School of Mechanical Engineering (SMEC)

Publications

UG & PG Students Publications

Sl No Calendar Year School Code Title of paper Name of the author/s Name of journal Indexed In Scopus / WOS/Pub Med / ICI / Non Scopus ISSN number Impact factor
1 2022 SMEC Combined effects of composite thermal energy storage and magnetic field to enhance productivity in solar desalination Dsilva Winfred Rufuss D., Arulvel S., Anil Kumar V., Davies P.A., Arunkumar T., Sathyamurthy R., Kabeel A.E., Anand Vishwanath M., Sai Charan Reddy D., Dutta A., Agrawal M., Vilas Hiwarkar V. Renewable Energy   0960-1481 8.001
2 2022 SMEC Integration of artificial neural network, multi-objective genetic algorithm and phenomenological combustion modelling for effective operation of biodiesel blends in an automotive engine Rajkumar S., Das A., Thangaraja J. Energy WOS 0360-5443 7.147
3 2022 SMEC Effect of bubble coalescence on two- phase flow boiling heat transfer in raccoon microchannel - A numerical study Bhuva V.J., Jani J.P., Patel A., Tiwari N. International Journal of Heat and Mass Transfer WOS 0017-9310 5.584
4 2022 SMEC A Review on Machine Learning Models in Injection Molding Machines Selvaraj S.K., Raj A., Rishikesh Mahadevan R., Chadha U., Paramasivam V. Advances in Materials Science and Engineering WOS 1687-8434 1.726
5 2022 SMEC CFD investigation of shock boundary layer interaction in hypersonic flow and flow control using micro ramps Gupta G., Ashok Kumar A., Sivakumar R., Kandasamy J. Aircraft Engineering and Aerospace Technology     0.975
6 2022 SMEC A Cutting-Edge Survey of Tribological Behavior Evaluation Using Artificial and Computational Intelligence Models Selvaraj S.K., Raj A., Dharnidharka M., Chadha U., Sachdeva I., Kapruan C., Paramasivam V. Advances in Materials Science and Engineering WOS 1687-8434 1.726
7 2022 SMEC Wear Based Lifetime Estimation of a Clutch Facing using Coupled Field Analysis Kulkarni A., Mahale R., Kannan C. International Journal of Automotive and Mechanical Engineering SCOPUS 2229-8649 -
8 2022 SMEC A comprehensive review on incremental deformation in rolling processes Agrawal P., Aggarwal S., Banthia N., Singh U.S., Kalia A., Pesin A. Journal of Engineering and Applied Science     -
9 2022 SMEC Circular economy adoption challenges in medical waste management for sustainable development: An empirical study Kandasamy J., Kinare Y.P., Pawar M.T., Majumdar A., K.E.K. V., Agrawal R. Sustainable Development WOS 1099-1719 6.159
10 2022 SMEC Additive manufacturing of dental material parts via laser melting deposition: A review, technical issues, and future research directions Selvaraj S.K., Prasad S.K., Yasin S.Y., Subhash U.S., Verma P.S., Manikandan M., Dev S.J. Journal of Manufacturing Processes WOS 1526-6125 5.01
11 2022 SMEC Thermo-hydraulic and entropy generation investigation of nano-encapsulated phase change material (NEPCM) slurry in hybrid wavy microchannel Doshi S., Kashyap G., Tiwari N. International Journal of Numerical Methods for Heat and Fluid Flow WOS 0961-5539 4.17
12 2022 SMEC Phase Change Materials in Metal Casting Processes: A Critical Review and Future Possibilities Chadha U., Selvaraj S.K., Pant H., Arora A., Shukla D., Sancheti I., Chadha A., Srivastava D., Khanna M., Ram Kishore S., Paramasivam V. Advances in Materials Science and Engineering WOS 1687-8434 1.726
13 2022 SMEC Exploring Casting Defects of AA7075 Alloy in the Gravity Die Casting Simulation of an IC Engine Block Aneesh T., Pawan K., Mohan L., Hari Krishna P., Hotta T.K., Mohanty C.P., Gupta M. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering WOS 0954-4089 1.62
14 2022 SMEC A review of the function of using carbon nanomaterials in membrane filtration for contaminant removal from wastewater Chadha U., Selvaraj S.K., Vishak Thanu S., Cholapadath V., Abraham A.M., Zaiyan M M., Manoharan M., Paramsivam V. Materials Research Express WOS 2053-1591 1.62
15 2022 SMEC Modelling the strategies for improving maturity and resilience in medical oxygen supply chain through digital technologies K.E.K V., Nadeem S.P., Meledathu Sunil S., Suresh G., Sanjeev N., Kandasamy J. Journal of Global Operations and Strategic Sourcing SCOPUS 2398-5364 -
16 2022 SMEC Performance evaluation of 3D printing technologies: a review, recent advances, current challenges, and future directions Chadha U., Abrol A., Vora N.P., Tiwari A., Shanker S.K., Selvaraj S.K. Progress in Additive Manufacturing SCOPUS 2363-9512 -
17 2022 SMEC Simulation and experimental study on effect of surface residual stresses in dry orthogonal micro turning sample Kiran B., Nagaraju D. Australian Journal of Mechanical Engineering SCOPUS 1448-4846 -
18 2022 SMEC 3D-printable colloidal photonic crystals Liao J., Ye C., Guo J., Garciamendez-Mijares C.E., Agrawal P., Kuang X., Japo J.O., Wang Z., Mu X., Li W.,
 Ching T., Mille L.S., Zhu C., Zhang X., Gu Z., Zhang Y.S.
Materials Today WOS   31.041
19 2022 SMEC Advances in hydroxyapatite coatings on biodegradable magnesium and its alloys Zhang A.-M., Lenin P., Zeng R.-C., Kannan M.B. Journal of Magnesium and Alloys     10.088
20 2022 SMEC Performance analysis of nano- refrigerants used in the vapor compression refrigeration system using MATLAB-Simulink Katoch A., Razak F.A., Suresh A., BS B., Gundabattini E. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science WOS   1.762
21 2022 SMEC Complex Nanomaterials in Catalysis for Chemically Significant Applications: From Synthesis and Hydrocarbon Processing to Renewable Energy Applications Chadha U., Selvaraj S.K., Ashokan H., Hariharan S.P., Mathew Paul V., Venkatarangan V., Paramasivam V. Advances in Materials Science and Engineering WOS   1.726
22 2022 SMEC Nanomaterials for Electromagnetic Interference Shielding Applications: A Review Tiwari A., Tiwari A., Bhatia A., Chadha U., Kandregula S., Selvaraj S.K., Bhardwaj P. Nano WOS   1.556
23 2022 SMEC Critical analysis on the implementation barriers and consumer perception toward future electric mobility Chidambaram K., Ashok B., Vignesh R., Deepak C., Ramesh R., Narendhra T.M.V., Muhammad Usman K., Kavitha C. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering WOS   1.484
24 2022 SMEC Advantages of Taguchi Method compared to Response Surface Methodology for achieving the Best Surface Finish in Wire Electrical Discharge Machining (WEDM) Kandala A.V.U.K., Solomon D.G., Arulraj J.J. Journal of Mechanical Engineering SCOPUS   -
25 2022 SMEC Biofuel powered engine characteristics improvement through split injection parameter multivariate optimization with titanium based nano- particle additives Sathish Kumar T, Ashok B., Senthil Kumar M., Vignesh R., Saiteja P., Ramachandra Bhat Hire K., Harshal Tote M., Pandey R., Jadhav A., Gupta A., Rastogi D., Ayyasamy T. Fuel WOS 0016-2361 6.609
26 2022 SMEC Bioinspired Techniques in Freeze Casting: A Survey of Processes, Current Advances, and Future Directions Chadha U., Selvaraj S.K., Ravinuthala A.K., Maddini Y., Arasu K., Yadav S., Kumari O., Pant S., Paramasivam V. International Journal of Polymer Science WOS 1687-9422 2.642
27 2022 SMEC Progress on compatibility issues of alcohols on automotive materials: Kinetics, challenges and future prospects- a comprehensive review Muthuraman V.S (TRA-17222)., Patel A., Shreya V., Vaidyanathan A., Reshwanth K.N.G.L., Karthick C (TRA-16423)., Jacqueline P.J., Jan Gęca M., Ashok B., Sivagami K., Nanthagopal K. Process Safety and Environmental Protection WOS 0957-5820 7.926
28 2022 SMEC Resilience strategies to recover from the cascading ripple effect in a copper supply chain through project management K.E.K V., Nadeem S.P., Ravichandran M., Ethirajan M (TRA-14802)., Kandasamy J. Operations Management Research WOS 1936-9735 7.032
29 2022 SMEC Structural-Acoustic Response Analysis of Variable Stiffness Laminates with Inherent Material Damping Gunasekaran V., Gulhane S., Gupta S., Pitchaimani J., Rajamohan V., Manickam G. International Journal of Structural Stability and Dynamics WOS 0219-4554 2.558
30 2022 SMEC Investigation of graphene nanoplatelets- deposited textured metal matrix composite plates for improved mechanical properties: a numerical approach Singhal M., Jain A., Thomas B., Swain A. Journal of the Brazilian Society of Mechanical Sciences and Engineering WOS 1678-5878 2.361
31 2022 SMEC Review - Chemical Structures and Stability of Carbon-doped Graphene Nanomaterials and the Growth Temperature of Carbon Nanomaterials Grown by Chemical Vapor Deposition for Electrochemical Catalysis Reactions Chadha U., Sinha S., Jonna J., Goswami M., Ghani H., Nair K., Pandey N., Kataray T., Selvaraj S.K., Bhardwaj P., Banavoth M., Sonar P. ECS Journal of Solid State Science and Technology WOS 2162-8769 2.07
32 2022 SMEC Experimental and Mathematical Studies for Optimality of GTAW Parameters on Similar and Dissimilar Steel Substrates Kiran B., Nagaraju D., Selvaraj S.K., Molla B. Advances in Materials Science and Engineering WOS 1687-8434 2.098
33 2022 SMEC Experimental Investigation of Sorghum Stalk and Sugarcane Bagasse Hybrid Composite for Particleboard Adefris Legesse A., Desalegn D., Selvaraj S.K., Paramasivam V., Chadha U. Advances in Materials Science and Engineering WOS 1687-8435 2.098
34 2022 SMEC LES predictions of confinement effect on swirling flow generated by single helical axial swirler Rajesh M., Sivakumar R. Aircraft Engineering and Aerospace Technology WOS 0002-2667 0.975
35 2022 SMEC Experimental Modal Analysis of Radiator Fan Module to Predict its Influence of Structural Characteristics on Vibration and Noise Contribution Venugopal K., Halder P., Susarla V., Palanivelu S. International Journal of Engineering, Transactions B: Applications SCOPUS 1735-9244 -
36 2022 SMEC A Survey of Applications of MFC and Recent Progress of Artificial Intelligence and Machine Learning Techniques and Applications, with competing fuel cells Gyaneshwar A., Selvaraj S.K., Ghimire T., Mishra S.J., Gupta S., Chadha U., Manoharan M., Paramasivam V. Engineering Research Express SCOPUS 2631-8695 -
37 2022 SMEC Application of integrated environmentally failure modes and effects analysis and environmentally conscious quality function deployment for sustainable product design Vimal K.E.K., Mathiyazhagan K., Manojkummar M., Rajyalakshmi G., Rajan A.J., Kandasamy J. International Journal of Advanced Operations Management SCOPUS 1758-9398 -
38 2022 SMEC Investigating the effect of carbon tax on sharing network participation K.E.K V., Raja S., Yendeti V.S.P(17BME0457)., Kancharla A(17BME0828)., Kandasamy J. Journal of Modelling in Management SCOPUS 1746-5664 -
39 2022 SMEC A review of Thermal, Physical, electrical properties of spider silk and their experimental setups Maithani A., Sahni I., Joshi V.V. Materials Today: Proceedings SCOPUS 2214-7855 -
40 2022 SMEC Development of SS 304L composite coatings on mild steel substrate using friction surfacing and wear characterization Rajoria V., Nain G., Vijayan S., Prasad C.H., Damodaram R., Karthik G.M., Khan F. Materials Today: Proceedings SCOPUS 2214-7855 -
41 2022 SMEC Physical and mechanical characterization of marble Dust/Wheat straw fiber filled polymer composites Girge A., Goel V., Amish A., Gupta G. Materials Today: Proceedings SCOPUS 2214-7855 -
42 2022 SMEC Advances in forward osmosis (FO) technology for enhanced efficiency and output: A critical review Dsilva Winfred Rufuss D., Kapoor V., Arulvel S., Davies P.A. Journal of Cleaner Production SCOPUS 0959-6526 -
43 2022 SMEC Design and analysis of brake system for FSAE race car Gupta E., Bora D.K.S., Rammohan A. Engineering Research Express SCOPUS 2631-8695 -
44 2022 SMEC A Survey of Machine Learning in Friction Stir Welding, including Unresolved Issues and Future Research Directions Chadha U., Selvaraj S.K., Gunreddy N., Sanjay Babu S., Mishra S., Padala D., Shashank M., Mathew R.M., Kishore S.R., Panigrahi S., Nagalakshmi R., Kumar R.L., Adefris A. Material Design and Processing Communications WOS 2577-6576 -
45 2022 SMEC Current Trends and Future Perspectives of Nanomaterials in Food Packaging Application Chadha U., Bhardwaj P., Selvaraj S.K., Arasu K., Praveena S., Pavan A., Khanna M., Singh P., Singh S., Chakravorty A., Badoni B., Banavoth M., Sonar P., Paramasivam V. Journal of Nanomaterials WOS 1687-4129 3.791
46 2022 SMEC AI-driven techniques for controlling the metal melting production: A review, processes, enabling technologies, solutions, and research challenges Chadha U., Selvaraj S.K., Raj A., Mahanth T., Praveen Vignesh S.T., Lakshmi P.J., Samhitha K., Reddy N.B., Adefris A. Materials Research Express WOS 2053-1591 2.025
47 2022 SMEC A brief review on the Tube-to-Tube plate welding process Srivastava D., Chadha U., Gunreddy N., Saini N.K., Matara N.N., Machindar O., Mishra U.V., Khanna M., Ram Kishore S., Selvaraj S.K. Materials Today: Proceedings SCOPUS 2214-7853 -
48 2022 SMEC A comparative study on the thermal and dynamic analysis of a disc brake using Ansys Kalipada Sau S., George Pulinat K., Noel Moss P., Ranjeet P., Senthur Prabu S. Materials Today: Proceedings SCOPUS 2214-7853 -
49 2022 SMEC Investigation on thermal analysis of disc brake using Autodesk Fusion 360 Mugilan M., Devendra K.S., Danish M., Senthur Prabu S. Materials Today: Proceedings SCOPUS 2214-7853 -
50 2022 SMEC Transition to Electric Mobility in India: Barriers Exploration and Pathways to Powertrain Shift through MCDM Approach Ashok B., Kannan C., Usman K.M., Vignesh R., Deepak C., Ramesh R., Narendhra T.M.V., Kavitha C. Journal of The Institution of Engineers (India): Series C SCOPUS 2250-0545 -
51 2022 SMEC Computational AI models in VAT photopolymerization: a review, current trends, open issues, and future opportunities Sachdeva I., Ramesh S., Chadha U., Punugoti H., Selvaraj S.K. Neural Computing and Applications WOS 1433-3058 5.102
52 2022 SMEC A review on metal additive manufacturing for intricately shaped aerospace components Madhavadas V., Srivastava D., Chadha U., Aravind Raj S., Sultan M.T.H., Shahar F.S., Shah A.U.M. CIRP Journal of Manufacturing Science and Technology WOS 1755-5817 3.56
53 2022 SMEC Thermal buckling analysis of tapered laminated composite beam: Numerical and experimental investigation Arumugam A.B., Rajendra C.O., Edwin Sudhagar P., Rajamohan V., Kumbhar S.G., Perumal A. Polymer Composites WOS 1548-0569 3.531
54 2022 SMEC Prediction of split injection strategy assisted diesel engine combustion, performance and emission characteristics fuelled waste frying oil methyl ester through central composite design Dharmalingam B., Deepakkumar R., Bhattacharya K., Paulraj Gundupalli M., Sriariyanun M. Materials Today: Proceedings SCOPUS 2214-7853 -
55 2022 SMEC Numerical investigation of suction and blowing effects on fluid flow and heat transfer characteristics of solar air heater Nishidh N.B., Deepakkumar R. Materials Today: Proceedings SCOPUS 2214-7853 -
56 2022 SMEC Nanocellulose-based aerogel electrodes for supercapacitors: A review Nargatti K.I., Subhedar A.R., Ahankari S.S., Grace A.N., Dufresne A. Carbohydrate Polymers WOS 0144-8617 10.723
57 2022 SMEC Semantic Approach for Evaluation of Energy Storage Technologies under Fuzzy Environment Nagaraju D., Chiranjeevi C., Rajasekhar Y., Selvaraj S.K., Chadha U., Nagalakshmi R., Paramasivam V. Advances in Fuzzy Systems SCOPUS 1687-7101 -
58 2022 SMEC Machine learning-based CFD simulations: a review, models, open threats, and future tactics Panchigar D., Kar K., Shukla S., Mathew R.M., Chadha U., Selvaraj S.K. Neural Computing and Applications WOS 0941-0643 5.102
59 2022 SMEC Influence of CNT volume fractions on static and dynamic behavior of aluminum honeycomb-cored carbon-fiber- reinforced honeycomb sandwich structure Chandra S., Amulani A., Thomas S.B., Soni S.K., Thomas B. Journal of the Brazilian Society of Mechanical Sciences and Engineering WOS 1678-5878 2.361
60 2022 SMEC Directed Energy Deposition via Artificial Intelligence-Enabled Approaches Chadha U., Selvaraj S.K., Lamsal A.S., Maddini Y., Ravinuthala A.K., Choudhary B., Mishra A., Padala D., Shashank M., Lahoti V., Adefris A., Dhanalakshmi S. Complexity WOS 1076-2787 2.121
61 2022 SMEC Design, analysis and validation of a centralized shifting mechanism with an electrical actuator Kannan C., Agarwal S., Dighe H., Dash R.K. Engineering Research Express SCOPUS 2631-8695  -
62 2022 SMEC Feasibility of friction stir welding for in- space joining processes: a simulation- based experimentation Khanna M., Chadha U., Banerjee A., Singh R.P., Ghiridharan H., Narayanan D., Kataray T., Humrutha G., Selvaraj S.K., Dhanalakshmi S., Nagalakshmi R., Jayakumar K., Karthikeyan B. International Journal on Interactive Design and Manufacturing SCOPUS 1955-2513 -
63 2022 SMEC Comparative analysis of cross flow and jet impingement techniques of heat sink in electronics cooling Parthipan D., Rajagopal D. Materials Today: Proceedings SCOPUS 2214-7853 -
64 2022 SMEC Industrial internet of things in intelligent manufacturing: a review, approaches, opportunities, open challenges, and future directions Gupta P., Krishna C., Rajesh R., Ananthakrishnan A., Vishnuvardhan A., Patel S.S., Kapruan C., Brahmbhatt S., Kataray T., Narayanan D., Chadha U., Alam A., Selvaraj S.K., Karthikeyan B., Nagalakshmi R., Chandramohan V. International Journal on Interactive Design and Manufacturing SCOPUS 1955-2513 -
65 2022 SMEC Quality control tools and digitalization of real-time data in sustainable manufacturing Menon A.P., Lahoti V., Gunreddy N., Chadha U., Selvaraj S.K., Nagalakshmi R., Jayakumar K., Karthikeyan B. International Journal on Interactive Design and Manufacturing SCOPUS 1955-2513 -
66 2022 SMEC Sensitivity Analysis of Stationarity Tests' Outcome to Time Series Facets and Test Parameters Bawdekar A.A., Prusty B.R., Bingi K. Mathematical Problems in Engineering WOS 1026-7077 1.430
67 2022 SMEC Design, analysis and validation of a centralized shifting mechanism with an electrical actuator Kannan C., Agarwal S., Dighe H., Dash R.K. Engineering Research Express SCOPUS 2631-8695  -
68 2022 SMEC Thermal Analysis and Heat Management Strategies for an Induction Motor, a Review Madhavan S., P B R.D., Gundabattini E., Mystkowski A. Energies WOS 1996-1073 3.252
69 2022 SMEC Comparative analysis of cross flow and jet impingement techniques of heat sink in electronics cooling Parthipan D., Rajagopal D. Materials Today: Proceedings SCOPUS 2214-7853 -
70 2022 SMEC Industrial internet of things in intelligent manufacturing: a review, approaches, opportunities, open challenges, and future directions Gupta P., Krishna C., Rajesh R., Ananthakrishnan A., Vishnuvardhan A., Patel S.S., Kapruan C., Brahmbhatt S., Kataray T., Narayanan D., Chadha U., Alam A., Selvaraj S.K., Karthikeyan B., Nagalakshmi R., Chandramohan V. International Journal on Interactive Design and Manufacturing SCOPUS 1955-2513 -
71 2022 SMEC Quality control tools and digitalization of real-time data in sustainable manufacturing Menon A.P., Lahoti V., Gunreddy N., Chadha U., Selvaraj S.K., Nagalakshmi R., Jayakumar K., Karthikeyan B. International Journal on Interactive Design and Manufacturing SCOPUS 1955-2513 -
72 2022 SMEC Effect of thermal cyclic corrosion on the microstructural degradation of platinum aluminide coatings Rajamurugan G., Sathyajith S., Krishnasamy P. Surface Topography: Metrology and Properties WOS 2051-672X 2.185
73 2022 SMEC Conductive and convective heat transfer augmentation in flat plate solar collector from energy, economic and environmental perspectives — a comprehensive review Sharma A., Gunreddy N., Mulamalla A.R., Duraisamy S., Sivan S., Poongavanam G.K., Kumar B. Environmental Science and Pollution Research WOS 1614-749 5.190
74 2022 SMEC Comparative property analysis of fused filament fabrication PLA using fresh and recycled feedstocks Dash A., Kabra S., Misra S., Hrishikeshan G., Singh R.P., Patterson A.E., Chadha U., Rajan A.J., Hirpha B.B. Materials Research Express WOS 2053-1591 2.025
75 2022 SMEC Computational fluid dynamics–based parametric study on the performance of solar air heater channel Burye N.N., Sathyamurthy R., Rajagopal D. Environmental Science and Pollution Research WOS 1614-749 5.190
76 2022 SMEC Dynamic mechanical behavior of mono/synthetic-natural fiber composites—a review Krishnasamy P., Arvinda Pandian C.K., Rajamurugan G., Jayaraman T., Maniyambath A., Kesav Chandran J. Engineering Research Express SCOPUS 2631-8695 -
77 2022 SMEC An investigation on laser shot peened surfaces Karthikeyan S., Rajagopal D., Vamsikrishna Reddy K., Prashanth B., Mukesh Reddy B., Narayanan S., Jeeva P.A. Journal of Applied Research and Technology SCOPUS 1665-6423 -
78 2022 SMEC Thermal Analysis and Heat Management Strategies for an Induction Motor, a Review Madhavan S., P B R.D., Gundabattini E., Mystkowski A. Energies WOS 1996-1073 3.252
79 2022 SMEC Effect of thermal cyclic corrosion on the microstructural degradation of platinum aluminide coatings Rajamurugan G., Sathyajith S., Krishnasamy P. Surface Topography: Metrology and Properties WOS 2051-672X 2.185
80 2022 SMEC Comparative property analysis of fused filament fabrication PLA using fresh and recycled feedstocks Dash A., Kabra S., Misra S., Hrishikeshan G., Singh R.P., Patterson A.E., Chadha U., Rajan A.J., Hirpha B.B. Materials Research Express WOS 2053-1591 2.025
81 2022 SMEC Dynamic mechanical behavior of mono/synthetic-natural fiber composites—a review Krishnasamy P., Arvinda Pandian C.K., Rajamurugan G., Jayaraman T., Maniyambath A., Kesav Chandran J. Engineering Research Express SCOPUS 2631-8695 -
82 2022 SMEC An investigation on laser shot peened surfaces Karthikeyan S., Rajagopal D., Vamsikrishna Reddy K., Prashanth B., Mukesh Reddy B., Narayanan S., Jeeva P.A. Journal of Applied Research and Technology SCOPUS 1665-6423 -
83 2022 SMEC Numerical investigation on the performance and combustion characteristics of a cavity based scramjet combustor with novel strut injectors Yarasai S.S., Ravi D., Yoganand S., Raj Rajagopal T.K. International Journal of Hydrogen Energy WOS 0360-3199 7.139
  2022 SMEC Autonomous Braking System Using Linear Actuator Vaibhav R., Amutha Prabha N., Indragandhi V., Bharathidasan M., Vasantharaj S., Alaric J.S. Journal of Sensors WOS   2.336
457 2022 CIMR Effect of Ta addition on the sinterability of spark plasma sintered W-Ni-Fe alloy Muthuchamy A., Srikanth M., Yadav D.V., Raja Annamalai A. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture WOS 0954-4054 2.759
464 2022 SMEC Investigation of stress and tribological properties of dental composite materials using FEM Gupta A., Mohan I., Jude R.R., Suryawanshi A., Behera N. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology WOS 2041-305X 1.818
470 2022 SMEC Performance Evaluation of a Photovoltaic-Thermal Collector Coupled Stepped Solar Still for Indian Climatic Conditions Narang A., Roy S., Kataray T., Bonde V., Rajesh S., Chiranjeevi C., Chadha U., Hirpha B.B. Modelling and Simulation in Engineering SCOPUS 1687-5605 -
472 2022 SMEC Numerical investigations on the testing and selection of different phase change materials for peak load reduction in buildings of Indian climates Dhayanithi J., Gupta M.K., Hotta T.K., Das T. Materials Today: Proceedings SCOPUS 2214-7853 -
473 2022 SMEC Modeling and Simulation of Brake Disc Using Lightweight Materials Bheda T., Joshi D., Dinesh Kumar P.K., Darius Gnanaraj S. Journal of The Institution of Engineers (India): Series D SCOPUS 2250-2130 -
476 2022 SMEC Design and Development of Hot Vapour Polishing System and Optimization of It’s Process Parameters for FDM Printed Parts Kishore S.R., Mathew A., Tomy A.T., Sugavaneswaran M., John Rajan A. Tribology in Industry SCOPUS 0354-8996 -
478 2022 SMEC Mechanical properties of cellulose-based multiscale composites: A review Ganapathy V., Muthukumaran G., Sudhagar P.E., Rashedi A., Norrrahim M.N.F., Ilyas R.A., Goh K.L., Jawaid M., Naveen J. Polymer Composites WOS 0272-8397 3.531
484 2022 SMEC A concise approach to designing an intelligent welding station system platform Saicharan K., Sai M.K., Chandrasekhar P., Gopinath A., Selvaraj S.K. International Journal on Interactive Design and Manufacturing SCOPUS 1955-2513 -
485 2022 SMEC Green manufacturing via machine learning enabled approaches Raj A., Gyaneshwar A., Chadha U., Chadha A., Asija A., Abrol A., Priya S., Alam A., Joshi A., Bastola K., Selvaraj S.K., Karthikeyan B., Nagalakshmi R., Chandramohan V., Hadidi H. International Journal on Interactive Design and Manufacturing SCOPUS 1955-2513 -
1 2020 SMEC A compressive review on the effects of alcohols and nanoparticles as an oxygenated enhancer in compression ignition engine Nanthagopal K., Kishna R.S., Atabani A.E., AlMuhtaseb A.H., Kumar G., Ashok B. Energy Conversion and Management WOS 1968904 7.181
2 2020 SMEC Engine's behavior on hydrogen addition of waste cooking oil fueled light duty diesel engine - A dual fuel approach Raju P., Masimalai S.K., Ganesan N., Karthic S.V. Energy WOS 3605442 5.537
3 2020 SMEC Emission reduction in CI engine using biofuel reformulation strategies through nano additives for atmospheric air quality improvement Sheriff S.A., Kumar I.K., Mandhatha P.S., Jambal S.S., Sellappan R., Ashok B., Nanthagopal K. Renewable Energy WOS 9601481 5.439
4 2020 SMEC Experimental study on the effect of cetane improver with turpentine oil on CI engine characteristics Jeevanantham A.K., Madhusudan Reddy D., Goyal N., Bansal D., Kumar G., Kumar A., Nanthagopal K., Ashok B. Fuel WOS 162361 5.128
5 2020 SMEC On the numerical modelling and analysis of multi-directional functionally graded composite structures: A review Ghatage P.S., Kar V.R., Sudhagar P.E. Composite Structures WOS 2638223 4.829
6 2020 SMEC Novel welding of Al0.5CoCrFeNi highentropy alloy: Corrosion behavior Sokkalingam R., Sivaprasad K., Duraiselvam M., Muthupandi V., Prashanth K.G. Journal of Alloys and Compounds WOS  09258388 4.175
7 2020 SMEC Enhanced Channel Division Method for Estimation of Discharge in Meandering Compound Channe Mohanta A., Patra K.C., Pradhan A. Water Resources Management WOS 15731650 2.987
8 2020 SMEC Investigation of machinability characteristics and comparative analysis under different machining conditions for sustainable manufacturing Venkatesan K., Devendiran S., Sachin D., Swaraj J. Measurement: Journal of the International Measurement Confederation WOS 2632241 2.791
9 2020 SMEC Surface roughness evaluation of electrical discharge machined surfaces using wavelet transform of speckle line images Mahashar Ali J., Siddhi Jailani H., Murugan M. Measurement: Journal of the International Measurement Confederation WOS 2632241 2.791
10 2020 SMEC Detection of flood disaster system based on IoT, big data and convolutional deep neural network Anbarasan M., Muthu B., Sivaparthipan C.B., Sundarasekar R., Kadry S., Krishnamoorthy S., Samuel R.D.J., Dasel A.A Computer Communications WOS 1403664 2.766
11 2020 SMEC Thermal and cost analysis of various air filled double glazed reflective windows for energy efficient buildings Kirankumar G., Saboor S., Vali S.S., Mahapatra D., Talanki Puttaranga Setty A.B., Kim K.-H. Journal of Building Engineering WOS 23527102 2.378
12 2020 SMEC Gene-expression programming for the assessment of surface mean pressure coefficient on building surfaces Mallick M., Mohanta A., Kumar A., Patra K.C. Building Simulation WOS 19968744 2.238
13 2020 SMEC Nonlinear bending of porous curved beams reinforced by functionally graded nanocomposite graphene platelets applying an efficient shear flexible finite element approach Anirudh B., Ben Zineb T., Polit O., Ganapathi M., Prateek G. International Journal of Non-Linear Mechanics WOS 207462 2.225
14 2020 SMEC Parameter optimization and texture evolution in single point incremental sheet forming process Basak S., Prasad K.S., Mehto A., Bagchi J., Ganesh Y.S., Mohanty S., Sidpara A.M., Panda S.K. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture WOS 20412975 1.752
15 2020 SMEC Critical insight into biowaste-derived biocatalyst for biodiesel production Alrobaian A., Rajasekar V., Alagumalai A. Environmental Progress and Sustainable Energy WOS 19447450 1.596
16 2020 SMEC Prediction of Wind-Induced Mean Pressure Coefficients Using GMDH Neural Network Mallick M., Mohanta A., Kumar A., Charan Patra K. Journal of Aerospace Engineering WOS 19435525 1.373
17 2020 SMEC Experimental Investigation and Parametric Optimization on Hole Quality Assessment During Drilling of CFRP/GFRP/Al Stacks Janakiraman A., Pemmasani S., Sheth S., Kannan C., Balan A.S.S Journal of The Institution of Engineers (India): Series C Scopus 22500553  
18 2020 SMEC Fostering systematic eco-innovation in an industrial symbiosis environment using DEMATEL Jayakrishna K., Vimal K.E.K., Vibha M., Jain S., Kulatunga A.K. International Journal of Industrial and Systems Engineering Scopus 17485045  
19 2020 SMEC Powder additives influence on dielectric strength of EDM fluid and material removal Jeavudeen S., Jailani H.S., Murugan M. International Journal of Machining and Machinability of Materials Scopus 1748572X  
20 2020 SMEC Transient numerical analysis of thermophoresis and particle dynamics in a nanofluid – pool boiling conditions Karthikeyan C.P., Kalpana G., Krishnamoorthy V., Samuel A.A. Journal of Molecular Liquids WOS 1677322 4.561
21 2020 SMEC Immobilization of Cu3(btc)2 on graphene oxide-chitosan hybrid composite for the adsorption and photocatalytic degradation of methylene blue Samuel M.S., Suman S., Venkateshkannan, Selvarajan E., Mathimani T., Pugazhendhi A Journal of Photochemistry and Photobiology B: Biology WOS  10111344 4.067
22 2020 SMEC Realizing a novel friction stir processing-enabled FWTPET process for strength enhancement using firefly and pso methods Kumaran S.S., Kaliappan J., Srinivasan K., Hu Y.-C., Padmanaban S., Srinivasan N. Materials WOS 19961944 2.972
23 2020 SMEC IOT based wearable sensor for diseases prediction and symptom analysis in healthcare sector Muthu B.A., Sivaparthipan C.B., Manogaran G., Sundarasekar R., Kadry S., Shanthini A., Dasel A Peer-to-Peer Networking and Applications WOS 19366450 2.397
24 2020 SMEC Fabrication and Experimental Investigation on Deformation Behaviour of AlSi10Mg Foam-Filled Mild Steel Tubes Rajak D.K., Mahajan N.N., Selvaraj S.K. Transactions of the Indian Institute of Metals WOS 9751645 1.176
25 2020 SMEC Dendrite Morphological Analysis on SMA, GMA, and PGMA Welding of Dissimilar 304LN Austenitic Stainless Steel and Micro-alloyed Steel Rajamurugan G., Ghosh P.K., Prabu K., Dinesh D., Vinukumar S.M. Transactions of the Indian Institute of Metals WOS 9751645 1.176
26 2020 SMEC Modelling of sharing networks in the circular economy Jayakumar J., Jayakrishna K., K.E.K V., Hasibuan S. Journal of Modelling in Management Scopus 17465664  
27 2020 SMEC Enhancement of mechanical properties of alloy steel by GTAW with different purge/shielding gases Britto Joseph G., John Rajan A., Murugesan G., Prabhakaran R., Jeevahan J., Mageshwaran G. FME Transactions Scopus 2406128X  
28 2020 CBCMT Surface mechanical attrition treatment of low modulus Ti-Nb-Ta-O alloy for orthopedic applications Acharya S., Panicker A.G., Gopal V., Dabas S.S., Manivasagam G., Suwas S., Chatterjee K. Materials Science and Engineering C WOS 9284931 4.959
29 2020 SMEC Supersonic flutter study of porous 2D curved panels reinforced with graphene platelets using an accurate shear deformable finite element procedure Aditya S., Haboussi M., Shubhendu S., Ganapathi M., Polit O. Composite Structures WOS 2638223 4.829
30 2020 SMEC Study of machinability performance of Hastelloy-X for nanofluids, dry with coated tools Venkatesan K., Devendiran S., Nishanth Purusotham K., Praveen V.S. Materials and Manufacturing Processes WOS 15322475 3.35
31 2020 SMEC Effect of magnetic field intensity on deposition of copper tool in electro discharge deposition Muralidharan B., Singh P., Chelladurai H. Journal of Micromechanics and Microengineering WOS 13616439 2.141
32 2020 SMEC Formulation and characterization of folate receptor-targeted PEGylated liposome encapsulating bioactive compounds from Kappaphycus alvarezii for cancer therapy Baskararaj S., Panneerselvam T., Govindaraj S., Arunachalam S., Parasuraman P., Pandian S.R.K., Sankaranarayanan M., Mohan U.P., Palanisamy P., Ravishankar V., Kunjiappan S. 3 Biotech WOS 21905738 1.786
33 2020 SMEC A study on tribological behavior of Al4%Mg incorporated with MoS2 Senthil Kumar S., Sudhakara Pandian R., Pitchipoo P. Materials Research Express WOS 20531591 1.449
34 2020 SMEC Impact of instantaneous curvature on force and heat generation in manufacturing processes – a mathematical modelling Sreerag C., Gokul R., Vinaykumar J., Rajyalakshmi G. Engineering Computations (Swansea, Wales) WOS 2644401 1.246
35 2020 SMEC Investigations on tensile and flexural characteristics of fly ash and banana fiber-reinforced epoxy matrix composites Gopalan V., Sharma S.K., Jangid A.K., Pragasam V., Satonkar N., Chinnaiyan P. Engineering Transactions Scopus 24508071  
36 2020 CBCMT Effect of phase transformations during aging on tensile strength and ductility of metastable beta titanium alloy Ti– 35Nb–7Zr–5Ta-0.35O for orthopedic applications Vishnu J., Sankar M., Rack H.J., Rao N., Singh A.K., Manivasagam G. Materials Science and Engineering A WOS 9215093 4.081
37 2020 CBCMT Enhanced Biocorrosion Resistance and Cellular Response of a Dual-Phase High Entropy Alloy through Reduced Elemental Heterogeneity Perumal G., Grewal H.S., Pole M., Reddy L.V.K., Mukherjee S., Singh H., Manivasagam G., Arora H.S ACS Applied Bio Materials Scopus 25766422  
38 2020 SMEC Perovskite Solar Cells: A Porous Graphitic Carbon based Hole Transporter/Counter Electrode Material Extracted from an Invasive Plant Species Eichhornia Crassipes Pitchaiya S., Eswaramoorthy N., Natarajan M., Santhanam A., Asokan V., Madurai Ramakrishnan V., Rangasamy B., Sundaram S., Ravirajan P., Velauthapillai D. Scientific Reports WOS 20452322 4.011
39 2020 SMEC Microwave heating synthesis and thermoelectric property characterization of highly dense Ca3Co4O9 bulk Raja Annamalai A., Ravi Teja P., Agrawal D.K., Muthuchamy A. Ceramics International WOS 2728842 3.45
40 2020 SMEC Design, in silico modelling and functionality theory of folatereceptor-targeted myricetin-loaded bovine serum albumin nanoparticle formulation for cancer treatment Kunjiappan S., Govindaraj S., Parasuraman P., Sankaranarayanan M., Arunachalam S., Palanisamy P., Mohan U.P., Babkiewicz E., Maszczyk P., Vellaisamy S., Panneerselvam T. Nanotechnology WOS 13616528 3.399
41 2020 SMEC Role of method of synthesis on the size of flakes, dispersion stability and thermophysical properties of aqua based reduced graphene oxide nanofluids Dhanapal K., Raman M., Kamatchi R., Kumaresan G. Journal of Thermal Analysis and Calorimetry WOS 15882926 2.471
42 2020 SMEC Vibration and damping analysis of doubly curved viscoelastic-FGM sandwich shell structures using FOSDT Sahu N.K., Biswal D.K., Joseph S.V., Mohanty S.C. Structures WOS 23520124 1.646
43 2020 SMEC A review on methods to reduce weight and to increase efficiency of electric motors using lightweight materials, novel manufacturing processes, magnetic materials and cooling methods Solomon D.G., Greco A., Masselli C., Gundabattini E., Rassiah R.S., Kuppan R. Annales de Chimie: Science des Materiaux Scopus 19585934  
44 2020 SMEC Performance study of eco-friendly dielectric in EDM of AISI 2507 super duplex steel using Taguchifuzzy TOPSIS approach Srinivas Viswanth V., Ramanujam R., Rajyalakshmi G. International Journal of Productivity and Quality Management Scopus 17466474  
45 2020 SMEC Synthesis and machining characteristics of novel TiC ceramic and MoS2 soft particulate reinforced aluminium alloy 7075 matrix composites Dhulipalla A., Uday Kumar B., Akhil V., Zhang J., Lu Z., Park H.-Y., Jung Y.-G., Zhang J. Manufacturing Letters Scopus 22138463  
46 2020 CIMR Microstructure and mechanical properties of spark plasmasintered La2O3 dispersionstrengthened W–Ni–Fe alloy AyyappaRaj M., Yadav D., Agrawal D.K., Arunjunai Rajan R.A. Rare Metals WOS 10010521 1.785
47 2020 SMEC Investigating the microbial-influenced corrosion of UNS S32750 stainlesssteel base alloy and weld seams by biofilm-forming marine bacterium Macrococcus equipercicus Arun D., Vimala R., Devendranath Ramkumar K. Bioelectrochemistry WOS 15675394 4.474
48 2020 SMEC Development of multi-pass processed AA6082/SiCp surface composite using friction stir processing and its mechanical and tribology characterization Sivanesh Prabhu M., Elaya Perumal A., Arulvel S Surface and Coatings Technology WOS 2578972 3.192
49 2020 SMEC Theoretical and experimental studies to predict vibration responses of defects in spherical roller bearings using dimension theory Kumbhar S.G., Sudhagar P E., Desavale R.G. Measurement: Journal of the International Measurement Confederation WOS 2632241 2.791
50 2020 SMEC Ranking of Al-CSA composite by MCDM approach using AHP–TOPSIS and MOORA methods Raju S.S., Murali G.B., Patnaik P.K. Journal of Reinforced Plastics and Composites WOS 7316844 1.786
51 2020 SMEC Effect of inclusions on microstructure and mechanical behavior of multi-pass welded naval grade steel Venkatesh Kannan M., Arivazhagan N., Nageswara Rao M., Madhusudhan Reddy G. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications WOS 20413076 1.568
52 2020 SMEC Study of raw and chemically treated Sansevieria ehrenbergii fibers for brake pad application Senthil Kumaran S., Srinivasan K., Ponmariappan M., Yashwhanth S., Akshay S., Hu Y.-C. Materials Research Express WOS 20531591 1.449
53 2020 SMEC Characterization of New Cellulosic Cyrtostachys renda and Ptychosperma macarthurii Fibers from Landscaping Plants Loganathan T.M., Sultan M.T.H., Jawaid M., Ahsan Q., Naveen J., Perumal V. Journal of Natural Fibers WOS 1544046X 1.252
54 2020 SMEC Study of effect of linear tip relief modification in power transmission efficiency of spur gears Thamba N.B., Tambare A.M., Ananthanarayanan K.C., Duraiswamy R.P., Thangavelu S., Easwara Pillai R.K., Mangalaraja R.V. Archives of Acoustics WOS 1375075 0.899
55 2020 SMEC Parametric performance optimization of three sides roughened solar air heater Mohanty C.P., Behura A.K., Singh M.R., Prasad B.N., Kumar A., Dwivedi G., Verma P. Energy Sources, Part A: Recovery, Utilization and Environmental Effects WOS 15567230 0.894
56 2020 SMEC Investigations on Bending Characteristics of Soft Mesh Structure using Shape Memory Alloy Spring Towards Bio-Inspired Robotic Applications Muralidharan M., Brolin A., Mithun R., Patil R., Palani I.A. Iranian Journal of Science and Technology - Transactions of Mechanical Engineering WOS 22286187 0.727
57 2020 SMEC Effect-cause analysis and prediction convergence of random failure gate in a probabilistic competitive environment with case study on quality control process Choorikkat S., Gajjele R., Srinivas M.N., Murty A.V.S. Mathematical Modelling of Engineering Problems Scopus 23690747  
58 2020 SMEC Experimental Assessment of Effects of n-Butanol on Performance, Emission, and Combustion Characteristics of Mahua Oil Fueled Reactivity Controlled Compression Ignition (RCCI) Engine Ganesan N., Masimalai S., Ekambaram P., Selvaraju K. Emission Control Science and Technology Scopus 21993629  
59 2020 SMEC Influence of spent air confinement on pressure distribution over a flat plate impinged by an array of jets Patil N.G., Mujawar M.A., Biradar S.A., Adimurthy M., Katti V.V. International Journal of Ambient Energy Scopus 1430750  
60 2020 CIMR High temperature dry sliding wear behaviour of laser powder bed fused Inconel 718 Calvin Samuel. S., Arivarasu M., Ram Prabhu T. Additive Manufacturing WOS 22148604 7.173
61 2019 SMEC An investigation on CRDi engine characteristic using renewable orange-peel oil Ashok B., Nanthagopal K., Arumuga Perumal D., Babu J.M., Tiwari A., Sharma A. Energy Conversion and Management WOS 1968904 6.377
62 2019 SMEC Investigation on diethyl ether as an additive with Calophyllum Inophyllum biodiesel for CI engine application Nanthagopal K., Ashok B., Garnepudi R.S., Tarun K.R., Dhinesh B. Energy Conversion and Management WOS 1968904 6.377
63 2019 SMEC Functionally graded graphene reinforced porous nanocomposite curved beams: Bending and elastic stability using a higher-order model with thickness stretch effect Polit O., Anant C., Anirudh B., Ganapathi M. Composites Part B: Engineering WOS 13598368 4.92
64 2019 SMEC Effects of n-octanol as a fuel blend with biodiesel on diesel engine characteristics Ashok B., Nanthagopal K., Anand V., Aravind K.M., Jeevanantham A.K., Balusamy S. Fuel WOS 162361 4.908
65 2019 SMEC Study on decanol and Calophyllum Inophyllum biodiesel as ternary blends in CI engine Nanthagopal K., Ashok B., Saravanan B., Ramesh Pathy M., Sahil G., Ramesh A., Nurun Nabi M., Golam Rasul M. Fuel WOS 162361 4.908
66 2019 SMEC Study on isobutanol and Calophyllum inophyllum biodiesel as a partial replacement in CI engine applications Ashok B., Nanthagopal K., Saravanan B., Azad K., Patel D., Sudarshan B., Aaditya Ramasamy R. Fuel WOS 162361 4.908
67 2019 SMEC Investigation of thermo-elastic buckling of variable stiffness laminated composite shells using finite element approach based on higher-order theory Aditya Narayan D., Ganapathi M., Pradyumna B., Haboussi M. Composite Structures WOS 2638223 4.101
68 2019 CBCMT Axial Suspension Plasma Spraying: An ultimate technique to tailor Ti6Al4V surface with HAp for orthopaedic applications Hameed P., Gopal V., Bjorklund S., Ganvir A., Sen D., Markocsan N., Manivasagam G. Colloids and Surfaces B: Biointerfaces WoS 0927-7765 3.997
69 2019 CBCMT A review on injectable chitosan/beta glycerophosphate hydrogels for bone tissue regeneration Saravanan S., Vimalraj S., Thanikaivelan P., Banudevi S., Manivasagam G. International Journal of Biological Macromolecules WoS 0141-8130 3.909
70 2019 SMEC Degradation behavior of metastable β Ti-15-3 alloy for fastener applications Tiyyagura H.R., Kumari S., Mohan M.K., Pant B., Nageswara Rao M. Journal of Alloys and Compounds WOS  09258388 3.779
71 2019 SMEC Transient characteristics of fine powder flows within fluidized dense phase pneumatic conveying systems Alkassar Y., Agarwal V.K., Behera N., Jones M.G., Pandey R.K. Powder Technology WOS 325910 3.23
72 2019 SMEC Engine parameter optimization of palm oil biodiesel as alternate fuel in CI engine Kumar A.N., Kishore P.S., Raju K.B., Kasianantham N., Bragadeshwaran A. Environmental Science and Pollution Research WOS 16147499 2.8
73 2019 SMEC Evaluation of microclimates and assessment of thermal comfort of Panthera leo in the Masai Mara National Reserve, Kenya Ghosh S., Arvind D.G., Dobbie S. International Journal of Biometeorology WOS 14321254 2.577
74 2019 SMEC NOx emission reduction using permanent/electromagnet-based fuel reforming system in a compression ignition engine fueled with pine oil Thiyagarajan S., Edwin Geo V., Ashok B., Nanthagopal K., Vallinayagam R., Saravanan C.G., Kumaran P. Clean Technologies and Environmental Policy WOS 16189558 2.337
75 2019 SMEC Statistical analysis of different machining characteristics of EN-24 alloy steel during dry hard turning with multilayer coated cermet inserts Das A., Patel S.K., Hotta T.K., Biswal B.B. Measurement: Journal of the International Measurement Confederatio WOS 2632241 2.218
76 2019 SMEC Failure evaluation of SA 210C riffle water wall tubes in 70 MW CFBC boiler Senthur Prabu S., Choudhary A., Mittal N., Gupta S., Ramkumar D., Natarajan A. Engineering Failure Analysis WOS  13506307 2.157
77 2019 SMEC Effect of chilled air on delamination, induced vibration, burr formation and surface roughness in CFRP drilling: A comparative study Mannoj Rajkumar G., Bhardwaj D., Kannan C., Oyyaravelu R., Balan A.S.S. Materials Research Express WOS 20531591 1.151
78 2019 SMEC An investigation of mechanical properties of madar fiber reinforced polyester composites for various fiber length and fiber content Ganeshan P., Kumaran S.S., Raja K., Venkateswarlu D. Materials Research Express WOS 20531591 1.151
79 2019 SMEC CFD analysis of aerodynamic drag effects on Vacuum Tube Trains Gillani S.A., Panikulam V.P., Sadasivan S., Yaoping Z. Journal of Applied Fluid Mechanics WOS 17353645 1.09
80 2019 SMEC Hot Corrosion Studies on Detonation-Gun-Sprayed NiCrAlY and 80Ni–20Cr Coatings on Alloy X22CrMoV12-1 at 600 °C Subramani P., Padgelwar N., Shetty S., Pandit A., Sreenivasulu V., Arivazhagan N., Duoli W.U., Manikandan M. Transactions of the Indian Institute of Metals WOS 9751645 0.91
81 2019 SMEC Effect of Nickel Addition on Microstructure and Mechanical Properties of the Spark Plasma Sintered Ti–6Al–4V Alloy Muthuchamy A., Rajadurai M., Annamalai A.R., Agrawal D.K. Transactions of the Indian Institute of Metals WOS 9751645 0.91
82 2019 SMEC Effect of post-weld heat treatment on the microstructure and tensile properties of electron-beam-welded 21st century nickel-based super alloy 686 Arulmurugan B., Modi K., Sanjay A.P., Yashwant P.A., Rickwith N., Mohan C.G., Subramani P., Agilan M., Manikandan M., Arivazhagan N. Sadhana - Academy Proceedings in Engineering Sciences WOS 9737677 0.592
83 2019 SMEC Estimation of manufacturing systems degradation rate for residual life prediction through dynamic workload adjustment Manupati V.K., Panigrahi S., Ahsan M., Lahiri S., Chandra A., Thakkar J.J., Putnik G., Varela M.L.R. Sadhana - Academy Proceedings in Engineering Sciences WOS 9737677 0.592
84 2019 SMEC Design and fabrication of an automated seat pan and armrest height adjustable chair Sahu, M., Vijay, S.J., Masepogu Wilson Kumar, S., Gnanaraj, D. International Journal of Mechanical Engineering and Technology Scopus 09766359   
85 2019 SMEC Performance, combustion and emission characteristics of juliflora biodiesel fuelled DI diesel engine Asokan M.A., Senthur Prabu S., Bade P.K.K., Nekkanti V.M., Gutta S.S.G. Energy WOS 3605442 4.968
86 2019 SMEC Nonlinear axisymmetric dynamic buckling of functionally graded graphene reinforced porous nanocomposite spherical caps Haboussi M., Sankar A., Ganapathi M. Mechanics of Advanced Materials and Structures WOS 15376532 2.645
87 2019 SMEC Flexural properties of multiscale nanocomposites containing multiwalled carbon nanotubes coated glass fabric in epoxy/graphene matrix Mani A., Tambe P., Rahaman A. Composite Interfaces WOS 15685543 1.048
88 2019 SMEC Analysis of performance and emission characteristics of TBC coated low heat rejection engine Reddy G.V., Rasu N.G., Prasad T.H. International Journal of Ambient Energy Scopus 21628246  
89 2019 SMEC Dataset on optimization of EDM machining parameters by using central composite design Soundhar A., Zubar H.A., Sultan M.T.B.H.H., Kandasamy J. Data in Brief Scopus 23523409  
90 2019 SMEC Ergonomic design and RULA analysis of a motorised wheelchair for disabled and elderly Paul B.P., Darius Gnanaraj S., Paul S. International Journal of Mechanical Engineering and Technology Scopus 09766359   
91 2014 SMEC Re-designing door handles to reduce aerodynamic drag in road vehicles Gautham Ramchadran, Archana Nepak, Yagnavalkya Mukkamala, 32ns AIAA Applied Aerodynamics Conference      
92 2019 SMEC An experimental analysis on the effect of n-pentanol- Calophyllum Inophyllum Biodiesel binary blends in CI engine characteristcis Ashok B., Jeevanantham A.K., Nanthagopal K., Saravanan B., Senthil Kumar M., Johny A., Mohan A., Kaisan M.U., Abubakar S Energy WOS 3605442 4.968
93 2019 SMEC Comparative assessment of hexanol and decanol as oxygenated additives with calophyllum inophyllum biodiesel Ashok B., Nanthagopal K., Darla S., Chyuan O.H., Ramesh A., Jacob A., Sahil G., Thiyagarajan S., Geo V.E. Energy WOS 3605442 4.968
94 2019 SMEC Performance analysis of metal hydride based simultaneous cooling and heat transformation system Mohan M., Sharma M., Sharma V.K., Kumar E.A., Satheesh A., Muthukumar P. International Journal of Hydrogen Energy WOS 3603199 4.229
95 2019 SMEC A catholically pre-treated low cost screen-printed carbon electrode surface for metal compounds electrocatalyst like hydrogen evolution activity Chen Y.-J., Yang T.-H., Chang J.-L., Cheng W.- L., Kumar A.S., Zen J.- M. Journal of Electroanalytical Chemistry WOS 15726657 3.235
96 2019 SMEC Processing of titanium-based human implant material using wire EDM kumar S., Khan M.A., Muralidharan B. Materials and Manufacturing Processes WOS 15322475 2.669
97 2019 SMEC Effect of electromagnet-based fuelreforming system on high-viscous and Thiyagarajan S., Sonthalia A., Edwin Geo V., Ashok B., Nanthagopal K., Karthickeyan V., Dhinesh B. Journal of Thermal Analysis and Calorimetry WOS 15882926 2.209
low-viscous biofuel fueled in heavyduty CI engine
98 2019 SMEC Tribological performance evaluation of fused mullite-reinforced hybrid composite brake pad for defence application Vineeth Kumar V., Senthil Kumaran S., Dhanalakshmi S., Sivaramakrishnan R. Journal of the Brazilian Society of Mechanical Sciences and Engineering WOS 18063691 1.627
99 2019 SMEC Influence of alkaline treatment on improving mechanical properties of jute fiber-reinforced epoxy (LY556) composites Joseph G.B., Rajan A.J., Jeevahan J., Mageshwaran G. FME Transactions Scopus 2406128X  
100 2019 CBCMT Surface engineering of LENS-Ti-6Al4V to obtain nano- and micro-surface topography for orthopedic application A R., Das M., Balla V.K., D D., Sen D., Manivasagam G. Nanomedicine: Nanotechnology, Biology, and Medicine WOS  15499634 6.5
101 2019 ARC Performance analysis of a novel SOFC-HCCI engine hybrid system coupled with metal hydride reactor for H 2 addition by waste heat recovery Wu Z., Tan P., Zhu P., Cai W., Chen B., Yang F., Zhang Z., Porpatham E., Ni M. Energy Conversion and Management WOS 1968904 6.377
102 2019 SMEC Influence of hexanol as additive with Calophyllum Inophyllum biodiesel for CI engine applications Ramesh A., Ashok B., Nanthagopal K., Ramesh Pathy M., Tambare A., Mali P., Phuke P., Patil S., Subbarao R. Fuel WOS 162361 4.908
103 2019 SMEC Experimental investigations of ethanol blended biodiesel fuel on automotive diesel engine performance, emission and durability characteristics Kandasamy S.K., Selvaraj A.S., Rajagopal T.K.R. Renewable Energy WOS 9601481 4.9
104 2019 SMEC Structure-property evaluation of single pass Laser-arc hybrid welding of resulphurized martensitic stainless steel Ramkumar K.D., Dharmik K., Noronha B., Giri Mugundan K., Bhargav S., Phani Prabhakar K.V Journal of Materials Processing Technology WOS 9240136 3.647
105 2019 SMEC Influence of γ-alumina coating on surface properties of direct metal laser sintered 316L stainless steel Sharma G.S., Sugavaneswaran M., Vijayalakshmi U., Prakash R. Ceramics International WOS 2728842 3.057
106 2019 SMEC Dynamic characteristics of functionally graded graphene reinforced porous nanocomposite curved beams based on trigonometric shear deformation theory with thickness stretch effect Ganapathi M., Anirudh B., Anant C., Polit O. Mechanics of Advanced Materials and Structures WOS 15376532 2.645
107 2019 SMEC Reduction of wave drag on parameterized blunt bodies using spikes with varied tip geometries Mohandas S., Krishna Siddharth R., John B Acta Astronautica WOS 945765 2.227
108 2019 SMEC An investigation on tribological and electrical behaviour of conventional and microwave processed coppergraphite composites Ayyappadas C., Muthuchamy A., Kumar N.N., Agrawal D.K., Raja Annamalai A Materials Research Express WOS 20531591 1.151
109 2019 SMEC Comparative machining studies on custom 450 alloy with TiCN, TiAlN coated and uncoated carbide tools using Taguchi-Fuzzy logic approach Kumar T.S., Ramanujam R., Vignesh M., Rohith D., Manoj V., Sankar P.H. Materials Research Express WOS 20531591 1.151
110 2019 SMEC Structure-property correlations of WNi-Fe-Mo heavy alloys consolidated using spark plasma sintering Muthuchamy A., Yadev D., Agrawal D.K., Annamalai R. Materials Research Express WOS 20531591 1.151
111 2019 SMEC Determination of vibrational characteristics of coir, banana and Aloe vera fibres reinforced hybrid polymer matrix composites Vimal Anand S., Venkatachalam G., Nikam T.D., Jog O.V., Suryawanshi R.T. International Journal of Acoustics and Vibrations WOS 10275851 0.375
112 2019 SMEC Effect of Organic Modification on Multiwalled Carbon Nanotube Dispersions in Highly Concentrated Emulsions Bhagavathi Kandy S., Simon G.P., Cheng W., Zank J., Saito K., Bhattacharyya A.R. ACS Omega Scopus 24701343  
113 2019 SMEC Experimental investigation on diesel engine fuelled with hythane gas Kumma N., Gopidesi R.K., Rao T.R., Kumar K.M., Premkartikkumar S.R. International Journal of Mechanical Engineering and Technology Scopus 9766359  
114 2019 SMEC Vibration and damping characteristics of hybrid (glass- jute/ sisal/ hemp) fiber reinforced polymer matrix composites to protect environment by natural fiber Shankarganesh P.S.P., Muralikannan R., Venkatachalam G Journal of the Balkan Tribological Association Scopus 2094541  
115 2019 SMEC Modelling and analysis of strain hardening characteristics of sintered steel preforms under cold forging Rajeshkannan A., Narayan S., Jeevanantham A.K AIMS Materials Science Scopus 23720484  
116 2019 SMEC Experimental investigation on DMFCs using reduced noble metal loading with NiTiO 3 as supportive material to enhance cell performances Thiagarajan V., Karthikeyan P., Thanarajan K., Neelakrishnan S., Manoharan R., Chen R., Fly A., Anand R., Karuppa Raj T.R., Sendhil Kumar N. International Journal of Hydrogen Energy WOS 3603199 4.229
117 2019 SMEC A comprehensive analysis of porous graphene-reinforced curved beams by finite element approach using higherorder structural theory: Bending, vibration and buckling Anirudh B., Ganapathi M., Anant C., Polit O. Composite Structures WOS 2638223 4.101
118 2019 SMEC Modeling a pH-sensitive Zein-coacrylic acid hybrid hydrogels loaded 5- fluorouracil and rutin for enhanced anticancer efficacy by oral delivery Kunjiappan S., Theivendran P., Baskararaj S., Sankaranarayanan B., Palanisamy P., Saravanan G., Arunachalam S., Sankaranarayanan M., Natarajan J., Somasundaram B., Wadhwani A. 3 Biotech WOS 21905738 1.497
119 2019 SMEC Parameter optimization and texture evolution in single point incremental sheet forming process Basak S., Prasad K.S., Mehto A., Bagchi J., Ganesh Y.S., Mohanty S., Sidpara A.M., Panda S.K. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture WOS 20412975 1.445
120 2019 SMEC Vibration analysis of a carbon nanotube reinforced uniform and tapered composite beams Babu Arumugam A., Rajamohan V., Bandaru N., Sudhagar P.E., Kumbhar S.G. Archives of Acoustics WOS 2300262X 0.917
121 2019 SMEC Vibration Study on Aluminium Alloy 5083 Composite Reinforced with Montmorillonite Samuel Ratna Kumar P.S., Edwin Sudhagar P., John Alexis S., Subramani M. Transactions of the Indian Institute of Metals WOS 9751645 0.91
122 2019 SMEC Effect of Laser Shock Peening on Commercially Pure Titanium-1 Weldment Fabricated by Gas Tungsten Arc Welding Technique Varin S., Agarwal M., Chugh A., Manikandan M., Prabhakaran S., Kalainathan S., Shukla P., Lawrence J., Arivazhagan N. Transactions of the Indian Institute of Metals WOS 9751645 0.91
123 2019 SMEC Laser shock peening (LSP) to improve the metallurgical and mechanical properties of gas tungsten arc welding (GTAW) joints in hastelloy C-276 Nithin Joseph Reddy S.A., Prabhakaran S., Kalainathan S., Arivazhagan N., Manikandan M. Lasers in Engineering WOS 1029029X 0.305
124 2019 SMEC Identifying key success factors of sustainability in supply chain management for industry 4.0 using DEMATEL method Bhagawati M.T., Manavalan E., Jayakrishna K., Venkumar P. Lecture Notes in Mechanical Engineering Scopus 21954356  
125 2019 SMEC Simulated annealing algorithms to minimise the completion time variance of jobs in permutation flowshops Krishnaraj J., Pugazhendhi S., Rajendran C., Thiagarajan S. International Journal of Industrial and Systems Engineering Scopus 17485045  
126 2019 SMEC Evaluation of static abd dynamic characteristics of hydrodynamic spiral-grooved journal bearings using the CFD Matlapudi J.C., Gunti P.K., Sigatapu D.S., Behera N. Engineering Review Scopus 18490433  
127 2019 SMEC Musculoskeletal disorders and ergonomic risk factors in foundry workers Qureshi A., Manivannan K., Khanzode V., Kulkarni S. International Journal of Human Factors and Ergonomics Scopus 20457812  
128 2019 SMEC Effect of fuel injection strategies and EGR on biodiesel blend in a CRDI engine Bhowmick P., Jeevanantham A.K., Ashok B., Nanthagopal K., Perumal D.A., Karthickeyan V., Vora K.C., Jain A. Energy WOS 3605442 5.537
129 2019 SMEC Numerical and experimental investigation on 25 cm2 and 100 cm2 PEMFC with novel sinuous flow field for effective water removal and enhanced performance Vijayakrishnan M.K., Palaniswamy K., Ramasamy J., Kumaresan T., Manoharan K., Raj Rajagopal T.K., Maiyalagan T., Jothi V.R., Yi S.-C International Journal of Hydrogen Energy WOS 3603199 4.084
130 2019 SMEC Investigation of novel Pistacia khinjuk biodiesel in DI diesel engine with post combustion capture system Karthickeyan V., Ashok B., Nanthagopal K., Thiyagarajan S., Geo V.E. Applied Thermal Engineering WOS 13594311 4.026
131 2019 SMEC Influence of injection timing and exhaust gas recirculation (EGR) rate on lemon peel oil–fuelled CI engine Bragadeshwaran A., Kasianantham N., Kaisan M.U., Reddy D.M.S., Aravind K.M., Paul N., Ali I.M., Jose A., Chungath T. Environmental Science and Pollution Research WOS 16147499 2.914
132 2019 SMEC Metal bellow hydroforming using additive manufactured die: a case study Prithvirajan R., Sugavaneswaran M., Sathishkumar N., Arumaikkannu G Rapid Prototyping Journal WOS 13552546 2.801
133 2019 SMEC Development of a novel low carbon cementitious two stage layered fibrous concrete with superior impact strength Ramkumar V.R., Murali G., Asrani N.P., Karthikeyan K. Journal of Building Engineering WOS  23527102 2.378
134 2019 SMEC Optimization of bioactive compounds extraction assisted by microwave parameters from Kappaphycus alvarezii using RSM and ANFIS modeling Baskararaj S., Theivendren P., Palanisamy P., Kannan S., Pavadai P., Arunachalam S., Sankaranarayanan M., Mohan U.P., Ramasamy L., Kunjiappan S. Journal of Food Measurement and Characterization WOS 21934134 1.415
135 2019 CIMR Tribological Behaviour of GraphiteReinforced FeNiCrCuMo High-Entropy Alloy Self-Lubricating Composites for Aircraft Braking Energy Applications Prabhu T.R., Arivarasu M., Chodancar Y., Arivazhagan N., Sumanth G., Mishra R.K Tribology Letters WOS 15732711 2.235
136 2019 CBCMT Role of aging induced α precipitation on the mechanical and tribocorrosive performance of a β Ti-Nb-Ta-O orthopedic alloy Acharya S., Bahl S., Dabas S.S., Hassan S., Gopal V., Panicker A.G., Manivasagam G., Suwas S., Chatterjee K. Materials Science and Engineering C WOS 9284931 4.959
137 2019 SMEC Optimisation of EGR and SOI for better combustion characteristics using response surface methodology Ganji P.R., Chowdary Putta K.B., Kattela S.P., Raju V.R.K., Srinivasa Rao S. International Journal of Ambient Energy Scopus 21628246  
138 2019 SMEC Impact of addition of two ether additives with high speed dieselCalophyllum Inophyllum biodiesel blends on NOx reduction in CI engine Jeevanantham A.K., Nanthagopal K., Ashok B., Al-Muhtaseb A.H., Thiyagarajan S., Geo V.E., Ong H.C., Samuel K.J. Energy WOS 3605442 5.537
139 2019 SMEC Effect of low energy laser shock peening on the mechanical integrity of Hastelloy C-276 weld Devendranath Ramkumar K., Narenthiran A., Konjenti A., Pravin P.N., Kanish T.C. Journal of Materials Processing Technology WOS 9240136 4.178
140 2019 SMEC Experimental investigation on DMFCs using reduced noble metal loading with NiTiO3 as supportive material to enhance cell performances Thiagarajan V., Karthikeyan P., Thanarajan K., Neelakrishnan S., Manoharan R., Chen R., Fly A., Anand R., Karuppa Raj T.R., Sendhil Kumar N. International Journal of Hydrogen Energy WOS 3603199 4.084
141 2019 SMEC Experimental study and Shannon entropy analysis of pressure fluctuations and flow mode transition in fluidized dense phase pneumatic conveying of fly ash Alkassar Y., Agarwal V.K., Pandey R.K., Behera N. Particuology WOS 16742001 2.616
142 2019 SMEC Integrated process planning and scheduling in networked manufacturing systems for I4.0: a review and framework proposal Varela M.L.R., Putnik G.D., Manupati V.K., Rajyalakshmi G., Trojanowska J., Machado J. Wireless Networks WOS 4444 2.405
143 2019 SMEC Comparative analysis of particle size on the mechanical and metallurgical characteristics of Al2O3-reinforced sintered and extruded AA2014 nanohybrid composite Senthil Kumar R., Prabu K., Rajamurugan G., Ponnusamy P Journal of Composite Materials WOS 1530793X 1.755
144 2019 SMEC Energy Addition-Based Virtual Cowl for Performance Enhancement of Scramjet Intake John B., Vijapuri D., Thota B., Katoch N. Journal of Aerospace Engineering WOS 19435525 1.373
145 2019 SMEC WEDM Parameter Optimization for Silicon@r-GO/Magneisum Composite Using Taguchi Based GRA Coupled PCA Kavimani V., Prakash K.S., Thankachan T., Nagaraja S., Jeevanantham A.K., Jhon J.P Silicon WOS 18769918 1.21
146 2019 SMEC Effect of Fluidized Bed Processing on Performance of 354 Aluminum Compressor Wheels Produced by Counter-Gravity Casting Dinesh Babu G., Nageswara Rao M. Transactions of the Indian Institute of Metals WOS 9751645 1.176
147 2019 SMEC Influence of calcium sulfate whiskers on the tribological characteristics of automotive brake friction materials Sudhan Raj J., Christy T.V., Darius Gnanaraj S., Sugozu B Engineering Science and Technology, an International Journal Scopus 22150986  
148 2019 SMEC Application of value stream mapping for cycle time reduction in production of link and roller assembly Manupati V.K., Gangal C., Varela M.L.R., Mobin M. International Journal of Services and Operations Management Scopus 17442389  
149 2019 SMEC Hot deformation of 18 % Ni maraging steels – A review Nageswara Rao M., Narayana Murty S.V.S Materials Performance and Characterization Scopus  21653992  
150 2019 CBCMT Hydrothermal treatment of etched titanium: A potential surface nanomodification technique for enhanced biocompatibility Vishnu J., K Manivasagam V., Gopal V., Bartomeu Garcia C., Hameed P., Manivasagam G., Webster T.J. Nanomedicine: Nanotechnology, Biology, and Medicine WOS  15499634 5.57
151 2019 SMEC Simultaneous reduction of NOx and smoke emissions with low viscous biofuel in low heat rejection engine using selective catalytic reduction technique Karthickeyan V., Thiyagarajan S., Geo V.E., Ashok B., Nanthagopal K., Chyuan O.H., Vignesh R Fuel WOS 162361 5.128
152 2019 SMEC Large amplitude free flexural vibrations of functionally graded graphene platelets reinforced porous composite curved beams using finite element based on trigonometric shear deformation theory Aditya Narayan D., Ben Zine T., O.Polit, Pradyumna B., Ganapathi M., International Journal of Non-Linear Mechanics WOS 207462 2.225
153 2019 SMEC Tolerance Analysis in Selective Assembly of Multiple Component Features to Control Assembly Variation Using Matrix Model and Genetic Algorithm Jeevanantham A.K., Chaitanya S.V., Rajeshkannan A International Journal of Precision Engineering and Manufacturing WOS  20054602 1.779
154 2019 SMEC Friction based joining process for high strength aerospace aluminium alloy Nithin Joseph Reddy S.A., Sathiskumar R., Gokul Kumar K., Jerome S., Vinoth Jebaraj A., Arivazhagan N., Manikandan M. Materials Research Express WOS 20531591 1.449
155 2019 SMEC Weld bead temperature and residual stresses evaluations in multipass dissimilar INCONEL625 and SS316L by GTAW using IR thermography and x-ray diffraction techniques Vemanaboina H., Edison G., Akella S. Materials Research Express WOS 20531591 1.449
156 2019 SMEC Damage Assessment and Remediation of an Iconic Lime Rendered Building Façade: The Safed Baradari Story Ghosh S., Vardhan V., Rajhans P International Journal of Architectural Heritage WOS 15583066 1.44
157 2019 SMEC An investigation on CI engine characteristics using pork lard methyl ester at various injection pressures and injection timings Ashok B., Nanthagopal K., Senthil Kumar M., Ramasamy A., Patel D., Balasubramanian S., Balakrishnan S. International Journal of Green Energy WOS 15435083 1.302
158 2019 SMEC Experimental investigations on the influence of hydrogen and LPG mixtures on performance behavior of a mahua bio oil-powered dual fuel engine Karthic S.V., Senthil Kumar M., Nataraj G., Pradeep P International Journal of Green Energy WOS 15435083 1.302
159 2019 SMEC Thermal performance augmentation of a solar flat plate collector using the shot peening technique Poongavanam G.K., Sakthivadivel D., Meikandan M., Balaji K., Vigneswaran V.S Science and Technology for the Built Environment WOS 2374474X 1.199
160 2019 SMEC Consequences of exhaust gas temperature on emissions in CI engine fuelled with Calophyllum inophyllum methyl ester blends with diesel Kumar L.S., Bapu B.R.R., Prakash R. Progress in Industrial Ecology Scopus 14788764  
161 2019 SMEC Dynamic analysis of functionally graded shaft Dey K., Verlekar J.R., Soni S.K., Thomas B. FME Transactions Scopus 2406128X  
162 2019 SMEC Effect of electroplating on surface roughness and dimension of FDM parts at various build orientations Sugavaneswaran M., Prince M.T., Azad A. FME Transactions Scopus 2406128X  
163 2019 SMEC Influence of thermo-electrical property of materials on Powder Mixed Electrical Discharge Machining Jeavudeen S., Siddhi Jailani H., Murugan M. FME Transactions Scopus 2406128X  
164 2019 SMEC Vernacular architecture as an idiom for promoting cultural continuity in South Asia with a special reference to Buddhist monasteries Ghosh S., Goenka A., Deo M., Mandal D. AI and Society Scopus 14355655  
165 2019 SMEC Comprehensive review of Calophyllum inophyllum as a feasible alternate energy for CI engine applications Vigneshwar V., Krishnan S.Y., Kishna R.S., Srinath R., Ashok B., Nanthagopal K. Renewable and Sustainable Energy Reviews WOS 13640321 10.556
166 2019 SMEC Investigation on pilot injection with low temperature combustion of Calophyllum inophyllum biodiesel fuel in common rail direct injection diesel engine Susanth Kishna R., Nanthagopal K., Ashok B., Srinath R., Pranava Kumar M., Bhowmick P. Fuel WOS 162361 5.128
167 2019 SMEC Synthesis and characterization of hydrogenated novel AlCrFeMnNiW high entropy alloy Dewangan S.K., Sharma V.K., Sahu P., Kumar V. International Journal of Hydrogen Energy WOS 3603199 4.084
168 2019 SMEC Effect of low concentration hollow glass microspheres on mechanical and thermomechanical properties of epoxy composites Imran M., Rahaman A., Pal S. Polymer Composites WOS 15480569 2.268
169 2019 SMEC Selective laser melting of 316L stainless steel: Influence of TiB2 addition on microstructure and mechanical properties Salman O.O., Gammer C., Eckert J., Salih M.Z., Abdulsalam E.H., Prashanth K.G., Scudino S. Materials Today Communications WOS 23524928 1.859
170 2019 SMEC Microstructure Evolution, Structural Integrity, and Hot Corrosion Performance of Nitrogen-Enhanced Stainless Steel Welds Devendranath Ramkumar K., Mehta N., Shukla S., Parameswar P., Jaya Surya V., Rishi Bharadwaj R., Nikam P., Chen X. Journal of Materials Engineering and Performance WOS 15441024 1.476
171 2019 SMEC Evaluating the mechanical characteristics of aluminium alloy 2285 processed by friction stir processing Jeyapandiarajan P., Joel J., Pramesh P., Dugar N., Chandok S., Anthony Xavior M. Materials Research Express WOS 20531591 1.449
172 2019 SMEC Impact of BaSO4 filler on woven Aloevera/Hemp hybrid composite: Dynamic mechanical analysis Arulmurugan M., Prabu K., Rajamurugan G., Selvakumar A.S. Materials Research Express WOS 20531591 1.449
173 2019 SMEC Effect of Cobalt Addition on the Morphology and Mechanical Properties of W-Ni-Cu-Co Alloy Senthilnathan N., Raja Annamalai A., Venkatachalam G. Emerging Materials Research WOS 20460155 0.33
174 2019 SMEC Effect of using low-cost thermal insulation material in a solar air heating system with a shot blasted Vcorrugated absorber plate Ganesh Kumar P., Balaji K., Sakthivadivel D., Vigneswaran V.S., Meikandan M., Velraj R Thermal Science and Engineering Progress Scopus 24519049  
175 2019 SMEC Mechanical behaviour of areca nut, sunn hemp natural fibers and E-glass fibers reinforced with epoxy composites Babu T.N., Kuclourya T., Jain M.K., Mangalaraja R.V. International Journal of Engineering and Advanced Technology Scopus  22498958  
176 2019 SMEC Experimental study on thermal properties and electrical conductivity of stabilized H2O-solar glycol mixture based multi-walled carbon nanotube nanofluids: developing a new correlation Ganesh Kumar P., Sakthivadivel D., Meikandan M., Vigneswaran V.S., Velraj R. Heliyon Scopus 24058440  
177 2019 SMEC Failure analysis of strap joint Shinde M.R., S.chavan U., Deshmukh K.P. International Journal of Innovative Technology and Exploring Engineering Scopus 22783075  
178 2018 SMEC Molten salt reactors and their development Saraf N., Devarajan A., Mokashi S.S., Rao G., Dalal V., Premkartikkumar S.R. International Journal of Mechanical and Production Engineering Research and Development Scopus 22498001  
over the years - a review
179 2018 SMEC Effects of water diesel emulsion on diesel Datta Sai K., Gopidesi R.K., Premkartikkumar S.R., Nagarjuna K. International Journal of Mechanical and Production Engineering Research and Development Scopus 22498001  
engine
180 2018 SMEC Influence of sintering temperature on Muthuchamy A., Patel P., Rajadurai M., Materialpruefung/Materials Testing WOS 2195-8572  
mechanical properties of spark plasma sintered prealloyed Ti-6Al-4 v powder Chaurisiya J.K., Annamalai A.R.
181 2018 SMEC Microstructural Evolution of Iron Based Alloys Produced by Spark Plasma Sintering Method Muthuchamy A., Annamalai A.R., Physics of Metals and Metallography WOS 0031918X 0.636
Karthikeyan M., Thakur A., Nagaraju N., Agrawal D.K.
182 2018 SMEC Assessment of drilling-induced damage in CFRP under chilled air environment Abish J., Samal P., Narenther M.S., Materials and Manufacturing Processes WOS 1532-2475 1.943
Kannan C., Balan A.S.S.
183 2018 SMEC Effect of La<inf>2</inf>O<inf>3</inf> addition and sintering mode on the mechanical properties and microstructural evolution on an 8YSZ ceramic alloy Muthuchamy, A., Nagaraju, N., Agrawal, Ceramics International WOS 0272-8842 2.274
D.K., Annamalai, A.R.
184 2018 SMEC Biochemical responses from biomass of isolated Chlorella sp., under different cultivation modes: Non-linear modelling of growth kinetics Praveen K., Abinandan S., Natarajan R., Kavitha M.S. Brazilian Journal of Chemical Engineering WOS 1046632 0.925
185 2018 SMEC In-situ electrochemical immobilization of [Mn(bpy)2(H2O)2]2+ complex on MWCNT modified electrode and its electrocatalytic H2O2 oxidation and reduction reactions: A Mn-Pseudocatalase enzyme bio-mimicking electron-transfer functional model Saravanan N., Mayuri P., Huang S.-T., Kumar A.S. Journal of Electroanalytical Chemistry WOS 15726657 3.012
186 2018 SMEC A new organic redox species-indole tetraone trapped MWCNT modified electrode prepared by in-situ electrochemical oxidation of indole for a bifunctional electrocatalysis and simultaneous flow injection electroanalysis of hydrazine and hydrogen peroxide Mayuri P., Huang S.-T., Mani V., Kumar A.S. Electrochimica Acta WOS 134686 4.798
187 2018 SMEC Selective electrochemical polymerization of 1-napthylamine on carbon electrodes and its pH sensing behavior in non-invasive body fluids useful in clinical applications Vishnu N., Kumar A.S., Pan G.-T., Yang T.C.-K. Sensors and Actuators, B: Chemical WOS 0925-4005 5.667
188 2018 SMEC Detoxification of dyes by aspergillus Niger isolated from dye contaminated soil effluent from the sites of textile industry Ranjitha J., Shalini P., Anand M., Raghavendra S.G. Research Journal of Chemistry and Environment Scopus 9720626  
189 2018 SMEC Biodiesel production from waste animal fat using a novel catalyst HCA immobilized AuNPS amine grafted SBA-15 Srinivasan G.R., Palani S., Jambulingam R. Journal of Engineering Science and Technology Scopus 18234690  
190 2018 SMEC Experimental investigation of mixed convection and surface radiation heat transfer from protruding discrete heat sources mounted on a vertical channel Hotta T.K., Harsha P.S., Venkateshan S.P. Heat Transfer Research WOS 2162-6561 0.404
191 2018 SMEC Microstructural and electrochemical behaviour of aluminium alloy composites produced using different sintering techniques Muthuchamy A., Annamalai A.R., Acharyya S.G., Nagaraju N., Agrawal D.K. Materials Research WOS 15161439 0.634
192 2018 SMEC ENHANCEMENT of EXFOLIATION CORROSION RESISTANCE of ALUMINIUM ALLOY 5083 by SHOT PEENING Jebaraj A.V., Ajaykumar L., Deepak C.R., Aditya K.V.V. Surface Review and Letters WOS 0218625X 0.734
193 2018 SMEC Effect of particle size distribution on rheology of high concentration limestone–water slurry for economic pipeline transportation Senapati S., Pothal J.K., Mohanty A. Particulate Science and Technology WOS ‎0272-6351 0.784
194 2018 SMEC Studies on testing and modelling of formability in aluminium alloy sheet forming Subramani K., Alagarsamy S.K., Chinnaiyan P., Chinnaiyan S.N. Transactions of Famena WOS 13331124 0.797
195 2018 SMEC Application of EMD ANN and DNN for self-aligning bearing fault diagnosis Narendiranath Babu T., Aravind A., Rakesh A., Jahzan M., Rama Prabha D. Archives of Acoustics WOS 0137-5075 0.917
196 2018 SMEC Characterization of microfiber isolated from Hibiscus sabdariffa var. altissima fiber by steam explosion Karakoti A., Biswas S., Aseer J.R., Sindhu N., Sanjay M.R. Journal of Natural Fibers WOS 15440478 0.974
197 2018 SMEC Mesoscopic analysis of heatline and massline during double-diffusive MHD natural convection in an inclined cavity Sathiyamoorthi A., Anbalagan S. Chinese Journal of Physics WOS 5779073 1.051
198 2018 SMEC Co-combustion analysis of lignite coal and groundnut shell using TGA Sakthivel C., Gopal P., Rameshkumar C., Suresh Kumar B. Journal of Applied Fluid Mechanics WOS 17353572 1.09
199 2018 SMEC Dynamic characterization of the thickness-tapered laminated plant fiber-reinforced polymer composite plates Suthenthiraveerappa V., Gopalan V., Arumugam A.B., Ramasamy B. Advanced Composite Materials WOS ‎0924-3046 1.124
200 2018 SMEC Analysis of structure property relationship of super duplex stainless steel AISI 2507 weldments for severe corrosive environments Paranthaman V., Shanmuga Sundaram K., Jebaraj A.V. Materials Research Express WOS 20531591 1.151
201 2018 SMEC The role of perceived benefits and personality traits on mobile instant messaging users’ responses Padmavathy, C., Lee, S., Pattusamy, M., Dey, M.K., Swapana, M. Asia Pacific Journal of Marketing and Logistics WOS 1355-5855 1.204
202 2018 SMEC Dynamic behaviour of woven bio fiber composite Rajesh M., Sultan M.T.H., Uthayakumar M., Jayakrishna K., Shah A.U.M. BioResources WOS 19302126 1.321
203 2018 SMEC Influence of Exhaust Gas Recirculation on Combustion and Emission Characteristics of Diesel Engine Fuelled with 100% Waste Cooking Oil Methyl Ester Nanthagopal K., Raj R.T.K., Ashok B., Elango T., Saravanan S.V. Waste and Biomass Valorization WOS 1877-2641 1.337
204 2018 SMEC Toward the design of interstitial nonmetals co-doping for Mg-based hydrides as hydrogen storage material Wu Z., Zhu L., Yang F., Nyamsi S.N., Porpatham E., Zhang Z. Journal of Materials Research WOS 8842914 1.495
205 2018 SMEC Concentrated energy addition for active drag reduction in hypersonic flow regime Ashwin Ganesh M., John B. Acta Astronautica WOS 945765 1.536
206 2018 SMEC Austenite reversion in 18% Ni maraging steel and its weldments Rohit B., Muktinutalapati N.R. Materials Science and Technology (United Kingdom) WOS 2670836 1.538
207 2018 SMEC Liquid – Liquid horizontal pipe flow – A review Ahmed S.A., John B. Journal of Petroleum Science and Engineering WOS 9204105 1.873
208 2018 SMEC Thermoelastic Stability Behavior of Curvilinear Fiber-Reinforced Composite Laminates With Different Boundary Conditions Manickam G., Bharath A., Das A.N., Chandra A., Barua P. Polymer Composites WOS 2728397 1.943
209 2018 SMEC Nonlinear Free Flexural Vibration of Curvilinear Fibre Composite Laminates Using a Higher-Order Element Ganapathi M., Venkatachari A., Haboussi M., Mathew A.T. International Journal of Structural Stability and Dynamics WOS 2194554 2.082
210 2018 SMEC Semi-active vibration control of an 8x8 armored wheeled platform Trikande M.W., Karve N.K., Anand Raj R., Jagirdar V.V., Vasudevan R. JVC/Journal of Vibration and Control WOS 10775463 2.101
211 2018 SMEC Elastic stability of curved nanobeam based on higher-order shear deformation theory and nonlocal analysis by finite element approach Polit O., Merzouki T., Ganapathi M. Finite Elements in Analysis and Design WOS ‎0168-874X 2.161
212 2018 SMEC Experimental study on effect of wick structures on thermal performance enhancement of cylindrical heat pipes Kumaresan, G., Vijayakumar, P., Ravikumar, M., Kamatchi, R., Selvakumar, P. Journal of Thermal Analysis and Calorimetry WOS 1388-6150 2.209
213 2018 SMEC Investigation of TiAlN coated roller burnishing on Al-(B4C)p MMC workpiece material Shankar E., Balasivanandha Prabu S., Kumar T.S., John M.R.S. Materials and Manufacturing Processes WOS 1042-6914 2.274
214 2018 SMEC Comparative evaluation of performances of TiAlN, AlCrN, TiAlN/AlCrN coated carbide cutting tools and uncoated carbide cutting tools on turning Inconel 825 alloy using Grey Relational Analysis T. S.K., Ramanujam R., Vignesh M., Tamiloli N., Sharma N., Srivastava S., Patel A. Sensors and Actuators, A: Physical WOS ‎0924-4247 2.311
215 2018 SMEC Development of improved microstructural traits and mechanical integrity of stabilized stainless steel joints of AISI 321 Devendranath Ramkumar K., Pavan B., Chandrasekar V. Journal of Manufacturing Processes WOS 1526-6125 2.322
216 2018 SMEC A nonlocal higher-order model including thickness stretching effect for bending and buckling of curved nanobeams Ganapathi M., Polit O. Applied Mathematical Modelling WOS 0307904X 2.35
217 2018 SMEC An effective hybrid multi objective evolutionary algorithm for solving real time event in flexible job shop scheduling problem Sreekara Reddy M.B.S., Ratnam C., Rajyalakshmi G., Manupati V.K. Measurement: Journal of the International Measurement Confederation WOS 0263-2241 2.359
218 2018 SMEC Investigations on performance characteristics of GFRP composites in milling Prasanth I.S.N.V.R., Ravishankar D.V., Hussain M.M., Badiganti C.M., Sharma V.K., Pathak S. International Journal of Advanced Manufacturing Technology WOS 2683768 2.601
219 2018 SMEC Experimental investigation of IN725 under different cooling environments using new tool holder Gupta S., Venkatesan K., Devendiran S., Mathew A.T. Materials and Manufacturing Processes WOS 10426914 2.669
220 2018 SMEC Mitigation of NOx and smoke emissions in a diesel engine using novel emulsified lemon peel oil biofuel Bragadeshwaran A., Kasianantham N., Balusamy S., Muniappan S., Reddy D.M.S., Subhash R.V., Pravin N.A., Subbarao R. Environmental Science and Pollution Research WOS 9441344 2.8
221 2018 SMEC Experimental study of methyl tert-butyl ether as an oxygenated additive in diesel and Calophyllum inophyllum methyl ester blended fuel in CI engine Bragadeshwaran A., Kasianantham N., Ballusamy S., Tarun K.R., Dharmaraj A.P., Kaisan M.U. Environmental Science and Pollution Research WOS 9441344 2.8
222 2018 SMEC Dynamic characterization and parametric instability analysis of rotating magnetorheological fluid composite sandwich plate subjected to periodic in-plane loading Arumugam A.B., Ramamoorthy M., Rajamohan V., S M., S R.K. Journal of Sandwich Structures and Materials WOS 1099-6362 2.933
223 2018 SMEC A multi-criteria decision making approach for the urban renewal in Southern India Manupati V.K., Ramkumar M., Samanta D. Sustainable Cities and Society WOS 22106707 3.073
224 2018 SMEC Microstructure and mechanical properties of spark plasma sintered tungsten heavy alloys Senthilnathan N., Annamalai A.R., Venkatachalam G. Materials Science and Engineering A WOS 0921-5093 3.094
225 2018 SMEC A novel approach to predict the delamination factor for dry and cryogenic drilling of CFRP Joshi S., Rawat K., A.S.S B. Journal of Materials Processing Technology WOS 9240136 3.647
226 2018 SMEC Effect of activated flux on penetration depth, microstructure and mechanical properties of Ti-6Al-4V TIG welds Ramkumar K.D., Varma V., Prasad M., Rajan N.D., Shanmugam N.S. Journal of Materials Processing Technology WOS 9240136 3.647
227 2018 SMEC A comparative assessment on Common Rail Direct Injection (CRDI) engine characteristics using low viscous biofuel blends Ashok B., Nanthagopal K., Chaturvedi B., Sharma S., Thundil Karuppa Raj R. Applied Thermal Engineering WOS 13594311 3.771
228 2018 SMEC Determination of physico chemical properties of biodiesel from Citrullus lanatus seeds oil and diesel blends Sani S., Kaisan M.U., Kulla D.M., Obi A.I., Jibrin A., Ashok B. Industrial Crops and Products WOS 0926-6690 3.849
229 2018 SMEC Variable stiffness laminated composite shells – Free vibration characteristics based on higher-order structural theory Venkatachari A., Natarajan S., Ganapathi M. Composite Structures WOS 2638223 3.858
230 2018 SMEC Vibration study of curved nanobeams based on nonlocal higher-order shear deformation theory using finite element approach Ganapathi M., Merzouki T., Polit O. Composite Structures WOS 2638223 3.858
231 2018 SMEC Studies on seasonal pollution of heavy metals in water, sediment, fish and oyster from the Meiliang Bay of Taihu Lake in China Rajeshkumar S., Liu Y., Zhang X., Ravikumar B., Bai G., Li X. Chemosphere WOS 0045-6535 4.208
232 2018 SMEC Effect of additives on performance, combustion and emission behavior of preheated palm oil/diesel blends in DI diesel engine Senthur Prabu S., Asokan M.A., Prathiba S., Ahmed S., Puthean G. Renewable Energy WOS 9601481 4.357
233 2018 SMEC Experimental and theoretical studies of various solar control window glasses for the reduction of cooling and heating loads in buildings across different climatic regions G K.K., Saboor S., Kumar V., Kim K.-H., Babu T. P. A. Energy and Buildings WOS 0378-7788 4.457
234 2018 SMEC Performance, combustion and emission characteristics of diesel engine fuelled with papaya and watermelon seed oil bio-diesel/diesel blends Asokan M.A., Senthur prabu S., Kamesh S., Khan W. Energy WOS 0360-5442 4.52
235 2018 SMEC Impact behaviour of hybrid composites for structural applications: A review Safri S.N.A., Sultan M.T.H., Jawaid M., Jayakrishna K. Composites Part B: Engineering WOS 1359-8368 4.727
236 2018 SMEC Development and performance comparison of mixed-mode solar crop dryers with and without thermal storage Abubakar S., Umaru S., Kaisan M.U., Umar U.A., Ashok B., Nanthagopal K. Renewable Energy WOS 9601481 4.9
237 2018 SMEC An assessment on the effects of 1-pentanol and 1-butanol as additives with Calophyllum Inophyllum biodiesel Nanthagopal K., Ashok B., Saravanan B., Patel D., Sudarshan B., Aaditya Ramasamy R. Energy Conversion and Management WOS 0196-8904 5.589
238 2018 SMEC An experimental study on the effect of nanoparticles with novel tamarind seed methyl ester for diesel engine applications Dhana Raju V., Kishore P.S., Nanthagopal K., B.Ashok Energy Conversion and Management WOS 0196-8904 5.589
239 2018 SMEC Effect of next generation higher alcohols and Calophyllum inophyllum methyl ester blends in diesel engine Nanthagopal K., Ashok B., Saravanan B., Korah S.M., Chandra S. Journal of Cleaner Production WOS 9596526 5.715
240 2018 SMEC A novel study on the effect lemon peel oil as a fuel in CRDI engine at various injection strategies Ashok B., Nanthagopal K., Saravanan B., Somasundaram P., Jegadheesan C., Chaturvedi B., Sharma S., Patni G. Energy Conversion and Management WOS 0196-8904 6.377
241 2018 SMEC Fabrication and automation of seed sowing machine using IoT Senthilnathan N., Gupta S., Pureha K., Verma S. International Journal of Mechanical Engineering and Technology Scopus 9766340  
242 2018 SMEC Enhanced surface and mechanical properties of bioinspired nanolaminate graphene-aluminum alloy nanocomposites through laser shock processing for engineering applications H.G P.K., S P., M A.X., S K., Lin D., Shukla P., Vasudevan V.K. Materials Today Communications Scopus 23524928  
243 2018 SMEC Thermal buckling behaviour of variable stiffness laminated composite plates Manickam G., Bharath A., Das A.N., Chandra A., Barua P. Materials Today Communications Scopus 23524928  
244 2018 SMEC Enhancement of surface characteristics of direct metal laser sintered stainless steel 316L by shot peening Sugavaneswaran M., Jebaraj A.V., Kumar M.D.B., Lokesh K., Rajan A.J. Surfaces and Interfaces Scopus 24680230  
245 2018 SMEC Experimental Study on Performance Enhancement of Evacuated Tube by Constant Heat Flux Mode Challa G.R., Natarajan M., Palayakkodan A. Applied Solar Energy (English translation of Geliotekhnika) Scopus 0003-701X  
246 2018 SMEC Determination of stress intensity factors of jute fiber-reinforced hybrid polymer-matrix composites Prabaharan Graceraj P., Venkatachalam G., Garg A.S., Akhil Afsan M. Composites: Mechanics, Computations, Applications Scopus 2152-2057  
247 2018 SMEC Enhanced heat transfer by thermosyphon method in electronic devices Kannan K.G., Kamatchi R., Venkatajalapathi T., Krishnan A.S. International Journal of Heat and Technology Scopus 3928764  
248 2018 SMEC Thermal and cost analysis of float and various tinted double window glass configurations on heat gain into buildings of hot & dry climatic zone in India Gorantla K., Shaik S., Setty A.B.T.P.R. International Journal of Heat and Technology Scopus 3928764  
249 2018 SMEC Active vibration control of composite beam Babu R.V., Prasanth T., Chowdary Y., Reddy V. International Journal of Mechanical Engineering and Technology Scopus 0976 – 6340  
250 2018 SMEC Comparative study on orientation of fibers in epoxy composites reinforced with aloe-vera and palmyra fibers Narendiranath Babu T., Tarun K.S., Bandaru S., Vattikuti M. International Journal of Mechanical Engineering and Technology Scopus 0976 – 6340  
251 2018 SMEC Deformation behaviour of magnesium alloy with varying strain rate and tested at room temperature condition Kumar S., Kanth B.S.S., Kumar P. International Journal of Mechanical Engineering and Technology Scopus 0976 – 6340  
252 2018 SMEC Design and analysis of a new airfoil for rc aircrafts and uavs Premkartikkumar S.R., Ashok V., Bhabhra A.R., Beladiya A. International Journal of Mechanical Engineering and Technology Scopus 0976 – 6340  
253 2018 SMEC Design and analysis of human powered hybrid vehicle Singh K., Iyengar M.S., Iyengar N.S., Denis Ashok S. International Journal of Mechanical Engineering and Technology Scopus 0976 – 6340  
254 2018 SMEC Design of fins to maximize the heat transfer rate from the engine cylinder kumar Hotta T., Sajja R.N., Sigireddy R.T., Mugala V.S. International Journal of Mechanical Engineering and Technology Scopus 0976 – 6340  
255 2018 SMEC Experimental study on performance of steam condenser in 600mw singareni thermal power plant Senthur Prabu S., Manichandra M., Bhanu Prakash Reddy G., Raghu Vamshi D., Veera Bramham P. International Journal of Mechanical Engineering and Technology Scopus 0976 – 6340  
256 2018 SMEC Investigation of steady state forced convection heat transfer in a nanofluid cooled circular pipe Kumar A., Kumar A., Kumar S., Govindha Rasu N. International Journal of Mechanical Engineering and Technology Scopus 0976 – 6340  
257 2018 SMEC Investigation on mechanical behaviour of glass fiber reinforced with polyurethane foam and honeycomb Manidhar D.V., Krishna S., Vishnu Prakash V., Deepa A. International Journal of Mechanical Engineering and Technology Scopus 0976 – 6340  
258 2018 SMEC Mechanical behaviour of copper alloy with different Strain Rate at Room temperature Galgat C., Agrawal P., Meraj M., Kumar P. International Journal of Mechanical Engineering and Technology Scopus 0976 – 6340  
259 2018 SMEC Stress and thermal analysis of clutch plate Singhal U., Kumar R., Shursen G.S., Baskar P. International Journal of Mechanical Engineering and Technology Scopus 0976 – 6340  
260 2018 SMEC Study on influence of machinability characteristics in machining of nimonic 90A alloy using copper oxide nanofluid in MQL mode Venkatesan K., Devendiran S., Thakur A., Ashish Chauhan V., Pavan Kalyan P.V. International Journal of Mechanical Engineering and Technology Scopus 0976 – 6340  
261 2018 SMEC Study on mechanical and tribological behaviour of Angora, kenaf and ramie hybrid reinforced epoxy composites Narendiranath Babu T., Aravind S.S., Naveen Kumar K.S., Sumanth Rao M.S. International Journal of Mechanical Engineering and Technology Scopus 0976 – 6340  
262 2018 SMEC Study on mechanical and tribological behaviour of sisal, abaca and sun-hemp hybrid reinforced epoxy composites Narendiranath Babu T., Talla H.K., Kokkirala S., Batta K. International Journal of Mechanical Engineering and Technology Scopus 0976 – 6340  
263 2018 SMEC Active camber and toe control strategy for the double wishbone suspension system Kavitha C., Shankar S.A., Karthika K., Ashok B., Ashok S.D. Journal of King Saud University - Engineering Sciences Scopus 1018-3639  
264 2018 SMEC A study on work life balance of female pharmacists working in private hospitals Shekhar S.K., Jose T.P., Sudhakar R. Research Journal of Pharmacy and Technology Scopus 0974-3618  
265 2018 SMEC Analysis of tensile and flexural strengths of kenaf fabricreinforced hybrid polymer matrix composite Venkatachalam G., Vignesh P., Banarjee D., Karmakar S., Reddy D.M. Composites: Mechanics, Computations, Applications Scopus 21522057  
266 2018 SMEC Design and analysis of secure data enhancement in a digital manufacturing system Mannayee G., Pandivelan C., Boopathi M., Ponnusamy P., Mannayee V. International Journal of Mechanical Engineering and Technology Scopus 9766340  
267 2018 SMEC Impact of rising air pollution in New Delhi: An empirical study Seema A., Sood A., Bhalla S., Bajpai S. International Journal of Mechanical Engineering and Technology Scopus 9766340  
268 2018 SMEC Impact of social plug-in options on consumer purchase intention: A special reference to facebook users Venugopal P., Aswini Priya S., Sathish A.S., Anjani Devi S. International Journal of Mechanical Engineering and Technology Scopus 9766340  
269 2018 SMEC The mediating effect of tangibility and reliability in the patients perception of healthcare quality on patients satisfaction using Bayesian approach Ravikumar B., Subbiah M., Sriram G. International Journal of Mechanical Engineering and Technology Scopus 9766340  
270 2018 SMEC Cylinder head bolts tightening strategies parameters finalization by Taguchi method for multi cylinder engines Marathe A.V., Venkatachalam G., Marathe N.V. International Review of Mechanical Engineering Scopus 19708734  
271 2018 SMEC Experimental investigations on flexural and fracture behaviors of flax fiber reinforced sandwich panels Venkatachalam G., Mehta N., Shukla S., Gupta Y., Sharma A., Ghosh R., Rajan G. International Review of Mechanical Engineering Scopus 19708734  
272 2018 SMEC Flexural and fracture analysis of polymer metal hybrid composite panels reinforced with natural fibers Kazi A., Dam R., Datta S., Venkatachalam G., Rajan G. UPB Scientific Bulletin, Series B: Chemistry and Materials Science Scopus 14542331  
273 2018 SMEC Comparative analyses of biodiesel produced from jatropha and neem seed oil using a gas chromatography–mass spectroscopy technique Kaisan M.U., Abubakar S., Ashok B., Balasubramanian D., Narayan S., Grujic I., Stojanovic N. Biofuels Scopus 17597269  
274 2018 SMEC Finite element analysis of composites under different load conditions with the effect of hybridization of glass reinforcement on Kevlar fibres Paul A.J., Gnanaraj S.D. International Journal of Mechanical Engineering and Technology Scopus 9766340  
275 2018 SMEC Novel method of improving the team goals performance level using lean and six Sigma: A case study problem Rajini J., Nagaraju D., Narayanan S. International Journal of Mechanical Engineering and Technology Scopus 9766340  
276 2018 SMEC Power flow control for the grid integrated renewable energy system Vinifa R., Kavitha A., Selwynraj A.I. International Journal of Mechanical Engineering and Technology Scopus 9766340  
277 2018 SMEC Behaviour of silver streaks after plating on ABS plastics Sreedharan J., Jeevanantham A.K., Velumani V., Manimaran C. Journal of Engineering and Applied Sciences Scopus 1816949X  
278 2018 SMEC A review on fabrication and performance evaluation of small wind turbine blades Ajay V., Venkateshwarlu B., Vishnu Vardhan T. International Journal of Mechanical Engineering and Technology Scopus 9766340  
279 2018 SMEC Coiled tube heat exchangers - a review Kruthiventi S.S., Govindha Rasu N., Kruthiventi S.S., Hanumantha Rao Y.V. International Journal of Mechanical Engineering and Technology Scopus 9766340  
280 2018 SMEC Impact of surface adaptation and Acacia nilotica biofiller on static and dynamic properties of sisal fiber composite Vimalanathan P., Venkateshwaran N., Srinivasan S.P., Santhanam V., Rajesh M. International Journal of Polymer Analysis and Characterization Scopus 1023666X  
281 2018 SMEC Web-based decision system for distributed process planning in a networked manufacturing environment Manupati V.K., Kanigalpula P.K.C., Varela M.L.R., Putnik G.D., Araújo A.F., Vieira G.G. Studies in Computational Intelligence Scopus 1860-949X  
282 2018 SMEC Vibrational analysis of hybrid fabric-reinforced polymer matrix curved composite beams Jain K., Santosh Kumar B., Venkatachalam G., Vimalanand S., Ayyappan S. Composites: Mechanics, Computations, Applications Scopus 21522057  
283 2018 SMEC Multi-response optimization of process parameters of green electrical discharge machining on aisi 2507 super duplex stainless steel using grey relational analysis (Gra) Viswanthvaleti S., Radhakrishnan R., Rajyalakshmi G. International Journal of Mechanical and Production Engineering Research and Development Scopus 22496890  
284 2018 SMEC Production of biodiesel from refined cotton seed oil as well as its effects as fuel in diesel engine Uttamrao K.N., Premkartikkumar S.R. International Journal of Mechanical and Production Engineering Research and Development Scopus 22496890  
285 2018 SMEC Vibration analysis of temperature-dependent fg-cnt reinforced composite plates Soni S.A., Mundeja N., Swaroop A.N.S.P., Thomas B. International Journal of Mechanical Engineering and Technology Scopus 9766340  
286 2018 SMEC Non-conformity recovery and safe disposal by Poka Yoke and hallmarking in a piston unit Sundaramali G., Abinav Shankar S., Manoj Kummar M. International Journal of Productivity and Quality Management Scopus 17466474  
287 2018 SMEC Simulation of hybrid laser-tig welding process using fea Vemanaboina H., Edison G., Akella S., Buddu R.K. Journal of Engineering Science and Technology Scopus 18234690  
288 2018 SMEC Evaluation of flexural strength of epoxy resin based hybrid composites reinforced with Jute, Banana and flax natural fibers for bio medical applications Narendiranath Babu T., Singh A.K., Mandliya A., Singh A., Rama Prabha D. Research Journal of Pharmacy and Technology Scopus 9743618  
289 2018 SMEC Thermal and energy saving analysis by using tinted double window glass combinations for heat gain in buildings Gorantla K., Shaik S., Babu A., Ranga P., Setty T. International Energy Journal Scopus 1513-718X  
290 2018 SMEC Productivity enhancement by component-oriented line balancing method John Rajan A., Ramanamurthy E.V.V., Nath R., Kumar P. International Journal of Industrial and Systems Engineering Scopus 1748-5045  
291 2018 SMEC Optimal design of clutch plate based on heat and structural parameters using cfd and fea Porwal A., Tripathi A., Agrawal T., Baskar P. International Journal of Mechanical Engineering and Technology Scopus 0976 – 6340  
292 2018 SMEC Fatigue life prediction of doubler plate weld joint using virtual strain gauge, validation through experiments and its application Deshmukh A.R., Venkatachalam G., Saraf M.R. International Review of Mechanical Engineering Scopus 1970-8734  
293 2018 SMEC Fabrication and mechanical analysis of jute-sisal hybrid composite Chandran M.S., Sadasivan S., Senthilkumar P., Kumar K.S., Jose A., Shijas A., Kuruvila J. ARPN Journal of Engineering and Applied Sciences Scopus 1819-6608  
294 2018 SMEC ANN and RSM approach for modelling and multi objective optimization of abrasive water jet machining process Srinath Reddy N., Tirumala D., Gajjela R., Das R. Decision Science Letters Scopus 1929-5804  
295 2018 SMEC Adaptive suspension strategy for a double wishbone suspension through camber and toe optimization Kavitha C., Shankar S.A., Ashok B., Ashok S.D., Ahmed H., Kaisan M.U. Engineering Science and Technology, an International Journal Scopus 2215-0986  
296 2018 SMEC Effect of two different rubbers as secondary binders on the friction and wear characteristics of non-asbestos organic (NAO) brake friction materials Raj Jeganmohan S., Gnanaraj Solomon D., Christy T.V. Tribology - Materials, Surfaces and Interfaces Scopus 1751-584X  
297 2018 SMEC Comparative studies of simulation, artificial neural network and fuzzy logic for laser shock peening Kumar R.G., Gopalakrishnan A., Malav A., Panjawani H.S., Rajyalakshmi G. UPB Scientific Bulletin, Series D: Mechanical Engineering Scopus 14542358  
298 2018 SMEC Determination of stress intensity factor (SIF) of coir and aloe vera fibre reinforced hybrid polymer matrix composites Gopalan V., Pragasam V., Jog O.V., Nikam T.D., Shankar G. UPB Scientific Bulletin, Series D: Mechanical Engineering Scopus 14542358  
299 2018 SMEC Calophyllum inophyllum methyl ester biodiesel blend as an alternate fuel for diesel engine applications Ashok B., Nanthagopal K., Sakthi Vignesh D. Alexandria Engineering Journal Scopus 1110-0168  
300 2018 SMEC Effect of Incorporation of Multiwalled Carbon Nanotubes on the Microstructure and Flow Behavior of Highly Concentrated Emulsions Bhagavathi Kandy S., Simon G.P., Cheng W., Zank J., Joshi K., Gala D., Bhattacharyya A.R. ACS Omega Scopus 24701343  
301 2018 SMEC Thermal analysis simulation for Laser Butt Welding of Inconel625 using FEA Vemanaboina H., Edison G., Akella S., Buddu R.K. International Journal of Engineering and Technology(UAE) Scopus 2227524X  
302 2018 SMEC Day lighting and thermal analysis using various double reflective window glasses for green energy buildings Gorantla K.K., Shaik S., Setty A.B.T.P.R. International Journal of Heat and Technology Scopus 3928764  
303 2018 SMEC An identification of the best mixture composition for the joule-thomson refrigerator operating at 90 K Kruthiventi S.S., Govindharasu N., Hanumantha Rao Y.V. International Journal of Mechanical and Production Engineering Research and Development Scopus 22496890  
304 2018 SMEC Stress and vibration analysis on twostage reduction gearbox using finite elements method Pancholi S., Patel M.N., Nikhil Kumar S.P., Narendiranath Babu T. International Journal of Mechanical Engineering and Technology Scopus 9766340  
305 2018 SMEC Technological advancements in energy conservation Anandu N.S., Paul I.J., Rishikesh Mahadevan R. International Journal of Mechanical Engineering and Technology Scopus 9766340  
306 2018 SMEC Collaborative manufacturing based on cloud, and on other I4.0 oriented principles and technologies: A systematic literature review and reflections Varela M.L.R., Putnik G.D., Manupati V.K., Rajyalakshmi G., Trojanowska J., Machado J. Management and Production Engineering Review Scopus 20808208  
307 2018 SMEC Cylinder Head Bolt Tightening Strategies in Case of Multi-Cylinder Engines and Its Effect on Gasket Sealing Performance, Bore Deformation and Piston Ring Conformability Marathe A.V., Venkatachalam G., Marathe N.V. Australian Journal of Mechanical Engineering Scopus 14484846  
308 2018 SMEC Dataset for evaluating fitness index using Adaptive Neuro-Fuzzy Inference System Kulkarni C., Kulkarni S., Kandasamy J. Data in Brief Scopus 23523409  
309 2018 SMEC An Overview of Parameters Influencing the Performance of Hermetic Reciprocating Compressor for Domestic Applications Samuel K.J., Thundil Karuppa Raj R., Edison G. International Journal of Air-Conditioning and Refrigeration Scopus 20101325  
310 2018 SMEC Design and flow analysis of a 2MW wind turbine Sarma K.L.N.S., Vamsi S.K., Thottathil Varghese J., Venkateshwarlu B. International Journal of Mechanical Engineering and Technology Scopus 9766340  
311 2018 SMEC Effect of milling time on production of aluminium nanoparticle by high energy ball milling Rijesh M., Sreekanth M.S., Deepak A., Dev K., Surendranathan A.O. International Journal of Mechanical Engineering and Technology Scopus 9766340  
312 2018 SMEC Key aspects of electric vehicle technologies-An overview Bal D.K., Bhasarkar J.B., Sahoo B.B. International Journal of Mechanical Engineering and Technology Scopus 9766340  
313 2018 SMEC Analysis Of Challenges And Opportunities Prevailing In The Indian Food Industry Ram Swaminathan, J N V Raghuram, Shashank, International Journal of Business and Management Invention Scopus 23198028  
314 2018 SMEC Computational fluid dynamics analysis of a finned tube dehumidifier for a solar humidification dehumidification desalination plant B Monarch, C Chiranjeevi, V Tejasvi, T Srinivas, R Shankar, Pakistan Journal of Biotechnology Scopus 18121837  
315 2018 SMEC COUPLED THERMOMECHANICAL ANALYSIS OF DISC BRAKE ROTOR Yeshwanth Chowdary, Ramesh Babu Vemuluri, Piyush Patil, International Journal of Engineering Research and Application Scopus 22489622  
316 2018 SMEC Cryptocurrency Bitcoin Challenges and opportunities Visalakshmi S, Venugopal, Suraj Kushe sekhar, SPIM International Journal of Management Research Scopus 23945842  
317 2018 SMEC Exergy analysis of solar photo voltaic thermal hybrid heat pump working with circular and triangular evaporator tube configurations N Gunasekar, R Prakash, M Mohanraj, G Sathish Sharma, Pakistan Journal of Biotechnology Scopus 18121837  
318 2018 SMEC High-temperature corrosion behaviour of HVOF sprayed Cr3C2 25NiCr coated on alloy X22CrMoV12-1 at 600 oC Akshy Prasana, Manikandan M, Sreenivasulu, Duoli, Journal of Thermal Spray and Engineering Scopus    
319 2018 SMEC Tribological characteristics of Pongamia oil methyl ester Ashok B. Nantha Gopal K. , Anil Payyappalli Mana Jurnal Tribologi WOS 2289-7282  
320 2017 SMEC 3-D stochastic finite elements for thermal creep analysis of piping structures with spatial material inhomogeneities Y Appalanaidu, Sayan Gupta, Anindya Roy, Acta Mechanica WOS 16196937 2.113
321 2017 SMEC A Comparative study on the effect of oil Pocket Distribution on Coefficient of Friction at the Liner-Ring interface with Coated Piston Rings George Elias Kurien, P M Anil, Evelyn George, Vishal U, Journal of Chemical and Pharmaceutical Sciences Scopus 23498552  
322 2017 SMEC A cyber-physical system based collaborative distributed manufacturing system architecture for intelligent manufacturing Abhishek Thakur, V K Manupati, Nishant Chaudhary, Piyush Tilokani, V K Manupati, Eric Costa, Regional Helix Portugal Non-Scopus    
323 2017 SMEC A genetic algorithm-based artificial neural network model with TOPSIS approach to optimize the engine performance Sakthivel G, Senthil Kumar S, Ilangkumaran M, Biofuels Scopus 17597277 0.449
324 2017 SMEC A hybrid multi-objective evolutionary algorithm approach for handling sequence- and machine dependent set up times in unrelated parallel machine scheduling problem V K Manupati, Rajyalakshmi G, FTS Chan, J J Thakkar, Journal of Sadhana WOS 9737677 0.734
325 2017 SMEC A Review and Comparison of Dugoff and Modified Dugoff Formula with Magic Formula Akshay Bhoraskar, Sakthivel Palanivelu, International Conference on Nascent Technologies in the Engineering Field IEEE conference publications      
326 2017 SMEC A Review on Medicine System Through Ages Venugopal Pulidindi, Sivaji Jinka, Swamy TNVR, International Journal of Mechanical Engineering and Technology Scopus 9766359  
327 2017 SMEC A Review on Nano Coatings for IC Engine Applications S Vijaya Kumar Reddy, Premkartikkumar SR, Radha Krishna Gopidesi, Nitin Uttamrao Kautkar, International Journal of Mechanical Engineering and Technology Scopus 9776359 0
328 2017 SMEC A Review Paper on Design and CFD Analysis of Fan and Casing for Street Vacuum Cleaning machine Nitesh Patel, Akash Mohanty, Nitesh Panchal, International Journal of Advance Research in Engineering Science and Technology Non Scopus 23939877  
329 2017 SMEC A Statistical Analysis On The Wear Behaviour of An Epoxy Resin Reinforced With Biaxial Glass Fibers Silicon Carbide And Aluminium Oxide Narendiranath Babu T, R V Mangalaraja, Mayank Agarwal, Ram Prabha D, Journal of Chemical Technology and Metallurgy Scopus 13147471  
330 2017 SMEC A Survey On Fault Detection Techniques In Different Machines - U Rahamathunnisa, Babu Chellappa Chetty, A Clement King, International Journal of Civil Engineering and Technology Scopus 09766316   
An Image Processing Approach
331 2017 SMEC Activated sintering of tungsten alloys through conventional and spark plasma sintering process N Senthilnathan, A Raja Annamalai, G Venkatachalam, Materials and Manufacturing Processes Scopus 15322475 2.274
332 2017 SMEC Active Vibration Control of Laminated Composite Plates by using External Patches N S Sunil Varma, Ramesh Babu Vemuluri, S S Vamsi Krishna, International Journal of Engineering Research and Application Non Scopus 22489622 0
333 2017 SMEC Aerothermodynamic considerations for energy deposition based drag reduction technique Desai, V Kulkarni, Gadgil, Bibin John, Applied Thermal Engineering Scopus 13594311 3.356
334 2017 SMEC An assessment of calophyllum inophyllum biodiesel fuelled diesel engine characteristics using novel antioxidant additives Ashok B, Nanthagopal K, Jeevanantham AK, Pathikrit Bhowmick, Dhruv Malhotra, Pranjal Agarwal, Energy Conversion and Management WOS 1968904 5.589
335 2017 SMEC An effective hybrid multi objective evolutionary algorithm for solving real time event in flexible job shop scheduling problem M B S Sreekara Reddy, V K Manupati, Ch Ratnam, Rajyalakshmi G, V K Manupati, Measurements WOS 2632241 2.359
336 2017 SMEC An investigation on the effect of sintering mode on various properties of copper-graphene metal matrix composite Ayyappadas C, Raja Annamalai, Muthuchamy, Dinesh K Agarwal, Advanced Powder Technology WOS 9218831 2.648
337 2017 SMEC Analysing Critical Success Factors for Supporting On-line Shopping M L R Varela, Goran Putnik, Maria do Sameiro Carvalho, Luis Ferreira, V K Manupati, International Journal of Web Portals Scopus 19380208  
338 2017 SMEC Analysis of the Double Wishbone Front Suspension System Akshay Bhoraskar, Sakthivel Palanivelu, Ankur Fartyal, International Conference on Nascent Technologies in the Engineering Field IEEE conference publications      
339 2017 SMEC Analytical Investigation of Fan Shroud on a Thermal Heat Exchanger for Automotive Applications K Nantha Gopal, B Ashok, Rishabh Bahuguna, Tanmay Prasad, SAE Technical Series Scopus 1487191  
340 2017 SMEC Assessing environmental impacts of aviation on connected cities using environmental vulnerability studies and fluid dynamics an Indian case study S Ghosh, G Ramchandran, J Nagawkar, K Ramaswamy, A Goenka and A Verma, AI and Society WOS 14355655  
341 2017 SMEC Calophyllum inophyllum methyl ester biodiesel blend as an alternate fuel for diesel engine applications B Ashok, K Nanthagopal, D Sakthi Vignesh, Alexandria Engineering Journal Scopus 11100168  
342 2017 SMEC Characterization of air plasma-sprayed yttria-stabilized zirconia coatings deposited with nitrogen V Bolleddu, P P Bandyopadhyay, V Racherla, International Journal of Advanced Manufacturing Technology WOS 14333015 2.209
343 2017 SMEC Characterization of Microstructure Tensile Strength and Corrosion Behavior of Autogenous GTA Welds of Inconel X750 With and Without Activated Compound Flux Ramkumar K D, Paul N Chungath T Ali I M Vishnu C, Sujai S, Arivazhagan N, Metallography Microstructure and Analysis WOS 21929270 0
344 2017 SMEC Comparative Analysis on the Effect of Zinc Oxide and Ethanox as Additives with Biodiesel in CI Engine Ashok B, Nanthagopal K, Aravind Mohan, Ajith Johny, Tamilarasu A, Energy WOS 3605442 4.52
345 2017 SMEC Comparative Studies on Metallurgical and Mechanical Properties of Bimetallic Combination on Incoloy 800 and SS 316L Fabricated by Gas Metal and Shield Metal Arc Welding Manikandan M, Gunachandran R, Sudhakar S, Srikanth A, Arivarasu M, Transactions of the Indian Institute of Metals WOS 9751645 0.533
346 2017 SMEC Coordinated Two-Echelon Inventory Model for Optimal Inventory and Shipment Decisions under Exponential Price Dependent Demand Burra Karuna Kumar, Dega Nagaraju, S Narayanan, K Kiran Kumar, Proceedings of the International Conference on Materials Manufacturing and Modelling      
347 2017 SMEC Correlating engine NOx emission with biodiesel composition Thangaraja J, Pramod S Mehta, Journal of the Institution of Engineers Series C Scopus 22500553  
348 2017 SMEC Crack Nucleation in beta Titanium Alloys under High Cycle Fatigue Conditions A Review Benjamin R, M Nageswara Rao, Journal of Physics Conference Series Scopus 17426596  
349 2017 SMEC Cycle time reduction in deck roller assembly production unit with value stream mapping analysis Gangala C, V K Manupati, Modi M, V K Manupati, M L R Varela, Machado J, World Conference on Information Systems and Technologies      
350 2017 SMEC Damage Assessment In Structures Using Vibrationdata And Smart Materials D Santhosh Kumar, Mallikarjuna Reddy, bharanidharan, International Journal of Mechanical and Production Engineering Research and Development Scopus 22498001  
351 2017 SMEC Damage Identification In A Multilevel Structure Using Empirical Mode Decomposition Mallikarjuna Reddy, Praveen Krishna, Journal of engineering science and technology Scopus 18234690  
