Int. J. Technol. Res. Eng., Vol. 2, No. 7, pp. 1361–1365, 2015.

95. Ramesh and Neeraja, “Experimental Studies on Effect of Different Fibers on The Behaviour of Structural Component,” Int. J. Adv. Technol. Eng. Sci., Vol. 3,No. 1, pp. 664–674, 2015.

96. Giridhar and P. R. M. Rao, “Determination of Mechanical Properties of Slurry Infiltrated Concrete (Sifcon),” Int. J. Technol. Res. Eng., Vol. 2, No. 7, pp. 1366–1368, 2015.

97. V. Tekchandani, A. Aggarwal, and P. R. M. Rao, “Mechanical Properties of Steel Fiber Reinforced Concrete Using Recycled Aggregate,” Int. J. Technol., Vol. 5, No. 2, pp. 215–218, 2015.

98. M. S. Kumar and P. R. M. Rao, “Strength Properties of Ternary Blended Fiber Reinforced Concrete,” Int. J. Technol. Res. Eng., Vol. 2, No. 7, pp. 1318–1321, 2015.

99. P. G. R. V Sarath and R. M. Rao, “Retrofitting of Rc Beam Elements Using Fibre Reinforced Polymer ( FRP ) Mats,” Int. J. Technol. Res. Eng., Vol. 2, No. 7, pp. 1327–1330, 2015.

100. P. S. Reddy and R. M. Rao, “Study on Properties of Recycled Aggregate Concrete With Hybrid Fibres At Low Volume Fractions,” Int. J. Technol. Res. Eng., Vol. 2, No. 7, pp. 1304–1308, 2015.

101. T. Shanmugapriya, “Flexural Behaviour of Reinforced High Performance Concrete Beams With Manufactured Sand and Silica Fume,” Int. J. Innov. Res. Eng. Manag., No. 1, pp. 5–10, 2015.

102. Gobinath and Ganapathy, “Evaluation of Soil Reinforcement Potential of Grass Variety,” Int. J. Geol. Geotech. Eng., Vol. 1, No. 1, pp. 14–18, 2015.

103. G. Ravindran and G. P. Ganapathy, “Stabilization of Red Soil By Using Boiler Feed Ash,” Int. J. Geol. Geotech. Eng., Vol. 1, No. 1, pp. 9–13, 2015.

104. P. . Kavitha and G. . Ganapathy, “Removal of Solids From The Tannery Effluent By A Suitable Technology: A Case Study-Vellore District, Tamil Nadu, India,” J. Ind. Pollut. Control, Vol. 31, No. 1, pp. 1–7, 2016.

105. P. R. Kavitha and G. P. Ganapathy, “Tannery Process And Its Environmental Impacts A Case Study : Vellore District , Tamil Nadu, India,” J. Chem. Pharm. Sci., Vol. 8, No. 4, pp. 759–764, 2015.

106. S. Parimalarenganayaki, K. Brindha, K. Sankaran, and L. Elango, “Effect of recharge from a check dam and river bank filtration on geochemical and microbial composition of groundwater,” Arab J Geosci, Vol. 15, pp. 1825–4, 2015.

107. T. Shanmugapriya, R. N. Uma, “Strength and Durability Studies on High Performance Concrete With Manufactured Sand As Fine Aggregate,” Int. J. Appl. Eng. Res., Vol. 10, No. 2, pp. 1919–1924, 2015.
 

108. Alreja, J., Parab, S., Mathur, S., Samui, P. “Estimating hysteretic energy demand in steel moment resisting frames using multivariate adaptive regression spline and least square support vector machine”, Ain Shams Engineering Journal, 2015 Vol. 6, Pg.No. 449-458.

109. Meena, T. “Effect Of Impregnation of Steel & Glass Fibre in Self Compacting Concrete”, International Journal on Concurrent Applied Research in Engineering and Management, 2015 Vol. 1, Pg.No. 1-4.

110. Viswanathan ,R., Kurup, P., Samui, P. “Examining Efficacy of Metamodels in predicting Ground Water Table” , International Journal of Performability Engineering, 2015 Vol. 11, Pg.No. 295-281.

111. Ganesapillai, M., Singh ,A., Subba Rao, B., De D., Juneja, U. “Extraction of alkaloids from microwave dried Adathoda vasica leaves - A comparative study”, International Journal of Pharma and Bio Sciences , 2015 Vol. 6, Pg.No.121-139.

112. Ganesapillai, M., Venugopal, A., Ananthkrishna, V., Tapankrishna, N. “Influence of process parameters on sorption capacity of microwave activated biosorbents for urea recovery from human urine: A comparative study”, Asia-Pacific Journal of Chemical Engineering, 2015 Vol. 10, Pg.No.438-449.

113. Raghavan, K., Mandla, V.R., Franco, S. “Influence of urban areas on environment: Special reference to building materials and temperature anomalies using geospatial technology”, Sustainable Cities and Society, 2015 Vol. 19, Pg.No.349-358.

