SL. NO |
YEAR |
TITLE |
PROJECT REF. ID |
PRINCIPAL INVESTIGATOR |
FUNDING AGENCY |
DATE OF COM FROM |
TO END |
DURATION |
TOTAL PROJECT COST |
CURRENT STATUS |
COLLABORATION IF ANY (INTERNATIONAL/ NATIONAL) |
1 |
24-Feb |
Model-Based Development of Domain ECU (DCU) and Validation through Hardware in Loop (HiL) Simulation for Commercial Vehicle Applications |
Co-PI: Dr. B. Ashok, Dr Vijendran Venkoparao, Chair Professor, IIT Palakkad Technology IHub Foundation, Dr. Om Kumar Krishnan, Professor, IIM Kozhikode PI: Albert Sunny |
IMPRINT, IIT Palakkad Technology IHUB foundation |
25-01-2024 |
24-01-2026 |
2 years |
60,00,000 |
Ongoing |
National |
2 |
24-Jan |
Development of a Nano-Enhanced Phase Change Material Based Wickless Heat Pipe: An Electronic Thermal Management Prospective |
|
Dr. Tapano Kumar Hota |
SERB |
09-01-2024 |
08-01-2027 |
3 years |
18.30,000 |
Ongoing |
National |
3 |
24-Jan |
Transitional Education: Strategy Roadmap for Sustainable Development and Skill Enhancement towards Industry 5.0 |
|
PI: Dr. R. Vasudevan, Co-PI: Dr. B. Ashok, Dr. R. Manohanran & Dr. D. Mallikarjuna Reddy |
British Council |
22-01-2024 |
21-01-2025 |
1 year |
4200000 |
Ongoing |
International |
4 |
24-Jan |
Development of a low heat-input welding technique for armour steel joints to enhance high cycle fatigue behaviour by suppressing softening of the heat affected zone |
Dr. M. Manikandan, Dr. Vinoth Jebaraj & Dr. N. Arivazhagan |
DRDO |
1/4/2024 |
|
3 years |
3,368,000 |
|
|
|
5 |
24-Jan |
Graphite carbon nitride coated carbonized wood evaporator for effective low-temperature thermal desalination: Removal of microplastics and geavy metals |
|
Dr. R. Kamatchi |
Ministry of Earth Sciences |
1/9/2024 |
|
|
3278000 |
|
|
6 |
24-Jan |
Microstructure evolution during multiaxial fatigue behaviour of metastable -titanium alloy for aerospace application: An experimental and texture modeling study |
|
Dr. Ashish Kumar |
SERB |
9-Jan-24 |
|
3 years |
|
|
|
7 |
24-Jan |
Development of a Nano-Enhanced Phase Change Material Based Wickless Heat Pipe: An Electronic Thermal Management Prospective |
|
Dr. Tapano Kumar Hota |
SERB |
9-Jan-24 |
|
3 years |
|
|
|
8 |
23-Dec |
BENEFIT: Combining TheoryaNd practicEFor Sustainable Manufacturing |
Dr. A. Raja Annamalai, Dr. C. Pandivelan, and Dr. T.C. Kanish |
Dr. K. Devendranath Ramkumar, Co-PI: Dr. A. Raja Annamalai, Dr. C. Pandivelan, and Dr. T.C. Kanish |
British Council under Going Global Partnership Grant 2023, UK |
|
|
|
40,000 GBP |
Ongoing |
Saint-Gobain India Pvt. Ltd. Chennai |
9 |
23-Dec |
Development of a learning framework for renewable energy-based battery swapping station for electric vehicles: A young professional perspective for start-ups, business hubs and employibility |
|
Dr. B. Ashok, Dr. Tapano Kumar Hotta, Dr. Bibhuti Bhushan Sahoo & Dr.K. Palanisamy |
British Council under Going Global Partnership Grant 2023, UK |
|
|
|
40,000 GBP |
Ongoing |
Dr. T. Dhandapani (RRT Electro Power Ltd, India) |
10 |
23-Dec |
Empowering Young Engineers in Additive Manufacturing Industry for Future Growth, Innovation and Employability |
|
Dr.M. Anthony Xavior & Dr. Ashwath (Alumni) |
British Council, UK |
|
|
|
40,000 GBP |
Ongoing |
Shree Rapid Technologies, Bangalore |