352 2017 SMEC Degradation Modeling To Predict the Residual Life Distribution of Parallel Unit Systems on Benchmark Instances Akshay Chandra, V K Manupat, Muneeb Ahsan, Somnath Lahiri, Suraj Panigrahi, V K Manupati, Proceedings of the World Congress on Engineering      
353 2017 SMEC Delamination detection in composite wind turbine blade spar model by using spatial signal Shivasharanayya Swamy, Mallikarjuna Reddy, International Journal of Mechanical Engineering and Technology Scopus 9776359  
processing
354 2017 SMEC Demonetization Digitalization Day to Day Transactions Impact on business operations Vedantam Seetha Ram, International Journal of Applied Business Scopus 9727302  
And Economic Research
355 2017 SMEC Densification of SiC particle reinforced W-Ni-Fe heavy alloy composites through conventional and spark plasma sintering Jitender, Muthuchamy, Paridh, Raja Annamalai, Trans Indian Inst Met WOS 9751645 0.533
356 2017 SMEC Design and analysis of a bascule bridge using finite element method Krishna A B, Pawgi A P, Gupta S, Narendiranath Babu T, International Journal of Mechanical Engineering and Technology Scopus 9776359  
357 2017 SMEC Design and analysis of a fuel preheating device for evaluation of ethanol based biofuel blends in a diesel engine application K Nanthagopal, B Ashok, R Thundil Karuppa Raj, Alagiasingam S, Appu S, Murugan A, SAE International Journal of Engines Scopus 19463936  
358 2017 SMEC Design and Analysis of a Two-Stage Adsorption Air Chiller P Benrajesh, A John Rajan, IOP Conf Series Materials Science and Engineering Scopus 17578981  
359 2017 SMEC Design and Analysis on Multi Linkage Brake System with Variable Pedal Ratio Deepa A, Mukesh Varma, Manidhar, Pranshu, ICMMM      
360 2017 SMEC Design and Development of press tool for Hemming process V Sunil, V Kumarasubramaniam, Rajkumar E, International Journal of Advance Research in Engineering Science and Technology Non Scopus 23939877  
361 2017 SMEC Design and thermal analysis of a two wheeler disc plate at different speeds using ANSYS software Ayush Gupta, Mayank Upadhyay, Tapano Kumar Hotta, International Journal of Advance Engineering and Research Development Non Scopus 23484470  
362 2017 SMEC Design of a substrate board for heat transfer enhancement from an array of discrete heat sources Tapano Kumar Hotta, Rahul Narnindi, Journal of Chemical and Pharmaceutical Sciences Scopus 23498552  
363 2017 SMEC Design Of Spm With Roll Tool For Mudguard Hemming R Vicknesh, V Kumarasubramaniam, RAJKUMAR E, International Journal of Advance Research in Engineering Science and Technology Non Scopus 23939877  
364 2017 SMEC Determinants of M-Commerce -A Study on Online M-Commerce adopters Rajesh M, Swamy TNVRL, Manoharan M, International Journal of Economic Research Scopus 9729380  
365 2017 SMEC Development of Environmental Value Stream Model for Assessing Sustainability in Manufacturing K Jayakrishna, M Srikrishna, S Senthilkumar, A Vinoth Louie, R Kamalakannan, Applied Mechanics and Materials Non Scopus 16609336  
366 2017 SMEC Dynamic characteristics of curved nanobeams using nonlocal higher-order curved beam theory M Ganapathi, O polit, O Polit, Physica E Low dimensional Systems and Nanostructures WOS 13869477 2.399
367 2017 SMEC Earthquake Detection and Alerting System using GSM Technology A Plan to Save Some Valuable Lives in this World K V N kavitha, Saket Saraf, N Senthilnathan, International Journal of Electronics Electrical and Computational System Non-Scopus 2348117X  
368 2017 SMEC Effect of different temperature load on thermal postbuckling behaviour of functionally graded shallow curved shell panels Vishesh Ranjan Kar, Subrata Kumar Panda, T R Mahapatra, Composite Structures WOS 2638223 4.45
369 2017 SMEC Effect of fillers on the microstructure mechanical properties and hot corrosion behavior of Nb stabilized austenitic stainless steel welds Devendranath Ramkumar K, Anirudh S Singh S Goyal S Gupta SK, Arivazhagan N, Journal of materials research Scopus 8842914 1.631
370 2017 SMEC Effect of initial roughness and oxidation on the running-in wear of machined surfaces under dry sliding P M Anil, Rajesh Kumar D, Sethuramiah A, International Journal of Surface Science and Engineering WOS 17497868 0.5
371 2017 SMEC Effect of particle size distribution on CFD simulation of fluidization of Alumina particles Marale S, Niranjana Behera, Jadhav M, Shete A, Niranjana Behera, Journal of Chemical and Pharmaceutical Sciences Scopus 23498552  
372 2017 SMEC Employee Loyalty Organizational Performance and Performance Evaluation A Critical Survey Sachin Murali, Aayush Poddar, Seema A, IOSR Journal of Business and Management Non Scopus 2278487X  
373 2017 SMEC Enhancement of exfoliation corrosion resistance of aluminium alloy 5083 by shot peening A Vinoth Jebaraj, L Ajay Kumar, C R Deepak, K V V Aditya, Surface Review and Letters Scopus 0218625X  
374 2017 SMEC Evaluation and Selection of Best Priority Sequencing Rule in Job Shop Scheduling using Hybrid MCDM Technique Kalla Kiran Kumar, Dega Nagaraju, S Gayathri, S Narayanan, IOP Conference Series Materials Science and Engineering Scopus 1757899X  
375 2017 SMEC Evaluation and selection of material handling equipment in iron and steel industry using analytic hierarchy process Sajja Varun, Raj Harshita, Sesha Pramod, Dega Nagaraju, IOP Conference Series Materials Science and Engineering Scopus 1757899X  
376 2017 SMEC Evaluation and Selection of Predicaments in Pharmaceutical Supply Chain using AHP under Fuzzy Environment E V S Nikhil, V Sai Ram, V Charan Yadav, Kalla Kiran Kumar, Dega Nagaraju, IOP Conference Series Materials Science and Engineering Scopus 1757899X  
377 2017 SMEC Evaluation of tensile Propertiesof Epoxy Resin Based Composites Reinforced With Jute Banana Flax And Uni-Axial Glass Fibers Narendiranath Babu T, Anil Mandliya, Akash Kumar Singh, Avneesh Singh, Rama Prabha D, International Journal of Civil Engineering and Technology Scopus 09766316   
378 2017 SMEC Evolution Of Supply Chain Management With Emerging Jeetesh Singh, JNVRaghuram, International Journal of Mechanical engineering and Technology Scopus 9776359 3.46
Technologies
379 2017 SMEC Experimental Analysis of Surface Morphology of Commercial Fuel Filter with Oxygenated Fuels Anant Parashar, Thangaraja J, SAE Technical Paper Scopus 1487191  
380 2017 SMEC Experimental Investigation Of Chip Characterstics In Various C singh, B Venkateshwarlu, N Sachdeva, R Tripathi, Ayush Gupta, International Journal of Mechanical Engineering and Technology Scopus 9776359 0
Machining Processes
381 2017 SMEC Experimental Investigation of Mixed Convection and Surface Radiation Heat Transfer from Protruding Discrete Heat Sources Mounted on a Vertical Channel Tapano Kumar Hotta, Perni Sri Harsha, S P Venkateshan, Heat Transfer Research Scopus 10642285 0.868
382 2017 SMEC Experimental investigation of radiator performance using TIO2 nanfluid Sai Nikhil Y, Govindha Rasu N, Dinesh G P, Girish Hemanth B B, International Journal of Mechanical Engineering and Technology Scopus 9776359 0
383 2017 SMEC Experimental Investigation on Performance and Emission Characteristics of Neodymium oxide Coated Low Heat Rejection Diesel Engine using Bio Diesel G Vidyasagar Reddy, N Govindha Rasu, T Hari Prasad, International Conference on Trends and Advanced Research in Green Energy Technologies      
384 2017 SMEC Experimental investigation on the suitability of ozonated electrolyte in travelling wire electrochemical machining Kalaimathi, Venkatachalam, Sivakumar, Ayyappan, Journal of the Brazilian society of mechanical sciences and engineering WOS 18063691  1.3
385 2017 SMEC Experimental investigations on LPG diesel dual fuel engine Nayan Mirgal, M Mohamed Ibrahim, Shrikant Kumbhar, Babu Chellappachetty, Journal of Chemical and Pharmaceutical Sciences Scopus 2349-8552  
386 2017 SMEC Experimental investigations on the SiO2 flux-assisted GTA welding of super-austenitic stainless steels Ramkumar K D, Varma J L N Chaitanya G, Logesh S Krishnan M, Arivazhagan N, Shanmugam N S, International Journal of Advanced Manufacturing Technology WOS 1433-3015 2.209
387 2017 SMEC Experimental studies on the effect of metal oxide and antioxidant additives with Calophyllum Inophyllum Methyl ester in compression ignition engine Ashok B, Nanthagopal K, Rayapati Subbarao, Tamilarasu A, Johny A, Mohan A, Journal of Cleaner Production WOS 9596526 5.71
388 2017 SMEC Experimental study on crushing performance of different geometrical structures woven natural silk epoxy composite tubes Devendiran S, Devendiran S, Venkatesan K, Arun Tom Mathew, Abhijeet Thaku, International Journal of Mechanical Engineering Scopus 20504586  1.79
389 2017 SMEC Fabrication And Performance Analysis Of Flame Retardant And Natural Fibers Reinforced Devendiran, venkatesan, Bharath, Sri Anurag Sai, Sai Mohan, International Journal of Mechanical Engineering and Technology Scopus 9776359 0
Composites
390 2017 SMEC Fabrication of BCP Cellulose composite scaffolds for bone regeneration I Manjubala, Priya Ganesan, U Narendra Kumar, B Madhan, Orthopaedic Proceedings Non-Scopus 20494416  
391 2017 SMEC FE Analysis of Impact on Kevlar Epoxy Laminates with Different Orientations and Thicknesses Rahul Singh sikarwar, R Velmurugan, N K Gupta, Subham Naik, Materials Today Proceedings Scopus 22147853  
392 2017 SMEC Friction Stir Welding Of Dissimilar Al6061-T6 And Pure Copper M Velu, Ajay Tidole, Paras Mehra, Devdatt Kulkarni, International Journal of Mechanical Engineering and Technology Scopus 9766359  
393 2017 SMEC Heat transfer enhancement of uniformly linearly heated side wall in a square enclosure utilizing alumina water nanofluid Natesan Saritha, A Senthil Kumar, Murugesan Sathiyamoorthy, Chamkha Ali J, Computational Thermal Sciences Non-Scopus 19402554 0
394 2017 SMEC High temperature wear behavior of Nano Micro B4C reinforced aluminium matrix composites fabricated by an ultrasonic cavitation assisted solidification process Harichandran, Selvakumar, Venkatachalam, Transactions of Indian institute of metals WoS 9751645 0.57
395 2017 SMEC Impact behaviour of hybrid composites for structural applications A review Syafiqah Nur Azrie Safri, Mohamed Thariq Hameed Sultan, Mohammad Jawaid, Jayakrishna K, Composites Part B Engineering WoS 18791069 4.627
396 2017 SMEC Impact of Demonetization on the Indian Economy and its people Aman Mangal, kaustub Kalyankar, B Ravikumar, International Research Journal of Engineering and Technology Non-Scopus 23950072  
397 2017 SMEC Impact of Internal Motivational Factors on Performance of Small Medium Enterprises Run by Women Entrepreneurs in Hyderabad-An Empirical Study Jahnavi C, Syed Khalid Perwez, Swamy TNVR, Ramaseshan H, International Journal of Applied Business and Economic Research Non-Scopus 9727302  
398 2017 SMEC Impact of Social Media - A study on Companys perspective Saravanabhavan, S Siva Kumar, G Velmurugan, R Subashini, Man in India Scopus 251569  
399 2017 SMEC Impact of surface adaptation and Acacia Nilotica bio filler onstatic and dynamic properties of sisal fiber composite P Vimalanathan, N Venkateshwaran, SP Srinivasan, V Santhanam, M Rajesh, International Journal of Polymer Analysis and Characterization WoS 15635341 2.47
400 2017 SMEC Impact Of The Antecedents Of The Supply Chain Planning For RaghuramJ, Ravilochanan, International Journal of Mechanical engineering and Technology Scopus 9766359  
An Efficient Retailer Performance
401 2017 SMEC Impacts of climate warming on atmospheric phase transition mechanisms CA Varotsos, Satyajit Ghosh, Theoretical and Applied Climatology WoS 14344483 2.64
402 2017 SMEC Implementation of Digital Technology Strategy for Intellegence Updation and Facilitation through Modern Information Communication Technology Varunkumar M, Venugopal Pulidindi, Journal of Chemical and Pharmaceutical Sciences Scopus 23498552  
403 2017 SMEC Improvement In Material Properties Of Thermal Energy Storage Dronadula Amarnath Reddy, Raja Sekhar Y, K V SHARMA, Nanoscience Nanotechnology Asia Scopus 22106820   
Medium With Nanostructured Materials
404 2017 SMEC Influence of aspect ratio on the thermal performance of rectangular shaped micro channel heat sink using CFD code Drs Raghuraman, Rtk Raj, Pk Nagarajan Alexandria Engineering Journal Scopus 11100168 0.135
, Bva Rao,
405 2017 SMEC Influence of injection timing and exhaust gas recirculation of a Calophyllum inophyllum methyl ester fuelled CI engine B Ashok, K Nanthagopal, Fuel Processing Technology WoS 18737188 3.752
R Thundil Karuppa Raj, J Pradeep Bhasker, D Sakthi Vignesh,
406 2017 SMEC Influence of nano-zirconia in alumina refractory ceramics for improved mechanical properties Sudip K Paul, Ariful Rahaman, International Journal of Mechanical Engineering and Technology Scopus 9766359  
407 2017 SMEC Influence of Tungsten on Dry Sliding Wear Behaviour of Sintered Hot Extruded PM Alloy Steels Fe-C-W-Ti S Senthur Prabu, S Prathiba, Asokan M A, MK Sreelekh, Francis Steff, Mounish Sai, Materials Research Non-Scopus 19805373 0.634
408 2017 SMEC Influence on the effect of zinc oxide and titanium dioxide nanoparticles as an additive with Calophyllum inophyllum methyl ester in a CI engine B Ashok, K Nanthagopal, A Tamilarasu, Ajith Johny, Aravind Mohan, Energy Conversion and Management WoS 18792227 5.6
409 2017 SMEC Innovation and Adoption Sivaji Jinka, Venugopal Pulidindi, P Rajkumar, Ch Ramesh, International Journal of Electrical Power and Power Electronics WoS 1420615  
410 2017 SMEC Integrated Framework based on Critical Success Factors for E-Commerce M L R Varela, V K Manupati, A F Araujo, G G Vieira, V K Manupati, K Manoj, Journal of Information Systems Engineering Management Non-Scopus 24684376  
411 2017 SMEC Inventory routing problem with simultaneous pickup and delivery of returnable transport items with consideration of renting and Repairing Shubhankar Singh, Yash Gupta, Akash Mishra, Siva Prasad Darla, International Journal of Engineering Research Technology Scopus 09743154  2.97
412 2017 SMEC Investigation of reconfiguration effect on makespan with social network analysis for flexible job shop scheduling problem M B S Sreekara Reddy, V K Manupati, Ch Ratnama, Rajeev Agrawal, M L R Varela, Ila Sharma, International Journal of Computers and Industrial Engineering WoS 3608352  
413 2017 SMEC Investigation on semi-active suspension system for multi-axle armoured vehicle using co-simulation Trikande M W, Vasudevan R, Jagirdar V, Sambat Rao, Defence Science Journal WoS 0976464X. 0.5
414 2017 SMEC Investigations on the microstructure tensile strength and high temperature corrosion behaviour of Inconel 625 and Inconel 718 dissimilar joints Ramkumar K D, Arivazhagan, Abraham W S Viyash V, Journal of Manufacturing Processes WOS 15266125 2.231
415 2017 SMEC Journal bearing fault detection based on Daubechies Wavelet Narendiranath Babu T, Himamshu H S, Prabin Kumar, Rama Prabha D, Nishant Chiluar, Archives of Acoustics WoS 2300262X 0.835
416 2017 SMEC Large eddy simulation of three-dimensional plane turbulent free jet flow Mukul Bisoi, Manab Kumar Das, Subhransu Roy, Devendra Kumar Patel, European Journal of Mechanics B Fluids WoS  09977546 1.969
417 2017 SMEC Lemon Essential oil A Partial Substitute for Petroleum Diesel Fuel in Compression Ignition Engine B Ashok, K Nanthagopal, R Thundil Karuppa Raj, Shantanu Jathar, K John samuel, Rahul krishnan, International Journal Of Renewable WoS 13090127 2.347
Energy Research
418 2017 SMEC Lemon peel oil A novel renewable alternative energy source for diesel engine B Ashok, R Thundil Karuppa Raj, K Nanthagopal, R Krishnan, Subbarao R, Energy Conversion and Management WoS 18792227 5.589
419 2017 SMEC Lever ayus has huls sleeping beauty finally awakened-case study Ramaseshan H, Manoharan M, Kalyani Rangarajan, The case centre      
420 2017 SMEC Manufacturing Services Classification in a Decentralized Supply Chain using Text Mining V K Manupati, MD AKHTAR, M L R Varela, Goran Putnik, A M Madureira, Hybrid Intelligent System Non-Scopus    
421 2017 SMEC Mechanical and Thermal properties of Nanoclay glass fiber epoxy laminated composite Bipin Kumar Sharma, Geet Sharma, Ariful Rahaman, International Journal of Applied Engineering Research Scopus 9739769  
422 2017 SMEC Nature of job and psychiatric problems- the experiences of industrial workers Syed Khalid Perwez, Ramaseshan H, Mohammad Manzoor, Swamy TNVR, Global Journal of Health Science Non-Scopus 19169744  
423 2017 SMEC Nonlinear thermoelastic deflection of temperature-dependent FGM curved shallow shell under nonlinear thermal loading T R Mahapatra, Subrata Kumar Panda, Vishesh Ranjan Kar, K Mehar, Journal Of Thermal Stresses WoS 1521074X 1.45
424 2017 SMEC Numerical investigation of natural and mixed convection heat transfer on optimal distribution of discrete heat sources mounted on a substrate Mathew V Karvinkoppa, Tapano Kumar Hotta, International Conference on Science Engineering and Technology      
425 2017 SMEC Numerical investigation of shell and tube heat exchanger using Al2O3 nanofluid Surana A K, R Thundil Karuppa Raj, K John Samuel, Harshit S, Kumar U, International Journal of Thermodynamics Scopus 21461511  
426 2017 SMEC Optimisation and formability study of AA5052 through incremental sheet forming Angshuman Baruah, Pandivelan C, Jeevanantham AK, Subhodeep Das, International Journal of Computer Aided Engineering and Technology Scopus 17572665  
427 2017 SMEC PEO-CMC blend nanofibers fabrication by electrospinning for soft tissue engineering applications Basu Poulami, I Manjubala, Alexandros Repanas, Anamika Chatterjee, Birgit Glasmacher, U NarendraKumar, Materials Letters WoS 0167577X 2.572
428 2017 SMEC Perforated Aluminium Sheet Forming Simulation Using Pamstamp Kovalan SANDIYAPPAN, Venkatachalam GOPALAN, Arun Tom Mathew, Academic Journal of Manufacturing Engineering Non-Scopus 15837904  
429 2017 SMEC Performance analysis and emissions profile of cottonseed oil biodiesel ethanol blends in a CI engine K Nanthagopal, B Ashok, K Senthil Kumar, R Thundil Karuppa Raj, Denis Ashok S, Varatharajan V, Biofuels WoS 17597277 0.784
430 2017 SMEC Performance improvement study of cessna-172 aircraft using CFD Manoviraj Singh S, Govindha Rasu N, Arjun Singh, International Journal of Mechanical Engineering and Technology Scopus 9766359 0
431 2017 SMEC Postbuckling analysis of shear deformable FG shallow spherical shell panel under nonuniform thermal environment Vishesh Ranjan Kar, Subrata Kumar Panda, JOURNAL OF THERMAL STRESSES WoS 1521074X 1.45
432 2017 SMEC Reliability aspects of TiO2 nano fluid coolants in Copper micro heat exchangers DRS Raghuraman, P K Nagarajan, BVA Rao, International Journal of ChemTech Research Scopus 24559555  
433 2017 SMEC Religiosity as A Panacea to Mitigate Domestic Violence in India karunanithi G, Manoharan M, International Conference on Victim Assistance      
434 2017 SMEC Review On Performance Improvement Of As Rs By Implementing Various Techniques For Industries Akshay Malpure, Prasanna Shinde, Siddhesh Kanekar, Rajkumar E, Journal of Chemical and Pharmaceutical Sciences Scopus 23498552  
435 2017 SMEC Semi-active vibration control of an 8x8 armored wheeled platform Trikande MW, Vasudevan R, Karve NK, Jagirdar VV, Ananda Raj A, Journal of Vibration and Control WOS 17412986 2.101
436 2017 SMEC Sexual Harassment At TVF -teaching note Ramaseshan H, Manoharan M, Himanshu Tandon, Syed khalid Pervez, The case centre      
437 2017 SMEC Social Media Recruiting an Alternative for Traditional Campus Hiring Padmanand V, Samuel Rajkumar V, Venugopal Pulidindi, Man in India Scopus 251569  
438 2017 SMEC Sources Of Stress Among Women Entrepreneurs-An Empirical Approach KOKILA, SUBASHINI R, VELMURUGAN, International Journal of Industrial Engineering and Management Science Scopus 24461822  
439 2017 SMEC Specific Wear Rate Of Epoxy Resin Based Composites Reinforced With Natural Fibers And Uni-Axial Glass Fibers For Bio Medical Applications Narendiranath Babu T, Mageshvaran T, Shankar t, Rama Prabha D, International Journal of Civil Engineering and Technology Scopus 9766316  
440 2017 SMEC Static Dynamic and Harmonic Analysis of Heavy Vehicle Chassis System Dasaradh Palagiri, Ramesh Babu Vemuluri, Chavali Joy Davidson, Internation al Journal of Research in Mechanical Engineering and Technology Non-Scopus 22495762  
441 2017 SMEC Streptomyces kanamyceticus derivative- An excellent corrosion inhibitor E L Harish, S Karthikeyan, Journal of Corrosion Science and Engineering Scopus 14668858  
442 2017 SMEC Structural Analysis of Electric Vehicle Transmission - Mounts and Casing for Different Materials Shishir Sirohi, B Ashok, Saurabh Yadav, V Ramesh Babu, C Kavitha, K Nantha Gopal, SAE Technical Paper Scopus    
443 2017 SMEC Study on the effect of exhaust gas based fuel preheating device on ethanol diesel blends operation in a compression ignition engine K Nantha Gopal, B Ashok, Vignesh Varatharajan, Vivek Anand, R Dinesh Kumar, Clean Technologies and Environmental Policy WOS 16189558 3.4
444 2017 SMEC Telefacturing based distributed manufacturing environment for optimal manufacturing service by enhancing the interoperability in the hubs V K Manupati, M Krishnan, Maria Leonilde Rocha Varela, Jose Machado, Journal of Engineering WOS    
445 2017 SMEC The antecedents of Agriculture growth an Indian perspective M Jahnavi, Venugopal Pulidindi, S Aswini Priya, M Varun Kuma, Journal of Chemical and Pharmaceutical Sciences Scopus 23498552  
446 2017 SMEC The effect of electrodeposition zinc-cobalt alloy coatings on the mechanical properties of pressure die cast pdc al 7075 G Sundaramali, S Karthikeyan, P A Jeeva, International Journal of Mechanical Engineering and Technology Scopus 9766359  
447 2017 SMEC Thermal and die electric properties of chemically modified municipal solid waste and banana fiber reinforced polymer composites Ronald Aseer J, Sankaranarayanasamy Krishnasamy, Jayabalan Perumalsami, Natarajan R, Priya Dasan Keereyadath, Environmental Progress and Sustainable Energy WOS 19447450 1.326
448 2017 SMEC Transient Analysis on a Freewheel Differential For Baja Sae using Finite Element Method TNarendiranath Babu, Ujjwal Belwariar, RajKumar E, International Journal of Control Theory and Applications Scopus 9745572  
449 2017 SMEC Transient parameter analysis of pneumatic conveying of fine particles for predicting the change of mode of flow Shijo JS, Niranjana Behera, Niranjana Behera, Particuology WOS 16742001 2.621
450 2017 SMEC Unsteady And Steady State Analysis Of Natural Convection Heat Transfer In The Pin-Fin Apparatus Shubham Mandot, GovindhaRasu N, International ISHMT ASTFE Heat and Mass Transfer Conference      
451 2017 SMEC Utilitarian Dimensions And Behavioral Inconsistencies Of Young Fanatic Mobile Phone Users A Study On Indian Perspectives Gemini V Joy, Paul S S, Khalid Alhamari, Anbuudayasankar S P, International Journal Of Enterprise Network Management Scopus 17481260  
452 2017 SMEC Vernacular architecture as an idiom for promoting cultural continuity in South Asia with a special reference to Buddhist monasteries S Ghosh, A Goenka, M Deo, D Mandal, AI and Society Springer Scopus 14355655  
453 2017 SMEC Virtual reality and its Applications in Manufacturing Industries AniruddhaTalekar, SaurabhPatil, PrashantThakre, Rajkumar E, Journal of Chemical and Pharmaceutical Sciences Scopus 23498552  
454 2017 SMEC Wear Loss Behaviour of Reinforced Hybrid Composite Basalt Fiber With Titanium Oxide Barium Sulphate And Silicon Carbide Narendiranath Babu T, Ram Prabha D, Journal of Chemical Technology and Metallurgy Non-Scopus 13147978   
455 2017 SMEC WEDM machining on Aerospace Materials for improving Material Properties Tejas Ajay, Rajyalakshmi G, Mayur Patil, Materials Today Proceedings Scopus 22147853 0.387
456 2017 SMEC Weldability machinability and surfacing of commercial duplex stainless steel AISI2205 for marine applications A recent review A Vinoth Jebaraj, L Ajay Kumar, C R Deepak, K V V Aditya, Journal of Advanced Research WOS 20901232 4.327
457 2017 SMEC Wound healing materials - A perspective for skin tissue engineering Basu Poulami, I Manjubala, U Narendra Kumar, Current Science Non-Scopus 113891 0.843
458 2016 SMEC A 3-d computational model for optimum design and analysis of vertical take-off in aircraft Jain, U., Mukkamala, Y. AIAA Modeling and Simulation Technologies Conference, 2016 Scopus 978-1-62410-429-9 -
459 2016 SMEC A case study on effect of grouping technique in a multi-stage hybrid flow shop R Pugazhenthi, M Anthony Xavior, R saravanan, International Journal of Computing Science and Mathematics Non- Scopus 9739769  
460 2016 SMEC A cointegration analysis of price diffusion amid ADRs and dually listed Indian stocks Visalakshmi S, Lakshmi P, Kavitha Shanmugam, Kesava Prasad, International Journal of Business Innovation and Research Scopus 2322083X  0.77
461 2016 SMEC A geoengineering approach toward tackling tropical cyclones over the Bay of Bengal S Ghosh, A Sharma et al, Atmosheric Science Letters WOS 1530261X 1.504
462 2016 SMEC A multi-perspective integrated framework of critical success factors for supporting on-line shopping M L R Varela, Ferreira M F, Vieira G G, V K Manupati, Manoj K, Iberian Conference on Information Systems and Technologies Scopus 21660727  
463 2016 SMEC A new method for designing a compliant mechanism based displacement amplifier BHARANIDARAN R, Srikanth SA, IOP Conference Series Materials Science and Engineering Scopus 1757899X 0
464 2016 SMEC A Review on Effect of Thermal Factors on Performance of High Power Light Emitting Diode -HPLED A Rammohan, C Ramesh Kumar, Journal of Engineering Science and Technology Review Scopus 17912377  
465 2016 SMEC Advanced oxidation of catechol in reverse osmosis concentrate generated in leather wastewater by Cu–graphite electrode Maharaja, P., Boopathy, R., Karthikeyan, S., Mahesh, M., Komal, A.S., Gupta, V.K., Sekaran, G. International Journal of Environmental Science and Technology WOS 17352630 2.344
466 2016 SMEC An Assessment on performance combustion and emission behaviour of a diesel engine powered by ceria nanoparticle blended biofue Annamalai M, Dinesh B, Nanthagopal K, SivaramaKrishnan P, Isaac JoshuaRamesh Lalvani, Energy Conversion and Management WOS 1968904 5.589
467 2016 SMEC An integration of virtual experimental Hardwaren Loop simulation techniques for an effective assessment of DTC FOC motor control algorithms for Hybrid Electric Fuel Cell Vehicle application S S Ramadasi, A Senthil Kumar, Thipse Sukrut Shrikant, Marathe Neelkanth V, International Journal of Control Theory and Applications Scopus 9745572 0
468 2016 SMEC An Intelligent feature based process planning for rotational parts Reddy S, V K Manupati, Manidhar D V, Raj H, Ali A, V K Manupati, IEEE      
469 2016 SMEC An Investigation on Effect of Heating Mode and Temperature on sintering of Fe-P alloys Muthuchamy, Raja Annamalai, Rajeev Kumar, Anish Upadhyaya, Material Characterisation WOS 10445803 2.236
470 2016 SMEC Analysis of Coning and Lubrication at Flexspline cup and Cam Interface in Conventional Harmonic Drives Bikash Routh, Rathindranath Maiti, Ray A K, Industrial lubrication and Triboology UK Scopus 368792 0.605
471 2016 SMEC Analysis of dimensionality effect on shock wave boundary layer interaction in laminar hypersonic flows Bibin John, V Kulkarni, International Journal of Heat and Fluid Flow WOS 0142727X 1.873
472 2016 SMEC Analysis Of Mechanical Behaviour Of Hybrid Fiber P Prabaharan graceraj, Gopalan venkadachalam, C Pandivelan, A Gautham Shankar, Chandan byral, UPB Scientific Bulletin Series D Mechanical Engineering Non- Scopus 14542358  
Jute-Gongura Reinforced Hybrid Polymer Matrix Composites
473 2016 SMEC Analysis on Multi Linkage Brake System with Variable Pedal Ratio Deepa A, Yashwant Singh D, Mukesh Varma, Pranshu Khakhar, Materials preceedings Scopus 22147853  
474 2016 SMEC Angular torque methodology for Cylinder Head bolted joint and validation by FE and experimental work Marathe, A.V., Marathe, N.V., Venkatachalam, G. International Journal of Manufacturing, Materials, and Mechanical Engineering Scopus 21561672 -
475 2016 SMEC Animal fat methyl ester as a fuel substitute for DI compression ignition engine B Ashok, R Thundil Karuppa Raj, K Nanthagopal, Tapaswi A, Jindal A, Hari Subbish Kumar S, International Journal of Thermodynamics Scopus 21461511 1.08
476 2016 SMEC Anodic electrochemical performances of MgCo2O4 synthesized by oxalate decomposition method and electrospinning technique for Li-ion battery application Darbar, D., Reddy, M.V., Sundarrajan, S., Pattabiraman, R., Ramakrishna, S., Chowdari, B.V.R. Materials Research Bulletin WOS 255408 2.288
477 2016 SMEC Assessing environmental impacts of aviation on connected cities using environmental vulnerability studies and fluid dynamics: an Indian case study Ramchandran, G., Nagawkar, J., Ramaswamy, K., Ghosh, S., Goenka, A., Verma, A. AI and Society WOS 14355655  
478 2016 SMEC Bearing fault prediction using filter based feature selection methods and data mining techniques S Devendiran, N Harsha Teja, D N Praveen, Hoshima Reddy, International Journal of Mechanical and Mechatronics Engineering Scopus 2077124X  
479 2016 SMEC Building Lateral Thinking Strategies to Impart English Speaking Skills Nageswari R, Ravikumar B, Jayamani, Pertanika Journal of Social Sciences and Humanities   22318534   
480 2016 SMEC Characterization of air plasma-sprayed yttria-stabilized zirconia coatings deposited with nitrogen Bolleddu, V., Racherla, V., Bandyopadhyay, P.P. International Journal of Advanced Manufacturing Technology WOS 14333015 1.568
481 2016 SMEC Cooling System Optimisation of a Multi - Point Fuel Injection Engine Vadivelu Ma, Naiju CD, Kumar CR SAE Technical Papers Scopus 1487191  
482 2016 SMEC Current advances in enhancement of wear and corrosion resistance of titanium alloys a review REVATHI A, GEETHA MANIVASAGAM, MAGESH S, Vamsi Krishna Balla, Mitun Das, Materials Technology WOS 17535557 1.26
483 2016 SMEC Deformation behaviour of alpha beta brass at high temperature and at different strain rates Praveen Kumar, B P Kashyap, Journal of Chemical and Pharmaceutical Sciences Scopus 23498552 1.421
484 2016 SMEC Design analysis of solar-powered unmanned aerial vehicle Sri, K.R.B., Aneesh, P., Bhanu, K., Natarajan, M. Journal of Aerospace Technology and Management Scopus  21759146  
485 2016 SMEC Design and analysis of gear system for turboshaft aero engine reduction gearbox Ritu Jacob Boby, Raj Kumar E, Indian Journal of Science and Technology Scopus 9746846  
486 2016 SMEC Design and analysis of latch access panel of aero engine components Thomson Manoj B, Raj Kumar E, Indian Journal of Science and Technology Scopus 9746846  
487 2016 SMEC Design and fabrication of high strength, high modulus polymer reinforced metal matrix composites for light weight applications Kumaran, D., Rajadurai, A., Padmanabhan, K. Indian Journal of Science and Technology Scopus 9746846  
488 2016 SMEC Design considerations and overview of an engine exhaust manifold gasket K Nanthagopal, B Ashok, R Thundil Karuppa Raj, Sabloke H, Agarwal A, Journal of Chemical and Pharmaceutical Sciences Scopus 23498552  
489 2016 SMEC Design Development And Testing Of Novel Remote Deepa A, Naveen Krishna Baru, Sagarnath G, ARPN Journal of Engineering and Applied Sciences Scopus 18196608  
Controlled Electrically Operated Hydraulic Jack
490 2016 SMEC Design for a Low Altitude Unmanned Aerial Vehicle Deepa A, Shashank, Vishnu G, sumit, IEEE AERO CONF   1095323X  
491 2016 SMEC Design of axle and disc brakes for installation in a trolley Gaurav Sevda, RajKumar E, American Eurasian Journal of Sustainable Agriculture Non- Scopus 19981074  
492 2016 SMEC Determination of Optimum Tool for Efficient Rock Cutting Samui, P., Kumar, R., Kurup, P. Geotechnical and Geological Engineering WOS 15731529  
493 2016 SMEC Determination of stress intensity factor of banana fibre reinforced hybrid polymer matrix composite using finite element method Suryawanshi, R.T., Venkatachalam, G., Vimalanand, S.V. Periodica Polytechnica, Mechanical Engineering Scopus 1587379X  
494 2016 SMEC Development of pulsed current gas tungsten arc welding technique for dissimilar joints of marine grade alloys Devendranath Ramkumar K, Naren S V Karthik Paga V R Tiwari A, Arivazhagan N, Journal of Manufacturing Processes WOS 15266125 2.231
495 2016 SMEC Effect of Hygrothermal Loading on Laminate Composites Deepa A, A Deepa, K Padmanabhan, G Raghunadh, Indian Journal of Science and Technology Scopus 9746846  
496 2016 SMEC Effect of multiple laser shock peening on the mechanical properties of ETP copper Ayush Bhattacharya, V K Manupati, Siddharth Madan, Chirag Dashora, S Prabhakaran, V K Manupati, Internternatioanl Conference on Mechanics Materials Science and Engineering      
497 2016 SMEC Effect of Ni3Al Addition and Heating Mode on the electrochemical response on Austenitic and Ferritic Stainless Steels Raja Annamalai, Anish Upadhyaya, Dinesh K Agrawal, Powder metallurgy and metal ceramics WOS 15739066 0.342
498 2016 SMEC Effect of post weld heat treatment on the microstructure and tensile properties of activated flux TIG welds of Inconel X750 Ramkumar K D, Ramanand R Ameer A Simon K A, Arivazhagan N, Materials Science and Engineering A WOS 9215093 3.08
499 2016 SMEC Effect of winglets induced tip vortex structure on the performance of subsonic wings Gautham Narayanan, Bibin John, Aerospace Science and Technology WOS 12709638 2.057
500 2016 SMEC Effects of filler metals on the segregation mechanical properties and hot corrosion behaviour of pulsed current gas tungsten arc welded super austenitic stainless steel Devendranath Ramkumar K, Arivazhagan N, Chandra S Dev S, Chandrasekhar A Srivastava A Preyas H, Journal of Manufacturing Processes WOS 15266125 2.231
501 2016 SMEC Effects of organizational justice on teachers job satisfaction An empirical research at self financing arts and science colleges in Vellore district Rajkumar, Suganya, Ravikumar B, Man In India Scopus 251569  
502 2016 SMEC Electro-Pneumatic Shifting System and Gear Control Unit for a Sequential Gearbox Siddharth Dahiya, B Ashok, Adithya Asok Sharma, Kamalkishore Vora, Ritesh Tekriwal, C Kavitha, SAE Technical Series Scopus 1487191  
503 2016 SMEC Establishing Temperature Dependency of the Aerodynamic Drag using CFD and Experimental Analysis Ajinkya Krishnakumar, Parth Sharma, Yash Tambi, B Ashok, Indian Journal of Science and Technology Scopus 9746846  
504 2016 SMEC Evaluating the effect of side grooving parameters on critical SZW Chaitali Nalawade, Sanjeev Saxena, Akash Mohanty, Engineering Fracture Mechanics WOS 137944 2.39
505 2016 SMEC Experimental investigation of machining parameter under MQL milling of SS304 Gatade VT, Patil V T, P Kuppan, Balan, R Oyyaravelu, Materials Science and Engineering WOS 9215093  
506 2016 SMEC Experimental Investigation on Engine Performance and Emission Characteristics using Pongamia Orange Oil Blends Sreenivasuliu N, Govindarajulu K, John Samuel K, Rajsekhar Y, Edison G, International journal of Renewable Energy research Scopus ‎13090127  
507 2016 SMEC Experimental studies on drying of orange peel in solar tunnel dryer using sensible heat storage material Bukke, S., Basant Kumar Pillai, B., Karthikeyan, A.K. 2016 International Conference on Energy Efficient Technologies for Sustainability, ICEETS 2016      
508 2016 SMEC Fabrication of cellulose based scaffolds for bone regeneration application Priya Ganesan, I Manjubala, Amruta P Barhanpurkar, Mohan R Wani, U Narendra Kumar, International Journal of ChemTech Research Scopus 24559555  
509 2016 SMEC Finite element vibration analysis of rotating laminated composite beam with varying cross-section using HSDT Arumugam, A.B., Rajamohan, V., Pandey, A., Sudhagar, P.E. International Journal on Interactive Design and Manufacturing WOS 19552505  
510 2016 SMEC Flexural Behaviour of Jute-Reinforced Hybrid polymer matrix composite Graceraj, Venkatachalam, Garg, Vimal, Afsan, Composites Mechanics computations applications Scopus 21522073  
511 2016 SMEC Formal to Casual- Usage of Laptop Among Students- An Eye Opener S Paul Silvian, Priyanka G, Sayeda Begum, Gemini V Joy, S Senthil Kumar, Journal of Multidisciplinary Research in Healthcare Non- Scopus 23938544  
512 2016 SMEC Fuzzy Logic based Speed Control of BLDC Motor on Sensorless Technique for Space Applications K Neethu, Giriraj Mannayee, M Boopathi, T C Kanish, Indian Journal of Science and Technology Scopus 9746846  
513 2016 SMEC Gaseous alternative fuels for SI engines - A technical review Ravi K, Porpatham E, Pradeep Bhasker J, Mathew S, International Journal of Pharmacy and Technology Scopus 0975766X  
514 2016 SMEC High Temperature Corrosion studies on Pulsed Current Gas Tungsten Arc Welded Alloy C-276 in Molten Salt Environment Manikandan M, Arivarasu M Arivazhagan N, Puneeth T Sivakumar N, Arul Murugan B Sathishkumar M, Sivalingam S, IOP Conference Series Materials Science and Engineering Scopus 1757899X  
515 2016 SMEC High Temperature Wear Behaviour of Nano/Micro B4C Reinforced Aluminium Matrix Composites Fabricated by an Ultrasonic Cavitation-Assisted Solidification Process Harichandran, R., Selvakumar, N., Venkatachalam, G. Transactions of the Indian Institute of Metals WOS 9751645 0.502
516 2016 SMEC Impact Damage Hardness And Tribology Characterization Of Epoxy Resin Based Composites Reinforced With Basalt Fibers In Combination With Tio2 Baso4 And Sic Narendiranath Babu T, R V Mangalaraja, S Saravanan, Rama Prabha D, Journal of Chemical Technology and Metallurgy Scopus 13147978  
517 2016 SMEC Impact of initial partial sequence in the makespan, in permutation flow shop scheduling heuristic algorithms - an analysis Baskar, A., Anthony Xavior, M., Dhanasakkaravarthi, B. Indian Journal of Science and Technology Scopus 9746846  
518 2016 SMEC Impacts of climate warming on atmospheric phase transition mechanisms Varotsos, C.A., Ghosh, S. Theoretical and Applied Climatology WOS 14344483 2.433
519 2016 SMEC Implementation of Fuzzy Logic Control in Semiactive Suspension for a Vehicle Using MATLAB SIMULINK Rasal, S., Jaganmohan, J., Agashe, S., Wani, K.P. SAE Technical Papers Scopus 1487191  
520 2016 SMEC Implementation of Real Time Low Voltage System for Enhancement of Safety in an Electric vehicle Manoj Rohit Vemparala, Santosh Ram Somasundaram, Saket M Anandkrishnan, B Ashok, C Kavitha, IEEE digital Explorer      
521 2016 SMEC Influence of aspect ratio on the thermal performance of rectangular shaped micro channel heat sink using CFD code Raghuraman, D.R.S., Thundil Karuppa Raj, R., Nagarajan, P.K., Rao, B.V.A. Alexandria Engineering Journal Scopus 11100168  
522 2016 SMEC Influence of laser peening on the tensile strength and impact toughness of dissimilar welds of Inconel 625 and UNS S32205 Ramkumar, K.D., Kumar, P.S.G., Krishna, V.R., Chandrasekhar, A., Dev, S., Abraham, W.S., Prabhakaran, S., Kalainathan, S., Sridhar, R. Materials Science and Engineering A WOS 9215093 2.647
523 2016 SMEC Integration of Process Planning and Scheduling using Mobile-Agent based approach in a Networked Manufacturing Environment V K Manupati, Manuela Cunha, Paulo Avila, Goran Putnik, M K Tiwari, International Journal of Computers and Industrial Engineering WOS 3608352 2.623
524 2016 SMEC Investigating structure generated turbulence using an unmanned aerial vehicle: A prelude to optimal ventilation strategies in India’s upcoming smart cities Ghosh, S., Kochhar, K., Sharma, A., Kaushal, S., Agrawal, J., Garg, A., Kumar, A., Dugar, Y. Smart and Sustainable Built Environment Scopus 20466099  
525 2016 SMEC Investigation on effects of tooth profile modifications and transmitted torque on tooth engagements of a pair of helical gears Devendiran S, Harsha Teja, Praveen, DN Reddy, International Journal of Applied Engineering Research Scopus 9739769  
526 2016 SMEC Investigation on fatigue strength of the jute fiber reinforced hybrid polymer matrix composites Graceraj, Venkatachalam, Gautham Shankar, Krishnakumar, UPB Scientific Bulletin Series D Mechanical Engineering Scopus    
527 2016 SMEC Investigation on mechanical behaviour and vibration characteristics of thin walled glass carbon hybrid composite beams under fixed free boundarycondition Murugan, R., Ramesh, R., Padmanabhan, K. Mechanics of Advanced Materials and Structures WOS 15376532 0.773
528 2016 SMEC Investigations on tensile strength of banana fibre reinforced hybrid polymer matrix composites venkatachalam, Renjith, Renjith, Nilay, Vasan, Rajaannamalai, Engineering Review Scopus 13309587  
529 2016 SMEC Investigations on the machinability of Waspaloy under dry environment Deepu J, Kuppan P, Sbalan AS, R Oyyaravelu, Materials Science and Engineering Scopus 9215093  
530 2016 SMEC Light weight BIW solutions for improving functional properties A review Shinde P, Ravi K, Nehru N, Pawar S, Balakrishnan B, Nair V, SAE Technical Papers Scopus 1487191 0.35
531 2016 SMEC Machinability studies on INCONEL 718 Xavior, M.A., Patil, M., Maiti, A., Raj, M., Lohia, N. IOP Conference Series: Materials Science and Engineering Scopus 1757899X  
532 2016 SMEC Mahalanobis distance-the ultimate measure for sentiment analysis B Valarmathi, N Srinivasa Gupta, Palinisamy V, International Arab Journal of Information Technology WOS 23094524 0.724
533 2016 SMEC Modelling and multi objective optimization of WEDM of commercially Monel super alloy using evolutionary algorithms Bhargav Bal Reddy, Vishnu Vardhan Reddy, Sajja Varun, Rajyalakshmi G, IOP Conf. Series Materials Science and Engineering Scopus 1757899X  
534 2016 SMEC Molybdenum disulfide nanoflakes through Li-AHA assisted exfoliation in an aqueous medium Bindhu B, Sharu B K, Gopika M S, P K Praseetha, K Veluraja, RSC Advances Scopus 20462069 3.108
535 2016 SMEC Multipass Welding On Inconel Material with Pulsed Current Gas Tungsten Arc Welding Harinadh, V., Edison, G., Akella, S., Reddy, L.S. and Buddu, R.K. Materials Today: Proceedings Scopus 22147853  
536 2016 SMEC Multi-perspective integrated framework of critical success factors for supporting on-line shopping Varela, M. L. R., M. F. Ferreira, G. G. Vieira, V. K. Manupati, K. Manoj In Information Systems and Technologies (CISTI)   9789899843462   
537 2016 SMEC Nanofluid heat transfer under mixed convection flow in a tube for solar thermal energy applications Y Raja Sekhar, K V Sharma, Subash Kamal, Environmental Science and Pollution research WOS 16147499 2.741
538 2016 SMEC Numerical analysis of CI engine to control emissions using exhaust gas recirculation and advanced start of injection M Senthil Kumar, C Ramesh Kumar, P Kashyap Chowdary, Prabhakara Rao Ganji, S Srinivasa Rao, Alexandria Engineering Journal Scopus 11100168  
539 2016 SMEC Numerical characterization of compact pipe specimen for stretch zone width assessment G Mahajan, Akash Mohanty, S Saxena, Fatigue and Fracture of Engineering Materials and Structures WOS 14602695 2.533
540 2016 SMEC Numerical modelling of thermal phenomenon in friction stir welding of aluminum plates Vignesh R V, Padmanaban R, Arivarasu M, Thirumalini S, Gokulachandran J, Ram M S S S, IOP Conference Series Materials Science and Engineering Scopus 1757899X  
541 2016 SMEC Numerical Prediction of NOx in the Exhaust of a CI Engine Fuelled with Biodiesel Using In-Cylinder Combustion Pressure Based Variables Anand Krishnan Manoharan, B Ashok, Saravanan Kumarasamy, SAE Technical Series Scopus 1487191  
542 2016 SMEC Optimal cycle time and inventory decisions in coordinated and non-coordinated two-echelon inventory system under inflation and time value of money Dega Nagaraju, A Ramakrishna Rao, S Narayanan, P Pandian, International Journal of Production Research WOS 1366588X 2.325
543 2016 SMEC Optimality of cycle time and inventory decisions in a coordinated and non-coordinated three-echelon supply chain under exponential price dependent demand Burra Karuna Kumar, Dega Nagaraju, S Narayanan, International Journal of Logistics Systems and Management Scopus 17427975  
544 2016 SMEC Optimization of incidence angle for augmented performance of solar collector: A case study for Vellore Muthuswamy, N., Kochhar, K., Kumar, A. 2016 International Conference on Energy Efficient Technologies for Sustainability, ICEETS 2016      
545 2016 SMEC Optimizing and Validating the Engine Performance and Emission Parameters on Engine Dynamometer through 1D Simulation of a Multi-Cylinder CNG Engine Jadhav, V., Kanchan, S., Thipse, S., Kavathekar, K., Dsouza, A., Sonawane, S. SAE Technical Papers Scopus 1487191  
546 2016 SMEC Performance evaluation of honeycomb structured PVC packed humidifier in a Humidification-Dehumidification Desalination Plant amrit raj, rohan bajaj, srinivas t, Energy Efficient Technologies for Sustainability   978-3-03785-782-3  
547 2016 SMEC Polymer composites for thermal management- a review M A Vadivelu, C Ramesh Kumar, Girish M Joshi, Composite Interfaces Scopus 15685543  
548 2016 SMEC Predicting surface tension for vegetable oil and biodiesel fuels Thangaraja J, Anand K, Pramod S Mehta, RSC Advances Scopus 20462069 3.1
549 2016 SMEC Process parameters effect on the strength of Friction Stir Spot Welded AA6061 Padmanaban R, Vaira Vignesh R, Arivarasu M, Karthick K P, Abirama Sundar A, ARPN Journal of Engineering and Applied Sciences Scopus 18196608 0.37
550 2016 SMEC Productivity improvement using time study analysis in a small scale solar appliances industry- A case study Sai Nishanth Reddy A, Srinath Rao P, Rajyalakshmi G, Source of the Document ARPN Journal of Engineering and Applied Sciences Scopus 18196608 0.391
551 2016 SMEC Protein and Carbohydrate Biopolymers for Biomedical Applications Sudhanshu Verma, U Narendra Kumar, I Manjubala, International Journal of PharmTech Research Scopus 24559563  
552 2016 SMEC Real-time rule-based scheduling system for integrated delivery in a semiconductor manufacturing using evolutionary algorithm-based simulation approach Manupati, V.K., Revanth, A.S., Srikanth, K.S.S.L., Maheedhar, A., Sreekara Reddy, M.B.S. Advances in Intelligent Systems and Computing WOS 21945357  
553 2016 SMEC Redesign of an in-market food processor for manufacturing cost reduction using DFMA methodology HARLALKA A, NAIJU CD, JANARDHANAN MN, NIELSEN I, Production and Manufacturing Research WOS 21693277  
554 2016 SMEC Simulation analysis of hydrogen fuelled homogeneous charge compression ignition HCCI engine Chaitanya Jakati, M Mohamed Ibrahim, Aditya Patil, Amol Kulkarni, International Journal of ChemTech Research Scopus 24559555  
555 2016 SMEC Simulation of Thermal Stress of SS316 using ANSYS Harinath Vemanaboina, Harinadh Vemanaboina, Edison Gundabattini, Suresh Akella, IJSRD National Conference on Recent Trends Innovations in Mechanical Engineering   23210613  
556 2016 SMEC Social network analysis based evolutionary algorithimic approach to identify the influence of hubs on flexible scheduling problems M B S Sreekar Reddy, V K Manupati, Ratnam CH, Sharma I V, V K Manupati, International Conference on Industrial Engineering and Operations Management      
557 2016 SMEC Solar photovoltaic (PV) system sizing: Considerations from name plate specifications Nikhil, P.G., Subhakar, D., Singh, S.J. 2015 International Conference on Control, Communication and Computing India, ICCC 2015      
558 2016 SMEC Stability improvement of thin isotropic cylindrical shells with partially filled soft elastic core subjected to external pressure A P Dash, R Velmurugan, MSR Prasad, Rahul Singh Sikarwar, Thin walled structure WOS 2638231 1.482
559 2016 SMEC Structural Analysis of Pick-Up Truck Chassis using Fem Baskar P, Rahul V, Nirmal R U, Noraje Aniket Arunkumar, International Journal of ChemTech Research Scopus 2455-9555 0
560 2016 SMEC Studies on the structure-property relationships and corrosion behaviour of the activated flux TIG welding of UNS S32750 Ramkumar, K.D., Goutham, P.S., Radhakrishna, V.S., Tiwari, A., Anirudh, S. Journal of Manufacturing Processes WOS 15266125 1.771
561 2016 SMEC Study of the Injector Drive Circuit for a high pressure GDI Injector Abhishek Kumar, B Ashok, Neelkantha Banerjee, Neelkantha Banerjee, Abhijeet Kumar, IEEE International Conference on Recent Advances and Innovations in Engineering      
562 2016 SMEC Supply Chain Coordination Models A Literature Review Burra Karuna Kumar, Dega Nagaraju, S Narayanan, Indian Journal of Science and Technology Scopus 9746846  
563 2016 SMEC Suture materials - Current and emerging trends Dennis, C., Sethu, S., Nayak, S., Mohan, L., Morsi, Y.., Manivasagam, G. Journal of Biomedical Materials Research - Part A WOS 15524965 3.369
564 2016 SMEC Synthesis and characterization of AA 6061- Graphene - SiC hybrid nanocomposites processed through microwave sintering Jauhari, S., Prashantha Kumar, H.G., Anthony Xavior, M. IOP Conference Series: Materials Science and Engineering Scopus 1757899X  
565 2016 SMEC Systematic layout planning and balancing of engine production processes for after test and after paint assembly lines R Durga Prasada, K Vishwa Kumar, P A Jeeva, International Journal of Vehicle Structures and Systems Scopus 9753540  
566 2016 SMEC Testing Of Novel Remote Controlled Electrically Deepa A, Naveen Krishna Baru, Sagarnath G, ICDAMS      
Operated Hydraulic Jack
567 2016 SMEC The Mechanix Behind the Circulation of Low Quality Music Offerings in a Digital World Deepak Paul, Xavier M J, Venugopal Pulidindi, Mediterranean Journal of Social Sciences Scopus 20392117  
568 2016 SMEC THE RISE OF E-COMMERCE AND ITS SUBSEQUENT IMPACT ON THE INDIAN RETAIL MARKET Sijoy Syriac, JNVRaghuram, RaghuramJ, International Journal of Management WOS  09766510   
569 2016 SMEC Thermal comfort analysis of a proposed design for a sustainable living space on Mars S Ghosh, A Jadeja et al, Intelligent Buildings International WOS 17566932 0.4
570 2016 SMEC Thermodynamic analysis of torrefaction process M Senthil kumar, Ashutosh singh, jithu V P, R Anand Murali, Aravind Revuru, International Journal of Renewable energy research Scopus ‎13090127  
571 2016 SMEC Thermodynamic approach to enhance the dispersion of graphene in epoxy matrix and its effect on mechanical and thermal properties of epoxy nanocomposites Monimoy Saha, Soumen Pal, Pankaj Tambe, Soumen Pal, Composite Interfaces Scopus 15685543 1.083
572 2016 SMEC Three-echelon supply chain with centralised and decentralised inventory decisions under linear price dependent demand Burra Karuna Kumar, Dega Nagaraju, S Narayanan, International Journal of Logistics Systems and Management Scopus 17427975  
573 2016 SMEC Transformer tank optimization using design of experiments Aniket Ranade, Rajkumar E, Indian Journal of Science and Technology Scopus 9746846  
574 2016 SMEC Wanna shopping online or offline Sudhakar R, Suraj Kushe Shekhar, Rajesh M, International Journal of Applied Business and Economic Research Scopus 9727302  
575 2016 SMEC Web-based decision system for effective process planning in network manufacturing environment M L R Varela, M LR VAREL, Araujo A F, G D PUTNIK, V K Manupati, Anirudh K V, Iberian Conference on Information Systems and Technologies Scopus 21660727  
576 2016 SMEC Wing Design for a Low Altitude Unmanned Aerial Vehicle A Nuanced Study of Aerodynamic Drag Deepa A, Rajkumar Vishnu Ganesh, Shashank Condoor, Sumit Sial, IEEE Explore Scopus    
577 2015 SMEC A Comparative Study Of Port Injected K Peda Chowdaiah, K Somasundaram, U B Gokulraj, B Ashok, S Denis Ashok, Journal of Chemical and Pharmaceutical Sciences Scopus 23498552  
And Carbureted Type Lpg-Diesel Dual Fuel Engine Using CFD Analysis
578 2015 SMEC A Comparative Study on the Tribological Performance of Lubricating Oils with Nanoparticles as Additives Archit Bimal Shah, P M Anil, Karan Kothari, International Journal of Applied Engineering Research Scopus 9739769  
579 2015 SMEC A Critical Review on Role of prison Environment on Stress and Psychiatric Symptoms among Prisoners Mohammad Mansoor, Syed Khalid Perwez, Ramaseshan h, Mediterranean Journal of Social Sciences Scopus 20392117  
580 2015 SMEC A model of solids friction factor for fluidized dense phase pneumatic conveying Niranjana Behera, V K Agarwal, Mark Jones, K C Williams, Powder technology WoS 325910 2.942
581 2015 SMEC A Parametric Optimization on Cutting Force during Laser Assisted Machining of Inconel 718 alloy Vignesh M, Venkatesan K, Ramanujam R, Kuppan P, Applied Mechanics and Materials Scopus 16627482  
582 2015 SMEC A review on the methods for solving the generalized group technology problem N Srinivasa Gupta, B Valarmathi, N Sowmiya, International Journal of Applied Engineering Research Scopus 9739769  
583 2015 SMEC A stochastic approach towards cycle time reduction for aircraft manufacturing assembly Vasantharaju C, Ashok B, Naiju CD International Journal of Product Lifecycle Management Scopus 17435129  
584 2015 SMEC An analysis on the influence of oil pocket shape and distribution on the reduction of friction in hydrodynamic lubrication Dileep P Menon, P M Anil, Prakash S Kulkarni, Annual CFD Symposium      
585 2015 SMEC An empirical study on the issues and challenges faced by HR professionals in an IT company in Karnataka India P Saravanan, Vasumathi, R Subashini, International Journal of Services and Operations Management Scopus 17442389  
586 2015 SMEC An Exploratory Study On The Effective R Subashini, LourthuRaj, International Journal of Management Non- Scopus 9766510  
Utilization Of Tacit Knowledge For Organizational Competencies
587 2015 SMEC An investigation on secondary force contacts of tooth pairs in conventional harmonic drives with involute toothed gear set Bikash Routh, Rathindranath Maiti, Ray A K, Sobczyk A, Proc IMechE Part C J Mechanical Engineering Science UK WoS 20412983 1.015
588 2015 SMEC Analysis of Low temperature Flashing Stage Desalination System Ramesh Kumar VK, Edison Gundabattini, Rajkumar P, Rajendran PR, International journal of Applied Engineering research Scopus 9739769  
589 2015 SMEC Analysis of mechanical properties of AMMC during WEDM process Rajyalakshmi G, Lalith Chaithanya, Mahesh Senapathi, Sasikanth T, Journal Applied sciences and Research Non- Scopus 23480416  
590 2015 SMEC Analysis of Surface Topography on Duplex Stainless Steel AISI 2205 for Deep Sea Applications A Vinoth Jebaraj, L Ajay Kumar, C R Deepak, International Journal of Surface Engineering and Interdisciplinary material science Scopus  21667233  
591 2015 SMEC CFD Modeling of Advanced Swirl Technique at Inlet-Runner for Diesel Engine Bhagyada Dhingra, B Ashok, Sparsh Sharma, Kamalkishore Vora, SAE Technical Series Scopus   0
592 2015 SMEC Comparative studies on the weldability microstructure and tensile properties of autogeneous TIG welded AISI 430 ferritic stainless steel with and without flux Ramkumar K D, Chandrasekhar A Singh A K, Ahuja S Agarwal A, Arivazhagan N, Rabel A M, Journal of Manufacturing Processes WOS 15266125 2.231
593 2015 SMEC Comparative study of augmentation in low temperature Kalina cycle systems deepak k, gupta avssks, srinivas t, International Journal of Application of Engineering and Technology Non- Scopus 23953594  
594 2015 SMEC Comparison of Fuzzy AHP And Topsis Shivang Gupta, Shaurabh Kumar Singh, Kunal Agrawal, Dega Nagaraju, ARPN Journal of Engineering and Applied Sciences Scopus 18196608  
Evaluations of Luggage Bag Design Alternatives
595 2015 SMEC Corporate Diversification and Financial Policy Consequences A Literature Survey G SRIRAM, SEETHA RAM VEDANTAM, N SUNDARAM, American International Journal of Research in Humanities Arts and Social Sciences Non- Scopus 23283696  
596 2015 SMEC Corrosion inhibition of reinforcing steel in simulated concrete pore solution- An ecofriendly approach E L Harish, S Karthikeyan, S K Sekar, International Journal of ChemTech Research Scopus 24559555 0.637
597 2015 SMEC Cost tolerance prediction models for electrochemical machining of metal matrix composites Ayyappan, Kalaimathi, Venkatachalam, Engineering Review Scopus 13309587  
598 2015 SMEC Design and development of variable valve actuation VVA mechanism concept for multi cylinder engine Jain A, Porpatham E, Ramdasi SS, Thipse SS, Marathe NV, SAE Technical Papers      
599 2015 SMEC Design and Development of V-grooved natural convection solar air heater for Odisha D V N Lakshmi, S S Mohapatra, A Satheesh, H Das, Applied Mechanics and Materials Scopus 16627482 0
600 2015 SMEC DESIGN OPTIMIZATION OF SUSPENSION GEOMETRY AND FRAME OF A FORMULA SAE CAR Prasoon Gupta, Alok Joshi, B Ashok, International Conference on Computer Aided Engineering      
601 2015 SMEC Development of DTC for induction motor fed with multilevel inverter improved PWM control strategy to maximise energy efficiency in EVHEVFCV S S Ramdasi, A Senthil Kumar, S S Thipse, N V marathe, International Review of Electrical Engineering Non- Scopus 18276660  
602 2015 SMEC Document Optimization of WEDM process for machining aluminium metal matrix composites Karthik C, Rajyalakshmi G, Duraisamy R, International Journal of Applied Engineering Research Scopus 9739769 0.181
603 2015 SMEC Dynamic Analysis of Beam with A Breathing Crack Suresha S, MALLIKARJUNA REDDY, International Journal of Engineering Research and Technology Scopus 09743154   
604 2015 SMEC Effect of alumina nanoparticles on the enhancement of impact and flexural properties of the short glass carbon fiber reinforced epoxy based composites Akash Mohanty, Vijay Kumar Srivastava, Fibers and Polymers WoS 18750052 1.022
605 2015 SMEC Effect of autogeneous GTA welding with and without flux addition on the microstructure and mechanical properties of AISI 904L joints Ramkumar K D, Arivazhagan N, Narayanan S, Varma J N Chaitanya G Choudhary A, Materials Science and Engineering A WoS 9215093 3.08
606 2015 SMEC Effect of Carbon Nanotube on thermo-mechanical properties of glass fiber epoxy laminated composites Shubham Gupta, Ariful Rahaman, International Journal of Scientific Research and Publications Non- Scopus 22503153  
607 2015 SMEC Effect of Filler Metals on the Structure Property Relationships of Continuous and Pulsed Current GTA Welds of AISI 430 and AISI 904L Ramkumar K D, Chandrasekhar A Singh A K Ahuja S, Arivazhagan N, Metallography Microstructure and Analysis Scopus 21929270 0
608 2015 SMEC Effect of Filler Metals on the Weldability and Mechanical Properties of Multi-pass PCGTA Weldments of AISI 316L Devendranath Ramkumar K, Maruthi Mohan Reddy P Raja Arjun B, Choudhary A Srivastava A, Arivazhagan N, Journal of Materials Engineering and Performance WoS 10599495  
609 2015 SMEC Effect of filler wires and direct ageing on the microstructure and mechanical properties in the multi-pass welding of Inconel 718 Devendranath Ramkumar K, Jagat Sai R Santhosh Reddy V, Gundla S Harsha Mohan T Saxena V, Arivazhagan N, Journal of Manufacturing Processes WOS 15266125 2.231
610 2015 SMEC Effect of flux addition on the microstructure and tensile strength of dissimilar weldments involving Inconel 718 and AISI 416 Devendranath Ramkumar K, Dev S, Saxena V Choudhary A, Arivazhagan N, Narayanan S, Materials and Design WOS 18734197 4.364
611 2015 SMEC Effect of GMAW process parameters on the influence of bead geometry and HAZ area on ASTM A516 grade 70 Low alloy Pressure vessel stee Anbarasan, R Oyyaravelu, P Kuppan, International Journal of TechnoChem Research Non- Scopus 23954248  
612 2015 SMEC Effect of Heating Mode and Electrochemical Response on Austenitic and Ferritic Stainless Steels Raja Annamalai, Anish Upadhyaya, Dinesh K Agrawal, Canadian Metallurgical Quarterly WoS 18791395 0.51
613 2015 SMEC Effect of Heating Mode and Y2O3 Addition on the Electrochemical Response on Austenitic and Ferritic Stainless Steels Raja Annamalai, Anish Upadhyaya, Dinesh Agrawal, Corrosion Engineering Science and Technology WoS 17432782 0.6
614 2015 SMEC Effect of non-ionic surfactant assisted modification of hexagonal boron nitride nanoplatelets on the mechanical and thermal properties of epoxy nanocomposites Monimoy Saha, Pankaj Tambe, Soumen Pal, Pravin Kubade, Geetha Manivasagam, M Anthony Xavior, Composite Interfaces WOS 15685543 1.083
615 2015 SMEC Effect of optimal weld parameters in the microstructure and mechanical properties of autogeneous gas tungsten arc weldments of super-duplex stainless steel UNS S32750 Devendranath Ramkumar K, Arivazhagan N, Ganesh Raj B Vignesh K Thiruvengatam G, Sudharshan S, Materials and Design WOS 18734197 4.36
616 2015 SMEC Effects of Sexual Advertising on Customer Buying Decisions RaghuramJ, Ruchika Mahajan, Aayush Poddar, IOSR Journal of Business and Management Non- Scopus 2278487X  
617 2015 SMEC Efficacy and safety of 1 terbinafine hydrochloride versus 2 sertaconazole cream in the treatment of tinea corporis A Sumitha, M Geetha, GH Shashikala, HS Somashekar, KS Chandan, International Journal of Basic and Clinical Pharmacology Non- Scopus 23192003  
618 2015 SMEC Employer Branding Dimensions A V Samuel Rajkumar, V Padmanand, P Ganesan, Pulidindi Venugopal, Global Management Review Non- Scopus 9739947  
Discriminant Analysis Approach In Campus Recruitment
619 2015 SMEC Energy Recovery Analysis through Adding Solid Food Waste Pulverizer for the Existing Biogas Plant Mohanasaravanan P S, Prabhakar M, Kannan C, Ganesh Karthikeyan M, Jayasingh T, International Journal of Engineering and Management Research Non- Scopus 22500758  
620 2015 SMEC Enhancement of bioactivity of titanium carbonitride nanocomposite thin films on steels with biosynthesized hydroxyapatite VV Anusha Thampi, B Subramanian, P Dhandapani, Geetha Manivasagam, International journal of nanomedicine WoS 11782013 4.3
621 2015 SMEC Environment-assisted degradation of beta titanium alloy Ti- 15V-3Cr-3Al-3Sn Shakya S, M Nageswara Rao, Pant B, Mohan MK, International Journal of ChemTech Research Scopus 24559555 0.637
622 2015 SMEC Evaluation of solution treated Ti-15-3 alloy for naval fastener applications Hanuma Reddy T, Nageswara Rao M, Mohan MK, Pant B, Journal of Corrosion Science and Engineering Scopus 14668858  
623 2015 SMEC Experimental Study on Cutting Tool Wear Behavior of Sintered Extruded P M Alloy Steels S Senthur Prabu, S Prathiba, Nipun Mittal, Sreelekh M K, M Sridhar Babu, K Vignesh, International Journal of ChemTech Research Scopus 24559555 0.637
624 2015 SMEC Fatigue Life Prediction and Durability test of passenger car Rheocast Aluminium Steering Knuckle Siddesh Gowda KG, Avjot Singh Ghai, Sagar Polisetti, Shashank Tiwari, B Ashok, Journal of Materials Science and Surface Engineering Scopus 23488956  
625 2015 SMEC Fine tuning of fuel maps using data acquisition system on a FSAE car Yagnavalkya Mukkamala, Sparsh Sharma, Ujjwal Pandey, International Journal of Applied Engineering Research Scopus 9739769  
626 2015 SMEC Flexural analysis of coir fibre reinforced hybrid polymer matrix composites venkatachalam, Gautham Shankar, Gupta, Gautham Shankar, Composites Mechanics computations applications Non- Scopus 21522073  
627 2015 SMEC Flow and thermal development in wire-wrapped fuel pin bundle of sodium cooled Fast Reactor during low flow conditions Govindha Rasu N, Velusamy K, Sundararajan T, Chellapandi P, Progress in Nuclear Energy WoS 1491970 1.313
628 2015 SMEC Friction Behaviour of Hybrid Composite of Basalt Fiber with Titanium Oxidem Barium Sulphate and Silicon Carbide Narendiranath Babu T, Manvel Raj T, Rama Prabha D, International Journal of ChemTech Research Scopus 2455-9555 0.637
629 2015 SMEC Fuzzy logic based fuel flow control system in a dual-fuel diesel engine V Abhijith, M Antony Richard, Renjith Ravi, S DENIS ASHOK, ASHOK B, Indian Journal of Science and Technology Scopus 0974-645  
630 2015 SMEC Health Monitoring of Surface Wear of TiN and AlCrN Based PVD Coated Bearings Using Statistical Values of Vibration Signals Niranjan Hiremath, Mallikarjuna Reddy, Shivasharanayya Swamy, Journal of Materials Science and Surface Engineering Scopus 2348-956  
631 2015 SMEC High Pressure Combined Solar Desalination System and Power Cycle Ramesh Kumar VK, Edison Gundabattini, Rajkumar P, Rajendran PR, ARPN Journal of Engineering and Applied Sciences Scopus 1819-608  
632 2015 SMEC Impact analysis of vehicle chassis made of polymer metal hybrids venkatachalam, Gautham Shankar, Varun, Vimal, Gautham Shankar, Composites Mechanics computations applications Non- Scopus 21522073  
633 2015 SMEC Impact of Consumers Decision Making Process on Purchasing of Mobile Phones Kavarthapu Vishnu Tejaswi, Seema A, GE International Journal of Management Research Scopus 23211709  
634 2015 SMEC Implementation of Karakuri Kaizen in Material Handling Unit Dhiyaneswar Rani, B Ashok, A K Saravanan, Mohammad Rafiq Agrewale, SAE Technical Papers Scopus   0
635 2015 SMEC Influence of filler metals in the control of deleterious phases during the multi-pass welding of Inconel 718 plates Devendranath Ramkumar K, Jagat Sai R Sridhar G Santhosh Reddy V, Prabaharan P, Arivazhagan N, Sivashanmugham N, Acta Metallurgica Sinica English Letters WOS 21941289 0.584
636 2015 SMEC Influence of Forging Parameters on the Mechanical Behavior and Hot Forgeability of Aluminium Alloy PK AjeetBabu, M R Saraf, K C Vora, Suraj ManiChaurasiya, Kuppan, Materials Today: Proceedings Scopus 22147853  
637 2015 SMEC Influence Of Mql Application On Surface Akhil Soman, Vignesh Shanbhag, International Journal of Mechanical and Production Engineering Non- Scopus 23212071  
Roughness Cutting Force And Tool Wear For Milling Of Monel 400 Sakthivel M, P Kuppan
638 2015 SMEC Influence of reinforcement shape on flexural properties of additive manufactured multi material polymer structure Sugavaneswaran M, Arumaikkannu G, Additive Manufacturing Journal Scopus 22148604 0
Vijay Anand R,
639 2015 SMEC Influence of thermomechanical processing on biomechanical compatibility and electrochemical behavior of new near beta alloy Ti206 Nb136 Zr05 V Mohsin Talib Mohammed, Zahid A Khan, Geetha Manivasagam, Arshad N Siddiquee, International journal of nanomedicine WoS 11782013 4.3
640 2015 SMEC Influence of thermomechanical processing on microstructure mechanical properties and corrosion behavior of a new metastable beta titanium biomedical alloy Mohsin Talib Mohammed, Zaid A Khan, M Geetha, Arshad N Siddiquee, Prabhash Mishra, Bulletin of Materials Science Scopus 9737669 0.899
641 2015 SMEC Investigation and Evaluation Of Deepa A, Kaustav Chakraborty, Disha Sarkar, NASASXIX      
Hygrothermal Effects On GFRP And CFRP
642 2015 SMEC Investigations On Effect Of Lean Combustion Ravi K, Porpatham E, Pradeep Bhasker J, International Seminar on Renewable Energy and Sustainable Development Non- Scopus    
On Performance And Emission Characteristics For LPG Engine
643 2015 SMEC Investigations on structure property relationships of activated flux TIG weldments of super-duplex austenitic stainless steels Devendranath Ramkumar K, Bajpai A, Raghuvanshi S, Arivarasu M, Singh A, Materials Science and Engineering A WoS 9215093 3.08
644 2015 SMEC Investigations on Structure Property Relationships of Inconel 718 and AISI 430 Dissimilar Weldments Ramkumar K D, Saxena V Mohan H Pandey R, Metallography Microstructure and Analysis Scopus 21929270 0
645 2015 SMEC Investigations on structure-property relationships of activated flux TIG weldments of super duplex austenitic stainless steels Devendranath Ramkumar K, Bajpai A Raghuvanshi S Singh A, Chandrasekhar A, Arivazhagan N, Materials Science and Engineering A WoS 9215093 3.08
646 2015 SMEC Investigations on the structure - Property relationships of electron beam welded Inconel 625 and UNS 32205 Devendranath Ramkumar K, Arivazhagan N, Oza S Saxena V Hidad P, Sridhar R Periwal S, Materials and Design WOS 18734197 4.36
647 2015 SMEC Lean Sigma A Turnaround Strategy For Service Murugavel R, R S Mani, K Revathi, Intl Jl of Mgt and Social Science Research Review Non- Scopus 23496746  
Sector Organizations
648 2015 SMEC Metallurgical and mechanical characterization of dissimilar welds of austenitic stainless steel and super-duplex stainless steel - A comparative study Devendranath Ramkumar K, Singh A, Solanki T, Arivarasu M, Arivazhagan N, Journal of Manufacturing Processes WOS 15266125 2.231
649 2015 SMEC Metallurgical and mechanical characterization of electron beam welded super-duplex stainless steel UNS 32750 Ramkumar K D, Mishra D Vignesh M K Raj B G, Arivazhagan N, Naren S V Kumar S S, Journal of Manufacturing Processes WOS 15266125 2.231
650 2015 SMEC Microstructure mechanical properties and electrochemical behavior of a novel biomedical titanium alloy subjected to thermo-mechanical processing including aging Mohsin Talib Mohammed, Zahid A Khan, M Geetha, Arshad N Siddiquee, Journal of alloys and compounds WOS 18734669 3.133
651 2015 SMEC Novel Approach to Automatically Generate Feasible Assembly Sequence Aniket Kavlekar, Ishan Kossambe, Arun Tom Mathew, Indian Journal of Science and Technology Scopus 9745645  
652 2015 SMEC Numerical investigation of double-diffusive mixed convection laminar flow in two sided lid driven porous cavity Lokesh Agarwal, Satheesh A, C G Mohan, Heat Transfer Asian Research Scopus 15231496 0
653 2015 SMEC Optimal distribution of discrete heat sources under natural convection using ANN - GA based technique Tapano Kumar Hotta, S P Venkateshan, Heat Transfer Engineering WoS 15210537 1.235
654 2015 SMEC Optimal lot sizing and inventory decisions in a centralised and decentralised two echelon inventory system with price dependent demand Dega Nagaraju, A Ramakrishna Rao, S Narayanan, International Journal of Logistics Systems and Management Scopus 17427975  
655 2015 SMEC Optimality Of Inventory Decisions In A Joint Two-Echelon Inventory System With And Without Fuzzy Demand Vineet Mittal, Dega Nagaraju, S Narayanan, International Journal of Applied Engineering Research Scopus 9739769  
656 2015 SMEC Optimization of Gasoline Engine Flywheel using Alternate Materials for Improving Performance Characteristics Shubham Gupta, Karan Kothari, Jay P Mishra, B Ashok, Indian Journal of Science and Technology Scopus 9745645 0
657 2015 SMEC Optimization of MFAAF Process Parameters using Particle Swarm Optimization Kanish T C, Vijith Kalathil, Senthil Kumar S, International Journal of Applied Engineering Research Scopus 9739769  
658 2015 SMEC Perception of Doctors on the Acceptance and Use of Telemedicine Sivaji Jinka, Pulidindi Venugopal, Global Management Review Non- Scopus 9739947  
659 2015 SMEC Performance characteristics of electroless Ni-P-Cu and Ni-P-Cu-pvp composite coatings Hareesh P, S Karthikeyan, K Raja, P A Jeeva, International Journal of Applied Engineering Research Scopus 9739769  
660 2015 SMEC Powder-Mixed EDM Machining of Aluminium-Silicon Carbide Composites Khalid Hussain Syed, Anuraag G P, Anuraag G P, Indian Journal of Science and Technology Scopus 9745645  
661 2015 SMEC Power spectral density analysis of pressure fluctuation in pneumatic conveying of powders Niranjana Behera, V K Agarwal, Mark Jones, K C Williams, Particulate Science and Technology WOS 15480046 0.784
662 2015 SMEC Prediction of tensile strength on hybrid composite of basalt fiber with titanium oxide barium sulphate and silicon carbide Narendiranath Babu T, Ditto Ramesh, Suryavishnu, Rama Prabha D, International Journal of ChemTech Research Scopus 24559555 0.637
663 2015 SMEC Preparation and evaluation of the cytotoxic nature of TiO2 nanoparticles by direct contact method M Chellappa, U Vijayalakshmi, U Anjaneyulu, M Geetha, International journal of nanomedicine WoS 11782013 4.3
664 2015 SMEC Pulsed current and dual pulse gas metal arc welding of grade AISI 310S austenitic stainless steel Mathivanan A, Devakumaran K, A senthil kumar, Defence Technology Scopus 22149147 0
665 2015 SMEC Reconfiguration of Networked Seru Production systems in an Indian Perspective V K Manupati, T Vemkata Deepthi, K Ramakotaiah, S S Rao, International Conference on Industrial Engineering and Operations Management      
666 2015 SMEC Reducing Starting Current for Existing Commercial Vehicle Engines Suresh Kumar Gurusamy, B Ashok, Chandrasekar Rajagopalan, R Sateesh Kumar, SAE Technical Papers Scopus   0
667 2015 SMEC Selection and Prioritization of Luggage Bag Designs Using Combined AHP and TOPSIS Methodology Shivang Gupta, Shaurabh Kumar Singh, Kunal Agrawal, Dega Nagaraju, International Journal of Applied Engineering Research Scopus 9739769  
668 2015 SMEC Single Phase Flow and Heat Transfer and Pressure Drop Measurements in Doubly Enhanced Tubes Ratnesh Raj, Yagnavalkya Mukkamala, Narender Shankar Lakshman, International Journal of Thermal Sciences Scopus 12900729  
669 2015 SMEC Sliding wear characteristics of Basalt Fiber with GE Epoxy Al2O3 Sic hybrid Composites for Journal bearing material using Fish Oil Lubricant Narendiranath Babu T, Manvel Raj T, Rama Prabha D, International Journal of ChemTech Research Scopus 24559555 0.637
670 2015 SMEC Social media and brand loyalty Gangadhar R, Venugopal Pulidindi, Kumar P Vijaya, International Journal of Physical and Social Sciences Scopus 22495894  
671 2015 SMEC Solar Thermal Power and Desalination System Ramesh Kumar VK, Edison Gundabattini, Rajkumar P, Rajendran PR, International Journal of Applied Engineering Research Scopus 9739769  
672 2015 SMEC Structure-property relationships of PCGTA welds of Inconel X750 in as-welded and post-weld heat treated conditions - A comparative study Ramkumar K D, Krishnan S R Ramanand R, Logesh S Satyandas T Ameer A, Arivazhagan N, Journal of Manufacturing Processes WOS 15266125 2.231
673 2015 SMEC Studies on behaviour of a DI diesel engine fuelled with bio oil biodiesel emulsions R Prakash, R K Singh, S Murugan, International Journal of Oil Gas and Coal Technology WoS 17533317 0.582
674 2015 SMEC Studies on microstructure and mechanical properties of keyhole mode NdYAG laser welded Inconel 625 and duplex stainless steel SAF 2205 Devendranath Ramkumar K, Kuppan P, Kothari K Sridhar R, Kumar P, Sai Radhakrishna V, Journal of Materials Research WOS 20445326 1.631
675 2015 SMEC Studies on the weldability microstructure and mechanical properties of flux assisted Nd YAG laser welds of AISI 904L K Devendranath Ramkumar, Gangineni Chaitanya, Jelli Lakshmi Narasimha Varma, N Arivazhagan, R Oyyaravelu, Journal of Materials Research WOS 20445326 1.631
676 2015 SMEC Synthesis and In-Vitro Electrochemical Study of Composite Coatings on Implant by Electrophoretic Deposition M Chellappa, U Vijayalakshmi, U Anjaneyulu, M Geetha, Journal Of The Indian Chemical Society Scopus 194522 0
677 2015 SMEC The influence of emotional intelligence on work-life balance of faculty members performance and satisfaction in the educational institutions using multivariate analysis India-an empirical study T Sagaya Mary, Vasumathi, R Subashini, international journal of Services and Operations Management Scopus 17442389  
678 2015 SMEC The mechanical buckling of Assessment of curvilinear composite laminates with material discontinuities and environmental effects A Venkatachari, S Natarajan, S Natarajan, M Ganapathi, M Haboussi, Composite Structures WoS  02638223 4.101
679 2015 SMEC The role of strategic human resource management SHRM impacting employees performance through perceived organisational support in a manpower agency of international airlines at Chennai International Airport Tamil Nadu India - an empirical study C Colin Crispin, Vasumathi, R Subashini, international journal of Services and Operations Management Scopus 17442389  
680 2015 SMEC Theoretical Investigation of Waste Heat Recovery from an IC Engine Using Vapor Absorption Refrigeration System and Thermoelectric Converter Ankit Sonthalia, Somesh Reddy, C Ramesh Kumar, Keval Kamani, Heat Transfer Asian Research Scopus 15231496  
681 2015 SMEC Theoritical Study on Various Types of NACA Aerofoil Profiles A Critical Review V Ajay, B Venkateshwarlu, Mohan Jagadeesh Kumar, Innovations in Mechanical Engineering     0
682 2015 SMEC Thermal performance of biomass plant with triple generation system Srinivas T, Reddy BV, Gupta , International Journal of Green Energy WoS 15435083 1.454
683 2015 SMEC Thermodynamic analysis of 150 MW thermal power plant with combined effect of constant steam inlet steam pressure 130 bar and different steam inlet temperatures in circulated fluidized bed combustion technology power plant Naveen Kumar, Edison Gundabattini, Ratan P Bagade, International journal of Applied Engineering research Scopus 9739769  
684 2015 SMEC Tool Wear Analysis of Al 6061 reinforced with 10 wt Al2O3 Using High Hardened Inserts Vignesh M, Venkatesan K, Ramanujam R, Vijayan S, Applied Mechanics and Materials Scopus 16627482  
685 2015 SMEC Tribological and corrosion behaviors of warm-and hot-rolled Ti-13Nb-13Zr alloys in simulated body fluid conditions Taekyung Lee, Geetha Manivasagam, Eshaan Mathew, Santhosh Rajaraman, Ashok Kumar Singh, Chong Soo Lee, International journal of nanomedicine WoS 11782013 4.3
686 2015 SMEC Use of new multi-layered coated carbide insert for machining aluminium metal matrix composites reinforced with alumina particles experimental approach Ramanujam R, Rahul A, Manu Antony, Ram Praful C, International Journal of Applied Engineering Research Scopus 9739769  
687 2015 SMEC Variation Of Gaseous Fuel Flow Rate In A V Abhjith, U B Gokulraj, K Somasundaram, B Ashok, S Denis Ashok, C Ramesh Kumar, Journal of Chemical and Pharmaceutical Sciences Scopus 23498552  
Dual-Fuel Diesel Engine Using Fuzzy Logic
688 2015 SMEC Vibration analysis of laminated composite sandwich plate using finite element analysis Manoharan R, Shedbale Indrajeet B, Charapale Utkarsh D, Kurhe Nikhil M, International Journal of Applied Engineering Research Scopus 9739769  
689 2015 SMEC Wear Behaviour of Hybrid Composite of Basalt Fiber with Titanium Oxide Barium Sulphate and Silicon Carbide Narendiranath Babu T, Ditto Ramesh, Rama Prabha D, Lavanya T, International Journal of ChemTech Research Scopus 24559555 0.637
690 2015 SMEC Wear studies on plasma sprayed Al2O3 and 8mole of Yttrium-stabilized ZrO2 composite coating on biomedical Ti 6Al 4V alloy for orthopedic joint application Perumal Ganapathy, M Geetha, Asokamani Rajamanickam, Alagumurthi Natarajan, International journal of nanomedicine WoS 11782013 4.3
691 2014 SMEC A CFD investigation on fluid dynamic gauging Bharani Kumar K V, R Thundil Karuppa Raj, Dhyan Shankar M P, ARPN Journal of Engineering and Applied Sciences Scopus 1819-6608  
692 2014 SMEC A comparative study on analytical and experimental buckling stability of metal matrix composite columns with fixed & hinged ends Narasimha, G. Bala, M. Vamsi Krishna, Anthony M. Xavior International Journal of Applied Engineering Research Scopus 0973-9769  
693 2014 SMEC A questionnaire survey of pediatric inflammatory bowel disease in India Malathi Sathiyasekaran, Sumathi Bavanandam, Srinivas Sankaranarayanan, Neelam Mohan, M Geetha, Nishanth Wadhwa, Indian Journal of Gastroenterology Scopus 2548860  
694 2014 SMEC A typical manufacturing plant layout design using CRAFT algorithm Hari Prasad N, Rajyalakshmi G, Srinivasula reddy A, Procedia Engineering Scopus 1877-7058  
695 2014 SMEC Aerodynamic study of formula SAE car Sneh Hetawal, Mandar Gophane, B.K. Ajay, Yagnavalkya Mukkamala, Procedia Engineering Scopus 1877-7058  
696 2014 SMEC Analysis of strain hardening behaviour of cast aluminium alloy 354 subjected to artificial ageing at various temperatures Eswar A, M Nageswara Rao, Babu GD, Gupta A, Advanced Materials Research Scopus 1662-8985  
697 2014 SMEC Analysis of tool life during turning operation by determining optimal process parameters CJ Rao, D Sreeamulu, Arun Tom Mathew, Procedia Engineering Scopus 1877-7058  
698 2014 SMEC Analyzing the profile modification of truck-trailer to prune the aerodynamic drag and its repercussion on fuel consumption Chaitanya Chilbule, A. Upadhyay, Yagnavalkya Mukkamala, Procedia Engineering Scopus 1877-7058  
699 2014 SMEC Assessment of mechanical properties of AISI 4140 and AISI 316 dissimilar weldments Arivazhagan N, Devendranath Ramkumar K, Kumar SNS, Prashanth MM, William AAS, Reddy MP, Procedia Engineering Scopus 1877-7058  
700 2014 SMEC Assessment of mechanical properties of PCGTA weldments of inconel 625 Devendranath Ramkumar K, Arivazhagan N, Narayanan S, Bhushan M, Korrapati PK Avasarala VK, Procedia Engineering Scopus 1877-7058  
701 2014 SMEC Assessment on the Metallurgical and Mechanical Properties of SA 210 A1 Rifle Tubular Joints S Senthur Prabu, K Devendranath Ramkumar, N Arivazhagan, S Narayanan, Saurabh Garg, Rahul Dayal, Procedia Engineering Scopus 1877-7058  
702 2014 SMEC Azithromycin A potential corrosion inhibitor for aluminum 2024 in acidic medium Lakshmi N V, Karthikeyan S, Arivazhagan N, Journal of Corrosion Science and Engineering Scopus 1466-8858  
703 2014 SMEC CFD analysis of a kerosene fuel tank to reduce liquid sloshing Singal, V., Bajaj, J., Awalgaonkar, N., Tibdewal, S. Procedia Engineering Scopus 1877-7058  
704 2014 SMEC Characterization of metallurgical and mechanical properties of commercially pure copper and AISI 304 dissimilar weldments Chethan Roy, Arivarasu M, Hari P R, Manikandan M, Devendranath Ramkumar K, Arivazhagan N, Procedia Materials Science Scopus 2211-8128  
705 2014 SMEC Characterization of microstructure and mechanical properties of inconel 625 and AISI 304 dissimilar weldments Arivazhagan N, Devendranath Ramkumar K, Narayanan S, Gokul Kumar K, Mithilesh P Varun D, Reddy Gopi Reddy A, ISIJ International WOS 1347-5460 1.14
706 2014 SMEC Characterization of oxide scales to evaluate hot corrosion behavior of ZrO2 and Al2O3-TiO2 plasma sprayed superalloy Arivarasu M, Devendranath Ramkumar K, Arivazhagan N, Manikandan M, Hari P R, Katiki K Yadlapati S Chidepudi S N S, International Journal of ChemTech Research Scopus 2455-9555  
707 2014 SMEC Characterization of weld strength and impact toughness in the multi-pass welding of super-duplex stainless steel UNS 32750 Devendranath Ramkumar K, Arivazhagan N, Thiruvengatam G, Sridhar R, Sudharsan SP Mishra D, Materials and Design WOS 1873-4197 4.525
708 2014 SMEC Combustion and Performance Characteristics of a Small Spark Ignition Engine Fuelled with HCNG C Ramesh Kumar, Ankit Sonthalia, Udit Sharma, Anirudh Punganur, Sohail Abbas, Journal of Engineering Science and Technology Scopus 1823-4690  
709 2014 SMEC Comparative study of composites reinforced with SiC and TiB2 Johny James, kuppan, venkatesan, Ramanujam, Procedia Engineering Scopus 1877-7058  
710 2014 SMEC Comparative study on mechanical and metallurgical properties of AA6061 aluminum alloy sheet weld by pulsed current and dual pulse gas metal arc welding processes Mathivanan A, Devakumaran K, A senthil Kumar, Materials and Manufacturing Processes WOS 1532-2475 2.669
711 2014 SMEC Computational Analysis Of Two Phase Flow Distribution In A Jagan V, Satheesh A, Mohan Babu K, Santhosh kumar D, Applied Mechanics and Materials Scopus 1662-7482  
Horizonatal Pipe
712 2014 SMEC Degumming of Pongamia Pinnata by Acid and Water Degumming Methods Vinayak Kulkarni, Sanchit Jain, Faizan Khatri, Vijayakumar T, International Journal of ChemTech Research Scopus 2455-9555  
713 2014 SMEC Design and analysis of a centrifugal absorber for suppression of helicopter blade vibration Amburay K, Vasudevan R, Po SS, International Journal of Structural Engineering Scopus 1758-7336  
714 2014 SMEC Design and analysis of an automotive vacuum pump Thaslim A A, Kumar S J, Jayachandran A, Damodaran D, Vasudevan R, Applied Mechanics and Materials Scopus 1662-7482  
715 2014 SMEC Design and development of stamping dies for online maintenance Jai Hindus, S. ARPN Journal of Engineering and Applied Sciences Scopus 1819-6608  
716 2014 SMEC Design and development of XY micro-positioning stage using modified topology optimization technique RAMESH T, BHARANIDARAN R, GOPAL V, Applied Mechanics and Materials Scopus 1662-7482  
717 2014 SMEC Design and Simulation of Automotive Seat Height Adjuster Driving Mechanism Based on Multi Body Dynamics Rahul Dilip Nandurkar, Akash Mohanty, P Barath, Applied Mechanics and Materials Scopus 1662-7482  
718 2014 SMEC Design and simulation of bore well rescue robot - advanced Nithin, G., Gowtham, G., Venkatachalam, G., Narayanan, S. ARPN Journal of Engineering and Applied Sciences Scopus 1819-6608  
719 2014 SMEC Design for fatigue and simulation of glass fibre/epoxy composite automobile leaf spring Bhanage, A., Padmanabhan, K. ARPN Journal of Engineering and Applied Sciences Scopus 1819-6608  
720 2014 SMEC Design of fuel tank baffles to reduce kinetic energy produced by fuel sloshing and to enhance the product life cycle Bageerathan T, R Thundil Karuppa Raj, G Edison, ARPN Journal of Engineering and Applied Sciences Scopus 1819-6608  
721 2014 SMEC Design of low Temperature Flashing System Desalination Plant using Brine Solution Heat Load Ramesh Kumar VK, Rajkumar PR, Baskar P, Edison Gundabattini, Research Journal of Recent Sciences Non- Scopus 2277–2502  
722 2014 SMEC Dry sliding wear behaviour of Industrial semi-crystalline and crystalline polymers S Senthur Prabu, Saurabh Garg, Kuldeep Deshmukh, G Manikandan, C Sriram, International Journal of ChemTech Research Scopus 2455-9555  
723 2014 SMEC Effect of heat treatment on mechanical properties and corrosion behaviour on ASTM A36 mild steel Ravikirana, K., Rajasekhar, B., Laxmi Bhavani, P., Pavithra, O., Devi, E.L.P., RajaAnnamalai, A., Siva, T. Journal of Corrosion Science and Engineering Scopus 1466-8858  
724 2014 SMEC Effect of heat treatment, mechanical properties studies and corrosion response on Manganese bronze Neeraja, D., Prasad, B., Raja Annamalai, A., Siva, T. Journal of Corrosion Science and Engineering Scopus 1466-8858  
725 2014 SMEC Effect of laser scan speed on surface temperature cutting force and tool wear during laser assisted machining of Alumina P Kuppan, A senthil kumar, Venkatesh Kannan M, Ramesh Kumar K, John Rozario Jegaraj J, Procedia Engineering Scopus 1877-7058  
726 2014 SMEC Effect of Lubricating Oil on the Performance of Vapour Compression Refrigeration System Kiranmai, John Samuel Koppula, Edison Gundabattini, World Applied Sciences Journal Non- Scopus 1991-6426  
727 2014 SMEC Effect of non-conventional aging treatments on the tensile properties and Quality indices of hipped components made of cast aluminum alloy 354 Dinesh babu G, M Nageswara Rao, Advanced Materials Research Scopus 1662-8985  
728 2014 SMEC Effect of optimal weld parameters in the microstructure and mechanical properties of autogeneous gas tungsten arc weldments of super-duplex stainless steel UNS S32750 Devendranath Ramkumar, K., Mishra, D., Ganesh Raj, B., Vignesh, M.K., Thiruvengatam, G., Sudharshan, S.P., Arivazhagan, N., Sivashanmugam, N., Rabel, A.M. Materials and Design WOS 1873-4197 4.525
729 2014 SMEC Effect of sky scrapers on natural ventilation patterns and human comfort index in low-risebuildings - a CFD analysis over central Mumbai Nagawkar, J., Ghosh, S., Kataria, R., Nashit, A., Deora, A. ARPN Journal of Engineering and Applied Sciences Scopus 1819-6608  
730 2014 SMEC Effect of sodium alginate modification of graphene (by 'anion-π' type of interaction) on the mechanical and thermal properties of polyvinyl alcohol (PVA) nanocomposites Thayumanavan, N., Pankaj Tambe, Girish Joshi, Mukul Shukla Composite Interfaces WOS 1568-5543 1.048
731 2014 SMEC Effect of various pretreatment methods on osmotic dehydration of fruits for qualitative and quantitative advantage Josephine Selvi, N., Baskar, G., Singh, A. International Journal of ChemTech Research Scopus 2455-9555  
732 2014 SMEC Effective Conversion of Kapok Seed Ceiba Pentandra Oil into Biodiesel and Investigation of Effects of Catalyst concentrations and Chromatographic Characterization M A Asokan, R Vijayan, International Journal of ChemTech Research Scopus 2455-9555  
733 2014 SMEC Effective Health care management in India- The role of knowledge management Kartik Balkumar, Resmi Ann Thomas, S P Anbuudayasankar, S Paul Silvian, Gemini V Joy, International Journal of Value Chain Management Scopus 1741-5365  
734 2014 SMEC Electroless copper deposition- An experimental and theoretical approach S Rekha, S Karthikeyan, P A Jeeva, D Kumaran, K N Srinivasan, International Journal of ChemTech Research Scopus 2455-9555  
735 2014 SMEC Enterprise Transformation A Need For Survival And Growth In Vezhavendhan R, Chinmoy Sarkar, Procedia Engineering Scopus 1877-7058  
Small Scale Fabrication Units
736 2014 SMEC Evaluation of properties for Al-SiC reinforced metal matrix composite for brake pads R Abhik, V Umasankar, M Anthony Xavior, Procedia Engineering Scopus 1877-7058  
737 2014 SMEC Examination of the lattice boltzmann method in simulation of manufacturing Perumal D A, R Thundil Karuppa Raj, Agarwal L, Harshan A, K Nanthagopal, ARPN Journal of Engineering and Applied Sciences Scopus 1819-6608  
738 2014 SMEC Executives Perception on the Outcomes of Inhouse and Outdoor Training Programmes Giasuddin Bellary, Venugopal P, Ganesan P, No, No, No, Asian Social Science Non- Scopus 1911-2025  
739 2014 SMEC Experimental and theoretical studies on static and dynamic pressure concentration isotherms of hydride Vinod Kumar Sharma, E Anil Kumar, M Prakash Maiya, S Srinivasa Murthy, International Journal of Hydrogen Energy WOS 1879-3487 4.229
740 2014 SMEC Experimental investigation on static mechanical properties of glass carbon hybrid woven fabric composite laminates Murugan, R., Ramesh, R., Padmanabhan, K., Jeyaraam, R., Krishna, S. Advanced Materials Research Scopus 1662-8985  
741 2014 SMEC Experimental Investigations on the electrochemical machining characteristics of monel 400 alloys and optimization of process parameters Kalaimathi, Venkatachalam, Sivakumar, Jordan Journal of Mechanical and Industrial Engineering Scopus 1995-6665  
742 2014 SMEC Experimental study and computer modelling of the beta to alpha plus beta phase transformation in Ti15 3 alloy under isothermal conditions Naven M, M Nageswara Rao, Santhosh R, Geetha M, Journal of Alloys and Compounds WOS 1873-4669 3.779
743 2014 SMEC Experimental study on dry sliding wear behaviour of sintered Fe C W P M low alloy Steels S Senthur Prabu, Ayush Choudhary, Anshul Jain, Ashu Sharma, Procedia Materials Science Scopus 2211-8128  
744 2014 SMEC Fabrication surface morphology and corrosion investigation of Al 7075-Al2O3matrix composite in sea water and industrial environment N N Yalamoori, V V Shanbhag, S Karthikeyan, R Ramanujam, K Venkatesan, Procedia Engineering Scopus 1877-7058  
745 2014 SMEC Fabrication testing and analysis of braided and short fibre reinforced jute epoxy bio-composite Raman S, Salil kumar C S, sharan chandran, International Journal of ChemTech Research Scopus 2455-9555  
746 2014 SMEC Finite element analysis of jute fibre made hybrid polymer matrix composite Prasad, V., Venkatachalam, G., Rathi, A., Rajakumar, S. Applied Mechanics and Materials Scopus 1662-7482  
747 2014 SMEC Free Vibration Analysis of a Carbon Nanotube Reinforced Composite Beam Naresh B, Vasudevan R, Ananda Babu A, Edwin sudhagar P, Anisa Thaslim A, Applied Mechanics and Materials Scopus 1662-7482  
748 2014 SMEC Free Vibration Analysis of a Width Tapered Laminated Composite Beam Aayush Chandrawanshi, Bhaiyat A Jain, Ananda Babu A, Edwin Sudhagar P, Vasudevan R, Applied Mechanics and Materials Scopus 1662-7482  
749 2014 SMEC Friction stir welded butt joints of AA2024 T3 and AA7075 T6 aluminum alloys Devendranath Ramkumar K, Arivazhagan N, Manikandan M, Narayanan S, Avinash P, Procedia Engineering Scopus 1877-7058  
750 2014 SMEC Hardness and corrosion resistance characteristics of trivalent chromium electrodeposition - an eco friendly process T Mari, S Karthikeyan, P A Jeeva, Wilson H Vincent, G Kannan, Journal of Corrosion Science and Engineering Scopus 1466-8858  
751 2014 SMEC Heat transfer and fluid flow analysis of flat surface with artificially roughened square transverse wire rib for application in solar air heater Thundil Karupaaraj, R., Raja Sekhar, Y., Edison, G., Sai Praneeth, B., Elango, T. ARPN Journal of Engineering and Applied Sciences Scopus 1819-6608  
752 2014 SMEC Hot Corrosion Behavior of Monel 400 and AISI 304 Dissimilar Weldments Exposed in the Molten Salt Environment Containing Na2SO4 + 60% V2O5 at 600 °C N. Arivazhagan, S. Narayanan, Debidutta Mishra, Materials Research WOS 1980-5373  
753 2014 SMEC Hot corrosion studies on welded dissimilar boiler steel in power plant environment under cyclic condition Appala Naidu A, Manikandan M, Kumaresh Babu S P, Arivarasu M, Devendranath Ramkumar K, Arivazhagan N, International Journal of ChemTech Research Scopus 2455-9555  
754 2014 SMEC Hybrid aluminium metal matrix composite reinforced with SiC and TiB2 Kuppan P, Johny James S, Venkatesan K, Ramanujam R, Procedia Engineering Scopus 1877-7058  
755 2014 SMEC Implementation of Genetic Algorithm in Network Modelling of Multi-level Reverse Logistics for Single Product Siva Prasad Darla, B Venkat Likhit, C D Naiju, Polu Vidya Sagar, Research Journal of Applied Sciences Engineering and Technology Scopus 2040-7467  
756 2014 SMEC Implementation of genetic algorithm in network modelling of multi-level reverse logistics for single product Darla, S.P., Naiju, C.D., Likhit, B.V., Sagar, P.V. Research Journal of Applied Sciences, Engineering and Technology Scopus 2040-7467  
757 2014 SMEC Influence of Ageing Processes on the Microstructure, Mechanical Properties and Corrosion Behavior of Aluminum-Silicon Cast Alloys "Al- 6%Si-3%Cu" Swarupa, G., Gopikrishna, N., Ganesh, K., Hemani, S., Siva, T., Raja Annamalai, A. Journal of Corrosion Science and Engineering Scopus 1466-8858  
758 2014 SMEC Influence of cutting parameters on dry machining of inconel 625 alloy with coated carbide insert - a statistical approach Venkatesan K, Ramanujam R, Vimal Saxena, Chawdhury N, Choudhary V, ARPN Journal of Engineering and Applied Sciences Scopus 1819-6608  
759 2014 SMEC Influence of cutting parameters on machinability of inconel 718 alloy with coated carbide insert-a taguchi based fuzzy logic approach TFLA Ramanujam R, Venkatesan K, Vimal Saxena, Chawdhury N, Choudhary V, ARPN Journal of Engineering and Applied Sciences Scopus 1819-6608  
760 2014 SMEC Influence of fiber orientation and thickness on the response of glass epoxy composites subjected to impact loading Rahul Singh Sikarwar, R Velmurugan, N K Gupta, Composites PartB WOS 1359-8368 4.92
761 2014 SMEC Influence of filler metals and welding techniques on the structure-property relationships of Inconel 718 and AISI 316L dissimilar weldments Devendranath Ramkumar K, Arivazhagan N, Choudhury D J, Patel S D Sri Praveen S, Prabaharan P, Xavior MA, Materials and Design WOS 1873-4197 4.525
762 2014 SMEC Influence of post curing on the flexural properties of a rigid polyurethane or polyisocynurate foam-glass/epoxy face sheet sandwich composite Ostwal, R.S., Sawant, A.V., Dumre, A.A., Takalkar, A.R., Ramya, M., Padmanabhan, K. International Journal of ChemTech Research Scopus 2455-9555  
763 2014 SMEC Influence of rate of heating to aging temperature on precipitation hardening in a metastable beta titanium alloy Pande A, M Nageswara Rao, Sainis S, S Rajaraman, Manivasagam G, Advanced Materials Research Scopus 1662-8985  
764 2014 SMEC Influence of Titanium on dry sliding wear behaviour of sintered PM low alloy steel Fe-C-W S Senthur Prabu, S Prathibab, Venkatesan N, Ashu Sharma, Shakkeel Ahmed, Yesh A Shah, Procedia Engineering Scopus 1877-7058  
765 2014 SMEC Influences of tool geometry on metallurgical and mechanical properties of friction stir welded dissimilar AA 2024 and AA 5052 Arivazhagan N, Devendranath Ramkumar K, Narayanan S, Rajkumar V, Venkateshkannan M, Sadeesh P, Procedia Engineering Scopus 1877-7058  
766 2014 SMEC Investigation of emissions and combustion characteristics of a CI engine fueled with waste cooking oil methyl ester and diesel blends Nantha Gopal K, Nanthagopal K, Arindam Pal, Sumit Sharma, Charan Samanchi, Sathyanarayanan K, Alexandria Engineering Journal Scopus 1110-0168  
767 2014 SMEC Investigation of Mechanical Properties of Alumina Nano-particle-Loaded Hybrid GlassB Carbon Fiber Reinforced Epoxy Composites Akash Mohanty, Vijay Kumar Srivastava, Pulya Umamaheswar Sastry, Journal of Applied Polymer sCIENCE WOS  1097-4628 1.9
768 2014 SMEC Investigation of Microstructure and Mechanical Properties of Super Alloy C-276 by Continuous Nd YAG laser Welding Manikandan M, P R Hari, Arivarasu M, Devendranath Ramkumar K, Arivazhagan N, Procedia Materials Science Scopus 2211-8128  
769 2014 SMEC Investigation on Adhesive Wear Behaviour of Industrial Crystalline and Semi Crystalline Polymers against Steel Counterface S Senthur Prabu, S Prathiba, Ashu Sharma, Saurabh Garg, G Manikandan, C Sriram, International Journal of ChemTech Research Scopus 2455-9555  
770 2014 SMEC Investigation on hot corrosion behavior of plasma spray coated nickel based superalloy in aggressive environments at 900 C Prasad K, Arivazhagan N, Manikandan M, Arivarasu M, Devendranath Ramkumar K, Antony K, International Journal of ChemTech Research Scopus 2455-9555  
771 2014 SMEC Investigation on tensile behavior of gongura fibre made hybrid polymer matrix composite Revanthkumar, Viswanath, Venkatachalam, International Journal of Nano and BioMaterials Scopus 1752-8941  
772 2014 SMEC Investigation on the corrosion behavior of the bilayered ceramic coatings deposited using atmospheric plasma spraying S Sathish, M Geetha, CS Swaminathan, C Senthilvel, B Dilip Jerold, Mohd F Shabir, Procedia Technology Scopus 2212-0173  
773 2014 SMEC Investigation on the mechanical properties of SA 210 c tubular joints Senthur Prabu S, Devendranath Ramkumar K, Arivazhagan N, Narayanan S, Gopinath A, Jain A, Procedia Engineering Scopus 1877-7058  
774 2014 SMEC Investigations on dissimilar weldments of inconel 625 and AISI 304 Devendranath Ramkumar K, Arivazhagan N, Narayanan S, Mithilesh P, Varun D Reddy ARG, Procedia Engineering Scopus 1877-7058  
775 2014 SMEC Investigations on dry sliding wear behaviour of Sintered Extruded P M Alloy Steels Fe C W Ti s senthur prabu, s prathiba, M A Asokan, Anshul jain, Neeraj Kumar Jain, Procedia engineering Scopus 1877-7058  
776 2014 SMEC INVESTIGATIONS ON MACHINABILITY AND MACHINING CHARECTERISTICS OF HYBRID POLYMER Revanthkumar J, Rama Kishore Babu G, Thirupathi Reddy M, Venkatachalam G, Jeevanantham AK, Applied Mechanics and Materials Scopus 1662-7482  
777 2014 SMEC Investigations on mechanical and metallurgical properties of dissimilar continuous GTA welds of Monel 400 and C-276 Devendranath Ramkumar K, Arivazhagan N, Narayanan S, Agrawal M, Pandit S Joshi V, Manikandan M, Procedia Engineering Scopus 1877-7058  
778 2014 SMEC Investigations on the lubricated wear of direct metal laser sintered components for functional applications C D Naiju, P M Anil, Mohan Prashanth, S Karthik, ARPN Journal of Engineering and Applied Sciences Scopus 1819-6608  
779 2014 SMEC Investigations on the microstructure and mechanical properties of multi-pass pulsed current gas tungsten arc weldments of Monel 400 and Hastelloy C276 Devendranath Ramkumar K, Arivazhagan, Joshi V, Pandit S Agrawal M, Kumar O S Periwal S, Manikandan, Materials and Design WOS 1873-4197 4.525
780 2014 SMEC Joint Two-Echelon Inventory Model for Optimal Inventory Decisions and Shipment Policies under Non-Linear Price Dependent Demand Burra Karuna Kumar, Dega Nagaraju, S Narayanan, Applied Mathematical Sciences Non- Scopus 1314-7552  
781 2014 SMEC Lattice Boltzmann simulation of flow over a circular cylinder at moderate reynolds numbers Arumuga Perumal, D., Kumar, G.V.S., Dass, A.K. Thermal Science WOS 2334-7163 1.222
782 2014 SMEC Leadership Commitment Culture and Employee Turnover A deeper examination Resmi A T, Gemini VJ, Paul S S, Kannan K, International Journal of Enterprise Network Management Scopus 1748-1260  
783 2014 SMEC Life Cycle Estimation Of An Automotive Seat Recliner With Nerella Srikanth, Jeevanantham AK, Ramalingam M, Applied Mechanics and Materials Scopus 1662-7482  
LCF Approach
784 2014 SMEC Markov based exploration for aircraft design time compression Vasantharaju C, Ashok B, Naiju CD, ARPN Journal of Engineering and Applied Sciences Scopus 1819-6608  
785 2014 SMEC Mechanical characterization of Monel 400 and 316 stainless steel weldments Arivazhagan N, Devendranath Ramkumar K, Narayanan S, Srungavarapu P, Vignesh MK Raj BG, Mishra D, Procedia Engineering Scopus 1877-7058  
786 2014 SMEC Metallurgical and mechanical characterization of electron beam welded super-duplex stainless steel UNS 32750 Devendranath Ramkumar, K., Mishra, D., Vignesh, M.K., Ganesh Raj, B., Arivazhagan, N., Naren, S.V., Suresh Kumar, S. Journal of Manufacturing Processes WOS 1526-6125 2.8
787 2014 SMEC Micro-hardness and Youngs modulus of a thermo mechanically processed biomedical titanium alloy Mohsin Talib Mohammed, Arshad N Siddiquee, Zahid A Khan, M Geetha, Biomaterials and Biomechanics in Bioengineering Scopus 2465-9959  
788 2014 SMEC MODELING OF TWO-ECHELON INVENTORY SYSTEM UNDER EXPONENTIAL PRICE DEPENDENT DEMAND Burra Karuna Kumar, Dega Nagaraju, S Narayanan, K Syam Sundar, ARPN Journal of Engineering and Applied Sciences Scopus 1819-6608  
789 2014 SMEC Modelling and electro-hygrothermo-mechanical reliability analyses of leadless dual IC packages Balaguru, K., Padmanabhan, K., Subeesh, S. International Journal of Computer Aided Engineering and Technology Scopus 1757-2665  
790 2014 SMEC Multi-Objective Optimization of Process Parameters for Electrochemical Machining of 6061Al 10Wt Al2O3 5 Wt SiC Composite using Hybrid Fuzzy Artificial Bee Colony Algorithm Ayyappan, Kalaimathi, Venkatachalam, Jordan Journal of Mechanical and Industrial Engineering Scopus 1995-6665  
791 2014 SMEC Multi-response optimization using anova and desirability function analysis A case study in end milling of inconel alloy Ramanujam, venkatesan, Mithun Vasan, Lohithaksha M Maiyar, ARPN Journal of Engineering and Applied Sciences Scopus 1819-6608  
792 2014 SMEC Numerical analysis of helically coiled heat exchanger using CFD technique Manoj Kumar S, R Thundil Karuppa Raj, Aby Mathew C, Elango T, ARPN Journal of Engineering and Applied Sciences Scopus 1819-6608  
793 2014 SMEC Numerical investigation of fluid flow and heat transfer characteristics on the aerodynamics of ventilated disc brake rotor using CFD Ramachandran R, R Thundil Karuppa Raj, James M, Gatlewar S C, Thermal Science WOS 2334-7163 1.222
794 2014 SMEC Numerical simulation of mixed-convection in a lid-driven porous cavity using different nanofluids Nitesh Mittal, Satheesh A, D Santhosh kumar, Heat Transfer Asian Research WOS 1523-1496  
795 2014 SMEC On the sustainability of the ancient ratnagiri university complex: A design reconstruction study Ghosh, S., Mathew, R., Gupta, P., Khanna, A., Saha, S. ARPN Journal of Engineering and Applied Sciences Scopus 1819-6608  
796 2014 SMEC Optimal distribution of discrete heat sources under mixed convection heat transfer Tapano Kumar Hotta, S P Venkateshan, C Balaji, ASME Journal of Heat Transfer WOS 1528-8943 1.602
797 2014 SMEC Optimal siting considerations for proposed and extant wind farms in india Vachaparambil, K.J., Philips, E.A., Issar, K., Parab, V., Bahadur, D., Gosh, S. Energy Procedia Scopus 1876-6102  
798 2014 SMEC Optimality of Cycle Time and Inventory Decisions in a Two Echelon Inventory System under Credit Period Seelam Krugon, Dega Nagaraju, S Narayanan, Procedia Engineering Scopus 1877-7058  
799 2014 SMEC Optimality of Inventory Decisions and Shipment Policies in a Two-Echelon Inventory System under Quadratic Price Dependent Demand Burra Karuna Kumar, Dega Nagaraju, S Narayanan, Procedia Engineering Scopus 1877-7058  
800 2014 SMEC Optimization of Inter Cellular Movement of Parts in Cellular Manufacturing System Using Genetic Algorithm Siva Prasad Darla, Polu Vidya Sagar, C D Naiju, B Venkat Likhit, Research Journal of Applied Sciences Engineering and Technology Scopus 2040-7467  
801 2014 SMEC Optimization of machining parameters using fuzzy based principal component analysis during dry turning operation of inconel 625 - A hybrid approach Ramanujam R, Venkatesan K, Vimal Saxena, Pandey R, Harsha T, Procedia Engineering Scopus 1877-7058  
802 2014 SMEC Performance Analysis of Single Module Thermoelectric Generator Somesh Reddy T, Ankit Sonthalia, C Ramesh Kumar, Advanced Materials Research Scopus 1662-8985  
803 2014 SMEC Performance of plasma spray coatings on Inconel 625 in Air oxidation and molten salt environment at 800 c Katiki K, Arivazhagan N, Arivarasu M, Manikandan M, Devendranath Ramkumar K, International Journal of ChemTech Research Scopus 2455-9555  
804 2014 SMEC Polymer ceramic composite for bone regeneration application Basu Poulami, I Manjubala, B S Sharan, U Narendra Kumar, International Journal of ChemTech Research Scopus 2455-9555  
805 2014 SMEC Processing and mechanical characterization of self reinforced polymer composite systems Sharan Chandran M, Padmanabhan K, Maxime, Constantaine, International Journal of ChemTech Research Scopus 2455-9555  
806 2014 SMEC Product visualization, realization and reliability of non-hermetically encapsulated integrated circuit packages Krishnan, P. ARPN Journal of Engineering and Applied Sciences Scopus 1819-6608  
807 2014 SMEC Re-designing door handles to reduce aerodynamic drag in road vehicles Gautham Ramchadran, Archana Nepak, Yagnavalkya Mukkamala, 32ns AIAA Applied Aerodynamics Conference      
808 2014 SMEC Shock Wave Boundary Layer interactions in hypersonic flows Bibin John, V Kulkarni, G Natarajan, International Journal of Heat Mass transfer WOS 0017-9310 3.891
809 2014 SMEC Smart Cyclone Alert in the Indian Subcontinent Sat Ghosh, Sandeep Subramanian et al, Atmospheric Science Letters WOS 1530-261X 1.198
810 2014 SMEC Some clarifications on the use of Mahalanobis distance for the machine-part cell formation problem N Srinivasa Gupta, D Devika, Vaibhav, International Journal of Advanced Manufacturing Technology WOS 1433-3015 2.601
811 2014 SMEC Stochastic creep damage estimation in pipings with spatial non-Gaussian uncertainties using spectral stochastic finite element method Y Appalanaidu, Sayan Gupta, Yash Vyas, Procedia Engineering Scopus 1877-7058  
812 2014 SMEC Strain hardening behaviour of hipped and non-hipped castings of aluminium alloy 354 subjected to two-step ageing treatments Gupta A, M Nageswara Rao, Eswar A, Babu GD, Advanced Materials Research Scopus 1662-8985  
813 2014 SMEC Studies on effect of tool design and welding parameters on the friction stir welding of dissimilar aluminium alloys AA 5052 - AA 6061 Arivazhagan N, Devendranath Ramkumar K, VenkateshKannan M, RajKumar V, Sadeesh P, Procedia Engineering Scopus 1877-7058  
814 2014 SMEC Studies on flexural optimization of glass fabric-epoxy skin/rigid foam core sandwich composites Suresh, E., Hemnath, T., Padmanabhan, K. International Journal of ChemTech Research Scopus 2455-9555  
815 2014 SMEC Study of Cutting force and Surface Roughness in machining of Al alloy Hybrid Composite and Optimized using Response Surface Methodology Venkatesan K, Ramanujam R, Joel J, Jeyapandiarajan P, Vignesh M, Procedia Engineering Scopus 1877-7058  
816 2014 SMEC Study of fluid flow around impeller blades in rushton turbine in a baffled vessel using computational fluid dynamics Singh A D, R Thundil Karuppa Raj, Tare S, Varma S, ARPN Journal of Engineering and Applied Sciences Scopus 1819-6608  
817 2014 SMEC Study of Ground Water Contamination at Tamil Nadu Chromate Chemicals Limited Plant and Its Surrounding Area in SIPCOT Industrial Complex in Ranipet in Vellore District India Venkatesan N, Asokan M A, S Senthur prabu, Giriaj M, Vanitha D, International Journal of ChemTech Research Scopus 2455-9555  
818 2014 SMEC Surface modification of Ti 13Nb 13Zr and Ti 6Al 4V using electrophoretic deposition EPD for enhanced cellular interaction S Bhawanjali, M Geetha, A Revathi, K C Popat, Materials Technology WOS 1753-5557 1.232
819 2014 SMEC Synthesis and characterization of forsterite refractory by doping with kaolin Bhargavi Rani, A., Raja Annamalai, A.R., Majhi, M.R., Harish Kumar, A. International Journal of ChemTech Research Scopus 2455-9555  
820 2014 SMEC The characterization and behavior of Al2014 reinforced with Al2O3 fabricated by powder metallurgy Gaharwar, V.S., Umashankar, V. International Journal of ChemTech Research Scopus 2455-9555  
821 2014 SMEC The influence of rigid foam density on the flexural properties of glass fabric/epoxy-polyurethane foam sandwich composites Uday, C., Teja Varma, C.S., Kaushik Varma, B.N.S., Ramya, M., Padmanabhan, K. International Journal of ChemTech Research Scopus 2455-9555  
822 2014 SMEC The link between salary and psychiatric problems among the industrial workers Syed Khalid Perwez, Ramaseshan H, Mohammad Manzoor, Swamy TNV, Asian Social Science Non- Scopus 1911-2025  
823 2014 SMEC The use of artificial neural network for the prediction of wear loss of aluminium-magnesium alloys T Hariprasad, D Shivalingappa, A Nagaraj, Geetha Manivasagam, International Journal of Computer Aided Engineering and Technology Scopus 1757-2665  
824 2014 SMEC Thermodynamic performance evaluation of an AIR-AIR heat pipe heat exchanger Mandapati, M.J.K., Subhash Chandra, K., Sat Narayan, G. Thermal Science WOS 2334-7163 1.222
825 2014 SMEC Use of strain energy density W and Qo as quality indices to study the effect of hipping on cast aluminium alloy 354 under different aging conditions Babu GD, M Nageswara Rao, Sibal P, Advanced Materials Research Scopus 1662-8985  
826 2014 SMEC Wear studies on plasma sprayed Al 2 O 3 40wt percentage 8YSZ composite ceramic coating on Ti 6Al 4V alloy used for biomedical applications G Perumal, N Alagumurthi, M Geetha, R Asokamani, wear WOS 1873-2577 2.96
827 2014 SMEC Weibull analysis of the effect of interrupted aging treatments on the fatigue life of components made of cast Aluminium alloy 354 Sainis S, M Nageswara Rao, Kalra A, Babu GD, Advanced Materials Research Scopus 1662-8985  