114. Kumar, S., Venkatesh Reddy, Ch., Mandla, V.R., Chaithanya Sudha, M., Shanawaz, S.M. “Integrated water and waste water management for a township”, Journal of Industrial Pollution Control, 2015 Vol. 31, Pg.No.163-174.

115. Samui, P., Kim, D., Hariharan, R. “Determination of seismic liquefaction potential of soil based on strain energy concept”, Environmental Earth Sciences, 2015 Vol. 74, Pg.No.5581-5585.

116. Pavan Kumar, K., Barik, D. K. “Comparison of Agricultural Yield with and without a Canal Head Regulator”, International Journal of Advanced Technology in Engineering and Sciences, 2015 Vol. 3, Pg.No. 19-30.

117. Rahaman, A., Rahim, A., Pyare, R. “Effect of P2O5 content on the physical and biological properties of SiO2-Al2O3-CaO-Na2O bio-glass ceramics”, International Journal of Applied Engineering Research, 2015 Vol. 10, Pg.No.33287-33290.

118. Chitra, D., Muruganandam, L. “Effect of impeller blade width on critical impeller speed in a flat-bottomed agitated vessel”, International Journal of Applied Engineering Research, 2015 Vol. 10, Pg.No.42091-42098.

119. Franco, S., Kumar, P., Mandla, V.R., Rao, K.R.M. “Urban growth simulation for an emerging Indian megacity using cellular automata”, International Journal of Earth Sciences and Engineering, 2015 Vol.8, Pg.No. 376-381.

120. Samui, P., Kim, D. “Determination of the Angle of Shearing Resistance of Soils Using Multivariate Adaptive Regression Spline”, Marine Georesources and Geotechnology”, 2015 Vol. 33, Pg.No.542-545.

121. Raghavendra, D.S., Sivakumar, A. “Compressive strength index of different types of light weight plastic aggregate concrete”, Indian Journal of Science and Technology”, 2015 Vol. 8 Pg.No. 106-111.

122. Ganesapillai, M., Simha, P., Zabaniotou, A. “Closed-loop fertility cycle: Realizing sustainability in sanitation and agricultural production through the design and implementation of nutrient recovery systems for human urine”, Sustainable Production and Consumption, 2015 Vol. 4 Pg.No.36-46.

123. Srinivasan K., Sivakumar A “Chemical activation and curing regime of geopolymer concretes” Proceedings of Institution of Civil Engineers: Construction Materials, 2015, Vol. 168, No. 1, pp. 24-34.

124. Kothari, K., Shah, A.B., Murugavelh, S. “Bio oil production:Pyrolysis of saw dust in an auger reactor”, International Journal of ChemTech Research, 2015 Vol. 8,Pg.No. 349-357.

125. Samui, P., Hariharan, R. “A unified classification model for modeling of seismic liquefaction potential of soil based on CPT”, Journal of Advanced Research, 2015 Vol. 6, Pg.No.587-592.

126. Velu, S., Muruganandam, L., Arthanareeswaran, G. “Preparation and performance studies on polyethersulfone ultrafiltration membranes modified with gelatin for treatment of tannery and distillery wastewater”, Brazilian Journal of Chemical Engineering, 2015 Vol. 32, Pg.No. 179-189.

127. Banerjee debalina., Jagadeesh, p., Rao rama mohana, p. “A review of system dynamic model for risk assessment in construction of megaprojects in India”, International Journal of Technology, 2015 Vol. 5, Pg.No.86-90.

128.Mandla, V.R., Reddy, V.A., Sai Swetha, N., Gobinath, P “A regional study on estimation of crop water requirement and evapotranspiration”, International Journal of Earth Sciences and Engineering, 2015 Vol. 8, Pg.No.929-936.

129. Rama Mohan Rao, P., Siddhartha Reddy, P. “Study on Properties of Recycled Aggregate Concrete With Hybrid Fibres at Low Volume Fractions”, International Journal for Technological Research in Engineering, 2015 Vol. 2, Pg.No.1304-1308.

130. Janani, S., and Santhi, A.S. “A review on the behaviour of fibre reinforced blended cement concrete under impact resistance”, International Journal of Applied Engineering Research, 2015 Vol. 10, Pg.No. 44-49.

131.Gnanasundaram, N., Loganathan, M., Perumal, K “Solid holdup and circulation rate in a liquid-solid circulating fluidized bed with viscous liquid medium”, Brazilian Journal of Chemical Engineering, 2015 Vol. 32, Pg.No.849-856.

132. Samui, P., Kim, D., Viswanathan, R “Spatial variability of rock depth using adaptive neuro-fuzzy inference system (ANFIS) and multivariate adaptive regression spline (MARS)”, Environmental Earth Sciences, 2015 Vol. 73, Pg.No. 4265-4272.

133. Viswanathan , R., Jagan, J., Samui, P., Porchelvan, P “Spatial Variability of Rock Depth Using Simple Kriging, Ordinary Kriging, RVM and MPMR”, Geotechnical and Geological Engineering, 2015 Vol. 33,Pg.No.69-78.