11 |
23-Dec |
Preparation and characterisation of poly(2-methoxyethyl acrylate)/Nano-hydroxyapatite/ZnO nanocomposite coating for reducing bio-leaching and bio-film formation in SS316L orthopaedic implants |
|
PI: Dr. Natarajan Chandrasekaran and Co-Pi's: Dr. Jayakrishna, Dr. Arulvel of SMEC and Dr. John Thomas(CNBT) PI: Dr. Natarajan Chandrasekaran (CNBT) |
Indian Council of Medical Research (ICMR) |
12/26/2023 |
1/14/2025 |
1 year |
61, 46, 546 |
Ongoing |
|
12 |
22-Dec |
Design and Development of Digital Twin of Industrial Series Elastic Actuator Unit for applications in Unmanned and Unstructured Environment |
|
PI: Dr. Bikash Routh |
DST-SERB |
16-12-2022 |
15-12-2025 |
3 years |
18,10,000 |
Ongoing |
National |
13 |
22-Dec |
Fatigue Testing Machine |
|
PI: Dr. A. Raja Annamalai Co-PI: Dr. K. Devendranath Ramkumar, Dr. R. Vasudevan, |
DST-FIST |
19-12-2022 |
18-12-2027 |
5 years |
92,00,000 |
Ongoing |
National |
14 |
23-Nov |
AI-Driven Adaptive Fast Charging for Electrical Vehicles- Empowering Skills and Curriculum Development |
|
Dr.B.Ashok ( Co-PI), from SELECT Dr.Chitra A, (PI), Dr. Indragandhi, SELECT Dr.Thirumalaivasan R, Dr.Razia Sultana W, SELECT |
Royal Academy of Engineering, UK |
11/15/2023 |
11/14/2025 |
2 years |
6,599,000 |
Ongoing |
International |
15 |
23-Nov |
Application of Hydrogen derived from Bio-Gas using BSR in Fuel Cell Vehicles |
|
Dr. C. Ramesh Kumar |
DST-ASEAN-India Collaborative R&D scheme |
11/6/2023 |
11/5/2025 |
2 years |
2,072,000 |
Ongoing |
National |
16 |
23-Oct |
Prompting European Union approach on Trustworthy Artificial Intelligence and Innovative Product Development Techniques for Digital Green Transformation |
|
PI: Dr. Denis Ashok Co-PI: Dr. R. Vasudevan & Dr. B. Ashok |
Erasmus+ grant Jean Monnet Actions - EU-TRIPOD |
23-Oct |
26-Oct |
3 years |
Euro 30,000 |
Ongoing |
International |
17 |
22-Oct |
Performance Improvement of Darrieus Hydrokinetic Turbine using different J-shape blades and Vortex Generator |
|
PI: Anuj Kumar |
DST-SERB |
6/10/2022 |
5/10/2025 |
3 years |
18,30,000 |
Ongoing |
National |
18 |
23-Sep |
Hydrogen Energy for a Decarbonised Future (HEAD) |
|
PI: Dr. A. Sateesh, Co-PI: Dr. Saboor & Dr. M. Natarajan and team from UCL |
British Council under going Global Partnership Grant 2023 |
Sep-23 |
Sep-25 |
2 years |
39,810 GBP |
Ongoing |
International |
19 |
23-Jul |
Anti-thrombotic superhemophobic surfaces |
|
Dr. Renold Elson, 50,2 |
SPARC |
28-07-2023 |
|
2 years |
50,22,900 |
Ongoing |
National |
20 |
23-Jul |
Functionalisation of new Titanium alloys after ECAP processing and surface treatment |
|
Dr. Geetha Manivasagam |
DST |
|
|
|
39,13,000 |
Ongoing |
National |
21 |
22-Jul |
Investigation of Characteristic Performance of Armour Weldments under Sub-Zero Temperature" |
CVRDE- DRDO under the CARS Scheme |
Dr. Manikandan, Dr. K. Gokul Kumar & Dr. S. Senthil Kumaran |
CVRDE- DRDO under the CARS Scheme |
|
|
2 years |
9,77,040 |
Ongoing |
National |
22 |
23-Apr |
Design and Development of Surface Engineered Solutions to Enhance the Corrosion Resistance of the solar Energy Storage Container |
|
PI: Dr. M. Manikandan Co-PI : Dr. Rajashekhar Y, Dr. C. Chiranjeevi & Dr. N. Arivazhagan |
DST |