Faculty Publications

Sl No Month Calendar Year School/ Centre Dept Emp. ID Faculty Name Name of the author/s Title of paper Name of journal Indexed In
Scopus / WOS/Pub Med / ICI / Non Scopus
ISSN number Impact factor
1 January 2022 ARC DAE 14463
12869
Dr. THANGARAJA J
Dr. PORAPATHAM E
Jeyaseelan T., Ekambaram P., Subramanian J., Shamim T. A comprehensive review on the current trends, challenges and future prospects for sustainable mobility Renewable and Sustainable Energy Reviews WOS 1364-0321 14.98
2 January 2022 SMEC DAE 16351
16352
Dr. DSILVA WINFRED RUFUSS D
Dr. ARULVEL S
Dsilva Winfred Rufuss D., Arulvel S., Anil Kumar V., Davies P.A., Arunkumar T., Sathyamurthy R., Kabeel A.E., Anand Vishwanath M., Sai Charan Reddy D., Dutta A., Agrawal M., Vilas Hiwarkar V. Combined effects of composite thermal energy storage and magnetic field to enhance productivity in solar desalination Renewable Energy WOS 0960-1481 8.001
3 January 2022 SMEC DTEE 15272 Dr. SABOOR S Shaik S., Maduru V.R., Kontoleon K.J., Arıcı M., Gorantla K., Afzal A. Building glass retrofitting strategies in hot and dry climates: Cost savings on cooling, diurnal lighting, color rendering, and payback timeframes Energy WOS 0360-5442 7.147
4 January 2022 SMEC DAE 14463 Dr. THANGARAJA J Rajkumar S., Das A., Thangaraja J. Integration of artificial neural network, multi-objective genetic algorithm and phenomenological combustion modelling for effective operation of biodiesel blends in an automotive engine Energy WOS 0360-5443 7.147
5 January 2022 SMEC DAE 13339
10783
Dr. ASHOK B
Dr. NANTHA GOPAL K
Shenbagamuthuraman V., Patel A., Khanna S., Banerjee E., Parekh S., Karthick C., Ashok B., Velvizhi G., Nanthagopal K., Ong H.C. State of art of valorising of diverse potential feedstocks for the production of alcohols and ethers: Current changes and perspectives Chemosphere WOS 0045-6535 7.086
6 January 2022 SMEC DDA 14833 Dr. RAJESH M Dhilipkumar T., Rajesh M. Multi-scale strengthening of co-cure joints through multiwall carbon nanotube modified adhesive and GFRP pins Composites Communications WOS 2452-2139 6.617
7 January 2022 SMEC DTEE 14810 Dr. PRAKASH R Sathish Sharma G., Sugavaneswaran M., Prakash R. Design and validation of additive manufactured catalytic converter for the control of regulated and unregulated emissions of a gasohol fuelled spark ignition engine Fuel WOS 0016-2361 6.609
8 January 2022 SMEC DTEE 16356 Dr. NISHANT TIWARI Bhuva V.J., Jani J.P., Patel A., Tiwari N. Effect of bubble coalescence on two- phase flow boiling heat transfer in raccoon microchannel - A numerical study International Journal of Heat and Mass Transfer WOS 0017-9310 5.584
9 January 2022 SMEC DAE 13339 Dr. ASHOK B Azhaganathan G., Bragadeshwaran A. Critical review on recent progress of ethanol fuelled flex-fuel engine characteristics International Journal of Energy Research WOS 1099-114X 5.164
10 January 2022 CIMR DME 15274
15245
13954
Dr. CHINMAYA PRASAD MOHANTY
Dr. SITARAM DASH
Dr. RAJA ANNAMALAI A
Shastri R.K., Mohanty C.P., Dash S., Gopal K.M.P., Annamalai A.R., Jen C.-P. Reviewing Performance Measures of the Die-Sinking Electrical Discharge Machining Process: Challenges and Future Scopes Nanomaterials WOS 2079-4991 5.076
11 January 2022 SMEC DME 16099 Dr. SUDHAKARA PANDIAN R Radhakrishnan Govindan G., Sattanathan M., Muthiah M., Ranjitharamasamy S.P., Athikesavan M.M. Performance analysis of a novel thermal energy storage integrated solar dryer for drying of coconuts Environmental Science and Pollution Research WOS 0944-1344 4.223
12 January 2022 SMEC DTM 15938 Dr. REMYA L Lathabhavan R., Sudevan S. The Impacts of Psychological Distress on Life Satisfaction and Wellbeing of the Indian General Population During the First and Second Waves of COVID- 19: A Comparative Study International Journal of Mental Health and Addiction WOS 1557-1874 3.836
13 January 2022 CIMR DME 13954 Dr. RAJA ANNAMALAI A Somasundaram M., Narendrakumar U., Raja Annamalai A. Effect of heat treatment on fatigue behaviour of stir-cast EV31A magnesium alloy Materials Letters WOS 0167-577X 3.423
14 January 2022 SMEC DAE 14488 Dr. PREMKARTIKKUMAR SR Kautkar N.U., Premkartikkumar S.R. An impact of emulsified cottonseed biodiesel with Nano additives on low heat rejection engine Environment, Development and Sustainability WOS 1387-585X 3.219
15 January 2022 CO2 DTEE 13605 Dr. RANJITHA J Senthilkumar N., Raj P., Ranjitha J., Muniappan A. A critical evaluation of additive blended cashew nut shell liquid blended biodiesel performance in compression ignition engine Environment, Development and Sustainability WOS 1387-585X 3.219
16 January 2022 SMEC DAE 13339 Dr. ASHOK B Jacob A., Ashok B., Ong H.C., Le P.T.K. Scaling-up heterotrophic cultures of
C. Pyrenoidosa microalgae for sustainable synthesis of low-density biodiesel mixtures and predict CI engine behavior at optimal proportions
Environment, Development and Sustainability WOS 1387-585X 3.219
17 January 2022 SMEC DDA 14833 Dr. RAJESH M Dhilipkumar T., Rajesh M. Effect of manufacturing processes and multi-walled carbon nanotube loading on mechanical and dynamic properties of glass fiber reinforced composites Polymer Composites WOS 1548-0569 3.171
18 January 2022 SMEC DDA 14833 Dr. RAJESH M Dhilipkumar T., Rajesh M. Influence of manufacturing process and GFRP pin loading on shear and dynamic behaviour of composite joints Journal of Adhesion WOS 1545-5823 2.917
19 January 2022 CIMR DME 13954 Dr. RAJA ANNAMALAI A Evangeline T.G., Annamalai A.R. Influence of heating modes on the microstructural and dielectric properties of calcium copper titanium oxide (CaCu3Ti4O12/CCTO) using conventional and microwave sintering Journal of Materials Science: Materials in Electronics WOS 0957-4522 2.478
20 January 2022 CO2 DAE 10063 Dr. SENTHIL KUMAR A  Verma S.K., Gupta V., Mukherjee S.S., Gangradey R., Srinivasan R., Arumugam S.K., Ravi Kumar P.S. Numerical prediction of the operating point for the cryogenic twin-screw hydrogen extruder system Cryogenics WOS 0011-2275 2.226
21 January 2022 SMEC DME 16167 Dr. DEVASRI FULORIA Raut P., Fuloria D., Baka S., Chatterjee S., Ghosh C., Venkatramani N., Samajdar I. Electropulsing-induced plastic deformation in an interstitial free steel Materials Science and Technology (United Kingdom) WOS 0267-0836 1.92
22 January 2022 SMEC DTEE 16343 Dr. ABINASH MOHANTA Mohanta A., Pradhan A., Patra K.C. Determination of Discharge Distribution in Meandering Compound Channels Using Machine Learning Techniques Journal of Irrigation and Drainage Engineering WOS 1943-4774 1.879
23 January 2022 SMEC DDA 16352 Dr. ARULVEL S Khan M.W., Elayaperumal A., Prabhu M.S., Arulvel S. Effect of Compaction Pressure on the Physical, Mechanical, and Tribological Behavior of Compacted Crab Shell Particles Prepared Using Uniaxial Compaction Route Journal of Materials Engineering and Performance WOS 1059-9495 1.819
24 January 2022 SMEC DME 15757 Dr. SENTHIL KUMARAN S Selvaraj S.K., Raj A., Rishikesh Mahadevan R., Chadha U., Paramasivam V. A Review on Machine Learning Models in Injection Molding Machines Advances in Materials Science and Engineering WOS 1687-8434 1.726
25 January 2022 SMEC DME 11234 Dr. ARIVAZHAGAN N Sandeep R., Natarajan A. Advances in joining technologies for the innovation of 21st century lightweight aluminium-CFRP hybrid structures Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering WOS 0954-4089 1.62
26 January 2022 SMEC DME 16160 Dr. MD FASEEULLA KHAN Mishra S., Khan F., Panigrahi S.K. A crystal plasticity based approach to establish role of grain size and crystallographic texture in the Tension–Compression yield asymmetry and strain hardening behavior of a Magnesium–Silver–Rare Earth alloy Journal of Magnesium and Alloys WOS 2213-9567 10.088
27 January 2022 SMEC DAE DDA 16351
14461
16352
Dr. DSILVA WINFRED RUFUSS D
Dr. MALLIKARJUNA REDDY D
Dr. ARULVEL S
Arulvel S., Mallikarjuna Reddy D., Dsilva Winfred Rufuss D., Akinaga T. A comprehensive review on mechanical and surface characteristics of composites reinforced with coated fibres Surfaces and Interfaces WOS 2468-0230 4.837
28 January 2022 SMEC DME 15757 Dr. SENTHIL KUMARAN S Selvaraj S.K., Raj A., Dharnidharka M., Chadha U., Sachdeva I., Kapruan C., Paramasivam V. A Cutting-Edge Survey of Tribological Behavior Evaluation Using Artificial and Computational Intelligence Models Advances in Materials Science and Engineering WOS 1687-8434 1.726
29 January 2022 SMEC DME 15757
12941
Dr. SENTHIL KUMARAN S
Dr. SUNDARAMALI G
Selvaraj S.K., Sundaramali G., Jithin Dev S., Srii Swathish R., Karthikeyan R., Vijay Vishaal K.E., Paramasivam V. Recent Advancements in the Field of Ni-Based Superalloys Advances in Materials Science and Engineering WOS 1687-8435 1.726
30 January 2022 ARC DAE 10693 Dr. RAMESH KUMAR C Jose S.S., Chidambaram R.K. Thermal Comfort Optimization in an Electric Vehicle International Journal of Heat and Technology SCOPUS 0392-8764 -
31 January 2022 SMEC DAE 14475 Dr. KANNAN C Kulkarni A., Mahale R., Kannan C. Wear Based Lifetime Estimation of a Clutch Facing using Coupled Field Analysis International Journal of Automotive and Mechanical Engineering SCOPUS 2229-8649 -
32 January 2022 SMEC DME 14807 Dr. SAMPATH KUMAR T Tamiloli N., Venkatesan J., Kumar T.S. OPTIMIZATION OF MATERIAL REMOVAL RETE OF AA6086T6 USING TAGUCHI BASED REGRESSION MODEL Academic Journal of Manufacturing Engineering SCOPUS  2620-2832 -
33 January 2022 SMEC DDA 11551 Dr. VELU M Saju T., Velu M. Finite Element and Experimental Analysis of Residual Stresses in Electron Beam Welded Nickel-Based Superalloys European Journal of Computational Mechanics SCOPUS 2642-2085 -
34 January 2022 SMEC DDA 12356 Dr. RAJKUMAR E Warghane R.S., Pillai R.E. Design optimisation and development of thresher machine using artificial intelligence and machine learning International Journal of Engineering Systems Modelling and Simulation SCOPUS 1755-9758 -
35 February 2022 SMEC DAE 13339 Dr. ASHOK B Ashok B., Usman K.M., Vignesh R., Umar U.A. Model-based injector control map development to improve CRDi engine performance and emissions for eucalyptus biofuel Energy WOS 0360-5442 7.147
36 February 2022 CBCMT DME 10597 Dr. GEETHA MANIVASAGAM Vishnu J., Ansheed A.R., Hameed P., Praveenkumar K., Pilz S., Andrea Alberta L., Swaroop S., Calin M., Gebert A., Manivasagam G. Insights into the surface and biocompatibility aspects of laser shock peened Ti-22Nb alloy for orthopedic implant applications Applied Surface Science WOS 0169-4332 6.707
37 February 2022 CBCMT DME 10597 Dr. GEETHA MANIVASAGAM Whenish R., Ramakrishna S., Jaiswal A.K., Manivasagam G. A framework for the sustainability implications of 3D bioprinting
through nature-inspired materials and structures
Bio-Design and Manufacturing WOS 2096-5524 6.302
38 February 2022 SMEC DME 14802 Dr. JAYAKRISHNA K Kandasamy J., Kinare Y.P., Pawar M.T., Majumdar A., K.E.K. V., Agrawal R. Circular economy adoption challenges in medical waste management for sustainable development: An empirical study Sustainable Development WOS 1099-1719 6.159
39 February 2022 SMEC DTEE 14785 Dr. VINOD KUMAR SHARMA Chaurasiya P.K., Rajak U., Singh S.K., Nath Verma T., Sharma V.K., Kumar A., Shende V. A review of techniques for increasing the productivity of passive solar stills Sustainable Energy Technologies and Assessments WOS 2213-1388 5.353
40 February 2022 SMEC DME DDA 15757
14781
 Dr. SENTHIL KUMARAN S
Dr. MANIKANDAN  M 
Selvaraj S.K., Prasad S.K., Yasin S.Y.,
Subhash U.S., Verma P.S., Manikandan M., Dev S.J.
Additive manufacturing of dental material parts via laser melting deposition: A review, technical issues, and future research directions Journal of Manufacturing Processes WOS 1526-6125 5.01
41 February 2022 ARC DAE 14463 Dr. THANGARAJA J Vaidya G., Nalla B.T., Sharma D.K., Thangaraja J., Devarajan Y., Sorakka Ponnappan V. Production of biodiesel from phoenix sylvestris oil: Process optimisation technique Sustainable Chemistry and Pharmacy WOS 2352-5541 4.508
42 February 2022 SMEC DTEE 16356 Dr. NISHANT TIWARI Doshi S., Kashyap G., Tiwari N. Thermo-hydraulic and entropy generation investigation of nano-encapsulated phase change material (NEPCM) slurry in hybrid wavy microchannel International Journal of Numerical  Methods for Heat and Fluid Flow WOS 0961-5539 4.17
43 February 2022 SMEC DME 16099 Dr. SUDHAKARA PANDIAN R Senthil C., Pandian R.S. Proactive Maintenance Model Using Reinforcement Learning Algorithm in Rubber Industry Processes WOS 2227-9717 2.847
44 February 2022 SMEC DTEE 11168 Dr. SATYAJIT GHOSH Gumber S., Ghosh S. An experimental and modelling analysis of cloud droplet growth from vehicular emissions with non-ideal microphysics over an Asian mega-city Atmospheric Science Letters WOS 1530-261X 2.415
45 February 2022 SMEC DME DTEE 15757
12941
11899
Dr. SENTHIL KUMARAN S
Dr. SUNDARAMALI G
Dr.NATARAJAN M
Karthikeyan B., Selvaraj S.K., Dhinakaran G., Sundaramali G., Muthuswamy N., Paramasivam V. A Comparative Analysis by Experimental Investigations on Normal and Ground Ultrafine Mineral Admixtures in Arresting Permeation in High-Strength Concrete Advances in Civil Engineering WOS 1687-8086 1.924
46 February 2022 SMEC DME 15744 Dr. RAJAMURUGAN G ShivaKumar G.N., Rajamurugan G. Friction stir welding of dissimilar alloy combinations—A Review Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science WOS 0954-4062 1.762
47 February 2022 SMEC DME 15757 Dr. SENTHIL KUMARAN S     Chadha U., Selvaraj S.K., Pant H., Arora A., Shukla D., Sancheti I., Chadha A., Srivastava D., Khanna M., Ram Kishore S., Paramasivam V. Phase Change Materials in Metal Casting Processes: A Critical Review and Future Possibilities Advances in Materials Science and Engineering WOS 1687-8434 1.726
48 February 2022 SMEC DDA DME 14781
15757
11234
Dr. MANIKANDAN M
Dr. SENTHIL KUMARAN S
Dr. ARIVAZHAGAN N
Subramani P., Sathishkumar M., Manikandan M., Selvaraj S.K., Sreenivasulu V., Arivazhagan N., Rajkumar S. Performance of air plasma sprayed Cr3C2-25NiCr and NiCrMoNb coated X8CrNiMoVNb16-13 alloy subjected to high temperature corrosion environment Materials Research Express WOS  2053-1591 1.62
49 February 2022 SMEC DME DTEE 14800 15274 Dr. TAPANO KUMAR HOTTA
Dr. CHINMAYA PRASAD MOHANTY
Aneesh T., Pawan K., Mohan L., Hari Krishna P., Hotta T.K., Mohanty C.P., Gupta M. Exploring Casting Defects of AA7075 Alloy in the Gravity Die Casting Simulation of an IC Engine Block Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering WOS  0954-4089 1.62
50 February 2022 SMEC DME DDA 15757 11149 Dr. SENTHIL KUMARAN S
Dr. MANOHARAN R
Chadha U., Selvaraj S.K., Vishak Thanu S., Cholapadath V., Abraham A.M., Zaiyan M M., Manoharan M., Paramsivam V. A review of the function of using carbon nanomaterials in membrane filtration for contaminant removal from wastewater Materials Research Express WOS 2053-1591 1.62
51 February 2022 SMEC DTEE 12246 Dr. EDISON GUNDABATTINI  Kumar G.N., Gundabattini E. Irreversibility analysis of various components in a supercritical thermal power plant International Journal of Exergy WOS 1742-8297 1.383
52 February 2022 SMEC DAE 16351 Dr. DSILVA WINFRED RUFUSS D Nagaraja S., Dsilva Winfred Rufuss D. Performance optimization of preheated palm oil-diesel blends using integrated response surface methodology and analysis of variance Biocatalysis and Agricultural Biotechnology SCOPUS 1878-8181 -
53 February 2022 SMEC DME 14802 Dr. JAYAKRISHNA K K.E.K V., Nadeem S.P., Meledathu Sunil S., Suresh G., Sanjeev N., Kandasamy J. Modelling the strategies for improving maturity and resilience in medical oxygen supply chain through digital technologies Journal of Global Operations and Strategic Sourcing SCOPUS 2398-5364 -
54 February 2022 SMEC DME 13140 Dr. DEGA NAGARAJU Kiran B., Nagaraju D. Simulation and experimental study on effect of surface residual stresses in dry orthogonal micro turning sample Australian Journal of Mechanical Engineering SCOPUS 1448-4846 -
55 February 2022 SMEC DTEE 16371 Dr. BALAJI K Sathish S., Vijay Samuel G., Balaji K., John Presin Kumar A. Experimental investigation of methane gas generation using textile effluents International Journal of Ambient Energy SCOPUS 2162-8246 -
56 February 2022 SMEC DME 15792 Dr. AHANKARI SANDEEP SURESHRAO Ahankari S., Lasrado D., Subramaniam R. Advances in materials and fabrication of separators in supercapacitors Materials Advances SCOPUS 2633-5409 -
57 February 2022 ARC DAE 14465 Dr. MOHAMED IBRAHIM M Rajagopal S., Pulapparambil Vallikkattil R., Mohamed Ibrahim M., Velev D.G. Electrode Materials for Supercapacitors in Hybrid Electric Vehicles: Challenges and Current Progress Condensed Matter SCOPUS 2410-3896 -
58 February 2022 SMEC DME 15757 Dr. SENTHIL KUMARAN S Chadha U., Abrol A., Vora N.P., Tiwari A., Shanker S.K., Selvaraj S.K. Performance evaluation of 3D printing technologies: a review, recent advances, current challenges, and future directions Progress in Additive Manufacturing SCOPUS 2363-9512 -
59 March 2022 SMEC DAE 13339 Dr. ASHOK B Jacob A., Ashok B., Usman K.M., Kulla D.M. Influence of post-injection parameters on the performance of continuous regeneration trap to mitigate greenhouse gas and particulate emissions from CI engine Energy WOS 0360-5442 7.147
60 March 2022 SMEC DDA 17070 Dr. CHINMAYA SAHU Muni M.K., Parhi D.R., Kumar P.B., Sahu C., Kumar S. Towards motion planning of humanoids using a fuzzy embedded neural network approach Applied Soft Computing WOS 1568-4946 6.725
61 March 2022 SMEC DAE 13339 Dr. ASHOK B Vignesh R., Ashok B. Enhancement of biofuel engine characteristics through cyclic variation and multi-variate effect of split injection parameters Fuel WOS 0016-2361 6.609
62 March 2022 SMEC DTEE 17043 Dr. DEEPAKKUMAR R Ramalingam S., Babu D., Santhoshkumar A., Deepakkumar R., Ravikanth D. Impact of exhaust gas recirculation and split injection strategy combustion behavior on premixed charge compression ignition engine fuelled with moringa oleifera methyl ester Fuel WOS 0016-2361 6.609
63 March 2022 SMEC DAE 16347
12869
Dr. NATARAJ G
Dr. PORPATHAM E
Ganesan N., Viswanathan K., Karthic S.V., Ekambaram P., Wu W., Vo D.-V.N. Split injection strategies based RCCI combustion analysis with waste cooking oil biofuel and methanol in an open ECU assisted CRDI engine Fuel WOS 0016-2361 6.609
64 March 2022 SMEC DAE 13339 Dr. ASHOK B Jacob A., Ashok B., Usman K.M. Production of Chlorella pyrenoidosa biodiesel by heterotrophic pathway to improve CI engine output characteristics using statistical approaches Process Safety and Environmental Protection WOS 0957-5820 6.158
65 March 2022 SMEC DME 10223
13612
13331
Dr. ANTHONY XAVIOR M
Dr. JEYAPANDIARAJAN P
Dr. JOEL J
Ashwath P., Xavior M.A., Batako A., Jeyapandiarajan P., Joel J. Selective laser melting of Al–Si–10Mg alloy: microstructural studies and mechanical properties assessment Journal of Materials Research and Technology WOS 2238-7854 5.039
66 March 2022 SMEC DME 14802 Dr. JAYAKRISHNA K Vimal K.E.K., Churi K., Kandasamy J. Analysing the drivers for adoption of Industry 4.0 technologies in a functional paper – cement – sugar circular sharing network Sustainable Production and Consumption WOS 2352-5509 5.032
67 March 2022 SMEC DAE 16347
15287
12869
Dr. NATARAJ G
Dr. BIBHUTI BHUSAN SAHOO
Dr. PORPATHAM E
Ganesan N., Sahoo B.B., Ekambaram P., Elumalai P.V., Samuel O.D., Enweremadu C.C., Afzal A., Saleel C.A. Experimental based comparative exergy analysis of a spark-ignition Honda GX270 Genset engine fueled with LPG and syngas Energy Science and Engineering WOS 2050-0505 4.170
68 March 2022 SMEC DTEE 14417 Dr. DEVENDRA KUMAR PATEL Vineeth V.K., Patel D.K. Influence of aspect ratio on the wake dynamics of a pitching wing Physics of Fluids WOS 1070-6631 3.521
69 March 2022 SMEC DTEE 14563 Dr. KAMATCHI R Nandhakumar E., Selvakumar P., Sasikumar A., Prem kumar M., Vivek E., Kamatchi R. Facile eco-friendly synthesis of rare- earth cobaltite-based perovskite nanostructures as electrocatalysts for oxygen evolution reaction Materials Letters WOS 0167-577X 3.423
70 March 2022 CBCMT DME 10597
14868
Dr. GEETHA MANIVASAGAM
Dr. NAGESWARA RAO M
Vishnu J., Manivasagam G., Rao N., Rack H.J. Fatigue and corrosion resistance of low modulus Ti-35Nb-7Zr-5Ta-0.35O beta Ti alloy for orthopedic implant applications Materials Today Communications WOS 2352-4928 3.383
71 March 2022 SMEC DDA 16346 Dr. GUNJI BALA MURALI Dara A., Bahubalendruni M.A.R., Johnney Mertens A., Balamurali G. Numerical and experimental investigations of novel nature inspired open lattice cellular structures for enhanced stiffness and specific energy absorption Materials Today Communications WOS 2352-4928 3.383
72 March 2022 SMEC DTEE 15272 Dr. SABOOR S Cuce E., Cuce P.M., Saboor S., Ghosh A., Sheikhnejad Y. Floating PVs in Terms of Power Generation, Environmental Aspects, Market Potential, and Challenges Sustainability (Switzerland) WOS 2071-1050 3.251
73 March 2022 SMEC DDA 14828 Dr. EDWIN SUDHAGAR P Gunasegeran M., Sudhagar P. E. Experimental and numerical study of transverse shear modulus for bioinspired glass fiber-reinforced polymer sandwich core Polymer Composites WOS 0272-8397 3.171
74 March 2022 SMEC DDA 12507 Dr. AKASH MOHANTY Kesavulu A., Mohanty A. Investigation of physical, flexural, and dynamic mechanical properties of alumina and graphene nanoplatelets filled epoxy nanocomposites Polymer Composites WOS 0272-8397 3.171
75 March 2022 SMEC DME 15288 Dr. SREEKANTH M S Kshatriya A.S., Tiwari P., Sreekanth M., Yunus Khan T.M., Khadar S.D.A., Mansour M., Feroskhan M. Investigations into the Combined Effect of Mahua Biodiesel Blends and Biogas in a Dual Fuel Engine Energies WOS 1996-1073 3.004
76 March 2022 SMEC DTEE 11168 Dr. SATYAJIT GHOSH Gumber S., Ghosh S. Quick Predictions of Onset Times and Rain Amounts from Monsoon Showers over Urban Built Environments Atmosphere WOS 2073-4433 2.686
77 March 2022 SMEC DDA 14461 Dr. MALLIKARJUNA REDDY D Babu Rao K., Mallikarjuna Reddy D. Crack detection methodology in rotor bearing system by DWT based adaptive neuro-fuzzy inference systems Applied Acoustics WOS 0003-682X 2.639
78 March 2022 SMEC DME 13140 Dr. DEGA NAGARAJU Chandrasekar P., Nagaraju D. The Effects of Electroless Ni–P- Coated SiC and Al2O3 on Wear Behaviour and Thermal Stability of AMMCs Arabian Journal for Science and Engineering WOS 2191-4281 2.334
79 March 2022 SMEC DTEE 11168 Dr. SATYAJIT GHOSH Gumber S., Ghosh S., Bera S., Prabhakaran T.V. On the importance of non-ideal sulphate processing of multi- component aerosol haze over urban areas Meteorology and Atmospheric Physics WOS 0177-7971 2.065
80 March 2022 CBCMT DME 10597 Dr. GEETHA MANIVASAGAM Praveenkumar K., Swaroop S., Manivasagam G. Residual Stress Distribution, Phase Transformation, and Wettability Characteristics of Laser Peened Austenitic Stainless Steel Journal of Materials Engineering and Performance WOS 1059-9495 1.819
81 March 2022 SMEC DME 13140 Dr. DEGA NAGARAJU Chandrasekar P., Nagaraju D. The Effect of Electroless Ni–P-Coated Al2O3 on Mechanical and Tribological Properties of Scrap Al Alloy MMCs International Journal of Metalcasting WOS 1939-5981 1.805
82 March 2022 SMEC DTEE 12246 Dr. EDISON GUNDABATTINI  Katoch A., Razak F.A., Suresh A., BS B., Gundabattini E. Performance analysis of nano- refrigerants used in the vapor compression refrigeration system using MATLAB-Simulink Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science WOS 0954-4062 1.762
83 March 2022 SMEC DME 15757 Dr. SENTHIL KUMARAN S Chadha U., Selvaraj S.K., Ashokan H., Hariharan S.P., Mathew Paul V., Venkatarangan V., Paramasivam V. Complex Nanomaterials in Catalysis for Chemically Significant Applications: From Synthesis and Hydrocarbon Processing to Renewable Energy Applications Advances in Materials Science and Engineering WOS 1687-8442 1.726
84 March 2022 SMEC DME 14781
11234
15757
Dr. MANIKANDAN M
Dr. ARIVAZHAGAN N
Dr. SENTHIL KUMARAN S
Sathishkumar M., Manikandan M., Arivazhagan N., Arulmurugan B., Kumaran Selvaraj S., Vignesh M., Rajakumar S., Rajkumar S. Hot corrosion behaviour of constant and pulsed current welded Hastelloy X in Na2SO4, V2O5, and NaCl salt mixture at 900 °C Materials Research Express WOS 2053-1591 1.62
85 March 2022 SMEC DTEE 15729 Dr. PONNUSAMY P Elangovan T., Palanisamy P. Performance analysis of lauric acid embedded with nanoparticles as phase change materials in heat transfer applications Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering WOS 0954-4089 1.620
86 March 2022 SMEC DME 15757 Dr. SENTHIL KUMARAN S Tiwari A., Tiwari A., Bhatia A., Chadha U., Kandregula S., Selvaraj S.K., Bhardwaj P. Nanomaterials for Electromagnetic Interference Shielding Applications: A Review Nano WOS 1793-2920 1.556
87 March 2022 SMEC DAE 14475
13339
Dr. KANNAN C
Dr. ASHOK B
Chidambaram K., Ashok B., Vignesh R., Deepak C., Ramesh R., Narendhra T.M.V., Muhammad Usman K., Kavitha C. Critical analysis on the implementation barriers and consumer perception toward future electric mobility Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering WOS 0954-4070 1.484
88 March 2022 SMEC DTEE 14747 Dr. IMMANUEL SELWYN RAJ A Somashekar V., Immanuel Selwynraj A. Numerical study of unmanned aerial vehicle (UAV) in dry microburst environment using large eddy simulation (LES) model Aircraft Engineering and Aerospace Technology WOS 22667 0.975
89 March 2022 CIMR DME 13954 Dr. RAJA ANNAMALAI A Srikanth M., Siva T., Annamalai A.R. Effect of Rhenium and Gadolinium Additions on the Mechanical Properties of Ti-48Al-2Cr-2Nb Sintered Through Spark Plasma Sintering Strength of Materials WOS 1573-9325 0.620
90 March 2022 SMEC DDA 15283 Dr. DARIUS GNANARAJ S Kandala A.V.U.K., Solomon D.G., Arulraj J.J. Advantages of Taguchi Method compared to Response Surface Methodology for achieving the Best Surface Finish in Wire Electrical Discharge Machining (WEDM) Journal of Mechanical Engineering SCOPUS 1823-5514 -
91 March 2022 SMEC DAE
DME
15780
13304
15744
15259
Dr. PRABU K
Dr. RAVI  K
Dr. RAJAMURUGAN G
Dr. MURALIDHARAN B
Krishnasamy P., Rajamurugan G., Muralidharan B., Krishnaiah R. General practice to enhance bast fiber composite properties for state of art applications-A Review Engineering Research Express SCOPUS 2631-8695 -
92 March 2022 SMEC DME 13613 Dr. SK ARIFUL RAHAMAN Kotbi A., Imran M., Kaja K., Rahaman A., Ressami E.M., Lejeune M., Lakssir B., Jouiad M. Graphene and g-C3N4-Based Gas Sensors Journal of Nanotechnology SCOPUS 1475-7435 -
93 March 2022 SMEC DDA 12507 Dr. AKASH MOHANTY Senapati S., Mohanty A. Studies on Parameters affecting Flow Behaviour of High-Concentration Ash Slurry: Effect of a Natural Drag reducing Agent on Pumping Power during Pipeline Transportation Journal of The Institution of Engineers (India): Series C SCOPUS 2250-0545 -
94 April 2022 SMEC DTEE 15272 Dr. SABOOR S Shaik S., Nundy S., Maduru V.R., Ghosh A., Afzal A. Polymer dispersed liquid crystal retrofitted smart switchable glazing: Energy saving, diurnal illumination, and CO2 mitigation prospective Journal of Cleaner Production WOS 0959-6526 9.297
95 April 2022 SMEC DAE  13339 10347 Dr. ASHOK B
Dr. SENTHIL KUMAR M 
Sathish Kumar T, Ashok B., Senthil Kumar M., Vignesh R., Saiteja P., Ramachandra Bhat Hire K., Harshal Tote M., Pandey R., Jadhav A., Gupta A., Rastogi D., Ayyasamy T. Biofuel powered engine  characteristics improvement through split injection parameter multivariate optimization with titanium based nano- particle additives Fuel WOS 0016-2361 6.609
96 April 2022 SMEC DAE 15287 Dr. BIBHUTI BHUSAN SAHOO Sharma P, Sahoo B.B. Precise prediction of performance and emission of a waste derived Biogas– Biodiesel powered Dual–Fuel engine using modern ensemble Boosted regression Tree: A critique to Artificial neural network Fuel WOS 0016-2361 6.609
97 April 2022 SMEC DAE  13339 10347 Dr. ASHOK B
Dr. SENTHIL KUMAR M 
Perumalla Vijaya Kumar, Ashok B., Kumar M.S., Vignesh R., Bhasker J.P., Kumar A.N. Evaluation of performance, emissions and combustion attributes of CI engine using palmyra biodiesel blend with distinct compression ratios, EGR rates and nano-particles Fuel WOS 0016-2361 6.609
98 April 2022 SMEC DTEE 15272 Dr. SABOOR S Chidubem Iluyemi D., Nundy S., Shaik S., Tahir A., Ghosh A. Building energy analysis using EC and PDLC based smart switchable window in Oman Solar Energy WOS 0038-092X 5.742
99 April 2022 SMEC DAE  13339 Dr. ASHOK B   Jacob A, Ashok B., Muhammad Usman K., Bupesh Raja V.K., Jino L. Synergistic effect of post injection and CART unit in extenuating Tail-Pipe pollutants in CI engine using C. pyrenoidosa microalgae biodiesel Sustainable Energy Technologies and Assessments WOS 2213-1388 5.353
100 April 2022 SMEC DTEE 15272 Dr. SABOOR S Afzal A., Kumar R., Jilte R.D., Samee M., Shaik S., Abdul Razak R.K., Manokar A.M., Saleel C.A. Numerical analysis and machine learning for battery thermal performance cooled with different fluids International Journal of Energy Research WOS 0363-907X 5.164
101 April 2022 SMEC DTEE 14563 Dr. KAMATCHI R Eswaramoorthy N., Rajaram K. Planar perovskite solar cells: Plasmonic nanoparticles-modified ZnO as an electron transport layer for enhancing the device performance and stability at ambient conditions International Journal of Energy Research WOS 0363-907X 5.164
102 April 2022 SMEC DTEE 15272 Dr. SABOOR S Ribu D.C., Rajesh R., Thirumalaikumarasamy D., Kaladgi A.R., Saleel C.A., Nisar K.S., Shaik S., Afzal A. Experimental investigation of erosion corrosion performance and slurry erosion mechanism of HVOF sprayed WC-10Co coatings using design of experiment approach Journal of Materials Research and Technology WOS 2238-7854 5.039
103 April 2022 SMEC DDA 15190 Dr. SOVAN SUNDAR DASGUPTA Dasgupta S.S. Instability attenuation and bifurcation studies of a non-ideal rotor involving time-delayed feedback Nonlinear Dynamics WOS 0924-090X 5.022
104 April 2022 SMEC DME 15744 Dr. RAJAMURUGAN G Singh C Q.J., Rajamurugan G. Vibration and tribological behaviour of flax/wire mesh/hemp composite reinforced with WCFC particles Journal of Manufacturing Processes WOS 1526-6125 5.010
105 April 2022 SMEC DTEE 15272 Dr. SABOOR S Ramesh Kumar R., Razak A., Alshahrani S., Sharma A., Thakur D., Shaik S., Saleel C.A., Afzal A. Vibration analysis of composite exhaust manifold for diesel engine using CFD Case Studies in Thermal Engineering WOS 2214-157X 4.724
106 April 2022 SMEC DTEE 16349 Dr. SAKTHIVADIVEL D Kumar P.G., Prabakaran R., Sakthivadivel D., Somasundaram P., Vigneswaran V.S., Kim S.C. Ultrasonication time optimization for multi-walled carbon nanotube based Therminol-55 nanofluid: an experimental investigation Journal of Thermal Analysis and Calorimetry WOS 0022-5215 4.626
107 April 2022 SMEC DME 15262 Dr. ARAVIND RAJ S Ganapathy S.B., Sakthivel A.R., Sultan M.T.H., Shahar F.S., Shah A.U.M., Khan T., Sebaey T.A. Effect of Prosopis Juliflora Thorns on Mechanical Properties of Plastic Waste Reinforced Epoxy Composites Polymers WOS 2073-4360 4.329
108 April 2022 SMEC DTEE 16371 16349 Dr. BALAJI.K
Dr. SAKTHIVADIVEL D
Manivannan S.P.,( TRA- 16771)  Gunasekaran D.L.,(TRA -17209) Jaganathan G., Natesan S., Muthusamy S.M., Kim S.C., Kumar B., Poongavanam G.K., Duraisamy S. Energy and environmental analysis of a solar evacuated tube heat pipe integrated thermoelectric generator using IoT Environmental Science and Pollution Research WOS 0944-1344 4.223
109 April 2022 SMEC DTEE 12585 13384 Dr. SATHEESH A
Dr. PADMANATHAN  P
Devi N.R., Moolya S., Öztop H.F., Abu- Hamdeh N., Padmanathan P., Satheesh A. A review on ferrofluids with the effect of MHD and entropy generation due to convective heat transfer European Physical Journal Plus WOS 2190-5444 3.911
110 April 2022 SMEC DTEE 15764 Dr. ARUNA KUMAR BEHURA
Dr. CHINMAYA PRASAD MOHANTY
Behura A.K., Mohanty C.P., Singh M.R., Kumar A., Linul E., Rajak D.K. Performance Analysis of Three Side Roughened Solar Air Heater: A Preliminary Investigation Materials WOS 1996-1944 3.623
111 April 2022 SMEC DTEE 15272 Dr. SABOOR S Kumar K., Singh A., Shaik S., Saleel C.A., Aabid A., Baig M. Comparative Analysis on Dehumidification Performance of KCOOH–LiCl Hybrid Liquid Desiccant Air-Conditioning System: An Energy- Saving Approach Sustainability (Switzerland) WOS 2071-1050 3.251
112 April 2022 SMEC DDA 14828 Dr. EDWIN SUDHAGAR P Gunasegeran M., (TRA- 16766)  Edwin Sudhagar P. Free and forced vibration analysis of 3D printed bioinspired sandwich beam using HSDT: Numerical and experimental study Polymer Composites WOS 0272-8397 3.171
113 April 2022 SMEC DAE  13339 Dr. ASHOK B   Jacob A., (TRA- 16066) Ashok B. Biosynthesis of Amyl Alcohol From Scenedesmus quadricauda Microalgae for Light Commercial Vehicle Compression Ignition Engine Using Prediction Models Journal of Energy Resources Technology, Transactions of the ASME WOS 0195-0738 2.903
114 April 2022 SMEC DME 15757 Dr. SENTHIL KUMARAN S Chadha U., Selvaraj S.K., Ravinuthala A.K., Maddini Y., Arasu K., Yadav S., Kumari O., Pant S., Paramasivam V. Bioinspired Techniques in Freeze Casting: A Survey of Processes, Current Advances, and Future Directions International Journal of Polymer Science WOS 1687-9422 2.642
115 April 2022 SMEC DDA 14833 Dr. RAJESH M Dhilipkumar T., (TRA-16639)  Rajesh M. Influence of glass fibre reinforced polymer composite pin reinforcement on shear and dynamic behaviour of composite joint manufactured through co-cure technique Journal of Composite Materials WOS 0021-9983 2.591
116 April 2022 SMEC DTM 14431 Dr. SURAJ KUSHE SHEKHAR Shekhar S.K., Jose T.P. Prevalence of Thanatophobia and Necrophobia in India during the COVID-19 Pandemic Due to Black Fungus Infections Psychiatry (New York) WOS  0033-2747 2.458
117 April 2022 SMEC DDA 13462 Dr. NARENDIRANATH BABU  T Babu T.N., Ali P.S.N., Prabha D.R., Mohammed V.N., Wahab R.S., Vijayalakshmi S. Fault Diagnosis in Bevel Gearbox Using Coiflet Wavelet and Fault Classification Based on ANN Including DNN Arabian Journal for Science and Engineering WOS 2193-567X 2.334
118 April 2022 SMEC DDA 16358 Dr. RAJASEKHARA REDDY MUTRA Mutra R.R., Srinivas J. An optimization-based identification study of cylindrical floating ring journal bearing system in automotive turbochargers Meccanica WOS 0025-6455 2.258
119 April 2022 SMEC DME 13348 Dr. RAMANUJAM R Vignesh M., Ramanujam R., Parande G., Gupta M. Machining of Y2O3 reinforced magnesium rare earth alloys using wire electrical discharge turning process Machining Science and Technology WOS 1091-0344 2.255
120 April 2022 SMEC DME 15744 Dr. RAJAMURUGAN G. Uday K.N., (TRA-16643)  Rajamurugan G. Influence of process parameters and its effects on friction stir welding of dissimilar aluminium alloy and its composites–a review Journal of Adhesion Science and Technology WOS 0169-4243 2.077
121 April 2022 SMEC DDA DME 11151 16099 Dr. SENTHIL KUMAR  S
Dr. SUDHAKARA PANDIAN R
Senthil Kumar S., Sudhakara Pandian R., Pitchipoo P., Narayanasamy P., Senthilkumar T.S. Surface and subsurface investigation of Al-Mg-MoS2composite on performing wire electrical discharge machining Surface Topography: Metrology and Properties WOS 2051-672X 2.038
122 April 2022 SMEC DME 15385 Dr. MURUGAN  M Ali J.M., Jailani H.S., Murugan M. In-Situ Surface Roughness Evaluation of Surfaces Machined with EDM by Image Processing Journal of Nondestructive Evaluation WOS 1573-4862 1.995
123 April 2022 SMEC DTEE 15798 Dr. JAYAPRAKASH NARAYAN M Jayaprakash Narayan M., Chutkey K., Sri Raghu R., Verma S.B. Effect of Passive Flow Control Devices on Base Pressure for Mach Numbers Between 0.5 and 1.4 Journal of Fluids Engineering, Transactions of the ASME WOS 0098-2202 1.995
124 April 2022 SMEC DDA 15190 Dr. SOVAN SUNDAR DASGUPTA Jha A.K., (TRA- 15661) Dasgupta S.S. Steady-State and Bifurcation Analysis of Nonlinear Jumps in a Non-ideal Rotor System Using Magnetorheological Fluid Dampers Journal of Vibration Engineering and Technologies WOS 2523-3920 1.889
125 April 2022 SMEC DDA 13462 Dr. NARENDIRANATH BABU  T Anwarsha A.,(TRA- 19PHD0258) Narendiranath Babu T. A Review on the Role of Tunable Q- Factor Wavelet Transform in Fault Diagnosis of Rolling Element Bearings Journal of Vibration Engineering and Technologies WOS 2523-3920 1.889
126 April 2022 SMEC DME 11234 15757 14781 Dr. ARIVAZHAGAN N
Dr.SENTHIL KUMARAN S
Dr. MANIKANDAN M
Subramani P., Arivazhagan N., Selvaraj S.K., Mancin S., Manikandan M. Influence of hot corrosion on pulsed current gas tungsten arc weldment of aerospace-grade 80A alloy exposed to high temperature aggressive environment International Journal of Thermofluids SCOPUS 2706-9885 -
127 April 2022 SMEC DAE 11259 Dr. SAKTHIVEL P Arjunkumar, Paramhans R., Palanivelu S. Yaw Stability Analysis of a Tractor Semitrailer Using Yaw Plane Model International Journal of Vehicle Structures and Systems SCOPUS 0975-3060 -
128 April 2022 SMEC DAE 13976 Dr. GOVINDHA RASU N Raghavulu K.V.,(TRA-13976) Govindha Rasu N. Taguchi optimization of process parameters used for improving tribological behaviour of graphene nanoparticle dispersed nanolubricant Engineering Research Express SCOPUS 2631-8695 -
129 April 2022 SMEC DME 14802 15262 Dr. JAYAKRISHNA K
Dr. ARAVIND RAJ S
Jayakrishna K., Raj S.A. Influence and relation of sustainability drivers in footwear manufacturing firms using structural equation modelling Progress in Industrial Ecology SCOPUS 1478-8764 -
130 May 2022 CBCMT DME 10597 Dr. GEETHA MANIVASAGAM Acharya S., Gopal V., Gupta S.K., Nilawar S., Manivasagam G., Suwas S., Chatterjee K. Anisotropy of Additively Manufactured Co-28Cr-6Mo Influences Mechanical Properties and Biomedical Performance ACS applied materials
& interfaces
WOS 1944-8244 9.229
131 May 2022 CO2 DTEE 13605 Dr. RANJITHA J Qurat-ul-Ain, Javid A., Ali S., Hasan A., Senthilkumar N., Ranjitha J., Hussain A. Coupling wastewater valorization with sustainable biofuel production: Comparison of lab- and pilot-scale biomass yields of Chlorella sorokiniana grown in wastewater under photoautotrophic and mixotrophic conditions Chemosphere WOS 0045-6535 8.943
132 May 2022 CO2 DAE 10063 Dr. SENTHIL KUMAR  A  Rao L., Zhu Y., Duan Z., Xue T., Duan X., Wen Y., Kumar A.S., Zhang W., Xu J., Hojjati-Najafabadi A. Lotus seedpods biochar decorated molybdenum disulfide for portable, flexible, outdoor and inexpensive sensing of hyperin Chemosphere WOS 0045-6536 8.943
133 May 2022 SMEC DAE  13339 10347 Dr. ASHOK B
Dr. SENTHIL KUMAR  M
Sathish Kumar T., (TRA- 16783) Ashok B., Senthilkumar M., Saiteja P(TRA-13339)., Vignesh R (TRA - ?)., Karthick C (TRA-16423)., Nithin P.S., Durairaj K., Saju N., Agarwal C., Bhutani S., Gadwe J. Enhancement of engine characteristics through zirconium nano particle addition and split injection parameter optimization for the adaptability of eucalyptus biofuel in diesel engine Fuel WOS 0016-2361 8.035
134 May 2022 SMEC DAE  13339 Dr. ASHOK B   Muthuraman V.S (TRA-17222)., Patel A., Shreya V., Vaidyanathan A., Reshwanth K.N.G.L., Karthick C (TRA-16423)., Jacqueline P.J., Jan Gęca M., Ashok B., Sivagami K., Nanthagopal K. Progress on compatibility issues of alcohols on automotive materials: Kinetics, challenges and future prospects- a comprehensive review Process Safety and Environmental Protection WOS 0957-5820 7.926
135 May 2022 SMEC DAE  15287 Dr. BIBHUTI BHUSAN SAHOO Sharma P., Sahoo B.B., Said Z., Hadiyanto H., Nguyen X.P., Nižetić S., Huang Z., Hoang A.T., Li C. Application of machine learning and Box- Behnken design in optimizing engine characteristics operated with a dual-fuel mode of algal biodiesel and waste- derived biogas International Journal of Hydrogen Energy WOS 0360-3199 7.139
136 May 2022 SMEC DAE  15287 Dr. BIBHUTI BHUSAN SAHOO Sharma P., Sahoo B.B. An ANFIS-RSM based modeling and multi- objective optimization of syngas powered dual-fuel engine International Journal of Hydrogen Energy WOS 0360-3200 7.139
137 May 2022 SMEC DTEE 15957 Dr. ANUJ KUMAR Mishra S., Saini G., Saha S., Chauhan A., Kumar A., Maity S. A survey on multi-criterion decision parameters, integration layout, storage technologies, sizing methodologies and control strategies for integrated renewable energy system Sustainable Energy Technologies and Assessments WOS 2213-1388 7.632
138 May 2022 SMEC DDA 15768 Dr. RENOLD ELSEN S Aseer J.R., K S., Bahubalendruni M.V.A.R., Karakoti A., S R.E., Nb K.B. Cellulosic Microfiber Extraction from Ecofriendly Bahunia Racemosa and Its Characterization Journal of Natural Fibers WOS 1544-0478 5.323
139 May 2022 SMEC DDA 14461
17046
Dr. NAVEEN J
Dr. MALLIKARJUNA REDDY  D
Patil S., Mallikarjuna Reddy D., Naveen J., Swamy S.S., Vignesh P., Venkatachalam G. Low-Velocity Impact and Compression after Impact Properties of Hemp and Jute Fiber Reinforced Epoxy Composites Journal of Natural Fibers WOS 1544-0479 5.323
140 May 2022 CO2 DTEE 13611
13605
Dr. VIJAYALAKSHMI S
Dr.J. RANJITHA
Rajivgandhi G., Ramachandran G., Chelliah C.K., Maruthupandy M., Quero F., S V., AL- Mekhlafi F.A., Wadaan M.A., Ranjitha J., Li W.-J. Green microalgal strain Chlorella vulgaris isolated from industrial wastewater with remediation capacity Environmental Technology and Innovation WOS 2352-1864 7.758
141 May 2022 SMEC DDA 13618 Dr. NIRANJANA BEHERA JS S (TRA-13618)., Behera N. Statistical analysis of fuidized dense phase conveying of fine particles Powder Technology WOS 0032-5910 5.640
142 May 2022 SMEC DTEE 16349 Dr. SAKTHIVADIVEL D Sakthivadivel D., Ganesh Kumar P., Prabakaran R., Vigneswaran V.S., Nithyanandhan K., Kim S.C. A neem oil-based biodiesel with DEE enriched ethanol and Al2O3nano additive: An experimental investigation on the diesel engine performance Case Studies in Thermal Engineering WOS 2214-157X 6.268
143 May 2022 SMEC DME 14807 Dr. SAMPATH KUMAR  T Tamiloli N., Venkatesan J., Raja Raghu Vamsi Krishna P., Sampath Kumar T. Time domain and frequency domain of coated milling inserts using FFT spectrum Materials and Manufacturing Processes WOS 1042-6914  4.616
144 May 2022 SMEC DTEE 15272 Dr. SABOOR S Sharma J., Soni S., Paliwal P., Saboor S., Chaurasiya P.K., Sharifpur M., Khalilpoor N., Afzal A. A novel long term solar photovoltaic power forecasting approach using LSTM with Nadam optimizer: A case study of India Energy Science and Engineering WOS 2050-0505 4.035
145 May 2022 SMEC DDA 12625 17099 Dr. VASUDEVAN R
Dr. GANAPATHI M
Mohamed H., Gunasekaran V., Pitchaimani J., Rajamohan V., Kotriwar G., Manickam G. A comprehensive damping study of variable stiffness composite rectangular/skew laminates reinforcement with curvilinear fibers by higher-order shear flexible model Mechanics of Advanced Materials and Structures WOS 1537-6494 4.030
146 May 2022 SMEC DME 13970 Dr. VENKATESHWARLU  B Kalangi C., Bolleddu V. Microstructural characteristics and mechanical properties of thermally sprayed conventional ceramic coatings reinforced with multiwalled carbon nanotubes Journal of Reinforced Plastics and Composites WOS 0731-6844 3.383
147 May 2022 SMEC DME 11819 Dr. VEZHAVENDHAN R Priya K.S., Vijaya Kumar K.R., Suresh G., Ganesamoorthy R., Vezhavendhan R., Meenakshi C.M. Long term accelerated influence on thermo-mechanical properties of glass/carbon fiber reinforced interpenetrating polymer network hybrid composites Journal of Reinforced Plastics and Composites WOS 0731-6845 3.383
148 May 2022 SMEC DDA 17070 Dr. CHINMAYA SAHU Sahu C., Parhi D.R. Navigational strategy of a biped robot using regression-adaptive PSO approach Soft Computing WOS 1432-7643 3.643
149 May 2022 SMEC DDA 14781 Dr. MANIKANDAN M Kumar M.D.B(TRA - 16776)., Manikandan M. Evaluation of Microstructure, Residual Stress, and Mechanical Properties in Different Planes of Wire + Arc Additive Manufactured Nickel-Based Superalloy Metals and Materials International WOS 1598-9623 3.451
150 May 2022 SMEC DDA 14769 Dr. RAMAKRISHNAN R Narayanan V.L., Ramakrishnan R., Rengaswamy R. Real-Time testing of novel robust digital pitch controller for digital hydraulic pitch system in wind turbine Energy Sources, Part A: Recovery, Utilization and Environmental Effects WOS 1556-7036 2.490
151 May 2022 SMEC DTEE 15272 Dr. SABOOR S Arul G.P., Thulasi S., Kumar P., Arunprasad V., Shaik S., Abbas M., Rajendran P., Khan S.A., Saleel C.A. Investigation of Dual–Pass Inclined Oscillating Bed Solar Dryer for Drying of Non-Parboiled Paddy Grains Sustainability (Switzerland) WOS 2071-1050 3.889
152 May 2022 SMEC DTEE 15272 Dr. SABOOR S Kumar R., Cuce E., Kumar S., Thapa S., Gupta P., Goel B., Saleel C.A., Shaik S. Assessment of the Thermo-Hydraulic Efficiency of an Indoor-Designed Jet Impingement Solar Thermal Collector Roughened with Single Discrete Arc- Shaped Ribs Sustainability (Switzerland) WOS 2071-1051 3.889
153 May 2022 SMEC DME 10223 Dr. ANTHONY XAVIOR M Periane Natarajan S., Vaudreuil S., Chibane H., Morandeau A., Xavior M.A., Cormier J., Leroy R., Duchosal A. Tool life and surface integrity characteristics in milling of SLM and C&W inconel 718 in dry and MQL condition International Journal of Advanced Manufacturing Technology WOS 0268-3768 3.563
154 May 2022 SMEC DDA 14461 14828 Dr. MALLIKARJUNA REDDY D
Dr. EDWIN SUDHAGAR.P
Arun Kumar K (TRA-14461)., Arumugam A.B., Mallikarjuna Reddy D., Edwin Sudhagar P., Anbumani P., Kassa M.K., Agarwal D. Prediction of influences of size and locations of delamination on dynamic characteristics of laminated composite plate using particle swarm optimization and artificial neural network Polymer Composites WOS 1548-0569 3.531
155 May 2022 SMEC DME 14802 Dr. JAYAKRISHNA K K.E.K V., Nadeem S.P., Ravichandran M., Ethirajan M (TRA-14802)., Kandasamy J. Resilience strategies to recover from the cascading ripple effect in a copper supply chain through project management Operations Management Research WOS 1936-9735 7.032
156 May 2022 SMEC DTEE 15272 Dr. SABOOR S Ahmad J., Kontoleon K.J., Al-Mulali M.Z., Shaik S., Ouni M.H.E., El-Shorbagy M.A. Partial Substitution of Binding Material by Bentonite Clay (BC) in Concrete: A Review Buildings WOS 2075-5309  3.324
157 May 2022 SMEC DDA 12625 17099 Dr. VASUDEVAN R
Dr. GANAPATHI M
Gunasekaran V., Gulhane S., Gupta S., Pitchaimani J., Rajamohan V., Manickam G. Structural-Acoustic Response Analysis of Variable Stiffness Laminates with Inherent Material Damping International Journal of Structural Stability and Dynamics WOS 0219-4554 2.558
158 May 2022 SMEC DME 11819 Dr. VEZHAVENDHAN R Raman V.V., Kumar P.S., Sunagar P., Bommanna K., Vezhavendhan R., Bhattacharya S., Prabhu S.V., Sasikumar B. Investigation on Mechanical Properties of Bamboo and Coconut Fiber with Epoxy Hybrid Polymer Composite Advances in Polymer Technology WOS 0730-6679  2.502
159 May 2022 SMEC DME 11234 Dr. ARIVAZHAGAN  N Adarsh S.J (TRA-16782)., Natarajan A. Review on the advancements and relevance of emerging joining techniques for aluminium to polymers/carbon fibre- reinforced polymer lightweight hybrid structures Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications WOS 1464-4207 2.663
160 May 2022 SMEC DDA 14792 17039 Dr. BENEDICT THOMAS
Dr. ASHIRBAD SWAIN
Singhal M., Jain A., Thomas B., Swain A. Investigation of graphene nanoplatelets- deposited textured metal matrix composite plates for improved mechanical properties: a numerical approach Journal of the Brazilian Society of Mechanical Sciences and Engineering WOS 1678-5878 2.361
161 May 2022 SMEC DTEE 16170 Dr. GAURAV GUPTA Shejkar S.K., Agrawal B., Agrawal A., Gupta G., Pati P.R. Influence of filler content and surface modification on physical and mechanical properties of epoxy/walnut shell particulate composites Journal of Adhesion Science and Technology WOS 0169-4243 2.077
162 May 2022 SMEC DME 15757 Dr. SENTHIL KUMARAN S Chadha U., Sinha S., Jonna J., Goswami M., Ghani H., Nair K., Pandey N., Kataray T., Selvaraj S.K., Bhardwaj P., Banavoth M., Sonar P. Review - Chemical Structures and Stability of Carbon-doped Graphene Nanomaterials and the Growth Temperature of Carbon Nanomaterials Grown by Chemical Vapor Deposition for Electrochemical Catalysis Reactions ECS Journal of Solid State Science and Technology WOS 2162-8769 2.07
163 May 2022 SMEC DDA 11551 Dr. VELU M Saju T(TRA-16637)., Velu M. Characterization of Welded Joints of Dissimilar Nickel-Based Superalloys by Electron Beam and Rotary Friction Welding Journal of Materials Engineering and Performance WOS 1059-9495 2.036
164 May 2022 SMEC DME 15259 Dr. MURALIDHARAN B Kumaran V., Muralidharan B. A thermophysical modelling of electric discharge coating process Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science WOS 0954-4062 1.762
165 May 2022 SMEC DME 13140
15757
Dr. DEGA NAGARAJU
Dr. SENTHIL KUMARAN S
Kiran B., Nagaraju D., Selvaraj S.K., Molla B. Experimental and Mathematical Studies for Optimality of GTAW Parameters on Similar and Dissimilar Steel Substrates Advances in Materials Science and Engineering WOS 1687-8434 2.098
166 May 2022 SMEC DME 15757 Dr. SENTHIL KUMARAN S Adefris Legesse A., Desalegn D., Selvaraj S.K., Paramasivam V., Chadha U. Experimental Investigation of Sorghum Stalk and Sugarcane Bagasse Hybrid Composite for Particleboard Advances in Materials Science and Engineering WOS 1687-8435 2.098
167 May 2022 SMEC DDA 16346 Dr. GUNJI BALA MURALI Ashok D., Raju Bahubalendruni M.V.A., Johnney Mertens A., Balamurali G. A novel nature inspired 3D open lattice structure for specific energy absorption Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering WOS 2041-3009 1.822
168 May 2022 SMEC DTM 12420 Dr. GEMINI V JOY Lathabhavan R., Joy G.V., Sudevan S. Mental Health Concerns of Dowry Harassment Survivors in India: A Multi- Level Mixed Method Study Journal of Loss and Trauma WOS 1532-5024 1.063
169 May 2022 CO2 DTEE 10063
14486
Dr. SENTHIL KUMAR  A
Dr. SREEJA SADASIVAN
Sadasivan S., Arumugam S.K., Aggarwal M.C. Computational study of combined effects of tip leakage jets and wetness on the performance of steam turbine exhaust system using actuator disc model Progress in Computational Fluid Dynamics WOS 1468-4349 1.048
170 May 2022 SMEC DME 16160 Dr. MD FASEEULLA KHAN Firouzi A., Yazdani S., Tavangar R., Shakerifard B., Mohammad F.K. Austempering of PM HSS ASP2030 for improved fracture toughness Metallurgical Research and Technology WOS 2271-3646  0.946
171 May 2022 SMEC DTEE 14747 Dr. IMMANUEL SELWYN RAJ  A V S (TRA-14747)., A I.S. Aerodynamic study of low Reynolds number airfoil and mini-unmanned aerial vehicle in simulated rain environment Aircraft Engineering and Aerospace Technology WOS 0002-2667 0.975
172 May 2022 SMEC DDA 14833 Dr. RAJESH M Rajesh M., Sivakumar R. LES predictions of confinement effect on swirling flow generated by single helical axial swirler Aircraft Engineering and Aerospace Technology WOS 0002-2667 0.975
173 May 2022 SMEC DDA 13618 Dr. NIRANJANA BEHERA Suryawanshi A (TRA-17PHD0269)., Behera N. Dental composite resin: a review of major mechanical properties, measurements and its influencing factors [Zahnmedizinischer Kompositharz: Eine Übersicht über wesentliche mechanische Eigenschaften, Messungen und ihre beeinflussenden Faktoren] Materialwissenschaft und Werkstofftechnik WOS 1521-4052 1.034
174 May 2022 SMEC DTM DME 16380  14807 Dr. VINCENT HERALD WILSON
Dr. SAMPATH KUMAR T
Perumal A., Kailasanathan C., Wilson V.H., Sampath Kumar T., Stalin B., Rajkumar P.R. Machinability of Titanium alloy 6242 by AWJM through Taguchi method Materials Today: Proceedings SCOPUS 2214-7853 -
175 May 2022 SMEC DAE 11259 Dr. SAKTHIVEL  P Venugopal K., Halder P., Susarla V., Palanivelu S. Experimental Modal Analysis of Radiator Fan Module to Predict its Influence of Structural Characteristics on Vibration and Noise Contribution International Journal of Engineering, Transactions B: Applications SCOPUS 1735-9244 -
176 May 2022 SMEC DME 15757
14781
Dr. SENTHIL KUMARAN S
Dr. MANIKANDAN  M
Gyaneshwar A., Selvaraj S.K., Ghimire T., Mishra S.J., Gupta S., Chadha U., Manoharan M., Paramasivam V. A Survey of Applications of MFC and Recent Progress of Artificial Intelligence and Machine Learning Techniques and Applications, with competing fuel cells Engineering Research Express SCOPUS 2631-8695 -
177 May 2022 SMEC DTEE 12246 Dr. EDISON GUNDABATTINI  Gavirineni N.K (TRA-14PHD0278)., Gundabattini E. Enhancing the energy efficiency of a supercritical thermal power plant through improved plant load factor, and optimized performance of auxiliary equipment International Journal of Design and Nature and Ecodynamics SCOPUS 1755-7437 -
178 May 2022 SMEC DAE 15287 Dr. BIBHUTI BHUSAN SAHOO Pradhan P., Purohit A., Sangita Mohapatra S., Subudhi C., Das M., Ku Singh N., Bhusan Sahoo B. A computational investigation for the impact of particle size on the mechanical and thermal properties of teak wood dust (TWD) filled polyester composites Materials Today: Proceedings SCOPUS 2214-7853 -
179 May 2022 SMEC DME 12475 14836 14802 Dr. RAJYALAKSHMI G
Dr. JOHN RAJAN A
Dr. JAYAKRISHNA K
Vimal K.E.K., Mathiyazhagan K., Manojkummar M., Rajyalakshmi G., Rajan A.J., Kandasamy J. Application of integrated environmentally failure modes and effects analysis and environmentally conscious quality function deployment for sustainable product design International Journal of Advanced Operations Management SCOPUS 1758-9398 -
180 May 2022 SMEC DAE 12449 Dr. THUNDIL KARUPPA RAJ R Bageerathan T., Rajagopal T.K.R. Investigation on elevation of sloshing liquid in the square tank under excitation using CFD and RSM International Journal of Environmental Technology and Management SCOPUS 1466-2132 -
181 May 2022 SMEC DME 14802 Dr. JAYAKRISHNA K K.E.K V., Raja S., Yendeti V.S.P(17BME0457)., Kancharla A(17BME0828)., Kandasamy J. Investigating the effect of carbon tax on sharing network participation Journal of Modelling in Management SCOPUS 1746-5664 -
182 May 2022 SMEC DAE 15786 Dr. VIJESH V JOSHI Maithani A(18BME0775)., Sahni I(17BME0899)., Joshi V.V. qA review of Thermal, Physical, electrical properties of spider silk and their experimental setups Materials Today: Proceedings SCOPUS 2214-7855 -
183 May 2022 SMEC DDA 14781 Dr. MANIKANDAN M Muthukumaran N., Kathiresan G., Shree Raam M.N., Chandru G., Dineshkumar S., Chiranjeevi K., Rajkumar S., Manikandan M., Arulmurugan B. Comparative studies on weldability and mechanical characteristics of semi- killed steel using different arc welding technique Materials Today: Proceedings SCOPUS 2214-7855 -
184 May 2022 SMEC DDA 13315 Dr. VENKATESAN K Kannan V. Experimental Study of an Eco-friendly Turning Process of Nimonic 75 Combining Minimum Quantity Lubrication and Hexagonal Boron Nitride-Enhanced Neem and Jatropha Oil Nanofluids Journal of The Institution of Engineers (India): Series C SCOPUS 2250-0545 -
185 May 2022 SMEC DME 16160 Dr. MD FASEEULLA KHAN Rajoria V(18BME0022)., Nain G(18BME0692)., Vijayan S., Prasad C.H., Damodaram R., Karthik G.M., Khan F. Development of SS 304L composite coatings on mild steel substrate using friction surfacing and wear characterization Materials Today: Proceedings SCOPUS 2214-7855 -
186 May 2022 SMEC DTEE 16170 Dr. GAURAV GUPTA Girge A., Goel V(18BME0708)., Amish A (18BME0694)., Gupta G. Physical and mechanical characterization of marble Dust/Wheat straw fiber filled polymer composites Materials Today: Proceedings SCOPUS 2214-7855 -
187 May 2022 SMEC DME 15792 Dr. AHANKARI SANDEEP SURESHRAO Nargatti K., Ahankari S. Additive Manufacturing of Supercapacitor Electrodes-Materials, Methods and Design Key Engineering Materials SCOPUS 1013-9826 -
188 May 2022 CIMR DDA 14789 Dr. ARIVARASU M Roshith P., Arivarasu M. Improvements on hot corrosion behaviour of HVOF coated CO2laser beam and pulsed gas tungsten arc weldments in 2.5% sulphur gas plus molten salt in industrial waste incinerator environment Engineering Research Express SCOPUS 2631-8695 -
189 June 2022 SMEC DDA 16351 16352 Dr. DSILVA WINFRED  RUFUSS D
Dr. ARULVEL S
Dsilva Winfred Rufuss D., Kapoor V., Arulvel S., Davies P.A. Advances in forward osmosis (FO) technology for enhanced efficiency and output: A critical review Journal of Cleaner Production SCOPUS 0959-6526 -
190 June 2022 SMEC DAE  13339 Dr. ASHOK B   Saiteja P., Ashok B. Study on interactive effects of CRDi engine operating parameters through RSM based multi-objective optimization technique for biofuel application Energy SCOPUS 0360-5442 -
191 June 2022 SMEC DAE  13339 Dr. ASHOK B   Sathish Kumar T(TRA-16783)., Vignesh R., Ashok B., Saiteja P., Jacob A(TRA-16066)., Karthick C(TRA-18943)., Jeevanantham A.K., Senthilkumar M., Muhammad Usman K. Application of statistical approaches in IC engine calibration to enhance the performance and emission Characteristics: A methodological review Fuel SCOPUS 0016-2361 -
192 June 2022 SMEC DTEE 15272 Dr. SABOOR S Sheik M.A., Aravindan M.K., Beemkumar N., Chaurasiya P.K., Jilte R., Shaik S., Afzal A. Investigation on the thermal management of solar photo voltaic cells cooled by phase change material Journal of Energy Storage SCOPUS 2352-152X -
193 June 2022 SMEC DTEE 15272 Dr. SABOOR S Ramana Maduru V., Shaik S., Cuce E., Afzal A., Panchal H., Mert Cuce P. UV coated acrylics as a substitute for generic glazing in buildings of Indian climatic conditions: Prospective for energy savings, CO2 abatement, and visual acceptability Energy and Buildings SCOPUS 0378-7788 -
194 June 2022 SMEC DTEE 14800 Dr. TAPANO KUMAR HOTTA Suresh C., Kumar Hotta T., Saha S.K. Phase change material incorporation techniques in building envelopes for enhancing the building thermal Comfort- A review Energy and Buildings SCOPUS 0378-7788 -
195 June 2022 SMEC DAE 15780 Dr. PRABU K Mylsamy G(TRA-17202)., Krishnasamy P. A Review on Natural Plant Fiber Epoxy and Polyester Composites–Coating and Performances Journal of Natural Fibers WOS 1544-0479 4.507
196 June 2022 ARC DAE 14463 Dr. THANGARAJA J S G., Munuswamy D., Subbiah G., Devarajan Y., Mishra R., Thangaraja J. Experimental research on waste and inedible feedstock as a partial alternate fuel: environmental protection and energy-saving initiative Biomass Conversion and Biorefinery WOS 2190-6815 4.050
197 June 2022 SMEC DTEE 15272 Dr. SABOOR S Ramesh C., Vijayakumar M., Alshahrani S., Navaneethakrishnan G., Palanisamy R., Natrayan L., Saleel C.A., Afzal A., Shaik S., Panchal H. Performance enhancement of selective layer coated on solar absorber panel with reflector for water heater by response surface method: A case study Case Studies in Thermal Engineering SCOPUS 2214-157X -
198 June 2022 CIMR DME 13954 Dr. RAJA ANNAMALAI Gecil Evangeline T(TRA-17829)., Raja Annamalai A. Dielectric properties of conventional and microwave sintered Lanthanum doped CaCu3Ti4O12 ceramics for high- frequency applications Ceramics International SCOPUS 0272-8842 -
199 June 2022 SMEC DDA 12625 Dr. VASUDEVAN R Elangovan H(TRA-16068)., Rajamohan V. Dynamic characterization of tapered composite sandwich plate with honeycomb core: Numerical and experimental investigations Thin-Walled Structures SCOPUS 0263-8231 -
200 June 2022 CO2 DAE 16348 Dr. PRAVEEN KUMAR G Prabakaran R., Sivalingam V., Kim S.C., Ganesh Kumar P., Praveen Kumar G. Future refrigerants with low global warming potential for residential air conditioning system: a thermodynamic analysis and MCDM tool optimization Environmental Science and Pollution Research WOS 1614-7499 5.190
201 June 2022 CBCMT DME 10597 Dr. GEETHA MANIVASAGAM Praveenkumar K(19PHD0419)., Swaroop S., Manivasagam G. Effect of multiple laser peening on microstructural, fatigue and fretting-wear behaviour of austenitic stainless steel Surface and Coatings Technology SCOPUS 0257-8972 -
202 June 2022 SMEC DDA 14828 Dr. EDWIN SUDHAGAR P Gunasegeran M (TRA-16766)., Edwin Sudhagar P. Investigation of free and forced vibration of GFRP corrugated bio-inspired sandwich beam with HSDT: Numerical and experimental study Mechanics of Advanced Materials and Structures WOS 1537-6494  3.338
203 June 2022 SMEC DDA DTEE 15267             15767 Dr. ASHOK K
Dr. SEKARAPANDIAN N
Kannaiyan A., Natarajan S., Vinoth B.R. Stability of a laminar pipe flow subjected to a step-like increase in the flow rate Physics of Fluids WOS 1070-6631 4.534
204 June 2022 SMEC DDA 12625 14828 Dr. VASUDEVAN R
Dr. EDWIN SUDHAGAR P
Rajamohan V., Sudhagar P.E., Praveen A.P., Topal U., Panda S.K., Vo-Duy T. Optimal Response Prediction of Composite Honeycomb Sandwich Plate: Theoretical and Experimental Verification International Journal of Applied Mechanics WOS 1758-8251 3.951
205 June 2022 SMEC DTEE 15272 Dr. SABOOR S Fayaz H., Khan S.A., Saleel C.A., Shaik S., Yusuf A.A., Veza I., Fattah I.M.R., Rawi N.F.M., Asyraf M.R.M., Alarifi I.M. Developments in Nanoparticles Enhanced Biofuels and Solar Energy in Malaysian Perspective: A Review of State of the Art Journal of Nanomaterials WOS 1687-4110 3.791
206 June 2022 SMEC DME 15744 Dr. RAJAMURUGAN G Singh C Q.J., Rajamurugan G. Importance of WCFC particle on the mechanical and tribological performance of flax/hemp epoxy composite Particulate Science and Technology WOS 0272-6351 2.628
207 June 2022 SMEC DDA 13618 Dr. NIRANJANA BEHERA JS S., Behera N. Prediction of flow mode transition in pneumatic conveying of fine particles using CFD Particulate Science and Technology WOS 0272-6351 2.628
208 June 2022 CIMR DME 17041 Dr. ASHISH KUMAR Harshavardhana N., Sundar Singh Sivam S.P., Kumar G., Saxena A.K. A study on microstructure and recrystallization kinetics on low deformed pure ETP copper Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications WOS 1464-4207 2.663
209 June 2022 SMEC DME 15274 Dr. CHINMAYA PRASAD MOHANTY Shastri R.K., Mohanty C.P. A Cost Effective Approach to Explore the Electrical Discharge Machined Surface Characteristics of Nimonic C263 Superalloy Journal of Materials Engineering and Performance WOS 1059-9495 2.036
210 June 2022 SMEC DDA 14769 Dr. RAMAKRISHNAN R Kumar M.N.V.R.L., Ramakrishnan R. Optimization of Fused Deposition Modeling Process Parameters and Dynamic Mechanical Analysis of 3D Printed Polycarbonate/Acrylonitrile- Butadiene-Styrene Composite Loaded with Tetrabromobiphenol-A and Microcrystalline Cellulose Journal of Materials Engineering and Performance WOS 1059-9495 2.036
211 June 2022 CIMR DME 17041 Dr. ASHISH KUMAR Ahmadian P., Akbarzadeh A., Asadi P., Saxena A.K. Achieving an Optimal Balance of Strength and Elongation in AA 1050 Aluminum Alloy via Equal Channel Angular Pressing, Intermediate Annealing, and Post-Rolling Journal of Materials Engineering and Performance WOS 1059-9495 2.036
212 June 2022 SMEC DDA 13618 Dr. NIRANJANA BEHERA Suryawanshi A.S(TRA-17PHD0269)., Behera N. Prediction of abrasive wears behavior of dental composites using an artificial neural network Computer Methods in Biomechanics and Biomedical Engineering WOS 1025-5842 1.669
213 June 2022 SMEC DME 11234 Dr. ARIVAZHAGAN N Sandeep R(TRA-16778)., Natarajan A. Application of machine learning approaches to predict joint strength of friction stir welded aluminium alloy 7475 and PPS polymer hybrid joint Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science WOS  0954-4062 1.758
214 June 2022 SMEC DME 15757 Dr. SENTHIL KUMARAN S Venkit H(TRA-17844)., Selvaraj S.K. Review on latest trends in friction-based additive manufacturing techniques Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science WOS  0954-4062 1.758
215 June 2022 SMEC DTM 15850 Dr. JOSE S Ramkumar M.S., Reddy C.S.R., Ramakrishnan A., Raja K., Pushpa S., Jose S., Jayakumar M. Review on Li-Ion Battery with Battery Management System in Electrical Vehicle Advances in Materials Science and Engineering WOS 1687-8434  2.098
216 June 2022 SMEC DTEE 16170 Dr. GAURAV GUPTA Pati P.R., Satapathy A., Gupta G., Ray S. Optimizing wear analysis of plasma sprayed Linz-Donawitz slag-Al2O3 coatings using experimental design and neural network Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology WOS 1350-6501 1.818
217 June 2022 SMEC DDA DME DME DME 14781 12475 13348   11234 Dr. MANIKANDAN M
Dr. RAJYALAKSHMI G
Dr. RAMANUJAM R
Dr. ARIVAZHAGAN N
Kumar G.R., Sathishkumar M., Vignesh M., Manikandan M., Rajyalakshmi G., Ramanujam R., Arivazhagan N. Metal additive manufacturing of commercial aerospace components – A comprehensive review Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering WOS 0954-4089 1.620
218 June 2022 SMEC DTEE 18063    14032 Dr. UMA MAHESWARARAO GADDA
Dr. BIBIN JOHN
Uma Maheswararao G., Jaya Krishna D., John B. Melting and Solidification Behaviour of Some Organic Phase Change Materials Applicable to Low Temperature Heat Storage Applications International Journal of Thermophysics WOS 0195-928X 2.416
219 June 2022 SMEC DTEE 14747 Dr. IMMANUEL SELWYN RAJ A Somashekar V (16PHD0601)., Immanuel Selwynraj A. Experimental and numerical study on heatwave effect over an airfoil for unmanned aerial vehicle applications Aircraft Engineering and Aerospace Technology WOS 0002-2667 0.975
220 June 2022 SMEC DDA 11475 Dr. GIRIRAJ M Arun K.K., Navaneeth V.R., Prabhu S., Ramesh kumar M., Giriraj M. Experimental investigation of turning process parameter under several cutting conditions for duplex steels for minimization of cutting temperature Materials Today: Proceedings SCOPUS 2214-7855 -
221 June 2022 SMEC DAE 12832 Dr. RAMMOHAN A Gupta E., Bora D.K.S., Rammohan A. Design and analysis of brake system for FSAE race car Engineering Research Express SCOPUS 2631-8695 -
222 June 2022 SMEC DME 15744 Dr. RAJAMURUGAN G Uday K.N(TRA-16643)., Senthilraj K(TRA-17203)., Rajamurugan G. Exfoliation corrosion susceptibility on friction stir welded aluminium 6061/Cr2O3composite Engineering Research Express SCOPUS 2631-8695 -
223 June 2022 SMEC DTEE 12246 Dr. GUNDABATTINI EDISON Gavirineni N.K(14PHD0278)., Gundabattini E. Investigation of the Performance of a 660-MW Supercritical Boiler in Terms of
NOx Emission and Enhancing the Thermal Efficiency by Optimizing the Air Distribution System
Journal of The Institution of Engineers (India): Series C WOS 2250-0545 1.42
224 June 2022 SMEC DME 14807 Dr. SAMPATH KUMAR T Tamiloli N., Venkatesan J., Kumar T.S., Ashwin A.J., Kalitchin Z. MILLING PARAMETERS ON AA-6082-T6 ALLOY USING GREY RELATIONAL ANALYSIS, REGRESSION, ANN, AND GA MODELS Journal of the Balkan Tribological Association SCOPUS 1310-4772 -
225 June 2022 SMEC DME 11106 Dr. JEEVANANTHAM A.K. Chaitanya S.V., Dhande D.Y., Jeevanantham A.K. Complex Assembly Analysis for Geometric and Dimensional Tolerance to Obtain Selective Assembly from Partitioned Bins Using a Multi-objective Approach to Control Clearance Variation of IC Engine Journal of The Institution of Engineers (India): Series C WOS 2250-0545 1.42
226 June 2022   DDA 14769 Dr. RAMAKRISHNAN R Lakshmi Narayanan V., Ramakrishnan R. Model-based design optimisation of digital hydraulic pitch actuator for a large-scale wind turbine International Journal of Ambient Energy WOS 0143-0750 2.326
227 June 2022 SMEC DDA 16358 Dr. RAJASEKHARA REDDY MUTRA Shaik J.H., Mutra R.R., Galal A.M., Tanneeru S.R. Investigation of chatter prediction in end milling using morphological studies on aluminum alloy (Al6061) Noise and Vibration Worldwide WOS  0957-4565 0.946
228 June 2022 SMEC DTEE 12246 Dr. GUNDABATTINI EDISON BS B (TRA-16779)., Gundabattini E. Investigation on the density of Al2O3/R1234yf, TiO2/R1234yf and CuO/R1234yf nano-refrigerants Proceedings of the Institution of Mechanical Engineers, Part N: Journal of Nanomaterials, Nanoengineering and Nanosystems WOS 2397-7914 2.263
229 June 2022 SMEC DTEE 15729 Dr. PONNUSAMY P Selvaraj K., Theivendren P., Pavadai P., Sureshbabu R.K.P., Ravishankar V., Palanisamy P., Gopal M., Dharmalingam S.R., Sankaranarayanan M. Impact of Physicochemical Parameters on Effective Extraction of Bioactive Compounds from Natural Sources: An Overview Current Bioactive Compounds WOS 1573-4072 1.309
230 June 2022 SMEC DME 15757 Dr. SENTHIL KUMARAN S Chadha U(18BME0748)., Selvaraj S.K., Gunreddy N., Sanjay Babu S., Mishra S., Padala D., Shashank M., Mathew R.M., Kishore S.R., Panigrahi S., Nagalakshmi R., Kumar R.L., Adefris A. A Survey of Machine Learning in Friction Stir Welding, including Unresolved Issues and Future Research Directions Material Design and Processing Communications WOS 2577-6576 -
231 July 2022 CO2 DTEE 10063 Dr. SENTHIL KUMAR  A  Guo C., Cao Y., Li J., Li H., Kumar Arumugam S., Oleksandr S., Chen F. Solvent-free green synthesis of nonflammable and self-healing polymer film electrolytes for lithium metal batteries Applied Energy WOS 0306-2619 11.446
232 July 2022 CO2 DTEE 13605 Dr. RANJITHA J Gandam P.K., Chinta M.L., Pabbathi N.P.P., Baadhe R.R., Sharma M., Thakur V.K., Sharma G.D., Ranjitha J., Gupta V.K. Second-generation bioethanol production from corncob – A comprehensive review on pretreatment and bioconversion strategies, including techno-economic and lifecycle perspective Industrial Crops and Products WOS 0926-6690 6.449
233 July 2022 CIMR DME 13954
13576
Dr. RAJA ANNAMALAI
Dr. NARENDRA KUMAR  U
Somasundaram M., Uttamchand N.K., Annamalai A.R., Jen C.-P. Insights on Spark Plasma Sintering of Magnesium Composites: A Review Nanomaterials WOS 2079-4991 5.719
234 July 2022 SMEC DDA 15768 Dr. RENOLD ELSEN S Ravoor J., S R.E. A study on retention of MWCNT in robocasted MWCNT-HAP scaffold structures using vacuum sintering technique and their characteristics Ceramics International WOS 0272-8842 5.532
235 July 2022 SMEC DTEE 16349 Dr. SAKTHIVADIVEL D Kuppusamy P.P., Bhatia A., Verma A., Shah N.R., Pratyush P., Shanmugarajan V., Kim S.C., Poongavanam G.K., Duraisamy S. Accumulation of biomedical waste during the COVID-19 pandemic: concerns and strategies for effective treatment Environmental Science and Pollution Research WOS 0944-1344 5.190
236 July 2022 SMEC DME 15262 14802 Dr. ARAVIND RAJ S
Dr. JAYAKRISHNA K
Hameed A.Z., Raj S.A., Kandasamy J., Baghdadi M.A., Shahzad M.A. Chitosan: A Sustainable Material for Multifarious Applications Polymers WOS 2073-4360 4.967
237 July 2022 SMEC DDA 17046 Dr. NAVEEN J Bakhori S.N.M., Hassan M.Z., Bakhori N.M., Rashedi A., Mohammad R., Md Daud M.Y., Aziz S.A., Ramlie F., Kumar A., Naveen J. Mechanical Properties of PALF/Kevlar- Reinforced Unsaturated Polyester Hybrid Composite Laminates Polymers WOS 2073-4360 4.967
238 July 2022 SMEC DTM 15850 Dr. JOSE S Jose E., Agarwal P., Zhuang J., Swaminathan J. A multi-criteria decision making approach to evaluating the performance of Indian railway zones Annals of Operations Research WOS 0254-5330 4.820
239 July 2022 SMEC DAE 13339 Dr. ASHOK B Saiteja P., Ashok B., Wagh A.S., Farrag M.E. Critical review on optimal regenerative braking control system architecture, calibration parameters and development challenges for EVs International Journal of Energy Research WOS 0363-907X 4.672
240 July 2022 SMEC DTEE 14563 Dr. KAMATCHI  R Eswaramoorthy N., Arulraj A., Mangalaraja R.V., Pitchaiya S., Rajaram K. Nanoscale interfacial engineering of 1D g- C3 N4 enables effective and thermally stable HTL-free carbon-based perovskite solar cells with aging for 100 hours International Journal of Energy Research WOS 0363-907X 4.672
241 July 2022 CO2 DTEE 13611
13605
Dr. VIJAYALAKSHMI S
Dr.J. RANJITHA
Sivaraman C., Vijayalakshmi S., Leonard E., Sagadevan S., Jambulingam R. Current Developments in the Effective Removal of Environmental Pollutants through Photocatalytic Degradation Using Nanomaterials Catalysts WOS 2073-4344 4.501
242 July 2022 SMEC DME 14802 Dr. JAYAKRISHNA K Arumugam S., Kandasamy J., Thiyaku T., Saxena P. Effect of Low Concentration of SiO2 Nanoparticles on Grape Seed Essential Oil/PBAT Composite Films for Sustainable Food Packaging Application Sustainability (Switzerland) WOS 2071-1050 3.889
243 July 2022 SMEC DTM 14431 Dr. SURAJ KUSHE SHEKHAR Shekhar S.K. Social Marketing Plan to Decrease the COVID-19 Vaccine Hesitancy among Senior Citizens in Rural India Sustainability (Switzerland) WOS 2071-1050 3.889
244 July 2022 SMEC DME 15757 Dr. SENTHIL KUMARAN S Chadha U., Bhardwaj P., Selvaraj S.K., Arasu K., Praveena S., Pavan A., Khanna M., Singh P., Singh S., Chakravorty A., Badoni B., Banavoth M., Sonar P., Paramasivam V. Current Trends and Future Perspectives of Nanomaterials in Food Packaging Application Journal of Nanomaterials WOS 1687-4129 3.791
245 July 2022 SMEC DTEE 15272 Dr. SABOOR S Vidhya R., Balakrishnan T., Kumar B.S., Palanisamy R., Panchal H., Angulo-Cabanillas L., Shaik S., Saleh B., Alarifi I.M. An Experimental Study of ZrO2- CeO2Hybrid Nanofluid and Response Surface Methodology for the Prediction of Heat Transfer Performance: The New Correlations Journal of Nanomaterials WOS 1687-4129 3.791
246 July 2022 SMEC DME 14802 Dr. JAYAKRISHNA K Arumugam S., Kandasamy J., Venkatesan S., Murugan R., Narayanan V.L., Sultan M.T.H., Shahar F.S., Shah A.U.M., Khan T., Sebaey T.A. A Review on the Effect of Fabric Reinforcement on Strength Enhancement of Natural Fiber Composites Materials WOS 1996-1944 3.748
247 July 2022 SMEC DDA 14796 Dr. VINOTH JEBARAJ  A Kumar V.P., Jebaraj A.V. Attainment of favorable microstructure for residual stress reduction through high-temperature heat treatment on additive manufactured inconel 718 alloy International Journal of Advanced Manufacturing Technology WOS 0268-3768 3.563
248 July 2022 SMEC DTEE 15729 Dr. PONNUSAMY P Thangapandian E., Palanisamy P. An experimental and numerical study to enhance the thermal characteristics of LA/CuO/Al2O3 nanocomposites as a phase change material for building cooling applications Polymer Composites WOS 1548-0569 3.531
249 July 2022 SMEC DTEE 16170 Dr. GAURAV GUPTA Shejkar S.K., Agrawal B., Agrawal A., Gupta G. Physical, mechanical, and sliding wear behavior of epoxy composites filled with surface modified walnut shell particulate Polymer Composites WOS 1548-0569 3.531
250 July 2022 SMEC DDA 12625
17099
Dr. VASUDEVAN R
Dr. GANAPATHI M
Barathan V., Rajamohan V., Haboussi M., Manickam G. Variable stiffness composite laminated beams - nonlinear free flexural vibration behavior using a sinusoidal based shear flexible structural theory accounting for Poisson's effect International Journal of Non-Linear Mechanics WOS 0020-7462 3.336
251 July 2022 SMEC DTEE 15272 Dr. SABOOR S Senthilkumar P.B., Parthasarathy M., Afzal A., Saleel C.A., Cuce E., Saboor S., Gera T. The influence of exhaust gas recirculation on the characteristics of compression ignition engines powered by tamanu methyl ester International Journal of Low-Carbon Technologies WOS 1748-1325 3.071