134. Hariharan, A.R., Santhi, A.S., Mohan Ganesh, G. “Statistical model to predict the mechanical properties of binary and ternary blended concrete using regression analysis”, International Journal of Civil Engineering, 2015 Vol. 13,Pg.No.331-340.

135. Motwani, P., Rajendhiran, Santhi, A.S. “Simulation of brick infill and effect of openings on RC frames using ANSYS”, Indian Journal of Science and Technology, 2015 Vol. 8, Pg.No.29-35.

136. Kumar Reddy, M.P., Thulasi Ram Bharat, B., Babin Meshach, G., Murugavelh, S. “Purification and extraction of fatty acid methyl esters (Bio-diesel) from waste vegetable oil”, International Journal of Applied Engineering Research, 2015 Vol. 10,Pg.No.912-915.

137. Praseeda, E., John, B., Srinivasan, C., Singh, Y., Divyalakshmi, K.S., Samui, P. “Thenmala fault system, Southern India: Implication to neotectonics, 2015 Vol. 86, Pg.No.391-398.

138. Nirmala, G.S., Muruganandam, L. “An experimental study of liquid-solid flow in a circulating fluidized bed of varying liquid viscosity”, Journal of Applied Fluid Mechanics, 2015 Vol. 8, Pg.No.95-101.

2014

1. R. K. Srivastav and S. P. Simonovic, “An analytical procedure for multi-site, multi-season stream flow generation using maximum entropy bootstrapping,” Environ. Model. Softw., Vol. 59, No. 3, pp. 59–75, 2014.

2. R. K. Srivastav and P. Simonovic, “Multi-site, multivariate weather generator using maximum entropy bootstrap,” Climate Dynamics, doi:10.1007/s00382-014-2157-x, pp.1-19, 2014.

3. R. K. Srivastav, A. Schardong, and S. P. Simonovic, “Equidistance Quantile Matching Method for Updating IDF Curves under Climate Change,” Water Resource Management, Vol. 28, No.9, pp 2539–2562, 2014.

4.S. Parimalarenganayaki and L. Elango, “Assessment of effect of recharge from a check dam as a method of Managed Aquifer Recharge by hydrogeological investigations,” Environ. Earth Sci., Vol. 73, No. 9, pp. 5349–5361, 2014.

5.C. Sprenger, S. Parimala Renganayaki, M. Schneider, and L. Elango, “Hydrochemistry and stable isotopes during salinity ingress and refreshment in surface- and groundwater from the Arani–Koratallai (A–K) basin north of Chennai (India),” Environ. Earth Sci., Vol. 73, No. 12, pp. 7769–7780, 2014.

6.Andre Schardong; Roshan K. Srivastav “Atualização da equação intensidade-duração-frequência para a cidade de são paulo sob efeito de mudanças climáticas” RBRH – Revista Brasileira de Recursos Hídricos, Vol. 19 No. 4, pp. 176-185, 2014.

7. N. Brunner et al., “Policy preferences about managed aquifer recharge for securing sustainable water supply to Chennai City, India,” Water (Switzerland), Vol. 6, No. 12, pp. 3739–3757, 2014. 

8. P. Yuvaraj, A. Ramachandra Murthy, N. R. Iyer, S. K. Sekar, and P. Samui, “Prediction of fracture characteristics of high strength and ultra high strength concrete beams based on relevance vector machine,” Eng. Fract. Mech., Vol. 98, No. 1, pp. 29–43, 2014.

9. T. Shanmugapriya and R. N. Uma, “Environmental Friendly Silica Fume Based High Performance Concrete With M-Sand,” Vol. 33, No. 1, pp. 223–227, 2014.

10. T. Shanmugapriya, R. N. Uma, and C. Meiaraj, “Influence of manufactured sand as fine aggregate on strength properties of high performance concrete,” Int. J. Earth Sci. Eng., Vol. 7, No. 4, pp. 44-51, 2014.

11. S. Chowdhury, S. Roy, A. T. Maniar, and O. Suganya, “Comparison of Mechanical Properties of Mortar Containing Industrial Byproduct,” APCBEE Procedia, Vol. 9, pp. 317–322, 2014.

12. S. Vasantha Kumar and L. Vanajakshi, “Urban Arterial Travel Time Estimation Using Buses as Probes,” Arab. J. Sci. Eng., Vol. 39, No. 11, pp. 7555–7567, 2014.

13. R. Viswanathan, J. Jagan, P. Samui, and P. Porchelvan, “Spatial Variability of Rock Depth Using Simple Kriging, Ordinary Kriging, RVM and MPMR,” Geotech. Geol. Eng., Vol. 33, No. 1, pp. 69–78, 2014.

14. S. B. Murugan, G. M. Ganesh, and A. S. Santhi, “Regression models for prediction of compressive strength of high Volume fly ash (HVFA) concrete,” Arab. J. Sci. Eng., Vol. 39, No. 3, pp. 1659–1669, 2014.