28-03-2023 |
|
2 years |
48,85,000 |
Ongoing |
National |
23 |
22-Apr |
Study of Cancer Cell Mechanics by means of compound droplet modelling in microfluidic systems |
|
PI: Dr. Sreeja Sadasivan Co-PI: Dr. A. Senthil Kumar, Director Co2 Centre Co-PI: Dr. Particia Sebastain, Oncology, CMC |
DST-SERB-Power Grant |
20-04-2022 |
19-04-2025 |
3 years |
2998000 |
Ongoing |
|
24 |
23-Mar |
Separation efficiency and distillate yield enhancement using advanced technologies in integrated ocean thermal energy conversion-low temperature thermal desalination |
|
PI: Dr. S. Arulvel Co-PI: Dr. D. Dsilva Winfred Rufuss, Dr. D. Sakthivadivel & Dr. K. Balaji |
Deep Ocean Mission, Ministry of Earth Sciences (MoES) Govt. of India |
|
|
2 years |
1,98,48,896 |
Ongoing |
National |
25 |
23-Feb |
Numerical studies on start/unstart behavior of scramjet intake |
|
PI: Prof. P. Senthilkumar Co-PI:Dr. Bibin John, Dr. R. Thundil Karuppa Raj, Dr.M.Ganapathi |
AR&DB |
1/3/2023 |
28-02-2024 |
1 Year |
23,35,200 |
Ongoing |
National |
26 |
22-Jan |
Design of concentrated solar receiver tube using inverse thermo-elastic analysis for improved efficiency and safe operation of solar power plants |
|
PI: Dr. Sudhakar, IIT Goa Co-PI: Dr. N. Sekapandian |
CRG-SERB |
31-01-2023 |
30-01-2026 |
3 Years |
12,18,000 (App.) |
Ongoing |
National |
27 |
22-Jan |
Deisgn of concentrated solar receiver tube using inverse thermo-elastic analysis for improved efficiency and safe operation of solar power plants |
|
PI: Dr. Somasundharam S Co-PI: Dr. N. Gnanasekaran (NIT Surathkal) |
CRG-SERB |
30-01-2023 |
29-01-2026 |
3 Years |
27,94,800 |
Ongoing |
National |
28 |
22-Jan |
Shallow Geothermal integrated thermally activated building cooling system design - Pathway to nature-based free cooling (GeoTABS) |
|
PI: Dr. Balaji K, Co-PI: Dr. D. Sakthivadivel & Dr .G. Praveen Kumar |
DST-SERB-CRG |
30-01-2023 |
30-01-2026 |
3 Years |
19,20,000 |
Ongoing |
National |
29 |
2021 |
DYNAMIC OF CAGE FOR HIGH SPEED BALL BEARING - Analytical Study |
|
PI: Dr. Sovan Sundar Dasgupta Co-PI: Dr. Rajasekhara Reddy Mutra Co-PI: Dr. M.Ganapathi Co-PI: Dr. R.Vasudevan |
CVRDE, Chennai |
20.04.2021 |
19.04.2024 |
03 years |
1522000 |
Ongoing |
|
30 |
2021 |
Development of a Stable Machinability Investigation and Thermal Modelling of Aerospace Material |
|
PI: Dr. Chinmaya P. Mohanty Co-PI: Dr.A. Raja Annamalai |
AR & DB |
20.04.2021 |
19.04.2024 |
03 years |
1203950 |
Ongoing |
|
31 |
2021 |
Stress and Rotary Dynamics analysis of three types of Pumps for Aircraft Application |
|
PI: Dr. R. Manoharan Co-PI: Dr. N. Govindha Rasu |
CTTC- Bhubaneswar |
13.05.2021 |
12.05.2024 |
03 years |
1517480 |
Ongoing |
|
32 |
2021 |
DYNAMICS OF CAGE FOR HIGH SPEED BALL BEARING - ANALYTICAL STUDY |
|
PI: Dr. Sovan Sundar Dasgupta Co-PI: Dr.R.Vasudevan Co-PI: Dr.M.Ganapathy |
CVRDE, Chennai |
06.July-2021 |
05.Jan.2023 |
18 Months |
1522200 |
Ongoing |
|
33 |
2021 |
Development of Direct Injection Technology for Hydrogen Enriched CNG and Biogas for Automobile and Stationary Power Applications |
|
PI: Dr. E.Porpatham Co-PI: Dr. A. Senthil Kumar Co-PI: Dr. S. Murugavelh Co-PI: Dr. G. Natarajan |
DST |
30.09.2021 |
30.09.2024 |
36 Months |
14200000 |
Ongoing |
|
34 |
2021 |