252 July 2022 SMEC DME
DDA
15757
11234
14781
Dr. SENTHIL KUMARAN S
Dr. ARIVAZHAGAN  N
Dr. MANIKANDAN  M
Natesh M., Selvaraj S.K., Arivazhagan N., Manikandan M., Tofil S., Radek N., Mistry Y., Sm M. Effect of Silicon Segregation in the Argon Arc Welded Incoloy 20 Superalloy Silicon WOS 1876-9918 2.941
253 July 2022 SMEC DTEE 15272 Dr. SABOOR S Khan O., Khan M.Z., Khan E., Bhatt B.K., Afzal A., Ağbulut Ü., Shaik S. An enhancement in diesel engine performance, combustion, and emission attributes fueled with Eichhornia crassipes oil and copper oxide nanoparticles at different injection pressures Energy Sources, Part A: Recovery, Utilization and Environmental Effects WOS 1556-7036 2.902
254 July 2022 SMEC       Elkaseer A., Charles A., Schneider S., Scholz S.G. Part Tailoring in Metal-Additive Manufacturing: A Step towards Functionally Graded Customized Stainless-Steel Components Using Laser Powder Bed Fusion Applied Sciences (Switzerland) WOS 2076-3417 2.838
255 July 2022 SMEC DDA 13618 Dr. NIRANJANA BEHERA Behera N., Alkassar Y., K. Agarwal V., Pandey R.K. Fluidized dense phase pneumatic conveying: a review Particulate Science and Technology WOS 1548-0046 2.628
256 July 2022 SMEC DTEE 15272 Dr. SABOOR S Huddar V.B., Razak A., Cuce E., Gadwal S., Alwetaishi M., Afzal A., Saleel C.A., Shaik S. Thermal Performance Study of Solar Air Dryers for Cashew Kernel: A Comparative Analysis and Modelling Using Response Surface Methodology (RSM) and Artificial Neural Network (ANN) International Journal of Photoenergy WOS 1687-529X 2.535
257 July 2022 SMEC DTM 16380 Dr. VINCENT HERALD WILSON Prabhu S.V., Wilson V.H., Anand K.T., Jose S., Sivamani S., Gomadurai C., Kifetew M. Water Absorption Behavior of Teff (Eragrostis tef) Straw Fiber-Reinforced Epoxy Composite: RSM-Based Statistical Modeling and Kinetic Analysis Advances in Polymer Technology WOS 0730-6679 2.502
258 July 2022 ARC DAE 10693 Dr. RAMESH KUMAR  C Shindalkar S.S., Humbe S.S., Joshi G.M., Kumar C.R. Engineering properties of Teflon derived blends and composites: a review Polymer-Plastics Technology and Materials WOS 2574-089X 2.439
259 July 2022 SMEC DDA 14769 Dr. RAMAKRISHNAN  R Kumar M., Ramakrishnan R. Effect of Fused Filament Fabrication Parameters and Tetrabromobisphenol- A/Microcrystalline Cellulose Additives on the Dynamic Mechanical Behavior of Polycarbonate/Acrylonitrile–Butadiene– Styrene Blends for Precision Structures Journal of Materials Engineering and Performance WOS 1059-9495 2.036
260 July 2022 SMEC DME 16173 Dr. RANJEET KUMAR Bagewadi S.S., Sugavaneswaran M., Bhagchandani R.K. Investigation on Mechanical Properties of Additive Manufactured Hybrid Auxetic Structure Journal of Materials Engineering and Performance WOS 1059-9495 2.036
261 July 2022 SMEC DME 15757 Dr. SENTHIL KUMARAN S Chadha U., Selvaraj S.K., Raj A., Mahanth T., Praveen Vignesh S.T., Lakshmi P.J., Samhitha K., Reddy N.B., Adefris A. AI-driven techniques for controlling the metal melting production: A review, processes, enabling technologies, solutions, and research challenges Materials Research Express WOS 2053-1591 2.025
262 July 2022 SMEC DTEE 16356 Dr. NISHANT TIWARI Singh S.K., Verma S.K., Kumar R., Sharma A., Singh R., Tiwari N. Experimental analysis of latent heat thermal energy storage system using encapsulated multiple phase-change materials Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering WOS 2041-3009 1.822
263 July 2022 SMEC DTEE 13386
13385
Dr. ASOKAN M A
Dr. SENTHUR PRABU  S
Asokan M.A., Prabu S.S. Effect of n-butanol on cotton seed oil biodiesel: an approach for improving the emission behavior of DI diesel engine Petroleum Science and Technology WOS 1091-6466 1.695
264 July 2022 SMEC DME 14836 Dr. JOHN RAJAN  A Raja S., Rajan A.J. A Decision-Making Model for Selection of the Suitable FDM Machine Using Fuzzy TOPSIS Mathematical Problems in Engineering WOS 1024-123X 1.430
265 July 2022 SMEC DTEE 15729 Dr. PONNUSAMY P Moulika G., Ponnusamy P. 3D printing for ceramic based PLA composites: Development, security, potential and challenges Journal of Ceramic Processing Research WOS 1229-9162 0.636
266 July 2022 SMEC DDA 11475 Dr. GIRIRAJ M Thirumalai R., Karthick S., Giriraj M. Microstructural analysis and optimization of welding parameters for AA1100 welded plates Journal of Ceramic Processing Research WOS 1229-9162 0.636
267 July 2022 SMEC DDA 11475 Dr.GIRIRAJ M Senthilkumar K.M., Sivakumar A., Shivaji R.M., Tamang S.K., Giriraj M. Optimization of stir casting process parameter using response surface methodology Journal of Ceramic Processing Research WOS 1229-9162 0.636
268 July 2022 SMEC DDA 15190 Dr. SOVAN SUNDAR DASGUPTA Sundar Dasgupta S. Dynamics of a Non-Ideal Gyroscopic Rotor System with Translational- Rotational Coupling Effect of External and Internal Damping Mechanics of Solids WOS 1934-7936 0.549
269 July 2022 SMEC DME 15757 Dr. SENTHIL KUMARAN S Srivastava D., Chadha U., Gunreddy N., Saini N.K., Matara N.N., Machindar O., Mishra U.V., Khanna M., Ram Kishore S., Selvaraj S.K. A brief review on the Tube-to-Tube plate welding process Materials Today: Proceedings SCOPUS 2214-7853 -
270 July 2022 SMEC DTEE 13385 Dr. SENTHUR PRABU  S Kalipada Sau S., George Pulinat K., Noel Moss P., Ranjeet P., Senthur Prabu S. A comparative study on the thermal and dynamic analysis of a disc brake using Ansys Materials Today: Proceedings SCOPUS 2214-7853 -
271 July 2022 SMEC DTEE 12246 Dr. EDISON GUNDABATTINI  Sharma D., Sood A.K., Darius P.S.H., Gundabattini E., Darius Gnanaraj S., Joseph Jeyapaul A. A Study on the Online-Offline and Blended Learning Methods Journal of The Institution of Engineers (India): Series B SCOPUS 2250-2106 -
272 July 2022 SMEC DDA 12481 Dr. DENIS ASHOK  S Moganam P.K., Sathia Seelan D.A. Deep learning and machine learning neural network approaches for multi class leather texture defect classification and segmentation Journal of Leather Science and Engineering SCOPUS 2524-7859 -
273 July 2022 SMEC DME 16099 Dr. SUDHAKARA PANDIAN R Velmurugan K., Saravanasankar S., Venkumar P., Sudhakarapandian R., Bona G.D. Hybrid fuzzy AHP-TOPSIS framework on human error factor analysis: Implications to developing optimal maintenance management system in the SMEs Sustainable Futures SCOPUS 2666-1888 -
274 July 2022 SMEC DDA 11149 Dr. MANOHARAN  R Purbey A., Selvaraj R., Ramamoorthy M. Impact response of a partially filled fuel tank subjected to high-velocity projectiles Australian Journal of Mechanical Engineering SCOPUS 1448-4846 -
275 July 2022 SMEC DDA 16346 Dr. GUNJI BALA MURALI Murali G.B., Deepak B.B.V.L., Bahubalendruni M.V.A.R. Integrated Design for Assembly Approach for Optimal Reduced Levels of Assembly Sequence Generation using Enhanced Fruit Fly Algorithm International Journal of Performability Engineering SCOPUS 0973-1318 -
276 July 2022 SMEC DTEE 13385 Dr. SENTHUR PRABU  S Mugilan M., Devendra K.S., Danish M., Senthur Prabu S. Investigation on thermal analysis of disc brake using Autodesk Fusion 360 Materials Today: Proceedings SCOPUS 2214-7853 -
277 July 2022 SMEC DME 15259 Dr. MURALIDHARAN B Rajeshkannan R., Muralidharan B., Pandi Rajasabai S., Naveenkumar R. Mechanical and thermomechanical characterization of Ni50-x Ti50Cux(x = 2, 5, 10at%) with morphological studies Materials Today: Proceedings SCOPUS 2214-7853 -
278 July 2022 SMEC DAE 12449 Dr. THUNDIL KARUPPA RAJ  R Ravi D., Rajagopal T.K.R. Numerical Investigation on the Effect of Geometric Shape and Outlet Angle of a Bladeless Fan for Flow Optimization using CFD Techniques International Journal of Thermofluids SCOPUS 2666-2027 -
279 July 2022 SMEC DDA 11475 Dr. GIRIRAJ M S.B.V.J. C., Mannayee G. Structural analysis and simulation of solid microneedle array for vaccine delivery applications Materials Today: Proceedings SCOPUS 2214-7853 -
280 July 2022 SMEC DAE 14475
13339
Dr.  KANNAN  C
Dr.  ASHOK  B
Ashok B., Kannan C., Usman K.M., Vignesh R., Deepak C., Ramesh R., Narendhra T.M.V., Kavitha C. Transition to Electric Mobility in India: Barriers Exploration and Pathways to Powertrain Shift through MCDM Approach Journal of The Institution of Engineers (India): Series C SCOPUS 2250-0545 -
281 July 2022 SMEC DAE 13976 Dr. GOVINDHA RASU  N Raghavulu K.V., Rasu N.G., Jani S.P. Tribology analysis and the effect of molybdenum disulphide lubricant additive on the performance of VCR system Advances in Materials and Processing Technologies SCOPUS 2374068X -
282 July 2022 CIMR DDA 14789 Dr. ARIVARASU M P R., M A. Hot corrosion and air oxidation behavior of pulsed current gas tungsten arc welded and CO2 laser beam welded SMO 254 at 800 °C Welding International SCOPUS 0950-7116 -
283 August 2022 SMEC DAE 13339 Dr.  ASHOK  B Oliveira C.Y.B., Jacob A., Nader C., Oliveira C.D.L., Matos Â.P., Araújo E.S., Shabnam N., Ashok B., Gálvez A.O. An overview on microalgae as renewable resources for meeting sustainable development goals Journal of Environmental Management WOS 0301-4797 8.910
284 August 2022 SMEC DTEE 15272 Dr. SABOOR S Shaik S., Maduru V.R., Kirankumar G., Arıcı M., Ghosh A., Kontoleon K.J., Afzal A. Space-age energy saving, carbon emission mitigation and color rendering perspective of architectural antique stained glass windows Energy WOS 1873-6785 8.857
285 August 2022 SMEC DTEE 15272 Dr. SABOOR S Viswanathan V.K., Kaladgi A.R., Thomai P., Ağbulut Ü., Alwetaishi M., Said Z., Shaik S., Afzal A. Hybrid optimization and modelling of CI engine performance and emission characteristics of novel hybrid biodiesel blends Renewable Energy WOS 0960-1481 8.634
286 August 2022 SMEC DAE 13339 Dr. ASHOK  B Jacob A., Ashok B., Shanthakumar S., Jino L., Karthikeyan A., Kavvampally R., Raja I. Formulation of optimal bioenergy mixtures from phototrophic and heterotrophic cultures of S. quadricauda and C. pyrenoidosa microalgal strains Renewable Energy WOS 0960-1481 8.634
287 August 2022 SMEC DTEE
DTEE
16349
16371
Dr. SAKTHIVADIVEL D
Dr. BALAJI K
Ganesh Kumar P., Vigneswaran V.S., Balaji K., Vinothkumar S., Prabakaran R., Sakthivadivel D., Meikandan M., Kim S.C. Augmented v-corrugated absorber plate using shot-blasting for solar air heater – Energy, Exergy, Economic, and Environmental (4E) analysis Process Safety and Environmental Protection WOS 1744-3598 7.926
288 August 2022 SMEC DME 15792 Dr. AHANKARI SANDEEP SURESHRAO Nithin Mithra S., Ahankari S.S. Nanocellulose-based membranes for CO2 separation from biogas through the facilitated transport mechanism: a review Materials Today Sustainability WOS 2589-2347 7.244
289 August 2022 SMEC DME 15262 Dr. ARAVIND RAJ S Choudhary M., Sharma A., Raj S.A., Sultan M.T.H., Hui D., Md Shah A.U. Contemporary review on carbon nanotube (CNT) composites and their impact on multifarious applications Nanotechnology Reviews WOS 2191-9097 6.739
290 August 2022 SMEC DDA
DDA
17039
14792
Dr. ASHIRBAD SWAIN
Dr. BENEDICT THOMAS
Soni S.K., Thomas B., Swain A., Roy T. Functionally graded carbon nanotubes reinforced composite structures: An extensive review Composite Structures WOS 0263-8223 6.603
291 August 2022 SMEC DME 11152 Dr. K. DEVENDRANATH RAMKUMAR Chandrasekar V., Ramkumar K.D. Effect of Nb-free consumables on the microstructure and structural integrity of pressure vessel grades of dissimilar austenitic stainless steel welded joints Journal of Materials Research and Technology WOS 2238-7854 6.267
292 August 2022 SMEC DDA 14781 Dr. MANIKANDAN M Nagarajan B.M., Manoharan M. Influence of cooling conditions on tensile lap shear strength and microstructure of friction stir welded aluminum alloy 5052- H32 and polycarbonate light weight hybrid joint Journal of Manufacturing Processes WOS 1526-6125 5.684
293 August 2022 SMEC DME 15757 Dr. SENTHILKUMARAN S Sachdeva I., Ramesh S., Chadha U., Punugoti H., Selvaraj S.K. Computational AI models in VAT photopolymerization: a review, current trends, open issues, and future opportunities Neural Computing and Applications WOS 1433-3058 5.102
294 August 2022 SMEC DTEE 17043 Dr. DEEPAKKUMAR R Ramalingam S., Dharmalingam B., Deepakkumar R., Sriariyanun M. Effect of Moringa oleifera biodiesel– diesel–carbon black water emulsion blends in diesel engine characteristics Energy Reports WOS 2352-4847 4.937
295 August 2022 CBCMT DME 16164 Dr. SUYA PREM ANAND P C U.N., P S.P.A. Selective laser melting and post- processing stages for enhancing the material behavior of cobalt-chromium alloy in total hip replacement: a review Materials and Manufacturing Processes WOS 1042-6914 4.783
296 August 2022 SMEC DTEE 15272 Dr. SABOOR S Afzal A., Alahmadi A.A., Abdul Razak R.K., Alwetaishi M., Alzaed A.N., Shaik S. Machine learning prediction and study of hotspots and hotspots location for sustainable battery energy system International Journal of Energy Research WOS 0363-907X 4.672
297 August 2022 SMEC DDA 14792 Dr. BENEDICT THOMAS Joshi K.K., Kar V.R., Thomas B. Higher-order finite element solution of graphene platelets reinforced nanocomposite curved panels with uniform/non-uniform porosity Mechanics Based Design of Structures and Machines WOS 1539-7734 4.364
298 August 2022 SMEC DDA 11551 Dr. VELU M Saju T., Velu M. Fracture toughness and fatigue crack growth rate studies on rotary friction weldments of nickel-based superalloys Materials Letters WOS 0167-577X 3.574
299 August 2022 SMEC DTEE
DDA
DME
DME
14032
14781
11234
14868
Dr. BIBIN JOHN
Dr. MANIKANDAN M
Dr. ARIVAZHAGAN N
Dr. NAGESWARA RAO M
Jose B., Manoharan M., Natarajan A., Rao Muktinutalapati N., Madhusudhan Reddy G. Development of a low heat-input welding technique for joining thick plates of 250 grade maraging steel to fabricate rocket motor casings Materials Letters WOS 0167-577X 3.574
300 August 2022 SMEC DDA 14781 Dr. MANIKANDAN M Anandan B., Manikandan M. Machine learning approach for predicting the peak temperature of dissimilar AA7050-AA2014A friction stir welding butt joint using various regression models Materials Letters WOS 0167-577X 3.574
301 August 2022 SMEC DME 15262 Dr. ARAVIND RAJ S Madhavadas V., Srivastava D., Chadha U., Aravind Raj S., Sultan M.T.H., Shahar F.S., Shah A.U.M. A review on metal additive manufacturing for intricately shaped aerospace components CIRP Journal of Manufacturing Science and Technology WOS 1755-5817 3.560
302 August 2022 SMEC DDA
DDA
14828
12625
Dr. EDWIN SUDHAGAR P
Dr. VASUDEVAN R
Arumugam A.B., Rajendra C.O., Edwin Sudhagar P., Rajamohan V., Kumbhar S.G., Perumal A. Thermal buckling analysis of tapered laminated composite beam: Numerical and experimental investigation Polymer Composites WOS 1548-0569 3.531
303 August 2022 SMEC DTEE
DDA
12246
15283
Dr. GUNDABATTINI EDISON
Dr. DARIUS GNANARAJ S
Greco A., Gundabattini E., Solomon D.G., Singh Rassiah R., Masselli C. A Review on Geothermal Renewable Energy Systems for Eco-Friendly Air- Conditioning Energies WOS 1996-1073 3.252
304 August 2022 SMEC DTEE
DDA
12246
15283
Dr. GUNDABATTINI EDISON
Dr. DARIUS GNANARAJ S
Boopathi N.G., Muthuraman M.S., Palka R., Wardach M., Prajzendanc P., Gundabattini E., Rassiah R.S., Solomon D.G. Modeling and Simulation of Electric Motors Using Lightweight Materials Energies WOS 1996-1073 3.252
305 August 2022 SMEC DAE 13339 Dr. ASHOK B Ashok B., Kannan C., Mason B., Ashok S.D., Indragandhi V., Patel D., Wagh A.S., Jain A., Kavitha C. Towards Safer and Smarter Design for Lithium-Ion-Battery-Powered Electric Vehicles: A Comprehensive Review on Control Strategy Architecture of Battery Management System Energies WOS 1996-1073 3.252
306 August 2022 SMEC DTEE T0336 Dr. SATYAJIT GHOSH Ghosh S., Sathish Kumar C.R., Gumber S., Dobbie S., Yang H. How Asian slum emissions impact local microclimates in polluted air masses Atmospheric Science Letters WOS 1530-261X 2.992
307 August 2022 SMEC DDA 13614 Dr. ARUN TOM MATHEW Narayanan V.L., Mathew A.T. Experimental investigation on load mitigation of a 5 MW wind turbine in digital fluid power pitch system test rig based on predictive load mitigation controller Energy Sources, Part A: Recovery, Utilization and Environmental Effects WOS 1556-7230 2.902
308 August 2022 SMEC DTEE 15272 Dr. SABOOR S Das P.K., Dash S.K., Ganguly R., Santra A.K., Venkatesan E.P., Rajhi A.A., Shaik S., Afzal A. Effect of particle loading and temperature on the rheological behavior of Al2O3 and TiO2 nanofluids Energy Sources, Part A: Recovery, Utilization and Environmental Effects WOS 1556-7230 2.902
309 August 2022 SMEC DME 13140 Dr. DEGA NAGARAJU Trivedi P., Vansjalia R., Erra S., Narayanan S., Nagaraju D. A Fuzzy CRITIC and Fuzzy WASPAS-Based Integrated Approach for Wire Arc Additive Manufacturing (WAAM) Technique Selection Arabian Journal for Science and Engineering WOS 2191-4281 2.807
310 August 2022 SMEC DAE 10397 Dr. YAGNA S MUKKAMALA Mukkamala Y., Dirker J. Heat Transfer in Multiport Minichannel Condensers and Evaporators: Correlation Development and Meta-Analysis Heat Transfer Engineering WOS 1521-0537 2.431
311 August 2022 SMEC DTEE 12246 Dr. GUNDABATTINI EDISON Vemanaboina H., Ferro P., Babu B.S.,
Gundabattini E., Kumar K., Berto F.
Residual Stress Distribution in Selective Laser Melting of SS316L Parts Advances in Materials Science and Engineering WOS 1687-8434 2.098
312 August 2022 SMEC DTM
DTEE
DME
DME
DTM
16380
15729
 15757
 14836
15850
Dr. VINCENT HERALD WILSON
Dr. PONNUSAMY P
Dr. SENTHIL KUMARAN S
Dr. JOHN RAJAN A
Dr. JOSE.S
Krishnaraja A.R., Kulanthaivel P., Ramshankar P., Wilson V.H., Palanisamy P., Vivek S., Sampathkumar V., Ganeshan P., Sashikkumar M.C., Raja K., Selvaraj S.K., John Rajan A., Jose S. Performance of Polyvinyl Alcohol and Polypropylene Fibers under Simulated Cementitious Composites Pore Solution Advances in Materials Science and Engineering WOS 1687-8434 2.098
313 August 2022 SMEC DME 12475 Dr. RAJYALAKSHMI G Bezawada S., Gajjela R. Microstructural and Mechanical Characterization of Welded Joints between Stainless Steel and Hastelloy Made Using Pulsed Current Gas Tungsten Arc Welding Journal of Materials Engineering and Performance WOS 1059-9495 2.036
314 August 2022 CIMR DDA 14789 Dr. ARIVARASU M Muthu S.M., Arivarasu M. Improvements in Hot Corrosion Behavior of CO2 Laser-Welded Fe-Based A-286 Alloy in an Aggressive Salt Environment by High-Velocity Oxy-Fuel Coating Journal of Materials Engineering and Performance WOS 1059-9495 2.036
315 August 2022 SMEC DME
DTM
DTEE
15757
15850
15729
Dr. SENTHIL KUMARAN S
Dr. JOSE.S
Dr. PONNUSAMY P
Vivek S.S., Karthikeyan B., Kanna G.R., Selvaraj S.K., Jose S., Palanisamy P., Adane T.M. Study on Fresh and Mechanical Properties of Polyblend Self-Compacting Concrete with Metakaolin, Lightweight Expanded Clay Aggregate, and SAP as Alternative Resources Advances in Civil Engineering WOS 1687-8086 1.843
316 August 2022 SMEC DME
DDA
11234
14781
Dr. ARIVAZHAGAN N
Dr. MANIKANDAN M
Sreenivasulu V., Subramani P., Jayakumar V., Mageshkumar K., Arivazhagan N., Manikandan M., Tofil S., Sathishkumar M. Development of protective coating for X8CrNiMoVNb16-13 alloy in high- temperature molten salt environment through high-velocity oxy-fuel sprayed NiCrMoNb and Cr3C2-25NiCr powder coating Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering WOS 2041-3009 1.822
317 August 2022 SMEC DTEE 17043 Dr. DEEPAKKUMAR R Palani K.C., Rajagopal D. Numerical modelling of dry-out in pulsating heat pipe using VOF model Journal of Mechanical Science and Technology WOS 1738-494X 1.810
318 August 2022 SMEC DME 14868
10597
Dr. NAGESWARA RAO M
Dr. GEETHA MANIVASAGAM
Kirthika A.M.A., Rao M.N., Manivasagam G. Duplex aging of metastable beta titanium alloys: A Review Transactions of the Indian Institute of Metals WOS 0975-1645 1.391
319 August 2022 SMEC DDA 14796 Dr. VINOTH JEBARAJ A Praveen Kumar D., Vinoth Jebaraj A. Role of Volumetric Energy Density and Post-Heat Treatments to Achieve Stable Microstructure on Additive Manufactured Ti6Al4V Alloy Transactions of the Indian Institute of Metals WOS 0975-1645 1.391
320 August 2022 SMEC DAE
DME
DME
DAE
15780
15744
15259
13304
Dr. PRABU K
Dr. RAJAMURUGAN G
Dr. MURALIDHARAN B
Dr. RAVI K
Krishnasamy P., Geetha M., Rajamurugan G., Muralidharan B., Krishnaiah R. DRILLING PARAMETRIC ANALYSIS OF PERFORATED COPPER FOIL ON HEMP/SISAL FIBER COMPOSITE USING SEQUENTIAL ANN Surface Review and Letters WOS 0218625X 1.240
321 August 2022 SMEC DTEE 16170 Dr. GAURAV GUPTA Singh S., Verma S., Kumar R., Gupta G., Pati P.R., Sharma A. Thermal Performance Enhancement of CuO-Paraffin Nano-Enhanced Phase Change Material International Journal of Vehicle Structures and Systems SCOPUS 0975-3060 -
322 August 2022 SMEC DTM 14431 Dr. SURAJ KUSHE SHEKHAR Shekhar S.K. Kindergarten Geography Classrooms: The Way Forward Amid COVID-19 Geography Teacher SCOPUS 1752-6884 -
323 August 2022 SMEC DDA 12507 Dr. AKASH MOHANTY George M., Pratheesh K., Mohanty A., Suresh N., Varghese T., Sunny R., Narayanan S. Thermal and magnetic properties study of NiCo2O4/graphene and NiFe2O4/graphene Materials Today: Proceedings SCOPUS 2214-7853 -
324 August 2022 SMEC DTEE 17043 Dr. DEEPAKKUMAR R Dharmalingam B., Deepakkumar R., Bhattacharya K., Paulraj Gundupalli M., Sriariyanun M. Prediction of split injection strategy assisted diesel engine combustion, performance and emission characteristics fuelled waste frying oil methyl ester through central composite design Materials Today: Proceedings SCOPUS 2214-7853 -
325 August 2022 SMEC DDA 13595 M r. BOOPATHI M Ainapure B.S., Boopathi M., Kolli C.S., Jackulin C. Deep Ensemble Model for Spam Classification in Twitter via Sentiment Extraction: Bio-Inspiration-Based Classification Model International Journal of Image and Graphics SCOPUS 0219-4678 -
326 August 2022 SMEC DTEE 17043 Dr. DEEPAKKUMAR R Nishidh N.B., Deepakkumar R. Numerical investigation of suction and blowing effects on fluid flow and heat transfer characteristics of solar air heater Materials Today: Proceedings SCOPUS 2214-7853 -
327 September 2022 SMEC DTEE 15272 Dr. SABOOR S Shaik S., Arumugam C., Shaik S.V., Arıcı M., Afzal A., Ma Z. Strategic design of PCM integrated burnt clay bricks: Potential for cost-cutting measures for air conditioning and carbon dioxide extenuation Journal of Cleaner Production WOS 0959-6526 11.072
328 September 2022 SMEC DME 15792 Dr. AHANKARI SANDEEP SURESHRAO Nargatti K.I., Subhedar A.R., Ahankari S.S., Grace A.N., Dufresne A. Nanocellulose-based aerogel electrodes for supercapacitors: A review Carbohydrate Polymers WOS 0144-8617 10.723
329 September 2022 SMEC DTEE 15272 Dr. SABOOR S Rajak U., Subhaschandra Singh T., Nath Verma T., Kumar Chaurasiya P., Shaik S., Afzal A., Cuce E., Rajhi A.A., Ahamed Saleel C. Experimental and parametric studies on the effect of waste cooking oil methyl ester with diesel fuel in compression ignition engine Sustainable Energy Technologies and Assessments WOS 2213-1388 7.632
330 September 2022 SMEC DTEE 15272 Dr. SABOOR S Mert Cuce P., Cuce E., Guclu T., Shaik S., Alshahrani S., Ahamed Saleel C. Effect of using hybrid nanofluids as a coolant on the thermal performance of portable thermoelectric refrigerators Sustainable Energy Technologies and Assessments WOS 2213-1388 7.632
331 September 2022 SMEC DDA 17099
12625
Dr. GANAPATHI M
Dr. VASUDEVAN R
Manickam G., Rajamohan V., Gunasekaran V., Pitchaimani J., Mohamed H. Nonlinear flutter of 2D variable stiffness curvilinear fibers composite laminates by a higher-order shear flexible beam theory with Poisson's effect Composite Structures WOS 0263-8223 6.603
332 September 2022 SMEC DME 10223 Dr. ANTHONY XAVIOR  M Natarajan S.P., Vaudreuil S., Chibane H., Morandeau A., Xavior M.A., Cormier J., Leroy R., Duchosal A. Influence of heat treatment on the tool life while machining SLM Inconel 718 with reference to C&W Inconel 718 Journal of Manufacturing Processes WOS 1526-6125 5.684
333 September 2022 ARC DAE 14463 Dr. THANGARAJA J Devarajan Y., Munuswamy D.B., Subbiah G., Vellaiyan S., Nagappan B., Varuvel E.G., Thangaraja J. Inedible oil feedstocks for biodiesel production: A review of production technologies and physicochemical properties Sustainable Chemistry and Pharmacy WOS 2352-5541 5.464
334 September 2022 SMEC DTEE 15272 Dr. SABOOR S Panchal H., Sohani A., Van Nguyen N., Shoeibi S., Khiadani M., Huy P.Q., Hoseinzadeh S., Kabeel A.E., Shaik S., Cuce E. Performance evaluation of using evacuated tubes solar collector, perforated fins, and pebbles in a solar still – experimental study and CO2 mitigation analysis Environmental Science and Pollution Research WOS 1614-7499 5.190
335 September 2022 SMEC DME 15262
14802
Dr. ARAVIND RAJ S
Dr. JAYAKRISHNA  K
Hameed A.Z., Aravind Raj S., Kandasamy J., Shahzad M.A., Baghdadi M.A. 3D Printing Parameter Optimization Using Taguchi Approach to Examine Acrylonitrile Styrene Acrylate (ASA) Mechanical Properties Polymers WOS 2073-4360 4.967
336 September 2022 SMEC DDA 17046 Dr. NAVEEN J Balakrishnan T.S., Sultan M.T.H., Naveen J., Shahar F.S., Najeeb M.I., Shah A.U.M., Khan T., Sebaey T.A. Selection of Natural Fibre for Pultruded Hybrid Synthetic/Natural Fibre Reinforced Polymer Composites Using Analytical Hierarchy Process for Structural Applications Polymers WOS 2073-4360 4.967
337 September 2022 SMEC DDA 17046 Dr. NAVEEN J Loganathan T.M., Sultan M.T.H., Ahsan Q., Jawaid M., Naveen J., Shah A.U.M., Talib A.R.A., Basri A.A. Thermal degradation, visco-elastic and fire- retardant behavior of hybrid Cyrtostachys Renda/kenaf fiber-reinforced MWCNT- modified phenolic composites Journal of Thermal Analysis and Calorimetry WOS 1388-6150 4.755
338 September 2022 SMEC DTEE 16343 Dr. ABINASH MOHANTA Rathor S.K., Mohanta A., Patra K.C. Validation of Computational Fluid Dynamics Approach of Lateral Velocity Profile Due to Curvature Effect on Floodplain Levee of Two- stage Meandering Channel Water Resources Management WOS 0920-4741 4.426
339 September 2022 SMEC DTEE 15272 Dr. SABOOR S Cuce P.M., Cuce E., Alshahrani S., Saboor S., Sen H., Veza I., Saleel C.A. Performance Evaluation of Solar Chimney Power Plants with Bayburt Stone and Basalt on the Ground as Natural Energy Storage Material pollutants Sustainability (Switzerland) WOS 2071-1050 3.889
340 September 2022 SMEC DME 13331
10223
13612
Dr. JOEL  J
Dr. ANTHONY XAVIOR  M
Dr. JEYAPANDIARAJAN  P
Jayaseelan J., Pazhani A., Michael A.X., Paulchamy J., Batako A., Hosamane Guruswamy P.K. Characterization Studies on Graphene- Aluminium Nano Composites for Aerospace Launch Vehicle External Fuel Tank Structural Application Materials WOS 1996-1944 3.748
341 September 2022 SMEC DME 15744 Dr. RAJAMURUGAN G Uday K.N., Rajamurugan G. Dhaou I.B. Influence of tool rotational and transverse speed on friction stir welding of dissimilar aluminum 6061 composites Materials Letters WOS 0167-577X 3.574
342 September 2022 SMEC DDA 12625 Dr. VASUDEVAN R Barathan V., Rajamohan V. Nonlinear buckling analysis of a sandwich composite semi-ellipsoidal shell under hydrostatic pressure: A numerical and experimental investigation Mechanics of Advanced Materials and Structures WOS 1537-6532 3.338
343 September 2022 SMEC DTM 16380 Dr. D VINCENT HERALD WILSON Thakur P., Wilson V.H. Analysis of barriers affecting the adoption of community solar from consumer's perspective: A hybrid ISM-DEMATEL approach  Energy and Environment WOS 0958-305X 3.154
344 September 2022 SMEC DDA
DME
13644
12334
Dr. SHARAN CHANDRAN  M
Dr. PADMANABHAN  K
Chandran Maniyamparambil S., Vadivel G.K., Krishnan P. Experimental and numerical damage analysis of low-velocity drop weight impact of polyethylene self-reinforced composite laminates for transportation applications a Vertical Plate with Radiation Journal of Thermoplastic Composite Materials WOS 1530-7980 3.027
345 September 2022 SMEC DTEE 16371 Dr. BALAJI K Chandrashekar R., Kumar B. Experimental investigation on energy saving potential for thermally activated buildings integrated with the active cooling system Energy Sources, Part A: Recovery, Utilization and Environmental Effects WOS 1556-7230 2.902
346 September 2022 SMEC DAE 14475 Dr. KANNAN  C Rajasozhaperumal G., Kannan C. Influence of Fatty Acid Composition on the Tribological Performance of Methyl Esters Under Boundary Lubrication Regime Arabian Journal for Science and Engineering WOS 2191-4281 2.807
347 September 2022 SMEC DME 13576 Dr. NARENDRA KUMAR  U Somasundaram M., NarendraKumar U. Microstructural and Mechanical Properties of a Heat-Treated EV31A Magnesium Alloy Fabricated Using the Stir-Casting Process Crystals WOS 2073-4352 2.670
348 September 2022 SMEC DDA 13097 Dr. VENKATESAN  S Abraham A.M., Venkatesan S. A review on application of biomaterials for medical and dental implants Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications WOS 2041-3076 2.663
349 September 2022 SMEC DME 11819 Dr. VEZHAVENDHAN  R Ganesamoorthy R., Suresh G., Padmavathi K.R., Rajaparthiban J., Vezhavendhan R., Bharathiraja G. Experimental Analysis and Mechanical Properties of Fly-ash Loaded E-Glass Fiber Reinforced IPN (Vinylester/polyurethane) Composite Fibers and Polymers WOS 1229-9197 2.347
350 September 2022 SMEC DME 15757
12941
Dr. SENTHIL KUMARAN S
Dr. SUNDARAMALI  G
Jithin S D., Selvaraj S.K., Vijay Vishaal K.E., Sundaramali G. Comparative Analysis between 5thand 6thGeneration Superalloys and Previous Generation Superalloys Advances in Materials Science and Engineering WOS 1687-8442 2.098
351 September 2022 SMEC DTEE
DME
13385
11152
11234
Dr. SENTHUR PRABU  S
Dr. DEVENDRANATH RAMKUMAR  K
Dr. ARIVAZHAGAN N
Prabu S.S., Sujai S., Prathiba S., Ramkumar K.D., Arivazhagan N. Microstructural and mechanical characterization of pre-used SA 335 P91 super-heater pipe weldment used in 70 MW CFBC boilers Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering WOS 0954-4089 1.822
352 September 2022 SMEC DME 14836 Dr. JOHN RAJAN  A Raja S., John Rajan A., Praveen Kumar V., Rajeswari N., Girija M., Modak S., Vinoth Kumar R., Mammo W.D. Selection of Additive Manufacturing Machine Using Analytical Hierarchy Process Scientific Programming WOS 1875-919X 1.672
353 September 2022 SMEC DME 12476 Dr. SRINIVASA GUPTA  N Sowmiya N., Gupta N.S., Natarajan E., Valarmathi B., Elamvazuthi I., Parasuraman S., Kit C.A., Freitas L.I., Abraham Gnanamuthu E.M. COIN: Correlation Index-Based Similarity Measure for Clustering Categorical Data Mathematical Problems in Engineering WOS 1024-123X 1.430
354 September 2022 SMEC DAE 15780 Dr. PRABU K Thangamani J., Krishnasamy P. Coated Natural Fiber Reinforced Hybrid Composite: Mechanical, Thermal, and Acoustic Performances Transactions of the Indian Institute of Metals WOS 0972-2815 1.391
355 September 2022 SMEC DME 11151 Dr. SENTHIL KUMAR  S Rajasekharan Unnithan A.R., Subramaniam S. Enhancing Ride Comfort and Stability of a Large Van Using an Improved Semi-active Stability Augmentation System SAE International Journal of Vehicle Dynamics, Stability, and NVH SCOPUS 2380-2170 -
356 September 2022 SMEC DTEE 16173 Dr. RANJEET KUMAR Bhagchandani R.K., Kamble P., Kapil S., Karunakaran K.P., Ravi B. Rapid casting using alternative approach of pattern and mould making International Journal of Manufacturing Research SCOPUS 1750-0591 -
357 September 2022 SMEC DME 13140
13382
13599
15757
Dr. DEGA NAGARAJU
Dr. SENTHIL KUMARAN S
Dr. CHIRANJEEVI  C
Dr. RAJA SEKHAR  Y
Nagaraju D., Chiranjeevi C., Rajasekhar Y., Selvaraj S.K., Chadha U., Nagalakshmi R., Paramasivam V. Semantic Approach for Evaluation of Energy Storage Technologies under Fuzzy Environment Advances in Fuzzy Systems SCOPUS 1687-7101 -
358 September 2022 SMEC DME 15757 Dr. SENTHIL KUMARAN S Rajendran D., Sasilatha T., Rajendran S., Selvaraj S.K., Lacnjevac C., Prabha S.S., Rathish R.J. Application of machine learning in corrosion inhibition study [PRIMENA MAŠINSKOG UČENJA U PROUČAVANJU INHIBICIJE KOROZIJE] Materials Protection SCOPUS 2466-2585 -
359 September 2022 SMEC DME 15287 Dr. BIBHUTI BHUSAN SAHOO Dabi M., Sahoo B.B., Saha U.K. An exploratory experimental study of a single-cylinder diesel engine run on diesel– Mesua ferrea Linn oil–diethyl ether ternary blends Indian Chemical Engineer SCOPUS 0975-007X -
360 October  2022 SMEC DME 12538 Dr. Soumen Pal Chakraborty C., Bhattacharya M., Sharma A.R., Mohapatra R.K., Chakraborty S., Pal S., Dhama K. Immediate need for next-generation and mutation-proof vaccine to protect against current emerging Omicron sublineages and future SARS-CoV-2 variants: An urgent call for researchers and vaccine companies – Correspondence International Journal of Surgery WOS 1743-9191 13.400
361 October  2022 CO2 DAE 12869
10063
16347
Dr. PORPATHAM E
Dr. SENTHIL KUMAR A
Dr. NATARAJ G
Sasidhar K.B., Somasundaram M., Ekambaram P., Arumugam S.K., Nataraj G., Murugan M.A. A critical review on the effects of pneumatic mixing in anaerobic digestion process Journal of Cleaner Production WOS 0959-6526 11.072
362 October  2022 CBCMT DME 16164 Dr. SUYA PREM ANAND P Raghuram P., S B., Manivannan R., Anand P.S.P., Sreedharan V.R. Modeling and Analyzing the Inventory Level for Demand Uncertainty in the VUCA World: Evidence From Biomedical Manufacturer IEEE Transactions on Engineering Management WOS 0018-9391 8.702
363 October  2022 SMEC DAE 13304 Dr. RAVI K Elumalai R., Ravi K. Strategy to reduce carbon emissions by adopting ammonia–Algal biodiesel in RCCI engine and optimize the fuel concoction using RSM methodology International Journal of Hydrogen Energy WOS 0360-3199 7.139
364 October  2022 SMEC DME 13954 Dr. RAJA ANNAMALAI Gecil Evangeline T., Annamalai A.R., Magdaline T.B. Modern Synthesis and Sintering Techniques of Calcium Copper Titanium Oxide (CaCu3Ti4O12) Ceramics and Its Current Trend in Prospective Applications: A Mini-Review Nanomaterials WOS 2079-4991 5.719
365 October  2022 SMEC DTEE 15272 Dr. SABOOR S Priya A.V., Shaik S. Crystal mud transparent slime as a glazing material for net-zero energy buildings: Enhanced energy savings, diurnal lighting, and CO2 mitigation Energy for Sustainable Development WOS 0973-0826 5.655
366 October  2022 SMEC DDA 16350 Dr. SEENUVASAPERUMAL P Karuppusamy I., Seenuvasaperumal P., Surendiran M., Shanmugam S., Chinnathambi A., Alahmadi T.A., Brindhadevi K., Lan Chi N.T., Pugazhendhi A. Fabrication of near superhydrophobic Pt– TiO2 hybrid nanoflake composite as food sensor in food processing industry Food and Chemical Toxicology WOS 0278-6915 5.572
367 October  2022 SMEC DME 15757 Dr. SENTHIL KUMARAN S Panchigar D., Kar K., Shukla S., Mathew R.M., Chadha U., Selvaraj S.K. Machine learning-based CFD simulations: a review, models, open threats, and future tactics Neural Computing and Applications WOS 0941-0643 5.102
368 October  2022 CO2 DTEE 13605 Dr. RANJITHA J Srinivasan G.R., Jambulingam R., Gacem A., Ahmad A., Bhutto J.K., Yadav K.K., Mezni A., Alharbi O.K.R., Islam S., Ahn Y., Jeon B.-H. Effect of Fuel Preheating on Engine Characteristics of Waste Animal Fat-Oil Biodiesel in Compression Ignition Engine Polymers WOS 2073-4360 4.967
369 October  2022 SMEC DME 15262 Dr. ARAVIND RAJ S Sakthi Balan G., Aravind Raj S. A review on Shock tubes with multitudinous applications International Journal of Impact Engineering WOS 0734-743X 4.592
370 October  2022 CO2 DTEE 17040 Dr. ASHISH ALEX SAM De D.K., Oduniyi I.A., Alex Sam A. A novel cryogenic technology for low-cost carbon capture from NGCC power plants for climate change mitigation Thermal Science and Engineering Progress WOS 2451-9049 4.560
371 October  2022 SMEC DDA 15768 Dr. RENOLD ELSEN S Puthillam U., Ravoor J., Elsen Selvam R., Karuppan D., Bakthavachalam B., Aseer J.R. Physical, mechanical, and biological characterization of robocasted carbon nanotube reinforced microwave sintered calcium phosphate scaffolds for bone tissue engineering Journal of the Mechanical Behavior of Biomedical Materials WOS 1751-6161 4.042
372 October  2022 CIMR DME 13954 Dr. RAJA ANNAMALAI Srikanth M., Annamalai A.R., Muthuchamy A. Medium heavy alloy fabrication with ultrafine grain and high performance via spark plasma sintering Materials Letters WOS 0167-577X 3.574
373 October  2022 SMEC DDA 17046 Dr. NAVEEN J Loganathan T.M., Sultan M.T.H., Muhammad Amir S.M., Naveen J., Shari M.R., Mustapa S., Saharudin M.F., Mohd Rabu I.S.B., Shah A.U.M.,
Mohd S.
Low-Velocity Impact, Free-Fall Drop Test of Prototype, and Failure Analysis of Hybrid Palm / Kenaf Reinforced MWCNT Phenolic Composites Journal of Natural Fibers WOS 1544-0478 3.507
374 October  2022 SMEC DDA 14828 Dr. EDWIN SUDHAGAR P Gunasegeran M., Sudhagar P.E. Evaluation, optimization and prediction of the transverse shear modulus of biomimetic 3D printed sandwich core Mechanics of Advanced Materials and Structures WOS 1537-6494 3.338
375 October  2022 SMEC DDA 10629 Dr. KANISH T.C Vante A.B., Kanish T.C. Experimental investigation on digital offset switching strategy for precise dosing using digital multiple micropump infusion system Microfluidics and Nanofluidics WOS 2411-5134 3.090
376 October  2022 SMEC DME 13576 Dr. NARENDRA KUMAR U Thiyagu C., NarendraKumar U. Effect of graphene on thermal, mechanical, and shape memory properties of polyurethane nanocomposite Applied Physics A: Materials Science and Processing WOS 0947-8396 2.983
377 October  2022 SMEC DME 15744 Dr. RAJAMURUGAN G Singh Q.J., Rajamurugan G. Experimental study on abrasive water jet machining of WCFC reinforced flax/wire mesh/hemp composite Journal of Industrial Textiles WOS 1528-0837 2.926
378 October  2022 SMEC DME 13576 Dr. NARENDRA KUMAR U Somasundaram M., NarendraKumar U. Electrochemical corrosion behaviour of stir cast and heat-treated EV31A magnesium alloy in different electrolytic mediums Journal of Applied Electrochemistry WOS 0021-891X 2.925
379 October  2022 SMEC DTEE 15272 Dr. SABOOR S Dineshkumar C., Jeyakumar P.D., Arvinda Pandian C.K., Rajmohan N., Elumalai P.V., Kamesh N., Shaik S., Sharifpur M., Khalilpoor N. Assessment on Performance and Emission Characteristics of the CRDI Engine Fueled with Ethanol/Diesel Blends in Addition to EGR International Journal of Chemical Engineering WOS 1687-8078 2.729
380 October  2022 SMEC DDA 11551 Dr. VELU M Saju T., Velu M. Experimental studies of fracture and fatigue crack growth in dissimilar metal welded joints of nickel-based superalloys: Cracks oriented along the weld Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications WOS 2041-3076 2.663
381 October  2022 SMEC DTEE 13382 Dr. CHIRANJEEVI C Meena R.S., Singh A., Urhekar S., Rohitbhakar, Garg N.K., Israr M., Kothari D.P., Chiranjeevi C., Srinivasan P. Artificial Intelligence-Based Deep Learning Model for the Performance Enhancement of Photovoltaic Panels in Solar Energy Systems International Journal of Photoenergy WOS 1110-662X 2.535
382 October  2022 SMEC DDA 14792 Dr. BENEDICT THOMAS Chandra S., Amulani A., Thomas S.B., Soni S.K., Thomas B. Influence of CNT volume fractions on static and dynamic behavior of aluminum honeycomb-cored carbon-fiber- reinforced honeycomb sandwich structure Journal of the Brazilian Society of Mechanical Sciences and Engineering WOS 1678-5878 2.361
383 October  2022 SMEC DME 15757 Dr. SENTHIL KUMARAN S Chadha U., Selvaraj S.K., Lamsal A.S., Maddini Y., Ravinuthala A.K., Choudhary B., Mishra A., Padala D., Shashank M., Lahoti V., Adefris A., Dhanalakshmi S. Directed Energy Deposition via Artificial Intelligence-Enabled Approaches Complexity WOS 1076-2787 2.121
384 October  2022 SMEC DME 13970 Dr. VENKATESHWARLU B Kalangi C., Bolleddu V. Influence of Carbon Nanotubes on Enhancement of Sliding Wear Resistance of Plasma-Sprayed Yttria-Stabilised Zirconia Coatings Advances in Materials Science and Engineering WOS 1687-8442 2.098
385 October  2022 SMEC DME 15757 Dr. SENTHIL KUMARAN S Selvaraj S.K., Kaliappan J., Muthuswamy N., Ramesh Kumar S., Cheepu M. Prognostics, Health Assessment, and Modelling of Material Removal Rate by EDM for Al 6061 and AISI 304 via Cockroach Swarm and Fruit Fly Optimization Approaches Advances in Materials Science and Engineering WOS 1687-8442 2.098
386 October  2022 CIMR DDA 14789 Dr. ARIVARASU M Samuel S.C., Arivarasu M., Prabhu T.R. High-Temperature Solid Particle Erosion Behavior of Laser Powder Bed Fused Inconel 718 Journal of Tribology WOS 1528-8897 1.891
387 October  2022 SMEC DME 15757
15850
14836
16380
Dr. SENTHIL KUMARAN S
Dr. JOSE S
Dr. JOHN RAJAN A
Dr. VINCENT HERALD WILSON
Adane T.M., Araya A.A., Karthikeyan B., Selvaraj S.K., Jose S., John Rajan A., Vincent Herald Wilson D. A Novel Technique to Utilize Second Waste of Plastic Bottle as Soil Reinforcement: A Comparative Study on Mechanical Properties with Natural Black Cotton Soil Advances in Civil Engineering WOS 1687-8094 1.843
388 October  2022 SMEC DME
DTM
15757
14836
15850
16380
Dr. SENTHIL KUMARAN S
Dr. JOHN RAJAN A
Dr. JOSE S
Dr. VINCENT HERALD WILSON
Gunarani G.I., Karthikeyan B., Priyadharshini A., Selvaraj S.K., Jose S., Vincent Herald Wilson D., Moges Adane T. Sustainable Concrete Columns with GGBS and Industrial Sand: A Comparative Study on Destructive and Nondestructive Tests on Damaged Columns Strengthened with GFRP Jacketing Advances in Civil Engineering WOS 1687-8094 1.843
389 October  2022 SMEC DME 11234
14868
Dr. ARIVAZHAGAN N
Dr. NAGESWARA RAO M
Venkateshkannan M., Arivazhagan N., Nageswara Rao M., Madhusudhan Reddy G. Characterization of weld joints produced by continuous wave and double pulse gas metal arc welding in naval grade high- strength low-alloy steel Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering WOS 2041-3009 1.822
390 October  2022 SMEC DME 14807 Dr. SAMPATH KUMAR T Bharathi P., Sampath kumar T. Latest research and developments of ceramic reinforced magnesium matrix composites—A comprehensive review Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering WOS 2041-3009 1.822
391 October  2022 SMEC DME 16099 Dr. SUDHAKARA PANDIAN R Velmurugan K., Saravanasankar S., Venkumar P., Sudhakarapandian R., Di Bona G. Availability Analysis of the Critical Production System in SMEs Using the Markov Decision Model Mathematical Problems in Engineering WOS 1026-7077 1.430
392 October  2022 SMEC DME 16099
17048
Dr. SUDHAKARA PANDIAN R
Dr. S.G. PONNAMBALAM
Kumar S.S., Pandian R.S., Pitchipoo P., Senthilkumar T.S., Ponnambalam S.G. Investigation of Wear and Wire Electrical Discharge Machining Characteristics of Al-Mg-MoS2 Composites Using Response Surface Method Journal of Testing and Evaluation WOS 0090-3973 1.333
393 October  2022 SMEC DDA 14461 Dr. MALLIKARJUNA REDDY D Hiremath V.S., Reddy D.M. Effect of ply orientation and laminate thickness on carbon fibre reinforced polymers under low-velocity impact [Einfluss der Gewebeorientierung und Laminatdicke auf kohlenstofffaserverstärkte Polymere unter Stoßbeanspruchung mit niedriger Geschwindigkeit] Materialwissenschaft und Werkstofftechnik WOS 1521-4052 1.034
394 October  2022 SMEC DTEE 15729 Dr. PONNUSAMY P Srinivasan V., Palanisamy P. Carbon Nanotubes: An Optimistic Nanomaterial with Superfluity Characteristics in Drug Delivery for the Treatment of Arthritis Indian Journal of Pharmaceutical Education and Research WOS 0019-5464 0.843
395 October  2022 SMEC DDA 11151 Dr. SENTHIL KUMAR S Rajasekharan Unnithan A.R., Subramaniam S. Performance Enhancement of Semi- active Continuous Skyhook Control Using Chaotic Map Particle Swarm Optimization-Based Stability Augmentation System SAE International Journal of Passenger Vehicle Systems SCOPUS 2770-3479 -
396 October  2022 SMEC DAE 14475 Dr. KANNAN C Kannan C., Agarwal S., Dighe H., Dash R.K. Design, analysis and validation of a centralized shifting mechanism with an electrical actuator Engineering Research Express SCOPUS 2631-8695  -
397 October  2022 SMEC DDA 13462 Dr. NARENDIRANATH BABU T Anwarsha A., Babu T.N. Recent advancements of signal processing and artificial intelligence in the fault detection of rolling element bearings: a review Journal of Vibroengineering SCOPUS 1392-8716 -
398 October  2022 SMEC DDA 10629 Dr. KANISH T.C Narayana Moorthy N., Kanish T.C. Fault detection and identification in friction drilling process Jurnal Tribologi SCOPUS 2289-7232 -
399 October  2022 SMEC DME 15757
16146
Dr. SENTHIL KUMARAN S
Dr. HUMRUTHA G
Khanna M., Chadha U., Banerjee A., Singh R.P., Ghiridharan H., Narayanan D., Kataray T., Humrutha G., Selvaraj S.K., Dhanalakshmi S., Nagalakshmi R., Jayakumar K., Karthikeyan B. Feasibility of friction stir welding for in- space joining processes: a simulation- based experimentation International Journal on Interactive Design and Manufacturing SCOPUS 1955-2513 -
400 October  2022 SMEC DDA 13315 Dr. VENKATESAN K K V. Machining of different superalloys under MQL using hBN nanofluids Advances in Materials and Processing Technologies SCOPUS 2374-068X -
401 October  2022 SMEC DDA 13315
13124
Dr. VENKATESAN K
Dr. DEVENDIRAN S
Venkatesan K., Devendiran S., Murali T. A hybrid algorithm for multi-objective optimisation of parameters nanofluid in MQL-turning of Inconel X-750 Advances in Materials and Processing Technologies SCOPUS 2374-068X -
402 October  2022 SMEC DTM 15850 Dr. JOSE S Swaminathan J., Medina- Cárdenas Y., Rico- Bautista D. Experimental learning using Remotely Reality in Engineering education: a systematic literature review [Aprendizaje experimental mediante realidad remota en la enseñanza de la ingeniería: Una revisión de literatura] RISTI - Revista Iberica de Sistemas e Tecnologias de Informacao SCOPUS 1646-9895 -
403 October  2022 SMEC DTEE
DME
15272
15274
Dr. SABOOR S
Dr. CHINMAYA PRASAD MOHANTY
Maduru V.R., Shaik S., Cuce E., Kirankumar G., Chelliah A., Afzal A., Mohanty C.P. Analysis of effective parameters of building’s glazing on energy savings and carbon emission mitigation prospective International Journal of Ambient Energy SCOPUS 2162-8246 -
404 October  2022 SMEC DME 15757 Dr. SENTHIL KUMARAN S Priya K., Karthika P., Kaliappan J., Selvaraj S.K., Nagalakshmi R., Molla B. Caption Generation Based on Emotions Using CSPDenseNet and BiLSTM with Self-Attention Applied Computational Intelligence and Soft Computing SCOPUS 1687-9724 -
405 October  2022 SMEC DTEE 17043 Dr. DEEPAKKUMAR R Parthipan D., Rajagopal D. Comparative analysis of cross flow and jet impingement techniques of heat sink in electronics cooling Materials Today: Proceedings SCOPUS 2214-7853 -
406 October  2022 SMEC DME 15757 Dr. SENTHIL KUMARAN S Gupta P., Krishna C., Rajesh R., Ananthakrishnan A., Vishnuvardhan A., Patel S.S., Kapruan C., Brahmbhatt S., Kataray T., Narayanan D., Chadha U., Alam A., Selvaraj S.K., Karthikeyan B., Nagalakshmi R., Chandramohan V. Industrial internet of things in intelligent manufacturing: a review, approaches, opportunities, open challenges, and future directions International Journal on Interactive Design and Manufacturing SCOPUS 1955-2513 -
407 October  2022 SMEC DME 15757 Dr. SENTHIL KUMARAN S Menon A.P., Lahoti V., Gunreddy N., Chadha U., Selvaraj S.K., Nagalakshmi R., Jayakumar K., Karthikeyan B. Quality control tools and digitalization of real-time data in sustainable manufacturing International Journal on Interactive Design and Manufacturing SCOPUS 1955-2513 -
408 November 2022 SMEC DME 14802 Dr. JAYAKRISHNA K Vimal K.E.K., Kumar A., Sunil S.M., Suresh G., Sanjeev N., Kandasamy J. Analysing the challenges in building resilient net zero carbon supply chains using Influential Network Relationship Mapping Journal of Cleaner Production WOS 0959-6526 11.072
409 November 2022 SMEC DTEE 15272 Dr. SABOOR S Khandal S.V., Razak A., Veza I., Afzal A., Alwetaishi M., Shaik S., Ağbulut Ü., Rashedi A. Hydrogen and dual fuel mode performing in engine with different combustion chamber shapes: Modelling and analysis using RSM-ANN technique International Journal of Hydrogen Energy WOS 0360-3199 7.139
410 November 2022 SMEC DTEE 16349
16371
Dr. SAKTHIVADIVEL D
Dr. BALAJI K
Sharma A., Gunreddy N., Mulamalla A.R., Duraisamy S., Sivan S., Poongavanam G.K., Kumar B. Conductive and convective heat transfer augmentation in flat plate solar collector from energy, economic and environmental perspectives — a comprehensive review Environmental Science and Pollution Research WOS 1614-749 5.190
411 November 2022 SMEC DAE 13339 Dr. ASHOK B Jacob A., Ashok B., Lawrence J., Soosairaj A.S., Anandan J., Elango M. Exploring the potential of third- generation microalgae bio-alcohol and biodiesel in arresting particulate smoke emissions and greenhouse gases using CART Environmental Science and Pollution Research WOS 1614-749 5.190
412 November 2022 SMEC DDA 13097 Dr. VENKATESAN S Anbu M., Balakichenin R., Muthaiyan P., Sundaramoorthy S., Amesho K.T.T., Subramani V. Experimental investigation on the performance characteristics and emissions of a CI engine fueled with enhanced microwave-assisted Karanja seed bio-oil Environmental Science and Pollution Research WOS 1614-749 5.190
413 November 2022 SMEC DTEE 17043 Dr. DEEPAKKUMAR R Burye N.N., Sathyamurthy R., Rajagopal D. Computational fluid dynamics–based parametric study on the performance of solar air heater channel Environmental Science and Pollution Research WOS 1614-749 5.190
414 November 2022 SMEC DDA 17046 Dr. NAVEEN J Norrrahim M.N.F., Knight V.F., Nurazzi N.M., Jenol M.A., Misenan M.S.M., Janudin N., Kasim N.A.M., Shukor M.F.A., Ilyas R.A., Asyraf M.R.M., Naveen J. The Frontiers of Functionalized Nanocellulose-Based Composites and Their Application as Chemical Sensors Polymers WOS 2073-4360 4.967
415 November 2022 SMEC DME 14807 Dr. SAMPATH KUMAR T Haribaskar R., Kumar T.S., Tamiloli N. Surface Integrity of additively manufactured Inconel-718 by peening approaches Materials and Manufacturing Processes WOS 1042-6914 4.783
416 November 2022 SMEC DDA 12625 Dr. VASUDEVAN R Gnanasekar S., Rajamohan V. Numerical and Experimental Investigations on Nonlinear Buckling Response of a Laminated Composite Shell International Journal of Applied Mechanics WOS 1758-8251 3.951
417 November 2022 SMEC DME 15757 Dr. SENTHIL KUMARAN S Venkit H., Selvaraj S.K. Novel Technique for Design and Manufacture of Alternating Gradient Composite Structure of Aluminum Alloys Using Solid State Additive Manufacturing Technique Materials WOS 1996-1944 3.748
418 November 2022 CO2 DTEE 13605 Dr. RANJITHA J Dhanapal D., Kumar S.A., Ranjitha J. Areca fiber/epoxy nano-composite reinforced with amine-functionalized nano-alumina-enhancement in thermal and thermo-mechanical properties Materials Today Communications WOS 2352-4928 3.662
419 November 2022 SMEC DME 13576 Dr. NARENDRA KUMAR U Thiyagu C., NarendraKumar U. Effect of ammonium polyphosphate on fire-retardant, mechanical, and vibrational analysis of epoxy/glass/ramie hybrid composite Polymer Composites WOS 0272-8397 3.531
420 November 2022 SMEC DTEE 12246 Dr. GUNDABATTINI EDISON Madhavan S., P B R.D., Gundabattini E., Mystkowski A. Thermal Analysis and Heat Management Strategies for an Induction Motor, a Review Energies WOS 1996-1073 3.252
421 November 2022 SMEC DTEE 16170 Dr. GAURAV GUPTA Yadav A.S., Alam T., Gupta G., Saxena R., Gupta N.K., Allamraju K.V., Kumar R., Sharma N., Sharma A., Pandey U., Agrawal Y. A Numerical Investigation of an Artificially Roughened Solar Air Heater Energies WOS 1996-1073 3.252
422 November 2022 SMEC DDA 11149 Dr. MANOHARAN R Selvaraj R., Ramamoorthy M. Recent developments in semi-active control of magnetorheological materials- based sandwich structures: A review Journal of Thermoplastic Composite Materials WOS  0892-7057 3.027
423 November 2022 SMEC DME 11234 Dr. ARIVAZHAGAN N Adarsh S.J., Natarajan A. Analysis and prediction of the joint strength of friction stir welded Aluminium 5754 to polyamide using response surface methodology and artificial neural network Journal of Thermoplastic Composite Materials WOS  0892-7057 3.027
424 November 2022 SMEC DDA 16346 Dr. GUNJI BALA MURALI Ramakrishna D., Bala Murali G. Bio-inspired 3D-printed lattice structures for energy absorption applications: A review Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications WOS 1464-4207 2.663
425 November 2022 SMEC DAE 10397 Dr. YAGNA S MUKKAMALA Mukkamala Y., Dirker J. A New Two-Phase Multiplier for Flow Pressure Drop in Multiport Minichannel Condensers and Evaporators Heat Transfer Engineering WOS 1521-0537 2.431
426 November 2022 SMEC DME
DAE
15744
15780
Dr. RAJAMURUGAN G
Dr. PRABU K
Rajamurugan G., Sathyajith S., Krishnasamy P. Effect of thermal cyclic corrosion on the microstructural degradation of platinum aluminide coatings Surface Topography: Metrology and Properties WOS 2051-672X 2.185
427 November 2022 SMEC DME 15757 Dr. SENTHIL KUMARAN S Dewangan S., Selvaraj S.K., Karthikeyan B., Adane T.M., Chattopadhyaya S., Królczyk G., Raju R. Metallographic Investigation on Postweld Heat-Treated0.21%C-1020 Steel Plates Joined by SMAW Method Advances in Materials Science and Engineering WOS 1687-8442 2.098
428 November 2022 SMEC DME 15284 Dr. RIJESH M Biradar A., Rijesh M. Surface roughness–the key for roll bonding aluminium Materials Science and Technology (United Kingdom) WOS 0267-0836 2.060
429 November 2022 SMEC DME 11234 Dr. ARIVAZHAGAN N Sandeep R., Arivazhagan N. Impact of Pin Length on Joint Strength of Friction Lap Welded Aluminum Alloy 7475 and Polyphenylene Sulfide Thermoplastic Polymer Joints Journal of Materials Engineering and Performance WOS 1059-9495 2.036
430 November 2022 SMEC DME 14836 Dr. JOHN RAJAN A Dash A., Kabra S., Misra S., Hrishikeshan G., Singh R.P., Patterson A.E., Chadha U., Rajan A.J., Hirpha B.B. Comparative property analysis of fused filament fabrication PLA using fresh and recycled feedstocks Materials Research Express WOS 2053-1591 2.025
431 November 2022 SMEC DME 14836 Dr. JOHN RAJAN A Satpute J., Rajan J. ANALYSIS OF ENERGY, EXERGY, ENVIRONMENTAL, AND ECONOMICS (4E) ON PHOTOVOLTAIC-THERMAL COLLECTOR SYSTEM Thermal Science WOS 0354-9836 1.971
432 November 2022 SMEC DDA 14781 Dr. MANIKANDAN M Prem Kumar M., Manikandan M. Investigation of corrosion behaviour on Ni–Cr–Co and Ni–Cr–Mo alloys exposed to molten salt for thermal energy storage applications Corrosion Engineering Science and Technology WOS 1478-422X 1.971
433 November 2022 SMEC DTEE 14800 Dr. TAPANO KUMAR HOTTA Patil N.G., Hotta T.K. A Combined Liquid Cold Plate and Heat Sink Based Hybrid Cooling Approach for the Temperature Control of Integrated Circuit Chips Journal of Thermal Science and Engineering Applications WOS 1948-5093 1.879
434 November 2022 CIMR DME
DDA
11234
14789
14868
Dr. ARIVAZHAGAN N
Dr. NAGESWARA RAO M
Dr. ARIVARASU M
Muthu S.M., Arivazhagan N., Rao M.N., Arivarasu M. Oxidation and Hot Corrosion Behaviour of Ni-Based Superalloy 825 and AISI 321 Dissimilar Laser Weldment in K2SO4–60% NaCl Molten Salt Environment at 650°C Physics of Metals and Metallography WOS 0031-918X 1.319
435 November 2022 CIMR DME 17041 Dr. ASHISH KUMAR Ashish Kumar Saxena, Telrandhe S., Harshavardhana N. Mathematical Modelling for Understanding the Effect of Stress State on Relative Slip Activity in HCP Titanium Physics of Metals and Metallography WOS 0031-918X 1.319
436 November 2022 ARC DAE 10693 Dr. RAMESH KUMAR C Jose S.S., Chidambaram R.K. Electric Vehicle Air Conditioning System and Its Optimization for Extended Range—A Review World Electric Vehicle Journal SCOPUS 2032-6653 -
437 November 2022 SMEC DME 16370 Dr. RAVITEJA BUDDALA Buddala R., Mahapatra S.S., Singh M.R. Solving multi-objective flexible flow-shop scheduling problem using teaching- learning-based optimisation embedded with maximum deviation theory International Journal of Industrial and Systems Engineering SCOPUS 1748-5037 -
438 November 2022 SMEC DME 15262 Dr. ARAVIND RAJ S Sakthi Balan G., Prakash B., Aravind Raj S., Karthik S., Mohan Kumar V. Analysis on the impact of recycled ceramic waste, fiber format, and manufacturing techniques on polymer composite properties Engineering Research Express SCOPUS 2631-8695 -
439 November 2022 SMEC DME 12334 Dr. PADMANABHAN K Bhanage A., Padmanabhan K. Quasi-Static and Fatigue Reliability Analysis of C45 Automotive Leaf Spring Beam Under Flexural Loads in Sub-Zero Temperature Journal of Failure Analysis and Prevention SCOPUS 1864-1245 -
440 November 2022 SMEC DAE 12869
10063
Dr. PORPATHAM E
Dr. SENTHIL KUMAR A
Subramanian J., Ekambaram P., Arumugam S.K. Investigation on combustion and emission characteristics of hydrogen- enriched dual-fuel engine operated under waste frying oil biodiesel Heat Transfer SCOPUS 2688-4534 -
441 November 2022 SMEC DAE
DME
15780
15744
Dr. PRABU K
Dr. RAJAMURUGAN G
Krishnasamy P., Arvinda Pandian C.K., Rajamurugan G., Jayaraman T., Maniyambath A., Kesav Chandran J. Dynamic mechanical behavior of mono/synthetic-natural fiber composites—a review Engineering Research Express SCOPUS 2631-8695 -
442 November 2022 SMEC DDA
DME
12803
10042
Dr. JEEVA P.A
Dr. NARAYANAN S
Karthikeyan S., Rajagopal D., Vamsikrishna Reddy K., Prashanth B., Mukesh Reddy B., Narayanan S., Jeeva P.A. An investigation on laser shot peened surfaces Journal of Applied Research and Technology SCOPUS 1665-6423 -
443 November 2022 SMEC DTEE 14032 Dr. BIBIN JOHN Javeed A., John B. An experimental study on tribofilm formation and endurance with nanolubricants Tribology - Materials, Surfaces and Interfaces SCOPUS 1751-584X -
444 December 2022 SMEC DAE 12449 Dr. THUNDIL KARUPPA RAJ R Yarasai S.S., Ravi D., Yoganand S., Raj Rajagopal T.K. Numerical investigation on the performance and combustion characteristics of a cavity based scramjet combustor with novel strut injectors International Journal of Hydrogen Energy WOS 0360-3199 7.139
445 December 2022 SMEC DTEE 12585 Dr. SATHEESH A Jory K., Satheesh A. Marangoni convection in shallow annular pools of silicone oil heated from above Case Studies in Thermal Engineering WOS 2214-157X 6.268
446 December 2022 SMEC DDA 16352 Dr. ARULVEL S Deenadayalan K., Murali V., Elayaperumal A., Satheesh Kumar A., Arulvel S., Shahedi Asl M. Friction and wear properties of short time heat-treated and laser surface re- melted NiCr-WC composite coatings at various dry sliding conditions Journal of Materials Research and Technology WOS 2238-7854 6.267
447 December 2022 SMEC DDA 15768 Dr. RENOLD ELSEN S Ravoor J., Selvam R.E. Microwave sintering and characterization of robocasted HA, CNT-HA scaffold structures for bone regeneration applications Ceramics International WOS 0272-8842 5.532
448 December 2022 SMEC DTEE 14810 Dr. PRAKASH R Pandey S.P., Upadhyay R., Prakash R., Kumar S. Performance and emission analysis of blends of bio-oil obtained by catalytic pyrolysis of Argemone mexicana seeds with diesel in a CI engine Environmental Science and Pollution Research WOS 1614-7499 5.19
449 December 2022 CO2 DTEE 16348 Dr. PRAVEEN KUMAR G Bhuvaneshwaran K., Govindasamy P.K. Technical assessment of novel organic Rankine cycle driven cascade refrigeration system using environmental friendly refrigerants: 4E and optimization approaches Environmental Science and Pollution Research WOS 1614-7499 5.19
450 December 2022 SMEC DTEE 15272 Dr. SABOOR S Tripathi A.K., Aruna M., Venkatesan E.P., Abbas M., Afzal A., Shaik S., Linul E. Quantitative Analysis of Solar Photovoltaic Panel Performance with Size-Varied Dust Pollutants Deposition Using Different Machine Learning Approaches Molecules WOS 1420-3049 4.927
451 December 2022 SMEC DTEE 15272 Dr. SABOOR S Dennis Quadros J., Khan S.A., Prashanth T., Iqbal Mogul Y., Hanumanthraya R., Abbas M., Saleel C.A., Shaik S. Heat Transfer Characteristics of Fullerene and Titania Nanotube Nanofluids under Agitated Quench Conditions ACS Omega WOS 2470-1343 4.132
452 December 2022 SMEC DTEE 16349
16348
14032
Dr. SAKTHIVADIVEL D
Dr. PRAVEEN KUMAR G
Dr. BIBIN JOHN
Pavithiran C.K.P., Sakthivadivel D., Kumar G.P., John B., Jaganathan V.M., Iniyan S. Energy analysis and carbon dioxide mitigation potential of biomass-driven combined power, cooling, and cooking systems for rural applications Biomass Conversion and Biorefinery WOS 2190-6823 4.05
453 December 2022 SMEC DTEE 16349 Dr. SAKTHIVADIVEL D Nivash V., Sakthivadivel D. Characterization and thermo-chemical conversion of invasive biomass by varying gasifying agents for hydrogen rich producer gas using ASPEN Plus Biomass Conversion and Biorefinery WOS 2190-6823 4.05
454 December 2022 SMEC DDA 14781 Dr. MANIKANDAN M Arunprakash R., Manikandan M., Meshram S.D. Development of Multipass Gas Tungsten Arc Welding Technique for Aerospace Grade 18% Ni-Co-Mo Based Maraging Steel to Improve the Metallurgical and Mechanical Properties by Reducing Austenite Pools Journal of Manufacturing Science and Engineering WOS 1087-1357 3.952
455 December 2022 SMEC DTEE 15272 Dr. SABOOR S Mohamed I.S., Venkatesan E.P., Parthasarathy M., Medapati S.R., Abbas M., Cuce E., Shaik S. Optimization of Performance and Emission Characteristics of the CI Engine Fueled with Preheated Palm Oil in Blends with Diesel Fuel Sustainability (Switzerland) WOS 2071-1050 3.889
456 December 2022 SMEC DTEE 12246 Dr. GUNDABATTINI EDISON Kumar G.N., Gundabattini E. Investigation of Supercritical Power Plant Boiler Combustion Process Optimization through CFD and Genetic Algorithm Methods Energies WOS 1996-1073 3.252
457 December 2022 CIMR DME 13954 Dr. RAJA ANNAMALAI Muthuchamy A., Srikanth M., Yadav D.V., Raja Annamalai A. Effect of Ta addition on the sinterability of spark plasma sintered W-Ni-Fe alloy Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture WOS 0954-4054 2.759
458 December 2022 SMEC DTEE 15272 Dr. SABOOR S Parthasarathy M., Elumalai P.V., Murunachippan M., Senthilkumar P.B., Shaik S., Sharifpur M., Khalilpoor N. Influence of Injection Pressure on the Dual-Fuel Mode in CI Engines Fueled with Blends of Ethanol and Tamanu Biodiesel International Journal of Chemical Engineering WOS 1687-8078 2.729
459 December 2022 SMEC DME 15259 Dr. MURALIDHARAN B Radhamani R., Balakrishnan M. The effect of copper on phase transformation, microstructure and mechanical characterization of Ni50- xTi50Cux shape-memory alloy Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications WOS 2041-3076 2.663
460 December 2022 SMEC DME 15757
13356
Dr. SENTHIL KUMARAN S
Dr. SREETHUL DAS
Vivek S.S., Karthikeyan B., Selvaraj S.K., Pradeep Kumar M., Chadha U., Das S., Ranjani G., Rajasakthivel R., Tamilvendhan K., Adane T.M. A comprehensive study on physico- mechanical properties of non-metallic fibre reinforced SCC blended with metakaolin and alcofine Materials Research Express WOS 2053-1591 2.025
461 December 2022 SMEC DME 15757 Dr. SENTHIL KUMARAN S Dewangan S., Selvaraj S.K., Karthikeyan B., Chadha U., Singhal P., Sarma P.P., Raju P.V., Kumar U., Pradeep Kumar M. Fractography analysis into low-C steel undergone through various destructive mechanical tests Materials Research Express WOS 2053-1591 2.025
462 December 2022 SMEC DTEE 16170 Dr. GAURAV GUPTA Ray S., Pati P.R., Gupta G., Nayak S.K. Analysis and prediction of abrasion wear properties of glass–epoxy composites filled with eggshell powder Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering WOS 2041-3009 1.822
463 December 2022 CIMR DDA 14789 Dr. ARIVARASU M Muthu S.M., Arivarasu M., Sanford B.R., Dinakaran V., Gupta S. Microstructure and hot corrosion characteristics evaluation of high-velocity oxy-fuel sprayed Ni–20%Cr coating on AISI 321 steel with Na2SO4–60%V2O5 salt deposits Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering WOS 2041-3009 1.822
464 December 2022 SMEC DDA 13618 Dr. NIRANJANA BEHERA Gupta A., Mohan I., Jude R.R., Suryawanshi A., Behera N. Investigation of stress and tribological properties of dental composite materials using FEM Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology WOS 2041-305X 1.818
465 December 2022 SMEC DDA 14461 Dr. MALLIKARJUNA REDDY D Babu Rao K., Reddy D.M. Fault diagnosis in rotors using adaptive neuro-fuzzy inference systems Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science WOS 2041-2983 1.758
466 December 2022 SMEC DME 11819 Dr. VEZHAVENDHAN R Gopal K.V., Kumar K.R.V., Suresh G., Rajasekharan, V., Nagarajan P.K., Meenakshi C.M. Investigation of TiO2 Nano Filler in Mechanical, Thermal Behaviour of Sisal/Jute Fiber Reinforced Interpenetrating Polymer Network (IPN) Composites Materials Research WOS 2053-1591 1.511
467 December 2022 SMEC DME 15274 Dr. CHINMAYA PRASAD MOHANTY Jadhav P.S., Mohanty C.P. Comparative analysis of indirect, direct, and hybrid cryogenic machining of Nimonic C-263 superalloy Journal of Engineering Research (Kuwait) WOS 2307-1877 1.325
468 December 2022 SMEC DME 15757 Dr. SENTHIL KUMARAN S Selvaraj S.K., Kaliappan J., Kumar S.R., Prakash C., Buddhi D., Gupta L.R., Hadidi H.M. PREDICTION of NANO-COATED TOOL WEAR USING BAT and WHALE OPTIMIZATION ALGORITHMS Surface Review and Letters WOS 0218-625X 1.24
469 December 2022 SMEC DDA
DME
13370
11235
Dr. SENTHILNATHAN N
Dr. PANDIVELAN C
Gopalan V., Narayanaswamy H.B., Deshmukh A.R., Natarajan S., Munusamy A., Subramanian J., Chinnayan P. Virtual Fatigue Life Prediction of Back Strip Butt Weld Joint under Bending and Torque Load Conditions Medziagotyra WOS 1392-1320 0.854
470 December 2022 SMEC DTEE 13382 Dr. CHIRANJEEVI C Narang A., Roy S., Kataray T., Bonde V., Rajesh S., Chiranjeevi C., Chadha U., Hirpha B.B. Performance Evaluation of a Photovoltaic-Thermal Collector Coupled Stepped Solar Still for Indian Climatic Conditions Modelling and Simulation in Engineering SCOPUS 1687-5605 -
471 December 2022 SMEC DME 14802 Dr. JAYAKRISHNA K Singh A., Kumar V., Verma P., Kandasamy J. Identification and severity assessment of challenges in the adoption of industry 4.0 in Indian construction industry Asia Pacific Management Review SCOPUS 1029-3132 -
472 December 2022 SMEC DTEE 14800 Dr. TAPANO KUMAR HOTTA Dhayanithi J., Gupta M.K., Hotta T.K., Das T. Numerical investigations on the testing and selection of different phase change materials for peak load reduction in buildings of Indian climates Materials Today: Proceedings SCOPUS 2214-7853 -
473 December 2022 SMEC DDA 15283 Dr. DARIUS GNANARAJ S Bheda T., Joshi D., Dinesh Kumar P.K., Darius Gnanaraj S. Modeling and Simulation of Brake Disc Using Lightweight Materials Journal of The Institution of Engineers (India): Series D SCOPUS 2250-2130 -
474 December 2022 SMEC DME 12334 Dr. PADMANABHAN K Bhanage A., Padmanabhan K. Quasi-Static and Fatigue Reliability of Glass/Epoxy Composite Automotive Leaf Spring Beams Under Flexural Loads at Sub-Zero Temperatures Journal of Failure Analysis and Prevention SCOPUS 1864-1245 -
475 December 2022 SMEC DTEE 16351 Dr. DSILVA WINFRED RUFUSS D Dsilva Winfred Rufuss D., Wu Y., Davies P.A. Effects of feed and draw solution temperature on the performance of Aquaporin HFFO.6 membrane in forward osmosis Materials Today: Proceedings SCOPUS 2214-7853 -
476 December 2022 SMEC DME 14836 Dr. JOHN RAJAN A Kishore S.R., Mathew A., Tomy A.T., Sugavaneswaran M., John Rajan A. Design and Development of Hot Vapour Polishing System and Optimization of It’s Process Parameters for FDM Printed Parts Tribology in Industry SCOPUS 0354-8996 -
477 December 2022 SMEC DDA 15768 Dr. RENOLD ELSEN S Thangavel M., Elsen Selvam R. Review of Physical, Mechanical, and Biological Characteristics of 3D-Printed Bioceramic Scaffolds for Bone Tissue Engineering Applications ACS Biomaterials Science and Engineering WOS 2373-9878 5.395
478 December 2022 SMEC DDA 14828
17046
Dr. EDWIN SUDHAGAR P
Dr. NAVEEN J
Ganapathy V., Muthukumaran G., Sudhagar P.E., Rashedi A., Norrrahim M.N.F., Ilyas R.A., Goh K.L., Jawaid M., Naveen J. Mechanical properties of cellulose-based multiscale composites: A review Polymer Composites WOS 0272-8397 3.531
479 December 2022 SMEC DTM 15850 Dr. JOSE S Balachandran S., Swaminathan J. Advances in Indoor Cooking Using Solar Energy with Phase Change Material Storage Systems Energies WOS 1996-1073 3.252
480 December 2022 SMEC DDA
DME
14781
11234
14868
Dr. MANIKANDAN M
Dr. ARIVAZHAGAN N
Dr. NAGESWARA RAO M
Jose B., Manoharan M., Natarajan A., Muktinutalapati N.R., Madhusudhan Reddy G., Meshram S.D. Current research and developments in welding of 18% nickel maraging steel Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications WOS 2041-3076 2.663
481 December 2022 SMEC DME 15744 Dr. RAJAMURUGAN G ShivaKumar G.N., Rajamurugan G. Understanding the effect of particle reinforcement on friction stir weldment: A review Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications WOS 2041-3076 2.663
482 December 2022 SMEC DDA 13097 Dr. VENKATESAN S Kanapaakala G., Subramani V. A review on β-Ti alloys for biomedical applications: The influence of alloy composition and thermomechanical processing on mechanical properties, phase composition, and microstructure Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications WOS 2041-3076 2.663
483 December 2022 CBCMT DME 16164 Dr. SUYA PREM ANAND P Ezhilmaran V., Suya Prem Anand P., Kannan S., Sivashanmugam N., Jayakrishna K., Kalusuraman G. Review of bioresorbable AZ91, AZ31 and Mg–Zn–Ca implants and their manufacturing methods Materials Science and Technology (United Kingdom) WOS 0267-0836 2.06
484 December 2022 SMEC DME 15757 Dr. SENTHIL KUMARAN S Saicharan K., Sai M.K., Chandrasekhar P., Gopinath A., Selvaraj S.K. A concise approach to designing an intelligent welding station system platform International Journal on Interactive Design and Manufacturing SCOPUS 1955-2513 -
485 December 2022 SMEC DME 15757 Dr. SENTHIL KUMARAN S Raj A., Gyaneshwar A., Chadha U., Chadha A., Asija A., Abrol A., Priya S., Alam A., Joshi A., Bastola K., Selvaraj S.K., Karthikeyan B., Nagalakshmi R., Chandramohan V., Hadidi H. Green manufacturing via machine learning enabled approaches International Journal on Interactive Design and Manufacturing SCOPUS 1955-2513 -

Books & Chapters

Sl No Acad Year Faculty Name Content Title ISBN Publisher Content Type
1 2023 Akash Mohanty, U. Rahamathunnisa, K. Sudhakar & Anish Mariadhas Research Methodology Techniques 978-93-5625-634-7 Scientific Int. Publishing House Book Published
2 2022 Rajkumar.E & Narendranath Babu T Text Book of Basic Mehcnaical Engineering 9789355450319'   Book Authored
3 2022 Tapano Kumar Hota Hybrid Genetic Optimization for IC Chips Thermal Control: with MATLAB Application under the CRC Press - Taylor & Francis Group 9781003188506'   Book Authored
4 2022 K. Padmanabhan Engineering Pedagogy Towards Outcome-Based Education 978-0-367-53745-6   Chapter Authored
5 2022 K. Padmanabhan Industrial Automation and Robotics 978-0-367-63985-3   Chapter Authored
6 2022 Tapano Kumar Hota Energy Storage Systems: Optimization and Application 978-981-19-4502-1 Springer published an edited book 
7 2022 K. Padmanabhan Viscoelastic response of hybrid polymeric dental composites in sliding contacts and applications 978-3-110-724660 De Gruyter Chapter Authored
8 2022 R. Subhashini Human Resource Management 978-93-92313-35-6 Taran Publication, New Delhi Published 
9 2022 K. Padmanabhan Industrial Automation and Robotics 978-0-367-63985-3 Chapter Authored  
10 2022 K. Padmanabhan Engineering Pedagogy Towards Outcome-Based Education 978-0-367-53745-6 Chapter Authored  
11 2022 Tapano Kumar Hota Hybrid Genetic Optimization for IC Chips Thermal Control: with MATLAB Application under the CRC Press - Taylor & Francis Group 978-1-003-18850-6 Book Authored  
12 2022 Rajkumar.E & Narendranath Babu T TEXT BOOK OF BASIC MECHANICAL ENGINEERING 978-9-355-45031-9 Book Authored  
13 2022 B. Ashok NOx Emission Control Technologies in Stationary and Automotive Internal Combustion Engines 978-0-128-23955-1 Book Edited  
14 2022 M. Rajesh, K. Jayakrishna Repair of Advanced Composites for Aerospace ApplicationsMohamed Thariq 978-1-003-20099-4 Book Edited  
15 2022 Thanigaivelan Rajasekaran, Rajan N, Arul T.G Advanced Manufacturing Techniques for Engineering and Engineered Materials 978-1-799-89574-9 Chapter Authored  
16 2022 B. Ashok NOx Emission Control Technologies in Stationary and Automotive Internal Combustion Engines 978-0-128-23955-1 Chapter Authored  
17 2022 Kandasamy Jayakrishna Natural Fiber-Reinforced Composites Tamil Moli  9.78353E+12 Chapter Authored  
18 2022 Anuj Kumar Effect of hydrofoils on the starting torque characteristics of the Darrieus hydrokinetic turbine 9.78032E+12 Chapter Authored  
19 2022 Kasianantham Nanthagopal, B. Ashok NOx Emission Control Technologies in Stationary and Automotive Internal Combustion Engines 9.78013E+12 Chapter Authored  
20 2022 P Edwin Sudhagar Repair of Advanced Composites for Aerospace Applications 9.781E+12 Chapter Authored  
21 2022 Hemen Sarma, Sonam Gupta, Mahesh Narayan, Ram Prasad, Anand Krishnan Engineered Nanomaterials for Innovative Therapies and Biomedicine  978-3-030-82917-9 Chapter Authored  
22 2022 Murugan Rajesh Repair of Advanced Composites for Aerospace Applications 9.781E+12 Chapter Authored  
23 2022 S. Arulvel, K. Jayakrishna Composite and Composite CoatingsMohamed Thariq 9.781E+12 Chapter Authored  
24 2022 Narendiranath Babu Thamba, Venkatesan S Repair of Advanced Composites for Aerospace Applications 9.78103E+12 Chapter Authored  
25 2022 Kasianantham Nanthagopal, B. Ashok NOx Emission Control Technologies in Stationary and Automotive Internal Combustion Engines 9.78013E+12 Chapter Authored  
26 2022 Ashwin Jacob, B. Ashok NOx Emission Control Technologies in Stationary and Automotive Internal Combustion Engines 9.78013E+12 Chapter Authored  
27 2022 Atulya K. Nagar, Dharm Singh Jat, Gabriela Mar�n-Ravent�s, Durgesh Kumar Mishra Intelligent Sustainable Systems 9.78981E+12 Chapter Authored  
28 2022 SUBASHINI R, VELMURUGAN G A PARADIGN SHIFT IN MARKETING: CREATING VALUE FOR A MORE SUSTAINABLE FUTURE 9.78921E+12 Chapter Authored  
29 2022 SUBASHINI R, VELMURUGAN G, SABHARINATH R EMERGING TRENDS IN BUSINESS MANAGEMENT 9.78939E+12 Chapter Authored  
30 2022 VELMURUGAN G, SUBASHINI R EMERGING TRENDS IN BUSINESS MANAGEMENT 9.78939E+12 Chapter Authored  
31 2022 Malayathodi Rijesh Engineering Principles - Welding and Residual Stresses 9.7818E+12 Chapter Authored  
32 2022 B. Ashok NOx Emission Control Technologies in Stationary and Automotive Internal Combustion Engines 9.78013E+12 Chapter Authored  
33 2022 S.Senthil Kumaran Environmentally Sustainable Corrosion Inhibitors 9.78032E+12 Chapter Authored  
34 2022 S.Senthil Kumaran Nanosensors for Smart Agriculture 9.78032E+12 Chapter Authored  
35 2022 Anuj Kumar Application of alternative clean energy  9.78032E+12 Chapter Authored  