15. B. R. Phanikumar and M. Muthukumar, “Reducing heave of expansive clay beds through granular pile–anchor groups,” Proc. Inst. Civ. Eng. - Gr. Improv, Vol. 167, No. 2, pp. 99–107, 2014.

16. K. Srinivasan and A. Sivakumar, “Chemical activation and curing regime of geopolymer concretes,” Proc. Inst. Civ. Eng. Constr. Mater., Vol. 168, No. 1, pp. 1–11, 2014.

17. S. Karunanithi and S. Anandan, “Flexural toughness properties of reinforced steel fibre incorporated alkali activated slag concrete,” Adv. Civ. Eng., Vol. 2014, 2014.

18. P. Rama Mohan Rao and S. Vinothkumar, “Assessment of strength and electrical resistance of ternary blend concrete,” Int. J. ChemTech Res., Vol. 7, No. 4, pp. 2034–2040, 2014.

19. P. J. P. Rama Mohan Rao, P. Rama Mohan Rao, “Effect Of Treated Waste Water On The Properties Of Hardened Concrete,” Int. J. Chem. Sci. Vol. 12, No.1,pp. 155-162, 2014.

20. Bhaireve Ganesh Aiyer, Dookie Kim, Nitin Karingattikal, Pijush Samul,  P Rama Mohan Rao “Prediction of compressive strength of Self compacted concrete using least Square support vector machine and relevance vector machine”, KSCE J of Civil Engg. Vol 18, No.6, pp. 1753-1758, 2014.

21. Kiran Yarrakula, K S  Kumar, K Leela Krishna, “Urban Sprawl change Detection analysis of Vijayawada city using multi temoral remote sensing Data” JOCPR ,Vol 6, No.11, pp. 728-738, 2014.

22. P. Rama Mohan Rao and Y. Hemath Kumar “The Effect of GGBS on the Strength and Chloride Penetration of Concrete” Int. J. Chem. Sci.: Vol. 12, No. 3, 957-964, 2014.

23. Durga Devi Pithani , P. R. K. Prasad and Kiran Yarrakula “Studies on micronutrient status in soils of Kavali revenue division of Nellore district, Andhra Pradesh, India”,  Journal of Chemical and Pharmaceutical Research, Vol. 6, No. 9, pp. 289-294, 2014.

24. K Srinivasa Rao, G Chandra Mouli, Kiran Yarrakula, A Mani and M Madhava “Normalized Difference Vegetation Index (NDVI) Changes around Godavari River Basin in Andhra Pradesh “  The Andhra Agric .J Vol Vol. 61, No.3,  pp. 658-664, 2014.

25. Sowjanya Allam, Dr. Kiran. Yarrakula and Dr. SK. Khadar Babu “Flood Frequency Analysis of Godavari Basin” IJOO, Vol. 8, No. 1, pp. 73-79, 2014.

26. P. Yuvaraj, A. R. Murthy, N. R. Iyer, and S. K. Sekar, “ANN Model to Predict Fracture Characteristics of High Strength and Ultra High Strength Concrete Beams,” Vol. 41, No. 3, pp. 193–213, 2014.

27. P. Thirumalini and S. K. Sekar, “Effect of microbiologically induced CaCO3 precipitation by addition of kadukai and jaggery in lime mortar,” Int. J. Appl. Eng. Res., Vol. 9, No. 19, pp. 6149–6157, 2014.

28. Sekar S.K “Prediction of Compressive Strength of GGBS Concrete using Neural Network”, International Journal of Applied Engineering Research, Vol. 9, No. 21, pp. 8983-899, 2014.

29. R. Ravi and S. Sekar, “Study on Cactus extract as a hydrophobic admixture in lime mortar,” Int. J. Appl. Eng. Res., Vol. 9, No. 20, pp. 6649–6659, 2014.

30. R. Kumar, S. Abinandan, and S. Shanthakumar, “Assessment of noise quality: A study in Patna,” Indian J. Environ. Prot., Vol. 34, No. 8, pp. 653–659, 2014.

31. T. S. Viswanathan, G. M. Ganesh, and A. S. Santhi, “Investigation of Shear Stud Performance in Flat Plate Using Finite Element Analysis,” J. Eng. Technol. Sci., Vol. 46, No. 3, pp. 328–341, 2014.

32. Neeraja, D & Jagan, S & Kumar, S & Mohan, P.G. “Experimental study on strength properties of concrete by partial replacement of cement with Sugarcane Bagasse Ash.” Nature Environment and Pollution Technology. Vol. 13, pp. 629-631, 2014. 

33. J. V. Judith, R. Revathy, V. Habeeba, M. Poddar, A. N. B. Nair, and A. Ramanan, “Mapping Drinking Water Quality in Water Distribution System To Health Effects : a Case Study,”Pollution Research Paper, Vol. 33, No. 4, pp. 681–687, 2014.