Optimization of flux activated gas tungsten arc welding parameters for stainless steel AISI 304L to achieve maximum weld depth-to-width ratio and improved mechanical properties |
|
PI: Dr. A. John Rajan Co-PI: Dr. T. Sampath Kumar Co-PI: Dr. Vinoth Jebaraj |
ISRO |
11.10.2021 |
10.10.2023 |
24 Months |
1632000 |
Ongoing |
|
35 |
2021 |
Development of Carrera Unified Formulation for the Large Deflection and Post Buckling Analysis of Variable Angle Tow Composite Laminate |
|
PI: Dr. Samukham Surya |
DST-SERB |
13.11.2021 |
12.11.2023 |
2 years |
949200 |
Ongoing |
|
36 |
2021 |
Sustainable Biogasoline and Biocrude Fuels Production through Hydrothermal Liquefaction of Biomass and its Utilization |
|
PI: Dr.R. Prakash Co-PI: Dr. P. Padmanathan Co-PI: Dr. C.G. Mohan |
DST-SERB (CRG) |
25.11.2021 |
25.11.2024 |
3 years |
2854000 |
Ongoing |
|
37 |
2021 |
Sorption hydrogen compressor for vehicular and power generation appliations |
|
PI: Dr. Vinod Kumar Sharma Co-PI: Dr. A. Satheesh Co-PI: Dr. R. Prakash |
DST-SERB (CRG) |
25.11.2021 |
25.11.2024 |
3 years |
4664000 |
Ongoing |
|
38 |
2021 |
A Novel and Cost-effective Biogas Purification Technology using Polyacrylamide Gel to Power Bio-methane in Automobiles |
|
PI: Dr. Bibhuti Bhusan Sahoo Co-PI: Dr. Dharmendra Kumar Bal |
DST-SERB (CRG) |
25.11.2021 |
25.11.2024 |
3 years |
3345000 |
Ongoing |
|
39 |
2021 |
A Novel method of on-board hydrogen generation by methanol steam reforming with engine heat recovery strategy for direct injection of hydrogen in a CNG fuelled automotive SI engine |
|
PI: Dr. E.Porpatham Co-PI: Dr. A. Senthil Kumar Co-PI: Dr. Cheralathan Co-PI: Dr. G. Natarajan |
DST-SERB (CRG) |
25.11.2021 |
25.11.2024 |
3 years |
3663000 |
Ongoing |
|
40 |
2021 |
A Novel Energy Efficient Human-Robot Callaborative Disassembly Approach based on Human Perception for End of Life Products towards Industry 4.0 |
|
PI: Dr. Gunji Bala Murali |
TARE-SERB |
2/12/2021 |
1/12/2024 |
3 years |
1860000 |
Ongoing |
|
41 |
2021 |
Investigation on the role of residual stresses on shape memory effect and super-elasticity in shape memory alloy welds |
|
PI: Dr. Anoj Giri |
TARE-SERB |
2/12/2021 |
1/12/2024 |
3 years |
1830000 |
Ongoing |
|
42 |
2021 |
Sustainable Design and Development of an eco-friendly multilayer control of abcterial infiltration |
IFPRC-022-135-2020 |
PI: Dr. K. Jayakrishna Co-PI: Dr. Aravind Raj |
Dean ship of Scientific Research, King Abdul Aziz University, Ministry of Education, Kingdom of Saudi Arabia |
24-12-2021 |
24-12-2023 |
2 years |
2997543 |
Ongoing |
|
43 |
2021 |
DST- PURSE Scheme Additive Manufacturing for Fostering Transdisciplinary Research |
SR/PURSE/2020/34 |
Dr.R.Vasudevan Dr.K.Devendrananth Ramkumar Dr.Raja Annamalai Dr.A.Nirmala Grace Dr.Raja Sellappan |
DST -PURSE |
15.02.2021 |
14.02.2025 |
4 |
20,00,00,000 |
Ongoing |
Nil |
44 |
2021 |
Biomass driven trigeneration system for improving the livelihood of Scheduled Tribes at Athanavur village, Yelagiri Hills, Tamil Nadu |
|
Dr. D. Sakthivadivel Dr. G. Praveen Kumar Dr. Bibin John |
DST- STI HUB |
27.03.2021 |
26.03.2024 |
3 |
1,08,12,139 |
Ongoing |
|
45 |
2020 |
Bioconversion of CO2 to Biofuels through Microbial Catalyzed Systems |
PR31259/PBD/26/756/2019 |