2024

Sl. No Title of paper Name of the author/s Indexed In Scopus / WOS/Pub Med / ICI / Non Scopus ISSN number
1 Analysis and multi-objective evolutionary optimization of Solar-Biogas hybrid system operated cascade Kalina organic Rankine cycle for sustainable cooling and green hydrogen production Madhesh K., Devesh D.R., Vivin T., Praveen Raj M., Phelan P.E., Vignesh Kumar V., Praveen Kumar G. WOS 0196-8904
2 Experimental studies and comprehensive computational investigations on composites-based phase change material for battery thermal management systems in electric vehicles Subramanian M., Solomon J.M., Raja V., Stanislaus Arputharaj B., Shaik S., Saleel C.A., Alwetaishi M., Cuce E. WOS 2352-1538
3 Analysis of the benefits of adopting roof sandwich panels integrated with PCM versus PUR to mitigate energy costs and carbon dioxide emissions Arumugam C., Shaik S., Roy A., Kontoleon K.J., Cuce E., Shaik A.H., Chakraborty S., Alwetaishi M., Cuce P.M., Gupta M. WOS 2352-1538
4 Sub-zero temperature flexural and flexural fatigue behaviour of glass fabric /epoxy composite tubular anti roll bars Bhanage A., Padmanabhan K. WOS 0266-3538
5 Development of combustion control map for flex fuel operation in methanol powered direct injection SI engine Sathish Kumar T., Ashok B. WOS 0360-5442
6 Estimation of assorted injection schedules on hydrogen-diesel dual fuel and reactivity controlled compression ignition modes in a medium duty automotive engine Rameez P.V., Mohamed Ibrahim M. WOS 0016-2361
7 A novel g-C3N4 photocatalytic pretreatment for reducing silica and modifying the structure of rice straw for sustainable biofuel production Tamilselvan R., Selwynraj A.I. WOS 0016-2361
8 An experimental investigation in a CI engine for the performance, emission and combustion characteristics of liquid fuel produced through catalytic co-pyrolysis Mohan I., Mandal S., Panda A.K., Prakash R., Kumar S. WOS 0016-2361
9 Thermocapillary convection in shallow liquid layers for moderate Prandtl number liquids using different cylinder configurations Jory K., Satheesh A. WOS 0735-1933
10 Modeling of thermal energy saving in commercial buildings of Australia by balanced tree growth optimizer Bai X., Fouad Y., Chiranjeevi C., Alkhalaf S., Abdullaeva B.S., Alharbi F.S., Alzubaidi L.H., Jastaneyah Z., Garalleh H.A. WOS 2214-157X
11 Influence of high compression ratio on the performance of ethanol-gasoline fuelled lean burn spark ignition engine at part throttle condition Suresh D., Porpatham E. WOS 2214-157X
12 Comprehensive analysis of the greenhouse solar tunnel dryer (GSTD) using Tomato, snake Gourd, and Cucumber: Insights into energy Efficiency, exergy Performance, economic Viability, and environmental impact Duraivel B., Muthuswamy N., Gnanavendan S. WOS 0038-092X
13 Numerical study of combined phase change material and water cooling in hybrid wavy microchannels for HCPV cell Rathor S.K., Dubey V., Chakraborty A., Dugad S., Tiwari N. WOS 1359-4311
14 Investigation of machinability characteristics of Inconel 713C using new novel honeycomb and broken-parallel texture cutting inserts with graphene- based solid lubricants Bharath H., Venkatesan K. WOS 1526-6125
15 Unsteady wave drag reduction in hypersonic flows: Correlations and influences of pulsed energy magnitude and deposition location John B., Geca M.J., Saravanan S., Rajasekhar Rao D.S.N.V. WOS 1270-9638
16 Enhancing interfacial solar steam generation using hybrid (Co3O4/perovskite structured NaTaO3) nanomaterials coated on cotton cloth with sawdust composite evaporator Rengasamy M., Rajaram K. WOS 1873-4359
17 Strength enhancement of a flame- retardant hybrid composite by incorporating graphene nanoparticles for structural applications Thiyagu C., NarendraKumar U. WOS 0967-3911
18 Investigating the impact of heat treatment on the tribological behaviour of AZ80 magnesium alloy at high temperatures Todkar U., M S., B S.P., NarendraKumar U., A M., A R.A. WOS 2590-1230
19 Nonlinear free vibration analysis of internal thickness-tapered multi-layered composite rectangular plates undergoing moderately large deflections Poojary J., Rajamohan V. WOS 0022-460X
20 Optimization of ultrasound-aided extraction of bioactive ingredients from Vitis vinifera seeds using RSM and ANFIS modeling with machine learning algorithm Kunjiappan S., Ramasamy L.K., Kannan S., Pavadai P., Theivendren P., Palanisamy P. WOS 2045-2322
21 Development of an ammonia-biodiesel dual fuel combustion engine's injection strategy map using response surface optimization and artificial neural network prediction Elumalai R., Ravi K., Elumalai P.V., Sreenivasa Reddy M., Prakash E., Sekar P. WOS 2045-2322
22 Crystallographic texture and grain boundary character development of hot- press sintered tungsten heavy alloy: The effect of rhenium concentration Manikandan R., Raja Annamalai A. WOS 0254-0584
23 Experimental Studies to Reduce Usage of Fossil Fuels and Improve Green Fuels by Adopting Hydrogen-Ammonia-Biodiesel as Trinary Fuel for RCCI Engine Ramachandran E., Krishnaiah R., Perumal Venkatesan E., Medapati S.R., Sabarish R., Khan S.A., Asif M., Linul E. WOS 2470-1343
24 Experimental and numerical analysis of the thermal performance of pebble solar thermal collector Naik N.C.K., Priya R.K., Abulut Ü., Gürel A.E., Shaik S., Alzaed A.N., Alwetaishi M., Alahmadi A.A. WOS 2405-8440
25 Effect of spindle position on the performance and two-phase characteristics of controllable ejector for transcritical CO2 refrigeration system R. J.C., Arumugam S.K., Sadasivan S., John B., Kanna P.R. WOS 0896-8446
26 Challenges, Solutions and Future trends in EV-Technology: A Review Gnanavendan S., Selvaraj S.K., Jithin Dev S., Mahato K.K., Srii Swathish R., Sundaramali G., Accouche O., Azab M. WOS 2169-3536
27 Surface characteristics of 3D printed PEEK polymer using atomic force microscopy Karunanithi C., Natarajan S. WOS 1751-6161
28 Studies on Al-Si based hybrid aluminium metal matrix nanocomposites Dinesh Kumar P.K., Darius Gnanaraj S. WOS 2352-4928
29 Novel approach in manufacturing aluminum- based alternate layered composite material via friction stir additive manufacturing route Venkit H., Selvaraj S.K. WOS 2352-4928
30 Mechanical properties and microstructure of SS 316 L created by WAAM based on GMAW Sasikumar C., Oyyaravelu R. WOS 2352-4928
31 Ni-Co co-doped SnO2 nanomaterial coated polyurethane foam as a cost-efficient interfacial evaporator for solar steam generation Gnanasekaran A., Eswaramoorthy N., Rengasamy M., Elangovan V., Rajaram K. WOS 0167-577X
32 Effect of CFRP pin reinforcement and manufacturing technique on shear and dynamic properties of flat-joggle-flat composite joints Hiremath V.S., Reddy D.M. WOS 0167-577X
33 Enhancing the strength of adhesively bonded single-lap composite joints using fiber fabrics Thirunavukarasu A., Sikarwar R.S. WOS 0167-577X
34 Effects of printing parameters on hardness and wear characteristics of 3D printed polyetheretherketone (PEEK) polymer Chithambaram K., Senthilnathan N. WOS 0167-577X
35 Evaluation of metallurgical and mechanical characteristics of the ferritic stainless steel AISI 430 produced by GTAW-based WAAM Muthu S.M., Veeman D., Vijayakumar A., Senthur Prabu S., Sujai S., Arvind M., Gobinath E. WOS 0167-577X
36 Thermochemical Conversion Approach for Sustainable Bioenergy Production from Senna auriculata Biomass Source Kuppan B., Ganesan M.C. WOS 2191-4281
37 Tailoring the motion planning of humanoids in complex arena: A regression-firefly-based approach Sahu C., Parhi D.R., Muni M.K., Kamat S.S. WOS 0263-5747
38 Analyzing microstructural, residual stress, and mechanical characteristics in dissimilar welds of Inconel 59 and AISI 904L through double-pulsed gas metal arc welding Muthukumaran N., Arulmurugan B., Manikandan M. WOS 1464-4207
39 Reducing NOx emission from palm biodiesel/diesel blends in CI engine: A comparative study of cetane improvement techniques through hydrogenation and fuel additives Musthafa B., Asokan M.A. WOS 2041-3009
40 Statistical modelling of depth milling in Ti- 6AL4V using abrasive water jet machining Mogul Y.I., Quadros J.D., Khan S.A., Agrawal M., Kumar I., Shaik S., Saleel C.A., Saxena A. WOS 2041-3009
41 A novel approach to suppression of reverted austenite in aerospace grade thick maraging steel weldments using the turbo-TIG welding process Arunprakash R., Manikandan M. WOS 1568-5616
42 Bonding characteristics of aluminium laminates and aluminium graphite composites processed by roll bonding Biradar A., Rijesh M. WOS 1568-5616
43 Investigation of Surface Residual Stress, Mechanical Properties, and Metallurgical Characterization of Inconel 625 Multilayer Thin-Wall Component Using Cold Metal Transfer Technique Mahendiran S., Ramanujam R. WOS 1568-5616
44 Design of an internally cooled green tubular channel for turning application Murali T., Devendiran S. WOS 1806-3691
45 Experimental investigation and optimization with vegetable oil-based biodiesels as dielectric in EDM: green initiative towards sustainable manufacturing Rakshaskar R., Kannan C. WOS 1806-3691
46 Influence of Joule heating and magneto- hydrodynamic on double diffusion mixed convection in a cavity with liquid sodium- potassium alloy and discrete thermosolutal source Gnanasekaran M., Satheesh A. WOS 1521-0634
47 Sliding wear behaviour of micro-sized Kota stone dust reinforced epoxy composites using Taguchi method and Grey Wolf optimisation algorithm Gupta G., Rajput V., Ayachit B., Satpathy M.P., Pati P.R., Mishra V., Agrawal A. WOS 0954-4062
48 Improvement Of Formability And Surface Finish Of Cupro-Nickel (70/30) Alloy During Single Point Incremental Forming Process Using Chrome Steel Laser Ablated Ball Prasad M.A., Narayanan C.S., Varatharajulu M., Pandivelan C. WOS 1793-6667
49 Microstructure and Mechanical Properties of 0.18%-C Steel Samples Processed Through Five Different Heat Treatment Techniques Kulkarni A.R., Raju P.V., Sarma P.P., Dewangan S., Selvaraj S.K. SCOPUS 2250-2130
50 Rational design of different interfacial evaporators for solar steam generation: Recent development, fabrication, challenges and applications Gnanasekaran A., Rajaram K. WOS 1364-0321
51 A comprehensive review on the utilization of hydrogen in low temperature combustion strategies: Combustion, performance and emission attributes Rameez P.V., Mohamed Ibrahim M. WOS 1743-9671
52 A comprehensive review of Trinitor components: A sustainable waste heat recovery polygenerative system for diesel vehicles Duraivel B., Shaik S., Bansal R., Khanda S.D., Patel D., Natarajan M., Saleel C.A., Jilte R.D., Abulut Ü. WOS 1588-2926
53 A comprehensive review of Gum metal's potential as a biomedical material Kanapaakala G.R., Subramani V. WOS 1464-4207
54 Enhancing biogas generation from lignocellulosic biomass through biological pretreatment: Exploring the role of ruminant microbes and anaerobic fungi Tamilselvan R., Immanuel Selwynraj A. WOS 1075-9964
55 Thermal Analysis and Cooling Strategies of High-Efficiency Three-Phase Squirrel-Cage Induction MotorsA Review Konda Y.R., Ponnaganti V.K., Reddy P.V.S., Singh R.R., Mercorelli P., Gundabattini E., Solomon D.G. WOS 2079-3197
56 Analyzing the performance of a parabolic trough solar collector with advanced techniques adopted in the absorber- a review Bhattacharya K., Paradeshi S., Karthik M., Sakthiraja V.R., Bibin B. S., Edison G. WOS 2631-8695
57 ChatGPT or LLM in next-generation drug discovery and development: pharmaceutical and biotechnology companies can make use of the artificial intelligence-based device for a faster way of drug discovery and development Pal S.; Bhattacharya M.; Islam M.A.; Chakraborty C. WOS 1743-9191
58 Optimization of Printing Process Variables and the Effect of Post-Heat Treatments on the Mechanical Properties of Extruded Polylactic Acid Aluminum Composites Ganapathy S.B.; Sakthivel A.R.; Kandasamy J.; Khan T.; Aloufi M. WOS 2073-4360
59 Effect of e-waste nanofillers on the mechanical, thermal, and wear properties of epoxy-blend sisal woven fiber-reinforced composites Immanuel Durai Raj J.; Durairaj R.I.B.; John Rajan A.; Barmavatu P. WOS 2191-9550
60 Thermal and structural analysis of laser beam machining process on a Dual Phase 780 (DP780) workpiece Mishra R.; Aneesh T.; Hotta T.K.; Mohanty C.P.; Shaik S.; Gupta M. WOS 0129-1831
61 Road segment and driving schedule effects in real-time operation on electric vehicle performance and operating cost analysis Gurusamy A.; Ashok B. WOS 0954-4070
62 Optimization of Cutting Parameters for Hard Boring of AISI 4340 Steel Using Signal-to- Noise Ratio, Grey Relation Analysis and Analysis of Variance Gunaraj L.; Paul S.; Jazeel M.; Sudhagar E.; Thankachan T. WOS 1587-379X
63 Experimental and numerical analysis of vortex generators designed for utility vehicles Chidambaram R.K.; Kanna R.; Gopal P.; Arumugam S.K. WOS 1231-0956
64 A Comparative Study of Fuel Filterability, Performance, and Emission Characteristics in CI Engine Fuelled with a Dual Biodiesel Mixture Blended with Conventional Diesel Musthafa B.; Asokan M.A. WOS 0361-5219
65 Design and Analysis of Light Weight Vehicle Suspension System Vardhan G.H.; Yeshwanth A.M.; Isaac S.; Raghuraman D.R.S. SCOPUS 0975-3060
66 Influence of Wire Fin on the Performance of Heat Exchanger used in the Joule Thomson Refrigerator Kruthiventi S.S.; Nandhanagopal G.R.; Rao Y.V.H.; Kumar P.K. SCOPUS 0975-3060
67 LiDAR Sensor Perception System for Self- Driving Cars Tirumalapudi R.; Vedaraj I.S.R. SCOPUS 0975-3060
68 Performance and Emissions Analysis of Juliflora Biodiesel Blends in Conventional and Low Heat Rejection Engines with Nano TiO2 Coated Cylinder Reddy S.V.K.; Premkartikkumar S.R. SCOPUS 0975-3060
69 AI-enabled ChatGPT or LLM: a new algorithm is required for plagiarism-free scientific writing Pal S., Bhattacharya M., Islam M.A., Chakraborty C. WOS 1743-9191
70 AI-enabled ChatGPT's carbon footprint and its use in the healthcare sector: a coin has two sides Chakraborty C., Pal S., Bhattacharya M., Islam M.A. WOS 1743-9191
71 Local centric energy estimate model for clean and affordable power generation in a solar integrated passenger vehicle Pochont N.R., Sekhar Y R. WOS 0960-1481
72 Alumina and titanium nanoparticles to diesel Guizotia abyssinica (L.) biodiesel blends on MFVCR engine performance and emissions Abishek M.S., Kachhap S., Rajak U., Verma T.N., Singh T.S., Shaik S., Cuce E., Alwetaishi M. WOS 2213-1388
73 Characterization of cassia fistula seed and shell co-pyrolysis yield optimization by response surface methodology and compositional analysis Arumugam D.B., Ganesan M.C. WOS 1744-3598
74 Multi-objective optimization and analysis of chemical kinetics properties: Exploring the impact of different hydrogen blending ratios on LPG and methane-air mixtures Aravindan M., Praveen Kumar G., Arulanandam M.K., Murali S., Sheoran N., Waykole N., Muthaiah R., Sharma P. WOS 0196-8904
75 Effect of load and sliding velocity on wear behaviour of magnesium AZ91D composites reinforced with Ca2SiO4 at ambient temperature P K., Kandasamy J. WOS 0301-679X
76 Investigation on enhancement of filler dispersion and prediction of mechanical behavior of hexagonal boron nitride/epoxy nanocomposites through machine learning and deep learning models Varughese J.J., Sreekanth M.S. WOS 0967-3911
77 Influence of ZnO/MWCNTs based hybrid electrodes for boosting the performance of photovoltaic and supercapacitor devices Eswaramoorthy N., Rajendran S., Arjun Kumar B., Nallusamy S., Rengasamy M., Selvaraj Y., Sangaraju S., Krishnan T., Kumaresan G., Rajaram K. WOS 0254-0584
78 Different energy storage techniques: recent advancements, applications, limitations, and efficient utilization of sustainable energy Kumar R., Lee D., A bulut Ü., Kumar S., Thapa S., Thakur A., Jilte R.D., Saleel C.A., Shaik S. WOS 1588-2926
79 Compatibility Effects of Waste Cooking Oil Biodiesel Blend on Fuel System Elastomers in Compression Ignition Engines Venkatesan E.P., Krishnaiah R., Prasad K., Medapati S.R., Sree S.R., Asif M., Khan S.A., Linul E. WOS 2470-1343
80 Multicriteria Decision-Making Technique for Choosing the Optimal Ammonia Energy Share in an Ammonia-Biodiesel-Fueled Reactivity-Controlled Compression Ignition Engine Ramachandran E., Krishnaiah R., Vellore Gangadharan S., Perumal Venkatesan E., Chandramurthy S.R., Medapati S.R., Shaik S., Saleel C.A., Alwetaishi M. WOS 2470-1343
81 Cobot selection using hybrid AHP-TOPSIS based multi-criteria decision making technique for fuel filter assembly process C S., Subramaniam S.K. WOS 2405-8440
82 An innovative pulsed current arc welding technology for armor steel: Processes, microstructure, and mechanical properties Sathish Kumar K., Arivazhagan N. WOS 2352-4928
83 Mechanical, electrochemical corrosion, and high-temperature oxidation properties of stir-cast and heat-treated AZ80 magnesium alloy Pargavi B S., Todkar U., Dassani S., Somasundaram M., Muthuchamy A., Annamalai A.R. WOS 2352-4928
84 Mechanical Property Comparison of Geopolymer Brick Dried by Electrical and Passive Solar Devices with Phase Change Material (Paraffin Wax) Ashok Kumar J., Muthuvel S., Issac Selvaraj R.V., Ramoni M., Shanmugam R., Pandian R.S. WOS 2227-9717
85 Effect of interpass temperature on austenite ferrite ratio of wire arc additive manufactured 2507 Super Duplex Stainless Steel Prathivraj S., Oyyaravelu R. WOS 0167-577X
86 Development and testing of silica gel with graphite powder composite adsorbent for cooling applications Satheeshkumar P., Immanuel Selwynraj A. WOS 0167-577X
87 Nonlocal nonlinear higher-order finite element model for static bending of curved nanobeams including graphene platelets reinforcement Manickam G., Polit O., Mohamed H., Gupta P. WOS 1537-6494
88 A numerical study of wave baffles on sloshing reduction of rectangular containers under combined excitation V R.R., Palanisamy P. WOS 1537-6494
89 Comparison of ML Algorithms and Neural Networks on Fault Diagnosis of a Worm Gear Thamba N.B., Vanapalli V.T., Duraiswamy R.P., Sonnathi N., Illuri S.S. WOS 2523-3939
90 Causal analysis of the challenges to electric vehicles adoption using GINA: Implications to emerging economies Suresh Kumar P., Shriram R.G., Rajesh R., Rammohan A. WOS 2213-624X
91 Arc-welded armour steel: A tailored and comparative study of its microstructure and mechanical properties Sathish Kumar K., Arivazhagan N. WOS 1464-4207
92 Investigation and optimization of multiple objectives by hybrid evolutionary algorithms for turning of Nimonic 80A under nano MQL environment Arunkumar E., Devendiran S. WOS 2374-0698
93 Numerical analysis of turbulent flow characteristics with the influence of speed ratio in a double-sided cavity Gnanasekaran M., Satheesh A. WOS 2215-0161
94 CoCAT: a new similarity coefficient for solving the machine-part cell formation problem Pichandi R., Gupta N.S., Rajendran C. WOS 0973-7677
95 Influence of Fuel Filterability, Performance, and Emission Characteristics of Dual Biodiesel Mixture with Diesel Blends in Compression Ignition Engine Musthafa B., Asokan M.A. WOS 2146 - 9067
96 Effect of Al2TiO5 Particle on the Temperature Distribution of Friction Stir Welded Dissimilar Aluminium Composites Using Response Surface Methodology Senthilraj K., Rajamurugan G. WOS 0975-1645
97 Effects Of High Entropy Alloys Coating (HEAC) And Their Property Evaluation Balaji V., Xavior A.M. WOS 2708-9975
98 Effect of Heat Treatment on Wire + Arc Additive Manufactured Aluminum 5356 Alloy: Mechanical Properties and Microstructure Correlation Harshavardhana N., Sivam S.P.S.S., Savio R.R., Honymon A., Apramayan V., Kumar G., Saxena A.K. WOS 0031-918X
99 Effect of Semi-elliptical Outer Blade-surface on the Savonius Hydrokinetic Turbine Performance: A Numerical Investigation Babu G.V., Patel D.K. WOS 1735-3645
100 Hybrid thermal desalination systems for sustainable development A critical review Rajesh S., Chiranjeevi C. WOS 0038-092X
101 From machine learning to deep learning: Advances of the recent data-driven paradigm shift in medicine and healthcare Chakraborty C., Bhattacharya M., Pal S., Lee S.-S. WOS 2590-2628
102 A comprehensive review on the machining and joining characteristics of natural fiber- reinforced polymeric composites Varma M., Chandran S., Vijay Kumar V., Suyambulingam I., Siengchin S. WOS 0967-3911
103 Powder Bed Fusion 3D Printing in Precision Manufacturing for Biomedical Applications: A Comprehensive Review Joshua R.J.N., Raj S.A., Hameed Sultan M.T., ukaszewicz A., Józwik J., Oksiuta Z., Dziedzic K., Tofil A., Shahar F.S. WOS 1996-1944
104 ChatGPT or LLMs can provide treatment suggestions for critical patients with antibiotic-resistant infections: a next- generation revolution for medical science Chakraborty C., Pal S., Bhattacharya M., Islam M.A. WOS 1743-9191
105 Experimental study on effect of mild steel scrap vertical insert in charging and discharging process of NaNO3:KNO3 phase change material Jeyaseelan T.R., Vigneshwaran P., Saboor S., Kumar D.S., Saxena K.K., Ar c M. WOS 2352-152X
106 Vibration analysis using wavelet transformation technique and performance characteristics of a diesel engine fueled with tamarind biodiesel- diesel blends and diverse additives Asokan M.A., Prabu S.S., Khalife E., Sanjey K.A., Prathiba S. WOS 0360-5442
107 Experimental investigation, ANN modeling, and TOPSIS optimization of gasoline- alcohol blends for minimizing tailpipe emissions of a motorcycle Bathala R., G H., Rajkumar S., S D.A., Jeyaseelan T. WOS 0360-5442
108 Double-diffusive mixed convection in an inclined square cavity filled with nanofluid: A numerical study with external magnetic field and heated square blockage effects Devi N.R., Gnanasekaran M., Satheesh A., Kanna P.R., Taler J., Kumar D.S., Taler D., Sobota T. WOS 2214-157X
109 Experimental investigation and gray relational optimization of engine parameters to improve the output characteristics of an ammonia biodiesel powered dual fuel combustion engine Elumalai R., Sumathy S., K R., Akhtar M.N., P V E., Khan S.A., Gupta M.S., Asif M. WOS 2214-157X
110 Experimental investigations on bi- symmetrical web flow water based photovoltaic-thermal (PVT) system: Energy, exergy, and entropy (3-E) analysis Tirupati Rao V., Raja Sekhar Y., Ar c M., Ralph Pochont N., Reddy Prasad D.M. WOS 0038-092X
111 Natural convective solar dryer powered by stepped fin plate integrated trough array solar air heater for agricultural produce preservations Prakash R., Kamatchi R. WOS 0038-092X
112 Computational and Chemical Kinetics Analysis of Hydrogen-Blended LPG for Domestic Cook Stove Burners Aravindan M., Madhesh K., Praveen Kumar G., Arulanandam M.K., Murali S., Sheoran N., Waykole N., Muthaiah R., Sharma P., Anand A. WOS 2590-1745
113 Combustion performance and emission characteristics of aloevera diesel emulsified fuel in a DI diesel engine Manikandan R., Raja T., Raja K.V., Suresh G., Vezhavendhan R., Kumaresan G., Ganesamoorthy R. WOS 0944-1344
114 Systematic inspection on the interplay between MoNa-induced sodium and the formation of MoSe2 intermediate layer in CIGSe/Mo heterostructures Za abar F.I., Doroody C., Soudagar M.E.M., Chelvanathan P., Abdullah W.S.W., Zuhd A.W.M., Cuce E., Saboor S. WOS 0944-1344
115 ChatGPT's scorecard after the performance in a series of tests conducted at the multi- country level: A pattern of responses of generative artificial intelligence or large language models Bhattacharya M., Pal S., Chatterjee S., Alshammari A., Albekairi T.H., Jagga S., Ige Ohimain E., Zayed H., Byrareddy S.N., Lee S.-S., Wen Z.-H., Agoramoorthy G., Bhattacharya P., Chakraborty C. WOS 2590-2628
116 Improving changeover techniques in apparel manufacturing through single minute exchange of die: implications for benchmarking Ali S.M., Haque M.N., Sarker M.R., Kandasamy J., Vlachos I. WOS 1463-5771
117 A novel two-phase trigonometric algorithm for solving global optimization problems Baskar A., Xavior M.A., Jeyapandiarajan P., Batako A., Burduk A. WOS 1572-9338
118 Influence of Cobalt content on the microstructure and texture evolution of hot-press sintered Tungsten nickel copper Alloy (W-Ni-Cu) Manikandan R., A. R.A. WOS 1044-5803
119 Effect of Mn addition in W-Ni-Cu heavy alloy processed through hot press sintering techniques on microstructure, microtexture and grain boundary character evolution R M., A R.A. WOS 1044-5803
120 Numerical investigation of elastic stenotic arterial blood flow with a generalized Womersley inlet condition Udupa M.C., Natarajan S., Saha S. WOS 1089-7666
121 Evaluating the flexural and vibrational response of carbon nanotube strengthened co-cured sandwich composites Dhilipkumar T., Arumugam S., Rajesh M., Venkatesan R., Sasikumar R., Al-Asbahi B.A. WOS 2233-4998
122 Environmentally Friendly Water-Based Reduced Graphene Oxide/Cellulose Nanofiber Ink for Supercapacitor Electrode Applications Nargatti K.I., Ahankari S.S., Dizon J.R.C., Subramaniam R.T. WOS 2470-1343
123 Techno-economic, energy, and exergy analyses of invasive weed gasification for hydrogen enriched producer gas production V N., D S., Alaswad A., V S V. WOS 2405-8440
124 Assessment of Adaptive Self-Learning- Based BLDC Motor Energy Management Controller in Electric Vehicles under Real- World Driving Conditions for Performance Characteristics Saiteja P., Ashok B., Mason B., Suresh Kumar P. WOS 2169-3536
125 Experimental and numerical investigation on novel three-dimensional printed bio- inspired hexagonal lattices for energy absorption and stiffness behavior Doodi R., Gunji B.M. WOS 1539-7742
126 Vibration analysis of bio-inspired sandwich composite beam under rotating environment based on the Internet of Things technology Daniel R C., Sudhagar P.E. WOS 1539-7742
127 Development of a novel autogenous double pulse tungsten inert gas welding technique for joining IN625 in concentrated solar power plants Nandhakumar S., Gokul Kumar K., Jose B. WOS 2352-4928
128 Predictive modeling of phase transformation temperatures in NiTiCu shape memory alloys: Integrating electronic factors through artificial neural network Radhamani R., Balakrishnan M. WOS 2352-4928
129 Experimental investigation of vibro-acoustic noise analysis in the switched reluctance motor through transient model-based multiphysics analysis for electric vehicles applications Saiteja P., Ashok B. WOS 0003-682X
130 Effect of post-heat treatment on the mechanical and surface properties of nylon 12 produced via material extrusion and selective laser sintering processes Balan G.S., Raj S.A., Adithya R.N. WOS 0170-0839
131 The effect of abrasive water jet peening and laser shock peening on the wear properties of direct metal laser sintered AlSi10Mg alloy Jagadesh Kumar C.M., Ganesh Karthik A.R.G., Arulvel S., Prayer Riju R., Burduk A., Jeyapandiarajan P. WOS 0167-577X
132 Enhancing shear strength in 3D printed single lap composite joints: A multi-faceted exploration of GNP integration, print orientation, utilizing artificial neural networks, and dynamic analysis Hiremath V.S., Reddy M.D., Reddy R.M., Naveen J., Chand R.P. WOS 0021-8995
133 Impact of fuel injection parameters and hydrogen enrichment on CI engine characteristics fueeled with Ceiba pentandra biodiesel Saravanan B., Asokan M.A. WOS 1556-7230
134 Experimental investigations on PVT- integrated hybrid desalination system: Energy, exergy, and economic analysis Rajesh S., Chalasani Chiranjeevi WOS 1556-7230
135 Development of Supervisory Self-Learning- Based Energy Management Controller to Control the Torque Ripples of Brushless DC Motor in Electric Vehicles Applications Saiteja P., Ashok B. WOS 1319-8025
136 Investigation on the Compressive Characteristics and Optimization of Design Parameters of a Novel Functionally Graded Cell Structure Ganapathy S.B., Sakthivel A.R. WOS 2631-6331
137 Comparison of quasi-static compression performance of FDM 3D printed truss supported double arrowhead structure with a circular node Nekin Joshua R., Aravind Raj S. WOS 1537-6494
138 Influence of Varied MWCNTs Dispersion on EMI Shielding, UV Absorption, and Surface Properties of Electroless NiP/MWCNT- Coated UHMWPE Fabric Biradar A., Kandasamy J. WOS 1229-9197
139 Experimental investigation of 3D printed bio- inspired Xylotus lattice structure for energy absorption under quasi-static axial loading conditions Ramakrishnan R., Hemanth Kumar J., Titus F., Maharshi P., Nithish R. WOS 2041-3076
140 Fog harvesting efficiency analysis of biomimicking surfaces: A review Uvarani A., Behura A.K. WOS 0954-4089
141 Comparative study on the influence of additives on interfacial adhesion strength between fibres and extruded polymer core via peel-off test Balan G.S., Aravind Raj S. WOS 2053-1591
142 New Friction Factor Correlation for Phase- Change Flow in Plate Heat Exchangers Mukkamala Y., Dirker J. WOS 0145-7632
143 Comprehensive behavior of reduced graphene oxide (rGO) reinforced plasma sprayed nanostructured WC Co coatings Srikanth A., Venkateshwarlu B. WOS 0145-7632
144 Evaluating structural strength and vibrational characteristics of silicon carbide incorporated adhesively bonded single lap joints Dhilipkumar T., Rajesh M., Sathyaseelan P., Sasikumar R., Murali A.P. WOS  
145 Exploring thermal dynamics of polyaniline- modified paraffin wax phase change material with varied PANI loadings (14% wt.) Janumala E., Govindarajan M., Reddi B.V., Manickam M., Venkatesan E.P., Saleel C.A., Alwetaishi M., Shaik S., Nur-E-Alam M., Soudagar M.E.M. WOS 0947-7411
146 Numerical Investigation on Thermal Performance of Nanofluid-Assisted Wickless Heat Pipes for Electronic Thermal Management Jose J., Hotta T.K. WOS 1948-5085
147 Thermal Analysis of Building Roofs with Latent Heat Storage for Reduction in Energy Consumption and CO2Emissions: An Experimental and Numerical Research Cuce E., Shaik S., Roy A., Arumugam C., Afzal A., Cuce P.M., Ghosh A., Alam T., Shaik S.V. WOS 1687-8094
148 ENHANCEMENT AND EXPERIMENTAL STUDY ON THERMAL BEHAVIOUR OF HEAT PIPE BASED SOLAR ABSORBER BY USING CuO NANOFLUID Thirunavukkarasu M., Selvaraj K., Chiranjeevi C., Rathinavelu V., Maguluri L.P., Obaid S.A., Alharbi S.A., Kalam M.A., Yokeswaran R. WOS 2334-7163
149 EXPERIMENTAL STUDY ON HEAT TRANSFER CHARACTERISTICS OF DIMPLED SURFACE THERMOSYPHON WITH Al2O3 NANOFLUID RAJESWARAN S.S., GOVINDASAMY K., PANDIARAJ S., RAJARAM K. WOS 2334-7163
150 Effect of Cr on the high-temperature corrosion of dissimilar AISI 904L and Inconel 625 joints employed in the coal-fired thermal power plant tubes Senthur Prabu S., Muthu S.M., Sujai S., Devendranath Ramkumar K., Arunkumar D.T., Beemkumar N. WOS 0960-3409
151 Experimental studies on performance and emission measures of a 4-stroke compression ignition engine using palm bio- diesel blended with N-butanol Behera B.N., Hotta T.K. WOS 2307-1877
152 Optimized Distance-Based Algorithm for Cloud Space - Tourist Route Recommendation for Heritage Town, Pondicherry, India Lakshmanan L., Madhumathi A., Pandian R S., Subhashini S., Paraman S., Velmurugan K., Di Bona G. SCOPUS 1563-5147
153 Molecularly Imprinted Polymers: Shaping the Future of Early-Stage Bone Loss Detection A Review Agnishwaran B., Manivasagam G., Udduttula A. WOS 2470-1343
154 Development of high entropy alloys (HEAs): Current trends V B., M A.X. WOS 2405-8440
155 Advancements in Battery Cooling Techniques for Enhanced Performance and Safety in Electric Vehicles: A Comprehensive Review Rallabandi S., Isaac Selvaraj R.V. WOS 2194-4288
156 Sustainable recycling of polymers: a comprehensive review Kolluru S., Thakur A., Tamakuwala D., Kumar V.V., Ramakrishna S., Chandran S. WOS 0170-0839
157 Recent Advancements in Fault Diagnosis of Spherical Roller Bearing: A Short Review Senthilnathan N., Babu T.N., Varma K.S.D., Rushmith S., Reddy J.A., Kavitha K.V.N., Prabha D.R. WOS 2523-3939
158 A comparative assessment of microbial biodiesel and its life cycle analysis E S.S.A., Sharma Y., J R., Shankar V. WOS 0015-5632
159 Mechanical and ballistic performance of ramie fiber-reinforced polymer composites: A review Thiyagu C., Narendrakumar U. WOS 0954-4062
160 Dynamic mechanical characteristics of natural fiber hybrid composites, bio composites and nano composites -a review Krishnasamy P., Rajamurugan G., Belaadi A., Sasikumar R. WOS 2631-8695
161 Permanent magnet assisted synchronous reluctance machine for drives of light vehicles Wardach M., Palka R., Prajzendanc P., Gundabattini E., Cierzniewski K., Pstrokonski R., Cichowicz M., Wiszniewski M., Pacholski S., Singh Rassiah R., Gnanaraj Solomon D. WOS 2213-1388
162 Optimizing novel green hydrogen production from solar and municipal solid waste: A thermo-economic investigation with environmental comparison between integrated low temperature power cycles Aravindan M., Praveen Kumar G. WOS 0957-5820
163 Effects of nanofillers on the physical, mechanical, and tribological behavior of carbon/kenaf fiber-reinforced phenolic composites Bilvatej B., Naveen J., Norrrahim M.N.F., Knight V.F., Karthikeyan N., Chandrasekar M., Loganathan T.M., Anand S.P. WOS 2191-9089
164 Numerical and experimental investigation of performance and emission characteristics of hydrogen enrichment with prosopis juliflora biodiesel in CI engine using RSM and ANN optimization Musthafa B., Asokan M.A. WOS 0360-3199
165 Experimental investigation of performance, emission, and combustion characteristics of a variable compression ratio engine using waste cooking vegetable oils blended with diesel Behera B.N., Hotta T.K. WOS 2214-157X
166 Sustainable assessment of low viscous biofuel for compression ignition engine using wear debris analysis Tribological investigation Harshavardhan Reddy K., Kasianantham N. WOS 2214-157X
167 Glazing systems utilizing phase change materials: Solar-optical characteristics, potential for energy conservation, role in reducing carbon emissions, and impact on natural illumination Shaik S., Vishnu Priya A., Maduru V.R., Rahaman A., Ar c M., Kontoleon K.J., Li D. WOS 0378-7788
168 Numerical investigation on the impact of circumferentially varying temperature on the buoyancy and heat transfer characteristics of supercritical CO2 natural circulation loop Boopalan V., Kumar Arumugam S., Rajesh Kanna P. WOS 1359-4311
169 Performance assessment of a geometrical modification on thermosyphon heat pipe with the assistance of novel convergent- divergent truncated cones for energy recovery systems Sakthi Priya M., Sakthivadivel D. WOS 1359-4311
170 Thermal degradation and fire retardant behaviour of natural fibre reinforced polymeric composites- A comprehensive review Hiremath V.S., Reddy D.M., Reddy Mutra R., Sanjeev A., Dhilipkumar T., J N. WOS 2214-0697
171 A hybrid approach of NiP coating and STF impregnation of UHMWPE fabric for conductive soft body armor Biradar A., Arulvel S., Kandasamy J. WOS 2214-0697
172 Enhancing shear strength of single lap composite adhesive joint with graphene nano-particles and Z-pins reinforcement through co-curing technique Venugopal A., Sudhagar P E. WOS 0301-679X
173 Driving an ecological transformation: unleashing multi-objective optimization for hydrogenated compressed natural gas in a decarbonization perspective Marimuthu A., Govindasamy P.K. WOS 0944-1344
174 Optimizing soybean biofuel blends for sustainable urban medium-duty commercial vehicles in India: an AI-driven approach Rajak U., Chaurasiya P.K., Verma T.N., Dasore A., A bulut Ü., Meshram K., Saleel C., Saboor S., Cuce E., Mian Z. WOS 0944-1344
175 Guest editorial: Emerging trends in supply chain engineering towards global sustainability Kandasamy J., Badurdeen F., Rajapakshe T. WOS 2398-5364
176 Dry milling of stir-cast and heat-treated EV31A magnesium alloy: An experimental investigation based on the multi-criteria optimization method Somasundaram M., Dinesh Kumar K., NarendraKumar U., Raja Annamalai A. WOS 0263-2241
177 Characterization of electrical conductivity and dielectric properties of electroless NiP/rGO composite coated hemp fiber with various weight% of rGO and coating duration Krishnasamy P., Mylsamy G., Arulvel S., Rajamurugan G., Gadekar A. WOS 2211-3797
178 Shear properties and failure mechanisms of adhesive bonded composite joint: Effect of glass particle reinforcement Balaji S., Rajesh M. WOS 0967-3911
179 Performance analysis of a Savonius hydrokinetic turbine with aerodynamic blade shape and different overlap ratios: A numerical flow-driven approach Babu G.V., Patel D.K. WOS 0029-8018
180 Exploration of Voids, Acoustic Properties and Vibration Damping Ratio of Cyperus Pangorei Rottb Fiber and Ramie Fiber Reinforced with Epoxy Resin Hybrid Composites Kanniyappan S., Selvaraj S.K. WOS 2073-4360
181 Green energy revolution: A unique approach for energy forecasting and optimization towards sustainable energy planning and social development Dsilva Winfred Rufuss D., Sonu Ashritha K.S., Suganthi L. WOS 1387-585X
182 Effect of operating regimes on the heat transfer and buoyancy characteristics of supercritical CO2 natural circulation loop - A numerical study Boopalan V., Kumar Arumugam S., Rajesh Kanna P. WOS 2451-9049
183 Solar powered cascade system for sustainable deep-freezing and power generation - exergoeconomic evaluation and multi-objective optimization for tropical regions Karthikeyan B., Praveen Kumar G., Saravanan R., Coronas A., Narayanan R., Girimurugan R. WOS 2451-9049
184 Experimental investigation of turning AISI D2 steel using sillimanite (Al2SiO5) Srivathsa S.S.A., Chaudhari J.A., Muralidharan B. WOS 1042-6914
185 Comprehensive stratified K-fold machine learning for surface roughness prediction with 3D printed electrodes: Analyzing dielectric variability and heat treatment effects Rakshaskar R., Chidambaram K. WOS 2352-4928
186 Influence of pulsed current GTAW-WAAM process parameters on the single layer bead geometry and multi bead multi-layer deposition of a nickel-based superalloy Kumar M.D.B., Arivazhagan N., Tofil S., Andersson J., Kozak J., Manikandan M. WOS 2352-4928
187 A novel nanosecond pulsed laser textured moat configurations for enhancing surface wettability, corrosion and tribology behaviour of Ti6Al4V implant material Velayuthaperumal S., Radhakrishnan R. WOS 2352-4928
188 Service life estimation of electric vehicle lithium-ion battery pack using arrhenius mathematical model Rammohan A., Wang Y., Kannappan S S., Kumar P S., Ashok B., Kotb H., AboRas K.M., Yousef A. WOS 2296-598X
189 Numerical Analysis of Flow-Induced Transverse Vibration of a Cylinder with Cubic Non-Linear Stiffness at High Reynolds Numbers Sadasivan S., Litak G., G ca M.J. WOS 1996-1073
190 Biogas purification by CO2 removal using facilitated transport mechanism of cellulose nanocrystals/polyvinyl alcohol layered hollow fiber membranes Nithin Mithra S., Ahankari S.S. WOS 1097-4628
191 Synthesis and characterization of myristic acid - infused Al2O3/CuO/MWCNT nanocomposites for energy storage and cooling applications Venkatakrishnan P., Palanisamy P. WOS 1402-4896
192 The impact of successive laser shock peening on surface integrity and residual stress distribution of laser powder-bed fused stainless steel 316L Haribaskar R., Kumar T.S. WOS 1402-4896
193 Sustainable energy enhancement strategy from Chlorella vulgaris microalgae biomass resource Shenbagamuthuraman V., Kasianantham N. WOS 1556-7230
194 Adsorptive removal of Cu(II) ions from aqueous solution using Teff (Eragrostis tef) hay based magnetized biocarbon: RSM-GA, ANN based optimization and kinetics aspects Sundramurthy V.P., Varadharajan V., Wilson V.H., Jose S., Manoharan S., Alharbi N.S., Khaled J.M., Kandasamy B., Palanisamy G. WOS 0942-9352
195 Enhancing crashworthiness characteristics of modified hexagonal honeycomb structural panels through stretching and bending of ribs Kathiresan M., Immanuel R.J., Rajamohan V. WOS 1464-4207
196 Thermal and energy analysis of a novel solar updraft tower design with divergent chimney and convergent collector concept: CFD analysis with experimental validation Cuce P.M., Saxena A., Cuce E., Kontoleon K.J., Oztekin E.K., Shaik S., Guo S. WOS 1748-1325
197 Sustainability of Existing Phase of Extruded Fiber-Reinforced Polylactic Acid under Dynamic Shock Loading Conditions Sakthi Balan G., Aravind Raj S. WOS 1544-1024
198 Impact of friction stir welding parameters and Al2TiO5 reinforcement on the mechanical, wear, and corrosion performance of dissimilar welded aluminium composite joints Senthilraj K., Rajamurugan G. WOS 1568-5616
199 A new internal cooling system for a green tubular channel investigated for tool life in Hastelloy-B3 turning for MQL medium Murali T., Devendiran S. WOS 1806-3691
200 Evaluation of Electric Vehicle Performance Characteristics for Adaptive Supervisory Self- Learning-Based SR Motor Energy Management Controller under Real-Time Driving Conditions Saiteja P., Ashok B., Upadhyay D. WOS 2624-8921
201 Effect of phase change material in cross flow and jet impingement cooling techniques used in heat sink for electronics application Parthipan D., Dharmalingam B., Sankaran S., Rajagopal D. WOS 1521-0634
202 Optimizing extreme manufacturing framework: a secure and efficient 3D printing integration framework Moulika G., Palanisamy P. WOS 2631-8695
203 Case studies on the applications of the artificial bee colony algorithm Devadason J.R., Hepsiba P.S., Solomon D.G. WOS 0256-2499
204 Laminar flow and convective heat transfer characteristics of plain and wavy wall cross confined circular cylinder Rajagopal D. WOS 1521-0626
205 Smart Glazing Systems vs Conventional Glazing: A Comprehensive Study on Temperature Control, Daylighting, and Sustainability Qahtan A.M., Shaik S., Alwadai Y.A., Alhamami S., Alawlaki A.S., Alyami M.H., Kodati J.A. SCOPUS 1743-7601
206 Coupled Taguchi-Pareto-Box Behnken Design-Grey Wolf Optimization Methods for Optimization Decisions when Boring IS 2062 E250 Steel Plates on CNC Machine Abdullahi Y.U., Oke S.A., Rajan J., Jose S., Adedeji W.O. SCOPUS 2730-4175
207 Optimization of Wire Electrical Discharge Machining Process Parameters in AZ91 Magnesium Alloy Using Taguchi-Based Fuzzy Analytic Hierarchy Process (TFAHP) Method Ikedue M.C., Rajan J., Jose S., Oke S.A., Adedeji W.O. SCOPUS 2730-4175
208 Optimization of temperature distribution in building envelopes of Ahmedabad region using nano-encapsulated phase change material J. D., Hotta T.K. SCOPUS 2666-1233
209 Influence of in-situ process parameters, post heat treatment effects on microstructure and defects of additively manufactured maraging steel by laser powder bed fusion A comprehensive review Raghuraman V., Sampath Kumar T. WOS 1402-4896
210 Systematic Review on Fault Diagnosis on Rolling-Element Bearing Pandiyan M., Babu T.N. WOS 2523-3939
211 A review on the fused deposition modelling of fibre-reinforced polymer composites: Influence of process parameters, pre- processing and post processing techniques Naveen Kumar C., Venkatesan S. WOS 1464-4207
212 A critical review on biomaterials using powder metallurgy method Abraham A.M., Venkatesan S. WOS 2631-8695
213 Chitosan-based aerogels: A new paradigm of advanced green materials for remediation of contaminated water Paul J., Qamar A., Ahankari S.S., Thomas S., Dufresne A. WOS 0144-8617
214 A Study on the Residual Stresses in Tungsten Inert Gas and Laser Welded Nitinol Superelastic Alloy Aayush S., Giri A., Anil Kumar S., Kumar R., Mahapatra M.M. WOS 1544-1024
215 Material characterization of graphene and boron nitride for composites reinforcement Madhankumar A., Anthony Xavior M. WOS 2631-8695
216 Wear And Frictional Behaviour Of Additive Manufactured SS 316L Through Powder Bed Fusion Vinothraj U.T., Xavior M.A. WOS 2708-9975
217 Graphene reinforced ceramic matrix composite (GRCMC) - state of the art Madhankumar M.A., Anthony Xavior A.X. WOS 2631-8695
218 Tribological performance of functional coated fiber reinforced additively manufactured polymer composite Balan G.S., Aravind Raj S. WOS 2631-8695
219 Development of thermal barrier coating on single crystal superalloy CMSX-4 by two- source evaporation EB-PVD and hot corrosion performance of the coating in a simulated aero-engine environment Vaiyapuri S.K., Moganraj A., Nowotnik A., Mrowka- Nowotnik G. WOS 0257-8972
220 High temperature dry sliding wear behaviour of selective laser melted Ti-6Al- 4V alloy surfaces Praveenkumar K., Vishnu J., Samuel S C., Gopal V., Arivarasu M., Lackner J.M., Meier B., Karthik D., Suwas S., Swaroop S., Prashanth K.G., Yadav M.K., Manivasagam G. WOS 0924-0136
221 A comparative analysis of compressive and wear failure of laser-powder bed fused Stainless Steel 316L produced with different hatch spacing in stripe and contour patterns Prayer Riju R., Arulvel S. WOS 1350-6307
222 Thermophysical characterization and reliability analysis of binary composite nano doping on stearic acid-acetamide eutectic PCM C N D., Behura A.K. WOS 2589-2347
223 Development and reliability assessment of nano-enhanced novel organic eutectic mixtures as phase change materials for latent heat energy storage Deepak C.N., Behura A.K. WOS 1588-2926
224 Development and preparation of novel nano-enhanced organic eutectic phase change materials for low-temperature solar thermal applications C N D., Behura A.K. WOS 1556-7036
225 PERFORMANCE CHARACTERIZATION, PRICE EVALUATION, AND ESTIMATION OF EMISSIONS OF INTERNAL COMBUSTION ENGINES WITH FUEL ADDITIVES Jana J., Sinha A., Adithya B., Jain R., Poddar D., Bibin B.S., Behura A.K., Gundabattini E. SCOPUS 2150-363X
226 Viscoelastic modelling and analysis of two- dimensional woven CNT-based multiscale fibre reinforced composite material system Swain A., Palani V., Francis S., Thomas B., Roy T. SCOPUS 2731-9229
227 Establishment of electric two-wheeler driving cycle for energy economy and life cycle assessment under Indian Tier-2 city driving environments Gurusamy A., Ashok B. WOS 2213-1388
228 Investigation of Model-Based Multiphysics Analysis on Vibro-Acoustic Noise Sources Identification In Brushless DC Motor for Electric Vehicles Saiteja P., Ashok B. WOS 2523-3939
229 Suitability Study of Biofuel Blend for Light Commercial Vehicle Application under Real- World Transient Operating Conditions Saiteja P., Ashok B. WOS 1946-3944
230 Parametric Optimization of Selective Laser Melted 13Ni400 Maraging Steel by Taguchi Method Patil V.V., Mohanty C.P., Prashanth K.G. WOS 2504-4494
231 Maximizing biogas production from leftover injera: influence of yeast addition to anaerobic digestion system Sundramurthy V.P., Sundaram S., Goel M., Mohamed Baseer A.R., Wilson V.H., Jose S., Chinnasamy G., Manoharan S. WOS 0942-9352
232 Characterization of Al-Si Alloy Reinforced with B4C and TiO2 Nanoparticles Dinesh Kumar P.K., Darius Gnanaraj S. WOS 1876-9918
233 Spin-Coating Fabrication Method of PDMS/NdFeB Composites Using Chitosan/PCL Coating Powojska A., Mystkowski A., Gundabattini E., Mystkowska J. WOS 1996-1944
234 Numerical and experimental investigation on vibration characteristics of bio-inspired architected gyroid core in composite sandwich beams Gunasegeran M., Edwin Sudhagar P., Vasudevan M., Ramamoorthy M., Barathan V., Raja H., Sampath Kumar T. WOS 1537-6494
235 Variable angle tow-steered curvilinear fibres-based rotating arbitrarily layered composite beams- a coupled vibration of chordwise-flapwise-torsional motions by higher-order beam theory Balaji L., Manickam G., Polit O., Haboussi M., Dineshkumar S. WOS 0263-8223
236 NUMERICAL INVESTIGATION AND TAGUCHI OPTIMIZATION CONCERNING THERMAL PERFORMANCE OF HCCI ENGINES WITH MULTISTAGE DIRECT INJECTION AND MODIFIED GEOMETRY Gupta G., Mishra A., Kulshrestha S., Patel F.M., Tiwari N., Sharma A. SCOPUS 2150-363X
237 In-vitro fretting tribocorrosion and biocompatibility aspects of laser shock peened Ti-6Al-4V surfaces Praveenkumar K., Vishnu J., Raheem A., Gopal V., Swaroop S., Suwas S., Shankar B., Manivasagam G. WOS 1984-2024
238 Modeling and simulation of a double DQN algorithm for dynamic obstacle avoidance in autonomous vehicle navigation Sivayazi K., Mannayee G. SCOPUS 2772-6711
239 Microstructural and Mechanical Properties of Nickel-Based Superalloy Fabricated by Pulsed-Mode Arc-Based Additive Manufacturing Technology Madesh R., Kumar K.G. WOS 1598-9623
240 Comparative study on tensile and morphological properties of resin and rice husk reinforced polymer composite gyroid lattice structures Chouhan G., Bidare P., Murali G.B. WOS 2631-8695
241 Enhancing biogas production through photocatalytic pretreatment of rice straw co-digested with cow dung and food waste using a novel g-C3N4/SiO2/bentonite catalyst Tamilselvan R., Immanuel Selwynraj A. WOS 0957-5820
242 Adopting quality management practices in the industry 4.0 era: an investigation into the challenges Fadilasari D.P., Roy Ghatak R., Garza-Reyes J.A., Joshi R., Kandasamy J. WOS 1478-3363
243 Optimization methods in powder metallurgy for enhancing the mechanical properties: a systematic literature review Lingam D., Ananthanarayanan R., Jeevanantham A.K., Seenivasagam D.R. WOS 2631-8695
244 Combined effect of grooves and nanoflower structured Co3O4 coating on bamboo wood for highly efficient solar steam generation at indoor and outdoor conditions Rengasamy M., Gnanasekaran A., Eswaramoorthy N., Basker I., Rajaram K. WOS 0944-1344
245 Multi-Strategical Thermal Management Approach for Lithium-Ion Batteries: Combining Forced Convection, Mist Cooling, Air Flow Improvisers and Additives Mohanan A., Chidambaram K. WOS 2032-6653
246 Enhancing surface integrity and performance of EDM with sustainable dielectrics and electrode modifications Rakshaskar R., Kannan C. WOS 2631-8695
247 Coupled modal characteristics of a bladed rotor bearing system under aerodynamic and rotor excitations: Modelling and numerical study Sachin D., Mallikarjuna Reddy D., Kishore S., Patnaik B.V.A. WOS 1741-2986
248 Vibration assessment of dual core sandwich beam with a biomimetic lamellar honeycomb core and MWCNT reinforced facesheets Thanikasalam N., Ramamoorthy M. WOS 1539-7742
249 Development of Sustainable Biofuel from Seed Waste Using Pyrolysis and Its Sustainability in the Compression Ignition Engine Application Baskaran K., Mohan C.G. WOS 1521-0537
250 A comparative study on ML algorithms and ANN on fault diagnosis of a two-stage helical gearbox Narendiranath Babu T., Kothari A.J., Rama Prabha D., Mokashe R., Kagita K.B., Raj Kumar E. WOS 1064-1246
251 Exploring the multifarious blend ratios of waste fried edible oil biodiesel/diesel/low carbon methanol in an automotive engine: An approach towards fuel characterization, experimental, and multicriteria decision making method Ananda Murugan M., Nataraj G. WOS 1944-7450
252 Progress in adhesive-bonded composite joints: A comprehensive review Karthikeyan N., Naveen J. WOS 1530-7964
253 Investigations on a Spark Ignition Engine, Part I: Fuelled With Biogas Extracted From Sewage Essuman C.B., Porpatham E. WOS 1521-0537
254 Investigations on a Spark Ignition Engine, Part II: Impact of Hydrogen Addition and Compression Ratio on a Biogas-Fuelled Engine Essuman C.B., Porpatham E. WOS 1521-0537
255 Experimental Studies on the Jatropha-Biogas Dual Fuel Engine Jayagopal S., Porpatham E., Arumugam S.K. WOS 1521-0537
256 Thermo-economic optimization of hybrid solar-biomass driven organic rankine cycle integrated heat pump and PEM electrolyser for combined power, heating, and green hydrogen applications Karthikeyan B., Praveen Kumar G., Narayanan R., R S., Coronas A. WOS 0360-5442
257 Influence of meshes on mechanical performance and stiffness of single-lap adhesive bonded composite joints Thirunavukarasu A., Sikarwar R.S. WOS 0167-577X
258 Crystallographic texture evolution in hot- press sintered tungsten heavy alloy with the effect of niobium (Nb) addition Manikandan R., Raja Annamalai A. WOS 2352-4928
259 Mechanical and tribological behaviour of Al2TiO5 particle-reinforced AA5052 composite Senthilraj K., Rajamurugan G. WOS 0250-4707
260 Dynamic and stability comparison analysis of the high-speed turbocharger rotor system with and without thrust bearing via machine learning schemes Mutra R.R., Srinivas J., Reddy D.M., Rani M.N.A., Yunus M.A., Yahya Z. WOS 1806-3691
261 Numerical Investigation of Thermohydraulic Characteristics in Supercritical CO2 Natural Circulation Loop with Spatially Varying Temperature Boopalan V., Kanna P.R., Arumugam S.K. WOS 1521-0537
262 Energy and Exergy Analysis of an Ejector Expansion Transcritical Carbon Dioxide Air Conditioning System Jose J., Kanna P.R., Arumugam S.K. WOS 1521-0537
263 Evaluating the in-plane strength and vibrational behaviour of z-pinned fibre- reinforced composites Rajesh M., Venkatesan R., Murali A.P., Al-Asbahi B.A., Hiremath V.S., Sasikumar R., Dhilipkumar T. WOS 2520-8179
264 Biodegradation of Polyurethane by Fungi Isolated from Industrial Wastewater A Sustainable Approach to Plastic Waste Management Rajan A., Ameen F., Jambulingam R., Shankar V. WOS 2073-4360
265 Water splitting via electrocatalysis and photocatalysis: Engineering stumbling blocks and advancements Singh D., Kumawat S., Saini A., Sonia P., Goyal A., Sravanthi G., Saxena K.K., Shaik S., Raja V., Saleel C.A., A bulut Ü. WOS 0360-3199
266 NUMERICAL SIMULATION OF TURBULENT FLOW IN A HEAT EXCHANGER EQUIPPED WITH FINS OF DIFFERENT MATERIALS AND GEOMETRIES Roy A., Sreekanth U., Ashirvadam J., Shaik S., Behura A.K., Bibin B.S. SCOPUS 2150-363X
267 Ascertaining the techno-economic feasibility of a biomass driven dual bed vapor adsorption refrigeration system operated cold storage room: An experimental and comparative approach Pon Pavithiran C.K., Sakthivadivel D. WOS 2590-1745
268 Turbulence-induced droplet grouping and augmented rain formation in cumulus clouds Gumber S., Bera S., Ghosh S., Prabhakaran T.V. WOS 2045-2322
269 Two-phase simulation of transcritical CO2 flow in nozzle and ejector using the homogeneous equilibrium model Chandran R.J., Arumugam S.K., Sadasivan S., Kanna P.R., Chen F. WOS 1588-2926
270 Microstructure and mechanical assessment of Inconel 625 and AISI 904L dissimilar joints using high-density welding technique for pressure vessels Prabu S.S., S M M., N B., Sujai S., M A., K K., Chandran P M M., Ramkumar S. WOS 0308-0161
271 Evaluation of improved tribo-performance characteristics of MoS2 functionalized MWCNTs hybrid reinforced epoxy composites for severe erosion conditions Varghese A.S., M. S. S. WOS 0301-679X
272 Optimization of 3D-printed solar evaporators for enhanced interfacial solar steam generation and beyond: Investigating surface modifications and nanocomposite coatings Rengasamy M., Eswaramoorthy N., Gnanasekaran A., G K., N G., S S., M S S., Rajaram K. WOS 2589-2347
273 Investigation on Thermal Management of 18650 Lithium-Ion Batteries Using Nano- Enhanced Paraffin Wax: A Combined Numerical and Experimental Study Vyas D., Bhatt J., Rajput A., Hotta T.K., Rammohan A., Raghuraman D.R.S. WOS 1319-8025
274 Microstructural, mechanical and tribological characteristics of reduced graphene oxide (rGO) reinforced nanostructured Al2O3- 13wt. %TiO2 coatings Srikanth A., Bolleddu V. WOS 2510-1579
275 Eco-friendly perspective of hydrogen fuel addition to diesel engine: An inclusive review of low-temperature combustion concepts Nguyen V.N., Ganesan N., Ashok B., Balasubramanian D., Anabayan K., Lawrence K.R., Tamilvanan A., Le D.T.N., Truong T.H., Tran V.D., Cao D.N., JS F.J., Varuvel E.G. WOS 0360-3199
276 Catalytic co-pyrolysis of bauhinia purpurea seed and waste medical plastics for sustainable biofuel production: Kinetic analysis and prediction modeling Arumugam D.B., Ganesan M.C. WOS 0957-5820
277 Impact of fuel injection parameters associated with partially hydrogenated Ceiba pentandra biodiesel blend on CI engine characteristics Saravanan B., Asokan M.A. WOS 0957-5820
278 Thermal comfort and heat flow characteristics of hybrid cooling systems for studio type classrooms: An experimental study Chandrashekar R., Pai A., Vivek T., Sekar S.K., Ar c M., Balaji K. WOS 0378-7788
279 Effect of antioxidants on CI engine characteristics of safflower biodiesel with varying fuel injection pressures Asokan M.A., Prabu S.S., Musthafa B., Saravanan B., Sujai S., Pote R.T., Chavan N.P., Bhor D.S. WOS 2214-157X
280 Effects of incorporating cellulose fibers from Yucca treculeana L. on the thermal characteristics of green composites based on high-density poly-ethylene: An eco- friendly material for cleaner production Ghernaout D., Belaadi A., Boumaaza M., Chai B.X., Jawaid M., Abdullah M.M.S., Krishnasamy P., Al-Khawlani A. WOS 2214-0697
281 Effect of B4C and graphene on the microstructural and mechanical properties of Al6061 matrix composites P B., M A.X. WOS 2214-0697
282 A numerical investigation of novel segmented PCM blocks filled with different phase change material cooling for Lithium- Ion battery Kumar Lokhande I., Tiwari N. WOS 1359-4311
283 Analysis and experimental investigation of powder concentration and stirring velocity on powder mixed electrical discharge machining performance with 3D printed electrodes Rakshaskar R., Chidambaram K. WOS 2590-1230
284 Unlocking clean gas with hydrogen: A combustion optimization study Aravindan M., Praveen Kumar G., Muthaiah R., Arulanandam M.K., Sheoran N., Waykole N., Sharma P., Anand A., Kalidoss S., Trivedi G. WOS 2590-1230
285 Exploring annealing-triggered phase transformation, photoluminescence quenching, and synergistic effects of Co- doped TiO2 nanoparticles Kumari A., Tjiu W.W., Roy J., Verma V.K., Rahaman A., Aabdin Z., Singh V.R. WOS 2468-0230
286 In Vivo Assessment of a Triple Periodic Minimal Surface Based Biomimmetic Gyroid as an Implant Material in a Rabbit Tibia Model Khan P.A., Raheem A., Kalirajan C., Prashanth K.G., Manivasagam G. WOS 2694-2461
287 Impact of hydroxyapatite (HaP) nano particle on the morphology, thickness, and adhesion strength of electrophoretic ZnO/HaP composite coated SS316L Murugan M., Kandasamy J. WOS 1879-3347
288 Effects of adding nanodiamonds in mechanical properties of jute and ramie fiber reinforced epoxy composites Arun Kumar M., Selvaraj S.K., Kanniyappan S., Karthikeyan B., Chadha U. WOS 0272-8397
289 Effect of molybdenum disulfide functionalized multiwalled carbon nanotubes based hybrid on morphology, mechanical and thermal properties of epoxy nanocomposites Varghese A.S., Sreekanth M.S. WOS 0272-8397
290 Surface integrity of consecutive shot- peened additively manufactured 316L stainless steel Haribaskar R., Sampath Kumar T. WOS 1532-2475
291 Impact of copper and manganese on phase transformation, microstructural development and material strength in CoCrFeNi high-entropy alloys through mechanical alloying Babu P.D., Dongre P., Moganraj A., Nambiraj N A., Manivasagam G., Sure J. WOS 2352-4928
292 Real-Time Experimental Evaluation and Analysis of PID and MPC Controllers Using HIL Setup for Robust Steering System of Autonomous Vehicles Gokul Krishnan S., Suresh Kumar P., Nassar Matara N., Wang Y. WOS 2169-3536
293 Interlaminar tensile properties of raw and carbon fiber-wrapped additively manufactured polyetherimide Sankaran V., Rajan A.J., Selvaraj S.K., Jose S., Wilson V.H., Singh K.A., Sahayaraj A.F., Patterson A.E. WOS 0032-3888
294 Effect of cellulose nanocrystals on the mechanical and free vibration behavior of hybrid glass/kenaf fiber reinforced polyurethane core-based sandwich structures K E.R., Naveen J., Karthikeyan N., Khan T., Sebaey T.A. WOS 1544-0478
295 Numerical investigations of fluid flow and heat transfer in double forward facing step in the presence of a fin Yashwanth S., Satheesh A., Arumugam S.K., Rajesh Kanna P., Chidambaram R.K., Taler D., Sobota T., Taler J. WOS 1521-0634
296 Dual-scale reinforcement of co-cure single lap joints through graphene nanoparticles and CFRP Z-pin Venugopal A., Sudhagar P E. WOS 0167-577X
297 Tribological profiling of Mg-Gd-Y Alloy: Investigating sliding wear dynamics under varied temperature conditions Saad Patel M., Rahaman A., Jose Immanuel R. WOS 0167-577X
298 Enhancement of electromagnetic interference shielding properties of hemp fiber sandwiched carbon fiber composites using electroless NiP coating Krishnasamy P., Mylsamy G., Arulvel S., Rajamurugan G., Akepati D., Harinath Reddy P., Prabhat Surya A. WOS 0167-577X
299 Improving the Efficiency of the Axial Flux Machine with Hybrid Excitation Prajzendanc P., Palka R., Paplicki P., Wardach M., Cichowicz M., Cierzniewski K., Dorobczynski L., Gundabattini E. WOS 2079-9292
300 A Hybrid Algorithm-Based Comparative Analysis of a Newly Designed Tool Holder During the Machining of Hastelloy-B3 with MQL Murali T., Devendiran S., Venkatesan K. WOS 1319-8025
301 The impact of energy density and process parameters on the distribution of residual stresses in additively manufactured stainless steel 316 L Haribaskar R., Kumar T.S. WOS 0947-8396
302 Mechanical, Corrosion, and Tribological Properties of Coated Milling Inserts Tamiloli N., Venkatesan J., Kumar T.S. WOS 1059-9495
303 Optimization of tensile properties by rotary friction welded dissimilar 2014 T6 and 6082 T6 aluminium alloys Settu N., Kesavan G.K., Subramanian A., Ramasamy M., Rangesh A., Settu R., Mathivanan T., Praveenkumar V., Shankar K.V., Manu K. WOS 1955-2505
304 A Quantitative Approach to Precipitate Characterization in Wire Arc Additive Manufactured Inconel 600 Series Alloys Nandi S., Manikandan M., Arivazhagan N., Rajinikanth V., Chowdhury S.G. WOS 1047-4838
305 Unlocking the potential of low concentration biodiesel blended with green synthesized novel carbon black nanoparticles from Ricinus communis outer shell: An experimental study under different compression ratios and EGR concentrations Murugan M.A., Ganesan N. WOS 1944-7450
306 Optimising thermal conductivity of the epoxy using copper as filler particles for improved performance of cryosorption pumps: An experimental investigation Kumar M., Bansal L., Verma R. WOS 0920-3796
307 Influence of different manufacturing techniques on GFRP flat-joggle-flat composite joints using multi-scale reinforcements for enhancing shear properties Hiremath V.S., Dhilipkumar T., Reddy D.M., Mutra R.R., Rajesh M. WOS 2053-1591
308 Influence of 3D printed adherend design on structural performance and vibrational behaviour of adhesively bonded joints Rajesh M., Venkatesan R., Kesavan S., Murali A.P., Sasikumar R., Kim S.-C., Dhilipkumar T., Al-Asbahi B.A. WOS 1806-3691
309 Predictive modeling for design of low elastic modulus and biocompatible -Ti alloys: A comprehensive machine learning-data driven approach with XGBoost as the key predictor Kanapaakala G., Subramani V. WOS 0954-4062
310 Importance of Al2TiO5 particle on the mechanical and wear performance of stir cast AA6061 composite using Central Composite Design Senthilraj K., Rajamurugan G. WOS 2510-1579
311 Mechanical and microstructural characterisation on the effect of increasing tool rotational speed of friction stir welded AZ31-B magnesium alloy [Caractérisation mécanique et microstructurale de l effet de l augmentation de la vitesse rotationnelle de loutil de l alliage de magnésium AZ31-B soudé par friction-malaxage] Kumaresh D., Venkatesan S. WOS 0008-4433
312 Study on the effect of tab cooling on the lithium-ion battery pack life cycle Muthukrishnan K., Ramesh Kumar C. WOS 1231-0956
313 Thermo-physical properties, heat transfer characteristics and performance of nano- enhanced refrigerants: A review Bibin B.S., Chereches E.I., Mystkowski A., Smierciew K., Dudar A., Gundabattini E. WOS 1231-0956
314 An Evaluation of Various Deep Convolutional Networks for the Development of a Vision System for the Classification of Domestic Solid Street Waste Yogamadhavan V.K., Mannayee G. SCOPUS 2182-2069
315 Dynamic Path Planning Algorithm for Mobile Robots: Leveraging Reinforcement Learning for Efficient Navigation Kappagantula S., Mannayee G. SCOPUS 2182-2069
316 Enhancing Rolled Steel I Beam Performance Through FRP Strengthening: Analytical and Numerical Modelling for Behavior Prediction Patil V.M., Awati M.M., Ahankari S.S., Lande A.C. SCOPUS 2250-2157
317 Advancements in micromachining of additive manufactured materials: a comprehensive review Manikandan P., Venkatesan K. WOS 1042-6914
318 Effect of additives on the performance of extruded polymer composites: A comprehensive review Sakthi Balan G., Aravind Raj S. WOS 1530-7980
319 Effect of surface modified adherend and nanofiller modified adhesives on the shear behaviour of single lap joints: a mini review Karthikeyan N., Naveen J. WOS 1568-5616
320 Advancement in experimental and computational approach for thermal performance investigation of single-tank packed bed thermal energy storage system Yuvaaraj J.S., Deepakkumar R. WOS 1806-3691
321 Embracing drones and the Internet of drones systems in manufacturing An exploration of obstacles Askerbekov D., Garza-Reyes J.A., Roy Ghatak R., Joshi R., Kandasamy J., Luiz de Mattos Nascimento D. WOS 0160-791X
322 Multifaceted multi-criteria decision making framework to prioritise the electric two- wheelers based on standard and regional driving cycles Gurusamy A., Ashok B., Alsaif F., Suresh V. WOS 0360-5442
323 Enhanced convective heat transfer with Al2O3-water nanofluid in a PCM-based thermal energy storage system Roy A., Venkitaraj K.P., Vigneshwaran P., Saboor S., Cuce E., Saxena K.K. WOS 2352-152X
324 Machine learning framework using on-road realtime data for battery SoC level prediction in electric two-wheelers Jain A., Jha V., Alsaif F., Ashok B., Vairavasundaram I., Kavitha C. WOS 2352-152X
325 Real-time testing of AI enabled automatic emergency braking system for ADAS vehicle using 3D point cloud and precise depth information Matara N.N., Suresh Kumar P., Karthik Krishnan O., Katte Y. WOS 2542-6605
326 Split injection timing optimization in ammonia/biodiesel powered by RCCI engine Pv E., Ravi K., Elumalai R., Kit C.C., K S.K., Karthik K., Gupta M.S., Asif M. WOS 2590-1230
327 A Tribological investigation of fly ash particulate-loaded E-glass fiber reinforced interpenetrating polymer network composites Vezhavendhan R., Ganesamoorthy R., Suresh G., Madheswaran D.K., Thangamuthu M., Chandramohan P., Rathinasabapathi G. WOS 0272-8397
328 Multi-objective artificial bee colony algorithm for reducing carbon emission and maximizing profit in a circular supply chain network Sakthivel A.R., Vimal K.E.K., Kandasamy J., Shiva S.N., Jayanth G., Nishanth A.S., Kumar D.V. WOS 1387-585X
329 Development of a Fast Running Equivalent Circuit Model with Thermal Predictions for Battery Management Applications Damodaran V., Paramadayalan T., Natarajan D., Kumar C R., Kanna P.R., Taler D., Sobota T., Taler J., Szymkiewicz M., Ahamed M.J. WOS 2313-0105
330 A hybrid method for the intelligent effectiveness management of production operators Kochaska J., Musia K., apczyska D., Xavior M.A., Jeyapandiarajan P. WOS 0254-5330
331 Microstructural evolution and mechanical properties of aluminum-graphite composites processed via accumulative roll bonding Biradar A., Rijesh M. WOS 0925-9635
332 Advancement in biomedical implant materials a mini review S A.D., P S.P.A., Naveen J., Khan T., Khahro S.H. WOS 2296-4185
333 Experimental investigation on turning Inconel 713C under different cooling conditions using a new honeycomb- textured tool Bharath H., Venkatesan K. WOS 1042-6914
334 Technology development of novel autogenous double pulse tungsten insert gas welding technique to evaluate the depth of penetration, micro segregation via machine learning and desirability function approach Nandhakumar S., Gokul kumar K., Arivazhagan N., Manikandan M., Jose B., Renangi S. WOS 2352-4928
335 Undergraduates process safety knowledge development with virtual reality game Sofri S., Reddy Prasad D.M., Azri M.H., Raja Sekhar Y. WOS 1049-4820
336 Assessment of non-linear critical pressure of MWCNT reinforced hybrid sandwich semi-ellipsoidal dome under hydrostatic pressure: A numerical and experimental study Barathan V., Gnanasekar S., Rajamohan V. WOS 1049-4820
337 Optimizing the Electrical Discharge Machining Process Parameters of the Nimonic C263 Superalloy: A Sustainable Approach Shastri R.K., Mohanty C.P., Mishra U., Hotta T.K., Patil V.V., Prashanth K.G. WOS 2504-4494
338 Silver nanoparticles incorporated polydimethylsiloxane nanocomposite film as hydrophobic infrared filters Calolsa R.S., Sumangala T.P., Kalpathy S.K., Thomas T., Kahaly M.U., Rahaman A. WOS 1099-1581
339 Dynamic FEA Analysis of the Super Lightweight External Cryogenic Fuel Tank (SLWT) Made of Aluminium Alloy 2195 Graphene Nano Composite for Launch Vehicle Aerospace Application Pazhani A., Salman S.S., Venkatraman M., Patel A., Xavior M.A., Batako A., Paulsamy J., Jayaseelan J. WOS 2504-477X
340 A comparative investigation on the development of porous-structured Akermanite (Ca2MgSi2O7) via ball milling, sol gel, and combination (hybrid) process for orthopedic applications Girija M., Kumar T.S. WOS 0884-2914
341 Mechanical, Microstructural and Wear Studies of a Ceramic Hybrid Reinforced ZE41 Magnesium Metal Matrix Composite Through Stir Casting Route Anand N., Selvaraj S.K. WOS 1939-5981
342 Three-Dimensional Numerical Studies on Optimizing the Discharge Coefficient of Screech Holes Resembling that of an Afterburner Using CFD Technique Iyengar S.Y., Ravi D., John B., Paramasivam S., Rajagopal T.K.R. WOS 1319-8025
343 Microstructure and Corrosion Characteristics of Dual Reinforced (SiC B4C) Al Matrix Composites Produced by Powder Metallurgy Process Bharathi P., Kumar T.S. WOS 1544-1024
344 Enhancing building energy efficiency and reducing carbon emissions through sustainable cement block admixtures Malkapur S.M., Falguni F., Iyengar A.S., Roy A., Shaik S., Kanna P.R., Jilte R.D., Alwetaishi M., Siddique M.J. WOS 1756-2201
345 Optimized electrophoretic zinc oxide coating on SS316L with enhanced hardness and scratch resistance Murugan M., Kandasamy J. WOS 0193-2691
346 Investigation of slot parameters on the performance of Savonius hydrokinetic turbine: a CFD study Kumar R., Kumar A. WOS 1806-3691
347 A Numerical Investigation on Turbulent CH4- air Combustion Flames of a Multi-Regime Burner Hikkimath G.K., Patel D.K. WOS 1563-521X
348 Double-Diffusive Natural Convection in L- Shaped Cavity by Lattice Boltzmann Method: Numerical Study Kanna P.R., Satheesh A., Arumugam S.K., Öztop H.F., Devi N.R. WOS 0145-7632
349 Failure evaluation on tailor made aerospace aluminum alloys via underwater friction stir welding employing predictive machine learning technologies Arun Prakash S., Gokul Kumar K. WOS 2631-8695
350 Influence of Graphene/h-BN and SiC/h-BN reinforcing particles on microstructural, mechanical and tribological characteristics of Al7075-based hybrid nanocomposites Tile P.S., Thomas B. WOS 2631-8695
351 Assessment of Degree of Sensitization of Cryo-rolled Standard Duplex Stainless Steel 2205 Vinothkumar R., Srinivasan N. WOS 2192-9270
352 Prediction of coefficient of friction of solid powder lubricants under high pressure conditions using machine learning algorithms [Vorhersage des Reibungskoeffizienten von Festpulverschmierstoffen unter Hochdruckbedingungen mit Hilfe von Algorithmen des maschinellen Lernens] Jose J., Suryawanshi A., Behera N. WOS 0933-5137
353 Performance Estimation of Blended Nano- Refrigerants' Thermodynamic Characteristics and Refrigeration Efficacy Katoch A., Razak F.A., Suresh A., Bibin B.S., Farina A.R., Cirillo L., Mystkowski A., Smierciew K., Dudar A., Gundabattini E. WOS 1898-4088
354 Flame stabilization and combustion enhancement in a scramjet combustor by varying strut injection angles Vanamamalai V., Panneerselvam P. WOS 1231-0956
355 HOT CORROSION STUDIES ON HVOF COATED ALLOY A-286 IN MOLTEN SALT ENVIRONMENT Muthu S.M., Arivarasu M., Jithesh K., Vignesh M., Dhinakaran V., Kumar P.S. WOS 2300-1909
356 Isolation, identification and screening of Polyurethane polymer degrading microbe isolated from contaminated site Aiswarya R., Vijayalakshmi S. SCOPUS 0972-0626
357 A CFD Analysis of the Flow Structure Inside an R141b Ejector to Identify the Internal Flow Variations in its Design and Off-Design Working Modes Patel D.K., Kumar M.A. SCOPUS 2348-8360
358 Advancements in 3D printing materials: A comparative analysis of performance and applications Subramani R., Mustafa M.A., Ghadir G.K., Al-Tmimi H.M., Alani Z.K., Rusho M.A., Rajeswari N., Haridas D., Rajan A.J., Kumar A.P. SCOPUS 2578-2010
359 Exploring the use of Biodegradable Polymer Materials in Sustainable 3D Printing Subramani R., Mustafa M.A., Ghadir G.K., Al-Tmimi H.M., Alani Z.K., Rusho M.A., Rajeswari N., Haridas D., Rajan A.J., Kumar A.P. SCOPUS 2578-2010
360 Investigation on compressed air energy storage system for efficient utilisation of renewable power sources Karthika J., Annamalai T., Kumar P.V.S., Olana F.D., Rasu N.G. SCOPUS 1757-1154
361 Unveiling the relationships between enablers in resiliently sustainable supply chains using an integrated TISM-Fuzzy MICMAC approach: Study of Indian automobile sector post-COVID-19 Khot S.B., Thiagarajan S. SCOPUS 2675-1240
362 Alcohol-alcohol-based draw solute minimizes the reverse solute flux in forward osmosis desalination Dey K., Dsilva Winfred Rufuss D. SCOPUS 0944-1344
363 Microstructure and mechanical behavior of AXM Mg alloy systems A review Thanabal N., Silambarasan R., Seenuvasaperumal P., Basha D.A., Elayaperumal A. WOS 2213-9567
364 Large language model to multimodal large language model: A journey to shape the biological macromolecules to biological sciences and medicine Bhattacharya M., Pal S., Chatterjee S., Lee S.-S., Chakraborty C. WOS 2162-2531
365 An overview of carbon-carbon composite materials and their applications Agarwal N., Rangamani A., Bhavsar K., Virnodkar S.S., Fernandes A.A.A., Chadha U., Srivastava D., Patterson A.E., Rajasekharan V. WOS 2296-8016
366 Critical Review on Advanced Cooling Strategies in Friction Stir Processing for Microstructural Control Patel M.S., Immanuel R.J., Rahaman A., Khan M.F., Jouiad M. WOS 2073-4352
367 Advancing sustainability in the steel industry: the key role of the triple helix sectors da Rocha A.B.T., Espuny M., Kandsamy J., Oliveira O. SCOPUS 1614-7499