34. G. Murali, A. S. Santhi, and G. M. Ganesh, “Impact Resistance And Strength Reliability Of Fiber-Reinforced Concrete In Bending Under Drop Weight Impact Load,” Int. J. Technol., vo. 2, pp. 111-120, 2014.

35. A. Kumar A., A. S. Santhi, and G. M. Ganesh, “Strength and drying shrinkage of green concrete,” Indian Concr. J., Vol. 88, No. 2, pp. 28–35, 2014.

36. G. Murali, A. S. Santhi, and G. Mohan Ganesh, “Impact resistance and strength reliability of fiber reinforced concrete using two parameter weibull distribution,” J. Eng. Appl. Sci., Vol. 9, No. 4, pp. 554–559, 2014.

37. A. R. Hariharan, A. S. Santhi, and G. M. Ganesh, “Statistical model to predict the mechanical properties of binary and ternary blended concrete using regression analysis,” Int. J. Civ. Eng., Vol. 13, No. 3, pp. 256–263, 2014.

38. Selvapandian,  K.P. Ramachandran, Dr Neeraja  “Feasibility of Using Insulated Concrete Forms In Hot And Humid Climate”  IJCIET, Vol. 5, No.1, pp. 66-72, 2014.   

39. G. Manimegalai, S. Shanthakumar, and C. Sharma, “Silver nanoparticles: synthesis and application in mineralization of pesticides using membrane support,” Int. Nano Lett., Vol. 4, No. 2, pp. 1-5, 2014.

40. Augustine Mark A. R and P. A. Sofi, “GFRP Confined Concrete Under Uni-Axial Loading,” International Journal of Engineering, Vol. 6, No. 2, pp. 72–75, 2014.

41. S. E Manikandan and P. A. Sofi, “Experimental Investigation on Fly Ash Based Self Compacting Concrete,” Int. J. Eng., Vol. 6, No.2, pp. 76-79, 2014.

42. G. Murali, A. S. Santhi, and G. Mohan Ganesh, “Empirical relationship between the impact energy and compressive strength for fiber reinforced concrete,” J. Sci. Ind. Res. (India), Vol. 73, No. 7, pp. 469–473, 2014.

43. G. Murali, A. S. Santhi, and G. Mohan Ganesh, “Effect of crimped and hooked end steel fibres on the impact resistance of concrete,” J. Appl. Sci. Eng., Vol. 17, No. 3, pp. 259–266, 2014.

44. Ganapathy G.P , Rajawat A. S “Quantification of geologic hazard and vulnerability for Chennai city, India”  International Journal of Geomatics and Geosciences ,Vol. 5, No. 1, pp. 32-42, 2014.

45. S. P. Renganayaki and L. Elango, “Mitigation of Seawater Intrusion by Managed Aquifer Recharge through Check Dams in Coastal Aquifers north of Chennai, India,” Int. Bull. Water Resour. Dev. Mitig., Vol. 1, No. 04, pp. 70–81, 2014.

46. A. Mathew, “Laboratory Electrocoagulation using Carbon Electrodes and Comparative Coagulation Studies,” International Journal of Engineering Research & Technology, Vol. 3, No. 9, pp. 518–521, 2014.

47. G. Vijayaraghavan, R. Rajasekaran, and S. K. Sekar, “Effectiveness of Hybrid Techniques ( AOP & Bio ): Simulation of Degradation of Phenolic Waste Water,” Int. J. Res. Chem. Environ., Vol. 4, No. 1, pp. 102–108, 2014.

48. K. P. Kumar, “Development And Application Of Multi objective Fuzzy Waste Load Allocation Model”, Vol. 2,  No. 9, pp. 127–138, 2014.

49. S. S. Babu and D. Neeraja, “Optimization of Energy Use Intensity in a Design-Build Framework,” International Journal of Research in Engg and Tech., Vol. 3, No. 11, pp. 91–95, 2014.

50. R. Eddy, D. N. Eeraja, and B. K. Otaiah, “An Experimental In Vestigation on Use of Secondary Aluminium Dross In Concrete”, Int. J. Appl. Sci. Eng. Manag., Vol. 3, No. 6, pp. 29–35, 2014.

51. P. Reddy, “Determination of Mechanical Properties of Recycled Aggregate Concrete With Fly Ash,” Vol. 3, No. 2, pp. 37–39, 2014.

52. G. C. Mishra, D. K. Barik, and P. G. Gaikwad, “Infiltration of Leachate From An Ash Pond Through A Liner”, International Journal of Advanced Technology in Engineering and Science, Vol. 2, No. 9, pp. 82–90, 2014.

53. S. Chand, K. Khandelwal, and D. K. Barik, “Run off Estimation by Using Low Impact Development (Lid) Approach From A Small Watershed”, International Journal of Advanced Technology in Engineering and Science,  Vol.4, No.9, pp. 342–350, 2014

54. P Rama Mohan Rao “Study on the strength properties of fly ash fibre reinforced concrete”, Int J Con Mat Res, Vol. 29, No.4, pp. 122-123, 2014.