PI: Dr. G. Velvizhi Co-PI: Dr. A.Senthilkumar Co-PI: Dr.J.Ranjitha |
DBT |
9/3/2020 |
8/3/2023 |
03 years |
4997782 |
Ongoing |
|
46 |
2020 |
Development and optimization of Performance and Emission Characteristics of CI,SI and Stirling Engine using Hydrogen Enriched Bio-CNG produced from Anaerobic Co-Digestion with Food waste, Tanery waste, Stubble waste and STP Sludge |
DST/TDT/WMT/2019/22 |
PI: Dr.E.Porpatham |
DST under Proof of concept |
27-05-2020 |
26-11-2020 |
06 Months |
499950 |
Ongoing |
Dr.P.Shanmugam, CSIR-PLRI Dr.P.Rajeeva Kumar, BIT Mesra |
47 |
2020 |
Design, fabrication and testing of portable, high-sensitivity aptasensors for one-step viral diagnostics |
CVD/2020/001120 |
PI: Dr.Murugan R |
DST |
26-06-2020 |
25-06-2021 |
1 Year |
1500000 |
Ongoing |
|
48 |
2020 |
Functionally gradient inner cylinder TiN coatings for Vacuum chambers |
59/14/06/2020-BRNS/59004 |
PI. Dr Sitaram Dash Co-PI: Dr.U.Narendra Kumar |
DAE-BRNS |
17-07-2020 |
16-07-2023 |
03 years |
3321050 |
Ongoing |
|
49 |
2020 |
Development of coating parameters for two-source evaporation to create sequentially deposited EBC coatings by application of EB-PVD technology |
|
PI-Dr. Arivarasu M, Co-PI- Dr. Arivazhagan N Co-PI- Dr. Nageswara Rao |
DST-NAWA-Poland |
26-07-2020 |
25-07-2022 |
2 Years |
950000 |
Ongoing |
Dr. Andrzej Nowotnik, Rzeszow University of Technology,Poland |
50 |
2020 |
Development and Characterization of Carbon Fiber Reinforced Cement Brake Pad with Nano Encapsulated Lubricant for Enhancing better Tribological and Braking Performance |
ARMREB/MAA/2020/226 |
PI- Dr. S.Senthilkumaran Co-PI. Dr. Renolds Elsen |
DRDO |
10/8/2020 |
9/8/2023 |
03 years |
4195190 |
Ongoing |
|
51 |
2020 |
Simultaneous laser annealing and doping technique to improve the energy density of LiFePO4 electrodes deposited on textured current collectors |
SRG/2020/000577 |
PI: Dr. Nammi Srinagalakshmi |
DST |
8/10/2020 |
7/10/2023 |
03 years |
2706755 |
Ongoing |
|
52 |
2020 |
Development and Performance Evaluation of Fouling Resistant Heat Exchangers |
SRG/2020/002159 |
PI: Dr.Lalit Kumar Bansal |
DST-SERB |
9/10/2020 |
8/10/2023 |
03 years |
1950000 |
Ongoing |
|
53 |
2020 |
Design, Development and Characterization of Nanocellulose / PVA Nanocomposite Facilitated Transport Membranes for Efficient CO Separation from Biogas |
SRG/2020/002388 |
PI: Dr.Ahankari Sandeep Sureshrao |
DST-SERB |
9/10/2020 |
8/10/2023 |
03 years |
1236401 |
Ongoing |
|
54 |
2020 |
Harnessing the potential of renewable energy (Solar/Wind) for sustainable building energy management through Compressed Air Energy Storage |
|
PI: Dr.V. Gayathri |
DST-IC IMPACT Indo- Canada |
9/10/2020 |
8/10/2023 |
03 years |
3864000 |
Ongoing |
Prof. Fariborz Haghighat Department of Building, Civil, and Environmental Engineering, Concordia University |
55 |
2020 |
Non- linear Dynamic Characterization of Multi Functional CNT Reininforced Honeycomb Tapered Composite Sanwich Plates under Thermal Environment |
ARDB/01/1051968/M/I |
PI: Dr.R.Vasudevan Co-PI: Dr.A.Andanda babu |
AR&DB |
3/11/2020 |
2/11/2022 |
2 Years |
1560700 |
Ongoing |
|
56 |
2020 |