2023

Sl. No Title of paper Name of the author/s Indexed In Scopus / WOS/Pub Med / ICI / Non Scopus ISSN number
1 Optimizing the thermal performance of solar energy devices using meta-heuristic algorithms: A critical review Afzal A., Buradi A., Jilte R., Shaik S., Kaladgi A.R., Ar c M., Lee C.T., Ni eti S. WOS 1364-0321
2 Experimental investigation on the thermal performance of a novel thermosyphon heat pipe with truncated cone for heat recovery systems Sakthi Priya M., Sakthivadivel D. WOS 0196-8904
3 Thermal sensitivity and potential cooling- related energy saving of masonry walls through the lens of solar heat-rejecting paints at varying orientations Kontoleon K.J., Saboor S., Mazzeo D., Ahmad J., Cuce E. WOS 0306-2619
4 Sustainable energy development technique of vertical axis wind turbine with variable swept area An experimental investigation Pietrykowski K., Kasianantham N., Ravi D., Jan G ca M., Ramakrishnan P., Wendeker M. WOS 0306-2619
5 Complete parametric investigation of a forward osmosis process using sodium chloride draw solution Dsilva Winfred Rufuss D., Hosseinipour E., Arulvel S., Davies P.A. WOS 0011-9164
6 Renewable heat powered polygeneration system based on an advanced absorption cycle for rural communities Praveen Kumar G., Ayou D.S., Narendran C., Saravanan R., Maiya M.P., Coronas A. WOS 0360-5442
7 Waste to fuel: Pyrolysis of waste transformer oil and its evaluation as alternative fuel along with different nanoparticles in CI engine with exhaust gas recirculation Sathish T., Surakasi R., KishoreT L., Rathinasamy S., Abulut Ü., Shaik S., Park S.G., Afzal A. WOS 0360-5442
8 Enhancement of energy conversion and emission reduction of Calophyllum inophyllum biodiesel in diesel engine using reactivity controlled compression ignition strategy and TOPSIS optimization Tamilvanan A., Mohanraj T., Ashok B., Santhoshkumar A. WOS 0360-5442
9 Towards stabilization and navigational analysis of humanoids in complex arena using a hybridized fuzzy embedded PID controller approach Mahapatro A., Dhal P.R., Parhi D.R., Muni M.K., Sahu C., Patra S.K. WOS 0957-4174
10 Corrosion behaviour analysis of SI engine components for ethanol-gasoline blends in flex fuel vehicular application Kumar T.S., Ashok B. WOS 0378-3820
11 A sustainable approach to produce yeast lipid by utilizing marine macroalgae biomass Nanda M., Jaiswal K.K., Negi J., de Farias Neves F., Ranjitha J., Vlaskin M.S., Grigorenko A.V., Chauhan P.K., Kumar V. WOS 0016-2361
12 A machine learning framework for evaluating the biodiesel properties for accurate modeling of spray and combustion processes Thangaraja J., Zigan L., Rajkumar S. WOS 0016-2361
13 Experimental assessment of biobutanol degradation exposed to automotive components: A material compatibility approach Karthick C., Kasianantham N. WOS 0957-5820
14 the oxidation behavior of stir-cast and heat-treated EV31A at high temperatures in an air atmosphere Somasundaram M., NarendraKumar U., Annamalai A.R. WOS 0010-938X
15 Influence of high compression ratio and hydrogen addition on the performance and emissions of a lean burn spark ignition engine fueled by ethanol-gasoline Suresh D., Porpatham E. WOS 0360-3199
16 Thermophysical properties and contact angle of ethylene glycol/2D graphitic carbon nitride nanofluids with different metal substrates for solar applications Gnanasekaran A., Rengasamy M., Eswaramoorthy N., Rajaram K. WOS 0167-7322
17 Effect of annealing temperature on the structural, electronic and magnetic properties of Co doped TiO2 nanoparticles: An investigation by synchrotron-based experimental techniques Kumari A., Kumar A., Dawn R., Roy J., Jena S., Vinjamuri R., Panda D., Sahoo S.K., Verma V.K., Mahapatra S., Rahaman A., Ahlawat A., Gupta M., Kumar K., Kandasami A., Singh V.R. WOS 0925-8388
18 Investigation of quasi-static indentation on sandwich structure with GFRP face sheets and PLA bio-inspired core: Numerical and experimental study Gunasegeran M., P. E.S., Vasudevan M., Ramamoorthy M., Arumugam A. WOS 0263-8231
19 Heat transfer and thermal comfort analysis of thermally activated building system in warm and humid climate A case study in an educational building Vivek T., Balaji K. WOS 1290-0729
20 Material compatibility of SI engine components towards corrosive effects on methanol-gasoline blends for flex fuel applications Sathish Kumar T., Ashok B. WOS 0254-0584
21 Numerical modelling of nonlinear baffles on sloshing suppression of rectangular tanks under horizontal excitation Rubesh Raja V., Ponnusamy P. WOS 0029-8018
22 S0 Lamb mode scattering studies in laminated composite plate structures with surface breaking cracks; insights into crack opening behavior Gupta S., Rajagopal P. WOS 0041-624X
23 Development of a Novel Welding Technique with Reduced Heat-Input by Employing Double-Pulsed Gas Metal Arc Welding for Aerospace Grade 18% Ni Maraging Steel Jose B., Manikandan M., Arivazhagan N., Muktinutalapati N.R., Reddy G.M. WOS 10871357
24 Heat Transfer Studies on Solar Parabolic trough Collector Using Corrugated Tube Receiver with Conical Strip Inserts Venkatesaperumal R., Syed Jafar K., Elumalai P.V., Abbas M., Cuce E., Shaik S., Saleel C.A. WOS 20711050
25 Enhancing the Biodiesel Production Potential of Synechococcus elongatus and Anabaena Cyanobacterial Strain Isolated from Saline Water Using Different Media Composition and Organic Carbon Sources Parthiban J., Jambulingam R. WOS 20711050
26 Machine learning approach with various regression models for predicting the ultimate tensile strength of the friction stir welded AA 2050-T8 joints by the K-Fold cross-validation method Anandan B., Manikandan M. WOS 2352-4928
27 Evolution of microstructure and mechanical properties for multi-layered Al-1100 strips and Al-Gr composites fabricated by accumulative roll bonding Biradar A., M R. WOS 2352-4928
28 Microstructure and mechanical characterization of Al6061 based composite and nanocomposites prepared via conventional and ultrasonic-assisted melt- stirring techniques Soni S.K., Manimaran D., Thomas S.B., Thomas B. WOS 2352-4928
29 Influence of microstructure on the oxidation characteristics of conventional and wire arc additive manufactured alloy 625 at 750 C Muthu S.M., Prem Kumar M., Venkateshkannan M., Dinek R., Arivazhagan N., Natesh M. WOS 0167-577X
30 Insights into the surface behavior of Inconel 617 and Inconel 625 material in molten salt Prem Kumar M., Manikandan M. WOS 0167-577X
31 Strategies to improve joint strength of friction lap welded AA7475/PPS hybrid joint with surface pre-treatment on AA7475 Sandeep R., Murali Nagarajan B., Kamlesh Kumar S., Adarsh S.J., Manoharan M., Natarajan A. WOS 0167-577X
32 Development of novel welding techniques for dissimilar joining of 12 mm thick plates of AISI347H and IN625 for CSP power plants Nandhakumar S., Gokul kumar K. WOS 0167-577X
33 Investigation on rod like SnO2@CdCO3 nanocomposite-based electron transport layer for CsPbBr3 heterojunction perovskite solar cell applications Nandhakumar E., Selvakumar P., Arulraj A., Vivek E., Venkatraman M.R., Sasikumar A., Prem Kumar M., Mangalaraja R.V., Kamatchi R., Senthilkumar N. WOS 0167-577X
34 Study of Various Properties of Chemically Treated Lignocellulosic Cissus quadrangularis Stem Fiber for Composite Reinforcement Ramasamy S., Kandasamy J., Samrot A.V., Vijayashree T. WOS 1544-0478
35 Nonlinear thermo-elastic stability of variable stiffness curvilinear fibres based layered composite beams by shear deformable trigonometric beam model coupled with modified constitutive equations Manickam G., Haboussi M., D'Ottavio M., Kulkarni V., Chettiar A., Gunasekaran V. WOS 0020-7462
36 Vibration Analysis of Composite Laminated and Sandwich Conical Shell Structures: Numerical and Experimental Investigation Chadha A., Sudhagar P.E., Gunasegeran M., Veerappa V.S. WOS 0219-4554
37 Signal-based parameter and fault identification in roller bearings using adaptive neuro-fuzzy inference systems Mutra R.R., Mallikarjuna Reddy D., Srinivas J., Sachin D., Babu Rao K. WOS 1806-3691
38 Evaluation of residual stresses in CO2 laser beam welding of SS316L weldments using FEA Vemanaboina H., Babu M.M., Prerana I.C., Gundabattini E., Yelamasetti B., Saxena K.K., Salem K.H., Khan M.I., Eldin S.M., Agrawal M.K. WOS 2053-1591
39 Effects of multiple fuel injection schedules and LPG energy share on combustion stability and output characteristics of dual- fuel HCCI engine Saiteja P., Ashok B., Hadhi A., Kiran A., Gopikrishnan N. WOS 0954-4062
40 Effect of sodium sulfate-diatomite eutectic mixture functionalized on Inconel 617 and 625 alloys surface a comparative study Prem Kumar M., Manikandan M. WOS 0954-4062
41 Experimental Investigation of the Hydrophobic and Modal Properties of Epoxy Nanocomposites Reinforced with Graphene Nanofillers Shankar A.N., Prasad M., Selvaraj R., George M., Mohanty A., Sivakumar J. WOS 0972-2815
42 Artificial immune system approach for optimizing abrasive water jet machining process on super alloys Rajyalakshmi G., Gupta Y., Panigrahi S., Ahsan M., Manjunath S.P., Jayakrishna K. Scopus 1955-2513
43 Oil-palm Based Nanocellulose Reinforced Thermoplastic Polyurethane for Plastic Encapsulation of Biomedical Sensor Devices: Water Absorption, Thickness Swelling and Density Properties Azra N.A., Atiqah A., Fadhlina H., Bakar M.A., Jalar A., Ilyas R.A., Naveen J., Sabaruddin F.A., Lim K.K., Asrofi M. Scopus 2672-9156
44 Insights on Anti-corrosion Coating of Magnesium Alloy: A Review Vinoth Kumar C., Rajyalakshmi G., Kartha J. Scopus 21984220
45 Weld quality monitoring via machine learning- enabled approaches Raj A., Chadha U., Chadha A., Mahadevan R.R., Sai B.R., Chaudhary D., Selvaraj S.K., Lokeshkumar R., Das S., Karthikeyan B., Nagalakshmi R., Chandramohan V., Hadidi H. Scopus 19552513
46 Resistance welding analysis of thermoplastic composite structures in aeronautical applications Totla H.S., Gupta A., Mishra S., Sharma S., Selvaraj S.K. Scopus 19552513
47 An analytical method of axial load distribution of deep groove variable clearance radial ball bearings Sinha R., Sahoo V., Paswan M., Routh B. WOS 15397742
48 Intelligent energy management through neuro-fuzzy based adaptive ECMS approach for an optimal battery utilization in plugin parallel hybrid electric vehicle Vignesh R., Ashok B. WOS 0196-8904
49 Assessment of pure, mixed and diluted deep eutectic solvents on Napier grass (Cenchrus purpureus): Compositional and characterization studies of cellulose, hemicellulose and lignin Gundupalli M.P., Cheenkachorn K., Chuetor S., Kirdponpattara S., Gundupalli S.P., Show P.-L., Sriariyanun M. WOS 0144-8617
50 Poultry fat biodiesel as a fuel substitute in diesel-ethanol blends for DI-CI engine: Experimental, modeling and optimization N S., Afzal A., V S.H., Abulut Ü., Alahmadi A.A., Gowda A.C., Alwetaishi M., Shaik S., Hoang A.T. WOS 0360-5442
51 Enhancement of R600a vapour compression refrigeration system with MWCNT/TiO2 hybrid nano lubricants for net zero emissions building Senthilkumar A., Prabhu L., Sathish T., Saravanan R., Casmir Jeyaseelan G.A., Abulut Ü., Mahmoud Z., Shaik S., Ahamed Saleel C. WOS 2213-1388
52 Lab-scale electrostatic droplet collection from a fog plume with droplet evaporation Jiang Y., Liu G., Ekambaram P., Yan X. WOS 1359-4311
53 Influence of Graphene Nanoplatelets on the Performance of Axial Suspension Plasma- Sprayed Hydroxyapatite Coatings Khan P.A., Thoutam A.K., Gopal V., Gurumallesh A., Joshi S., Palaniappan A., Markocsan N., Manivasagam G. WOS 2306-5354
54 Experimental investigation of thermally activated building system under the two different floor covering materials to maximize the underfloor cooling efficiency Chandrashekar R., Balaji Kumar WOS 1290-0729
55 A novel preparation and characterization of electroless NiP/MWCNT composite coated UHMWPE fabric in terms of wettability, electrical conductivity,thermal stability and breaking load resistance Biradar A., Kandasamy J. WOS 0254-0584
56 Vibration characteristics and optimal design of composite sandwich beam with partially configured hybrid MR- Elastomers Selvaraj R., Subramani M., Ramamoorthy M. WOS 1539-7742
57 Modeling and analysis of tapered composite beams with piezoelectric energy harvester: Numerical and experimental investigations Nachiappan Sevugan A., Murugan H., Ramamoorthy M., Rajamohan V. WOS 1539-7742
58 Waste sawdust-based composite as an interfacial evaporator for efficient solar steam generation Rengasamy M., Rajaram K. WOS 2046-2069
59 An Analysis of the Effects of Nanofluid-Based Serpentine Tube Cooling Enhancement in Solar Photovoltaic Cells for Green Cities Jose J.P.A., Shrivastava A., Soni P.K., Hemalatha N., Alshahrani S., Saleel C.A., Sharma A., Shaik S., Alarifi I.M. WOS 1687-4129
60 4E analysis of a two-stage refrigeration system through surrogate models based on response surface methods and hybrid grey wolf optimizer Ahmed R., Mahadzir S., Mota-Babiloni A., Al-Amin M., Usmani A.Y., Ashraf Rana Z., Yassin H., Shaik S., Hussain F. WOS 1932-6203
61 Experimental and numerical investigation of 3D printed bio- inspired lattice structures for mechanical behaviour under Quasi static loading conditions Chouhan G., Gunji B.M., Bidare P., Ramakrishna D., Kumar R. WOS 2352-4928
62 Controlling the mechanical failures of stir-cast Mg-AZ91D alloy using dicalcium silicate reinforcement Kumaravelu P., Kandasamy J. WOS 1350-6307
63 Influence of Al2TiO5 particles on AA6061 composites fabricated by bottom pouring stir casting technique Senthilraj K., Rajamurugan G. WOS 0167-577X
64 Post-buckling of variable stiffness curvilinear fibre-reinforced general lay-up composite beams by sinusoidal shear flexible theory Manickam G., Polit O., Haboussi M., Chettiar A., Kulkarni V., Gunasekaran V. WOS 0731-6844
65 Non-linear buckling analysis of MWCNT reinforced hybrid composite shell subjected to hydrostatic pressure: A numerical and experimental investigation GnanaSekar S., Rajamohan V. WOS 1537-6532
66 Experimental Investigation and Optimization of AZ31 Mg alloy during Warm Incremental Sheet Forming to Study Fracture and Forming Behaviour Magdum R., Chinnaiyan P. WOS 2079-6412
67 An efficient three-level weighted essentially non-oscillatory scheme for hyperbolic equations Neelan A.A.G., Chandran R.J., Diaz M.A., Bürger R. WOS 1807-0302
68 Mechanical Characteristics and Wear Behaviour of Al/SiC and Al/SiC/B4C Hybrid Metal Matrix Composites Fabricated Through Powder Metallurgy Route Bharathi P., Kumar T.S. WOS 1876-9918
69 Fretting Wear Behavior of Al-Si-Mg- Ni Hypoeutectic Alloy with Varying Solutionizing Time Govind V., Praveen K.K., Vignesh R.V., Vishnu A., Vishnu J., Manivasagam G., Shankar K.V. WOS 1876-9918
70 Vibration Behavior of AA5083 Aluminosilicate sub-µ Composite at Different Temperature Condition Kumar P.S.S.R., Mashinini P.M., Sudhagar P.E., Natarajan A. WOS 1876-9918
71 A combined study of filterability and soaking strength of fuel filter and effect of injection timing on CI engine characteristics using Ceiba pentandra biodiesel Saravanan B., Musthafa B., Asokan M.A. WOS 1759-7277
72 Effect of gradient structure on additively manufactured auxetic and hybrid auxetic structure for energy absorption applications Bagewadi S.S., Bhagchandani R.K. WOS 1464-4207
73 Analysis of fracture toughness and fatigue crack growth rates of electron beam-welded dissimilar nickel-based superalloys: Mode-I cracks oriented normal to the weld Saju T., Velu M. WOS 1464-4207
74 Failure Assessment and High- Temperature Corrosion Behavior of Inconel 625 Welds in Simulated K2SO4 + 60% NaCl Boiler Environment Prabu S.S., Muthu S.M., Sujai S., Ramkumar K.D., Beemkumar N., Kariappan E. WOS 1059-9495
75 An Alternative Approach to Study Photo-catalytic Behavior of TiO2 Using Synchrotron-Based Advanced Spectroscopic Techniques Kumari A., Zaman M., Kumar A., Singh V.R., Ghosh A., Sahoo S.K., Rahaman A., Mandal S.K., Bhunia S. WOS 1059-9495
76 Dependence of wake structure evolution on the frequency of a pitching wing: A numerical investigation using LES Vineeth V.K., Kumar Patel D. WOS 0217-9792
77 Studies on fly ash/coir/sugarcane reinforced epoxy polymer matrix composite [Studien über flugasche- /kokos-/zuckerrohrverstärkte Epoxidpolymermatrix- Verbundwerkstoffe] Gopalan V., Rajarajan S., Wilson M., Venkatesan J., Elango M., Natarajan S., Rajakumar S. WOS 1521-4052
78 Computational investigation and parametric design of high speed evacuated tube transportation De A., Nangare S.S., Sadasivan S., Arumugam S.K., John B., Yaoping Z. WOS 14684349
79 Analysis of tensile strength on friction stir welded Al 6061 composite reinforced with B4C and Cr2O3 using RSM and ANN Uday K.N., Rajamurugan G. Scopus 2631-8695
80 Response surface methodology based evaluation of S-glass fibre composite reinforced with aluminium oxide/pearlite hybrid nano particles Guru Mahesh G., Rajesh N., Jayakrishna K. Scopus 2374-068X
81 Physical and mechanical behaviour of polyester-based composites with micro-sized blast furnace slag as filler material Sawlani P., Tyagi D., Rajput V., Sahu M., Gupta G., Jha A., Agrawal A. Scopus 2214-7853
82 Simulation of Temperature Distribution in a Brake Pad Ceramic Composite Material Babu P., Solomon D.G. Scopus 22502130
83 Performance of refrigeration system using Al2O3, CuO and TiO2 nano- enhanced refrigerants: A review Bibin B.S., Amartya P., Govil K., Edison G. Scopus 2214-7853
84 Nanocellulose-based aerogels for water purification: A review Paul J., Ahankari S.S. WOS 0144-8617
85 Mechanical properties of cellulose- based multiscale composites: A review Ganapathy V., Muthukumaran G., Sudhagar P.E., Rashedi A., Norrrahim M.N.F., Ilyas R.A., Goh K.L., Jawaid M., Naveen J. WOS 0272-8397
86 A review on various phases and alloy design methods of -Ti alloys for biomedical applications Kanapaakala G., Venkatesan S. WOS 1464-4207
87 A Review on Electrical Properties of Fiber-Reinforced Polymer Material: Fabrication, Measurement, and Performances Mylsamy G., Krishnasamy P. WOS 0972-2815
88 A State-of-the-art Review on Keratin Biomaterial as Eminent Nanocarriers for Drug Delivery Applications Srinivasan V., Palanisamy P. WOS 1570-1808
89 A techno-economic assessment of waste oil biodiesel blends for automotive applications in urban areas: Case of India Jeyaseelan T., El Samad T., Rajkumar S., Chatterjee A., Al-Zaili J. WOS 0360-5442
90 Collective influence and optimization of 1-hexanol, fuel injection timing, and EGR to control toxic emissions from a light-duty agricultural diesel engine fueled with diesel/waste cooking oil methyl ester blends De Poures M.V., Dillikannan D., Kaliyaperumal G., Thanikodi S., Abulut Ü., Hoang A.T., Mahmoud Z., Shaik S., Saleel C.A., Afzal A. WOS 0957-5820
91 Air-conditioning cost savings, CO2 emission benefits and return on investment by using waste in porotherm bricks in hot-arid and warm-temperate climates Shaik S., Roy A., Arc M., Kontoleon K.J., Afzal A., Li D. WOS 1996-1073
92 Design, fabrication and investigations of natural convection step serrated fin plate integrated trough array low-cost collector for solar air heating: An application to agricultural crop drying Prakash R., Kamatchi R. WOS 0038-092X
93 Zero emission /energy building heating through parabolic dish collector focused KNO3NaNO3 and KNO3NaNO3 NaNO2 PCM absorber: A case study Sathish T., Suresh P., Sharma K., Saravanan R., Saleel C.A., Shaik S., Khan S.A., Panchal H. WOS 2214-157X
94 Flake-like CuO nanostructure coated on flame treated eucalyptus wood evaporator for efficient solar steam generation at outdoor conditions Gnanasekaran A., Rajaram K. WOS 0927-7757
95 Effect of Europium Addition on the Microstructure and Dielectric Properties of CCTO Ceramic Prepared Using Conventional and Microwave Sintering Evangeline T G., Annamalai A R., Ctibor P. WOS 1420-3049
96 Experimental Investigation for Determining an Ideal Algal Biodiesel- Diesel Blend to Improve the Performance and Mitigate Emissions Using a Response Surface Methodology Ramachandran E., Krishnaiah R., Venkatesan E.P., Murugan M., Medapati S.R., Sekar P. WOS 2470-1343
97 Comparative Study of Soft Computing and Metaheuristic Models in Developing Reduced Exhaust Emission Characteristics for Diesel Engine Fueled with Various Blends of Biodiesel and Metallic Nanoadditive Mixtures: An ANFIS-GA-HSA Approach Khan O., Khan M.Z., Alam M.T., Ullah A., Abbas M., Saleel C.A., Shaik S., Afzal A. WOS 2470-1343
98 Experimental Investigation on the PCCI Engine Fueled by Algal Biodiesel Blend with CuO Nanocatalyst Additive and Optimization of Fuel Combination for Improved Performance and Reduced Emissions at Various Load Conditions by RSM Technique Ramachandran E., Krishnaiah R., Perumal Venkatesan E., Medapati S.R., Sekar P. WOS 2470-1343
99 Environment and economic analysis of reverse supply chain scenarios for remanufacturing using discrete-event simulation approach Ravichandran M., Vimal K.E.K., Kumar V., Kulkarni O., Govindaswamy S., Kandasamy J. WOS 1387-585X
100 Modelling the Barriers to Circular Economy Practices in the Indian State of Tamil Nadu in Managing E-Wastes to Achieve Green Environment Mahanth T., Suryasekaran C.R., Ponnambalam S.G., Sankaranarayanan B., Karuppiah K., Nielsen I.E. WOS 2071-1050
101 Superior fretting wear resistance of 30Nb5Ta30Ti15V20Zr refractory high entropy alloy in a comparison with Ti6Al4V Thirathipviwat P., Onuki Y., Vishnu J., Kesavan P., Raheem A., Manivasagam G., V Shankar K., Hasegawa M., Sato S. WOS 0167-577X
102 Evolution of crystallographic texture and grain boundary character in hot press sintered tungsten heavy alloy as a function of sintering temperature Manikandan R., Raja Annamalai A. WOS 0167-577X
103 Effect of continuous and pulsed current techniques on wire-arc additive manufacturing of a nickel-based superalloy Barath Kumar M.D., Manikandan M. WOS 0167-577X
104 Nano-mechanical approach to study the behavior of annealed nanodiamond reinforced epoxy nanocomposites Singh B., Mohanty A. WOS 0272-8397
105 An experimental and numerical investigation on the performance of novel hybrid bio-inspired 3D printed lattice structures for stiffness and energy absorption applications Doodi R., Gunji B.M. WOS : 1537-6494
106 Flammability and vibrational study of graphene incorporated epoxy/ramie/glass hybrid nanocomposite Thiyagu C., NarendraKumar U. WOS 1097-4628
107 Influence of Reduced Graphene Oxide (rGO) on Plasma Sprayed Nanostructured Coatings Srikanth A., Bolleddu V. WOS 1059-9630
108 Effect of Laser Shock Peening without Coating on Grain Size and Residual Stress Distribution in a Microalloyed Steel Grade Samuel C., Moganraj A., Swaroop S., Praveenkumar K., Natarajan A., Nageshwara Rao M., Syed B., Bhattacharya B. WOS 2073-4352
109 Surface morphology and dimensional accuracy of additively manufactured Ti- 6Al-4V alloy: Effect of variable scanning speed with constant laser power in widespread energy density Praveen Kumar D., Vinoth Jebaraj A. WOS 1464-4207
110 Life assessment of thermal sprayed alloy 825 in waste heat incineration environment Muthu S.M., Arivarasu M., Sivaswamy G. WOS 0308-0161
111 A Study for the development of prosthetic foot by additive manufacturing Kathrotiya D., Yusuf A., Bhagchandani R.K., Gupta S. WOS 1806-3691
112 Effect of Load, Sliding Velocity, and Reinforcements on Wear Characteristics of Al7075-Based Composite and Nanocomposites Fabricated by Ultrasonic-Assisted Stir- Casting Technique Tile P.S., Thomas B. WOS 1939-5981
113 Metallographic Characterization of Laser Peened Ti6Al4V Subjected to Hydrogen Charging Kumar G.R., Rajyalakshmi G., Swaroop S., Vignesh M., Kumar M.S., Deng J. WOS 1059-9495
114 Prediction of wear of dental composite materials using machine learning algorithms Suryawanshi A., Behera N. WOS 1025-5842
115 Developing optimal wear performance for nylon 6 loaded up with Boron Nitride (PA6/BN) composites using Taguchi direct and aspect ratio-based Taguchi- Pareto method Adekoya A.A., Adedeji W.O., Oke S.A., Rajan A.J. Scopus 2634-8853
116 Experimental investigation on WEDM parameters of Ni-rich nitinol plate Muralidharan B., Rajeshkannan R., Makharia A., Bhatt A.K. Scopus 2631-8695
117 Development and analysis of solid lubricant coating on M2 high-speed steel using the EDC process Muralidharan B., Kumaran V., Barathsuriya R.D. Scopus 2631-8695
118 Sub-zero Quasi-static and Fatigue Behavior of SAE 1040 Automotive Anti- roll Bars in Flexure Bhanage A., Krishnan P. Scopus 1946-4002
119 Assessment on thermally sprayed ceramic coatings with CNT nanoparticles Kalangi C., Bolleddu V. Scopus 2374-068X
120 Energy Harvesting from Vibrating Cantilever Structure of Different Base Materials using Piezoelectric Material: Theoretical and Experimental Approach Krishna A., Palanivelu S. Scopus 2423-7167
121 Convective heat transfer enhancement using impingement jets in channels and tubes: A comprehensive review Kumar R., Nadda R., Kumar S., Saboor S., Ahamed Saleel C., Abbas M., Afzal A., Linul E. WOS 1110-0168
122 Importance of Fiber-/Nanofiller-Based Polymer Composites in Mechanical and Erosion Performance: A Review Sundarakannan R., Balamurugan K., Jyothi Y., Arumugaprabu V., Sathish T., Mahmoud Z., Yousef E.S., Basheer D., Shaik S. WOS 1687-4129
123 A process parameters review on selective laser melting-based additive manufacturing of single and multi- material: Microstructure, physical properties, tribological, and surface roughness Nandhakumar R., Venkatesan K. WOS 2352-4928
124 Review of Waste Cooking Oil (WCO) as a Feedstock for BiofuelIndian Perspective Manikandan G., Kanna P.R., Taler D., Sobota T. WOS 0360-5442
125 Microstructural, Mechanical, and Corrosion Properties of AZXX Magnesium Alloy: A Review of Processing Methods B S.P., Dhanaji T.U., Dassani S., Somasundaram M., Muthuchamy A., Raja Annamalai A. WOS 2073-4352
126 A review on wire mesh reinforced polymer composite Singh C Q.J., Rajamurugan G., Krishnasamy P., Sutrave S., Jain A. WOS 2574-089X
127 Designs, advancements, and applications of three-dimensional printed gyroid structures: A review Chouhan G., Bala Murali G. WOS 0954-4089
128 Electric discharge coating process: A critical review with potential application Kumaran V., Muralidharan B. Scopus 2631-8695
129 Vapour polishing of fused deposition modelling (FDM) parts: a critical review of different techniques, and subsequent surface finish and mechanical properties of the post-processed 3D-printed parts Mathew A., Kishore S.R., Tomy A.T., Sugavaneswaran M., Scholz S.G., Elkaseer A., Wilson V.H., John Rajan A. Scopus 2363-9512
130 Advanced solid-state welding based on computational manufacturing using the additive manufacturing process Shah P.A., Srinath M.K., Gayathri R., Puvandran P., Selvaraj S.K. Scopus 1955-2513
131 Removal of Heavy Metals from Industrial Wastewater using Low-Cost Waste Materials Lakshmi M., Ranjitha J. Scopus 0972-0626
132 Impact on combustion stability, fuel economy and emission compliance with butanol enleanment strategy in gasoline engine A drop-in fuel approach Chinnadurai K., Kasianantham N. WOS 0378-3820
133 Pore size variation of nano-porous material fixer on the engine bowl and its combined effects on hybrid nano-fuelled CI engine characteristics Sathish T., Abulut Ü., Muthukumar K., Saravanan R., Alwetaishi M., Shaik S., Saleel C.A. WOS 0016-2361
134 Synthesized evaluation of various injection regimens on hydrogen propelled homogeneous charge compression ignition and dual fuel modes for an automotive application Sathishkumar S., Ibrahim M.M. WOS 0360-3199
135 Barriers to the adoption of digital technologies in a functional circular economy network K V.K.E., K S., Kandasamy J., Venkat V., Mani R.S. WOS 1936-9735
136 Numerical analysis of heat transfer and fluid flow in microchannel heat sinks for thermal management Singupuram R., Alam T., Ali M.A., Shaik S., Gupta N.K., Akkurt N., Kumar M., Eldin S.M., Dobrot D. WOS 2214-157X
137 Atomic scale interfacial magnetism and origin of metal-insulator transition in (LaNiO 3) n /(CaMnO 3) m superlattices: a first principles study Jilili J., Tolbatov I., Cossu F., Rahaman A., Fiser B., Kahaly M.U. WOS 2045-2322
138 Effect of multiple laser shock peening without coating on residual stress distribution and high temperature dry sliding wear behaviour of Ti-6Al-4V alloy Praveenkumar K., Swaroop S., Manivasagam G. WOS 0030-3992
139 Dynamic stability analysis of metro tunnel in layered weathered sandstone Shoeb M., Ali Khan S., Alam T., Ashraf Ali M., Kumar Gupta N., Muslim Ansari M., Arif Kamal M., Shaik S., Eldin S.M., Dobrota D. WOS 2090-4479
140 Hybrid membrane-cryogenic CO2 capture technologies: A mini-review Sreenath S., Sam A.A. WOS 2296-598X
141 Better decision-making strategy with target seeking approach of humanoids using hybridized SOARANN-fuzzy technique Muni M.K., Kumar S., Sahu C., Dhal P.R., Parhi D.R., Patra S.K. WOS 1877-7503
142 1D graphitic carbon nitride additive modified ZnO electron transport layer for planar perovskite solar cells: 12.22 % power conversion efficiency over 1 cm2 active area Eswaramoorthy N., Rajaram K. WOS 0925-9635
143 Optimization of CO2 laser drilling process parameters of GFRP/Al2O3/perlite composites Guru Mahesh G., Kandasamy J. WOS 2352-4928
144 Effect of friction stir processing on microstructural evolution and mechanical properties of nanosized SiC reinforced AA5083 nanocomposites developed by stir casting Rajan G., kumar A., Godasu A.K., Mula S. WOS 2352-4928
145 High velocity oxy-fuel (HVOF) sprayed coating nanoarchitectonics: influence of reduced graphene oxide (rGO) on tribological characteristics Srikanth A., Bolleddu V. WOS 0947-8396
146 Development of robocasted MWCNTS- calcium silicate 3D structures for bone regeneration applications with retention of MWCNTS using vacuum sintering technique Ravoor J., Selvam R.E., Karuppan D., Puthillam U. WOS 0884-2914
147 Microemulsion fuel formulation from used cooking oil with carbinol as the dispersion phase Deepak B., Mohamed Ibrahim M. WOS 1556-7036
148 ASPEN plus modelling of air-CO2 and air- steam-CO2 gasification of Parthenium hysterophorous for hydrogen and carbon monoxide rich syngas production Venkatachalam N., Duraisamy S. WOS 1759-7277
149 Investigation of the effects of frequency veering phenomenon in a pre-twisted and double-tapered rotating Timoshenko beam D S., Reddy Degalhal M. WOS 1077-5463
150 Dielectric Response and Low Dielectric Loss of Gadolinium-Doped CaCu3Ti4O12 Ceramics Processed Through Conventional and Microwave Sintering Gecil Evangeline T., Raja Annamalai A., Ctibor P. WOS 0361-5235
151 Model based integrated control strategy for effective brake energy recovery to extend battery longevity in electric two wheelers Ashok B., Kannan C., Deepak C., Ramesh R., Narendhra T.M.V., Farrag M.E., Ashok S.D., Vignesh R., Saiteja P., Kavitha C. WOS 0954-4070
152 Dry-sliding wear analysis and prediction using response surface method and fuzzy logic for Kota stone dustfly ashepoxy hybrid composites Agrawal A., Gupta G., Pati P.R., Nayak S.K. WOS 2041-3009
153 Erosion wear analysis of coconut shell dust filled epoxy composites using computational fluid dynamics and Taguchi method Pradhan P., Purohit A., Mohanty I., Jena H., Sahoo B.B. WOS 0954-4062
154 Biodiesel production from Capparis spinosa L seed oil using calcium oxide as a heterogeneous catalyst derived from oyster shell Shobana R., Vijayalakshmi S., Deepanraj B., Ranjitha J. Scopus 2214-7853
155 Synthesis and characterisation of lipase immobilised magnetic nanoparticles and its role as a catalyst in biodiesel production Shalini P., Deepanraj B., Vijayalakshmi S., Ranjitha J. Scopus 2214-7853
156 A critical review on efficient photocatalytic degradation of organic compounds using copper-based nanoparticles Priya S.C., Vijayalakshmi S., Raghavendra S.G., Yldzhan S., Ranjitha J. Scopus 2214-7853
157 Experimental study on performance evaluation of passive valved piezoelectric micropumps with series, parallel and hybrid series-parallel configuration Vante A., Kanish T.C. Scopus 2374-068X
158 Turning parameters optimisation for Inconel 800H under MQL environment based on Harris hawks optimisation algorithm coupled with TOPSIS method Bharath H., Venkatesan K., Devendiran S. Scopus 1748-5711
159 Characterization of epoxy resin based banana fiber reinforced composite with waste CD powder filler Immanuel Durai Raj J., Arun Vasantha Geethan K., John Rajan A., Vijay Ananth S. Scopus 2214-7853
160 Free Vibrational Behavior of Bi-Directional Functionally Graded Composite Panel with and Without Porosities Using 3D Finite Element Approximations Ghatage P.S., Sudhagar P.E. Scopus 2229-838X
161 Investigation, optimising the MQL-Turning parameters of Nimonic 75 using weighted Mayfly algorithm Arun Kumar E., Devendiran S. Scopus 2374-068X
162 INVESTIGATION OF MECHANICAL PROPERTIES OF A NOVEL LOTUS FIBRE REINFORCED EPOXY COMPOSITES Thamba N.B., Bhupalam R., Duraiswamy R.P., Kasthala S.D.P., Samudrala A., Venugopal S., Viswanathan M.R. Scopus 1314-7978
163 Bulk Recycling of Ni-Cr-Mo Dental Alloy -A Sustainable Approach Batra S., Detroja X., Biradar A., Jayaprakash K., Mohammed N.Z., Rijesh M. Scopus 1823-6782
164 Binder optimization for extrusion based 3D printing of hydroxyapatite materials using different polymeric binders Ravoor J., Karuppan D., Renold Elsen S. Scopus 2214-7853
165 Valorization opportunities and adaptability assessment of algae based biofuels for futuristic sustainability-A review Muthuraman V.S., Kasianantham N. WOS 0957-5820
166 A comprehensive review of heat pipe: Its types, incorporation techniques, methods of analysis and applications Jose J., Kumar Hotta T. WOS 2451-9049
167 Review of bioresorbable AZ91, AZ31 and MgZnCa implants and their manufacturing methods Ezhilmaran V., Suya Prem Anand P., Kannan S., Sivashanmugam N., Jayakrishna K., Kalusuraman G. WOS 2410-4701
168 A Review on Synthetic Anthelmintic drugs against soiltransmitted Helminths infection in human parasites Shobana R., Ranjitha J. Scopus 0972-0626
169 Natural fiber biocomposites via 4D printing technologies: a review of possibilities for agricultural bio-mulching and related sustainable applications Ram Kishore S., Sridharan A.P., Chadha U., Narayanan D., Mishra M., Selvaraj S.K., Patterson A.E. Scopus 2363-9512
170 Synthesis and characterisation of graphene- reinforced AA 2014 MMC using squeeze casting method for lightweight aerospace structural applications Pazhani A., Venkatraman M., Anthony Xavior M., Moganraj A., Batako A., Paulsamy J., Jayaseelan J., Anbalagan A., Shanthi Bavan J. WOS 0264-1275
171 Revealing the structural and molecular interaction landscape of the favipiravir-RTP and SARS-CoV-2 RdRp complex through integrative bioinformatics: Insights for developing potent drugs targeting SARS- CoV-2 and other viruses Chakraborty C., Bhattacharya M., Saha A., Alshammari A., Alharbi M., Saikumar G., Pal S., Dhama K., Lee S.-S. WOS 1876-0341
172 Impact behaviour of MWCNTs reinforced YSZ and Al2O3 ceramic-nanocomposites prepared via vacuum hot-pressing technique Ramachandran K., Gnanasagaran C.L., Pazhani A., Kumar V.H., Xavior M.A., Subramani R.R., Arunkumar T. WOS 2238-7854
173 Comparative evaluation of chemically modified Jatropha oils as sustainable biolubricants in boundary lubrication regime Rajasozhaperumal G., Kannan C. WOS 0301-679X
174 Prediction and experimental validation approach to improve performance of novel hybrid bio-inspired 3D printed lattice structures using artificial neural networks Doodi R., Gunji B.M. WOS 2045-2322
175 Circular innovation ecosystem: a multi-actor, multi-peripheral and multi-platform perspective Thakur P., Wilson V.H. WOS 1387-585X
176 Prediction of failure load in flat-joggle-flat co- cured composite joints using artificial neural networks Hiremath V.S., Mallikarjuna Reddy D. WOS 0167-577X
177 Oxide scale formation and damage mechanism of the alloy 625 weldments in air and simulated boiler environment under cyclic condition Muthu S.M., Senthur Prabu S., Sujai S., Devendranath Ramkumar K., Beemkumar N., Kariappan E. WOS 0167-577X
178 ASSESSMENT of CI ENGINE VIBRATION at VARIOUS INJECTION TIMING and injection pressure with CEIBA PENTANDRA BIODIESEL Saravanan B., Musthafa B., Asokan M.A. WOS 1543-5075
179 Microscale investigations on additively manufactured Inconel 718: influence of volumetric energy density on microstructure, texture evolution, defects control and residual stress Praveen Kumar V., Vinoth Jebaraj A. WOS 0947-8396
180 Effect of Silicon Carbide and Boron Carbide on Mechanical and Tribological Properties of Aluminium 7075 Composites for Automobile Applications Bharathi P., Sampath Kumar T. WOS 1876-9918
181 The Modification of Titanium Surface by Decomposition of Tannic Acid Coating Kaczmarek-Szczepaska B., Zasada L., Michalska- Sionkowska M., Vishnu J., Manivasagam G. WOS 2076-3417
182 Powder Bed Fusion via Machine Learning- Enabled Approaches Chadha U., Selvaraj S.K., Abraham A.S., Khanna M., Mishra A., Sachdeva I., Kashyap S., Dev S.J., Swatish R.S., Joshi A., Anand S.K., Adefris A., Lokesh Kumar R., Kaliappan J., Dhanalakshmi S. WOS 1076-2787
183 Mechanical, Durability, and Microstructure Investigations on High-Strength Concrete Incorporating Nanosilica, Multi-Walled Carbon Nanotubes, and Steel Fibres Sumathi A., Elavarasi D., Karthikeyan B., Shobana P., Selvaraj S.K., Dewangan S., Molla B. WOS 1687-8442
184 Thermodynamic Performance Analysis of a Low-Cost, Recycled and Energy-Efficient Solar Air Heater with Waste Beverage Cans: An Experimental Research Cuce P.M., Saxena A., Cuce E., Yilmaz Y.N., Shaik S., Guo S. WOS 1993-033X
185 INFLUENCES OF P AND Sr ON MICROSTRUCTURE AND ITS EFFECTS ON MACHINABILITY AND MECHANICAL PROPERTIES OF HYPEREUTECTIC Al-20%Si Arunkumar D.T., Basavakumar K.G., Sujai S., Senthur Prabu S. WOS 0218-625X
186 Evaluating the hythane/water diesel emulsion dual fuel diesel engine characteristics at various pilot diesel injection timings Gopidesi R.K., Premkartikkumar S.R. Scopus 2214-7853
187 Effect of ethanol, propanol and butanol on karanja biodiesel with vegetable oil fuelled in a single cylinder diesel engine Musthafa B., Saravanan B., Asokan M.A., Devendiran S., Venkatesan K. Scopus 1110-0621
188 Numerical investigation on the effect of slit thickness and outlet angle of the bladeless fan for flow optimization using CFD techniques Ravi D., Rajagopal T.K.R. Scopus 2148-7847
189 IIoT Based Anomaly Detection and Maintenance Management of an Industrial Rotary System Velmurugan K., Saravanasankar S., Venkumar P., Sudhakarapandian R. Scopus 2457-1024
190 Efficiency enhancement of thresher by auto- controlling the cylinder clearance Warghane R.S., Easwara Pillai R. Scopus 0976-4348
191 Fluid-structure interaction and experimental studies of passive check valve based piezoelectric micropump for biomedical applications Vante A.B., Kanish T.C. Scopus 2374-068X
192 Investigating the compression and fretting wear behaviour of FDM printed PLA samples for bone fixation Uva Narayanan C., Suya Prem Anand P., Manivasagam G., Ezhilmaran V. Scopus 2374-068X
193 An Analysis of Causal Relationships Among Challenges Impeding Adoption of Industry 4.0 Through DEMATEL Technique [ - 4.0 ] Bisht V., Sridhar V.G., Janardhanan M. Scopus 1451-2092
194 Investigation on CFRP 3D printing build parameters and their effect on topologically optimised complex models Anbalagan A., Launchbury E.J., Kauffman M., Pazhani A., Anthony Xavior M. Scopus 2214-7853
195 Industry 4.0: smart preventive maintenance with optimal planning and scheduling process of the SMEs Velmurugan K., Saravanasankar S., Venkumar P., Paranitharan K.P., Sudhakarapandian R. Scopus 1741-5365
196 Recent trends in photovoltaic technologies for sustainable transportation in passenger vehicles A review Pochont N.R., Sekhar Y R. WOS 1364-0321
197 Challenges and Opportunities in Additive Manufacturing Polymer Technology: A Review Based on Optimization Perspective Raja S., John Rajan A. WOS 1098-2329
198 Aluminium-Silicon based Metal Matrix Composites for brake rotor applications: a review Dinesh Kumar P.K., Darius Gnanaraj S. Scopus 2631-8695
199 Drilling Parameters and Post-Drilling Residual Tensile Properties of Natural-Fiber-Reinforced Composites: A Review Goutham E.R.S., Hussain S.S., Muthukumar C., Krishnasamy S., Kumar T.S.M., Santulli C., Palanisamy S., Parameswaranpillai J., Jesuarockiam N. Scopus 2504-477X
200 Production of oxy-hydrogen gas and the impact of its usability on CI engine combustion, performance, and emission behaviors Dewangan A., Mallick A., Yadav A.K., Islam S., Saleel C.A., Shaik S., Abulut Ü. WOS 0360-5442
201 Energy aware semi-automatic assembly line balancing problem considering ergonomic risk and uncertain processing time Rahman H.F., Janardhanan M.N., Ponnambalam S.G. WOS 0957-4174
202 Techno-economic review assessment of hydrogen utilization in processing the natural gas and biofuels Narayanan R D., N V., Rajkumar S., Thangaraja J., M S., Devarajan Y., Geo Varuvel E. WOS 0360-3199
203 Spark plasma sintering of 13Ni-400 maraging steel: Enhancement of mechanical properties through surface modification Patil V.V., Prashanth K.G., Mohanty C.P. WOS 0925-8388
204 Artificial neural networks vs. gene expression programming for predicting emission & engine efficiency of SI operated on blends of gasoline- methanol-hydrogen fuel Zhu C.-Z., Samuel O.D., Elboughdiri N., Abbas M., Saleel C.A., Ganesan N., Enweremadu C.C., Fayaz H. WOS 2214-157X
205 Experimental analysis on the impacts of soil deposition and bird droppings on the thermal performance of photovoltaic panels Shaik S., Vigneshwaran P., Roy A., Kontoleon K.J., Mazzeo D., Cuce E., Saleel C.A., Alwetaishi M., Khan S.A., Gürel A.E., Abulut Ü. WOS 2214-157X
206 Potential of natural fiber based polymeric composites for cleaner automotive component production -a comprehensive review dua S., Khatri H., Naveen J., Jawaid M., Jayakrishna K., Norrrahim M.N.F., Rashedi A. WOS 2238-7854
207 Indoor thermal comfort analysis of TABS with untreated natural ventilation in a warm and humid climate An experimental study Vivek T., Rakesh C., K B., K P., Arc M. WOS 1876-1070
208 A user-friendly and accurate machine learning tool for the evaluation of the worldwide yearly photovoltaic electricity production Mazzeo D., Leva S., Matera N., Kontoleon K.J., Saboor S., Pirouz B., Elkadeem M.R. WOS 2352-4847
209 Experimental and theoretical examination of the energy performance and CO2 emissions of room air conditioners utilizing natural refrigerant R290 as a substitute for R22 Shaik S.V., Gorantla K., Shaik S., Afzal A., Rajhi A.A., Cuce E. WOS 1588-2926
210 Solar Salt with Carbon Nanotubes as a Potential Phase Change Material for High-Temperature Applications: Investigations on Thermal Properties and Chemical Stability Vigneshwaran P., Shaik S., Suresh S., Abbas M., Saleel C.A., Cuce E. WOS 2470-1343
211 Design and development of keratin/chitosan/glucosamine sulfate composite loaded MWCNT intended for osteoarthritis drug delivery Srinivasan V., Palanisamy P. WOS 1748-6041
212 Analysing the Barriers Involved in Recycling the Textile Waste in India Using Fuzzy DEMATEL Ponnambalam S.G., Sankaranarayanan B., Karuppiah K., Thinakaran S., Chandravelu P., Lam H.L. WOS 2071-1050
213 Thermal Mapping and Heat Transfer Analysis of an Induction Motor of an Electric Vehicle Using Nanofluids as a Cooling Medium Pandey G.K., Sikha S.S., Thakur A., Yarlagadda S.S., Thatikonda S.S., Baiju suja B., Mystkowski A., Dragaius E., Gundabattini E. WOS 2071-1050
214 A mini-review on cryogenic carbon capture technology by desublimation: theoretical and modeling aspects Aneesh A.M., Sam A.A. WOS 2296-598X
215 Effect of welding speeds on the metallurgical and mechanical property characterization of friction stir welding between dissimilar aerospace grade 7050 T7651-2014A T6 aluminium alloys Anandan B., Manikandan M. WOS 2352-4928
216 Influence of GNP nanoparticles on shear and dynamic behaviour of flat- joggle-flat composite joints Hiremath V.S., Reddy D.M. WOS 0167-577X
217 Free and forced vibration response of a laminated composite sandwich beam with dual honeycomb core: Numerical and experimental study Thanikasalam N., Ramamoorthy M. WOS 0272-8397
218 Frequency and deflection responses of 3D-printed carbon fiber reinforced polylactic acid composites: Theoretical and experimental verification Kannan S., Manapaya A., Selvaraj R. WOS 0272-8397
219 Investigation of Thermo-Hydraulic Performances of Artificial Ribs Mounted in a Rectangular Duct Kumar B.V., Kanna P.R., Manikandan G., Taler D., Taler J., Sobota T., Nowak- Oco M. WOS 1996-1073
220 Effect of SiC on the Properties of 4- Layered Functionally Graded Aluminium MMC Sheraf J., Solomon D.G. WOS 1876-9918
221 Nucleate pool boiling thermal management systems of hydrazine reduced graphene oxide (H-rGO) nanofluids with rough surface Rajaram K., Raman M., Dhanapal K., Muthusamy S., Ramamoorthi P., Govindasamy M., Mishra O.P. WOS 1556-7036
222 Effect of piston bowl geometry and spray angle on engine performance and emissions in HCCI engine using multi- stage injection strategy Mishra A., Kulshrestha S., Patel F.M., Tiwari N., Sharma A. WOS 1944-7442
223 A comprehensive assessment of vehicular performance and emission characteristics during real-time test- runs using selected bio-ethanol gasoline blends Babu M., Sivaraman M., Jeyaseelan T., MA A. WOS 1759-7277
224 Studies on Finite Element Analysis in Hydroforming of Nimonic 90 Sheet Ahamed J F.A., Chinnaiyan P. WOS 2227-7390
225 Effect of different laser texture configurations on improving surface wettability and wear characteristics of Ti6Al4V implant material Velayuthaperumal S., Radhakrishnan R. WOS 1806-3691
226 Development of Metallurgical and Mechanical Properties of Nickel-Based Superalloy Employed by Wire Arc Additive Manufacturing Technique Madesh R., Kumar K.G. WOS 1059-9495
227 Impact of CNTs Reinforcement on Microstructural Characteristics and Tribological Behavior of Plasma- Sprayed Conventional Ceramic Coatings Basha G.M.T., Venkateshwarlu B., Srikanth A., Varghese J.T., Thomas S., Thomas B.G., Venugopal A. WOS 0972-2815
228 Studies on Vapor Compression System Cascaded to the Ammonia Vapor Absorption System for Deep Freezing Application Bhuvaneshwaran K., Govindasamy P.K., Rajagopal S. Scopus 2250-0553
229 EFFECTS OF EXCESS AIR AND COAL SULFUR CONTENT IN PERFORMANCE IMPROVEMENT OF 660 MW SUPERCRITICAL BOILERS IN TERMS OF ACID DEW POINT TEMPERATURE Kumar G.N., Gundabattini E. Scopus 2150-3621
230 Fluid flow analysis of the lattice-based ceramic filters in molten metal filter application Chouhan G., Bidare P., Murali G.B., Pradhan J. Scopus 2631-8695
231 Fluid structure interaction study of shock absorber for clicking noise refinement Kulkarni S.S., Satheesh A. Scopus 1479-1471
232 Prediction of cutting performance using artificial neural network during buffered impact damper-assisted boring process Lawrance G., Paul P.S., Mohammed J., Gunasegeran M., Sudhagar P.E. Scopus 2520-8179
233 ANFIS-based active front steering system for reducing yaw disturbance of a vehicle using steer-by-wire system Krishna S., Ashok S.D., Narayanan S. Scopus 2195-268X
234 Experimental study and statistical validation of UHSM made with industrial wastes and hybrid fibres Magdalene P.S., Raj P., Priya G., Karthikeyan B., Selvaraj S.K., Azab M. Scopus 1955-2513
235 Bio-dielectrics to improve the performance of electro discharge machiningan investigation for cleaner production opportunities Sethy S., Behera R.K., Muduli K., Kandasamy J., Davim J.P., Rana J. Scopus 2374-068X
236 Drivers for circular economy development: making businesses more environmentally friendly Kurita A.E., Espuny M., Campos T.L.R., Kazançolu Y., Kandsamy J., de Oliveira O.J. WOS 0944-1344
237 Detection, location, and diagnosis of different faults in large solar PV system a review Venkatakrishnan G.R., Rengaraj R., Tamilselvi S., Harshini J., Sahoo A., Saleel C.A., Abbas M., Cuce E., Jazlyn C., Shaik S., Cuce P.M., Riffat S. WOS 1748-1325
238 Quantum Computing in the Next- Generation Computational Biology Landscape: From Protein Folding to Molecular Dynamics Pal S., Bhattacharya M., Lee S.-S., Chakraborty C. WOS 1559-0305
239 Recent Developments and Applications of TiN-Based Films Synthesized by Magnetron Sputtering Atta S., NarendraKumar U., Kumar K.V.A.N.P.S., Yadav D.P., Dash S. WOS 1059-9495
240 Calibration of flex-fuel operating parameters using grey relational analysis to enhance the output characteristics of ethanol powered direct injection SI engine Sathish Kumar T., Ashok B., Saravanan B. WOS 0360-5442
241 Analysing the impact of insulating material properties on the thermal performance of a novel composite precast concrete walling system exposed to elevated temperatures Kontoleon K.J., Bakas I., Cuce E., Saboor S., Torres M.C.A., Georgiadis-Filikas K., Kotsovinos P., Efthymiou E., Tsikaloudaki K.G. WOS 0950-0618
242 A hybrid calibration scheme for developing hydrogen enrichment ratio control map using RSM and ANN technique to enhance the characteristics of an ammonia biodiesel RCCI combustion engine Elumalai R., Ravi K. WOS 2214-157X
243 Experimental investigation on cooling surface heat transfer behavior of a thermally activated building system in warm and humid zones Rakesh C., Vivek T., Balaji K. WOS 2214-157X
244 Investigation on transport properties, heat transfer characteristics and pressure drop of CuO enhanced R1234yf based refrigerant B.S B., Gundabattini E. WOS 2214-157X
245 Small hole fabrication through additively manufactured CuCr1Zr electrode during EDM of a novel Haynes 25 superalloy M.P.G K., Annamalai A.R., Mohanty C.P., Chauhan A.S. WOS 2238-7854
246 Hot working and microstructural response of ultrasonically fabricated 2 wt%ZrB2/AA7068 composite Raja N., Yadav S., Kumar A., Gautam G. WOS 0925-8388
247 Impact and durability properties of alccofine-based hybrid fibre-reinforced self-compacting concrete Vivek S.S., Karthikeyan B., Bahrami A., Selvaraj S.K., Rajasakthivel R., Azab M. WOS 2214-5095
248 Impact of FreezeThaw Cycles on the Mechanical Performance of Palm Seed Powder-Modified Flax-Fibre Reinforced Polymer Composites Balan G.S., Raj S.A. WOS 1566-2543
249 Thermo-mechanical property enhancement of rigid polyurethane foam using silica and alumina as hybrid fillers over single filler Polimera S., Gali A., Nath S.K., Rahaman A., Chandan M.R., Balakumaran S.J. WOS 0272-8397
250 Evaluation of transverse shear properties of various 3D-printed bioinspired modified honeycomb core: Numerical and experimental study Daniel R C., Sudhagar P E. WOS 1539-7742
251 A Domain-Specific Next-Generation Large Language Model (LLM) or ChatGPT is Required for Biomedical Engineering and Research Pal S., Bhattacharya M., Lee S.-S., Chakraborty C. WOS 0090-6964
252 Experimental and numerical study on the distribution of temperature field and residual stress in a multi-pass welded tube joint of Inconel 617 alloy Kumar R., Mahapatra M.M., Pradhan A.K., Giri A., Pandey C. WOS 0308-0161
253 Influence of welding environment on joint characteristics of friction stir lap welded AA7475-PPS polymer hybrid joints Sandeep R., Murali Nagarajan B., Prem Kumar M., Jose B., Manoharan M., Natarajan A. WOS 0167-577X
254 Evolution of dielectric properties of Kevlar/epoxy laminated composites after hybridization by naturally woven Coco Nucifera sheaths Fakraoui O., Hammami H., Naveen J., Jawaid M., Kallel A. WOS 1530-793X
255 Analysis of adhesion strength and residual stresses developed by the EDC process Kumaran V., Muralidharan B. WOS 0267-0844
256 Characteristics of reduced graphene oxide (rGO) mixed HVOF-sprayed nanostructured coatings Srikanth A., Bolleddu V. WOS 0267-0844
257 Friction, wear, and characterization of magnesium composite for automotive brake pad material Praveenkumar B., Darius Gnanaraj S., Prabhu T R. WOS 1464-4207
258 Implementation of Machine Learning Algorithms for Weld Quality Prediction and Optimization in Resistance Spot Welding Johnson N.N., Madhavadas V., Asati B., Giri A., Hanumant S.A., Shajan N., Arora K.S., Selvaraj S.K. WOS 1059-9495
259 Free vibrational behavior of bi- directional perfect and imperfect axially graded cylindrical shell panel under thermal environment Ghatage P.S., Sudhagar P.E. WOS 1225-4568
260 Influence of cooling surface area on indoor air and surface heat transfer characteristics of a thermally activated building system in warm and humid zones: An Experimental study Vivek T., Balaji K. WOS 1744-2591
261 Effects of influencing factors on the performance and morphology of shock waves in ejectors: A review Sadasivan S., Arumugam S.K., Jishnu Chandran R., Aggarwal M.C. WOS 0129-1831
262 Influence of Additives on Characteristics of Thermal Barrier Coatings: A short Review Srikanth A., Mohammed Thalib Basha G., Bolleddu V., Varghese J.T., Thomas B.G., Venugopal A. WOS 0975-1645
263 A Novel SVM and K-NN Classifier Based Machine Learning Technique for Epileptic Seizure Detection Gowrishankar K., Muthukumar V., Pandian R.S., Deivasigamani S., Ang C.K. Scopus 2626-8493
264 A study of the effect of printing process parameters on the delamination and surface finish properties of aluminium- infused PLA printed via material extrusion Sakthi Balan G., Aravind Raj S., Sridharan M., Adithya R.N. Scopus 1448-4846
265 Analyzing the Tribological Behavior of Titanium Dioxide (TiO2) Particulate Filled Jute Fiber Reinforced Interpenetrating Polymer Network (IPNs) Composite by using Taguchi Optimization Technique Gopal K.V., Kumar K.R.V., Jayaseelan J., Suresh G., Vezhavendhan R., Ganesamoorthy R. Scopus 0354-8996
266 Characterization of the criteria applicable to the quality of educational and administrative management of universities [Criterios aplicables a la calidad de la gestión educativa y administrativa de las Universidades públicas] Medina-Cárdenas Y., Rico- Bautista D., Swaminathan J. Scopus 1646-9895
267 Comprehensive review on residual stress control strategies in laser-based powder bed fusion process Challenges and opportunities Kumar V.P., Jebaraj A.V. Scopus 2196-7229
268 Investigation on the environmental impact of R32, R152a and R41 refrigerant blends Karthik M.S.K., John Samuel K., Bhargav K.P., Varma K.S.D., Subramanian A., Santhosh Kanna N., Bibin B.S., Gundabattini E. Scopus 2631-8695
269 MECHANICAL BEHAVIOUR OF PINEAPPLE LEAF FIBRE REINFORCED EPOXY COMPOSITES AT DIFFERENT ORIENTATIONS Thamba N.B., Shinde A., Duraiswamy R.P., Joshi R., Kalonia Y., Mohammed N.M.V., Wahab R.S., Venugopal S. Scopus 1314-7471
270 Nano-refrigerants and nano-lubricants in refrigeration: Synthesis, mechanisms, applications, and challenges Said Z., Rahman S.M.A., Sohail M.A., Bahman A.M., Alim M.A., Shaik S., Radwan A.M., El- Sharkawy I.I. WOS 1359-4311
271 Exploring the synergistic potential of higher alcohols and biodiesel in blended and dual fuel combustion modes in diesel engines: A comprehensive review Krishnan M.G., Rajkumar S., Thangaraja J., Devarajan Y. WOS 2352-5541
272 Significance of ballistic parameters and nanohybridization in the development of textile-based body armor: A review Biradar A., Arulvel S., Kandasamy J. WOS 0734-743X
273 A review on design, operation and applications of cold-compressors in large-scale helium liquefier/refrigerator systems Sam A.A., Dutta R., Abraham D., Ghosh P., Pesyridis A. WOS 0011-2275
274 Performance analysis of electric motors, comparing lightweight techniques and cooling methods: A review Shrivatsaan M M., GB N., Palka R., Wardach M., Prajzendanc P., Gundabattini E., Singh R.R., Gnanaraj S D. WOS 0954-4062
275 Corrosion, Fatigue, and Wear Performance of Friction Stir Welded Aluminum Metal Matrix Composites: A Review Senthilraj K., Rajamurugan G. WOS 0975-1645
276 Enhancing lithium-ion battery cooling efficiency using composite phase change material packed mini-chambers: A numerical study Lokhande I.K., Tiwari N. WOS 2352-152X
277 Adaptive neuro fuzzy inference system- based energy management controller for optimal battery charge sustaining in biofuel powered non-plugin hybrid electric vehicle Vignesh R., Ashok B., Senthil Kumar M., Szpica D., Harikrishnan A., Josh H. WOS 2213-1388
278 Model development for biogas generation, purification and hydrogen production via steam methane reforming Tamilselvan R., Selwynraj A.I. WOS 0360-3199
279 Transient solidification and melting numerical simulation of lauric acid PCM filled stepped solar still basin used in water desalination process Hussain F., Shaik S., Khan S.A., Van Huynh V., Jilte R.D., Sundara V., Asif M., Linul E. WOS 2214-157X
280 Investigation of nano composite heat exchanger annular pipeline flow using CFD analysis for crude oil and water characteristics Kumar R R., Karthik K., Elumalai P.V., Alshahrani S., Abulut Ü., Saleel C.A., Shaik S., Khan S.A. WOS 2214-157X
281 Development and erosion wear analysis of polypropylene/Linz-Donawitz sludge composites Purohit A., Gupta G., Pradhan P., Agrawal A. WOS 0272-8397
282 Developing a framework for achieving optimal sustainability and resilience in circular sharing network Vimal K.E.K., Shaikh M.F., Chouhan A.P., Kandasamy J. WOS 1387-585X
283 Thermal management analyses of induction motor through the combination of air- cooling and an integrated water-cooling system Madhavan S., Raunak Devdatta P.B., Konda Y.R., Gundabattini E., Mystkowski A., Palka R., Wardach M., Prajzendanc P. WOS 2045-2322
284 An experimental evaluation of cetane improving techniques for enhancing the performance and emission trade-off in diesel engine: A comparative study Musthafa B., Asokan M.A. WOS 0958-305X
285 Experimental investigations of electrodeposited Zn-Ni, Zn-Co, and Ni-Cr- Co-based novel coatings on AA7075 substrate to ameliorate the mechanical, abrasion, morphological, and corrosion properties for automotive applications Sundaramali G., Aiyasamy J.P., Karthikeyan S., Kandavel T.K., Arulmurugan B., Rajkumar S., Sharma S., Li C., Dwivedi S.P., Kumar A., Singh R., Eldin S.M. WOS 1605-8127
286 Extensive Analysis of a Reinvigorated Solar Water Heating System Using Low-Density Polyethylene Glazing Duraivel B., Muthuswamy N., Shaik S., Cuce E., Owolabi A.B., Li H.X., Kavgic M. WOS 1996-1073
287 Defects in Metal Additive Manufacturing: Formation, Process Parameters, Postprocessing, Challenges, Economic Aspects, and Future Research Directions Haribaskar R., Kumar T.S. WOS 2329-7670
288 Optimal thermophysical characteristics and uptaking capacity of activated carbon- based composite adsorbent for enhancing the performance of an adsorption cooling system Satheeshkumar P., Selwynraj A.I. WOS 0167-577X
289 Influence of Lanthanum oxide on AZ31 magnesium composite properties Babu P., Solomon D.G., Ram Prabhu T. WOS 0167-577X
290 Exploring the potential of ternary fuel blends for enhanced engine efficiency and reduced emissions: application of multi- objective optimization Sharma P., Dabi M., Sahoo B.B. WOS 1556-7036
291 Investigation of thermal performance of a parabolic trough solar collector using different heat transfer fluids Basha S.K., Behura A.K. WOS 1556-7036
292 Thermo-mechanical property enhancement of rigid polyurethane foam composite using low cost, environment friendly fly ash over silica particles Polimera S., Gali A., Rahaman A., Chandan M.R., Balakumaran S.J., Nath S.K. WOS 1556-7036
293 Anticipating Surface Mean Pressure Coefficient on Inner Surface of C-Shaped Irregular Buildings Using Artificial Intelligence Methodology Mallick M., Mohanta A., Kumar A., Patra K.C. WOS 0893-1321
294 Experimental analysis of a diesel engine run on non-conventional fuel blend at different preheating temperatures Kumar R., Yadav A.S., Sharma A., Rajak U., Verma T.N., Alam T., Tiwari N., Jawahar C.P. WOS 0954-4089
295 Evolution of microstructure, microhardness, crystallographic texture, and grain size variation in dissimilar joints used in concentrated solar power plants application Nandhakumar S., Gokul Kumar K. WOS 1464-4207
296 Experimental investigation to optimize machining parameters for super duplex stainless steel in spark EDM using die- sinking and MQL system Sampath Kumar T., Vignesh M., Mathur A.B., Chunamari O.V. WOS 0954-4089
297 A New Approach to Estimate Unknown Process Parameters of Laser-Based Powder Bed Fusion: Printed SS316L Using Box Behnken Method Daniel S.A., Anand P.S.P. WOS 1059-9495
298 Development of hybrid multi-head, multi- material paste and ink extrusion type 3D printer for biomedical applications Ravoor J., Elsen S., Thangavel M., Arumugam D., Karuppan D. WOS 2187-0764
299 Numerical investigation and experimental validation of the effects on response parameters in a cryogenic assisted turning of Nimonic C-263 alloy Jadhav P.S., Mohanty C.P., Magdum R.A. WOS 1955-2513
300 An Investigation on Enhancement of Tensile Strength of AZ91D Hybrid Magnesium Matrix Composites Reinforced with Nano-TiO2 and Cerium Jayakrishna N., Nagaraju D. WOS 0975-1645
301 Multi-objective Optimization of Resistance Spot Welding Parameters of BH340 Steel Using Kriging and NSGA-III Johnson N.N., Madhavadas V., Asati B., Giri A., Hanumant S.A., Shajan N., Arora K.S. WOS 0975-1645
302 An experimental investigation on the adhesive, shear strength, and failure modes of glass fibre reinforced polymer flat-joggle- flat composite joints over different bonding techniques [Experimentelle Untersuchung der Haftfestigkeit, der Scherfestigkeit und der Versagensarten von glasfaserverstärkten Polymer-Flach-Kniehebel-Verbundwerkstoff- Verbindungen mit verschiedenen Klebetechniken] Hiremath V.S., Reddy D.M. WOS 1521-4052
303 Pressure Drop Prediction in Fluidized Dense Phase Pneumatic Conveying using Machine Learning Algorithms Shijo J.S., Behera N. WOS 1735-3645
304 Feasibility Analysis of Lignocellulosic Biomass Materials towards Sustainable Biofuel Production Baskaran K., Mohan C.G. WOS 0361-5219
305 Study and failure analysis of non-drive automotive rear axle of heavy commercial vehicle Ranjan A., Mutra R.R., Kirty Y., Srinivas J., Norhisham M., Reddy D.M. WOS 1741-5152
306 Study on Microstructure and Thermal Cycling Performance of the Plasma-sprayed YSZ Coating in Simulated Turbine Environment Muthu S.M., Arivarasu M., Jang C., Viknesh S., Surya Prakash Reddy K., Venkateshkannan M., Vishnu Siddharth V.D., Ahmed Liyakat N. Scopus 2731-8397
307 Technologies for the fabrication of crosslinked polysaccharide-based hydrogels and its role in microbial three-dimensional bioprinting A review Sharma Y., Shankar V. WOS 0141-8130
308 Integration of smart grid with renewable energy sources: Opportunities and challenges A comprehensive review Kataray T., Nitesh B., Yarram B., Sinha S., Cuce E., Shaik S., Vigneshwaran P., Roy A. WOS 2213-1388
309 Effect of Regenerative Braking on Battery Life Chidambaram R.K., Chatterjee D., Barman B., Das P.P., Taler D., Taler J., Sobota T. WOS 1996-1073
310 A review on recent advancements in an automotive turbocharger rotor system supported on the ball bearings, oil film and oil-free bearings Tammineni N.M., Mutra R.R. WOS 1806-3691
311 Evolution and Progress of Biologically Compatible Materials in Dental Field: A Descriptive Review Karunanithi C., Natarajan S. Scopus 0976-6014
312 Thermoeconomic and optimization approaches for integrating cooling, power, and green hydrogen production in dairy plants with a novel solar-biomass cascade ORC system Karthikeyan B., Praveen Kumar G. WOS 0196-8904
313 Use of modern algorithms for multi- parameter optimization and intelligent modelling of sustainable battery performance Afzal A., Buradi A., Jilte R., Sundara V., Shaik S., Abulut Ü., Alwetaishi M., Saleel C.A. WOS 2352-1538
314 Developing a Delphi assisted total interpretive structural model (D-TISM) for adopting the Industry 4.0 technologies within Lean Six Sigma framework Vimal K.E.K., Rashmi D., Sivakumar K., Kandasmay J., Paranitharan K.P., Venkataraman B. WOS 1366-5871
315 Melting numerical simulation of hydrated salt phase change material in thermal management of cylindrical battery cells using enthalpy-porosity model Afzal A., Jilte R., Samee M., Abulut U., Shaik S., Park S.G., Alwetaishi M. WOS 2213-1388
316 Optimization of flex fuel parameters to improve the characteristics of methanol powered direct injection spark ignition engine Sathish Kumar T., Ashok B. WOS 0016-2361
317 Experimental and theoretical analysis of exhaust manifold by uncoated and coated ceramics (Al2O3, TiO2 and ZrO2) Sunil Kumar K., Suryaprakash Kalos P., Nishat Akhtar M., Shaik S., Sundara V., Fayaz H., Afghan Khan S., Asif M. WOS 2214-157X
318 Experimental performance assessment of a novel insulation plaster as an energy- efficient retrofit solution for external walls: A key building material towards low/zero carbon buildings Cuce E., Cuce P.M., Alvur E., Yilmaz Y.N., Saboor S., Ustabas I., Linul E., Asif M. WOS 2214-157X
319 Effect of solutionizing and double ageing treatments on the microstructural characteristics and tensile properties of Inconel 718 welds Devendranath Ramkumar K., Vishnu Arvind A., Rama Aravinth K.V., Srivatson E., Ganguly S. WOS 2238-7854
320 Variable-stiffness curved laminated-beams by curvilinear fibers with arbitrarily layup Vibrational features by sine-based higher- order beam model with renewed- constitutive relations and improved- kinematics Manickam G., Polit O., Balaji L., Asha Kumar M., Dineshkumar S. WOS 0263-8223
321 Split injection strategy control map development through prediction-based calibration approach to improve the biodiesel-fuelled diesel engine characteristics Bragadeshwaran A., Rajasekar V., Usman K.M., Ayyasamy T., Govindasamy K. WOS 0944-1344
322 Hydrophobic electroless nickel phosphorus-graphene carbon nitride coating on AISI 4140 steel with enhanced hardness and scratch resistance Arulvel S., Dsilva Winfred Rufuss D., Kandasamy J., Kumaravelu P., Raychoudhury R., Raghul S. WOS 0257-8972
323 A semi-analytical inverse method to obtain the hyperelastic potential using experimental data Kulwant V., Arvind K., Prasad D., Sreejith P., Mohankumar K.V., Kannan K. WOS 0022-5096
324 Battery thermal management of a novel helical channeled cylindrical Li-ion battery with nanofluid and hybrid nanoparticle- enhanced phase change material Jilte R., Afzal A., Abulut Ü., Shaik S., Khan S.A., Linul E., Asif M. WOS 0017-9310
325 Engine vibration and noise characteristics of common rail direct injection engine fuelled with orange peel oil by response surface methodology based multi-objective optimization Ashok B., Tamilvanan A., Vignesh R., Saiteja P., Kumar P.V., Nikhil C., Nikhil D. WOS 2590-1230
326 Assessing low Reynolds number airfoil performance in microburst environments for micro/unmanned aerial vehicles: A numerical study Somashekar V., Immanuel Selwynraj A., Hariprasad V., Hiremath M.K. WOS 1089-7666
327 Experimental and modeling analysis of the transient spray characteristics of cyclopentane at sub- and transcritical conditions using a machine learning approach Jeyaseelan T., Son M., Sander T., Zigan L. WOS 1089-7666
328 The impact of short-duration precipitation events over the historic Cauvery basin: a study on altered water resource patterns and associated threats Ghosh S., Barik D.K., Renganayaki P., Kang B., Gumber S., Venkatesh S., Saini D.S., Akunuri S. WOS 2045-2322
329 Investigation on Ammonia-Biodiesel Fueled RCCI Combustion Engine Using a Split Injection Strategy Ramachandran E., Krishnaiah R., Perumal Venkatesan E., Saleel C.A., Shaik S. WOS 2470-1343
330 High-temperature tribological performance of stir-cast and heat-treated EV31A magnesium alloy: Experiments and predictions Somasundaram M., NarendraKumar U., Annamalai A.R., Muthuchamy A. WOS 2405-8440
331 Development of Efficient Energy Management Strategy to Mitigate Speed and Torque Ripples in SR Motor Through Adaptive Supervisory Self-Learning Technique for Electric Vehicles Saiteja P., Ashok B., Mason B., Krishna S. WOS 2169-3536
332 Pressure Drop and Heat Transfer Characteristics of TiO2/R1234yf Nanorefrigerant: A Numerical Approach Bibin B.S., Gundabattini E. WOS 1520-5827
333 Investigations on microstructure and mechanical properties on LM30-B4C nanocomposites fabricated through ultrasonic-squeeze assisted stir-casting P.K. D.K., Solomon D.G. WOS 2352-4928
334 Surface Laser Micropatterning of Polyethylene (PE) to Increase the Shearing Strength of Adhesive Joints Tofil S., Kurp P., Manikandan M. WOS 2075-4442
335 Investigation on mechanical properties of polyamide 6 and carbon fiber reinforced composite manufactured by fused deposition modeling technique Shashikumar S., Sreekanth M.S. WOS 0892-7057
336 Characterization of a functionally graded aluminium metal matrix composite (AMMC) Sheraf J., Darius Gnanaraj S. WOS 0167-577X
337 Significance of FSW process parameters and tialite particle reinforcement at the weld zone of AA6082 alloy ShivaKumar G.N., Rajamurugan G. WOS 0167-577X
338 Influence of electroless NiP/graphene coating on treated woven ramie fiber and its characterization Mylsamy G., Krishnasamy P. WOS 1402-4896
339 Experimental and numerical investigation on 2.5-dimensional nature-inspired infill structures under out-plane quasi-static loading Ashok D., Bahubalendruni M.V.A.R., Mhaskar A., Choudhary V., Balamurali G., Turaka S. WOS 0954-4089
340 Uniform and graded bio-inspired gyroid lattice: Effects of post-curing and print orientation on mechanical property Chouhan G., Bala Murali G. WOS 1464-4207
341 Effect of Molten Binary Salt on Inconel 600 and Hastelloy C-276 Superalloys for Thermal Energy Storage Systems: A Corrosion Study Prem Kumar M., Arivazhagan N., Chiranjeevi C., Raja Sekhar Y., Babu N., Manikandan M. WOS 1059-9495
342 Enhancement of joint strength of dissimilar aluminum/polymer hybrid joints by friction stir spot welding by surface textures Nagarajan B.M., Manoharan M. WOS 0169-4243
343 Machinability analysis on Al7075 matrix composites reinforced by nano-silicon carbide, boron carbide, graphene and MWCNT Ajithkumar J.P., Xavior M.A. WOS 1806-3691
344 Optimization of ideal engine parameters to adopt ammonia and algae biodiesel for reactivity controlled compression ignition engine using response surface methodology Elumalai R., Ravi K. WOS 0954-4062
345 Experimental and analytical investigation of bio-inspired lattice structures under compressive loading Doodi R., Balamurali G. WOS 2631-8695
346 Influence Of The Aspect Ratio And Location Of An Isothermal Block On The Buoyancy-Induced Heat Transfer In An Enclosure Nisrin J.J., Velkennedy R., Kalidasan K., Rajesh Kanna P. WOS 1940-2554
347 Aerothermodynamic analysis and rear wake assessment of shock wave interference over blunt leading edge at Mach 6.5 Singh G.S., Sharma C., Padhy S.S., Dinesan D., John B. WOS 0954-4100
348 Mitigation of thermal runaway in air cooled Li-ion batteries using a novel cell arrangement coupled with air flow improviser: A numerical investigation and optimization Anikrishnan M., Kannan C. WOS 1521-0626
349 Dithieno[3,2-B:2,3-D] Pyrrole: A Green Alternative For Stabilising The Synthesis Of Nano Polymers Vezhavendhan R., Reddy M.H., Medikondu N.R., Padmamalini N., Ismail Y., David A.G., Puthilibai G. Scopus 0209-4541
350 Incorporation of graphene nanoplatelets with organic phase change materials Studies on thermal conductivity enhancement, and thermal and chemical stability Vigneshwaran P., Shaik S., Arulmani S., Arc M., Alam T., Shaik A.H. Scopus 2666-2027
351 Laser processing techniques for surface property enhancement: Focus on material advancement S.A., D. D.W.R., Jain A., Kandasamy J., Singhal M. WOS 2468-0230
352 Hydrogen towards sustainable transition: A review of production, economic, environmental impact and scaling factors M A., G P.K. WOS 2590-1230
353 Performance enhancement of hydrokinetic turbine using augmentation techniques: a review Khan R., Kumar A. WOS 1543-5075
354 Tailoring polymer composites for critical thermal applications: a review on fibers, additives, coatings, aerogels, test methodologies Sakthi Balan G., Aravind Raj S., Shahar F.S., Hameed Sultan M.T. WOS 2574-089X
355 Future Potential of Quantum Computing and Simulations in Biological Science Pal S., Bhattacharya M., Dash S., Lee S.-S., Chakraborty C. WOS 1073-6085
356 Microwave irradiation pretreated fermentation of bioethanol production from Chlorella vulgaris Biomasses: Comparative analysis of response surface methodology and artificial neural network techniques Shenbagamuthuraman V., Kasianantham N. WOS 1873-2976
357 Optimization and production of renewable fuels from waste cooking oil and low- density polyethylene: Evaluating fuel properties and techno-economic feasibility of diesel replacement Sasidhar K.B., Somasundaram M., Yesuraj K., Hariharan S., Antunes E., Ekambaram P., Kumar Arumugam S. WOS 0196-8904
358 Surface nanocrystallization enhances the biomedical performance of additively manufactured stainless steel Ghosh S., Indrakumar S., Ghosh S., Gopal V., Nilawar S., Manivasagam G., Kesave J.S., Suwas S., Chatterjee K. WOS 2050-7518
359 Prediction of RCCI combustion fueled with CNG and algal biodiesel to sustain efficient diesel engines using machine learning techniques Ramachandran E., Krishnaiah R., Venkatesan E.P., Parida S., Reddy Dwarshala S.K., Khan S.A., Asif M., Linul E. WOS 2214-157X
360 Experimental investigation of TABS and all air system in tropical savanna climate: A thermal comfort and energy performance study Pai A., Kumar B. WOS 0378-7788
361 The impact of thermal insulation on the vulnerability of hollow masonry walls under elevated temperatures Kontoleon K.J., Saboor S., Mazzeo D., Pirouz B., Benzaama M.-H., Kotsovinos P., Arc M. WOS 0378-7788
362 Experimental investigations on a sustainable cogeneration system for power and desalination with 4-E analysis Rajesh S., Chiranjeevi C. WOS 0038-092X
363 Ultra-high-performance concrete with Iron ore tailings and non-metallic and hybrid fibers-A comprehensive experimental study Sujitha Magdalene P., Karthikeyan B., Selvaraj S.K., Deepika S., Alqaryouti Y., Seif ElDin H.M., Azab M. WOS 2214-5095
364 Prediction modeling using artificial neural network (ANN) for the performance and emission characteristics of catalytic co- pyrolytic fuel blended with diesel in a CI engine Mohan I., Das A.K., Prakash R., Kumar S. WOS 1614-7499
365 Prediction of pressure gradient and hold- up in horizontal liquid-liquid pipe flow Ahmed S.A., John B. WOS 1672-5107
366 Vibrational behavior of a 3D printed biomimetic dual-core composite sandwich beam: An experimental and numerical study Thanikasalam N., Ramamoorthy M. WOS 0272-8397
367 Mechanical and vibrational study of raw and surface-treated ramie fiber hybridized carbon fiber epoxy composites Samuel S.S., Issac Selvaraj R.V. WOS 0272-8397
368 Performance, emission and combustion characteristics of liquid fuel produced through catalytic co-pyrolysis of waste LDPE and Pongamia pinnata seeds: An experimental investigation in CI engine Mohan I., Yao Z., Das A.K., Prakash R., Kumar S. WOS 2590-1230
369 Electrochemical corrosion of stir cast and heat-treated magnesium alloy EV31A in different electrolytes: Analysis via X-ray photoelectron spectroscopy Somasundaram M., NarendraKumar U., Raja Annamalai A., Muthuchamy A. WOS 0254-0584
370 Assessment on the wear failure of additively manufactured stainless steel 316L with different scan pattern in simulated body fluid condition Prayer Riju R., Arulvel S. WOS 1350-6307
371 Fast Pyrolysis of Tea Bush, Walnut Shell, and Pine Cone Mixture: Effect of Pyrolysis Parameters on Pyrolysis Crop Yields Kar T., Kaygusuz Ö., Güney M.., Cuce E., Kele S., Shaik S., Owolabi A.B., Nsafon B.E.K., Ogunsua J.M., Huh J.-S. WOS 2071-1050
372 Energy and Exergy Analysis of a Combined Cooling Heating and Power System with Regeneration Jose J., Parthasarathy R.K., Arumugam S.K. WOS 2071-1050
373 Studies on process parameter optimization and surface modification for joint strength enhancement of laser welded Aluminium 5754-Polyamide hybrid joints Adarsh S.J., Natarajan A. WOS 2352-4928
374 Investigation on Flame and Spray Characteristics of Butanol and Lemon Peel Oil Blends With Gasoline Using Optical Engine Charlapally S.S., Biswal Y., Nayak G.M., Chinnadurai K., Balusamy S., Kasianantham N. WOS 0195-0738
375 Synthesis and Thermal Characterization of Solar Salt-Based Phase Change Composites with Graphene Nanoplatelets Vigneshwaran P., Shaik S., Suresh S., Arici M., Afzal A. WOS 1993-033X
376 Empirical Modeling and Meta-analysis of Heat Transfer in Plate Heat Exchangers Mukkamala Y., Dirker J. WOS 0145-7632
377 Optimal power split control strategy for plug-in biofuel-electric hybrid vehicle using improvised adaptive ECMS control algorithm Vignesh R., Harikrishnan A., Ashok B., Kumar M.S., Malewar R. WOS 1678-5878
378 Mechanical characterization of FDM printed bio-inspired double arrow head structures Sanjay A., Joshua R.N., Aravind Raj S. WOS 2631-8695
379 Role of Infrared Thermography in Planning and Monitoring of Head and Neck Microvascular Flap Reconstruction Chava S.K., Agrawal M., Vidya K., Janakiraman R., Palaniyandi K., Ramachandran O., Tirkey A.J. WOS 2169-7574
380 Influence of reverted austenite on fatigue life of 18 % nickel maraging steel [Einfluss von Reversionsaustenit auf die Ermüdungslebensdauer von martensitischem Stahl mit 18 % Nickelgehalt] Rohit B., Rao M N. WOS 0933-5137
381 Fossil energy reduction for heating and cooling of buildings using shallow geothermal integrated energy systems a comprehensive review KUMAR B., KUMAR B. WOS 2148-7847
382 A computational study of leading-edge wall cooling effect on shock waveboundary layer interaction in forward-facing step Vinoth Kumar P., Murugan J.N. WOS 2041-3025
383 Artificial Neural Network-Based Fault Diagnosis of Gearbox using Empirical Mode Decomposition from Vibration Response Mutra R.R., Reddy D.M., Amarnath M., Rani M.N.A., Yunus M.A., Sani M.S.M. WOS 2229-8649
384 Double-diffusive mixed convection with four heated square blocks for different working fluids in a square cavity Gnanasekaran M., Satheesh A. WOS 1040-7790
385 Applicability of double power law model for the statistical analysis of meteorological wind velocity time series data Bhardwaj S., Patil S., Joshi V.V. WOS 1752-5055
386 Synthesis and Empirical Analysis of the Thermophysical Characteristics of GO-Ag Aqueous Hybrid Nanofluid Using Environmentally Friendly Reducing and Stabilizing Agents Armstrong M., Sivasubramanian M., Selvapalam N., Pavitra R., Rajesh Kanna P., Lenin H. Scopus 1687-8434
387 Additive manufacturing TPMS lattice structures: Experimental study on airflow resistivity Chouhan G., Gunji B. Scopus 2590-048X
388 NANOFLUIDS IN PRODUCTION OF SUSTAINABLE BIOFUELS AND BIOPLASTICS Vezhavendhan R., Kanakavalli P.B., Arigela S.H., Chandrashekhar A., Sathish R., Joshi S.K., Isaac J.S. Scopus 0209-4541
389 Numerical-Experimental Analysis of Solar Liquid Flat-Plate Collector with Different HTF and Internal Grooves Profiles in the Absorber Duct Balamurali D., Natarajan M. Scopus 1934-9424
390 Fuelling the future: A review of non- renewable hydrogen production and storage techniques M A., V M.K., Hariharan V.S., Narahari T., P A.K., K M., G P.K., Prabakaran R. WOS 1364-0321
391 Nanocoatings for ballistic applications: A review Biradar A., Arulvel S., Kandasamy J., Hameed Sultan M.T., Shahar F.S., Najeeb M.I., Gaff M., Hui D. WOS 2191-9089
392 Transforming E-Waste into Opportunities: Driving Organizational Actions to Achieve Sustainable Development Goals Anuardo R.G., Espuny M., Costa A.C.F., Espuny A.L.G., Kazançolu Y., Kandsamy J., de Oliveira O.J. WOS 2071-1050
393 NiTi shape memory alloy: Unraveling the role of internal friction in passive damping A review Radhamani R., Balakrishnan M. WOS 2352-4928
394 A critical review on emulsion fuel formulation and its applicability in compression ignition engine Deepak B., Mohamed Ibrahim M. WOS 1759-7269
395 Progress in polymeric and metallic brake pads: A comprehensive review Bilvatej B., Naveen J., Karthikeyan N., Norrrahim M.N.F., Knight V.F., Jawaid M., Sultan M.T.H., Dagalahal M.R., Chandrasekar M., Loganathan T.M. WOS 1350-6501
396 Detailed experimentation and prediction of thermophysical properties in lauric acid- based nanocomposite phase change material using artificial neural network Thangapandian E., Palanisamy P., Selvaraj S.K., Chadha U., Khanna M. WOS 2352-1538
397 Combined mixture process design approach for flexible fuel maps development of ternary blends operated gasoline engine Pattanaik S., Savant A.S., Srivastava H., Jeevanantham A.K., Ramakrishnan P., Kasianantham N., Sakthivadivel D., Alaswad A., Awotwee T. WOS 0957-5820
398 Optimization of the effect of sinusoidal phase shift heating on mixed convective in an enclosure: LBM approach Satheesh A., Moolya S., Al Jadidi S., Kanna P.R., Taler D., Sobota T., Taler J. WOS 2214-157X
399 Selective laser melting of a novel 13Ni400 maraging steel: Material characterization and process optimization Patil V.V., Mohanty C.P., Prashanth K.G. WOS 2238-7854
400 Investigation on the effect of multiwalled carbon nanotubes in carbon fiber- reinforced epoxy composites manufactured using vacuum infusion process and hand layup process followed by vacuum bagging Varghese A.S., Sreekanth M.S. WOS 0272-8397
401 Developing a resilient and sustainable non- linear closed-loop supply chain management framework for the automotive sector industry using a gaussian fuzzy optimization based non- linear model predictive control approach Khot S.B., Thiagarajan S. WOS 2168-1015
402 Investigation into the Ideal Concoction for Performance and Emissions Enhancement of Jatropha Biodiesel-Diesel with CuO Nanoparticles Using Response Surface Methodology Ramachandran E., Krishnaiah R., Venkatesan E.P., Shaik S., Saleel C.A., Hussain F. WOS 2470-1343
403 Buckling of constant/variable stiffness curved arbitrary layup composite beams by renewed constitutive relations-based sine finite element with improved in-plane and transverse responses Polit O., Balaji L., Asha Kumar M., Manickam G. WOS 1537-6494
404 Investigations on compression behavior of fused filament fabricated hybrid biomimetic structures Aravind Raj S., Pulinat K.G., Sau S.K., Moss P.N., Sakthi Balan G. WOS 2041-3076
405 Characterization of 3D metal printed cutting tool with transpiration cooling channels Anuj Srivathsa S.S., Muralidharan B. WOS 2053-1591
406 Predicting the behavior of magnetorheological elastomer parameters on cutting performance during boring of AISI4340 steel using ANN Lawrance G., Paul P.S., Gunasegeran M., Sudhagar P.E. WOS 2520-8179
407 Experimental Investigation on Electrical Conductivity, Dielectric Properties, and EMI Shielding Effectiveness of NiP/Graphene- Coated Natural Fiber Mylsamy G., Krishnasamy P. WOS 0361-5235
408 Effect of magnetohydrodynamics and buoyancy ratio on thermosolutal double diffusion mixed convection in a cavity filled with liquid potassium alloy and Taguchi optimization with a linear regression model Manogaran G., Anbalagan S. WOS 1521-0634
409 Evaluation of metallurgical and mechanical properties of 12 mm thick aerospace grade MDN 250 steel by plasma ARC welding technique R A., M M. WOS 0954-4062
410 Improvised energy management control through neuro-fuzzy based adaptive ECMS approach for an optimal battery utilization in non-plugin parallel hybrid electric vehicle Rajasekar V., Ashok B. WOS 0954-4062
411 Purification and Characterization of Esterase Enzyme from Aspergillus Versicolor Aiswarya R., Vijayalakshmi S. WOS 1021-9986
412 Performance and emission analysis of a diesel engine fuelled with Juliflora biodiesel: a simulation and experimental study Musthafa B., Saravanan B., Vaibhav B., Muhammad P., Sam F., Asokan M.A. WOS 1448-4846
413 EXPERIMENTAL INVESTIGATION ON CNC MILLING AND MECHANICAL PERFORMANCE OF FIBER COATED WIRE MESH HYBRID COMPOSITES Thangamani J., Krishnasamy P. WOS 0218-625X
414 A MODIFIED HEURISTICS FOR THE BATCH SIZE OPTIMIZATION WITH COMBINED TIME IN A MASS-CUSTOMIZED MANUFACTURING SYSTEM Balamurugan A., Ranjitharamasamy S.P. WOS 1072-4761
415 Parametric Optimization in Hydroforming of Nimonic 90 Sheet using Cuckoo Search and Particle Swarm Optimization Ahamed J.F.A., Chinnaiyan P. Scopus 2349-0918
416 Geographical Information System (GIS)- Based Solar Photovoltaic Farm Site Suitability Using Multi-criteria Approach (MCA) in Southern Tamilnadu, India Vasudevan V., Gundabattini E., Gnanaraj S.D. Scopus 2250-0545
417 Overview of Chatbots with special emphasis on artificial intelligence-enabled ChatGPT in medical science Chakraborty C., Pal S., Bhattacharya M., Dash S., Lee S.-S. WOS 2624-8212
418 Carbon nanotubes as exceptional nanofillers in polymer and polymer/fiber nanocomposites: An extensive review Soni S.K., Thomas B., Thomas S.B., Tile P.S., Sakharwade S.G. WOS 2352-4928
419 A review on the recent applications of synthetic biopolymers in 3D printing for biomedical applications S S., R G A.P., Bajaj G., John A.E., Chandran S., Kumar V.V., Ramakrishna S. WOS 1573-4838
420 Tribocorrosion in biomaterials and control techniques: a review Puthillam U., Selvam R.E. WOS 0334-6005
421 A state-of-the-art review on advancements in phase change material encapsulation techniques for electronics cooling Venkatakrishnan P., Palanisamy P. WOS 1402-4896

2022

 