55. A. Sivakumar, K. Srinivasan “High Performance Fibre Reinforced Alkali Activated Slag Concrete” World Academy of Science, Engineering and Technology”, International Journal of Civil, Architectural, Structural and Construction Engineering, Vol. 8, No.12, pp. 1217-1220, 2014.
56. Swaptik Chowdhury, Mihir Mishra, Ankit Sethi, OM Suganya “Study of Stabilizing Agent For Different Soil Varieties”, International Journal of Scientific & Engineering Research, Vol. 5, No. 4,pp. 259-265, 2014.
 

2013

1. M. Arthy, M. Saravanakumar, “Isotherm Modelling, Kinetic study and optimization of batch parameters for effective removal of Acid Blue 45 using tannery waste”, Journal of Molecular Liquids, Vol. 187, pp. 189-200, 2013.

2. S. Chandrasekaran, R. Sayed Owaise, S. Ashwin, R. Jain, S. Prasanth, and R Venugopalan, “Investigation on infrastructural damages by rainfall-induced landslides during November 2009 in Nilgiris, India”, Natural Hazard, Vol. 65, No. 3, pp. 1535-1557, 2013.

3. M. P. Saravanakumar, B. R. Phanikumar “Response surface modelling of Cr6+ adsorption from aqueous solutionby neem bark powder: Box–Behnken experimental approach”, Environmental Science and Pollution Research, Vol.20, pp. 1327-1343, 2013.

4. A. Sofi, K. Swathy and G. Srija, “Toughness study on fly ash based fiber reinforced concrete”, International Journal of Advanced Structural Engineering, Vol. 5, No. 17, pp. 1-4, 2013.

5. P. Jagadeesh, C. Anupama, “Statistical and trend analyses of rainfall: a case study of Bharathapuzha river basin, Kerala, India”, ISH Journal of Hydraulic Engineering, doi.10.1080/09715010.2013.843280, pp. 1-14, 2013.

6. S. Chandrasekaran, A. Boominathan and G. Dodagoudar, “Dynamic Response of Laterally LoadedPile Groups in Clay”, Journal of Earthquake Engineering, Vol. 17, pp. 33-53, 2013.

7. K. Srinivasan, A. Sivakumar, “Geo-polymer binders: A need for future concreate construction”, Polymer science, Vol. 2013, pp. 1-8, 2013.

8. K. Yarrakula, S Reddy Yekola, K. Leela Krishna, “GIS Application In Landuse Planning of Vijayawada Urban Area”, International Journal of Oceans and Oceanography, Vol. 7, No. 1, pp. 83-92, 2013.

9. K. Srinivasa Rao, K. Yarrakula, G. Chandramouli, P. Rammohan Rao, “Change Detection Analysis of Godavari River Basin In AP Using Remote Sensing”, International Journal of Applied Environmental Sciences, Vol. 8, No. 18, pp. 2253-2262, 2013.

10. P. Yuvaraj, A. Ramachandra Murthy, N Iyer, P. Samui, S.K. Sekar, “Multivariate Adaptive Regression Splines Model to Predict Fracture Characteristics of High Strength and Ultra High Strength Concrete Beams”, CMC, Vol. 36, No. 1, pp. 73-97, 2013.

11.V. Manoharan, P. Porchelvan, S.K. Sekar, “Removal of heavy metals from brown coal lignite using Electro Kinetic Method”, International Journal of Earth Sciences and Engineering, Vol. 6, No. 6, pp. 1631-1636, 2013.

12.V. M. Sountharajan, K. Srinivasan, A. Sivakumar, “Micro filler effects of silica fume on the setting and hardened properties of concreate”, Research Journal of Applied sciences, Engineering and Technology, Vol. 6, No. 14, pp. 2649-2654, 2013.

13. S. Balamurugan, G. Mohan Ganesh, A. S. Santhi, “Sustainable concreate for the construction industry,” ARPN Journal of Engineering and Applied Sciences, Vol. 8, No. 10, pp. 829 – 833, 2013.

14. A. Arun Kumar, A. S. Santhi, G. Mohan Ganesh “Performance Evaluation Of Eco Friendly Green Concrete,” Nature Environment And Pollution Technology, Vol. 12, No. 3, pp. 443 – 448, 2013.

15. T. S. Viswanathan, G. Mohan Ganesh, A. S. Santhi “Effect of Shear reinforcement on flat plate using finite element analysis,” International Journal of earth sciences and engineering, Vol. 6, No. 3, p. 558 – 562, 2013.

16. M. Poddar, S. Shanthakumar, “Colour Removal From Aqueous Dye Solution Usingmagnesium Chloride And Gulmohar Plant (Delorixregia) Leaf Powder,” Pollution research, Vol. 32, No. 2, pp. 365 – 370, 2013.

17. G. Vijayaragavan, R. Rajasekaran, S. Shanthakumar, “Removal of Reactive Yellow Dye Using Natural Coagulants In Synthetic Textile Waste Water,” Int. J. Chem. Sci, Vol. 11, No. 4, pp, 1824 – 1830, 2013.