IR reflective polymer/PCM encapsulations for rendering perovskite photovoltaics environmentally robust aging, durability and efficiency studies through solar simulations, spectroscopy and ab initio simulations |
|
PI: Dr.Tiju Thomas (IIT M) Co-PI: Dr. Ariful Rahaman (SMEC) Co-PI: Dr. Sumanagala T.P. (SAS) |
Indo -Hungarian Joint Research Scheme |
10/11/2020 |
9/11/2023 |
03 years |
6058000 |
Ongoing |
PI Dr. Mousumi Upadhay Kahaly (ELI-HU Research and Development Nonprofit Public Benefit Limited Liability Company) Co- Principle Investigator(s) : Dr. Subhendu Kahaly (ELI-HU) CO-PI Dr. Laszlo Ovari (ELI-HU) |
57 |
2020 |
To study the effect of momentum flux ratio on discharge coefficient of the screech holes |
|
PI: Dr.Thundil Karuppa Raj R, Co-PI: Dr. Bibin John and Co-PI: Prof. P. Senthil Kumar |
GTRE Bangalore |
20-10-2020 |
19-10-2022 |
02 Years |
958600 |
Ongoing |
|
58 |
2020 |
Effectiveness of Leading Edge Film Cooling Applied to First Stage Stator blade Row of Gas Turbine Engine- A Numerical Study |
GTRE/MMG/BMRI/1156/20 |
PI: Dr. Bibin John, Co-PI: Dr. Thundil Karuppa Raj Co-PI: Dr.SreejaSadasivan |
GTRE Bangalore |
20-10-2020 |
19-10-2022 |
02 Years |
968600 |
Ongoing |
|
59 |
2019 |
Sustainable Production of Fourth Generation Bio-butanol from Municipal Solid Waste Biomass and its Air Quality Assessment Using Direct Injection Spark Ignition Engine |
EEQ/2018/000725 |
PI: Dr.K.Nanthagopal |
DST-SERB |
1/1/2019 |
1/1/2022 |
03 years |
3729000 |
Ongoing |
|
60 |
2019 |
Controlled drug delivery to prevent bacterial adhesion and enhace ossteoconduction of Ti alloys used in spinal application by tailoring the surface with nanopores. |
|
PI: Dr. Geetha Manivasagam |
DST- INDO-AUSTRIA |
3/1/2019 |
2/1/2021 |
2 Years |
648500 |
Ongoing |
Dr.Juergen M Lackner Materals - Institute - Surface Technologies- Austria |
61 |
2019 |
Design and development of a four-wheeled electric vehicle for research, teaching and outreach in Tamil Nadu, India |
IAPP18-19\154 |
PI: Dr. R.Thundil Karuppa Raj Co-PI: Dr. Denis Ashok |
Royal Academy of Engineering -UK |
20-02-2019 |
20-02-2021 |
2 Years |
4632000 |
Ongoing |
International - Loughborough University, UK Prof. Rui Chen National: Valueo India Pvt Ltd, Chennai |
62 |
2019 |
Enhancing research based learning and teaching on advanced materials and manufacturing technologies for aerospace sectors in India and UK |
18/19 - IAPP18-19\161 |
PI: Dr. Devendranath Ramkumar Co-PI: Dr.T.C.Kansih Co-PI: Dr. A. Raja Annamalai |
Royal Academy of Engineering -UK - 18/19 - IAPP18-19\161 - Successful |
20-02-2019 |
20-02-2021 |
2 Years |
4633000 |
Ongoing |
International - Cranfield University,UK Dr. Supriyo Ganguly Mr. K. Madhusudhana Sankar - TASL |
63 |
2019 |
A Gradient Approach for Engineering Interfacial Tissue Constructs using mesenchymal stem cells suitable for Osteochondral |
CRG/2018/003965 |
PI: Dr. Murugan Ramalingam |
DST-SERB |
24-06-2019 |
23-06-2022 |
03 years |
2658120 |
Ongoing |
|
64 |
2019 |
Sustainable fourth generation bio-fuel from micro-algae and its characterization for automotive application as future bio-energy |
CRD/2018/000061 |
PI: Dr.B.Ashok Co-PI: Dr. K.Nanthagopal |
DST-ASEAN-INDO (AISTDF) |
4/7/2019 |
3/7/2021 |
2 Years |
1342000 |
Ongoing |
International- University of Malaya -Dr.H.C.Ong Dr.Phung Le Ho Chi Minh City University of Technology Vietnam |