Sl No Title of paper Name of the author/s Indexed In Scopus / WOS/Pub Med / ICI / Non Scopus ISSN number
1 A comprehensive review on the current trends, challenges and future prospects for sustainable mobility Jeyaseelan T., Ekambaram P., Subramanian J., Shamim T. WOS 1364-0321
2 Combined effects of composite thermal energy storage and magnetic field to enhance productivity in solar desalination Dsilva Winfred Rufuss D., Arulvel S., Anil Kumar V., Davies P.A., Arunkumar T., Sathyamurthy R., Kabeel A.E., Anand Vishwanath M., Sai Charan Reddy D., Dutta A., Agrawal M., Vilas Hiwarkar V. WOS 0960-1481
3 Building glass retrofitting strategies in hot and dry climates: Cost savings on cooling, diurnal lighting, color rendering, and payback timeframes Shaik S., Maduru V.R., Kontoleon K.J., Arc M., Gorantla K., Afzal A. WOS 0360-5442
4 Integration of artificial neural network, multi-objective genetic algorithm and phenomenological combustion modelling for effective operation of biodiesel blends in an automotive engine Rajkumar S., Das A., Thangaraja J. WOS 0360-5443
5 State of art of valorising of diverse potential feedstocks for the production of alcohols and ethers: Current changes and perspectives Shenbagamuthuraman V., Patel A., Khanna S., Banerjee E., Parekh S., Karthick C., Ashok B., Velvizhi G., Nanthagopal K., Ong H.C. WOS 0045-6535
6 Multi-scale strengthening of co-cure joints through multiwall carbon nanotube modified adhesive and GFRP pins Dhilipkumar T., Rajesh M. WOS 2452-2139
7 Design and validation of additive manufactured catalytic converter for the control of regulated and unregulated emissions of a gasohol fuelled spark ignition engine Sathish Sharma G., Sugavaneswaran M., Prakash R. WOS 0016-2361
8 Effect of bubble coalescence on two- phase flow boiling heat transfer in raccoon microchannel - A numerical study Bhuva V.J., Jani J.P., Patel A., Tiwari N. WOS 0017-9310
9 Critical review on recent progress of ethanol fuelled flex-fuel engine characteristics Azhaganathan G., Bragadeshwaran A. WOS 1099-114X
10 Reviewing Performance Measures of the Die-Sinking Electrical Discharge Machining Process: Challenges and Future Scopes Shastri R.K., Mohanty C.P., Dash S., Gopal K.M.P., Annamalai A.R., Jen C.-P. WOS 2079-4991
11 Performance analysis of a novel thermal energy storage integrated solar dryer for drying of coconuts Radhakrishnan Govindan G., Sattanathan M., Muthiah M., Ranjitharamasamy S.P., Athikesavan M.M. WOS 0944-1344
12 The Impacts of Psychological Distress on Life Satisfaction and Wellbeing of the Indian General Population During the First and Second Waves of COVID- 19: A Comparative Study Lathabhavan R., Sudevan S. WOS 1557-1874
13 Effect of heat treatment on fatigue behaviour of stir-cast EV31A magnesium alloy Somasundaram M., Narendrakumar U., Raja Annamalai A. WOS 0167-577X
14 An impact of emulsified cottonseed biodiesel with Nano additives on low heat rejection engine Kautkar N.U., Premkartikkumar S.R. WOS 1387-585X
15 A critical evaluation of additive blended cashew nut shell liquid blended biodiesel performance in compression ignition engine Senthilkumar N., Raj P., Ranjitha J., Muniappan A. WOS 1387-585X
16 Scaling-up heterotrophic cultures of C. Pyrenoidosa microalgae for sustainable synthesis of low-density biodiesel mixtures and predict CI engine behavior at optimal proportions Jacob A., Ashok B., Ong H.C., Le P.T.K. WOS 1387-585X
17 Effect of manufacturing processes and multi-walled carbon nanotube loading on mechanical and dynamic properties of glass fiber reinforced composites Dhilipkumar T., Rajesh M. WOS 1548-0569
18 Influence of manufacturing process and GFRP pin loading on shear and dynamic behaviour of composite joints Dhilipkumar T., Rajesh M. WOS 1545-5823
19 Influence of heating modes on the microstructural and dielectric properties of calcium copper titanium oxide (CaCu3Ti4O12/CCTO) using conventional and microwave sintering Evangeline T.G., Annamalai A.R. WOS 0957-4522
20 Numerical prediction of the operating point for the cryogenic twin-screw hydrogen extruder system Verma S.K., Gupta V., Mukherjee S.S., Gangradey R., Srinivasan R., Arumugam S.K., Ravi Kumar P.S. WOS 0011-2275
21 Electropulsing-induced plastic deformation in an interstitial free steel Raut P., Fuloria D., Baka S., Chatterjee S., Ghosh C., Venkatramani N., Samajdar I. WOS 0267-0836
22 Determination of Discharge Distribution in Meandering Compound Channels Using Machine Learning Techniques Mohanta A., Pradhan A., Patra K.C. WOS 1943-4774
23 Effect of Compaction Pressure on the Physical, Mechanical, and Tribological Behavior of Compacted Crab Shell Particles Prepared Using Uniaxial Compaction Route Khan M.W., Elayaperumal A., Prabhu M.S., Arulvel S. WOS 1059-9495
24 A Review on Machine Learning Models in Injection Molding Machines Selvaraj S.K., Raj A., Rishikesh Mahadevan R., Chadha U., Paramasivam V. WOS 1687-8434
25 Advances in joining technologies for the innovation of 21st century lightweight aluminium-CFRP hybrid structures Sandeep R., Natarajan A. WOS 0954-4089
26 A crystal plasticity based approach to establish role of grain size and crystallographic texture in the TensionCompression yield asymmetry and strain hardening behavior of a MagnesiumSilverRare Earth alloy Mishra S., Khan F., Panigrahi S.K. WOS 2213-9567
27 A comprehensive review on mechanical and surface characteristics of composites reinforced with coated fibres Arulvel S., Mallikarjuna Reddy D., Dsilva Winfred Rufuss D., Akinaga T. WOS 2468-0230
28 A Cutting-Edge Survey of Tribological Behavior Evaluation Using Artificial and Computational Intelligence Models Selvaraj S.K., Raj A., Dharnidharka M., Chadha U., Sachdeva I., Kapruan C., Paramasivam V. WOS 1687-8434
29 Recent Advancements in the Field of Ni-Based Superalloys Selvaraj S.K., Sundaramali G., Jithin Dev S., Srii Swathish R., Karthikeyan R., Vijay Vishaal K.E., Paramasivam V. WOS 1687-8435
30 Thermal Comfort Optimization in an Electric Vehicle Jose S.S., Chidambaram R.K. SCOPUS 0392-8764
31 Wear Based Lifetime Estimation of a Clutch Facing using Coupled Field Analysis Kulkarni A., Mahale R., Kannan C. SCOPUS 2229-8649
32 OPTIMIZATION OF MATERIAL REMOVAL RETE OF AA6086T6 USING TAGUCHI BASED REGRESSION MODEL Tamiloli N., Venkatesan J., Kumar T.S. SCOPUS 2620-2832
33 Finite Element and Experimental Analysis of Residual Stresses in Electron Beam Welded Nickel-Based Superalloys Saju T., Velu M. SCOPUS 2642-2085
34 Design optimisation and development of thresher machine using artificial intelligence and machine learning Warghane R.S., Pillai R.E. SCOPUS 1755-9758
35 Model-based injector control map development to improve CRDi engine performance and emissions for eucalyptus biofuel Ashok B., Usman K.M., Vignesh R., Umar U.A. WOS 0360-5442
36 Insights into the surface and biocompatibility aspects of laser shock peened Ti-22Nb alloy for orthopedic implant applications Vishnu J., Ansheed A.R., Hameed P., Praveenkumar K., Pilz S., Andrea Alberta L., Swaroop S., Calin M., Gebert A., Manivasagam G. WOS 0169-4332
37 A framework for the sustainability implications of 3D bioprinting through nature-inspired materials and structures Whenish R., Ramakrishna S., Jaiswal A.K., Manivasagam G. WOS 2096-5524
38 Circular economy adoption challenges in medical waste management for sustainable development: An empirical study Kandasamy J., Kinare Y.P., Pawar M.T., Majumdar A., K.E.K. V., Agrawal R. WOS 1099-1719
39 A review of techniques for increasing the productivity of passive solar stills Chaurasiya P.K., Rajak U., Singh S.K., Nath Verma T., Sharma V.K., Kumar A., Shende V. WOS 2213-1388
40 Additive manufacturing of dental material parts via laser melting deposition: A review, technical issues, and future research directions Selvaraj S.K., Prasad S.K., Yasin S.Y., Subhash U.S., Verma P.S., Manikandan M., Dev S.J. WOS 1526-6125
41 Production of biodiesel from phoenix sylvestris oil: Process optimisation technique Vaidya G., Nalla B.T., Sharma D.K., Thangaraja J., Devarajan Y., Sorakka Ponnappan V. WOS 2352-5541
42 Thermo-hydraulic and entropy generation investigation of nano-encapsulated phase change material (NEPCM) slurry in hybrid wavy microchannel Doshi S., Kashyap G., Tiwari N. WOS 0961-5539
43 Proactive Maintenance Model Using Reinforcement Learning Algorithm in Rubber Industry Senthil C., Pandian R.S. WOS 2227-9717
44 An experimental and modelling analysis of cloud droplet growth from vehicular emissions with non-ideal microphysics over an Asian mega-city Gumber S., Ghosh S. WOS 1530-261X
45 A Comparative Analysis by Experimental Investigations on Normal and Ground Ultrafine Mineral Admixtures in Arresting Permeation in High-Strength Concrete Karthikeyan B., Selvaraj S.K., Dhinakaran G., Sundaramali G., Muthuswamy N., Paramasivam V. WOS 1687-8086
46 Friction stir welding of dissimilar alloy combinationsA Review ShivaKumar G.N., Rajamurugan G. WOS 0954-4062
47 Phase Change Materials in Metal Casting Processes: A Critical Review and Future Possibilities Chadha U., Selvaraj S.K., Pant H., Arora A., Shukla D., Sancheti I., Chadha A., Srivastava D., Khanna M., Ram Kishore S., Paramasivam V. WOS 1687-8434
48 Performance of air plasma sprayed Cr3C2-25NiCr and NiCrMoNb coated X8CrNiMoVNb16-13 alloy subjected to high temperature corrosion environment Subramani P., Sathishkumar M., Manikandan M., Selvaraj S.K., Sreenivasulu V., Arivazhagan N., Rajkumar S. WOS 2053-1591
49 Exploring Casting Defects of AA7075 Alloy in the Gravity Die Casting Simulation of an IC Engine Block Aneesh T., Pawan K., Mohan L., Hari Krishna P., Hotta T.K., Mohanty C.P., Gupta M. WOS 0954-4089
50 A review of the function of using carbon nanomaterials in membrane filtration for contaminant removal from wastewater Chadha U., Selvaraj S.K., Vishak Thanu S., Cholapadath V., Abraham A.M., Zaiyan M M., Manoharan M., Paramsivam V. WOS 2053-1591
51 Irreversibility analysis of various components in a supercritical thermal power plant Kumar G.N., Gundabattini E. WOS 1742-8297
52 Performance optimization of preheated palm oil-diesel blends using integrated response surface methodology and analysis of variance Nagaraja S., Dsilva Winfred Rufuss D. SCOPUS 1878-8181
53 Modelling the strategies for improving maturity and resilience in medical oxygen supply chain through digital technologies K.E.K V., Nadeem S.P., Meledathu Sunil S., Suresh G., Sanjeev N., Kandasamy J. SCOPUS 2398-5364
54 Simulation and experimental study on effect of surface residual stresses in dry orthogonal micro turning sample Kiran B., Nagaraju D. SCOPUS 1448-4846
55 Experimental investigation of methane gas generation using textile effluents Sathish S., Vijay Samuel G., Balaji K., John Presin Kumar A. SCOPUS 2162-8246
56 Advances in materials and fabrication of separators in supercapacitors Ahankari S., Lasrado D., Subramaniam R. SCOPUS 2633-5409
57 Electrode Materials for Supercapacitors in Hybrid Electric Vehicles: Challenges and Current Progress Rajagopal S., Pulapparambil Vallikkattil R., Mohamed Ibrahim M., Velev D.G. SCOPUS 2410-3896
58 Performance evaluation of 3D printing technologies: a review, recent advances, current challenges, and future directions Chadha U., Abrol A., Vora N.P., Tiwari A., Shanker S.K., Selvaraj S.K. SCOPUS 2363-9512
59 Influence of post-injection parameters on the performance of continuous regeneration trap to mitigate greenhouse gas and particulate emissions from CI engine Jacob A., Ashok B., Usman K.M., Kulla D.M. WOS 0360-5442
60 Towards motion planning of humanoids using a fuzzy embedded neural network approach Muni M.K., Parhi D.R., Kumar P.B., Sahu C., Kumar S. WOS 1568-4946
61 Enhancement of biofuel engine characteristics through cyclic variation and multi-variate effect of split injection parameters Vignesh R., Ashok B. WOS 0016-2361
62 Impact of exhaust gas recirculation and split injection strategy combustion behavior on premixed charge compression ignition engine fuelled with moringa oleifera methyl ester Ramalingam S., Babu D., Santhoshkumar A., Deepakkumar R., Ravikanth D. WOS 0016-2361
63 Split injection strategies based RCCI combustion analysis with waste cooking oil biofuel and methanol in an open ECU assisted CRDI engine Ganesan N., Viswanathan K., Karthic S.V., Ekambaram P., Wu W., Vo D.-V.N. WOS 0016-2361
64 Production of Chlorella pyrenoidosa biodiesel by heterotrophic pathway to improve CI engine output characteristics using statistical approaches Jacob A., Ashok B., Usman K.M. WOS 0957-5820
65 Selective laser melting of AlSi10Mg alloy: microstructural studies and mechanical properties assessment Ashwath P., Xavior M.A., Batako A., Jeyapandiarajan P., Joel J. WOS 2238-7854
66 Analysing the drivers for adoption of Industry 4.0 technologies in a functional paper cement sugar circular sharing network Vimal K.E.K., Churi K., Kandasamy J. WOS 2352-5509
67 Experimental based comparative exergy analysis of a spark-ignition Honda GX270 Genset engine fueled with LPG and syngas Ganesan N., Sahoo B.B., Ekambaram P., Elumalai P.V., Samuel O.D., Enweremadu C.C., Afzal A., Saleel C.A. WOS 2050-0505
68 Influence of aspect ratio on the wake dynamics of a pitching wing Vineeth V.K., Patel D.K. WOS 1070-6631
69 Facile eco-friendly synthesis of rare- earth cobaltite-based perovskite nanostructures as electrocatalysts for oxygen evolution reaction Nandhakumar E., Selvakumar P., Sasikumar A., Prem kumar M., Vivek E., Kamatchi R. WOS 0167-577X
70 Fatigue and corrosion resistance of low modulus Ti-35Nb-7Zr-5Ta-0.35O beta Ti alloy for orthopedic implant applications Vishnu J., Manivasagam G., Rao N., Rack H.J. WOS 2352-4928
71 Numerical and experimental investigations of novel nature inspired open lattice cellular structures for enhanced stiffness and specific energy absorption Dara A., Bahubalendruni M.A.R., Johnney Mertens A., Balamurali G. WOS 2352-4928
72 Floating PVs in Terms of Power Generation, Environmental Aspects, Market Potential, and Challenges Cuce E., Cuce P.M., Saboor S., Ghosh A., Sheikhnejad Y. WOS 2071-1050
73 Experimental and numerical study of transverse shear modulus for bioinspired glass fiber-reinforced polymer sandwich core Gunasegeran M., Sudhagar P. E. WOS 0272-8397
74 Investigation of physical, flexural, and dynamic mechanical properties of alumina and graphene nanoplatelets filled epoxy nanocomposites Kesavulu A., Mohanty A. WOS 0272-8397
75 Investigations into the Combined Effect of Mahua Biodiesel Blends and Biogas in a Dual Fuel Engine Kshatriya A.S., Tiwari P., Sreekanth M., Yunus Khan T.M., Khadar S.D.A., Mansour M., Feroskhan M. WOS 1996-1073
76 Quick Predictions of Onset Times and Rain Amounts from Monsoon Showers over Urban Built Environments Gumber S., Ghosh S. WOS 2073-4433
77 Crack detection methodology in rotor bearing system by DWT based adaptive neuro-fuzzy inference systems Babu Rao K., Mallikarjuna Reddy D. WOS 0003-682X
78 The Effects of Electroless NiP- Coated SiC and Al2O3 on Wear Behaviour and Thermal Stability of AMMCs Chandrasekar P., Nagaraju D. WOS 2191-4281
79 On the importance of non-ideal sulphate processing of multi- component aerosol haze over urban areas Gumber S., Ghosh S., Bera S., Prabhakaran T.V. WOS 0177-7971
80 Residual Stress Distribution, Phase Transformation, and Wettability Characteristics of Laser Peened Austenitic Stainless Steel Praveenkumar K., Swaroop S., Manivasagam G. WOS 1059-9495
81 The Effect of Electroless NiP-Coated Al2O3 on Mechanical and Tribological Properties of Scrap Al Alloy MMCs Chandrasekar P., Nagaraju D. WOS 1939-5981
82 Performance analysis of nano- refrigerants used in the vapor compression refrigeration system using MATLAB-Simulink Katoch A., Razak F.A., Suresh A., BS B., Gundabattini E. WOS 0954-4062
83 Complex Nanomaterials in Catalysis for Chemically Significant Applications: From Synthesis and Hydrocarbon Processing to Renewable Energy Applications Chadha U., Selvaraj S.K., Ashokan H., Hariharan S.P., Mathew Paul V., Venkatarangan V., Paramasivam V. WOS 1687-8442
84 Hot corrosion behaviour of constant and pulsed current welded Hastelloy X in Na2SO4, V2O5, and NaCl salt mixture at 900 °C Sathishkumar M., Manikandan M., Arivazhagan N., Arulmurugan B., Kumaran Selvaraj S., Vignesh M., Rajakumar S., Rajkumar S. WOS 2053-1591
85 Performance analysis of lauric acid embedded with nanoparticles as phase change materials in heat transfer applications Elangovan T., Palanisamy P. WOS 0954-4089
86 Nanomaterials for Electromagnetic Interference Shielding Applications: A Review Tiwari A., Tiwari A., Bhatia A., Chadha U., Kandregula S., Selvaraj S.K., Bhardwaj P. WOS 1793-2920
87 Critical analysis on the implementation barriers and consumer perception toward future electric mobility Chidambaram K., Ashok B., Vignesh R., Deepak C., Ramesh R., Narendhra T.M.V., Muhammad Usman K., Kavitha C. WOS 0954-4070
88 Numerical study of unmanned aerial vehicle (UAV) in dry microburst environment using large eddy simulation (LES) model Somashekar V., Immanuel Selwynraj A. WOS 22667
89 Effect of Rhenium and Gadolinium Additions on the Mechanical Properties of Ti-48Al-2Cr-2Nb Sintered Through Spark Plasma Sintering Srikanth M., Siva T., Annamalai A.R. WOS 1573-9325
90 Advantages of Taguchi Method compared to Response Surface Methodology for achieving the Best Surface Finish in Wire Electrical Discharge Machining (WEDM) Kandala A.V.U.K., Solomon D.G., Arulraj J.J. SCOPUS 1823-5514
91 General practice to enhance bast fiber composite properties for state of art applications-A Review Krishnasamy P., Rajamurugan G., Muralidharan B., Krishnaiah R. SCOPUS 2631-8695
92 Graphene and g-C3N4-Based Gas Sensors Kotbi A., Imran M., Kaja K., Rahaman A., Ressami E.M., Lejeune M., Lakssir B., Jouiad M. SCOPUS 1475-7435
93 Studies on Parameters affecting Flow Behaviour of High-Concentration Ash Slurry: Effect of a Natural Drag reducing Agent on Pumping Power during Pipeline Transportation Senapati S., Mohanty A. SCOPUS 2250-0545
94 Polymer dispersed liquid crystal retrofitted smart switchable glazing: Energy saving, diurnal illumination, and CO2 mitigation prospective Shaik S., Nundy S., Maduru V.R., Ghosh A., Afzal A. WOS 0959-6526
95 Biofuel powered engine characteristics improvement through split injection parameter multivariate optimization with titanium based nano- particle additives Sathish Kumar T, Ashok B., Senthil Kumar M., Vignesh R., Saiteja P., Ramachandra Bhat Hire K., Harshal Tote M., Pandey R., Jadhav A., Gupta A., Rastogi D., Ayyasamy T. WOS 0016-2361
96 Precise prediction of performance and emission of a waste derived Biogas Biodiesel powered DualFuel engine using modern ensemble Boosted regression Tree: A critique to Artificial neural network Sharma P, Sahoo B.B. WOS 0016-2361
97 Evaluation of performance, emissions and combustion attributes of CI engine using palmyra biodiesel blend with distinct compression ratios, EGR rates and nano-particles Perumalla Vijaya Kumar, Ashok B., Kumar M.S., Vignesh R., Bhasker J.P., Kumar A.N. WOS 0016-2361
98 Building energy analysis using EC and PDLC based smart switchable window in Oman Chidubem Iluyemi D., Nundy S., Shaik S., Tahir A., Ghosh A. WOS 0038-092X
99 Synergistic effect of post injection and CART unit in extenuating Tail-Pipe pollutants in CI engine using C. pyrenoidosa microalgae biodiesel Jacob A, Ashok B., Muhammad Usman K., Bupesh Raja V.K., Jino L. WOS 2213-1388
100 Numerical analysis and machine learning for battery thermal performance cooled with different fluids Afzal A., Kumar R., Jilte R.D., Samee M., Shaik S., Abdul Razak R.K., Manokar A.M., Saleel C.A. WOS 0363-907X
101 Planar perovskite solar cells: Plasmonic nanoparticles-modified ZnO as an electron transport layer for enhancing the device performance and stability at ambient conditions Eswaramoorthy N., Rajaram K. WOS 0363-907X
102 Experimental investigation of erosion corrosion performance and slurry erosion mechanism of HVOF sprayed WC-10Co coatings using design of experiment approach Ribu D.C., Rajesh R., Thirumalaikumarasamy D., Kaladgi A.R., Saleel C.A., Nisar K.S., Shaik S., Afzal A. WOS 2238-7854
103 Instability attenuation and bifurcation studies of a non-ideal rotor involving time-delayed feedback Dasgupta S.S. WOS 0924-090X
104 Vibration and tribological behaviour of flax/wire mesh/hemp composite reinforced with WCFC particles Singh C Q.J., Rajamurugan G. WOS 1526-6125
105 Vibration analysis of composite exhaust manifold for diesel engine using CFD Ramesh Kumar R., Razak A., Alshahrani S., Sharma A., Thakur D., Shaik S., Saleel C.A., Afzal A. WOS 2214-157X
106 Ultrasonication time optimization for multi-walled carbon nanotube based Therminol-55 nanofluid: an experimental investigation Kumar P.G., Prabakaran R., Sakthivadivel D., Somasundaram P., Vigneswaran V.S., Kim S.C. WOS 0022-5215
107 Effect of Prosopis Juliflora Thorns on Mechanical Properties of Plastic Waste Reinforced Epoxy Composites Ganapathy S.B., Sakthivel A.R., Sultan M.T.H., Shahar F.S., Shah A.U.M., Khan T., Sebaey T.A. WOS 2073-4360
108 Energy and environmental analysis of a solar evacuated tube heat pipe integrated thermoelectric generator using IoT Manivannan S.P.,( TRA- 16771) Gunasekaran D.L.,(TRA -17209) Jaganathan G., Natesan S., Muthusamy S.M., Kim S.C., Kumar B., Poongavanam G.K., Duraisamy S. WOS 0944-1344
109 A review on ferrofluids with the effect of MHD and entropy generation due to convective heat transfer Devi N.R., Moolya S., Öztop H.F., Abu- Hamdeh N., Padmanathan P., Satheesh A. WOS 2190-5444
110 Performance Analysis of Three Side Roughened Solar Air Heater: A Preliminary Investigation Behura A.K., Mohanty C.P., Singh M.R., Kumar A., Linul E., Rajak D.K. WOS 1996-1944
111 Comparative Analysis on Dehumidification Performance of KCOOHLiCl Hybrid Liquid Desiccant Air-Conditioning System: An Energy- Saving Approach Kumar K., Singh A., Shaik S., Saleel C.A., Aabid A., Baig M. WOS 2071-1050
112 Free and forced vibration analysis of 3D printed bioinspired sandwich beam using HSDT: Numerical and experimental study Gunasegeran M., (TRA- 16766) Edwin Sudhagar P. WOS 0272-8397
113 Biosynthesis of Amyl Alcohol From Scenedesmus quadricauda Microalgae for Light Commercial Vehicle Compression Ignition Engine Using Prediction Models Jacob A., (TRA- 16066) Ashok B. WOS 0195-0738
114 Bioinspired Techniques in Freeze Casting: A Survey of Processes, Current Advances, and Future Directions Chadha U., Selvaraj S.K., Ravinuthala A.K., Maddini Y., Arasu K., Yadav S., Kumari O., Pant S., Paramasivam V. WOS 1687-9422
115 Influence of glass fibre reinforced polymer composite pin reinforcement on shear and dynamic behaviour of composite joint manufactured through co-cure technique Dhilipkumar T., (TRA-16639) Rajesh M. WOS 0021-9983
116 Prevalence of Thanatophobia and Necrophobia in India during the COVID-19 Pandemic Due to Black Fungus Infections Shekhar S.K., Jose T.P. WOS 0033-2747
117 Fault Diagnosis in Bevel Gearbox Using Coiflet Wavelet and Fault Classification Based on ANN Including DNN Babu T.N., Ali P.S.N., Prabha D.R., Mohammed V.N., Wahab R.S., Vijayalakshmi S. WOS 2193-567X
118 An optimization-based identification study of cylindrical floating ring journal bearing system in automotive turbochargers Mutra R.R., Srinivas J. WOS 0025-6455
119 Machining of Y2O3 reinforced magnesium rare earth alloys using wire electrical discharge turning process Vignesh M., Ramanujam R., Parande G., Gupta M. WOS 1091-0344
120 Influence of process parameters and its effects on friction stir welding of dissimilar aluminium alloy and its compositesa review Uday K.N., (TRA-16643) Rajamurugan G. WOS 0169-4243
121 Surface and subsurface investigation of Al-Mg-MoS2composite on performing wire electrical discharge machining Senthil Kumar S., Sudhakara Pandian R., Pitchipoo P., Narayanasamy P., Senthilkumar T.S. WOS 2051-672X
122 In-Situ Surface Roughness Evaluation of Surfaces Machined with EDM by Image Processing Ali J.M., Jailani H.S., Murugan M. WOS 1573-4862
123 Effect of Passive Flow Control Devices on Base Pressure for Mach Numbers Between 0.5 and 1.4 Jayaprakash Narayan M., Chutkey K., Sri Raghu R., Verma S.B. WOS 0098-2202
124 Steady-State and Bifurcation Analysis of Nonlinear Jumps in a Non-ideal Rotor System Using Magnetorheological Fluid Dampers Jha A.K., (TRA- 15661) Dasgupta S.S. WOS 2523-3920
125 A Review on the Role of Tunable Q- Factor Wavelet Transform in Fault Diagnosis of Rolling Element Bearings Anwarsha A.,(TRA- 19PHD0258) Narendiranath Babu T. WOS 2523-3920
126 Influence of hot corrosion on pulsed current gas tungsten arc weldment of aerospace-grade 80A alloy exposed to high temperature aggressive environment Subramani P., Arivazhagan N., Selvaraj S.K., Mancin S., Manikandan M. SCOPUS 2706-9885
127 Yaw Stability Analysis of a Tractor Semitrailer Using Yaw Plane Model Arjunkumar, Paramhans R., Palanivelu S. SCOPUS 0975-3060
128 Taguchi optimization of process parameters used for improving tribological behaviour of graphene nanoparticle dispersed nanolubricant Raghavulu K.V.,(TRA-13976) Govindha Rasu N. SCOPUS 2631-8695
129 Influence and relation of sustainability drivers in footwear manufacturing firms using structural equation modelling Jayakrishna K., Raj S.A. SCOPUS 1478-8764
130 Anisotropy of Additively Manufactured Co-28Cr-6Mo Influences Mechanical Properties and Biomedical Performance Acharya S., Gopal V., Gupta S.K., Nilawar S., Manivasagam G., Suwas S., Chatterjee K. WOS 1944-8244
131 Coupling wastewater valorization with sustainable biofuel production: Comparison of lab- and pilot-scale biomass yields of Chlorella sorokiniana grown in wastewater under photoautotrophic and mixotrophic conditions Qurat-ul-Ain, Javid A., Ali S., Hasan A., Senthilkumar N., Ranjitha J., Hussain A. WOS 0045-6535
132 Lotus seedpods biochar decorated molybdenum disulfide for portable, flexible, outdoor and inexpensive sensing of hyperin Rao L., Zhu Y., Duan Z., Xue T., Duan X., Wen Y., Kumar A.S., Zhang W., Xu J., Hojjati-Najafabadi A. WOS 0045-6536
133 Enhancement of engine characteristics through zirconium nano particle addition and split injection parameter optimization for the adaptability of eucalyptus biofuel in diesel engine Sathish Kumar T., (TRA- 16783) Ashok B., Senthilkumar M., Saiteja P(TRA-13339)., Vignesh R (TRA - )., Karthick C (TRA-16423)., Nithin P.S., Durairaj K., Saju N., Agarwal C., Bhutani S., Gadwe J. WOS 0016-2361
134 Progress on compatibility issues of alcohols on automotive materials: Kinetics, challenges and future prospects- a comprehensive review Muthuraman V.S (TRA-17222)., Patel A., Shreya V., Vaidyanathan A., Reshwanth K.N.G.L., Karthick C (TRA-16423)., Jacqueline P.J., Jan Gca M., Ashok B., Sivagami K., Nanthagopal K. WOS 0957-5820
135 Application of machine learning and Box- Behnken design in optimizing engine characteristics operated with a dual-fuel mode of algal biodiesel and waste- derived biogas Sharma P., Sahoo B.B., Said Z., Hadiyanto H., Nguyen X.P., Nieti S., Huang Z., Hoang A.T., Li C. WOS 0360-3199
136 An ANFIS-RSM based modeling and multi- objective optimization of syngas powered dual-fuel engine Sharma P., Sahoo B.B. WOS 0360-3200
137 A survey on multi-criterion decision parameters, integration layout, storage technologies, sizing methodologies and control strategies for integrated renewable energy system Mishra S., Saini G., Saha S., Chauhan A., Kumar A., Maity S. WOS 2213-1388
138 Cellulosic Microfiber Extraction from Ecofriendly Bahunia Racemosa and Its Characterization Aseer J.R., K S., Bahubalendruni M.V.A.R., Karakoti A., S R.E., Nb K.B. WOS 1544-0478
139 Low-Velocity Impact and Compression after Impact Properties of Hemp and Jute Fiber Reinforced Epoxy Composites Patil S., Mallikarjuna Reddy D., Naveen J., Swamy S.S., Vignesh P., Venkatachalam G. WOS 1544-0479
140 Green microalgal strain Chlorella vulgaris isolated from industrial wastewater with remediation capacity Rajivgandhi G., Ramachandran G., Chelliah C.K., Maruthupandy M., Quero F., S V., AL- Mekhlafi F.A., Wadaan M.A., Ranjitha J., Li W.-J. WOS 2352-1864
141 Statistical analysis of fuidized dense phase conveying of fine particles JS S (TRA-13618)., Behera N. WOS 0032-5910
142 A neem oil-based biodiesel with DEE enriched ethanol and Al2O3nano additive: An experimental investigation on the diesel engine performance Sakthivadivel D., Ganesh Kumar P., Prabakaran R., Vigneswaran V.S., Nithyanandhan K., Kim S.C. WOS 2214-157X
143 Time domain and frequency domain of coated milling inserts using FFT spectrum Tamiloli N., Venkatesan J., Raja Raghu Vamsi Krishna P., Sampath Kumar T. WOS 1042-6914
144 A novel long term solar photovoltaic power forecasting approach using LSTM with Nadam optimizer: A case study of India Sharma J., Soni S., Paliwal P., Saboor S., Chaurasiya P.K., Sharifpur M., Khalilpoor N., Afzal A. WOS 2050-0505
145 A comprehensive damping study of variable stiffness composite rectangular/skew laminates reinforcement with curvilinear fibers by higher-order shear flexible model Mohamed H., Gunasekaran V., Pitchaimani J., Rajamohan V., Kotriwar G., Manickam G. WOS 1537-6494
146 Microstructural characteristics and mechanical properties of thermally sprayed conventional ceramic coatings reinforced with multiwalled carbon nanotubes Kalangi C., Bolleddu V. WOS 0731-6844
147 Long term accelerated influence on thermo-mechanical properties of glass/carbon fiber reinforced interpenetrating polymer network hybrid composites Priya K.S., Vijaya Kumar K.R., Suresh G., Ganesamoorthy R., Vezhavendhan R., Meenakshi C.M. WOS 0731-6845
148 Navigational strategy of a biped robot using regression-adaptive PSO approach Sahu C., Parhi D.R. WOS 1432-7643
149 Evaluation of Microstructure, Residual Stress, and Mechanical Properties in Different Planes of Wire + Arc Additive Manufactured Nickel-Based Superalloy Kumar M.D.B(TRA - 16776)., Manikandan M. WOS 1598-9623
150 Real-Time testing of novel robust digital pitch controller for digital hydraulic pitch system in wind turbine Narayanan V.L., Ramakrishnan R., Rengaswamy R. WOS 1556-7036
151 Investigation of DualPass Inclined Oscillating Bed Solar Dryer for Drying of Non-Parboiled Paddy Grains Arul G.P., Thulasi S., Kumar P., Arunprasad V., Shaik S., Abbas M., Rajendran P., Khan S.A., Saleel C.A. WOS 2071-1050
152 Assessment of the Thermo-Hydraulic Efficiency of an Indoor-Designed Jet Impingement Solar Thermal Collector Roughened with Single Discrete Arc- Shaped Ribs Kumar R., Cuce E., Kumar S., Thapa S., Gupta P., Goel B., Saleel C.A., Shaik S. WOS 2071-1051
153 Tool life and surface integrity characteristics in milling of SLM and C&W inconel 718 in dry and MQL condition Periane Natarajan S., Vaudreuil S., Chibane H., Morandeau A., Xavior M.A., Cormier J., Leroy R., Duchosal A. WOS 0268-3768
154 Prediction of influences of size and locations of delamination on dynamic characteristics of laminated composite plate using particle swarm optimization and artificial neural network Arun Kumar K (TRA-14461)., Arumugam A.B., Mallikarjuna Reddy D., Edwin Sudhagar P., Anbumani P., Kassa M.K., Agarwal D. WOS 1548-0569
155 Resilience strategies to recover from the cascading ripple effect in a copper supply chain through project management K.E.K V., Nadeem S.P., Ravichandran M., Ethirajan M (TRA-14802)., Kandasamy J. WOS 1936-9735
156 Partial Substitution of Binding Material by Bentonite Clay (BC) in Concrete: A Review Ahmad J., Kontoleon K.J., Al-Mulali M.Z., Shaik S., Ouni M.H.E., El-Shorbagy M.A. WOS 2075-5309
157 Structural-Acoustic Response Analysis of Variable Stiffness Laminates with Inherent Material Damping Gunasekaran V., Gulhane S., Gupta S., Pitchaimani J., Rajamohan V., Manickam G. WOS 0219-4554
158 Investigation on Mechanical Properties of Bamboo and Coconut Fiber with Epoxy Hybrid Polymer Composite Raman V.V., Kumar P.S., Sunagar P., Bommanna K., Vezhavendhan R., Bhattacharya S., Prabhu S.V., Sasikumar B. WOS 0730-6679
159 Review on the advancements and relevance of emerging joining techniques for aluminium to polymers/carbon fibre- reinforced polymer lightweight hybrid structures Adarsh S.J (TRA-16782)., Natarajan A. WOS 1464-4207
160 Investigation of graphene nanoplatelets- deposited textured metal matrix composite plates for improved mechanical properties: a numerical approach Singhal M., Jain A., Thomas B., Swain A. WOS 1678-5878
161 Influence of filler content and surface modification on physical and mechanical properties of epoxy/walnut shell particulate composites Shejkar S.K., Agrawal B., Agrawal A., Gupta G., Pati P.R. WOS 0169-4243
162 Review - Chemical Structures and Stability of Carbon-doped Graphene Nanomaterials and the Growth Temperature of Carbon Nanomaterials Grown by Chemical Vapor Deposition for Electrochemical Catalysis Reactions Chadha U., Sinha S., Jonna J., Goswami M., Ghani H., Nair K., Pandey N., Kataray T., Selvaraj S.K., Bhardwaj P., Banavoth M., Sonar P. WOS 2162-8769
163 Characterization of Welded Joints of Dissimilar Nickel-Based Superalloys by Electron Beam and Rotary Friction Welding Saju T(TRA-16637)., Velu M. WOS 1059-9495
164 A thermophysical modelling of electric discharge coating process Kumaran V., Muralidharan B. WOS 0954-4062
165 Experimental and Mathematical Studies for Optimality of GTAW Parameters on Similar and Dissimilar Steel Substrates Kiran B., Nagaraju D., Selvaraj S.K., Molla B. WOS 1687-8434
166 Experimental Investigation of Sorghum Stalk and Sugarcane Bagasse Hybrid Composite for Particleboard Adefris Legesse A., Desalegn D., Selvaraj S.K., Paramasivam V., Chadha U. WOS 1687-8435
167 A novel nature inspired 3D open lattice structure for specific energy absorption Ashok D., Raju Bahubalendruni M.V.A., Johnney Mertens A., Balamurali G. WOS 2041-3009
168 Mental Health Concerns of Dowry Harassment Survivors in India: A Multi- Level Mixed Method Study Lathabhavan R., Joy G.V., Sudevan S. WOS 1532-5024
169 Computational study of combined effects of tip leakage jets and wetness on the performance of steam turbine exhaust system using actuator disc model Sadasivan S., Arumugam S.K., Aggarwal M.C. WOS 1468-4349
170 Austempering of PM HSS ASP2030 for improved fracture toughness Firouzi A., Yazdani S., Tavangar R., Shakerifard B., Mohammad F.K. WOS 2271-3646
171 Aerodynamic study of low Reynolds number airfoil and mini-unmanned aerial vehicle in simulated rain environment V S (TRA-14747)., A I.S. WOS 0002-2667
172 Dental composite resin: a review of major mechanical properties, measurements and its influencing factors [Zahnmedizinischer Kompositharz: Eine Übersicht über wesentliche mechanische Eigenschaften, Messungen und ihre beeinflussenden Faktoren] Suryawanshi A (TRA-17PHD0269)., Behera N. WOS 1521-4052
173 Machinability of Titanium alloy 6242 by AWJM through Taguchi method Perumal A., Kailasanathan C., Wilson V.H., Sampath Kumar T., Stalin B., Rajkumar P.R. SCOPUS 2214-7853
174 Experimental Modal Analysis of Radiator Fan Module to Predict its Influence of Structural Characteristics on Vibration and Noise Contribution Venugopal K., Halder P., Susarla V., Palanivelu S. SCOPUS 1735-9244
175 A Survey of Applications of MFC and Recent Progress of Artificial Intelligence and Machine Learning Techniques and Applications, with competing fuel cells Gyaneshwar A., Selvaraj S.K., Ghimire T., Mishra S.J., Gupta S., Chadha U., Manoharan M., Paramasivam V. SCOPUS 2631-8695
176 Enhancing the energy efficiency of a supercritical thermal power plant through improved plant load factor, and optimized performance of auxiliary equipment Gavirineni N.K (TRA-14PHD0278)., Gundabattini E. SCOPUS 1755-7437
177 A computational investigation for the impact of particle size on the mechanical and thermal properties of teak wood dust (TWD) filled polyester composites Pradhan P., Purohit A., Sangita Mohapatra S., Subudhi C., Das M., Ku Singh N., Bhusan Sahoo B. SCOPUS 2214-7853
178 Application of integrated environmentally failure modes and effects analysis and environmentally conscious quality function deployment for sustainable product design Vimal K.E.K., Mathiyazhagan K., Manojkummar M., Rajyalakshmi G., Rajan A.J., Kandasamy J. SCOPUS 1758-9398
179 Investigation on elevation of sloshing liquid in the square tank under excitation using CFD and RSM Bageerathan T., Rajagopal T.K.R. SCOPUS 1466-2132
180 Investigating the effect of carbon tax on sharing network participation K.E.K V., Raja S., Yendeti V.S.P(17BME0457)., Kancharla A(17BME0828)., Kandasamy J. SCOPUS 1746-5664
181 qA review of Thermal, Physical, electrical properties of spider silk and their experimental setups Maithani A(18BME0775)., Sahni I(17BME0899)., Joshi V.V. SCOPUS 2214-7855
182 Comparative studies on weldability and mechanical characteristics of semi- killed steel using different arc welding technique Muthukumaran N., Kathiresan G., Shree Raam M.N., Chandru G., Dineshkumar S., Chiranjeevi K., Rajkumar S., Manikandan M., Arulmurugan B. SCOPUS 2214-7855
183 Experimental Study of an Eco-friendly Turning Process of Nimonic 75 Combining Minimum Quantity Lubrication and Hexagonal Boron Nitride-Enhanced Neem and Jatropha Oil Nanofluids Kannan V. SCOPUS 2250-0545
184 Development of SS 304L composite coatings on mild steel substrate using friction surfacing and wear characterization Rajoria V(18BME0022)., Nain G(18BME0692)., Vijayan S., Prasad C.H., Damodaram R., Karthik G.M., Khan F. SCOPUS 2214-7855
185 Physical and mechanical characterization of marble Dust/Wheat straw fiber filled polymer composites Girge A., Goel V(18BME0708)., Amish A (18BME0694)., Gupta G. SCOPUS 2214-7855
186 Additive Manufacturing of Supercapacitor Electrodes-Materials, Methods and Design Nargatti K., Ahankari S. SCOPUS 1013-9826
187 Improvements on hot corrosion behaviour of HVOF coated CO2laser beam and pulsed gas tungsten arc weldments in 2.5% sulphur gas plus molten salt in industrial waste incinerator environment Roshith P., Arivarasu M. SCOPUS 2631-8695
188 Advances in forward osmosis (FO) technology for enhanced efficiency and output: A critical review Dsilva Winfred Rufuss D., Kapoor V., Arulvel S., Davies P.A. SCOPUS 0959-6526
189 Study on interactive effects of CRDi engine operating parameters through RSM based multi-objective optimization technique for biofuel application Saiteja P., Ashok B. SCOPUS 0360-5442
190 Application of statistical approaches in IC engine calibration to enhance the performance and emission Characteristics: A methodological review Sathish Kumar T(TRA-16783)., Vignesh R., Ashok B., Saiteja P., Jacob A(TRA-16066)., Karthick C(TRA-18943)., Jeevanantham A.K., Senthilkumar M., Muhammad Usman K. SCOPUS 0016-2361
191 Investigation on the thermal management of solar photo voltaic cells cooled by phase change material Sheik M.A., Aravindan M.K., Beemkumar N., Chaurasiya P.K., Jilte R., Shaik S., Afzal A. SCOPUS 2352-152X
192 UV coated acrylics as a substitute for generic glazing in buildings of Indian climatic conditions: Prospective for energy savings, CO2 abatement, and visual acceptability Ramana Maduru V., Shaik S., Cuce E., Afzal A., Panchal H., Mert Cuce P. SCOPUS 0378-7788
193 Phase change material incorporation techniques in building envelopes for enhancing the building thermal Comfort- A review Suresh C., Kumar Hotta T., Saha S.K. SCOPUS 0378-7788
194 A Review on Natural Plant Fiber Epoxy and Polyester CompositesCoating and Performances Mylsamy G(TRA-17202)., Krishnasamy P. WOS 1544-0479
195 Experimental research on waste and inedible feedstock as a partial alternate fuel: environmental protection and energy-saving initiative S G., Munuswamy D., Subbiah G., Devarajan Y., Mishra R., Thangaraja J. WOS 2190-6815
196 Performance enhancement of selective layer coated on solar absorber panel with reflector for water heater by response surface method: A case study Ramesh C., Vijayakumar M., Alshahrani S., Navaneethakrishnan G., Palanisamy R., Natrayan L., Saleel C.A., Afzal A., Shaik S., Panchal H. SCOPUS 2214-157X
197 Dielectric properties of conventional and microwave sintered Lanthanum doped CaCu3Ti4O12 ceramics for high- frequency applications Gecil Evangeline T(TRA-17829)., Raja Annamalai A. SCOPUS 0272-8842
198 Dynamic characterization of tapered composite sandwich plate with honeycomb core: Numerical and experimental investigations Elangovan H(TRA-16068)., Rajamohan V. SCOPUS 0263-8231
199 Future refrigerants with low global warming potential for residential air conditioning system: a thermodynamic analysis and MCDM tool optimization Prabakaran R., Sivalingam V., Kim S.C., Ganesh Kumar P., Praveen Kumar G. WOS 1614-7499
200 Effect of multiple laser peening on microstructural, fatigue and fretting-wear behaviour of austenitic stainless steel Praveenkumar K(19PHD0419)., Swaroop S., Manivasagam G. SCOPUS 0257-8972
201 Investigation of free and forced vibration of GFRP corrugated bio-inspired sandwich beam with HSDT: Numerical and experimental study Gunasegeran M (TRA-16766)., Edwin Sudhagar P. WOS 1537-6494
202 Stability of a laminar pipe flow subjected to a step-like increase in the flow rate Kannaiyan A., Natarajan S., Vinoth B.R. WOS 1070-6631
203 Optimal Response Prediction of Composite Honeycomb Sandwich Plate: Theoretical and Experimental Verification Rajamohan V., Sudhagar P.E., Praveen A.P., Topal U., Panda S.K., Vo-Duy T. WOS 1758-8251
204 Developments in Nanoparticles Enhanced Biofuels and Solar Energy in Malaysian Perspective: A Review of State of the Art Fayaz H., Khan S.A., Saleel C.A., Shaik S., Yusuf A.A., Veza I., Fattah I.M.R., Rawi N.F.M., Asyraf M.R.M., Alarifi I.M. WOS 1687-4110
205 Importance of WCFC particle on the mechanical and tribological performance of flax/hemp epoxy composite Singh C Q.J., Rajamurugan G. WOS 0272-6351
206 Prediction of flow mode transition in pneumatic conveying of fine particles using CFD JS S., Behera N. WOS 0272-6351
207 A study on microstructure and recrystallization kinetics on low deformed pure ETP copper Harshavardhana N., Sundar Singh Sivam S.P., Kumar G., Saxena A.K. WOS 1464-4207
208 A Cost Effective Approach to Explore the Electrical Discharge Machined Surface Characteristics of Nimonic C263 Superalloy Shastri R.K., Mohanty C.P. WOS 1059-9495
209 Optimization of Fused Deposition Modeling Process Parameters and Dynamic Mechanical Analysis of 3D Printed Polycarbonate/Acrylonitrile- Butadiene-Styrene Composite Loaded with Tetrabromobiphenol-A and Microcrystalline Cellulose Kumar M.N.V.R.L., Ramakrishnan R. WOS 1059-9495
210 Achieving an Optimal Balance of Strength and Elongation in AA 1050 Aluminum Alloy via Equal Channel Angular Pressing, Intermediate Annealing, and Post-Rolling Ahmadian P., Akbarzadeh A., Asadi P., Saxena A.K. WOS 1059-9495
211 Prediction of abrasive wears behavior of dental composites using an artificial neural network Suryawanshi A.S(TRA-17PHD0269)., Behera N. WOS 1025-5842
212 Application of machine learning approaches to predict joint strength of friction stir welded aluminium alloy 7475 and PPS polymer hybrid joint Sandeep R(TRA-16778)., Natarajan A. WOS 0954-4062
213 Review on latest trends in friction-based additive manufacturing techniques Venkit H(TRA-17844)., Selvaraj S.K. WOS 0954-4062
214 Review on Li-Ion Battery with Battery Management System in Electrical Vehicle Ramkumar M.S., Reddy C.S.R., Ramakrishnan A., Raja K., Pushpa S., Jose S., Jayakumar M. WOS 1687-8434
215 Optimizing wear analysis of plasma sprayed Linz-Donawitz slag-Al2O3 coatings using experimental design and neural network Pati P.R., Satapathy A., Gupta G., Ray S. WOS 1350-6501
216 Metal additive manufacturing of commercial aerospace components A comprehensive review Kumar G.R., Sathishkumar M., Vignesh M., Manikandan M., Rajyalakshmi G., Ramanujam R., Arivazhagan N. WOS 0954-4089
217 Melting and Solidification Behaviour of Some Organic Phase Change Materials Applicable to Low Temperature Heat Storage Applications Uma Maheswararao G., Jaya Krishna D., John B. WOS 0195-928X
218 Experimental and numerical study on heatwave effect over an airfoil for unmanned aerial vehicle applications Somashekar V (16PHD0601)., Immanuel Selwynraj A. WOS 0002-2667
219 Experimental investigation of turning process parameter under several cutting conditions for duplex steels for minimization of cutting temperature Arun K.K., Navaneeth V.R., Prabhu S., Ramesh kumar M., Giriraj M. SCOPUS 2214-7855
220 Design and analysis of brake system for FSAE race car Gupta E., Bora D.K.S., Rammohan A. SCOPUS 2631-8695
221 Exfoliation corrosion susceptibility on friction stir welded aluminium 6061/Cr2O3composite Uday K.N(TRA-16643)., Senthilraj K(TRA-17203)., Rajamurugan G. SCOPUS 2631-8695
222 Investigation of the Performance of a 660-MW Supercritical Boiler in Terms of NOx Emission and Enhancing the Thermal Efficiency by Optimizing the Air Distribution System Gavirineni N.K(14PHD0278)., Gundabattini E. WOS 2250-0545
223 MILLING PARAMETERS ON AA-6082-T6 ALLOY USING GREY RELATIONAL ANALYSIS, REGRESSION, ANN, AND GA MODELS Tamiloli N., Venkatesan J., Kumar T.S., Ashwin A.J., Kalitchin Z. SCOPUS 1310-4772
224 Complex Assembly Analysis for Geometric and Dimensional Tolerance to Obtain Selective Assembly from Partitioned Bins Using a Multi-objective Approach to Control Clearance Variation of IC Engine Chaitanya S.V., Dhande D.Y., Jeevanantham A.K. WOS 2250-0545
225 Model-based design optimisation of digital hydraulic pitch actuator for a large-scale wind turbine Lakshmi Narayanan V., Ramakrishnan R. WOS 0143-0750
226 Investigation of chatter prediction in end milling using morphological studies on aluminum alloy (Al6061) Shaik J.H., Mutra R.R., Galal A.M., Tanneeru S.R. WOS 0957-4565
227 Investigation on the density of Al2O3/R1234yf, TiO2/R1234yf and CuO/R1234yf nano-refrigerants BS B (TRA-16779)., Gundabattini E. WOS 2397-7914
228 Impact of Physicochemical Parameters on Effective Extraction of Bioactive Compounds from Natural Sources: An Overview Selvaraj K., Theivendren P., Pavadai P., Sureshbabu R.K.P., Ravishankar V., Palanisamy P., Gopal M., Dharmalingam S.R., Sankaranarayanan M. WOS 1573-4072
229 A Survey of Machine Learning in Friction Stir Welding, including Unresolved Issues and Future Research Directions Chadha U(18BME0748)., Selvaraj S.K., Gunreddy N., Sanjay Babu S., Mishra S., Padala D., Shashank M., Mathew R.M., Kishore S.R., Panigrahi S., Nagalakshmi R., Kumar R.L., Adefris A. WOS 2577-6576
230 Solvent-free green synthesis of nonflammable and self-healing polymer film electrolytes for lithium metal batteries Guo C., Cao Y., Li J., Li H., Kumar Arumugam S., Oleksandr S., Chen F. WOS 0306-2619
231 Second-generation bioethanol production from corncob A comprehensive review on pretreatment and bioconversion strategies, including techno-economic and lifecycle perspective Gandam P.K., Chinta M.L., Pabbathi N.P.P., Baadhe R.R., Sharma M., Thakur V.K., Sharma G.D., Ranjitha J., Gupta V.K. WOS 0926-6690
232 Insights on Spark Plasma Sintering of Magnesium Composites: A Review Somasundaram M., Uttamchand N.K., Annamalai A.R., Jen C.-P. WOS 2079-4991
233 A study on retention of MWCNT in robocasted MWCNT-HAP scaffold structures using vacuum sintering technique and their characteristics Ravoor J., S R.E. WOS 0272-8842
234 Accumulation of biomedical waste during the COVID-19 pandemic: concerns and strategies for effective treatment Kuppusamy P.P., Bhatia A., Verma A., Shah N.R., Pratyush P., Shanmugarajan V., Kim S.C., Poongavanam G.K., Duraisamy S. WOS 0944-1344
235 Chitosan: A Sustainable Material for Multifarious Applications Hameed A.Z., Raj S.A., Kandasamy J., Baghdadi M.A., Shahzad M.A. WOS 2073-4360
236 Mechanical Properties of PALF/Kevlar- Reinforced Unsaturated Polyester Hybrid Composite Laminates Bakhori S.N.M., Hassan M.Z., Bakhori N.M., Rashedi A., Mohammad R., Md Daud M.Y., Aziz S.A., Ramlie F., Kumar A., Naveen J. WOS 2073-4360
237 A multi-criteria decision making approach to evaluating the performance of Indian railway zones Jose E., Agarwal P., Zhuang J., Swaminathan J. WOS 0254-5330
238 Critical review on optimal regenerative braking control system architecture, calibration parameters and development challenges for EVs Saiteja P., Ashok B., Wagh A.S., Farrag M.E. WOS 0363-907X
239 Nanoscale interfacial engineering of 1D g- C3 N4 enables effective and thermally stable HTL-free carbon-based perovskite solar cells with aging for 100 hours Eswaramoorthy N., Arulraj A., Mangalaraja R.V., Pitchaiya S., Rajaram K. WOS 0363-907X
240 Current Developments in the Effective Removal of Environmental Pollutants through Photocatalytic Degradation Using Nanomaterials Sivaraman C., Vijayalakshmi S., Leonard E., Sagadevan S., Jambulingam R. WOS 2073-4344
241 Effect of Low Concentration of SiO2 Nanoparticles on Grape Seed Essential Oil/PBAT Composite Films for Sustainable Food Packaging Application Arumugam S., Kandasamy J., Thiyaku T., Saxena P. WOS 2071-1050
242 Social Marketing Plan to Decrease the COVID-19 Vaccine Hesitancy among Senior Citizens in Rural India Shekhar S.K. WOS 2071-1050
243 Current Trends and Future Perspectives of Nanomaterials in Food Packaging Application Chadha U., Bhardwaj P., Selvaraj S.K., Arasu K., Praveena S., Pavan A., Khanna M., Singh P., Singh S., Chakravorty A., Badoni B., Banavoth M., Sonar P., Paramasivam V. WOS 1687-4129
244 An Experimental Study of ZrO2- CeO2Hybrid Nanofluid and Response Surface Methodology for the Prediction of Heat Transfer Performance: The New Correlations Vidhya R., Balakrishnan T., Kumar B.S., Palanisamy R., Panchal H., Angulo-Cabanillas L., Shaik S., Saleh B., Alarifi I.M. WOS 1687-4129
245 A Review on the Effect of Fabric Reinforcement on Strength Enhancement of Natural Fiber Composites Arumugam S., Kandasamy J., Venkatesan S., Murugan R., Narayanan V.L., Sultan M.T.H., Shahar F.S., Shah A.U.M., Khan T., Sebaey T.A. WOS 1996-1944
246 Attainment of favorable microstructure for residual stress reduction through high-temperature heat treatment on additive manufactured inconel 718 alloy Kumar V.P., Jebaraj A.V. WOS 0268-3768
247 An experimental and numerical study to enhance the thermal characteristics of LA/CuO/Al2O3 nanocomposites as a phase change material for building cooling applications Thangapandian E., Palanisamy P. WOS 1548-0569
248 Physical, mechanical, and sliding wear behavior of epoxy composites filled with surface modified walnut shell particulate Shejkar S.K., Agrawal B., Agrawal A., Gupta G. WOS 1548-0569
249 Variable stiffness composite laminated beams - nonlinear free flexural vibration behavior using a sinusoidal based shear flexible structural theory accounting for Poisson's effect Barathan V., Rajamohan V., Haboussi M., Manickam G. WOS 0020-7462
250 The influence of exhaust gas recirculation on the characteristics of compression ignition engines powered by tamanu methyl ester Senthilkumar P.B., Parthasarathy M., Afzal A., Saleel C.A., Cuce E., Saboor S., Gera T. WOS 1748-1325
251 Effect of Silicon Segregation in the Argon Arc Welded Incoloy 20 Superalloy Natesh M., Selvaraj S.K., Arivazhagan N., Manikandan M., Tofil S., Radek N., Mistry Y., Sm M. WOS 1876-9918
252 An enhancement in diesel engine performance, combustion, and emission attributes fueled with Eichhornia crassipes oil and copper oxide nanoparticles at different injection pressures Khan O., Khan M.Z., Khan E., Bhatt B.K., Afzal A., Abulut Ü., Shaik S. WOS 1556-7036
253 Part Tailoring in Metal-Additive Manufacturing: A Step towards Functionally Graded Customized Stainless-Steel Components Using Laser Powder Bed Fusion Elkaseer A., Charles A., Schneider S., Scholz S.G. WOS 2076-3417
254 Fluidized dense phase pneumatic conveying: a review Behera N., Alkassar Y., K. Agarwal V., Pandey R.K. WOS 1548-0046
255 Thermal Performance Study of Solar Air Dryers for Cashew Kernel: A Comparative Analysis and Modelling Using Response Surface Methodology (RSM) and Artificial Neural Network (ANN) Huddar V.B., Razak A., Cuce E., Gadwal S., Alwetaishi M., Afzal A., Saleel C.A., Shaik S. WOS 1687-529X
256 Water Absorption Behavior of Teff (Eragrostis tef) Straw Fiber-Reinforced Epoxy Composite: RSM-Based Statistical Modeling and Kinetic Analysis Prabhu S.V., Wilson V.H., Anand K.T., Jose S., Sivamani S., Gomadurai C., Kifetew M. WOS 0730-6679
257 Engineering properties of Teflon derived blends and composites: a review Shindalkar S.S., Humbe S.S., Joshi G.M., Kumar C.R. WOS 2574-089X
258 Effect of Fused Filament Fabrication Parameters and Tetrabromobisphenol- A/Microcrystalline Cellulose Additives on the Dynamic Mechanical Behavior of Polycarbonate/AcrylonitrileButadiene Styrene Blends for Precision Structures Kumar M., Ramakrishnan R. WOS 1059-9495
259 Investigation on Mechanical Properties of Additive Manufactured Hybrid Auxetic Structure Bagewadi S.S., Sugavaneswaran M., Bhagchandani R.K. WOS 1059-9495
260 AI-driven techniques for controlling the metal melting production: A review, processes, enabling technologies, solutions, and research challenges Chadha U., Selvaraj S.K., Raj A., Mahanth T., Praveen Vignesh S.T., Lakshmi P.J., Samhitha K., Reddy N.B., Adefris A. WOS 2053-1591
261 Experimental analysis of latent heat thermal energy storage system using encapsulated multiple phase-change materials Singh S.K., Verma S.K., Kumar R., Sharma A., Singh R., Tiwari N. WOS 2041-3009
262 Effect of n-butanol on cotton seed oil biodiesel: an approach for improving the emission behavior of DI diesel engine Asokan M.A., Prabu S.S. WOS 1091-6466
263 A Decision-Making Model for Selection of the Suitable FDM Machine Using Fuzzy TOPSIS Raja S., Rajan A.J. WOS 1024-123X
264 3D printing for ceramic based PLA composites: Development, security, potential and challenges Moulika G., Ponnusamy P. WOS 1229-9162
265 Microstructural analysis and optimization of welding parameters for AA1100 welded plates Thirumalai R., Karthick S., Giriraj M. WOS 1229-9162
266 Optimization of stir casting process parameter using response surface methodology Senthilkumar K.M., Sivakumar A., Shivaji R.M., Tamang S.K., Giriraj M. WOS 1229-9162
267 Dynamics of a Non-Ideal Gyroscopic Rotor System with Translational- Rotational Coupling Effect of External and Internal Damping Sundar Dasgupta S. WOS 1934-7936
268 A brief review on the Tube-to-Tube plate welding process Srivastava D., Chadha U., Gunreddy N., Saini N.K., Matara N.N., Machindar O., Mishra U.V., Khanna M., Ram Kishore S., Selvaraj S.K. SCOPUS 2214-7853
269 A comparative study on the thermal and dynamic analysis of a disc brake using Ansys Kalipada Sau S., George Pulinat K., Noel Moss P., Ranjeet P., Senthur Prabu S. SCOPUS 2214-7853
270 A Study on the Online-Offline and Blended Learning Methods Sharma D., Sood A.K., Darius P.S.H., Gundabattini E., Darius Gnanaraj S., Joseph Jeyapaul A. SCOPUS 2250-2106
271 Deep learning and machine learning neural network approaches for multi class leather texture defect classification and segmentation Moganam P.K., Sathia Seelan D.A. SCOPUS 2524-7859
272 Hybrid fuzzy AHP-TOPSIS framework on human error factor analysis: Implications to developing optimal maintenance management system in the SMEs Velmurugan K., Saravanasankar S., Venkumar P., Sudhakarapandian R., Bona G.D. SCOPUS 2666-1888
273 Impact response of a partially filled fuel tank subjected to high-velocity projectiles Purbey A., Selvaraj R., Ramamoorthy M. SCOPUS 1448-4846
274 Integrated Design for Assembly Approach for Optimal Reduced Levels of Assembly Sequence Generation using Enhanced Fruit Fly Algorithm Murali G.B., Deepak B.B.V.L., Bahubalendruni M.V.A.R. SCOPUS 0973-1318
275 Investigation on thermal analysis of disc brake using Autodesk Fusion 360 Mugilan M., Devendra K.S., Danish M., Senthur Prabu S. SCOPUS 2214-7853
276 Mechanical and thermomechanical characterization of Ni50-x Ti50Cux(x = 2, 5, 10at%) with morphological studies Rajeshkannan R., Muralidharan B., Pandi Rajasabai S., Naveenkumar R. SCOPUS 2214-7853
277 Numerical Investigation on the Effect of Geometric Shape and Outlet Angle of a Bladeless Fan for Flow Optimization using CFD Techniques Ravi D., Rajagopal T.K.R. SCOPUS 2666-2027
278 Structural analysis and simulation of solid microneedle array for vaccine delivery applications S.B.V.J. C., Mannayee G. SCOPUS 2214-7853
279 Transition to Electric Mobility in India: Barriers Exploration and Pathways to Powertrain Shift through MCDM Approach Ashok B., Kannan C., Usman K.M., Vignesh R., Deepak C., Ramesh R., Narendhra T.M.V., Kavitha C. SCOPUS 2250-0545
280 Tribology analysis and the effect of molybdenum disulphide lubricant additive on the performance of VCR system Raghavulu K.V., Rasu N.G., Jani S.P. SCOPUS 2374068X
281 Hot corrosion and air oxidation behavior of pulsed current gas tungsten arc welded and CO2 laser beam welded SMO 254 at 800 °C P R., M A. SCOPUS 0950-7116
282 An overview on microalgae as renewable resources for meeting sustainable development goals Oliveira C.Y.B., Jacob A., Nader C., Oliveira C.D.L., Matos Â.P., Araújo E.S., Shabnam N., Ashok B., Gálvez A.O. WOS 0301-4797
283 Space-age energy saving, carbon emission mitigation and color rendering perspective of architectural antique stained glass windows Shaik S., Maduru V.R., Kirankumar G., Arc M., Ghosh A., Kontoleon K.J., Afzal A. WOS 1873-6785
284 Hybrid optimization and modelling of CI engine performance and emission characteristics of novel hybrid biodiesel blends Viswanathan V.K., Kaladgi A.R., Thomai P., Abulut Ü., Alwetaishi M., Said Z., Shaik S., Afzal A. WOS 0960-1481
285 Formulation of optimal bioenergy mixtures from phototrophic and heterotrophic cultures of S. quadricauda and C. pyrenoidosa microalgal strains Jacob A., Ashok B., Shanthakumar S., Jino L., Karthikeyan A., Kavvampally R., Raja I. WOS 0960-1481
286 Augmented v-corrugated absorber plate using shot-blasting for solar air heater Energy, Exergy, Economic, and Environmental (4E) analysis Ganesh Kumar P., Vigneswaran V.S., Balaji K., Vinothkumar S., Prabakaran R., Sakthivadivel D., Meikandan M., Kim S.C. WOS 1744-3598
287 Nanocellulose-based membranes for CO2 separation from biogas through the facilitated transport mechanism: a review Nithin Mithra S., Ahankari S.S. WOS 2589-2347
288 Contemporary review on carbon nanotube (CNT) composites and their impact on multifarious applications Choudhary M., Sharma A., Raj S.A., Sultan M.T.H., Hui D., Md Shah A.U. WOS 2191-9097
289 Functionally graded carbon nanotubes reinforced composite structures: An extensive review Soni S.K., Thomas B., Swain A., Roy T. WOS 0263-8223
290 Effect of Nb-free consumables on the microstructure and structural integrity of pressure vessel grades of dissimilar austenitic stainless steel welded joints Chandrasekar V., Ramkumar K.D. WOS 2238-7854
291 Influence of cooling conditions on tensile lap shear strength and microstructure of friction stir welded aluminum alloy 5052- H32 and polycarbonate light weight hybrid joint Nagarajan B.M., Manoharan M. WOS 1526-6125
292 Computational AI models in VAT photopolymerization: a review, current trends, open issues, and future opportunities Sachdeva I., Ramesh S., Chadha U., Punugoti H., Selvaraj S.K. WOS 1433-3058
293 Effect of Moringa oleifera biodiesel dieselcarbon black water emulsion blends in diesel engine characteristics Ramalingam S., Dharmalingam B., Deepakkumar R., Sriariyanun M. WOS 2352-4847
294 Selective laser melting and post- processing stages for enhancing the material behavior of cobalt-chromium alloy in total hip replacement: a review C U.N., P S.P.A. WOS 1042-6914
295 Machine learning prediction and study of hotspots and hotspots location for sustainable battery energy system Afzal A., Alahmadi A.A., Abdul Razak R.K., Alwetaishi M., Alzaed A.N., Shaik S. WOS 0363-907X
296 Higher-order finite element solution of graphene platelets reinforced nanocomposite curved panels with uniform/non-uniform porosity Joshi K.K., Kar V.R., Thomas B. WOS 1539-7734
297 Fracture toughness and fatigue crack growth rate studies on rotary friction weldments of nickel-based superalloys Saju T., Velu M. WOS 0167-577X
298 Development of a low heat-input welding technique for joining thick plates of 250 grade maraging steel to fabricate rocket motor casings Jose B., Manoharan M., Natarajan A., Rao Muktinutalapati N., Madhusudhan Reddy G. WOS 0167-577X
299 Machine learning approach for predicting the peak temperature of dissimilar AA7050-AA2014A friction stir welding butt joint using various regression models Anandan B., Manikandan M. WOS 0167-577X
300 A review on metal additive manufacturing for intricately shaped aerospace components Madhavadas V., Srivastava D., Chadha U., Aravind Raj S., Sultan M.T.H., Shahar F.S., Shah A.U.M. WOS 1755-5817
301 Thermal buckling analysis of tapered laminated composite beam: Numerical and experimental investigation Arumugam A.B., Rajendra C.O., Edwin Sudhagar P., Rajamohan V., Kumbhar S.G., Perumal A. WOS 1548-0569
302 A Review on Geothermal Renewable Energy Systems for Eco-Friendly Air- Conditioning Greco A., Gundabattini E., Solomon D.G., Singh Rassiah R., Masselli C. WOS 1996-1073
303 Modeling and Simulation of Electric Motors Using Lightweight Materials Boopathi N.G., Muthuraman M.S., Palka R., Wardach M., Prajzendanc P., Gundabattini E., Rassiah R.S., Solomon D.G. WOS 1996-1073
304 Towards Safer and Smarter Design for Lithium-Ion-Battery-Powered Electric Vehicles: A Comprehensive Review on Control Strategy Architecture of Battery Management System Ashok B., Kannan C., Mason B., Ashok S.D., Indragandhi V., Patel D., Wagh A.S., Jain A., Kavitha C. WOS 1996-1073
305 How Asian slum emissions impact local microclimates in polluted air masses Ghosh S., Sathish Kumar C.R., Gumber S., Dobbie S., Yang H. WOS 1530-261X
306 Experimental investigation on load mitigation of a 5 MW wind turbine in digital fluid power pitch system test rig based on predictive load mitigation controller Narayanan V.L., Mathew A.T. WOS 1556-7230
307 Effect of particle loading and temperature on the rheological behavior of Al2O3 and TiO2 nanofluids Das P.K., Dash S.K., Ganguly R., Santra A.K., Venkatesan E.P., Rajhi A.A., Shaik S., Afzal A. WOS 1556-7230
308 A Fuzzy CRITIC and Fuzzy WASPAS-Based Integrated Approach for Wire Arc Additive Manufacturing (WAAM) Technique Selection Trivedi P., Vansjalia R., Erra S., Narayanan S., Nagaraju D. WOS 2191-4281
309 Heat Transfer in Multiport Minichannel Condensers and Evaporators: Correlation Development and Meta-Analysis Mukkamala Y., Dirker J. WOS 1521-0537
310 Residual Stress Distribution in Selective Laser Melting of SS316L Parts Vemanaboina H., Ferro P., Babu B.S., Gundabattini E., Kumar K., Berto F. WOS 1687-8434
311 Performance of Polyvinyl Alcohol and Polypropylene Fibers under Simulated Cementitious Composites Pore Solution Krishnaraja A.R., Kulanthaivel P., Ramshankar P., Wilson V.H., Palanisamy P., Vivek S., Sampathkumar V., Ganeshan P., Sashikkumar M.C., Raja K., Selvaraj S.K., John Rajan A., Jose S. WOS 1687-8434
312 Microstructural and Mechanical Characterization of Welded Joints between Stainless Steel and Hastelloy Made Using Pulsed Current Gas Tungsten Arc Welding Bezawada S., Gajjela R. WOS 1059-9495
313 Improvements in Hot Corrosion Behavior of CO2 Laser-Welded Fe-Based A-286 Alloy in an Aggressive Salt Environment by High-Velocity Oxy-Fuel Coating Muthu S.M., Arivarasu M. WOS 1059-9495
314 Study on Fresh and Mechanical Properties of Polyblend Self-Compacting Concrete with Metakaolin, Lightweight Expanded Clay Aggregate, and SAP as Alternative Resources Vivek S.S., Karthikeyan B., Kanna G.R., Selvaraj S.K., Jose S., Palanisamy P., Adane T.M. WOS 1687-8086
315 Development of protective coating for X8CrNiMoVNb16-13 alloy in high- temperature molten salt environment through high-velocity oxy-fuel sprayed NiCrMoNb and Cr3C2-25NiCr powder coating Sreenivasulu V., Subramani P., Jayakumar V., Mageshkumar K., Arivazhagan N., Manikandan M., Tofil S., Sathishkumar M. WOS 2041-3009
316 Numerical modelling of dry-out in pulsating heat pipe using VOF model Palani K.C., Rajagopal D. WOS 1738-494X
317 Duplex aging of metastable beta titanium alloys: A Review Kirthika A.M.A., Rao M.N., Manivasagam G. WOS 0975-1645
318 Role of Volumetric Energy Density and Post-Heat Treatments to Achieve Stable Microstructure on Additive Manufactured Ti6Al4V Alloy Praveen Kumar D., Vinoth Jebaraj A. WOS 0975-1645
319 DRILLING PARAMETRIC ANALYSIS OF PERFORATED COPPER FOIL ON HEMP/SISAL FIBER COMPOSITE USING SEQUENTIAL ANN Krishnasamy P., Geetha M., Rajamurugan G., Muralidharan B., Krishnaiah R. WOS 0218625X
320 Thermal Performance Enhancement of CuO-Paraffin Nano-Enhanced Phase Change Material Singh S., Verma S., Kumar R., Gupta G., Pati P.R., Sharma A. SCOPUS 0975-3060
321 Kindergarten Geography Classrooms: The Way Forward Amid COVID-19 Shekhar S.K. SCOPUS 1752-6884
322 Thermal and magnetic properties study of NiCo2O4/graphene and NiFe2O4/graphene George M., Pratheesh K., Mohanty A., Suresh N., Varghese T., Sunny R., Narayanan S. SCOPUS 2214-7853
323 Prediction of split injection strategy assisted diesel engine combustion, performance and emission characteristics fuelled waste frying oil methyl ester through central composite design Dharmalingam B., Deepakkumar R., Bhattacharya K., Paulraj Gundupalli M., Sriariyanun M. SCOPUS 2214-7853
324 Deep Ensemble Model for Spam Classification in Twitter via Sentiment Extraction: Bio-Inspiration-Based Classification Model Ainapure B.S., Boopathi M., Kolli C.S., Jackulin C. SCOPUS 0219-4678
325 Numerical investigation of suction and blowing effects on fluid flow and heat transfer characteristics of solar air heater Nishidh N.B., Deepakkumar R. SCOPUS 2214-7853
326 Strategic design of PCM integrated burnt clay bricks: Potential for cost-cutting measures for air conditioning and carbon dioxide extenuation Shaik S., Arumugam C., Shaik S.V., Arc M., Afzal A., Ma Z. WOS 0959-6526
327 Nanocellulose-based aerogel electrodes for supercapacitors: A review Nargatti K.I., Subhedar A.R., Ahankari S.S., Grace A.N., Dufresne A. WOS 0144-8617
328 Experimental and parametric studies on the effect of waste cooking oil methyl ester with diesel fuel in compression ignition engine Rajak U., Subhaschandra Singh T., Nath Verma T., Kumar Chaurasiya P., Shaik S., Afzal A., Cuce E., Rajhi A.A., Ahamed Saleel C. WOS 2213-1388
329 Effect of using hybrid nanofluids as a coolant on the thermal performance of portable thermoelectric refrigerators Mert Cuce P., Cuce E., Guclu T., Shaik S., Alshahrani S., Ahamed Saleel C. WOS 2213-1388
330 Nonlinear flutter of 2D variable stiffness curvilinear fibers composite laminates by a higher-order shear flexible beam theory with Poisson's effect Manickam G., Rajamohan V., Gunasekaran V., Pitchaimani J., Mohamed H. WOS 0263-8223
331 Influence of heat treatment on the tool life while machining SLM Inconel 718 with reference to C&W Inconel 718 Natarajan S.P., Vaudreuil S., Chibane H., Morandeau A., Xavior M.A., Cormier J., Leroy R., Duchosal A. WOS 1526-6125
332 Inedible oil feedstocks for biodiesel production: A review of production technologies and physicochemical properties Devarajan Y., Munuswamy D.B., Subbiah G., Vellaiyan S., Nagappan B., Varuvel E.G., Thangaraja J. WOS 2352-5541
333 Performance evaluation of using evacuated tubes solar collector, perforated fins, and pebbles in a solar still experimental study and CO2 mitigation analysis Panchal H., Sohani A., Van Nguyen N., Shoeibi S., Khiadani M., Huy P.Q., Hoseinzadeh S., Kabeel A.E., Shaik S., Cuce E. WOS 1614-7499
334 3D Printing Parameter Optimization Using Taguchi Approach to Examine Acrylonitrile Styrene Acrylate (ASA) Mechanical Properties Hameed A.Z., Aravind Raj S., Kandasamy J., Shahzad M.A., Baghdadi M.A. WOS 2073-4360
335 Selection of Natural Fibre for Pultruded Hybrid Synthetic/Natural Fibre Reinforced Polymer Composites Using Analytical Hierarchy Process for Structural Applications Balakrishnan T.S., Sultan M.T.H., Naveen J., Shahar F.S., Najeeb M.I., Shah A.U.M., Khan T., Sebaey T.A. WOS 2073-4360
336 Thermal degradation, visco-elastic and fire- retardant behavior of hybrid Cyrtostachys Renda/kenaf fiber-reinforced MWCNT- modified phenolic composites Loganathan T.M., Sultan M.T.H., Ahsan Q., Jawaid M., Naveen J., Shah A.U.M., Talib A.R.A., Basri A.A. WOS 1388-6150
337 Validation of Computational Fluid Dynamics Approach of Lateral Velocity Profile Due to Curvature Effect on Floodplain Levee of Two- stage Meandering Channel Rathor S.K., Mohanta A., Patra K.C. WOS 0920-4741
338 Performance Evaluation of Solar Chimney Power Plants with Bayburt Stone and Basalt on the Ground as Natural Energy Storage Material pollutants Cuce P.M., Cuce E., Alshahrani S., Saboor S., Sen H., Veza I., Saleel C.A. WOS 2071-1050
339 Characterization Studies on Graphene- Aluminium Nano Composites for Aerospace Launch Vehicle External Fuel Tank Structural Application Jayaseelan J., Pazhani A., Michael A.X., Paulchamy J., Batako A., Hosamane Guruswamy P.K. WOS 1996-1944
340 Influence of tool rotational and transverse speed on friction stir welding of dissimilar aluminum 6061 composites Uday K.N., Rajamurugan G. Dhaou I.B. WOS 0167-577X
341 Nonlinear buckling analysis of a sandwich composite semi-ellipsoidal shell under hydrostatic pressure: A numerical and experimental investigation Barathan V., Rajamohan V. WOS 1537-6532
342 Analysis of barriers affecting the adoption of community solar from consumer's perspective: A hybrid ISM-DEMATEL approach Thakur P., Wilson V.H. WOS 0958-305X
343 Experimental and numerical damage analysis of low-velocity drop weight impact of polyethylene self-reinforced composite laminates for transportation applications a Vertical Plate with Radiation Chandran Maniyamparambil S., Vadivel G.K., Krishnan P. WOS 1530-7980
344 Experimental investigation on energy saving potential for thermally activated buildings integrated with the active cooling system Chandrashekar R., Kumar B. WOS 1556-7230
345 Influence of Fatty Acid Composition on the Tribological Performance of Methyl Esters Under Boundary Lubrication Regime Rajasozhaperumal G., Kannan C. WOS 2191-4281
346 Microstructural and Mechanical Properties of a Heat-Treated EV31A Magnesium Alloy Fabricated Using the Stir-Casting Process Somasundaram M., NarendraKumar U. WOS 2073-4352
347 A review on application of biomaterials for medical and dental implants Abraham A.M., Venkatesan S. WOS 2041-3076
348 Experimental Analysis and Mechanical Properties of Fly-ash Loaded E-Glass Fiber Reinforced IPN (Vinylester/polyurethane) Composite Ganesamoorthy R., Suresh G., Padmavathi K.R., Rajaparthiban J., Vezhavendhan R., Bharathiraja G. WOS 1229-9197
349 Comparative Analysis between 5thand 6thGeneration Superalloys and Previous Generation Superalloys Jithin S D., Selvaraj S.K., Vijay Vishaal K.E., Sundaramali G. WOS 1687-8442
350 Microstructural and mechanical characterization of pre-used SA 335 P91 super-heater pipe weldment used in 70 MW CFBC boilers Prabu S.S., Sujai S., Prathiba S., Ramkumar K.D., Arivazhagan N. WOS 0954-4089
351 Selection of Additive Manufacturing Machine Using Analytical Hierarchy Process Raja S., John Rajan A., Praveen Kumar V., Rajeswari N., Girija M., Modak S., Vinoth Kumar R., Mammo W.D. WOS 1875-919X
352 COIN: Correlation Index-Based Similarity Measure for Clustering Categorical Data Sowmiya N., Gupta N.S., Natarajan E., Valarmathi B., Elamvazuthi I., Parasuraman S., Kit C.A., Freitas L.I., Abraham Gnanamuthu E.M. WOS 1024-123X
353 Coated Natural Fiber Reinforced Hybrid Composite: Mechanical, Thermal, and Acoustic Performances Thangamani J., Krishnasamy P. WOS 0972-2815
354 Enhancing Ride Comfort and Stability of a Large Van Using an Improved Semi-active Stability Augmentation System Rajasekharan Unnithan A.R., Subramaniam S. SCOPUS 2380-2170
355 Rapid casting using alternative approach of pattern and mould making Bhagchandani R.K., Kamble P., Kapil S., Karunakaran K.P., Ravi B. SCOPUS 1750-0591
356 Semantic Approach for Evaluation of Energy Storage Technologies under Fuzzy Environment Nagaraju D., Chiranjeevi C., Rajasekhar Y., Selvaraj S.K., Chadha U., Nagalakshmi R., Paramasivam V. SCOPUS 1687-7101
357 Application of machine learning in corrosion inhibition study [PRIMENA MAINSKOG UENJA U PROUAVANJU INHIBICIJE KOROZIJE] Rajendran D., Sasilatha T., Rajendran S., Selvaraj S.K., Lacnjevac C., Prabha S.S., Rathish R.J. SCOPUS 2466-2585
358 An exploratory experimental study of a single-cylinder diesel engine run on diesel Mesua ferrea Linn oildiethyl ether ternary blends Dabi M., Sahoo B.B., Saha U.K. SCOPUS 0975-007X
359 Immediate need for next-generation and mutation-proof vaccine to protect against current emerging Omicron sublineages and future SARS-CoV-2 variants: An urgent call for researchers and vaccine companies Correspondence Chakraborty C., Bhattacharya M., Sharma A.R., Mohapatra R.K., Chakraborty S., Pal S., Dhama K. WOS 1743-9191
360 A critical review on the effects of pneumatic mixing in anaerobic digestion process Sasidhar K.B., Somasundaram M., Ekambaram P., Arumugam S.K., Nataraj G., Murugan M.A. WOS 0959-6526
361 Modeling and Analyzing the Inventory Level for Demand Uncertainty in the VUCA World: Evidence From Biomedical Manufacturer Raghuram P., S B., Manivannan R., Anand P.S.P., Sreedharan V.R. WOS 0018-9391
362 Strategy to reduce carbon emissions by adopting ammoniaAlgal biodiesel in RCCI engine and optimize the fuel concoction using RSM methodology Elumalai R., Ravi K. WOS 0360-3199
363 Modern Synthesis and Sintering Techniques of Calcium Copper Titanium Oxide (CaCu3Ti4O12) Ceramics and Its Current Trend in Prospective Applications: A Mini-Review Gecil Evangeline T., Annamalai A.R., Magdaline T.B. WOS 2079-4991
364 Crystal mud transparent slime as a glazing material for net-zero energy buildings: Enhanced energy savings, diurnal lighting, and CO2 mitigation Priya A.V., Shaik S. WOS 0973-0826
365 Fabrication of near superhydrophobic Pt TiO2 hybrid nanoflake composite as food sensor in food processing industry Karuppusamy I., Seenuvasaperumal P., Surendiran M., Shanmugam S., Chinnathambi A., Alahmadi T.A., Brindhadevi K., Lan Chi N.T., Pugazhendhi A. WOS 0278-6915
366 Machine learning-based CFD simulations: a review, models, open threats, and future tactics Panchigar D., Kar K., Shukla S., Mathew R.M., Chadha U., Selvaraj S.K. WOS 0941-0643
367 Effect of Fuel Preheating on Engine Characteristics of Waste Animal Fat-Oil Biodiesel in Compression Ignition Engine Srinivasan G.R., Jambulingam R., Gacem A., Ahmad A., Bhutto J.K., Yadav K.K., Mezni A., Alharbi O.K.R., Islam S., Ahn Y., Jeon B.-H. WOS 2073-4360
368 A review on Shock tubes with multitudinous applications Sakthi Balan G., Aravind Raj S. WOS 0734-743X
369 A novel cryogenic technology for low-cost carbon capture from NGCC power plants for climate change mitigation De D.K., Oduniyi I.A., Alex Sam A. WOS 2451-9049
370 Physical, mechanical, and biological characterization of robocasted carbon nanotube reinforced microwave sintered calcium phosphate scaffolds for bone tissue engineering Puthillam U., Ravoor J., Elsen Selvam R., Karuppan D., Bakthavachalam B., Aseer J.R. WOS 1751-6161
371 Medium heavy alloy fabrication with ultrafine grain and high performance via spark plasma sintering Srikanth M., Annamalai A.R., Muthuchamy A. WOS 0167-577X
372 Low-Velocity Impact, Free-Fall Drop Test of Prototype, and Failure Analysis of Hybrid Palm / Kenaf Reinforced MWCNT Phenolic Composites Loganathan T.M., Sultan M.T.H., Muhammad Amir S.M., Naveen J., Shari M.R., Mustapa S., Saharudin M.F., Mohd Rabu I.S.B., Shah A.U.M., Mohd S. WOS 1544-0478
373 Evaluation, optimization and prediction of the transverse shear modulus of biomimetic 3D printed sandwich core Gunasegeran M., Sudhagar P.E. WOS 1537-6494
374 Experimental investigation on digital offset switching strategy for precise dosing using digital multiple micropump infusion system Vante A.B., Kanish T.C. WOS 2411-5134
375 Effect of graphene on thermal, mechanical, and shape memory properties of polyurethane nanocomposite Thiyagu C., NarendraKumar U. WOS 0947-8396
376 Experimental study on abrasive water jet machining of WCFC reinforced flax/wire mesh/hemp composite Singh Q.J., Rajamurugan G. WOS 1528-0837
377 Electrochemical corrosion behaviour of stir cast and heat-treated EV31A magnesium alloy in different electrolytic mediums Somasundaram M., NarendraKumar U. WOS 0021-891X
378 Assessment on Performance and Emission Characteristics of the CRDI Engine Fueled with Ethanol/Diesel Blends in Addition to EGR Dineshkumar C., Jeyakumar P.D., Arvinda Pandian C.K., Rajmohan N., Elumalai P.V., Kamesh N., Shaik S., Sharifpur M., Khalilpoor N. WOS 1687-8078
379 Experimental studies of fracture and fatigue crack growth in dissimilar metal welded joints of nickel-based superalloys: Cracks oriented along the weld Saju T., Velu M. WOS 2041-3076
380 Artificial Intelligence-Based Deep Learning Model for the Performance Enhancement of Photovoltaic Panels in Solar Energy Systems Meena R.S., Singh A., Urhekar S., Rohitbhakar, Garg N.K., Israr M., Kothari D.P., Chiranjeevi C., Srinivasan P. WOS 1110-662X
381 Influence of CNT volume fractions on static and dynamic behavior of aluminum honeycomb-cored carbon-fiber- reinforced honeycomb sandwich structure Chandra S., Amulani A., Thomas S.B., Soni S.K., Thomas B. WOS 1678-5878
382 Directed Energy Deposition via Artificial Intelligence-Enabled Approaches Chadha U., Selvaraj S.K., Lamsal A.S., Maddini Y., Ravinuthala A.K., Choudhary B., Mishra A., Padala D., Shashank M., Lahoti V., Adefris A., Dhanalakshmi S. WOS 1076-2787
383 Influence of Carbon Nanotubes on Enhancement of Sliding Wear Resistance of Plasma-Sprayed Yttria-Stabilised Zirconia Coatings Kalangi C., Bolleddu V. WOS 1687-8442
384 Prognostics, Health Assessment, and Modelling of Material Removal Rate by EDM for Al 6061 and AISI 304 via Cockroach Swarm and Fruit Fly Optimization Approaches Selvaraj S.K., Kaliappan J., Muthuswamy N., Ramesh Kumar S., Cheepu M. WOS 1687-8442
385 High-Temperature Solid Particle Erosion Behavior of Laser Powder Bed Fused Inconel 718 Samuel S.C., Arivarasu M., Prabhu T.R. WOS 1528-8897
386 A Novel Technique to Utilize Second Waste of Plastic Bottle as Soil Reinforcement: A Comparative Study on Mechanical Properties with Natural Black Cotton Soil Adane T.M., Araya A.A., Karthikeyan B., Selvaraj S.K., Jose S., John Rajan A., Vincent Herald Wilson D. WOS 1687-8094
387 Sustainable Concrete Columns with GGBS and Industrial Sand: A Comparative Study on Destructive and Nondestructive Tests on Damaged Columns Strengthened with GFRP Jacketing Gunarani G.I., Karthikeyan B., Priyadharshini A., Selvaraj S.K., Jose S., Vincent Herald Wilson D., Moges Adane T. WOS 1687-8094
388 Characterization of weld joints produced by continuous wave and double pulse gas metal arc welding in naval grade high- strength low-alloy steel Venkateshkannan M., Arivazhagan N., Nageswara Rao M., Madhusudhan Reddy G. WOS 2041-3009
389 Latest research and developments of ceramic reinforced magnesium matrix compositesA comprehensive review Bharathi P., Sampath kumar T. WOS 2041-3009
390 Availability Analysis of the Critical Production System in SMEs Using the Markov Decision Model Velmurugan K., Saravanasankar S., Venkumar P., Sudhakarapandian R., Di Bona G. WOS 1026-7077
391 Investigation of Wear and Wire Electrical Discharge Machining Characteristics of Al-Mg-MoS2 Composites Using Response Surface Method Kumar S.S., Pandian R.S., Pitchipoo P., Senthilkumar T.S., Ponnambalam S.G. WOS 0090-3973
392 Effect of ply orientation and laminate thickness on carbon fibre reinforced polymers under low-velocity impact [Einfluss der Gewebeorientierung und Laminatdicke auf kohlenstofffaserverstärkte Polymere unter Stoßbeanspruchung mit niedriger Geschwindigkeit] Hiremath V.S., Reddy D.M. WOS 1521-4052
393 Carbon Nanotubes: An Optimistic Nanomaterial with Superfluity Characteristics in Drug Delivery for the Treatment of Arthritis Srinivasan V., Palanisamy P. WOS 0019-5464
394 Performance Enhancement of Semi- active Continuous Skyhook Control Using Chaotic Map Particle Swarm Optimization-Based Stability Augmentation System Rajasekharan Unnithan A.R., Subramaniam S. SCOPUS 2770-3479
395 Design, analysis and validation of a centralized shifting mechanism with an electrical actuator Kannan C., Agarwal S., Dighe H., Dash R.K. SCOPUS 2631-8695
396 Recent advancements of signal processing and artificial intelligence in the fault detection of rolling element bearings: a review Anwarsha A., Babu T.N. SCOPUS 1392-8716
397 Fault detection and identification in friction drilling process Narayana Moorthy N., Kanish T.C. SCOPUS 2289-7232
398 Feasibility of friction stir welding for in- space joining processes: a simulation- based experimentation Khanna M., Chadha U., Banerjee A., Singh R.P., Ghiridharan H., Narayanan D., Kataray T., Humrutha G., Selvaraj S.K., Dhanalakshmi S., Nagalakshmi R., Jayakumar K., Karthikeyan B. SCOPUS 1955-2513
399 Machining of different superalloys under MQL using hBN nanofluids K V. SCOPUS 2374-068X
400 A hybrid algorithm for multi-objective optimisation of parameters nanofluid in MQL-turning of Inconel X-750 Venkatesan K., Devendiran S., Murali T. SCOPUS 2374-068X
401 Experimental learning using Remotely Reality in Engineering education: a systematic literature review [Aprendizaje experimental mediante realidad remota en la enseñanza de la ingeniería: Una revisión de literatura] Swaminathan J., Medina- Cárdenas Y., Rico- Bautista D. SCOPUS 1646-9895
402 Analysis of effective parameters of buildings glazing on energy savings and carbon emission mitigation prospective Maduru V.R., Shaik S., Cuce E., Kirankumar G., Chelliah A., Afzal A., Mohanty C.P. SCOPUS 2162-8246
403 Caption Generation Based on Emotions Using CSPDenseNet and BiLSTM with Self-Attention Priya K., Karthika P., Kaliappan J., Selvaraj S.K., Nagalakshmi R., Molla B. SCOPUS 1687-9724
404 Comparative analysis of cross flow and jet impingement techniques of heat sink in electronics cooling Parthipan D., Rajagopal D. SCOPUS 2214-7853
405 Industrial internet of things in intelligent manufacturing: a review, approaches, opportunities, open challenges, and future directions Gupta P., Krishna C., Rajesh R., Ananthakrishnan A., Vishnuvardhan A., Patel S.S., Kapruan C., Brahmbhatt S., Kataray T., Narayanan D., Chadha U., Alam A., Selvaraj S.K., Karthikeyan B., Nagalakshmi R., Chandramohan V. SCOPUS 1955-2513
406 Quality control tools and digitalization of real-time data in sustainable manufacturing Menon A.P., Lahoti V., Gunreddy N., Chadha U., Selvaraj S.K., Nagalakshmi R., Jayakumar K., Karthikeyan B. SCOPUS 1955-2513
407 Analysing the challenges in building resilient net zero carbon supply chains using Influential Network Relationship Mapping Vimal K.E.K., Kumar A., Sunil S.M., Suresh G., Sanjeev N., Kandasamy J. WOS 0959-6526
408 Hydrogen and dual fuel mode performing in engine with different combustion chamber shapes: Modelling and analysis using RSM-ANN technique Khandal S.V., Razak A., Veza I., Afzal A., Alwetaishi M., Shaik S., Abulut Ü., Rashedi A. WOS 0360-3199
409 Conductive and convective heat transfer augmentation in flat plate solar collector from energy, economic and environmental perspectives a comprehensive review Sharma A., Gunreddy N., Mulamalla A.R., Duraisamy S., Sivan S., Poongavanam G.K., Kumar B. WOS 1614-749
410 Exploring the potential of third- generation microalgae bio-alcohol and biodiesel in arresting particulate smoke emissions and greenhouse gases using CART Jacob A., Ashok B., Lawrence J., Soosairaj A.S., Anandan J., Elango M. WOS 1614-749
411 Experimental investigation on the performance characteristics and emissions of a CI engine fueled with enhanced microwave-assisted Karanja seed bio-oil Anbu M., Balakichenin R., Muthaiyan P., Sundaramoorthy S., Amesho K.T.T., Subramani V. WOS 1614-749
412 Computational fluid dynamicsbased parametric study on the performance of solar air heater channel Burye N.N., Sathyamurthy R., Rajagopal D. WOS 1614-749
413 The Frontiers of Functionalized Nanocellulose-Based Composites and Their Application as Chemical Sensors Norrrahim M.N.F., Knight V.F., Nurazzi N.M., Jenol M.A., Misenan M.S.M., Janudin N., Kasim N.A.M., Shukor M.F.A., Ilyas R.A., Asyraf M.R.M., Naveen J. WOS 2073-4360
414 Surface Integrity of additively manufactured Inconel-718 by peening approaches Haribaskar R., Kumar T.S., Tamiloli N. WOS 1042-6914
415 Numerical and Experimental Investigations on Nonlinear Buckling Response of a Laminated Composite Shell Gnanasekar S., Rajamohan V. WOS 1758-8251
416 Novel Technique for Design and Manufacture of Alternating Gradient Composite Structure of Aluminum Alloys Using Solid State Additive Manufacturing Technique Venkit H., Selvaraj S.K. WOS 1996-1944
417 Areca fiber/epoxy nano-composite reinforced with amine-functionalized nano-alumina-enhancement in thermal and thermo-mechanical properties Dhanapal D., Kumar S.A., Ranjitha J. WOS 2352-4928
418 Effect of ammonium polyphosphate on fire-retardant, mechanical, and vibrational analysis of epoxy/glass/ramie hybrid composite Thiyagu C., NarendraKumar U. WOS 0272-8397
419 Thermal Analysis and Heat Management Strategies for an Induction Motor, a Review Madhavan S., P B R.D., Gundabattini E., Mystkowski A. WOS 1996-1073
420 A Numerical Investigation of an Artificially Roughened Solar Air Heater Yadav A.S., Alam T., Gupta G., Saxena R., Gupta N.K., Allamraju K.V., Kumar R., Sharma N., Sharma A., Pandey U., Agrawal Y. WOS 1996-1073
421 Recent developments in semi-active control of magnetorheological materials- based sandwich structures: A review Selvaraj R., Ramamoorthy M. WOS 0892-7057
422 Analysis and prediction of the joint strength of friction stir welded Aluminium 5754 to polyamide using response surface methodology and artificial neural network Adarsh S.J., Natarajan A. WOS 0892-7057
423 Bio-inspired 3D-printed lattice structures for energy absorption applications: A review Ramakrishna D., Bala Murali G. WOS 1464-4207
424 A New Two-Phase Multiplier for Flow Pressure Drop in Multiport Minichannel Condensers and Evaporators Mukkamala Y., Dirker J. WOS 1521-0537
425 Effect of thermal cyclic corrosion on the microstructural degradation of platinum aluminide coatings Rajamurugan G., Sathyajith S., Krishnasamy P. WOS 2051-672X
426 Metallographic Investigation on Postweld Heat-Treated0.21%C-1020 Steel Plates Joined by SMAW Method Dewangan S., Selvaraj S.K., Karthikeyan B., Adane T.M., Chattopadhyaya S., Królczyk G., Raju R. WOS 1687-8442
427 Surface roughnessthe key for roll bonding aluminium Biradar A., Rijesh M. WOS 0267-0836
428 Impact of Pin Length on Joint Strength of Friction Lap Welded Aluminum Alloy 7475 and Polyphenylene Sulfide Thermoplastic Polymer Joints Sandeep R., Arivazhagan N. WOS 1059-9495
429 Comparative property analysis of fused filament fabrication PLA using fresh and recycled feedstocks Dash A., Kabra S., Misra S., Hrishikeshan G., Singh R.P., Patterson A.E., Chadha U., Rajan A.J., Hirpha B.B. WOS 2053-1591
430 ANALYSIS OF ENERGY, EXERGY, ENVIRONMENTAL, AND ECONOMICS (4E) ON PHOTOVOLTAIC-THERMAL COLLECTOR SYSTEM Satpute J., Rajan J. WOS 0354-9836
431 Investigation of corrosion behaviour on NiCrCo and NiCrMo alloys exposed to molten salt for thermal energy storage applications Prem Kumar M., Manikandan M. WOS 1478-422X
432 A Combined Liquid Cold Plate and Heat Sink Based Hybrid Cooling Approach for the Temperature Control of Integrated Circuit Chips Patil N.G., Hotta T.K. WOS 1948-5093
433 Oxidation and Hot Corrosion Behaviour of Ni-Based Superalloy 825 and AISI 321 Dissimilar Laser Weldment in K2SO460% NaCl Molten Salt Environment at 650°C Muthu S.M., Arivazhagan N., Rao M.N., Arivarasu M. WOS 0031-918X
434 Mathematical Modelling for Understanding the Effect of Stress State on Relative Slip Activity in HCP Titanium Ashish Kumar Saxena, Telrandhe S., Harshavardhana N. WOS 0031-918X
435 Electric Vehicle Air Conditioning System and Its Optimization for Extended RangeA Review Jose S.S., Chidambaram R.K. SCOPUS 2032-6653
436 Solving multi-objective flexible flow-shop scheduling problem using teaching- learning-based optimisation embedded with maximum deviation theory Buddala R., Mahapatra S.S., Singh M.R. SCOPUS 1748-5037
437 Analysis on the impact of recycled ceramic waste, fiber format, and manufacturing techniques on polymer composite properties Sakthi Balan G., Prakash B., Aravind Raj S., Karthik S., Mohan Kumar V. SCOPUS 2631-8695
438 Quasi-Static and Fatigue Reliability Analysis of C45 Automotive Leaf Spring Beam Under Flexural Loads in Sub-Zero Temperature Bhanage A., Padmanabhan K. SCOPUS 1864-1245
439 Investigation on combustion and emission characteristics of hydrogen- enriched dual-fuel engine operated under waste frying oil biodiesel Subramanian J., Ekambaram P., Arumugam S.K. SCOPUS 2688-4534
440 Dynamic mechanical behavior of mono/synthetic-natural fiber compositesa review Krishnasamy P., Arvinda Pandian C.K., Rajamurugan G., Jayaraman T., Maniyambath A., Kesav Chandran J. SCOPUS 2631-8695
441 An investigation on laser shot peened surfaces Karthikeyan S., Rajagopal D., Vamsikrishna Reddy K., Prashanth B., Mukesh Reddy B., Narayanan S., Jeeva P.A. SCOPUS 1665-6423
442 An experimental study on tribofilm formation and endurance with nanolubricants Javeed A., John B. SCOPUS 1751-584X
443 Numerical investigation on the performance and combustion characteristics of a cavity based scramjet combustor with novel strut injectors Yarasai S.S., Ravi D., Yoganand S., Raj Rajagopal T.K. WOS 0360-3199
444 Marangoni convection in shallow annular pools of silicone oil heated from above Jory K., Satheesh A. WOS 2214-157X
445 Friction and wear properties of short time heat-treated and laser surface re- melted NiCr-WC composite coatings at various dry sliding conditions Deenadayalan K., Murali V., Elayaperumal A., Satheesh Kumar A., Arulvel S., Shahedi Asl M. WOS 2238-7854
446 Microwave sintering and characterization of robocasted HA, CNT-HA scaffold structures for bone regeneration applications Ravoor J., Selvam R.E. WOS 0272-8842
447 Performance and emission analysis of blends of bio-oil obtained by catalytic pyrolysis of Argemone mexicana seeds with diesel in a CI engine Pandey S.P., Upadhyay R., Prakash R., Kumar S. WOS 1614-7499
448 Technical assessment of novel organic Rankine cycle driven cascade refrigeration system using environmental friendly refrigerants: 4E and optimization approaches Bhuvaneshwaran K., Govindasamy P.K. WOS 1614-7499
449 Quantitative Analysis of Solar Photovoltaic Panel Performance with Size-Varied Dust Pollutants Deposition Using Different Machine Learning Approaches Tripathi A.K., Aruna M., Venkatesan E.P., Abbas M., Afzal A., Shaik S., Linul E. WOS 1420-3049
450 Heat Transfer Characteristics of Fullerene and Titania Nanotube Nanofluids under Agitated Quench Conditions Dennis Quadros J., Khan S.A., Prashanth T., Iqbal Mogul Y., Hanumanthraya R., Abbas M., Saleel C.A., Shaik S. WOS 2470-1343
451 Energy analysis and carbon dioxide mitigation potential of biomass-driven combined power, cooling, and cooking systems for rural applications Pavithiran C.K.P., Sakthivadivel D., Kumar G.P., John B., Jaganathan V.M., Iniyan S. WOS 2190-6823
452 Characterization and thermo-chemical conversion of invasive biomass by varying gasifying agents for hydrogen rich producer gas using ASPEN Plus Nivash V., Sakthivadivel D. WOS 2190-6823
453 Development of Multipass Gas Tungsten Arc Welding Technique for Aerospace Grade 18% Ni-Co-Mo Based Maraging Steel to Improve the Metallurgical and Mechanical Properties by Reducing Austenite Pools Arunprakash R., Manikandan M., Meshram S.D. WOS 1087-1357
454 Optimization of Performance and Emission Characteristics of the CI Engine Fueled with Preheated Palm Oil in Blends with Diesel Fuel Mohamed I.S., Venkatesan E.P., Parthasarathy M., Medapati S.R., Abbas M., Cuce E., Shaik S. WOS 2071-1050
455 Investigation of Supercritical Power Plant Boiler Combustion Process Optimization through CFD and Genetic Algorithm Methods Kumar G.N., Gundabattini E. WOS 1996-1073
456 Effect of Ta addition on the sinterability of spark plasma sintered W-Ni-Fe alloy Muthuchamy A., Srikanth M., Yadav D.V., Raja Annamalai A. WOS 0954-4054
457 Influence of Injection Pressure on the Dual-Fuel Mode in CI Engines Fueled with Blends of Ethanol and Tamanu Biodiesel Parthasarathy M., Elumalai P.V., Murunachippan M., Senthilkumar P.B., Shaik S., Sharifpur M., Khalilpoor N. WOS 1687-8078
458 The effect of copper on phase transformation, microstructure and mechanical characterization of Ni50- xTi50Cux shape-memory alloy Radhamani R., Balakrishnan M. WOS 2041-3076
459 A comprehensive study on physico- mechanical properties of non-metallic fibre reinforced SCC blended with metakaolin and alcofine Vivek S.S., Karthikeyan B., Selvaraj S.K., Pradeep Kumar M., Chadha U., Das S., Ranjani G., Rajasakthivel R., Tamilvendhan K., Adane T.M. WOS 2053-1591
460 Fractography analysis into low-C steel undergone through various destructive mechanical tests Dewangan S., Selvaraj S.K., Karthikeyan B., Chadha U., Singhal P., Sarma P.P., Raju P.V., Kumar U., Pradeep Kumar M. WOS 2053-1591
461 Analysis and prediction of abrasion wear properties of glassepoxy composites filled with eggshell powder Ray S., Pati P.R., Gupta G., Nayak S.K. WOS 2041-3009
462 Microstructure and hot corrosion characteristics evaluation of high-velocity oxy-fuel sprayed Ni20%Cr coating on AISI 321 steel with Na2SO460%V2O5 salt deposits Muthu S.M., Arivarasu M., Sanford B.R., Dinakaran V., Gupta S. WOS 2041-3009
463 Investigation of stress and tribological properties of dental composite materials using FEM Gupta A., Mohan I., Jude R.R., Suryawanshi A., Behera N. WOS 2041-305X
464 Fault diagnosis in rotors using adaptive neuro-fuzzy inference systems Babu Rao K., Reddy D.M. WOS 2041-2983
465 Investigation of TiO2 Nano Filler in Mechanical, Thermal Behaviour of Sisal/Jute Fiber Reinforced Interpenetrating Polymer Network (IPN) Composites Gopal K.V., Kumar K.R.V., Suresh G., Rajasekharan, V., Nagarajan P.K., Meenakshi C.M. WOS 2053-1591
466 Comparative analysis of indirect, direct, and hybrid cryogenic machining of Nimonic C-263 superalloy Jadhav P.S., Mohanty C.P. WOS 2307-1877
467 PREDICTION of NANO-COATED TOOL WEAR USING BAT and WHALE OPTIMIZATION ALGORITHMS Selvaraj S.K., Kaliappan J., Kumar S.R., Prakash C., Buddhi D., Gupta L.R., Hadidi H.M. WOS 0218-625X
468 Virtual Fatigue Life Prediction of Back Strip Butt Weld Joint under Bending and Torque Load Conditions Gopalan V., Narayanaswamy H.B., Deshmukh A.R., Natarajan S., Munusamy A., Subramanian J., Chinnayan P. WOS 1392-1320
469 Performance Evaluation of a Photovoltaic-Thermal Collector Coupled Stepped Solar Still for Indian Climatic Conditions Narang A., Roy S., Kataray T., Bonde V., Rajesh S., Chiranjeevi C., Chadha U., Hirpha B.B. SCOPUS 1687-5605
470 Identification and severity assessment of challenges in the adoption of industry 4.0 in Indian construction industry Singh A., Kumar V., Verma P., Kandasamy J. SCOPUS 1029-3132
471 Numerical investigations on the testing and selection of different phase change materials for peak load reduction in buildings of Indian climates Dhayanithi J., Gupta M.K., Hotta T.K., Das T. SCOPUS 2214-7853
472 Modeling and Simulation of Brake Disc Using Lightweight Materials Bheda T., Joshi D., Dinesh Kumar P.K., Darius Gnanaraj S. SCOPUS 2250-2130
473 Quasi-Static and Fatigue Reliability of Glass/Epoxy Composite Automotive Leaf Spring Beams Under Flexural Loads at Sub-Zero Temperatures Bhanage A., Padmanabhan K. SCOPUS 1864-1245
474 Effects of feed and draw solution temperature on the performance of Aquaporin HFFO.6 membrane in forward osmosis Dsilva Winfred Rufuss D., Wu Y., Davies P.A. SCOPUS 2214-7853
475 Design and Development of Hot Vapour Polishing System and Optimization of Its Process Parameters for FDM Printed Parts Kishore S.R., Mathew A., Tomy A.T., Sugavaneswaran M., John Rajan A. SCOPUS 0354-8996
476 Review of Physical, Mechanical, and Biological Characteristics of 3D-Printed Bioceramic Scaffolds for Bone Tissue Engineering Applications Thangavel M., Elsen Selvam R. WOS 2373-9878
477 Mechanical properties of cellulose-based multiscale composites: A review Ganapathy V., Muthukumaran G., Sudhagar P.E., Rashedi A., Norrrahim M.N.F., Ilyas R.A., Goh K.L., Jawaid M., Naveen J. WOS 0272-8397
478 Advances in Indoor Cooking Using Solar Energy with Phase Change Material Storage Systems Balachandran S., Swaminathan J. WOS 1996-1073
479 Current research and developments in welding of 18% nickel maraging steel Jose B., Manoharan M., Natarajan A., Muktinutalapati N.R., Madhusudhan Reddy G., Meshram S.D. WOS 2041-3076
480 Understanding the effect of particle reinforcement on friction stir weldment: A review ShivaKumar G.N., Rajamurugan G. WOS 2041-3076
481 A review on -Ti alloys for biomedical applications: The influence of alloy composition and thermomechanical processing on mechanical properties, phase composition, and microstructure Kanapaakala G., Subramani V. WOS 2041-3076
482 Review of bioresorbable AZ91, AZ31 and MgZnCa implants and their manufacturing methods Ezhilmaran V., Suya Prem Anand P., Kannan S., Sivashanmugam N., Jayakrishna K., Kalusuraman G. WOS 0267-0836
483 A concise approach to designing an intelligent welding station system platform Saicharan K., Sai M.K., Chandrasekhar P., Gopinath A., Selvaraj S.K. SCOPUS 1955-2513
484 Green manufacturing via machine learning enabled approaches Raj A., Gyaneshwar A., Chadha U., Chadha A., Asija A., Abrol A., Priya S., Alam A., Joshi A., Bastola K., Selvaraj S.K., Karthikeyan B., Nagalakshmi R., Chandramohan V., Hadidi H. SCOPUS 1955-2513