18. S. Abinandan, M. Premkumar, K. Praveen, S. Shanthakumar, “Nutrient Removal From Sewage An Experiemental Study At Labaratory Scale Using Micro Algae,” International Journal of Chem Tech Research, Vol. 5, No.5, pp. 2090 – 2095, 2013.

19. Aravind Unnithan, S. Shanthakumar, A. N. Brijesh Nair, “Determination of Flow Pattern And Depository Rate of Contaminants In A Pipe Network – A Laboratory Scale Study,” International Journal of ChemTech Research, Vol. 5, No. 5, pp. 2096 -2101, 2013.

20. M. Mittal, S. Basu, A. Sofi, “Effect of SIKA Viscocrete on properties of concreate,” International Journal of Civil Engineering, Vol. 2, No. 4, pp. 61 – 66, 2013.

21. Prachi, P. Gautam, D. Madathi, A. N. Brijesh Nair, “Nano Technology in Waste water treatment : A Review,” International Journal of Chem Tech Research, Vol. 5, No. 5, pp. 2303 – 2308, 2013.

22. P. Youaraj, A. Ramachandra Murthy, Nagesh R. Iyer, S. K. Sekar, Pijush Samui, “Support vector regression based model to predict fracture characteristics of high strength and ultra-high strength concrete beams,” Engineering Fracture Mechanics, Vol. 98, pp. 29 - 43, 2013.

23. C. Rethnasamy, T. Rajagopal, H. Muthuraj, “Bending behavior, deformability and strength analysis of Prefabricated Cage Reinforced Composite beams,” Construction and Building Materials, Vol. 38, pp. 482 – 490.

24. S. Parimala, L. Elango, “Impact of recharge from a check dam on groundwater quality and assessment of suitability for drinking and irrigation purposes,” Arabian Journal of Geoscience, 2013.

25. K. Yarrakula, D. Deb, B. Samanta, “Comparative Evaluation of Cartosat-1 And SRTM Imageries Digital Elevation Modelling,” Geo Spatial Information Science, 2013

26. A. Das, B. Das, S. C. Mukherjee, S. Pati, R. N. Dutta, K. C. Saha, Q. Quamruzzaman, M. M. Rahman, T. R. Chowdhury, D. Chakraborti,   “Groundwater: Arsenic Contamination” Encyclopedia of Environmental Management, pp. 1262 – 1280.

27. V. I. Raja, M. S. Kumar, P. Jayabalan, “Ultimate strength of uniaxially compressed mild steel plate at elevated temperature” Journal of structural fire engineering, Vol. 4, No. 4, pp. 245 – 257, 2013.

28. A. Ghosh, V. Sairam and B. Bhattaharjee, “Effect of nano-silica on strength andmicrostructure of cement silica fumepaste, mortar and concrete”, The Indian Concrete Journal, Vol. 1, pp. 1-5, 2013.

29. A. R. Hariharan, A. S. Shanthi, G. Mohan Ganesh, “Statistical correlation to predict the compressive strength of binary and ternary blended concretes”, Research Journal of Recent Sciences, vol. 2(11), pp.20-18, 2013.

30. M. Poddar, A. N. Brijesh Nair, A. B. Mahindrakar, “A Review on the Use of Rapid Small Scale Column Test (RSSCT)on Predicting Adsorption of Various Contaminants”, IOSR Journal of Environmental Science, Toxicology and Food Technology, Vol. 3, No.1, pp.77-85, 2013. 

31. B. Srimuganandam and S. M. Shiva Nagendra, “ Impact of Meteorology on Roadside Ambient Particulate Matter Concentrations”, Modern Traffic and Transportation Engineering Research, Vol. 2, No.3, pp. 141-147, 2013.

32. V. Abhishek and P. Jagadeesh, “Dynamic Modeling of Building Services Projects: A Simulation Model for Real-Life Hospital Project”, KICEM Journal of Construction Engineering and Project Management, Vol.3, No.3, pp. 35-41, 2013.

33. J. Ghosh, A. R. Ghosh and P. Porchelvan, “Does Acclimatization have any Impact on Primary Health Status Among Students of VIT University, Vellore, India”, Webmed Central PUBLIC HEALTH, Vol.4, No.2, pp.1-7, 2013.

34. S. Chowdhury , A. T. Maniar and Om Suganya, “ Polyethylene Terephthalate (PET) Waste as Building Solution”, International Journal of Chemical, Environmental & Biological Sciences, Vol.1, No.2, pp.308-312, 2013.

35. R. Ravi and S. K. Sekar, “ Enhancing the Mechanical Characteristics of Lime Mortar over the ages-A Review”, Indian Journal of applied research, Vol.3,  No.8, pp. 294-298, 2013

36. P. Thirumalini and S. K. Sekar, “Review on Herbs used as Admixture in Lime Mortar used in Ancient Structures”, ”, Indian Journal of applied research, Vol.3,  No.8, pp. 295-298, 2013

37.  A. Abinandan, B. A. Anand and S. Shanthakumar, “Assessment of physic-chemical characteristics of groundwater: A case study”,Int.J. Env. Health. Engg., vol. 2, No. 6, pp. 34- 37, 2013.