65 |
2019 |
Enhancement of Biocompatibility and wear resistance of orthopaedic beta titanium alloy Ti-35Nb-7Zr-5Ta By nanosurface modification. |
22(0803)/19/EMR-II |
PI: Dr. Geetha Manivasagam |
CSIR |
25-07-2019 |
24-07-2022 |
03 years |
2321000 |
Ongoing |
|
66 |
2019 |
Design and Development of an jaffordble gait training device. |
SEED/TIDE/2018/102/G |
PI: Dr. Mohan Verma |
DST-SERB |
14-08-2019 |
13-08-2022 |
03 years |
2515270 |
Ongoing |
|
67 |
2019 |
Comparative evaluation of Joints produced by GTAW and PAW in 12 mm thick plates of maraging steel MDN 250 for microstructure, microsegregation, strength and fracture toughness |
|
PI: Dr. M. Manikandan Co-PI : Dr. Arivazhagan Co-PI : Dr. Nageswara Rao M |
AR & DB |
2/9/2019 |
|
03 years |
1416600 |
Ongoing |
|
68 |
2019 |
Development of criteria for estimating dynamic magnification factor of mistuned bladed disk under forced vibration |
GTRE/MMG/BMR1/1146/19/CARS/A/19 dated on 10/Sep/2019 |
PI: Dr.Mallikarjuna Reddy Co-PI: Dr.R.Vasudevan Co-PI: Dr.M.Ganapathy |
GTRE Bangalore |
24-09-2019 |
23-09-2021 |
2 Years |
950000 |
Ongoing |
Nil |
69 |
2019 |
Experimental Investigations on crossworthiness of carbon |
TNSCST/STP-PRG/AR/2018-2019 |
PI: Dr.P.Ponnusamy |
Tamilnadu State Council of Science and Technology, Tamilnadu |
4/11/2019 |
3/11/2021 |
2 Years |
415000 |
Ongoing |
|
70 |
2019 |
Extreme Learning Machine based Pitch Angle Prediction for Uniform Power Generation and Load Mitigation using HIL Simulator of Digital Hydraulic Pitch System in Wind Turbine |
TAR!2019/000008 |
PI: Dr.RAMAKRISHNANR |
DST-TARE |
25-10-2019 |
24-10-2022 |
03 years |
1830000 |
Ongoing |
Prof. Dr.Raghunathan Renqasamy,IIT Madras |
71 |
2019 |
Design and Development of CNT Reinforced ceramic composite scaffold by Additve Manufacturing Technique for Bone Tissue Regeneration |
SRG/2019/002038 |
PI: Dr.Renold Elsen |
DST-SERB |
26-11-2019 |
25-11-2022 |
03 years |
3114690 |
Ongoing |
Nil |
72 |
2019 |
Linnaeus Palme |
3.3.1.34.12718-2019 |
PI: Dr.K.Jayakrishna Co-PI: Dr.A.K.Jeevanantham |
Swidish Council for higher education |
3/12/2019 |
2/12/2019 |
1 Year |
592000 |
Ongoing |
University of Skovede |
73 |
2019 |
Development of Flex-Fuel Engine Map and Multi-Mode Combustion Strategy for Ethanol-Gasoline Fueled Direct Injection Motorcycle Engine |
CRG/2019/003325 |
PI: Dr.B.Ashok |
DST-SERB |
19-Dec-19 |
18-12-2022 |
03 years |
4400000 |
Ongoing |
PI(IIT)- Dr.B.Saravanan |
74 |
2019 |
Ultrafine Grain refinement through Low Plasticity Burnishing on WAAM Mgalloy for Aerospace and Automotive Applications |
SP/YO/2019/1287 |
PI: Dr. A.S.S.Balan Co-PI: Dr.R.Ramanujam |
DST -SEED |
27-12-2019 |
26-12-2022 |
03 years |
1745000 |
Ongoing |
Dr.A.S.S.Balan NIT Surathkal, Karnataka |
75 |
2019 |
A New Master Course in Applied Computational Fluid Dynamics" on establishing a New InternationalPG Degree Program in the Area of Computational Fluid Dynamics through |
609965-EPP-1-2019-1-TH-EPPKA2-CBHE-JP |
Dr.R.Vasudevan Prof. Satyajit Ghosh Prof. Bibin John Prof. Thundil Karuppa Raj R Prof. Satheesh E Prof.Devendrakumar Patel Prof. Ashok K Prof. Sekarapandian N Prof. Padmanathan P |
Erasmus+ Scheme" under "Capacity Building in the field of Higher Education 2019 (CBHE2019) |