38. S. Parimala Ranganayaki and L. Elango, “A Review on Managed Aquifer Recharge by Check Dams: A Case Study Near Chennai, India”, International Journal of Research Engineering and Technology, vol. 2, No. 4, pp. 416-423, 2013.

39. I.S.Nair, S.Parimala Ranganayaki and L.Elango, “Identification of Seawater Intrusion by Cl/Br Ratio and Mitigation through Managed Aquifer Recharge in Aquifers North of Chennai, India”, Journal of Ground water research, vol. 2, No. 1, pp. 155-162, 2013.

40. T. Shanmugapriya and R. N. Uma, “Experimental Investigation on Silica Fume aspartial Replacement of Cement in High Performance Concrete”, The International Journal of Engineering and Science, vol. 2, no.5, pp. 40-45, 2013.

41. Ch. Maruthi Devi, Kiran Yarrkula and Usha Madhuri T., “ Assessment and Mapping of Water Quality Index in Prakasam District AP Using GIS”, International Journal of Geomatics and Geossciences, vol. 3, No. 3, pp. 416-424, 2013.

 

2012

1. Ganapathy Pattukandan Ganapathy, Ajay S. Rajawat, “Evaluation of Liquefaction potential hazard of Chennai city, India: using geological and geomorphological characteristics”, Nat Hazards, Vol.64 pp. 1717-1729, 2012.

2. Pranjali Gautam, Suniti. S, Prachi, Kumari Amrita, Deepa Madathil, Brijesh Nair. A.N., “A review on recent advances in biosensors for detection of water Contamination”, International Journal of Environmental Sciences, Vol.2, No. 3, pp.1565-1674, 2012.

3. P.Priyadharshini, G. Mohan Ganesh, A.S.Santhi, “A review on Artificial Aggregates”, International journal of Earth sciences and Engineering, Vol. 5, No. 3, pp. 540-546, 2012.

4. K.Srinivasan, A. Sivakumar, “Strength properties of Geopolymer Mortar containing binary and ternary blends of Bentonite”, ARPN Journal of Engineering and Applied Sciences, Vol.7, No.11,pp. 1436-1445,2012.

5. Vaani N., Sekar S.K., “Regional landslide hazard zonation and Vulnerabilty analysis using AHP and GIS- A Case study of Nilgiris District, Tamilnadu, India”, Disaster Advances, Vol. 5, No. 4, pp. 171-176, 2012.

6. SS.Asadi, B.V.T.Vasantha Rao and S.K.Sekar, “Creation of physical characteristics information for Natural Resources Management Using Remote sensing and GIS : A Model study”, Vol.2, No. 2, pp. 226-232, 2012.

7. Viswanathan T.S, Mohan Ganesh G., Santhi A.S., “Shear stress distribution of flat plate using finite element analysis”, International Journal of Civil and Structural Engineering, Vol. 2, No. 3, pp. 914-923,2012.

8. K. Sudarshan, K. Praveen, S. Shanthakumar,“Assessment of noise levels in Vellore city in Tamilnadu” Indian Journal of Air Pollution Control, Vol. 12, No. 2, pp. 67-80, 2012.

9. G.P. Ganapathy, C.L.Hada, “ Landslide Hazard Mitigation in the Nilgiris District, India – Environmental and Societal Issues”, International Journal of Environmental science and development,  Vol.3, No. 5 pp. 497-500,2012.

10. Rama Mohan Rao P., H. Sudarsana Rao, “Strength Properties Of Class C Flyash Concrete With Variable Aggregate Binder Ratio”, Journal Of Construction Management, Vol. 27, No.4, pp.39-44, 2012.

11. T. Shanmugapriya, R.N. Uma,” Optimization of Partial Replacement Of M-Sand By Natural Sand In High Performance Concrete With Silica Fume”, International Journal of Engineering Sciences & Emerging Technologies, Vol.2, No. 2, pp. 73-80,2012.

12. Santhosh Reddy Yekola, Kiran Yarrakula, Lashmi Prasad, T. Madhu, “ Land Use Planning using Geographical Information System (GIS)”, International Journal of Engineering and Science and Technology, Vol. 4, No. 5, pp. 2167-2175, 2012.

13. Ch. Maruti Devi, Kiran Yarrakula, T. Usha Madhuri,” A Study on Ground Water Quality used for irrigation in Prakasam District of A.P., India using Geographical Information System”, Bonfring International Journal of Industrial and Management Science, Vol. 2, No. 2, pp- 28-32,2012.

14. Piyush Gupta, Surendra Roy, Amit Mahindrakar,” Treatment of water using hyacinth, water lecttuce and vetiver grass- A review”, Resource and Environment, Vol.2, No.5, pp. 202-215, 2012.