07.08.2019 |
06.08.2022 |
3 |
76751152 |
Ongoing |
Chiang Mai University , Thailand Cranfield University, UK Universitat Politècnica de Catalunya, Spain University of Malaya, Malaysia ReadLab-Research Innovation Development Lab, Athens, Greece Chiang Mai University , Thailand Naresuan University, Thailand UiTM, Sarawak, Malaysia University of Patras, Greece Manipal Academy of Higher Education, India EEOGroup, Ethens |
76 |
Feb-24 |
Model-Based Development of Domain ECU (DCU) and Validation through Hardware in Loop (HiL) Simulation for Commercial Vehicle Applications |
|
Co-PI: Dr. B. Ashok, Dr Vijendran Venkoparao, Chair Professor, IIT Palakkad Technology IHub Foundation, Dr. Om Kumar Krishnan, Professor, IIM Kozhikode PI: Albert Sunny |
IMPRINT, IIT Palakkad Technology IHUB foundation |
1/25/2024 |
1/24/2026 |
2 years |
6,000,000 |
Ongoing |
National |
77 |
Feb-24 |
Impact Evaluation of Science and Technology Intervention in the Socio-economic Development of Eastern Ghats A Case Study on Athanavur Village, Yelagiri Hills, Tamil Nadu |
|
PI: Dr. Sakthivadivel |
ICSSR |
2/12/2024 |
2/12/2025 |
1 Year |
676,000 |
Ongoing |
National |
78 |
Feb-24 |
Development of Marine Species-Derived Hydroxyapatite Based Scaffold using Robocasting for bone regeneration and Targeted drug delivery for Orthopaedic-related surgical site infections |
Dr. Renold Elson, Dr. Sunita Nayak (SBST) |
Science and Engineering Research Board (SERB) |
2/23/2024 |
2/22/2026 |
2 Years |
575,000 |
Ongoing |
National |
79 |
May-24 |
Development of Sustainable Model for the Lifetime Estimation of Thermal Barrier Coating Systems |
|
PI: Dr. Akash Mohanty & Co-PI: Dr. Sitaram Dash |
CRG-SERB |
4/26/2024 |
4/25/2027 |
3 Years |
3,195,000 |
Ongoing |
National |
80 |
Jun-24 |
Research Capacity Building in Green Hydrogen - The Fuel of the Future |
|
PI: Dr. Sakthivadivel, Co-PI: Dr. S. Arulvel, Dr. B. Ashok & Dr.R. Vasudevan |
SPARC-UKIERI |
5/20/2024 |
5/20/2026 |
2 Years |
4,392,000 |
Ongoing |
International |
81 |
Jun-24 |
Development of AI based framework for the prediction of Hydrogen Embrittlement failure on welded and 3D printed parts |
|
PI: Dr. S. Margret Anouncia (SCOPE), Co-PI: Dr. M. Anthony Xavior, Dr. P. Jeyapandiarajan & Dr. S. Rajkumar (SCOPE) |
SPARC-UKIERI |
5/20/2024 |
5/20/2026 |
2 Years |
5,950,000 |
Ongoing |
International |
82 |
Jun-24 |
High-temperature corrosion and mechanical behaviour of AM fabricated Haynes 282 alloy |
|
PI: Dr. Devasri Fuloria & Co-PI: Dr. Atul Kumar |
Council of Scientific and Industrial Research (CSIR) |
6/18/2024 |
6/17/2027 |
3 Years |
2,800,000 |
Ongoing |
International |
83 |
Jun-24 |
Dexster - Deep learning X-Ray, Spectral, and Spatial feature Sorter for Recycling of Non-Ferrous Metal Scraps |
|
PI: Dr. G.P. Sathish, Co-PI: Dr. R. Ramakrishnan R & Dr. R. Vasudevan |
Ministry of Mines |
6/24/2024 |
12/25/2025 |
18 months |
5,231,000 |
Ongoing |
National |
84 |
Jul-24 |
Design, Modelling, and Structural Integrity of Surface Modified Additively Manufactured Products for Aerospace Applications |
|
PI: Dr Arivarasu M, Co-PI: Dr Vasudevan R, & Dr. Geetha |
ARDB |
3-Jul-2024 |
2-Jul-27 |
3 Years |
2216000 |
Ongoing |
National |