2021

Sl No Title of paper Name of the author/s Name of journal Indexed In
Scopus / WOS/Pub Med / ICI / Non Scopus
ISSN number
1 Selection of the best healthcare waste disposal techniques during and post COVID-19 pandemic era Manupati V.K., Ramkumar M., Baba V., Agarwal A. Journal of Cleaner Production WOS 0959-6526
2 Nanocellulose in food packaging: A review Ahankari S.S., Subhedar A.R., Bhadauria S.S., Dufresne A. Carbohydrate Polymers WOS 0144-8617
3 Enhancement of heat transfer in a combined solar air heating and water heater system Ganesh Kumar P., Balaji K., Sakthivadivel D., Vigneswaran V.S., Velraj R., Kim S.C. Energy WOS 0360-5442
4 Performance optimization of mild hybrid passenger vehicle by dual control strategy for city driving cycle Shanu P.N., Senthilkumar S. Energy WOS 0360-5442
5 In situ differentiation of human-induced pluripotent stem cells into functional cardiomyocytes on a coaxial PCL- gelatin nanofibrous scaffold Sridharan D., Palaniappan A., Blackstone B.N., Dougherty J.A., Kumar N., Seshagiri P.B., Sayed N., Powell H.M., Khan M. Materials Science and Engineering C WOS 0928-4931
6 Strategic design of wall envelopes for the enhancement of building thermal performance at reduced air- conditioning costs Saboor S., Chelliah A., Gorantla K.K., Kim K.- H., Lee S.-H., Shon
Z.H., Brown R.J.C.
Environmental Research WOS 0013-9351
7 Experimental & predicative analysis of engine characteristics of various biodiesels Rajak U., Nashine P., Chaurasiya P.K., Verma T.N., Patel D.K., Dwivedi G. Fuel WOS 0016-2361
8 Clean Karanja methyl ester compatibility study on long term tribological behavior of a compression ignition engine Sudan Reddy Dandu M., Nanthagopal K. Fuel WOS 0016-2361
9 A comparative evaluation of cetane enhancing techniques for improving the smoke, NOx and BSFC trade-off in an automotive diesel engine Chacko N., Johnson C., Varadarajan P., Sai Srinivas S., Jeyaseelan T. Fuel WOS 0016-2361
10 Experimental investigation of nanofluid based photovoltaic thermal (PV/T) system for superior electrical efficiency and hydrogen production Sangeetha M., Manigandan S., Ashok B., Brindhadevi K., Pugazhendhi A. Fuel WOS 0016-2361
11 A critical insight review on homogeneous charge compression ignition engine characteristics powered by biofuels Saiteja P., Ashok B. Fuel WOS 0016-2361
12 Conjugate effect on flow boiling instability in wavy microchannel Tiwari N., Moharana M.K. International Journal of Heat and Mass Transfer WOS 0017-9310
13 Co-pyrolysis of microalgae and municipal solid waste: A thermogravimetric study to discern synergy during co-pyrolysis process Varsha S.S.V., Vuppaladadiyam A.K., Shehzad F., Ghaedi H., Murugavelh S., Dong W., Antunes E. Journal of the Energy Institute WOS 1743-9671
14 Effects of cryo-FSP on metallurgical and mechanical properties of stir cast Al7075–SiC nanocomposites Kumar A., Pal K., Mula S. Journal of Alloys and Compounds WOS 0925-8388
15 Thermomechanical roll bonding of Al- 6063 strips Biradar A., Rasiwasia  R., Soni J., Orłowska M., M R. Journal of Alloys and Compounds WOS  0925-8388
16 A novel approach in selective assembly with an arbitrary distribution to minimize clearance variation using evolutionary algorithms: a comparative Nagarajan L., Mahalingam S.K., Kandasamy J., Gurusamy S. Journal of Intelligent Manufacturing WOS 0956-5515
17 Influence of particle attrition on erosive wear of bends in dilute phase pneumatic conveying Alkassar Y., Agarwal V.K., Pandey R.K., Behera N. Wear WOS 0043-1648
18 Suppression of coffee ring effect in high molecular weight polyacrylamide droplets evaporating on hydrophobic surfaces Raghuram G.K.S., Bansal L., Basu S., Kumar A. Colloids and Surfaces A: Physicochemical and Engineering Aspects WOS 0927-7757
19 Optimization strategies for improved biogas production by recycling of waste through response surface methodology and artificial neural network: Sustainable energy perspective research Gopal L.C., Govindarajan M., Kavipriya M.R., Mahboob S., Al-Ghanim K.A., Virik P., Ahmed Z., Al-Mulhm N., Senthilkumaran V., Shankar V. Journal of King Saud University - Science WOS 1018-3647
20 A review on microbial degradation of drinks and infectious diseases: A perspective of human well-being and capabilities Shankar V., Mahboob S., Al-Ghanim K.A., Ahmed Z., Al-Mulhm N., Govindarajan M. Journal of King Saud University - Science WOS 1018-3647
21 Energy, Exergy, and Economic analysis of low thermal conductivity basin solar still integrated with Phase Change Material for energy storage Vigneswaran V.S., Kumar P.G., Sakthivadivel D., Balaji K., Meikandan M., Dinakar B.V., Kamal K.K., Kumaresan G. Journal of Energy Storage WOS 2352-152X
22 Property evaluation of hot extruded aluminum alloy – Graphene nanocomposites Prashantha Kumar H.G., Anthony Xavior M., Simon Lobo L. Materials Letters WOS 0167-577X
23 Multi-Objective Optimization on Vibration and Noise Characteristics of Light Duty Biofuel Powered Engine at Idling Condition Using Response Surface Methodology Ashok B.,  Jeevanantham A.K., Prabhu K., Shirude P.M., Shinde D.D., Nadgauda N.S., Karthick C. Journal of Energy Resources Technology, Transactions of the ASME WOS 0195-0738
24 Effect of heating modes on reactive sintering of Ca3Co4O9 ceramics Teja P.R., Annamalai A.R., Evangeline T. G., Srikanth M., Agrawal D.K., Jen C.-P. Materials WOS 1996-1944
25 Effect of substrate plate heating on the microstructure and properties of selective laser melted Al-20Si-5Fe- 3Cu-1Mg Alloy Ma P., Ji P., Jia Y., Shi X., Yu Z., Prashanth K.G. Materials WOS 1996-1944
26 People and social media platforms for positive mental health- A paradigm shift: A case on COVID-19 impact form India Lathabhavan R. Asian Journal of Psychiatry WOS 1876-2018
27 Integrating sustainability and remanufacturing strategies by remanufacturing quality function deployment (RQFD) Vimal K.E.K., Kandasamy J., Duque A.A. Environment, Development and Sustainability WOS 1573-2975
28 Removal of water and their soluble materials from fuels using Moringa oleifera loaded keratin-co-sodium acrylate hydrogel Palanisamy P., Pavadai P., Arunachalam S., Pandian S.R.K., Ravishankar V., Govindaraj S., Somasundaram B., Panneerselvam T., Kunjiappan S. Journal of Porous Materials WOS 1573-4854
29 Investigations into transient wakes behind a custom airfoil undergoing pitching motion V.K V., Patel D.K., Roy S., Goli S., Roy A. European Journal of Mechanics, B/Fluids WOS  0997-7546
30 Innovation of thermoplastic polymers and metals hybrid structure using friction stir welding technique: challenges and future perspectives Sandeep R., Arivazhagan N. Journal of the Brazilian Society of Mechanical Sciences and Engineering WOS 1806-3691
31 Characterization of the soft zone in dissimilar welds joint of 2.25Cr-1Mo and lean duplex LDX2101 steel Pandey C., Thakare J.G., Tharaphadar P., Kumar P., Gupta A., Sirohi S. Fusion Engineering and Design WOS 0920-3796
32 Effect of Y2O3 on Mechanical and Corrosion Properties of Fe and Fe-Ni Alloys Prepared by Mechanical Alloying Followed by Spark Plasma Sintering Arora A., Kumar A., Mula S. Journal of Materials Engineering and Performance WOS 1059-9495
33 Investigation of Double-Pulsed Gas Metal Arc Welding Technique to Preclude Carbide Precipitates in Aerospace Grade Hastelloy X Sathishkumar M., Bhakat Y.J., Kumar K.G., Giribaskar S., Oyyaravelu R., Arivazhagan N., Manikandan M. Journal of Materials Engineering and Performance WOS 1059-9495
34 Developing a strategic sustainable facility plan for a hospital layout using electre and apples procedure K.e.k V., Kandasamy J., Nadeem S.P., Kumar A., Šaparauskas J., Garza- Reyes J.A., Trinkūnienė E. International Journal of Strategic Property Management WOS 1648-9179
35 Investigation of Al-Mg based composite incorporated with MoS2 through powder metallurgy Senthil Kumar S., Sudhakara Pandian R., Pitchipoo P., Rajakarunakaran S., Rajesh S. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering WOS 0954-4089
36 Heat transfer characteristics of high heat generating integrated circuit chips cooled using liquid cold plate-a combined numerical and experimental study Patil N.G., Hotta T.K. Journal of Thermal Science and  Engineering Applications WOS 1948-5085
37 Plectranthus amboinicus Leaf Extract Synthesized Spherical like-TiO2 Photoanode for Dye-Sensitized Solar Cell Application Rajendhiran R., Deivasigamani V., Palanisamy J., Pitchaiya S., Eswaramoorthy N., Masan S. Silicon WOS 1876-9918
38 Optimal Sequence Planning for Robotic Sorting of Recyclables from Source-Segregated Municipal Solid Waste Gundupalli S.P., Shukla R., Gupta R., Hait S., Thakur A. Journal of Computing and Information Science in Engineering WOS 1530-9827
39 Critical review towards thermal management systems of lithium-ion batteries in electric vehicle with its electronic control unit and assessment tools Kannan C., Vignesh R., Karthick C., Ashok B. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering WOS 0954-4070
40 An optimal parameter identification approach in foil bearing supported high-speed turbocharger rotor system Mutra R.R., Srinivas J.,
Rządkowski R.
Archive of Applied Mechanics WOS 0939-1533 
41 Mitigation of harmful exhaust pollutants of DI diesel engine using emulsified fuel and hythane gas in a dual-fuel mode Gopidesi R.K., Sr P., Dhana Raju V. Energy Sources, Part A: Recovery, Utilization and Environmental Effects WOS 1556-7230
42 Energy analysis and water conservation measures by water audit at thermal power stations Nandini M., Raja Sekhar Y., Subramanyam G. Sustainable Water Resources Management SCOPUS 2363-5037
43 Performance and Environmental Studies of a Compression-Ignition
Stationary Engine Under Biogas Diesel
Dual-Fuel Mode
Sahoo B.B., Sahoo N., Saha U.K. Journal of The Institution of Engineers (India): Series C SCOPUS 2250-0545
44 Ergonomic Assessment of Postural Loads in Small- and Medium-Scale Foundry Units Qureshi A.M., Solomon D.G. Journal of The Institution of Engineers (India): Series C SCOPUS 2250-0545
45 Quantifying wind-driven rain on a heritage facade through computational fluid dynamics Ghosh S., Dugar Y., Kakoti N., Shah C. International Journal of Computer Aided Engineering and Technology SCOPUS 1757-2665
46 Thermodynamic and experimental analysis of turbocharger for a downsized LPG fuelled automotive SI engine Alexander J., Porpatham E. International Journal of Energy and Environmental Engineering SCOPUS 2251-6832
47 Nanoparticles and their biomedical applications Ojo O.A., Olayide I.I., Akalabu M.C., Ajiboye B.O., Ojo A.B., Oyinloye B.E., Ramalingam M. Biointerface Research in Applied Chemistry SCOPUS 2069-5837
48 Surface Modification and Biological Approaches for Tackling Titanium Wear-Induced Aseptic Loosening Vishnu J., Manivasagam G. Journal of Bio- and Tribo-Corrosion SCOPUS 2198-4220
49 Application of poly-ε-caprolactone in extrusion-based bioprinting Borkar T., Goenka V., Jaiswal A.K. Bioprinting SCOPUS 2405-8866
49-A An overview of dynamic modeling of Rolling Element bearings Surajkumar G Kumbhar, Edwin Sudhagar, RG Desavale Noise & Vibration Worldwide SCOPUS 0957-4565
49-B Dynamic Characteristics of Woven Flax/Epoxy Laminated
Composite Plate
Venkatachalam Gopalan, Vimalanand Suthenthiraveerappa, A. Raja Annamalai, Santhanakrishnan Manivannan, Vignesh Pragasam, Panidvelan Chinnaiyan, Giriraj Mannayee, Chun-Ping Jen Polymers WOS  
49-C Calculation, design and analysis of two stage single speed gearbox for all terrrain vehicle for baja sae BhimavarapuSrikar Reddy, Kishore Kumar Mahato Materials Today: Proceedings SCOPUS 2214-7853
50 Scope of 3D printing in manufacturing industries-A review Bolugoddu Sandeep, T.T.M. Kannan ,J. Chandradass, M. Ganesan, A. John Rajan Materials Today: Proceedings SCOPUS  
51 Evaluation of Optical Transmissivity of Transparent Materials on the
Performance of Solar Flat Plate Collectors
Saboor Shaik, Manvendra Bhardwaj , Somya Agarwal , Raja Sekhar Yendaluru , Md Hasanuzzaman , Viswanatha Sharma Korada  Journal of Solar Energy Engineering WOS 0199-6231
52 Transforming Waste Disposals into Building Materials to Investigate Energy Savings and Carbon Emission Mitigation Potential Chelliah, A., Saboor, S Environmental Science and Pollution Research  WOS 0944-1344
53 Impact of Inlet Angle on Cooling of a Continuously Variable Transmission in a BAJA SAE Vehicle Amitabh Das, Tarashekhar Padhy, Kannan Chidambaram Lecture Notes in Mechanical Engineering SCOPUS 978-981-15-7778-9
54 Comparison of the hydrogen powered homogeneous charge compression ignition mode with multiple injection schedules and the dual fuel mode using a twin-cylinder engine S.Sathishkumar, M. Mohamed Ibrahim International Journal of Hydrogen Energy WOS  
55 Enhancement of cooling rate using nanofluid and hybrid nanofluid in cooling hot titanium plate John George, Sreeneesh C., Soorej E.S., Sreejitha N., Noona C.A. Sreekanth M. S. Materials today: Proceedings Scopus 2214-7853
56 In Vitro and In Vivo Evaluation of Carboxymethyl Cellulose Scaffolds for Bone Tissue Engineering Applications G. Priya, B. Madhan, U. Narendrakumar, R. V. Suresh Kumar, and I. Manjubala ACS Omega WOS 2470-1343
57 Characterization and In Vitro Evaluations of Injectable Calcium Phosphate Cement Doped with Magnesium and Strontium V. H. Arkin, U. Narendrakumar, H. Madhyastha, and I. Manjubala ACS Omega WOS 2470-1343
58 Design and implementation of an intelligent digital pitch controller for digital hydraulic pitch system hardware-in-the-loop simulator of wind turbine V Lakshmi Narayanan, R Ramakrishnan  International journal of green energy Scopus/WOS 1543-5075
59 Optimization of compression ratio and injection timing of a diesel engine Fueled with oxygenated blends using fuzzy logic-based Taguchi method Ramesh Kumar Chidambaram, Ankit Sonthalia , Gopal Poornananadan ,Edwin Geo Varuvel, Thiyagarajan Subramanian Energy Sources, Part A: Recovery, Utilization, and Environmental Effects WOS  
60 Characteristic analysis of dissimilar metal weld for AISI304 with
SA213T22 in super heater coils
K. Chandrasekaran, P. Ranjith Kumar, R. Ramanathan, J. Chandradass, T.T.M. Kannan, A. John Rajan Materials Today: Proceedings SCOPUS  
61 Development of computer vision for inspection of bolt using
convolutional neural network
A. John Rajan, K. Jayakrishna, T. Vignesh, J. Chandradass, T.T.M. Kannan Materials Today: Proceedings SCOPUS  
62 Enhancement of idling characteristics using multi-objective approach in light-duty diesel Vehicle fuelled with orange peel biofuel Vignesh R., Ashok B., Jeevanantham A.K., Jacob A., Bhembre R.D.P., Sharma S.S., Hire K.R.B. Fuel WOS 0016-2361
63 Investigations on fatigue analysis and biomimetic mineralization of glass fiber/sisal fiber/chitosan reinforced hybrid polymer sandwich composites Arumugam S., Kandasamy J., Sultan M.T.H., Shah A.U.M.,
Safri S.N.A.
Journal of Materials Research and Technology WOS 2238-7854
64 Effect of grain boundary precipitation on the mechanical integrity of EBW joints of Inconel 625 Ramkumar K.D., Mulimani S.S., Ankit K., Kothari A., Ganguly S. Materials Science and Engineering A WOS 0921-5093
65 Towards better performances for a novel rooftop solar PV system Kumar Behura A., Kumar A., Kumar Rajak D., Pruncu C.I., Lamberti L. Solar Energy WOS 0038-092X
66 Effect of nano copper on the densification of spark plasma sintered w–cu composites Madhur V., Srikanth M., Annamalai A.R., Muthuchamy A., Agrawal D.K., Jen C.-P. Nanomaterials WOS 2079-4991
67 Performance of heat transfer mechanism in nucleate pool boiling - a relative approach of contribution to various heat transfer components Kumar A., Behura A.K., Rajak D.K., Kumar R., Ahmadi M.H., Sharifpur M., Bamisile O. Case Studies in Thermal Engineering WOS 2214-157X
68 Spark plasma sintering of molybdenum silicides synthesized from oxide precursors Ovalı D., Tarraste M., Kaba M., Ağaoğulları D., Kollo L., Prashanth K.G., Lütfi Öveçoğlu M. Ceramics International WOS 0272-8842
69 Microbial degradation of plastics: Sustainable approach to tackling environmental threats facing big cities of the future Venkatesh S., Mahboob S., Govindarajan M., Al- Ghanim K.A., Ahmed Z., Al-Mulhm N., Gayathri R., Vijayalakshmi S. Journal of King Saud University - Science WOS 1018-3647
70 A novel water quench approach for enhancing the surface Arulvel S., Dsilva Winfred Rufuss D., Surfaces and Interfaces WOS 2468-0230
71 Evaporation-induced alterations in oscillation and flow characteristics of a sessile droplet on a rose- mimetic surface Kabi P., Razdan V., Roy D., Bansal L., Sahoo S., Mukherjee R., Chaudhuri S., Basu S. Soft Matter WOS 1744-683X
72 Dimensionless Parameters to Identify Transition from Stratified to Non-stratified Flow Pattern in Liquid–Liquid Horizontal Pipe Flow Ahmed S.A., John B. Flow, Turbulence and Combustion WOS 1386-6184
73 Effect of shot blasting on droplet contact angle of carbon aided phase change nanocomposites Ganesh Kumar P., Prabakaran R., Sakthivadivel D., Thangapandian N., Velraj R., Kim S.C. Surface Engineering WOS 0267-0844
74 Effect of S-2304 wire-mesh angle in hemp/flax composite on mechanical and twist drilling surface response analysis Krishnasamy P., Rajamurugan G., Muralidharan B., Arbat A.P., Kishorkumar B.P. Journal of Industrial Textiles WOS 1528-0837
75 Parametric design of turbocharger rotor system under exhaust emission loads via surrogate model Mutra R.R., Srinivas J. Journal of the Brazilian Society of Mechanical Sciences and Engineering WOS 1678-5878
76 Sustainable Electrical Discharge Machining of Nimonic C263 Superalloy Shastri R.K., Mohanty C.P. Arabian Journal for Science and Engineering WOS 2191-4281
77 Assessment on the impact of FSP process parameters on microstructural, mechanical and wear behaviour of FSPed AA6082 Prabhu M.S., Elayaperumal A., Arulvel S., Khan M.W. Surface Topography: Metrology and Properties WOS 2051-672X
78 Prospects of pulsed current arc welding on aerospace grade Hastelloy X Sathishkumar M., Manikandan M., Arivazhagan N. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering WOS 0954-4089
79 Assessment on dynamic characterization of the cylindrical laminated composite shallow shell panel through experimental and numerical approach Subramani M., Ramamoorthy M. Archive of Applied Mechanics WOS 0939-1533
80 Investigation of the shelf life of the optimized Neem biodiesel and its execution and excretion characteristics on automotive diesel engine Chhabra M., Saini B.S., Dwivedi G., Behura A.K., Kumar A., Jain S., Sarin A., Verma P. Energy Sources, Part A: Recovery, Utilization and Environmental Effects WOS 1556-7230
81 Correlation of manufacturing defects and impact behaviors of kenaf fiber reinforced hybrid fiberglass/Kevlar polyester composite [Korelacja defektów produkcyjnych i odporności na uderzenie poliestrowego kompozytu hybrydowego włókno szklane/Kevlar wzmocnionego włóknem kenaf] Suriani M.J., Sapuan S.M., Ruzaidi C.M., Naveen J., Syukriyah H., Ziefarina M. Polimery/Polymers WOS 0032-2725
82 The Effects of Strain on Stability of Passivation in Austenitic Stainless Steels: Comparison with Heat Treatment Srinivasan N., Kumaran S.S. Experimental Techniques WOS 0732-8818
83 Effect of rotating control cylinder location on vortex shedding behind a main cylinder Deepakkumar R., Jayavel S. Fluid Dynamics Research WOS 0169-5983
84 Effect of conjugate heat transfer in single-phase laminar flow through partially heated microtubes Tiwari N., Moharana M.K. Sadhana - Academy Proceedings in Engineering Sciences WOS 0256-2499
85 Optimal disassembly sequence generation and disposal of parts using stability graph cut-set method for End of Life product Gunji B.M., Pabba S.K., Rajaram I.R.S., Sorakayala P.S., Dubey A., Deepak B.B.V.L.,
Biswal B.B., Bahubalendruni M.V.A.R.
Sadhana - Academy Proceedings in Engineering Sciences WOS 0256-2499
86 Development of experimental methodology for estimation of thermo-physical properties of engineering materials using inverse method Prithiviraajan R.N., Somasundharam S., Reddy K.S. Thermal Science and Engineering Progress SCOPUS 2451-9049
87 A detailed study on design, fabrication, analysis, and testing of the anti-roll bar system for formula student cars Kelkar S.S., Gautam P., Sahai S., Agrawal P.S., Manoharan R. SN Applied Sciences SCOPUS 2523-3971
88 Review and analysis of solids friction factor correlations in fluidized dense phase conveying Shijo J.S., Behera N. Tribology - Materials, Surfaces and Interfaces SCOPUS 1751-584X
89 Characteristics of Thermally Sprayed Alumina-Titania Ceramic Coatings obtained from Conventional and Nanostructured Powders - A Review Basha G M.T., Bolleddu V. Australian Journal of Mechanical Engineering SCOPUS 1448-4846
90 Experimental characterization of mechanical properties and microstructure study of polycarbonate (PC) reinforced acrylonitrile-butadiene-styrene (ABS) composite with varying PC loadings Kumar M., Ramakrishnan R., Omarbekova A., Santhosh K.R. AIMS Materials Science SCOPUS 2372-0484
91 Machinability studies on Al7075- based hybrid composites reinforced with SiC, graphene and CNT Ajithkumar J.P., Xavior M.A. International Journal of Machining and Machinability of Materials SCOPUS 1748-5711
92 Sustainable business practices and challenges in Asia: a systematic review Lathabhavan R. International Journal of Organizational Analysis SCOPUS 1934-8835
93 Superiority of fuzzy AHP-VIKOR approach in an agile environment Jayakrishna K., Raj S.A., Vinodh S., Rajyalakshmi G., Sharma S. International Journal of Services and Operations Management SCOPUS 1744-2370
94 An overview of additive manufacturing technologies for musical wind instruments Damodaran A., Sugavaneswaran M., Lessard L. SN Applied Sciences SCOPUS 2523-3971
95 Effect of FDM process parameters on mechanical properties of 3D-printed carbon fibre–PLA composite Kamaal, M., M. Anas, H. Rastogi, N. Bhardwaj, and A. Rahaman Progress in Additive Manufacturing SCOPUS 2363-9520
96 Determination of Optimal Gear Ratio of BAJA SAE All-Terrain Vehicle Patel, S., Vashi, V., and Thomas, B. SAE Technical Papers SCOPUS  
97 A review on solar photovoltaic thermal integrated desalination technologies Anand B., Shankar R., Murugavelh S., Rivera W., Midhun Prasad K., Nagarajan R. Renewable and Sustainable Energy Reviews WOS 1364-0321
98 A D-A-D molecularly wired charge transfer platform for ultrasensitive detection of dopamine Swetha P., Munusamy S., Srinivas S., Kumar A.S., Wang J., He J., Jiang J. Sensors and Actuators, B: Chemical WOS 0925-400
99 Selective laser melting of Cu-Ni-Sn: A comprehensive study on the microstructure, mechanical properties, and deformation behavior Zhao C., Wang Z., Li D., Kollo L., Luo Z., Zhang W., Prashanth K.G. International Journal of Plasticity WOS 0749-6419
100 Sustainable ecological engineering systems for the treatment of domestic wastewater using emerging, floating and submerged macrophytes Selvaraj D., Velvizhi G. Journal of Environmental Management WOS 0301-4797
101 Experimental and modeling analysis of multiple-injection strategies with B20 operation in a CRDI engine Chacko N., Rajkumar S., Thangaraja J. Fuel WOS 0016-2361
102 Performance investigation of a two- stage sorption hydrogen compressor Sharma V.K., Satheesh A., Kumar E.A. International Journal of Hydrogen Energy WOS 0360-3199
103 Interfacial structure and wear properties of selective laser melted Ti/(TiC+TiN) composites with high content of reinforcements Xi L., Ding K., Gu D., Guo S., Cao M., Zhuang J., Lin K., Okulov I., Sarac B., Eckert J., Prashanth K.G. Journal of Alloys and Compounds WOS 0925-8388
104 A comprehensive investigation on Spirulina platensis - Part I: Cultivation of biomass, thermo-kinetic modelling, physico-chemical, combustion and emission analyses of bio-oil blends in compression ignition engine Nagarajan R., Dharmaraja J., Shobana S., Sermarajan A., Nguyen D.D., Murugavelh S. Journal of Environmental Chemical Engineering WOS 2213-3437
105 Numerical investigation of sloshing in tank with horivert baffles under resonant excitation using CFD code Thirunavukkarasu B., Rajagopal T.K.R. Thin-Walled Structures WOS 0263-8231
106 Performance enhancement of high heat generating IC chips using paraffin wax based mini-channels - A combined experimental and numerical approach Mathew V.K., Hotta T.K. International Journal of Thermal Sciences WOS 1290-0729
107 Physical and self–crosslinking mechanism and characterization of chitosan-gelatin-oxidized guar gum hydrogel Maiti S., Khillar P.S., Mishra D., Nambiraj N.A., Jaiswal A.K. Polymer Testing WOS 0142-9418
108 Effect of cryogenic grinding on fatigue life of additively manufactured maraging steel Balan A.S.S., Chidambaram K., Kumar A.V., Krishnaswamy H., Pimenov D.Y., Giasin K., Nadolny K. Materials WOS 1996-1944
109 Trust-based decision-making framework for multiagent system Ponnambalam S.G., Janardhanan M.N., Rishwaraj G. Soft Computing WOS 1432-7643
110 Parametric study of wire‐edm process in al‐mg‐mos2 composite using nsga‐ii and mopso algorithms Modrak V., Pandian R.S., Kumar S.S. Processes WOS 2227-9717
111 Discernment of synergy during the co- pyrolysis of lipid-extracted microalgae and digested municipal solid waste: a thermogravimetric–mass spectrometric study Vuppaladadiyam A.K., Antunes E., Vuppaladadiyam V.S.S., Shehzad F., Somasundaram M., Memon M.Z., Song Q., Dong W., Duan H. Journal of Chemical Technology and Biotechnology WOS 1097-4660
112 Thermal mapping of a high-speed electric motor used for traction applications and analysis of various cooling methods⇔a review Gundabattini E., Mystkowski A., Idzkowski A., Raja Singh R., Solomon D.G. Energies WOS 1996-1073
113 A review on catalytic pyrolysis for high-quality bio-oil production from biomass Dada T.K., Sheehan M., Murugavelh S., Antunes E. Biomass Conversion and Biorefinery WOS 2190-6815
114 The impact resistance of highly densified metal alloys manufactured from gas-atomized pre-alloyed powders Rahmani R., Antonov M., Prashanth K.G. Coatings WOS 2079-6412
115 Encapsulation of calcium phosphates on electrospun nanofibers for tissue engineering applications Nathanael A.J., Oh T.H. Crystals WOS 2073-4352
116 Phase formation, microstructure and mechanical properties of mg67 ag33 as potential biomaterial Kosiba K., Prashanth K.G., Scudino S. Metals WOS 2075-4701
117 Large Amplitude Free Vibration Analysis of Isotropic Curved Nano-Microbeams Using a Nonlocal Sinusoidal Shear Deformation Theory- Based Finite Element Method Prateek G., Sarthak D., Vasudevan R., Haboussi M., Ganapathi M. International Journal of Structural Stability and Dynamics WOS 0219-4554 
118 Optimal Heating Method for Simultaneous Estimation of Thermal Conductivity and Diffusivity in Transient Hot-Strip Method Sankaran S., Rangarajan S. IEEE Transactions on Components, Packaging and Manufacturing Technology WOS 2156-3950
119 Fatigue Behavior of 18% Ni Maraging Steels: A Review Rohit B., Muktinutalapati N.R. Journal of Materials Engineering and Performance WOS 1059-9495
120 Development of Biomedical Implants through Additive Manufacturing: A Review Vignesh M., Ranjith Kumar G., Sathishkumar M., Manikandan M., Rajyalakshmi G., Ramanujam R., Arivazhagan N. Journal of Materials Engineering and Performance WOS 1059-9495
121 Analysis of dense phase pneumatic conveying of fly ash using CFD including particle size distribution Alkassar Y., Agarwal V.K., Pandey R.K., Behera N. Particulate Science and Technology WOS 0272-6351
122 Development of arc welding technique to preclude microsegregation in the dissimilar joint of Alloy C-2000 and C- 276 Arulmurugan B., Sathishkumar M., Balaji D., Muralikrishnan K., Pranesh S., Praveen V., Praveen Kumar K., Arivazhagan N., Manikandan M. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering WOS 0954-4089
123 Humanoid NAO: A Kinematic Encounter Sahu C., Parhi D.R., Kumar P.B., Muni M.K., Chhotray A., Pandey K.K. Robotica WOS 0263-5747
124 Heat transfer, energy, and exergy efficiency enhancement of nanodiamond/water nanofluids circulate in a flat plate solar collector Sundar L.S., Ramana E.V., Said Z., Sekhar Y.R., Chandra Mouli K.V.V., Sousa A.C.M. Journal of Enhanced Heat Transfer WOS 1065-5131
125 Thermal Behaviour Analysis and Cost- Saving Opportunities of PCM- Integrated Terracotta Brick Buildings Chelliah A., Saboor S., Ghosh A., Kontoleon K.J. Advances in Civil Engineering WOS 1687-8086
126 Effect of TiB2addition on the microstructural, electrical, and mechanical behavior of Cu- TiB2composites processed via spark plasma sintering Ayyappadas C., Teja R., Annamalai A.R., Dinesh K Agrawal, Dilkush S., Muthuchamy A. International Journal of Materials Research WOS 2195-8556
127 Effect of welding parameters on mechanical and corrosion behavior of stellite 6 cladded sa387 gr 91 with ernicr-3 buffer layer Joseph G.B., Valarmathi T.N., Rajan A.J. Transactions of the Canadian Society for Mechanical Engineering WOS 0315-8977
128 Fault Diagnostics of Roller Bearings Using Dimension Theory Kumbhar S.G., Edwin Sudhagar P. Journal of Nondestructive Evaluation, Diagnostics and Prognostics of Engineering Systems SCOPUS  0195-9298
129 Enhancement of machinability of titanium alloy in the Eductor based PMEDM process Jeavudeen S., Jailani H.S., Murugan M. SN Applied Sciences SCOPUS 2523-3963
130 Decentralized adaptive control of nonlinear interconnected systems Raj S. Mechatronic Systems and Control SCOPUS 1480-1752
131 Comparative Study on the Prediction of Aerodynamic Characteristics of Mini
- Unmanned Aerial Vehicle with Turbulence Models
Somashekar V., Immanuel S.R.A. International Journal of Aviation, Aeronautics, and Aerospace SCOPUS 2374-6793
132 Calibration of engine parameters and fuel blend for vibration and noise characteristics in CRDI engine fuelled with low viscous biofuel B Ashok, AK Jeevanantham, R Vignesh, Kartik R Bhat Hire, K Prabhu, RA Raaj Kumar, N Shivshankar, P Edwin Sudhagar Fuel WOS  
133 Sensitization of Austenitic Stainless Steels: Current Developments, Trends, and Future Directions Srinivasan N. Metallography, Microstructure, and Analysis SCOPUS 2192-9262
134 A critical review of incremental sheet forming in view of process parameters and process output Magdum R.A., Chinnaiyan P. Advances in Materials and Processing Technologies SCOPUS 2374-068X
135 Experimental and Numerical Analyses on the Buckling
Characteristics of Woven Flax/Epoxy Laminated Composite
Plate under Axial Compression
Venkatachalam Gopalan, Vimalanand Suthenthiraveerappa, Jefferson Stanley David, Jeyanthi Subramanian, A. Raja Annamalai, Chun-Ping Jen Polymers WOS  
136 Energy balance and emission analysis on diesel engine using different
thermal barrier coated pistons
G. Vidyasagar Reddy, R.L. Krupakaran, Hariprasad Tarigonda, D. Raghurami Reddy, N. Govindha Rasu Materials Today: Proceedings SCOPUS  
137 Enhanced electrical conductivity and structural, mechanical characterization of standalone poly(vinyl alcohol)-graphite nanoplatelets composite films G. M. Janeesh, V. Meera, A. M. Shalom, D. Rajan Babu, N. Arunai Nambi Raj, M. S. Sreekanth, V. Samba Siva, T. P. Sumangala Journal of Applied Polymer Science WOS 1097-4628
138 Investigation on the effect of injection schedule and EGR in hydrogen energy share using common rail direct injection dual fuel engine S. Sathishkumar, M. Mohamed Ibrahim International Journal of Hydrogen Energy WOS  
139 Neural Network- and Fuzzy Control-Based Energy Optimization for the Switching in Parallel Hybrid Two-Wheeler Supriya Kalyankar-Narwade, C. Ramesh Kumar, and Sanjay Patil World Electric Vehicle Journal SCOPUS  
140 A Survey on the Effectiveness of Online Teaching–Learning
Methods for University and College Students
Preethi Sheba Hepsiba Darius, Edison Gundabattini, Darius Gnanaraj Solomon Journal of The Institution of Engineers    
141 Vibration characteristics and optimal design of composite sandwich beam with partially configured hybrid MR-Elastomers Rajeshkumar Selvaraj, Mageshwaran Subramani, Manoharan Ramamoorthy Mechanics Based Design of Structures and Machines WOS  
142 Effect of solar photovoltaic and various photovoltaic air thermal systems on hydrogen generation by water electrolysis M Chandrasekar, P Gopal, C Ramesh Kumar, V Edwin Geo International Journal of Hydrogen Energy WOS  
143 Influence of CNTs grading and reinforcement on dynamic characteristics of composite Plates in thermal environment V Garg, S Saxena, G Goyal, SK Soni, B Thomas IOP Conference Series: Materials Science and Engineering SCOPUS  
144 Modelling and thermodynamic analysis of ejector flow for application at design and off design operating conditions in an ejector air conditioner Anoop Kumar M, Devendrakumar Patel Turkish Journal of Computer and Mathematics Education    
145 Machinability of Titanium alloy 6242 by AWJM through Taguchi method A.Perumal, C.Kailasanathan, Vincent Herald Wilson, T.Sampath Kumar, B.Stalin, P.R.Rajkumar Materials Today: Proceedings SCOPUS 2214-7853
146 Biodegradation properties and thermogravimetric analysis of 3D braided flax PLA textile composites Kanakannavar S, Pitchaimani J, Thalla A, Rajesh M Journal of Industrial Textiles WOS  
147 Recent Developments in Nanocellulose-Based Aerogels in Thermal Applications: A Review Ahankari S., Paliwal P., Subhedar A., Kargarzadeh H. ACS Nano WOS 1936-0851
148 Impact of biodiesel and diesel blends on the fuel filter: A combined experimental and simulation study Thangamani S., Sundaresan S.N., Kannappan S. S., Barawkar V.T., Jeyaseelan T. Energy WOS 0360-5442
149 An Efficient Context-Aware Vehicle Incidents Route Service Management for Intelligent Transport System Chavhan S., Gupta D., Nagaraju C., A R., Khanna A., Rodrigues J.J.P.C. IEEE Systems Journal WOS 1932-8184
150 Predictive correlations for heat transfer characteristics of oil-water horizontal pipe flow-an experimental study Ahmed S.A., John B. Journal of Petroleum Science and Engineering WOS 0920-4105
151 Analytical solutions for the incompressible laminar pipe flow rapidly subjected to the arbitrary change in the flow rate Kannaiyan A., Varathalingarajah T., Natarajan S. Physics of Fluids WOS 1070-6631
152 Topological Structure Design and Fabrication of Biocompatible PLA/TPU/ADM Mesh with Appropriate Elasticity for Hernia Repair Hu Q., Zhang R., Zhang H., Yang D., Liu S., Song Z., Gu Y., Ramalingam M. Macromolecular Bioscience WOS 1616-5195
153 Effect of rare earth metals (Y, la) and refractory metals (mo, ta, re) to improve the mechanical properties of w–ni–fe alloy—a review Natarajan S., Gopalan V., Rajan R.A.A., Jen C.- P. Materials WOS 1996-1944
154 Atom probe tomography analysis of hydrogen distribution in laser peened Ti6Al4V alloy to control hydrogen embrittlement Kumar G.R., Muralidharan A., Rajyalakshmi G., Swaroop S. International Journal of Advanced Manufacturing Technology WOS 0268-3768
155 4D printed stereolithography printed plant-based sustainable polymers: Preliminary investigation and optimization Danish M., Vijay Anirudh P., Karunakaran C., Rajamohan V., Mathew A.T., Koziol K., Thakur V.K., Kannan C., Balan A.S.S. Journal of Applied Polymer Science WOS 0021-8995
156 Effect of Rhenium addition on tungsten heavy alloys processed through spark plasma sintering Lakshmi Prasad B.S., Raja Annamalai A. Ain Shams Engineering Journal WOS 2090-4479
157 Analyzing the mechanical and wear behavior of age hardening processed AZ31 magnesium composites Seenuvasaperumal P., Elayaperumal A., Kumar P.S.M., Arulvel S. Surface Topography: Metrology and Properties WOS 2051-672X
158 Experimental analysis on estimating junction temperature and service life of high power LED array A. R., C. R.K., V.P. C. Microelectronics Reliability WOS 0026-2714
159 Improvement of Bonding Strength at the Interfaces in Scrap Al Alloy Composites Using Electroless Ni-P Coated SiC Chandrasekar P., Nagaraju D. Silicon WOS 1876-990X
160 AN EXPERIMENTAL STUDY ON THE IMPROVEMENT OF COEFFICIENT OF PERFORMANCE IN VAPOR COMPRESSION REFRIGERATION SYSTEM USING GRAPHENE LUBRICANT ADDITIVES Raghavulu K.V., Rasu N.G. Energy Sources, Part A: Recovery, Utilization and Environmental Effects WOS 1556-7036
161 CARIMO - A heuristic approach to machine-part cell formation Pichandi R., Gupta N.S., Rajendran C. Sadhana - Academy Proceedings in Engineering Sciences WOS 0256-2499
162 Statistical modelling and analysis of material removal rate and surface roughness during wire electrical discharge hybrid turning (WEDHT) process Vignesh M., Ramanujam R. Sadhana - Academy Proceedings in Engineering Sciences WOS 0256-2499
163 Development of Cryogenic Extrusion Techniques and Modelling of a Twin Screw Extruder: A Review Ravikumar P.S., Arumugam S.K., Gangradey R., Mukherjee S., Srinivasan K., Sadasivan S., Gupta V., Aggarwal M.C. Journal of Fusion Energy WOS 0164-0313
164 Neural network-and fuzzy control- based energy optimization for the switching in parallel hybrid two- wheeler Kalyankar-Narwade S., Chidambaram R.K., Patil S. World Electric Vehicle Journal SCOPUS 2032-6653
165 Case studies on characterization of brake pad surfaces using scanning electron microscope Babu P., Solomon D.G. Malaysian Journal of Microscopy SCOPUS 1823-7010
166 Industrial and small-scale biomass dryers: An overview Murugan P., Dhanushkodi S., Sudhakar K., Wilson V.H. Energy Engineering: Journal of the Association of Energy Engineering SCOPUS 0199-8595
167 Influence Of Cnts In Protecting Air Plasma Sprayed Al2O3 - 3 wt. % TiO2 Coated Surface Basha G. M.T., Venkateshwarlu B. Journal of Chemical Technology and Metallurgy SCOPUS 1314-7978
168 Pitch Control of a Digital Hydraulics Pitch System for Wind Turbine Based on Neuro-Fuzzy Digital Pitch Controller Narayanan V.L., Ramakrishnan R. International Journal of Renewable Energy Research SCOPUS 1309-0127
169 Sustainable sandwich composites manufactured from recycled carbon fibers, flax fibers/pp skins, and recycled pet core Jiang Q., Chen G., Kumar A., Mills A., Jani K., Rajamohan V., Venugopal B., Rahatekar S. Journal of Composites Science SCOPUS 2504-477X
170 What concerns Indian general public on second wave of COVID-19? A report on social media opinions Sv P., Lathabhavan R., Ittamalla R. Diabetes and Metabolic Syndrome: Clinical Research and Reviews SCOPUS 1871-4021
171 Radially grown carbon nanomaterials on hollow glass microspheres and their application in composite foams with excellent electromagnetic interference shielding M. Imran, S. Pal, Mousumi Upadhay Kahaly, and A. Rahaman Polymer Composites WOS 0272-8397
172 Effect of microstructural change on cutting force fluctuation Sagar V. Telrandhe, Ashish Kumar Saxena Materials Today: Proceedings SCOPUS 2214-7853
173 Experimental investigation on mechanical and vibration characteristics of Flax/CNSL composite laminates R Murugan, S Daniel Mc Arthur, G Bharath, S Abinesh, K Cibi Kumar, K Padmanabhan IOP Conference Series: Materials Science and Engineering SCOPUS  
174 Design and value engineering of a high temperature high pressure multifunctional compression moulding unit to manufacture zero defect parts KV Gopinath, K Padmanabhan IOP Conference Series: Materials Science and Engineering SCOPUS  
175 Exergy Studies on a Hybrid Desalination and Cooling Plant Chalasani Chiranjeevi, Yendaluru Raja Sekhar, Muthuswamy Natarajan, Tangellapalli Srinivas, Mehran Hashemian, Vinod Aditya Theoretical, Computational, and Experimental Solutions to Thermo-Fluid Systems: Select Proceedings of ICITFES 2020 SCOPUS  
176 Experimental Study on Vertical Axis Wind Turbine to Harness Wind Power from Rapidly Moving Railway Locomotives Yendaluru Raja Sekhar, Muthuswamy Natarajan, Chalasani Chiranjeevi, Roy Sukanta, Patil Yugandhar Theoretical, Computational, and Experimental Solutions to Thermo-Fluid Systems: Select Proceedings of ICITFES 2020 SCOPUS  
177 Smart Reader for Visually Impaired Using Raspberry Pi S Sarkar, G Pansare, B Patel, A Gupta, A Chauhan, R Yadav and N Battula IOP Conf. Series: Materials Science and Engineering SCOPUS  
178 Performance analysis of asymmetric toothed strain wave gear Bikash Routh , Vineet Sahoo and Andrzej Sobczyk Proc IMechE Part C:
J Mechanical Engineering Science
WOS 0954-4062
179 A critical review on nanorefrigerants: Boiling, condensation and tribological propertiesUne revue critique des nanofrigorigènes: propriétés d'ébullition, de condensation et tribologiques Praveen Bharathwaj R, Javeed Shaik, Joe Jones Raju, Padmanathan P, Satheesh A International Journal of Refrigeration WOS  
180 A comprehensive review on ecological approaches of waste to wealth strategies for production of sustainable biobutanol and its suitability in automotive applications Karthick C., Nanthagopal K. Energy Conversion and Management WOS 0196-8904
181 One-step synthesis and characteristics of LiOH-castor oil based stable polyurethane foam Hussain Shaik, Aabid, Banerjee Swapnil,  Ariful Rahaman, Snehalata Agashe, Afzal Khan, and Mohammed Rehaan Chandan Journal of Polymer Research WOS 1572-8935
182 Review on the effect of different processing techniques on the microstructure and mechanical behaviour of AZ31 Magnesium alloy Rakshith M., Seenuvasaperumal P. Journal of Magnesium and Alloys WOS 2213-9567
183 Bio-electrocatalytic remediation of hydrocarbons contaminated soil with integrated natural attenuation and chemical oxidant Chandrasekhar K., Velvizhi G., Venkata Mohan S. Chemosphere WOS 0045-6535
184 Cardiac Differentiation of Mesenchymal Stem Cells: Impact of Biological and Chemical Inducers Ramesh S., Govarthanan K., Ostrovidov S., Zhang H., Hu Q., Camci-Unal G., Verma R.S., Ramalingam M. Stem Cell Reviews and Reports WOS 1550-8943
185 Partial hydrogenation and hydrogen induction: A comparative study with B20 operation in a turbocharged CRDI diesel engine Jeyaseelan T., Chacko N., N P., O S.M.K.,
Alexander J., Porpatham E.
International Journal of Hydrogen Energy WOS 0360-3199
186 Advancement in graphene-based materials and their nacre inspired composites for armour applications— A review Naveen J., Jawaid M., Goh K.L., Reddy D.M., Muthukumar C., Loganathan T.M., Reshwanth K.N.G.L. Nanomaterials WOS 2079-4991
187 Performance prediction of pneumatic conveying of powders using artificial neural network method Shijo J.S., Behera N. Powder Technology WOS 0032-​5910
188 Flowshop scheduling with sequence dependent setup times and batch delivery in supply chain Rahman H.F., Janardhanan M.N., Poon Chuen L., Ponnambalam S.G. Computers and Industrial Engineering WOS 0360-8352
189 Experimental investigation on thermosyphon aid phase change material heat exchanger for electronic cooling applications Gopi Kannan K., Kamatchi R. Journal of Energy Storage WOS 2352-152X
190 Metal hydrides for thermochemical energy storage applications Choudhari M.S., Sharma V.K., Paswan M. International Journal of Energy Research WOS 0363-907X
191 Review on nanocomposites based on aerospace applications Bhat A., Budholiya S., Raj S.A., Sultan M.T., Hui D., Shah A.U.M., Safri S.N.A. Nanotechnology Reviews WOS 2191-9097
192 On the structural performance of recycled aggregate concrete columns with glass fiber‐reinforced composite bars and hoops Raza A., Rashedi A., Rafique U., Hossain N., Akinyemi B., Naveen J. Polymers WOS 2073-4360
193 New idle time-based tie-breaking rules in heuristics for the permutation flowshop scheduling problems Baskar A., Xavior M.A. Computers and Operations Research WOS 0305-0548
194 Additive Manufacturing of Aluminum- Based Metal Matrix Composites—A Review Tang S., Ummethala R., Suryanarayana C., Eckert J., Prashanth K.G., Wang Z. Advanced Engineering Materials WOS 1438-1656
195 Rapid fabrication of gelatin-based scaffolds with prevascularized channels for organ regeneration Hu Q., Tang H., Yao Y., Liu S., Zhang H., Ramalingam M. Biomedical Materials (Bristol) WOS 1748-6041
196 Annealing of Al-Zn-Mg-Cu Alloy at high pressures: Evolution of microstructure and the corrosion behavior Suo C., Ma P., Jia Y., Liu X., Shi X., Yu Z.,
Prashanth K.G.
Materials WOS 1996-1944
197 Contemporary Progresses in Ultrasonic Welding of Aluminum Metal Matrix Composites Selvaraj S.K., Srinivasan K., Chadha U., Mishra R., Arpit K., Apurb K., Hu Y.- C. Frontiers in Materials WOS 2296-8016
198 Six sigma in health-care service: a case study on COVID 19 patients’ satisfaction Raja Mohamed K.B.N., M P.R., S S., A J.R.,
Anderson R.
International Journal of Lean Six Sigma WOS 2040-4166
199 Ti6Al7Nb-based TiB-reinforced composites by selective laser melting Singh N., Acharya S., Prashanth K.G., Chatterjee K., Suwas S. Journal of Materials Research WOS 0884-2914
200 Effect of using multiwall carbon nanotube reinforced epoxy adhesive in enhancing glass fiber reinforced polymer composite through cocure manufacturing technique Dhilipkumar T., Rajesh M. Polymer Composites WOS 0272-8397
201 Study of silver nanoparticle-loaded auxetic polyurethane foams for medical cushioning applications Vinay V.C., Varma D.S.M., Chandan M.R., Sivabalan P., Jaiswal A.K., Swetha S., Kaczmarek B., Sionkowska A. Polymer Bulletin WOS 0170-0839
202 A Study on Mechanical and Morphological Analysis of Banana/Sisal Fiber Reinforced IPN Composites Vimalanathan P., Suresh G., Rajesh M., Manikandan R., Rajesh Kanna S.K., Santhanam V. Fibers and Polymers WOS 1229-9197
203 Role of the heterogeneity in microstructure on the mechanical performance of the Autogenous Gas Tungsten Arc (GTA) welded dissimilar joint of F/M P91 and SS304L steel Thakare J.G., Pandey C., Gupta A., Taraphdar P.K., Mahapatra M.M. Fusion Engineering and Design WOS 0920-3796
204 High-Surface-Energy Nanostructured Surface on Low-Modulus Beta Titanium Alloy for Orthopedic Implant Applications Vishnu J., Manivasagam G. Journal of Materials Engineering and Performance WOS 1059-9495
205 Multi-Performance Optimization in Friction Stir Welding of AA6082/B4C Using Genetic Algorithm and Desirability Function Approach for Aircraft Wing Structures Sandeep R., Jeevanantham A.K., Manikandan M., Arivazhagan N., Tofil S. Journal of Materials Engineering and Performance WOS 1059-9495
206 Technology Development for Producing Inconel 625 in Aerospace Application Using Wire Arc Additive Manufacturing Process Chintala A., Tejaswi Kumar M., Sathishkumar M., Arivazhagan N., Manikandan M. Journal of Materials Engineering and Performance WOS 1059-9495
207 Influence of Filler Wire and Welding Process to Mitigate the Microsegregation of Alloy C-2000 Using Continuous and Pulsed Current Gas Tungsten Arc Welding Techniques Arulmurugan B., Balaji D., Rajkumar S., Kamaraj M., Mageshwaran V., Sathishkumar M., Manikandan M., Arivazhagan N. Journal of Materials Engineering and Performance WOS 1059-9495
208 Design and osteogenic potential of cell-free porous scaffolds: A correlation between microporosity and bone regeneration in animal model Cheng L., Lin T., He H., Qin Z., Shi Y., Yan S., Yao Q., Shi Z., Ramalingam M. Materials Express WOS 2158-5849
209 Examining the Mediating Effects of Stress on Fear of COVID-19 and Well- being Using Structural Equation Modeling Lathabhavan R., Vispute S. International Journal of Mental Health and Addiction WOS 1557-1874
210 Pseudomonas putida APRRJVITS11 as a potent tool in chromium (VI) removal from effluent wastewater John R., Rajan A.P. Preparative Biochemistry and Biotechnology WOS 1082-6068
211 A selective voltammetric pH sensor using graphitized mesoporous carbon/polyaniline hybrid system Saikrithika S., Kumar A.S. Journal of Chemical Sciences WOS 0974-3626
212 Performance enhancement of a double-pass solar air heater with a shot-blasted absorber plate and winglets Kumar P.G., Sakthivadivel D., Balaji K., Salman M., Kim S.C. Journal of Mechanical Science and Technology WOS 1738-494X
213 Propulsion performance and wake transitions of a customized heaving airfoil Vineeth V.K., Patel D.K. International Journal of Modern Physics C WOS 0217-9792
214 Mechanical and Microstructural Characteristics of Gas Tungsten Arc Welded Similar and Dissimilar Joints of SS-316 L and Hastelloy C276 Bezawada S., Rajyalakshmi G. Transactions of the Indian Institute of Metals WOS 0972-2815
215 Studies on Super Duplex Stainless Steel Manufactured by Wire Arc Additive Manufacturing Kannan A.R., Shanmugam N.S., Ramkumar K.D., Rajkumar V. Transactions of the Indian Institute of Metals WOS 0972-2815
216 Computational intelligence paradigm for job shop scheduling and routing in an uncertain environment Chavhan S., Rodrigues J.J.P.C., Khanna A. Cyber-Physical Systems SCOPUS 2333-5785
217 An overview of bio-actuation in collagen hydrogels: a mechanobiological phenomenon Hameed P., Manivasagam G. Biophysical Reviews SCOPUS 1867-2469
218 A critical review on the classification of helminths and their mode of transmission in human beings Shobana R., Vijayalakshmi S., Ranjitha J. Research Journal of Chemistry and Environment SCOPUS 9720-626
219 Gene-expression programming for calculating discharge in meandering compound channels Mohanta A., Patra K.C. Sustainable Water Resources Management SCOPUS 2071-1050
220 Multi objective study on machining characteristics of AISI H-11 tool steel prepared by different processing techniques Margabandu V., Radhakrishnan R. Journal Europeen des Systemes Automatises SCOPUS 1269-6935
221 Machinability investigations on aerospace custom 450 alloy using TiAlN/TiCN, TiCN/TiAlN coated and uncoated carbide tools Thepperumal S.K., Margabandu V., Radhakrishnan R., Amaladas J.R., Ananthakrishnan S.V. Journal Europeen des Systemes Automatises SCOPUS 1269-6935
222 Holistic approach of optimising cross- docking in supply chain Mishra J. International Journal of Process Management and Benchmarking SCOPUS 1460-6739
223 Studies of Low-Temperature Sensitization after Sub-Surface Damage Evolution in Austenitic Stainless Steel Srinivasan N. Metallography, Microstructure, and Analysis SCOPUS 2192-9262
224 Deep learning based thermal image processing approach for detection of buried objects and mines Priya C.N.N., Ashok S.D., Majhi B., Kumaran K.S. Engineering Journal SCOPUS 0125-8281
225 Comprehensive review on leading edge turbine blade cooling technologies Sharma C., Kumar S., Singh A., Bhat Hire K.R., Karnatak V., Pandey V., Gupta J., Shrimali R., Singh S., Noorsha S.S., Gundabattini E. International Journal of Heat and Technology SCOPUS 0392-8764
226 Investigation of Multi-layered coating on Tribological property during
boring process
G. Lawrance, P. Sam Paul, Jeffrey Shaji, P. Edwin Sudhagar, P.S. Samuel Ratna Kumar Materials Today: Proceedings SCOPUS  
227 Numerical and experimental investigation on vibration analysis of laminated composite conical shell structures Akhil Chadha, P. Edwin Sudhagar,  Mageshwaran Subramani AIP Conference Proceedings SCOPUS  
228 Vibration analysis of MWCNT reinforced multi-layered sandwich composite structures with corrugated cores - an experimental study A. Paul Praveen, Prasanth, G. K. Gupta, S. Agarwal, P. Edwin Sudhagar AIP Conference Proceedings SCOPUS  
229 Application of active vibration control on single stage spur gear Manas Raman Menon, Tanay Hariprasad, Karun Thomas, Ramesh Babu Vemuluri, Siva Prasad Darla, Edwin Sudhagar P, Ashok B IOP Conference Series: Materials Science and Engineering SCOPUS  
230 Front, rear and side impact analysis of backbone chassis of a compact sports car Umang Bharatkumar Ramaiya, Ramesh Babu Vemuluri, SivaPrasad Darla, Edwin Sudhagar P, Ashok B IOP Conference Series: Materials Science and Engineering SCOPUS  
231 State of the Art Review about Bio-Inspired Design and
Applications: An Aerospace Perspective
Sejal Budholiya, Aayush Bhat , S. Aravind Raj, Mohamed Thariq Hameed Sultan, Ain Umaira Md Shah, Adi A. Basri Applied Sciences WOS  
232 Investigation of Wear Properties of Phenalkamine Cured Epoxy using Numerical Wear Modelling Ravi Teja Buddala, B Venkata Sai Krishna, Nishat Ur Rahman and M Sai Rithesh Reddy Journal of Huazhong University of Science and Technology SCOPUS 1671-4512
233 Pulsed Nd: YAG laser machining of nitinol: An experimental investigation B. Muralidharan, K. Prabu, G. Rajamurugan Journal of Micromanufacturing SCOPUS  
234 Influence of over alloyed filler wire to preclude the micro segregation in weld joint of alloy c-276 Mohan Cigurupadi Ganesan, Arulmurugan Balasubramanian, Subramani Pasupathi, Sathishkumar Mathiyazhagan, Rajamurugan Govindasamy, Arivazhagan Natarajan, Manikandan Manoharan Journal of Chemical Technology and Metallurgy SCOPUS  
235 Influence of nano TiO2/Micro (SiC/B4C) Reinforcement on the Mechanical, Wear and Corrosion Behaviour of A356 Metal Matrix Composite Dinesh paulraj, Jeyakumar P.D, G Rajamurugan, Prabu Krishnasamy Archives of Metallurgy and Materials WOS  
236 Experimental Investigation on Mechanical Properties of TIG Welded Dissimilar AISI 304 and AISI 316 Stainless Steel Using 308 Filler Rod Ramakrishnan anbalagan, Ramesh kumar T, Rajamurugan G, Sundarraju G, Selvamuthukumaran D Materials Today: Proceedings SCOPUS  
237 Effect of titanium Di-boride/copper (TiB2-Cu) Electrode on the machinability of OHNS steel by EDM Process Jayahariharapranav P , Dinesh D, MathanKumar P, Rajamurugan G, Jayakumar N, IOP Conference Series: Material Science and Engineering SCOPUS  
238 Experimental Investigation on Mechanical Properties of TIG Welded Dissimilar AISI 304L and AISI 316L Stainless Steel A Ramakrishnan, T Ramesh Kumar, G Rajamurugan, VD Tamilarasan, M Vijayakumar Advances in Materials Research SCOPUS  
239 Thermal and weld bead characteristics of bead-on-plate PGMA welding of dissimilar ASS bead on HSLA Plate Rajamurugan G., Ghosh P.K., Prabu K. et al. Transactions of the Indian Institute of Metals WOS 0972-2815
240 Chapter 11: Applications of Supercapacitor T.P. Sumangala, M. S. Sreekanth, A. Rahaman Handbook of Nanocomposite Supercapacitor Materials III Book Chapter 2196-8212
241 Performance Analysis of Tyre Manufacturing System in the SMEs
Using RAMD Approach
K. Velmurugan, P. Venkumar, R. Sudhakarapandian Mathematical Problems in Engineering WOS 1024-123X
242 Predicting the Severity of Cervical Cancer using Image Processing Technique Jeevitha N., Babu S Journal of Huazhong University of Science and Technology SCOPUS 1671-4512
243 Fuzzy Logic based Digital Hydraulics Control of Blade Pitch Angle in Wind Turbines V Lakshmi Narayanan, R Ramakrishnan  IOP Conference Series: Materials Science and Engineering. Scopus 1757-8981
244 A Fluid-Structure Interaction Based Simulation Study Of Piezoelectric Micropump For Drug Delivery Application Vante, Abhijeet B., R Ramakrishnan  IOP Conference Series: Materials Science and Engineering. Scopus 1757-8981
245 Engineered bioclimatic responses in ancient settlements: a case study Ghosh S., Bharadwaj S.J., Bharadwaj S.J., Gumber S. International Journal of Biometeorology WOS 0020-7128
246 Lubrication mechanism and lubrication characteristics analysis at the critical interface of strain wave gear under different types of surface roughness assumptions Bikash Routh, Darius Gnanaraj Solomon, P. M. Anil, Edison Gundbattini AIP Conference Proceedings SCOPUS  
247 Finite Element Simulation of Friction Stir Welding of Inconel 718 to Nimonic 80A Tom Saju,  M Velu European Journal of Computational Mechanics SCOPUS 1779-7179 
248 Fuzzy based multi-response optimization: a case study on EDM machining process Jambeswar Sahu & Sonam Shrivastava SN Applied Sciences SCOPUS  
249 A Review on Vibrations in Various Turbomachines such as Fans, Compressors, Turbines and Pumps Shivam Doshi, Anirudh Katoch, Arjun Suresh, Fadil A. Razak, Sagnik Datta, Sameer Madhavan, C. M. Zanhar & Edison Gundabattini  Journal of Vibration Engineering & Technologies WOS 2523-3920
250 Influence of fumigated calophyllum inophyllum vapours on the combustion, performance and emission characteristics of a diesel engine M. Gowtham, R. Prakash Energy Sources, Part A: Recovery, Utilization, and Environmental Effects WOS  
251 Effects of n-butanol/calophyllum inophyllum biodiesel blend injection on the combustion characteristics of reactivity controlled compression ignition engine M. Gowtham, R. Prakash International Journal of Oil, Gas and Coal Technology WOS 1753-3309
253 A novel photocrosslinked phosphate functionalized Chitosan- Sr5(PO4)2SiO4 composite hydrogels and in vitro biomineralization, osteogenesis, angiogenesis for bone regeneration application Chen Y., Udduttula A., Xie X., Zhou M., Sheng W., Yu F., Weng J.,
Wang D., Teng B., Manivasagam G., Zhang J.V., Ren P.-G., Kang
B., Zeng H.
Composites Part B: Engineering WOS 1359-8368
254 Insight into the recent advances of microwave pretreatment technologies for the conversion of lignocellulosic biomass into sustainable biofuel Hoang A.T., Nižetić S., Ong H.C., Mofijur M., Ahmed S.F., Ashok B., Bui V.T.V., Chau M.Q. Chemosphere WOS 0045-6535
255 Parametric investigation on hydrogen driven homogeneous charge compression ignition mode with advanced diesel injection using chemical kinetics based numerical model Sathishkumar S., Mohamed Ibrahim M. International Journal of Hydrogen Energy WOS 0360-3199
256 Optimization of the effect of Prandtl number, inclination angle, magnetic field, and Richardson number on double-diffusive mixed convection flow in a rectangular domain Moolya S., Anbalgan S. International Communications in Heat and Mass Transfer WOS  
257 Acoustic fluid–structure study of 2D cavity with composite curved flexible walls using graphene platelets reinforcement by higher-order finite element approach Pitchaimani J., Gupta P., Rajamohan V., Polit O., Manickam G. Composite Structures WOS 0263-8223
258 Defensive behaviour of building envelopes in terms of mechanical and thermal responsiveness by incorporating PCMs in cement mortar layers Kontoleon K.J., Stefanidou M., Saboor S., Mazzeo D., Karaoulis A., Zegginis D., Kraniotis D. Sustainable Energy Technologies and Assessments WOS 2213-1388
259 Texture dependent strain hardening in additively manufactured stainless steel 316L Kumar D., Shankar G., Prashanth K.G., Suwas S. Materials Science and Engineering A WOS 0921-5093
260 Effect of molybdenum (Mo) addition on phase composition, microstructure, and mechanical properties of pre- alloyed ti6al4v using spark plasma sintering technique Rajadurai M., Muthuchamy A., Annamalai A.R., Agrawal D.K., Jen C.-P. Molecules WOS 1420-3049
261 Semi-Double-loop machine learning based CPS approach for predictive maintenance in manufacturing system based on machine status indications Putnik G.D., Manupati V.K., Pabba S.K., Varela L., Ferreira F. CIRP Annals WOS 0007-8506
263 Performance Enhancement Study on Solar Stills by Increasing Evaporative Surface Area and Condensing Surface Area Vigneswaran S., Deeyoko L.A.J., Sakthivadivel D., Kumaresan G., Velraj R., GaneshKumar P. Energy Technology WOS 2194-4288
265 Evaluating the influence of cetane improver additives on the outcomes of a diesel engine characteristics fueled with peppermint oil diesel blend Paneerselvam P., Venkadesan G., Panithasan M.S., Alaganathan G., Wierzbicki S., Mikulski M. Energies WOS 1996-1073
266 Study of castor oil-based auxetic polyurethane foams for cushioning applications Vinay C.V., Varma D.S.M., Chandan M.R., Sivabalan P., Jaiswal A.K., Swetha S., Sionkowska A., Kaczmarek B. Polymer International WOS 1097-0126
267 State of the art review about bio- inspired design and applications: An aerospace perspective Budholiya S., Bhat A., Raj S.A., Sultan M.T.H., Shah A.U.M., Basri A.A. Applied Sciences (Switzerland) WOS 2076-3417
268 A review of the latest developments in the field of refractory high-entropy alloys Srikanth M., Raja Annamalai A., Muthuchamy A., Jen C.- P. Crystals WOS 2073-4352
269 Advances in enhancing structural and functional fatigue resistance of superelastic NiTi shape memory alloy: A Review Nargatti K., Ahankari S. Journal of Intelligent Material Systems and Structures WOS 1045-389X 
270 Free and Forced Vibration Characteristics of CNT Reinforced Composite Spherical Sandwich Shell Panels with MR Elastomer Core Subramani M., Ramamoorthy M., Arumugam A.B., Selvaraj R. International Journal of Structural Stability and Dynamics WOS 0219-4554
271 Dry Sliding Wear Behaviour of T6- Aluminium Alloy Composites Compared with Existing Aircraft Brake Pads Ashwath P., Xavior M.A. Arabian Journal for Science and Engineering WOS 1319-8025
272 High-temperature dry sliding wear behavior of Ti-10V-2Fe-3Al Calvin Samuel S., Chodancar Y., Kanther S., Arivarasu M., Prabhu T.R. Journal of Tribology WOS 1528-8897
274 In Vitro Corrosion Behavior of Selective Laser Melted Ti-35Nb-7Zr- 5Ta Ummethala R., Jayaraj J., Karamched P.S., Rathinavelu S., Singh N., Surreddi K.B., Prashanth K.G. Journal of Materials Engineering and Performance WOS 1059-9495
277 Water cooling, PSG, PCM, Cryogenic cooling strategies and thermal analysis (experimental and analytical) of a Permanent Magnet Synchronous Motor: a review Gundabattini E., Mystkowski A., Raja Singh R., Gnanaraj S.D. Sadhana - Academy Proceedings in Engineering Sciences WOS 0256-2499
278 Transport Management for Evacuation of Victims Chavhan S., Venkataram P. IEEE Transactions on Emerging Topics in Computational Intelligence SCOPUS 2471-285X
281 Smart University: A vision of technology adoption [Universidad inteligente: Una visión de la adopción de la tecnología] Rico-Bautista D., Guerrero C.D., Collazos C.A., Maestre-Góngora G., Hurtado-Alegría J.A., Medina-Cárdenas Y., Swaminathan J. Revista Colombiana de Computacion SCOPUS 1657-2831
282 Influence of fiber stacking sequences and matrix materials on mechanical and vibration behavior of jute/carbon hybrid composites Margabandu S., Subramaniam S.K. World Journal of Engineering SCOPUS 1708-5284
283 Experimental investigation on temperature profiles and residual stresses in GTAW dissimilar weldments of AA5052 and AA7075 Yelamasetti B., Kumar D., Saxena K.K., G R. Advances in Materials and Processing Technologies SCOPUS 2374-068X

Last updated on:21 July 2021

2020

Sl No Title of paper Name of the author/s Name of journal Indexed InScopus / WOS/Pub Med / ICI / Non Scopus ISSN number
1 Experimental investigation of pomegranate oil methyl ester in ceramic coated engine at different operating condition in direct injection diesel engine with energy and exergy analysis Karthickeyan V., Thiyagarajan S., Ashok B., Edwin Geo V., Azad A.K. Energy Conversion and Management WOS 1968904
2 A compressive review on the effects of alcohols and nanoparticles as an oxygenated enhancer in compression ignition engine Nanthagopal K., Kishna R.S., Atabani A.E., AlMuhtaseb A.H., Kumar G., Ashok B. Energy Conversion and Management WOS 1968904
3 An assessment on injection pressure and timing to reduce emissions on diesel engine powered by renewable fuel Karthic S.V., Senthil Kumar M., Nataraj G., Pradeep P. Journal of Cleaner Production WOS 9596526
4 Engine's behavior on hydrogen addition of waste cooking oil fueled light duty diesel engine - A dual fuel approach Raju P., Masimalai S.K., Ganesan N., Karthic S.V. Energy WOS 3605442
5 Emission reduction in CI engine using biofuel reformulation strategies through nano additives for atmospheric air quality improvement Sheriff S.A., Kumar I.K., Mandhatha P.S., Jambal S.S., Sellappan R., Ashok B., Nanthagopal K. Renewable Energy WOS 9601481
6 A study on performance, emission and combustion characteristics of diesel engine powered by nano-emulsion of waste orange peel oil biodiesel Kumar A.M., Kannan M., Nataraj G. Renewable Energy WOS 9601481
7 Validation of performance and emissions of a CI engine fueled with calophyllum inophyllum methyl esters using soft computing technique Saravanakumar L., Prakash R. Fuel WOS 162361
8 Experimental study on the effect of cetane improver with turpentine oil on CI engine characteristics Jeevanantham A.K., Madhusudan Reddy D., Goyal N., Bansal D., Kumar G., Kumar A., Nanthagopal K., Ashok B. Fuel WOS 162361
9 Effect of manifold injection of methanol/n-pentanol in safflower biodiesel fuelled CI engine Thiyagarajan S., Sonthalia A., Edwin Geo V., Prakash T., Karthickeyan V., Ashok B., Nanthagopal K., Dhinesh B. Fuel WOS 162361
10 Vibration analysis of the multi-walled carbon nanotube reinforced doubly curved laminated composite shallow shell panels: An experimental and numerical study Subramani M., Ramamoorthy M. Journal of Sandwich Structures and Materials WOS 15307972
11 On the numerical modelling and analysis of multi-directional functionally graded composite structures: A review Ghatage P.S., Kar V.R., Sudhagar P.E. Composite Structures WOS 2638223
12 Novel welding of Al0.5CoCrFeNi highentropy alloy: Corrosion behavior Sokkalingam R., Sivaprasad K., Duraiselvam M., Muthupandi V., Prashanth K.G. Journal of Alloys and Compounds WOS  09258388
13 Study of conjugate heat transfer from the impingement of an inclined free slot jet onto the moving hot surface Pawar S., Patel D.K International Communications in Heat and Mass Transfer WOS 7351933
14 Augmented heat transfer by hybrid thermosyphon assisted thermal energy storage system for electronic cooling Kannan K.G., Kamatchi R. Journal of Energy Storage WOS 2352152X
15 Microstructure and mechanical integrity relationship of PDC weld joints involving dissimilar marine grade alloys K. D.R., Pranav N.P., Sai B., D. A., Christin S.V Journal of Manufacturing Processes WOS 15266125
16 Numerical investigation on the effect of flow field and landing to channel ratio on the performance of PEMFC Selvaraj A.S., Rajagopal T.K.R. International Journal of Energy Research WOS 1099114x
17 Enhanced Channel Division Method for Estimation of Discharge in Meandering Compound Channe Mohanta A., Patra K.C., Pradhan A. Water Resources Management WOS 15731650
18 Suppression of Sommerfeld effect in a non-ideal discrete rotor system with fractional order external damping Jha A.K., Dasgupta S.S European Journal of Mechanics, A/Solids WOS 9977538
19 Investigation of machinability characteristics and comparative analysis under different machining conditions for sustainable manufacturing Venkatesan K., Devendiran S., Sachin D., Swaraj J. Measurement: Journal of the International Measurement Confederation WOS 2632241
20 Surface roughness evaluation of electrical discharge machined surfaces using wavelet transform of speckle line images Mahashar Ali J., Siddhi Jailani H., Murugan M. Measurement: Journal of the International Measurement Confederation WOS 2632241
21 Detection of flood disaster system based on IoT, big data and convolutional deep neural network Anbarasan M., Muthu B., Sivaparthipan C.B., Sundarasekar R., Kadry S., Krishnamoorthy S., Samuel R.D.J., Dasel A.A Computer Communications WOS 1403664
22 Thermal and cost analysis of various air filled double glazed reflective windows for energy efficient buildings Kirankumar G., Saboor S., Vali S.S., Mahapatra D., Talanki Puttaranga Setty A.B., Kim K.-H. Journal of Building Engineering WOS 23527102
23 Gene-expression programming for the assessment of surface mean pressure coefficient on building surfaces Mallick M., Mohanta A., Kumar A., Patra K.C. Building Simulation WOS 19968744
24 Nonlinear bending of porous curved beams reinforced by functionally graded nanocomposite graphene platelets applying an efficient shear flexible finite element approach Anirudh B., Ben Zineb T., Polit O., Ganapathi M., Prateek G. International Journal of Non-Linear Mechanics WOS 207462
25 Parameter optimization and texture evolution in single point incremental sheet forming process Basak S., Prasad K.S., Mehto A., Bagchi J., Ganesh Y.S., Mohanty S., Sidpara A.M., Panda S.K. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture WOS 20412975
26 Critical insight into biowaste-derived biocatalyst for biodiesel production Alrobaian A., Rajasekar V., Alagumalai A. Environmental Progress and Sustainable Energy WOS 19447450
27 Prediction of Wind-Induced Mean Pressure Coefficients Using GMDH Neural Network Mallick M., Mohanta A., Kumar A., Charan Patra K. Journal of Aerospace Engineering WOS 19435525
28 The Impingement Heat Transfer Data of Inclined Jet in Cooling Applications: A Review Pawar S., Patel D.K Journal of Thermal Science WOS 1993033X
29 Synthesis of magnesium aluminate spinel nanocrystallites by coprecipitation as function of pH and temperature Viswanathan T., Pal S., Rahaman A Sadhana - Academy Proceedings in Engineering Sciences WOS 9737677
30 Experiment and numerical investigation on optimal distribution of discrete ICs for different orientation of substrate board Mathew V.K., Hotta T.K International Journal of Ambient Energy Scopus 21628246
31 Experimental Investigation and Parametric Optimization on Hole Quality Assessment During Drilling of CFRP/GFRP/Al Stacks Janakiraman A., Pemmasani S., Sheth S., Kannan C., Balan A.S.S Journal of The Institution of Engineers (India): Series C Scopus 22500553
32 Fostering systematic eco-innovation in an industrial symbiosis environment using DEMATEL Jayakrishna K., Vimal K.E.K., Vibha M., Jain S., Kulatunga A.K. International Journal of Industrial and Systems Engineering Scopus 17485045
33 Powder additives influence on dielectric strength of EDM fluid and material removal Jeavudeen S., Jailani H.S., Murugan M. International Journal of Machining and Machinability of Materials Scopus 1748572X
34 Investigations of hot corrosion resistance of HVOF coated Fe based superalloy A-286 in simulated gas turbine environment Muthu S.M., M A. Engineering Failure Analysis WOS  13506307
35 Dynamic analysis of laminated composite sandwich beam containing carbon nanotubes reinforced magnetorheological elastomer Selvaraj R., Ramamoorthy M. Journal of Sandwich Structures and Materials WOS 15307972
36 Transient numerical analysis of thermophoresis and particle dynamics in a nanofluid – pool boiling conditions Karthikeyan C.P., Kalpana G., Krishnamoorthy V., Samuel A.A. Journal of Molecular Liquids WOS 1677322
37 Immobilization of Cu3(btc)2 on graphene oxide-chitosan hybrid composite for the adsorption and photocatalytic degradation of methylene blue Samuel M.S., Suman S., Venkateshkannan, Selvarajan E., Mathimani T., Pugazhendhi A Journal of Photochemistry and Photobiology B: Biology WOS  10111344
38 Realizing a novel friction stir processing-enabled FWTPET process for strength enhancement using firefly and pso methods Kumaran S.S., Kaliappan J., Srinivasan K., Hu Y.-C., Padmanaban S., Srinivasan N. Materials WOS 19961944
39 IOT based wearable sensor for diseases prediction and symptom analysis in healthcare sector Muthu B.A., Sivaparthipan C.B., Manogaran G., Sundarasekar R., Kadry S., Shanthini A., Dasel A Peer-to-Peer Networking and Applications WOS 19366450
40 Nanocellulose-based polymer composites for energy applications—A review Lasrado D., Ahankari S., Kar K. Journal of Applied Polymer Science WOS 10974628
41 On the static and dynamic stability of spherical sandwich shell panels with viscoelastic material core and laminated composite face sheets under uniaxial and biaxial harmonic excitations Biswal D.K., Mohanty S.C. Acta Mechanica WOS 16196937
42 FE simulation for stress distribution and surface deformation in Ti-6Al-4V induced by interaction of multi scale laser shock peening parameters G R.K., G R. Optik WOS 304026
43 Fabrication and Experimental Investigation on Deformation Behaviour of AlSi10Mg Foam-Filled Mild Steel Tubes Rajak D.K., Mahajan N.N., Selvaraj S.K. Transactions of the Indian Institute of Metals WOS 9751645
44 Dendrite Morphological Analysis on SMA, GMA, and PGMA Welding of Dissimilar 304LN Austenitic Stainless Steel and Micro-alloyed Steel Rajamurugan G., Ghosh P.K., Prabu K., Dinesh D., Vinukumar S.M. Transactions of the Indian Institute of Metals WOS 9751645
45 Performance analysis of different turbulence models in impinging jet cooling Pawar S., Patel D.K. International Journal of Modern Physics C WOS 17936586
46 Analytical Solution for Large Deflection of Multilayered Composite Cantilever Beams with Interlayer Slip Rajendran L., Mathew A.T. Iranian Journal of Science and Technology - Transactions of Mechanical Engineering WOS 23641835
47 A novel design of compliant forceps with serpentine flexures George B L., Bharanidaran R Australian Journal of Mechanical Engineering Scopus 22042253
48 Modelling and outcome analysis of a competitive environment – A probabilistic approach Sreerag C., Srinivas M.N., Murty A.V.S.N. Journal of King Saud University - Engineering Sciences Scopus  10183639
49 Thermodynamic simulation of CO2- Adsorbent based sorption refrigeration system Syed S.N., Sharma V.K FME Transactions Scopus 2406128X
50 Modelling of sharing networks in the circular economy Jayakumar J., Jayakrishna K., K.E.K V., Hasibuan S. Journal of Modelling in Management Scopus 17465664
51 Enhancement of mechanical properties of alloy steel by GTAW with different purge/shielding gases Britto Joseph G., John Rajan A., Murugesan G., Prabhakaran R., Jeevahan J., Mageshwaran G. FME Transactions Scopus 2406128X
52 Surface mechanical attrition treatment of low modulus Ti-Nb-Ta-O alloy for orthopedic applications Acharya S., Panicker A.G., Gopal V., Dabas S.S., Manivasagam G., Suwas S., Chatterjee K. Materials Science and Engineering C WOS 9284931
53 Control of regulated and unregulated emissions from a CI engine using reformulated nano fuel emulsions Gowtham M., Prakash R. Fuel WOS 162361
54 Supersonic flutter study of porous 2D curved panels reinforced with graphene platelets using an accurate shear deformable finite element procedure Aditya S., Haboussi M., Shubhendu S., Ganapathi M., Polit O. Composite Structures WOS 2638223
55 Direct ageing response on the microstructure and mechanical properties of electron beam welds of Ni-Cr-Fe alloy used in vacuum insulated tubing Sujai S., Devendranath Ramkumar K. Journal of Manufacturing Processes WOS 15266125
56 Study of machinability performance of Hastelloy-X for nanofluids, dry with coated tools Venkatesan K., Devendiran S., Nishanth Purusotham K., Praveen V.S. Materials and Manufacturing Processes WOS 15322475
57 Effect of magnetic field intensity on deposition of copper tool in electro discharge deposition Muralidharan B., Singh P., Chelladurai H. Journal of Micromechanics and Microengineering WOS 13616439
58 Formulation and characterization of folate receptor-targeted PEGylated liposome encapsulating bioactive compounds from Kappaphycus alvarezii for cancer therapy Baskararaj S., Panneerselvam T., Govindaraj S., Arunachalam S., Parasuraman P., Pandian S.R.K., Sankaranarayanan M., Mohan U.P., Palanisamy P., Ravishankar V., Kunjiappan S. 3 Biotech WOS 21905738
59 Influence of pulsed current arc welding to preclude the topological phases in the aerospace grade Alloy X Sathishkumar M., Manikandan M. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications WOS 20413076
60 Morphology and mechanical characterization of carbon nanotubes/epoxy based material filled with hollow glass microsphere Imran M., Rahaman A., Pal S. Materials Research Express WOS 20531591
61 Mechanical characterization and experimental modal analysis of 3D Printed ABS, PC and PC-ABS materials Kannan S., Ramamoorthy M. Materials Research Express WOS 20531591
62 Study on formability and strain hardening index: Influence of particle size of boron carbide (B4C) in magnesium matrix composites fabricated by powder metallurgy technique Rajkumar P.R., Kailasanathan C., Senthilkumar A., Selvakumar N., Johnrajan A. Materials Research Express WOS 20531591
63 A study on tribological behavior of Al4%Mg incorporated with MoS2 Senthil Kumar S., Sudhakara Pandian R., Pitchipoo P. Materials Research Express WOS 20531591
64 Impact of instantaneous curvature on force and heat generation in manufacturing processes – a mathematical modelling Sreerag C., Gokul R., Vinaykumar J., Rajyalakshmi G. Engineering Computations (Swansea, Wales) WOS 2644401
65 A combined numerical simulation and optimization model for the cooling of IC chips under forced convection Patil N.G., Hotta T.K. International Journal of Modern Physics C WOS 1291831
66 Extracting methyl-ester from waste cooking oil for fueling a light duty diesel engine–a dual fuel approach Raju P., Masimalai S.K., Ganesan N. Energy Sources, Part A: Recovery, Utilization and Environmental Effects WOS 15567230
67 Thermal energy performance of an academic building with sustainable probing and optimization with evolutionary algorithm Jain A.S., Saikia P., Rakshit D. Thermal Science and Engineering Progress Scopus 24519049
68 Investigations on tensile and flexural characteristics of fly ash and banana fiber-reinforced epoxy matrix composites Gopalan V., Sharma S.K., Jangid A.K., Pragasam V., Satonkar N., Chinnaiyan P. Engineering Transactions Scopus 24508071
69 Investigations on force generation and joint properties of dissimilar thickness friction stir corner welded AA 5086 alloy Krishnan M., Subramaniam S. Engineering Review Scopus 13309587
70 Wear – Corrosion synergistic effect on Ti–6Al–4V alloy in H2O2 and albumin environment Gopal V., Manivasagam G Journal of Alloys and Compounds WOS  09258388
71 Effect of phase transformations during aging on tensile strength and ductility of metastable beta titanium alloy Ti– 35Nb–7Zr–5Ta-0.35O for orthopedic applications Vishnu J., Sankar M., Rack H.J., Rao N., Singh A.K., Manivasagam G. Materials Science and Engineering A WOS 9215093
72 Enhanced Biocorrosion Resistance and Cellular Response of a Dual-Phase High Entropy Alloy through Reduced Elemental Heterogeneity Perumal G., Grewal H.S., Pole M., Reddy L.V.K., Mukherjee S., Singh H., Manivasagam G., Arora H.S ACS Applied Bio Materials Scopus 25766422
73 Comparative evaluation of graphene oxide and graphene nanoplatelets as fuel additives on the combustion and emission characteristics of a diesel engine fuelled with diesel and biodiesel blend Chacko N., Jeyaseelan T Fuel Processing Technology WOS 3783820
74 Perovskite Solar Cells: A Porous Graphitic Carbon based Hole Transporter/Counter Electrode Material Extracted from an Invasive Plant Species Eichhornia Crassipes Pitchaiya S., Eswaramoorthy N., Natarajan M., Santhanam A., Asokan V., Madurai Ramakrishnan V., Rangasamy B., Sundaram S., Ravirajan P., Velauthapillai D. Scientific Reports WOS 20452322
75 Microwave heating synthesis and thermoelectric property characterization of highly dense Ca3Co4O9 bulk Raja Annamalai A., Ravi Teja P., Agrawal D.K., Muthuchamy A. Ceramics International WOS 2728842
76 Design, in silico modelling and functionality theory of folatereceptor-targeted myricetin-loaded bovine serum albumin nanoparticle formulation for cancer treatment Kunjiappan S., Govindaraj S., Parasuraman P., Sankaranarayanan M., Arunachalam S., Palanisamy P., Mohan U.P., Babkiewicz E., Maszczyk P., Vellaisamy S., Panneerselvam T. Nanotechnology WOS 13616528
77 Role of method of synthesis on the size of flakes, dispersion stability and thermophysical properties of aqua based reduced graphene oxide nanofluids Dhanapal K., Raman M., Kamatchi R., Kumaresan G. Journal of Thermal Analysis and Calorimetry WOS 15882926
78 Vibration and damping analysis of doubly curved viscoelastic-FGM sandwich shell structures using FOSDT Sahu N.K., Biswal D.K., Joseph S.V., Mohanty S.C. Structures WOS 23520124
79 Development and influence of tribomechanical properties on magnesium based hybrid metal matrix composites-a review Anand N., Senthil Kumaran S. Materials Research Express WOS 20531591
80 Characterization of Various Properties of Chemically Treated Allium sativum Fiber for Brake Pad Application V. Vineeth kumar, S. Senthil kumaran Journal of Natural Fibers WOS 1544046X
81 A review on methods to reduce weight and to increase efficiency of electric motors using lightweight materials, novel manufacturing processes, magnetic materials and cooling methods Solomon D.G., Greco A., Masselli C., Gundabattini E., Rassiah R.S., Kuppan R. Annales de Chimie: Science des Materiaux Scopus 19585934
82 A two-phase simulated annealing algorithm to minimise the completion time variance of jobs in flowshops Krishnaraj J., Thiagarajan S. International Journal of Process Management and Benchmarking Scopus 1741816X
83 Design of multifunctional compliant forceps for medical application George B L., Bharanidaran R. Australian Journal of Mechanical Engineering Scopus 14484846
84 Experimental study on modal and harmonic analysis of small wind turbine blades using NACA 63-415 aerofoil cross-section Veludurthi A., Bolleddu V. Energy Engineering: Journal of the Association of Energy Engineering Scopus 15460118
85 Heat transfer characterization of test rooms with six different roofs Joshi V.V. International Journal of Heat and Technology Scopus 3928764
86 On the optimality of inventory and shipment policies in a two-level supply chain under quadratic price dependent demand Nagaraju D., Kumar B.K., Narayanan S. International Journal of Logistics Systems and Management Scopus 17427967
87 Performance study of eco-friendly dielectric in EDM of AISI 2507 super duplex steel using Taguchifuzzy TOPSIS approach Srinivas Viswanth V., Ramanujam R., Rajyalakshmi G. International Journal of Productivity and Quality Management Scopus 17466474
88 Synthesis and machining characteristics of novel TiC ceramic and MoS2 soft particulate reinforced aluminium alloy 7075 matrix composites Dhulipalla A., Uday Kumar B., Akhil V., Zhang J., Lu Z., Park H.-Y., Jung Y.-G., Zhang J. Manufacturing Letters Scopus 22138463
89 Microstructure and mechanical properties of spark plasmasintered La2O3 dispersionstrengthened W–Ni–Fe alloy AyyappaRaj M., Yadav D., Agrawal D.K., Arunjunai Rajan R.A. Rare Metals WOS 10010521
90 Critical interpretative review on current outlook and prospects of selective catalytic reduction system for De-NOx strategy in compression ignition engine Vignesh R., Ashok B. Fuel WOS 162361
91 Experimental study on engine parameters variation in CRDI engine fuelled with palm biodiesel Naresh Kumar A., Kishore P.S., Brahma Raju K., Nanthagopal K., Ashok B. Fuel WOS 162361
92 Experimental investigation of diesel engine fuelled with different alkyl esters of Karanja oil Verma P., Dwivedi G., Behura A.K., Patel D.K., Verma T.N., Pugazhendhi A. Fuel WOS 162361
93 Investigating the microbial-influenced corrosion of UNS S32750 stainlesssteel base alloy and weld seams by biofilm-forming marine bacterium Macrococcus equipercicus Arun D., Vimala R., Devendranath Ramkumar K. Bioelectrochemistry WOS 15675394
94 Hot fissuring mitigation in arc welding of Nickelvac 23 superalloy Natesh M., Manikandan M. Journal of Manufacturing Processes WOS 15266125
95 Development of multi-pass processed AA6082/SiCp surface composite using friction stir processing and its mechanical and tribology characterization Sivanesh Prabhu M., Elaya Perumal A., Arulvel S Surface and Coatings Technology WOS 2578972
96 Theoretical and experimental studies to predict vibration responses of defects in spherical roller bearings using dimension theory Kumbhar S.G., Sudhagar P E., Desavale R.G. Measurement: Journal of the International Measurement Confederation WOS 2632241
97 Ranking of Al-CSA composite by MCDM approach using AHP–TOPSIS and MOORA methods Raju S.S., Murali G.B., Patnaik P.K. Journal of Reinforced Plastics and Composites WOS 7316844
98 Effect of inclusions on microstructure and mechanical behavior of multi-pass welded naval grade steel Venkatesh Kannan M., Arivazhagan N., Nageswara Rao M., Madhusudhan Reddy G. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications WOS 20413076
99 Study of raw and chemically treated Sansevieria ehrenbergii fibers for brake pad application Senthil Kumaran S., Srinivasan K., Ponmariappan M., Yashwhanth S., Akshay S., Hu Y.-C. Materials Research Express WOS 20531591
100 Characterization of New Cellulosic Cyrtostachys renda and Ptychosperma macarthurii Fibers from Landscaping Plants Loganathan T.M., Sultan M.T.H., Jawaid M., Ahsan Q., Naveen J., Perumal V. Journal of Natural Fibers WOS 1544046X
101 Influence of Filler Wires to Suppress the Microsegregation and to Improve Mechanical Properties of Conventional Arc-Welded Nickel-Based Superalloy Incoloy 20 Natesh M., Manikandan M. Transactions of the Indian Institute of Metals WOS 9722815
102 Study of effect of linear tip relief modification in power transmission efficiency of spur gears Thamba N.B., Tambare A.M., Ananthanarayanan K.C., Duraiswamy R.P., Thangavelu S., Easwara Pillai R.K., Mangalaraja R.V. Archives of Acoustics WOS 1375075
103 Parametric performance optimization of three sides roughened solar air heater Mohanty C.P., Behura A.K., Singh M.R., Prasad B.N., Kumar A., Dwivedi G., Verma P. Energy Sources, Part A: Recovery, Utilization and Environmental Effects WOS 15567230
104 Investigations on Bending Characteristics of Soft Mesh Structure using Shape Memory Alloy Spring Towards Bio-Inspired Robotic Applications Muralidharan M., Brolin A., Mithun R., Patil R., Palani I.A. Iranian Journal of Science and Technology - Transactions of Mechanical Engineering WOS 22286187
105 Effect-cause analysis and prediction convergence of random failure gate in a probabilistic competitive environment with case study on quality control process Choorikkat S., Gajjele R., Srinivas M.N., Murty A.V.S. Mathematical Modelling of Engineering Problems Scopus 23690747
106 A multi-level colour thresholding based segmentation approach for improved identification of the defective region in leather surfaces Praveen Kumar M., Denis Ashok S Engineering Journal Scopus 1258281
107 Different types of vegetable oils and their effect on surface roughness and cutting forces in machining operations Anand N., Senthil Kumaran S. Journal of Critical Reviews Scopus 23945125
108 Experimental Assessment of Effects of n-Butanol on Performance, Emission, and Combustion Characteristics of Mahua Oil Fueled Reactivity Controlled Compression Ignition (RCCI) Engine Ganesan N., Masimalai S., Ekambaram P., Selvaraju K. Emission Control Science and Technology Scopus 21993629
109 Influence of spent air confinement on pressure distribution over a flat plate impinged by an array of jets Patil N.G., Mujawar M.A., Biradar S.A., Adimurthy M., Katti V.V. International Journal of Ambient Energy Scopus 1430750
110 A review on life increment of tapered roller bearings Senthil Kumaran S., Srinivasan K., Velmurugan P., John Rajan A. Journal of Critical Reviews Scopus 23945125
111 High temperature dry sliding wear behaviour of laser powder bed fused Inconel 718 Calvin Samuel. S., Arivarasu M., Ram Prabhu T. Additive Manufacturing WOS 22148604
112 Comparative studies on the hot corrosion behavior of air plasma spray and high velocity oxygen fuel coated Co-based L605 superalloys in a gas turbine environment Jithesh K., Arivarasu M. International Journal of Minerals, Metallurgy and Materials WOS 16744799
113 Optimization of alkali-catalyzed transesterification of rubber oil for biodiesel production & its impact on engine performance Vishal D., Dubey S., Goyal R., Dwivedi G., Baredar P., Chhabra M. Renewable Energy WOS  
114 Study of diesel fuel multiple injection characteristics using shadow-graphic imaging technique with CRDI system in constant volume chamber Avinash G.R.S., Kavitha C., Ashok B., Vignesh R., Venkat V., Karthickeyan V. Fuel WOS  
115 Multi-functional fuel additive as a combustion catalyst for diesel and biodiesel in CI engine characteristics Ashok B., Nanthagopal K., Chyuan O.H., Le P.T.K., khanolkar K., Raje N., Raj A., Karthickeyan V., Tamilvanan A Fuel WOS  
116 An interdisciplinary review on calibration strategies of engine management system for diverse alternative fue Jacob A., Ashok B. Fuel WOS  
117 Role of impinging powder particles on melt pool hydrodynamics, thermal behaviour and microstructure in laser-assisted DED process: A particle-scale DEM – CFD – CA approach Aggarwal A., Chouhan A., Patel S., Yadav D.K., Kumar A., Vinod A.R., Prashanth K.G., Gurao N.P. International Journal of Heat and Mass Transfer WOS  
118 Investigation on the effect of injection schedule and EGR in hydrogen energy share using common rail direct injection dual fuel engine Sathishkumar S., Ibrahim M.M. International Journal of Hydrogen Energy WOS  
119 Cost-oriented robotic assembly line balancing problem with setup times: multi-objective algorithms Li Z., Janardhanan M.N., Ponnambalam S.G. Journal of Intelligent Manufacturing WOS  
120 Exploring grinding and burnishing as surface post-treatment options for electron beam additive manufactured Alloy 718 Karthick Raaj R., Vijay Anirudh P., Karunakaran C., Kannan C., Jahagirdar A., Joshi S., Balan A.S.S. Surface and Coatings Technology WOS  
121 Superhydrophilic nanostructured surfaces of beta Ti[sbnd]29Nb alloy for cardiovascular stent applications Vishnu J., Calin M., Pilz S., Gebert A., Kaczmarek B., Michalska-Sionkowska M., Hoffmann V., Manivasagam G. Surface and Coatings Technology WOS  
122 Interfacing green synthesized flake like-ZnO with TiO2 for bilayer electron extraction in perovskite solar cells Pitchaiya S., Eswaramoorthy N., Natarajan M., Santhanam A., Ramakrishnan V.M., Asokan V., Palanichamy P., Palanisamy B., Kalimuthu A., Velauthapillai D. New Journal of Chemistry WOS  
123 Comparison of metallurgical and mechanical properties of dissimilar joint of AISI 316 and Monel 400 developed by pulsed and constant current gas tungsten arc welding processes Yelamasetti B., G R., G V.R., B S.B., Vemanaboina H. International Journal of Advanced Manufacturing Technology WOS  
124 Enhancement of the hardness and wear-resistance of aluminum-silicon alloy using atmospheric plasma-sprayed ZrO2, Al2O3-ZrO2 multilayer, and Al2O3/ZrO2 composite coatings Mohamed Abbas S., Elayaperumal A., Arulvel S. Surface Topography: Metrology and Properties WOS  
125 Tribological characterization of graphene nanoplatelets/alumina particles filled epoxy hybrid nanocomposites Kesavulu A., Mohanty A. Journal of Applied Polymer Science WOS  
126 Utilization of plant-derived Myricetin molecule coupled with ultrasound for the synthesis of gold nanoparticles against breast cancer Mohan U.P., Sriram B., Panneerselvam T., Devaraj S., MubarakAli D., Parasuraman P., Palanisamy P., Premanand A., Arunachalam S., Kunjiappan S. Naunyn-Schmiedeberg's Archives of Pharmacology WOS  
127 First case of student suicide in India due to the COVID-19 education crisis: A brief report and preventive measures Lathabhavan R., Griffiths M. Asian Journal of Psychiatry WOS  
128 Performance of fiber metal laminate composites embedded with AL and CU wire mesh Krishnasamy P., Rajamurugan G., Thirumurugan M. Journal of Industrial Textiles WOS  
129 Turbulence characteristics of high Reynolds number flow inside a three-dimensional cubic lid-driven cavity Samantaray D., Das M.K., Patel D.K. European Journal of Mechanics, B/Fluids WOS  
130 A case study focusing on investigating the tribological performance of Cu-Sn sintered brake pad of off-high road vehicles Kumar V.V., Kumaran S.S., Dhanalakshmi S. Journal of Composite Materials WOS  
131 Damage Identification in Hemp Fiber (Cannabis sativa) Reinforced Composite Plates Using MAC and COMAC Correlation Methods: Experimental Study Patil S., Mallikarjuna Reddy D. Journal of Natural Fibers WOS  
132 Static and dynamic performance characteristics of powder lubricated symmetrical three-lobed bearing Jose J., Behera N. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology WOS  
133 Numerical and experimental study of the laminar separation bubble over SS007 airfoil for micro aerial vehicles Somashekar V., Selwyn Raj I. Aircraft Engineering and Aerospace Technology WOS  
134 Experimental investigation on the filtration characteristics of a commercial diesel filter operated with raw and processed karanja-diesel blends Vora R., Kadam V., Thangaraja J. Sadhana - Academy Proceedings in Engineering Sciences WOS  
135 Taguchi Grey Relational Approach for Optimizing Process Parameters of Laser Peening on Titanium Alloy to Induce Enhanced Compressive Stress based on Finite Element Simulation Ranjith Kumar G., Rajyalakshmi G. Journal of Advanced Manufacturing Systems Scopus  
136 Development and analysis of FRP based composite fibre Wilson V.H., Agrawal A., Wadhwa A., Chawla S International Journal of Advanced Research in Engineering and Technology Scopus  
137 Ranking of supplier performance using machine learning algorithm of random forest Wilson V.H., Prasad A.N.S., Shankharan A., Kapoor S., Rajan J.A. International Journal of Advanced Research in Engineering and Technology Scopus  
138 Improving the energy performances of the refrigeration systems with subcooling using the eco-friendly refrigerant R600A: Initial experimental results Gundabattini E., Masselli C., Gnanaraj D.S., Tadikonda S., Karnati V., Vemireddy V.K. Instrumentation Mesure Metrologie Scopus  
139 Effect of Nanoclay on the Heat Affected Zone during Pulsed Laser Machining of Polymer Based Hybrid Nano-Composites Nammi S., Choutapalli S.H., Patnana R., Vasa N.J. Lasers in Manufacturing and Materials Processing Scopus  
140 Dynamic Analysis of a Turbocharger Rotor-Bearing System in Transient Operating Regimes Mutra R.R., Srinivas J. Journal of The Institution of Engineers (India): Series C Scopus  
141 Countering tropical cyclonic storm impacts on low-rise houses Ghosh S., Rajasekeran K.S., Joseph Vitus B., Aswin Srikanth S., Mohandas S., Ganesh Monikantan A., Kulin Contractor S. Smart and Sustainable Built Environment Scopus  
142 Supply Chain Routing in a Diary Industry Using Heterogeneous Fleet System: Simulation-Based Approach Ravichandran M., Naresh R., Kandasamy J. Journal of The Institution of Engineers (India): Series C Scopus  
143 Threshold algorithm for the cell formation problem Raguraman T.R., Sudhakara Pandian R., Kamalakannan R. International Journal of Advanced Intelligence Paradigms Scopus  
144 Prediction of tensile strength behavior of AA2024 reinforced with CNT in the combination of FSW+FSP Senthil Kumaran S., Vasanth Ravin V., Krishnamurthy D.K. Journal of Critical Reviews Scopus  
145 Sustainable performance of cargo bikes to improve the delivery time using traffic simulation model Ben Rajesh P., John Rajan A. FME Transactions Scopus  
146 Effect on stress and thermal analysis of tapered roller bearings Senthil Kumaran S., Velmurugan P., Tilahun S. Journal of Critical Reviews Scopus  
147 Investigation on the effect of injection schedule and EGR in hydrogen energy
share using common rail direct injection dual fuel engine
Sathishkumar S., Ibrahim M.M. International Journal of Hydrogen Energy    
148 Cost-oriented robotic assembly line balancing problem with setup times:
multi-objective algorithms
Li Z., Janardhanan M.N., Ponnambalam S.G. Journal of Intelligent Manufacturing    
149 Crosslinking of gum-based composite scaffolds for enhanced strength and stability: A comparative study between
sodium trimetaphosphate and glutaraldehyde
Joglekar M.M., Ghosh D., Anandan D., Yatham P., Jayant R.D.,
Nambiraj N.A., Jaiswal A.K.
Journal of Biomedical Materials Research - Part B Applied Biomaterials    
150 Enhancement of the hardness and wear-resistance of aluminum-silicon alloy using atmospheric plasma- sprayed ZrO2, Al2O3-ZrO2 multilayer,
and Al2O3/ZrO2 composite coatings
Mohamed Abbas S., Elayaperumal A., Arulvel S. Surface Topography: Metrology and Properties    
151 Thermochemical conversion of Parthenium hysterophorus biomass for bio-oil synthesis: kinetics and techno-
economic analysis
Ramesh N., Somasundaram M. Biomass Conversion and Biorefinery    
152 Tribological characterization of graphene nanoplatelets/alumina particles filled epoxy hybrid
nanocomposites
Kesavulu A., Mohanty A. Journal of Applied Polymer Science    
153 Utilization of plant-derived Myricetin molecule coupled with ultrasound for the synthesis of gold nanoparticles against breast cancer Mohan U.P., Sriram B., Panneerselvam T., Devaraj S., MubarakAli D., Parasuraman P., Palanisamy P., Premanand A.,
Arunachalam S., Kunjiappan S.
Naunyn-Schmiedeberg's Archives of Pharmacology    
154 First case of student suicide in India due to the COVID-19 education crisis:
A brief report and preventive measures
Lathabhavan R., Griffiths M. Asian Journal of Psychiatry    
155 Turbulence characteristics of high Reynolds number flow inside a three-
dimensional cubic lid-driven cavity
Samantaray D., Das M.K., Patel D.K. European Journal of Mechanics, B/Fluids    
156 A case study focusing on investigating the tribological performance of Cu-Sn sintered brake pad of off-high road
vehicles
Kumar V.V., Kumaran S.S., Dhanalakshmi S. Journal of Composite Materials    
157 Damage Identification in Hemp Fiber (Cannabis sativa) Reinforced Composite Plates Using MAC and
COMAC Correlation Methods: Experimental Study
Patil S., Mallikarjuna Reddy D. Journal of Natural Fibers    
158 Static and dynamic performance characteristics of powder lubricated symmetrical three-lobed bearing Jose J., Behera N. Proceedings of the Institution of Mechanical Engineers, Part J:
Journal of Engineering Tribology
   
159 Numerical and experimental study of
the laminar separation bubble over SS007 airfoil for micro aerial vehicles
Somashekar V., Selwyn Raj I. Aircraft Engineering and Aerospace Technology    
160 Experimental investigation on the filtration characteristics of a commercial diesel filter operated with raw and processed karanja-diesel
blends
Vora R., Kadam V., Thangaraja J. Sadhana - Academy Proceedings in Engineering Sciences    
161 Comprehending the Unfolded Protein Response as a Conduit for Improved
Mesenchymal Stem Cell-Based Therapeutics
Mullick M., Nayak S. Regenerative Engineering and Translational Medicine    
162 Taguchi Grey Relational Approach for Optimizing Process Parameters of Laser Peening on Titanium Alloy to Induce Enhanced Compressive Stress
based on Finite Element Simulation
Ranjith Kumar G., Rajyalakshmi G. Journal of Advanced Manufacturing Systems    
163 Development and analysis of FRP based composite fibre Wilson V.H., Agrawal A., Wadhwa A., Chawla S. International Journal of Advanced Research in Engineering and
Technology
   
164 Ranking of supplier performance using machine learning algorithm of random forest Wilson V.H., Prasad A.N.S., Shankharan A., Kapoor S., Rajan J.A. International Journal of Advanced Research in Engineering and
Technology
   
165 Dynamic Analysis of a Turbocharger Rotor-Bearing System in Transient
Operating Regimes
Mutra R.R., Srinivas J. Journal of The Institution of Engineers (India):
Series C
   
166 Countering tropical cyclonic storm impacts on low-rise houses Ghosh S., Rajasekeran K.S., Joseph Vitus B., Aswin Srikanth S., Mohandas S., Ganesh Monikantan A., Kulin
Contractor S.
Smart and Sustainable Built Environment    
167 Sustainable performance of cargo bikes to improve the delivery time
using traffic simulation model
Ben Rajesh P., John Rajan A. FME Transactions    
168 Calibration of idling characteristics for Lemon Peel Oil using Central Composite
Design in light commercial vehicle diesel engine
Ashok B., Jeevanantham A.K., Bhat Hire K.R., Kashyap V., Saiteja P. Energy Conversion and Management    
169 Enhancing the adaptability: Lean and green strategy towards the Industry Revolution 4.0 Leong W.D., Teng S.Y.,
How B.S., Ngan S.L.,
Rahman A.A., Tan C.P.,
Ponnambalam S.G., Lam H.L.
Journal of Cleaner Production    
170 Microscopic characteristics of biodiesel – Graphene oxide nanoparticle blends and their Utilisation in a compression ignition
engine
Nagaraja S., Dsilva Winfred Rufuss D., Hossain A.K. Renewable Energy    
171 An experimental study to analyze influence of porous media combustor on performance and emission characteristics
of a DI diesel engine
Saravanan S., Chidambaram R.K., Geo V.E. Fuel    
172 Comprehensive study of engine characteristics of novel biodiesel from curry leaf (Murraya koenigii) oil in ceramic
layered diesel engine
Viswanathan K., Ashok B., Pugazhendhi A. Fuel    
173 Role of thermal barrier coating and porous
medium combustor for a diesel engine: An experimental study
Saravanan S., Ramesh
Kumar C., Pugazhendhi A., Brindhadevi K.
Fuel    
174 Fabrication techniques of biomimetic
scaffolds in three-dimensional cell culture: A review
Badekila A.K., Kini S., Jaiswal A.K. Journal of Cellular Physiology    
175 Effect of hybrid multi-walled carbon nanotube and montmorillonite nanoclay
content on mechanical properties of shape memory epoxy nanocomposite
Mat Yazik M.H., Sultan M.T.H., Mazlan N., Abu
Talib A.R., Naveen J., Shah A.U.M., Safri S.N.A.
Journal of Materials Research and Technology    
176 Thermal and cost assessment of various polymer-dispersed liquid crystal film smart
windows for energy efficient buildings
Shaik S., Gorantla K., Venkata Ramana M.,
Mishra S., Kulkarni K.S.
Construction and Building Materials    
177 Investigations on the Mechanical properties of glass fiber/sisal fiber/chitosan reinforced hybrid polymer sandwich composite scaffolds for bone fracture fixation
applications
Arumugam S., Kandasamy J., Md Shah A.U., Sultan M.T.H., Safri S.N.A., Majid
M.S.A., Basri A.A.,
Mustapha F.
Polymers    
178 Novel residual stress measurement
technique to evaluate through thickness residual stress fields
Taraphdar P.K., Thakare
J.G., Pandey C., Mahapatra M.M.
Materials Letters    
179 Sensor-assisted assessment of the tribological behavior patterns of AA7075 hybrid MMC reinforced with multi-wall
carbon nanotubes and pulverized fuel ash
Selvaraj S.K., Srinivasan K., Ramesh Kumar S., Hu Y.-C. Materials    
180 Investigation on thermodynamic performance analysis and environmental effects of various new refrigerants used in
air conditioners
Shaik S.V., Shaik S., Gorantla K., Mahapatra D., Setty A.B.T.P. Environmental Science and Pollution Research    
181 Experimental investigation and optimization of micro-drilling parameters on Inconel 800
superalloy
Venkatesan K., Devendiran S., Bhupatiraju S.C.S.R.,
Kolluru S., Pavan Kumar C.
Materials and Manufacturing Processes    
182 Methane production from anaerobic mono- and co-digestion of kitchen waste and sewage sludge: synergy study on cumulative methane production and
biodegradability
Varsha S.S.V., Soomro A.F., Baig Z.T.,
Vuppaladadiyam A.K., Murugavelh S., Antunes E.
Biomass Conversion and Biorefinery    
183 Electrochemical Detections of Tea Polyphenols: A Review Saikrithika S., Senthil Kumar A. Electroanalysis    
184 Features of the biochemistry of Mycobacterium smegmatis, as a possible
model for Mycobacterium tuberculosis
T J.A.S., J R., Rajan A.,
Shankar V.
Journal of Infection and Public Health    
185 Dynamic buckling of classical/non-classical curved beams by nonlocal nonlinear finite element accounting for size dependent effect and using higher-order shear flexible
model
Sarthak D., Prateek G., Vasudevan R., Polit O., Ganapathi M. International Journal of Non-Linear Mechanics    
186 Nonlinear supersonic flutter study of porous 2D curved panels including
graphene platelets reinforcement effect
Ganapathi M., Aditya S., Shubhendu S., Polit O.,
Zineb T.B.
International Journal of Non-Linear Mechanics    
187 Experimental and finite element vibration analysis of CNT reinforced MR elastomer
sandwich beam
Selvaraj R., Ramamoorthy M. Mechanics Based Design of Structures and Machines    
188 Statistical analysis and investigation of tensile test data of coir composites reinforced with graphene, epoxy and carbon fibre Kuclourya T., Jain M.K., Mudliar S., Thamba N.B. Proceedings of the Institution of Mechanical Engineers, Part L: Journal
of Materials: Design and Applications
   
189 Drilling and mechanical performance
analysis on flax-sisal hybrid composite embedded with perforated aluminum foil
Rajamurugan G., Sanjay
A.P., Krishnasamy P., Muralidharan B., Jain S.
Journal of Reinforced Plastics and Composites    
190 Particulate-Reinforced Tungsten Heavy Alloy/Yttria-Stabilized Zirconia Composites Sintered Through Spark Plasma Sintering Muthuchamy A., Boggupalli L.P., Yadav D.R., Naveen Kumar N., Agrawal D.K.,
Raja Annamalai A.
Arabian Journal for Science and Engineering    
191 Non-Newtonian and non-isothermal numerical modelling of a twin screw hydrogen extruder with slip imposed
boundary condition on the screw surface
Ravi Kumar P.S., Arumugam S.K. Fusion Engineering and Design    
192 Thermal transport properties of carbon- assisted phase change nanocomposite Kim S.C., Prabakaran R., Sakthivadivel D., Thangapandian N., Bhatia
A., Ganesh Kumar P.
Fullerenes Nanotubes and Carbon Nanostructures    
193 Optimization of electroless bath process parameter for improving the tribology behavior of Ni-P/CaBr2composite coating against the hardened EN-31 steel Premkumar A., Elayaperumal A., Arulvel S., Jagatheeshwaran M.S., Ramesh B., Sivanesh
Prabhu M.
Surface Topography: Metrology and Properties    
194 Significance of tribolayer on the friction and wear resistance of FSPed AA6082/SiCpcomposite at various load
conditions
Sivanesh Prabhu M., Elayaperumal A., Arulvel S., Wasim Khan M. Surface Topography: Metrology and Properties    
195 A Case Study on Assessing Cumulonimbus Induced Flight Vulnerabilities Over the Nepalese
Himalayan Terrain
Chandra A., Ghosh S., Doshi N., Deshpande S., Gumber S. Pure and Applied Geophysics    
196 Modal analysis of cylindrical panels at elevated temperatures under nonuniform heating conditions: Experimental investigation Twinkle C.M., Nithun C., Pitchaimani J., Rajamohan V. Proceedings of the Institution of Mechanical Engineers, Part C: Journal
of Mechanical Engineering Science
   
197 Tribological behavior of dental restorative composites in chewable tobacco environment Suryawanshi A.S., Behera N. Proceedings of the Institution of Mechanical Engineers, Part H: Journal
of Engineering in Medicine
   
198 Effect of pilot and post fueling on the combustion and emission characteristics of Chacko N., J T. Energy Sources, Part A: Recovery, Utilization and    
199 Influence of fatty acid composition on process optimization and characteristics assessment of biodiesel produced from waste animal fat Srinivasan G.R., Shankar V., Chandra Sekharan S., Munir M., Balakrishnan D.,
Mohanam A., Jambulingam R.
Energy Sources, Part A: Recovery, Utilization and Environmental Effects    
200 Convective heat transfer and laminar flow characteristics of flow over a circular
cylinder in presence of control plates
Hemanth A.V.S.S., Malaikannan G.,
Deepakkumar R.
Fluid Dynamics Research    
201 An alternative numerical model for investigating three-dimensional steam Sadasivan S., Arumugam S.K., Aggarwal M.C. Journal of Applied Fluid Mechanics    
202 Selective laser melting of nanostructured Al-Y-Ni-Co alloy Wang Z., Scudino S., Eckert J., Prashanth K.G. Manufacturing Letters    
203 Antimicrobial activity of chemical, thermal and green route-derived zinc oxide
nanoparticles: A comparative analysis
Kasahun M., Yadate A., Belay A., Belay Z.,
Ramalingam M.
Nano Biomedicine and Engineering    
204 Theoretical prediction of thermo-physical properties of beef tallow based biodiesel Srinivasan G.R., Jambulingam R. FME Transactions    
205 A comparative study on the performances of flat plate and evacuated tube collectors deployable in domestic solar water heating
systems in different climate areas
Greco A., Gundabattini E., Gnanaraj D.S., Masselli C. Climate    
206 2D dynamic spindle radial error motion
analysis using fourier series in polar domain
Chellappan K., Sathiaseelan D.A. Instrumentation Mesure Metrologie    
207 An experimental investigation on regulated and unregulated emissions of a gasohol fueled SI engine with a novel three way
catalytic converter
Sharma Gunasekaran S., Manivannan S., Ramakrishnan P. Journal Europeen des Systemes Automatises    
208 A review on characteristics of cold sprayed coatings Srikanth A., Bolleddu V. Australian Journal of Mechanical Engineering    
209 Study of shock wave-boundary layer
interaction using high-speed Schlieren imaging
Murugan J.N., Govardhan R.N. Journal of Flow
Visualization and Image Processing
   
210 Investigating the relationship between age
and smart phone usage patterns: Evidences from indian smart phone users
Sakkthivel A.M.,
Moovendhan V., Heggde G.S.
International Journal of Business Excellence    
211 Design and testing of a compliant mechanism-based XYθ stage for
micro/nanopositioning
SP B., Bharanidaran R. Australian Journal of Mechanical Engineering    
212 Optimization of process parameters in CNC milling of P20 steel by cryo-treated
tungsten carbide tools using NSGA-II
Mukkoti V.V., Mohanty C.P., Gandla S., Sarkar P.,
P S.R., B D.
Production and Manufacturing Research    
213 Modelling and analysis of flow of powders through long pipelines J.S S., Behera N. World Journal of Engineering    
214 Comparative analysis of process parameters in wear properties of coated and uncoated tool inserts during machining
of hastelloy C-276
Kiran B., Nagaraju D. FME Transactions    
215 Structural and thermal analysis of butt joint GTAW of similar and dissimilar materials
with distinct groove angles through simulation and mathematical modelling
Kiran B., Mishra K., Singh Y.R., Nagaraju D. FME Transactions    
216 Microstructure, mechanical properties and machinability studies of Al7075/SiC/h-BN hybrid nanocomposite fabricated via
ultrasonic-assisted squeeze casting
Soni S.K., Thomas B. FME Transactions    
217 An experimental investigation of thrust force, delamination and surface roughness
in drilling of jute/carbon hybrid composites
Margabandu S., Subramaniam S. World Journal of Engineering    
218 An experimental investigation and modelling for travelling wire
electrochemical machining of Monel 400 alloys
Kalaimathi M., Venkatachalam G., Sivakumar M. International Journal of Manufacturing Technology and Management    
219 SOME STUDY on FATIGUE LIFE of OPEN COIL SUSPENSION SPRINGS Tilahun S., Velmurugan P., Senthil Kumaran S. Journal of Critical Reviews    
220 South India projected to be susceptible to high future groundnut failure rates for future climate change and geo-
engineered scenarios
Yang H., Dobbie S., Ramirez-Villegas J., Chen B., Qiu S., Ghosh
S., Challinor A.
Science of the Total Environment    
221 Analysing the risks of adopting circular
economy initiatives in manufacturing supply chains
Ethirajan M., Arasu M T.,
Kandasamy J., K.E.K V., Nadeem S.P., Kumar A.
Business Strategy and the Environment    
222 Prediction of behavior of triangular solar air heater duct using V-down rib with multiple gaps and turbulence promoters as artificial roughness: A
CFD analysis
Misra R., Singh J., Jain S.K., Faujdar S., Agrawal M., Mishra A., Goyal P.K. International Journal of Heat and Mass Transfer    
223 Role of magnetic field and cavity inclination on double diffusive mixed
convection in rectangular enclosed domain
Moolya S., Satheesh A. International Communications in Heat and Mass Transfer    
224 Effect of selective laser melting process parameters on microstructural and mechanical properties of TiC–NiCr
cermet
Aramian A., Sadeghian Z., Razavi S.M.J., Prashanth K.G., Berto F. Ceramics International    
225 An integrated approach of Adaptive Neuro-Fuzzy Inference System and dimension theory for diagnosis of
rolling element bearing
Kumbhar S.G., Sudhagar P E. Measurement: Journal of the International Measurement
Confederation
   
226 Electron-beam welding of high-entropy alloy and stainless steel: microstructure and mechanical properties Sokkalingam R., Mastanaiah P., Muthupandi V., Sivaprasad K., Prashanth K.G. Materials and Manufacturing Processes    
227 A Comprehensive Review on CNTs and CNT-Reinforced Composites: Syntheses, Characteristics and
Applications
Soni S.K., Thomas B., Kar V.R. Materials Today Communications    
228 Micro Cellulose Grewia Optiva Fiber- reinforced Polymer Composites:
Relationship between Structural and Mechanical Properties
Karakoti A., Aseer J.R., Dasan P.K., Rajesh M. Journal of Natural Fibers    
229 Non-isothermal conversion of wheat husk and low-density polyethylene for energy dense fuel production Rajkumar P., Somasundaram M. Biomass Conversion and Biorefinery    
230 Experimental investigation of substrate board orientation effect on the optimal distribution of IC chips under forced
convection
Mathew V.K., Hotta T.K. Experimental Heat Transfer    
231 Frictional wear and corrosion behavior of AlCoCrFeNi high-entropy alloy
coatings synthesized by atmospheric plasma spraying
Mu Y., Zhang L., Xu L., Prashanth K., Zhang N.,
Ma X., Jia Y., Xu Y., Jia Y., Wang G.
Entropy    
232 Effect of reformulated fuel strategy on compression ignition engine compatibility using antioxidant additive
and clean Karanja methyl ester
Dandu M.S.R., Kasianantham N. Clean Technologies and Environmental Policy    
233 Spark plasma sintering and characterization of Al-TiB2 composites Annamalai A.R., Srikanth M., Muthuchamy A., Acharya S., Khisti A.,
Agrawal D.K., Jen C.-P.
Metals    
234 Mechanical behaviour and microscopic analysis of epoxy and E-glass reinforced banyan fibre composites with the application of artificial neural
network and deep neural network for the automatic prediction of orientation
Shyam S., Kaul S., Kalsara N., Babu T.N. Journal of Composite Materials    
235 Development of Pulsed Current Arc Welding to Preclude Carbide
Precipitates in Hastelloy X Weldment Using ERNiCr-3
Sathishkumar M., Manikandan M. Journal of Materials Engineering and Performance    
236 A Comparative Study of Structural Changes in Conventional and Unconventional Machining and Mechanical Properties Evaluation of Polypropylene Based Self Reinforced
Composites
Deepa A., Kuppan P., Krishnan P. Science and Engineering of Composite Materials    
237 Prediction based traffic management in a metropolitan area Chavhan S., Venkataram P. Journal of Traffic and Transportation Engineering (English Edition)    
238 Impact of polymeric changes on mechanical and structural properties of polyethylene self reinforced polymer composites Deepa A., Kuppan P., Padmanabhan K. UPB Scientific Bulletin, Series D: Mechanical Engineering    
239 Experimental Analysis and Energy Balance on Thermal Barrier-Coated Piston Diesel Engine Using Biodiesel Gangula V.R., Nandhana Gopal G.R., Tarigonda H. Journal of The Institution of Engineers (India): Series C    
240 Matrix-based tolerance analysis for multi-component selective assembly with geometric and dimensional features using genetic algorithm Jeevanantham A.K., Chaitanya S.V., Ananthanarayanan R. International Journal of Productivity and Quality Management    
241 Effect of FDM process parameters on mechanical properties of 3D-printed carbon fibre–PLA composite Kamaal M., Anas M., Rastogi H., Bhardwaj N., Rahaman A. Progress in Additive Manufacturing    
242 Experimental study on structural parameters of wire arc additive manufacturing on nickel based alloy
using argon arc welding
Kiran B., Rajyalakshmi G. UPB Scientific Bulletin, Series D: Mechanical Engineering    
243 An overview of dynamic modeling of rolling-element bearings Kumbhar S.G., Sudhagar P E., Desavale R.G. Noise and Vibration Worldwide    
244 Scratch resistance of high velocity oxy-
fuel sprayed wc-20% co coatings reinforced with carbon nanotubes
Mohammed Thalib
Basha G., Venkateshwarlu B.
Journal of Surface Science and Technology    
245 Investigation on tensile strength of cellulose microfibril reinforced polymer
composites
Pragasam V., Reddy D.M. Cellulose Chemistry and Technology    
246 Case Studies on the Applications of Phenolic Resin-Based Composite Materials for Developing Eco-Friendly Brake Pads Praveenkumar B., Darius Gnanaraj S. Journal of The Institution of Engineers (India): Series D    
247 Robotic manipulator trajectory
optimisation using an improved modified bat algorithm
Sahu P.K., Balamurali G., Biswal B.B. International Journal of
Mechatronics and Automation
   
248 Compressive strength evaluation of nanodiamond/ mwcnt/graphene reinforced novel hybrid polymer nano composites Singh B., Mohanty A. Journal of Surface Science and Technology    
249 Selective laser manufacturing of Ti- based alloys and composites: impact of process parameters, application trends, and future prospects Singh N., Hameed P., Ummethala R., Manivasagam G., Prashanth K.G., Eckert
J.
Materials Today Advances    
250 Evaluation of small wind turbine blades with uni-vinyl foam alignments using static structural analysis Veludurthi A., Bolleddu V. Energy Engineering: Journal of the
Association of Energy Engineering
   
251 An optimal approach for improving the machinability of Nimonic C-263 superalloy during cryogenic assisted
turning
Jadhav P.S., Mohanty C.P., Hotta T.K., Gupta M. Journal of Manufacturing Processes    
252 Microstructure and properties of
nano-SiO2 activated flux TIG (A-TIG) welding of Incoloy 925 joints
Sujai S., Devendranath Ramkumar K. Journal of
Manufacturing Processes
   
253 Nonlocal strain gradient finite element analysis of nanobeams
using two-variable trigonometric shear deformation theory
Merzouki T., Houari M.S.A., Haboussi M.,
Bessaim A., Ganapathi M.
Engineering with Computers    
254 Sliding mode controller-based voltage source inverter for power
quality improvement in microgrid
Rajakumar V., Anbukumar K.,
Immanuel Selwynraj A.
IET Renewable Power Generation    
255 High index facets-Ag nanoflower enabled efficient electrochemical detection of lead in blood serum and
cosmetics
Swetha P., Chen J., Kumar A.S., Feng S.-P. Journal of Electroanalytical Chemistry    
256 Sensible desalting: Investigation of sensible thermal storage materials in solar stills Arunkumar T., Wang J., Dsilva Winfred Rufuss D., Denkenberger D.,
Kabeel A.E.
Journal of Energy Storage    
257 Next-Generation Smart Electric Vehicles Cyber Physical System for Charging Slots Booking in Charging Stations Chavhan S., Dubey N., Lal A., Khetan D., Gupta D., Khanna A., Rodrigues J.J.P.C.,
Pinheiro P.R.
IEEE Access    
258 Privacy and Security Management in Intelligent Transportation System Chavhan S., Gupta D., Garg S., Khanna A., Choi B.J., Shamim Hossain
M.
IEEE Access    
259 Design and analysis of metal hydride reactor embedded with internal copper fins and external water
cooling
Gupta S., Sharma V.K. International Journal of Energy Research    
260 Estimation of residual stress in air
plasma sprayed MWCNT-reinforced 8YSZ–alumina composite coating
Thakare J.G., Mulik R.S., Mahapatra M.M. Archives of Civil and
Mechanical Engineering
   
261 Effect of diethyl ether and ethanol as an oxygenated additive on Calophyllum inophyllum biodiesel in CI engine Tamilvanan A., Balamurugan K., Ashok B., Selvakumar P., Dhamotharan S., Bharathiraja M.,
Karthickeyan V.
Environmental Science and Pollution Research    
262 Effect of oil palm leaf-based carbon quantum dot on nematic liquid
crystal and its electro-optical effects
Rastogi A., Hegde G., Manohar T., Manohar
R.
Liquid Crystals    
263 A review of particulate-reinforced aluminum matrix composites fabricated by selective laser melting WANG P., ECKERT J., PRASHANTH K.-G., WU M.-W., KABAN I., XI L.-
X., SCUDINO S.
Transactions of Nonferrous Metals Society of China
(English Edition)
   
264 Impact damage assessment in carbon fiber reinforced composite using vibration-based new damage index and ultrasonic C-scanning
method
Patil S., Mallikarjuna Reddy D. Structures    
265 Comparative assessment of biogas and producer gas with diesel in a twin cylinder dual-fuel diesel engine Nayak C., Sahoo B.B. Journal of the Brazilian Society of Mechanical
Sciences and Engineering
   
266 Experimental investigation on photothermal conversion using solar glycol/MWCNTs based nanofluids Ganesh Kumar P., Vigneswaran V.S., Sakthivadivel D., Meikandan M. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical
Engineering
   
267 Multi-wall carbon nanotubes coating on a copper substrate using airbrush spray coating Meikandan M., Ganesh Kumar P., Sakthivadivel D., Vigneswaran V.S., Malar Mohan K. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical
Engineering
   
268 Automating smart Internet of Things
devices in modern homes using context-based fuzzy logic
Ming C., Kadry S., Dasel A.A. Computational Intelligence    
269 COMPARISON of HOT CORROSION PERFORMANCE of BARE and NiCoCrAlY-COATED AUSTENITIC STAINLESS STEEL AISI 347 in AGGRESSIVE WASTE HEAT
INCINERATOR ENVIRONMENT at 650 aC
Muthu S.M., Anant R.V., Raghul D., Ishwarya M., Arivazhagan N., Arivarasu M. Surface Review and Letters    
270 Fault analysis of worm gear box using symlets wavelet THAMBA N.B., VENKATA K.K.T., NUTAKKI S., DURAISWAMY R.P., MOHAMMED N., WAHAB R.S., MANGALARAJA R.V.,
MANIVANNAN A.V.
Archives of Acoustics    
271 Dental pulp stem cells in neuroregeneration Mohan S.P., Ramalingam M. Journal of Pharmacy and Bioallied Sciences    
272 Exosomes in the oral and maxillofacial region Lakshmi J.S.J., Nallusamy J., Manivasagam G.,
Ramalingam M., Sunil P.M., Tom A.
Journal of Pharmacy and Bioallied Sciences    
273 A novel method to estimate the damage severity using spatial
wavelets and local regularity algorithm
Arun Kumar K., Mallikarjuna Reddy D. Frattura ed Integrita Strutturale    
274 Application of artificial immune system algorithm for simultaneous minimisation of multiple objectives
in single row facility layout problems
Nagarajan L., Mahalingam S.K., Kandasamy J., Gurusamy S. International Journal of Industrial and Systems Engineering    
275 Vitamin B12-Immobilized Graphene Oxide for Efficient Electrocatalytic Carbon Dioxide Reduction Reaction Saravanan N., Balamurugan M., Shalini Devi K.S., Nam K.T.,
Senthil Kumar A.
ChemSusChem    
276 Decanol proportional effect prediction model as additive in palm biodiesel using ANN and RSM technique for diesel engine Kumar A.N., Kishore P.S., Raju K.B., Ashok B., Vignesh R., Jeevanantham A.K., Nanthagopal K.,
Tamilvanan A.
Energy    
277 Vibration analysis of a multifunctional hybrid composite honeycomb sandwich plate Praveen A P., Rajamohan V., Arumugam A.B.,
Mathew A.T.
Journal of Sandwich Structures and Materials    
278 Thermodynamic simulation of
hydrogen based thermochemical energy storage system
Choudhari M.S., Sharma V.K. International Journal of Hydrogen Energy    
279 Dissimilar friction stir welding of AISI 430 ferritic and AISI 304L austenitic
stainless steels
Emami S., Sadeghi- Kanani S., Saeid T., Khan
F.
Archives of Civil and Mechanical Engineering    
280 Scalable Biomimetic Coaxial Aligned Nanofiber Cardiac Patch: A Potential Model for “Clinical Trials in a Dish” Kumar N., Sridharan D., Palaniappan A., Dougherty J.A., Czirok A., Isai D.G., Mergaye M., Angelos M.G.,
Powell H.M., Khan M.
Frontiers in Bioengineering and Biotechnology    
281 Different interface delamination effects on laminated composite plate structure under free vibration analysis based on classical laminated plate
theory
Arun Kumar K., Mallikarjuna Reddy D. Smart Materials and Structures    
282 Microstructure characterization and tensile properties of CMT-based wire
plus arc additive manufactured ER2594
Nikam P.P., Arun D., Ramkumar K.D., Sivashanmugam N. Materials Characterization    
283 A comparative turbulent flow study of unconfined orthogonal and oblique slot impinging jet using large-eddy
simulation
Pawar S., Patel D.K., Bisoi M., Roy S. Physics of Fluids    
284 Characterization of hybrid oil palm empty fruit bunch/woven kenaf fabric-
reinforced epoxy composites
Hanan F., Jawaid M., Paridah M.T., Naveen J. Polymers    
285 Epithelial distribution of e-cadherin, p63, and mitotic figures in apotome images to determine the oncogenic
potentiality of oral submucous fibrosis
Nag R., Paul R.R., Pal M., Chatterjee J., Das R.K. Microscopy and Microanalysis    
286 Selective laser melting of aluminum and its alloys Wang Z., Ummethala R., Singh N., Tang S., Suryanarayana C.,
Eckert J., Prashanth K.G.
Materials    
287 Multi-objective evolutionary optimization with genetic algorithm for the design of off-grid PV-wind-
battery-diesel system
Rathish R.J., Mahadevan K., Selvaraj S.K., Booma J. Soft Computing    
288 Powder metallurgy of Al0.1CoCrFeNi high-entropy alloy Sokkalingam R., Tarraste M., Surreddi K.B., Mikli V., Muthupandi V., Sivaprasad K., Prashanth
K.G.
Journal of Materials Research    
289 A review on methods of finding losses and cooling methods to increase efficiency of electric machines Gundabattini E., Kuppan R., Solomon D.G., Kalam A., Kothari D.P., Abu
Bakar R.
Ain Shams Engineering Journal    
290 Grinding characteristics during ultrasonic vibration assisted grinding of alumina ceramic in selected dry and
MQL conditions
Das S., Pandivelan C. Materials Research Express    
291 Mechanical, DMA and Sound Acoustic behaviour of Flax woven fabric reinforced Epoxy composites Vinu Kumar S.M., Senthil Kumar K.L., Siddhi Jailani H.,
Rajamurugan G.
Materials Research Express    
292 Studies on mechanical property of squeeze cast and heat treated
AA6061-ZrO2composite
Annamalai A.R., James J., Kuppan P.,
Hemakumar S., Jen C.-P.
Materials Research Express    
293 Free vibration modes of rectangular plate under non-uniform heating: An
experimental investigation
Twinkle C.M., Pitchaimani J.,
Rajamohan V.
Structures    
294 Effect of Cryogenics-Assisted Low- Plasticity Burnishing on Laser-Clad Stellite 6 over SS420 Substrate Anirudh P.V., Kumar B., Girish G., Shailesh S., Oyyaravelu R., KannanC., Balan A.S.S. Journal of Materials Engineering and Performance    
295 Analysis of thermal stresses and its effect in the multipass welding process of SS316L Vemanaboina H., Akella S., Uma Maheshwer Rao A.C., Gundabattini E., Buddu R.K. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical
Engineering
   
296 Numerical modelling and experimental validation of crater formation in WEDM hybrid turning of Ti-6Al-4V alloy Vignesh M., Ramanujam R. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical
Engineering
   
297 Numerical investigation of sloshing in
a three-dimensional square tank under excitation using CFD code
Thirunavukkarasu B., Rajagopal T.K.R. Ships and Offshore Structures    
298 Mathematical modeling and optimization of tribological behaviour of Al 7075 based hybrid nanocomposites Kannan C., Ramanujam R., Balan A.S.S. Proceedings of the Institution of Mechanical Engineers,
Part J: Journal of Engineering Tribology
   
299 Engine characteristics study on beef tallow biodiesel produced by ethanol based co-solvent transesterification Srinivasan G.R., Palani S., Munir M., Saeed M., Thangavelu L., Mohanam A.,
Jambulingam R.
Energy Sources, Part A: Recovery, Utilization and Environmental Effects    
300 Emission reduction strategies for small single cylinder diesel engine using valve timing and swirl ratio Jain A., Porpatham E., Thipse S.S. International Journal of Engineering, Transactions B:
Applications
   
301 Small Molecule–Mediated Enhanced Osteogenesis of Human Mesenchymal
Stem Cells: a Probable Alternate for BMP-2
Hameed P., Sen D., Manivasagam G. Regenerative Engineering and Translational Medicine    
302 Therapeutic potential of mesenchymal stem cells in treating both types of diabetes mellitus and associated
diseases
Goenka V., Borkar T., Desai A., Das R.K. Journal of Diabetes and Metabolic Disorders    
303 Design and analysis of cooling co- generation cycle using aqua-ammonia
as working fluid
Shankar R., Srinivas T., Anand B., Murugavelh
S., Rivera W.
Thermal Science and Engineering Progress    
304 Integrated polygeneration system for coastal areas Govindasamy P.K., Rajagopal S., Coronas A. Thermal Science and Engineering Progress    
305 Determination of fatigue limit of coir/CNT/Fly ash reinforced epoxy
polymer matrix composite
Gopalan V., Bhardwaj P., Satonkar N., Pragasam
V.
Periodica Polytechnica Mechanical Engineering    
306 Evaluation of small wind turbine blades with Uni-vinyl foam alignments at low wind speeds for optimum
energy development
Ajay V., Venkateshwarlu B. Journal of Green Engineering    
307 Impact of carbon nanotubes reinforcement on microstructural and tribological characteristics of air plasma sprayed conventional alu- mina-titania (Al2 o3-3wt%tio2)
coatings
Thalib Basha G.M., Bolleddu V. Iranian Journal of Materials Science and Engineering    
308 Inverse analysis for simultaneous estimation of temperature dependent thermal properties of isotropic
materials
Somasundharam S., Reddy K.S. Thermal Science and Engineering Progress    
309 Investigation on Different Thermal Barrier-Coated Piston Engines Using
Mahua Biodiesel
Gangula V.R., Nandhana Gopal G.R., Tarigonda H. Journal of The Institution of Engineers
(India): Series C
   
310 Lubrication capability of solid powder lubricants in high-pressure situations Jose J., Behera N. Jurnal Tribologi    
311 Microstructural and Mechanical Properties Evaluation of Tungsten Inert Gas-Welded 316 Stainless Steel
and Pure Copper Joint
Thomas N., Mathew A., George K., Thomas N., Thampi S., Biradar A.,Rijesh M. Metallography, Microstructure, and Analysis    
312 Multi-response optimisation of electrochemical machining process parameters by harmony search-
desirability function optimiser
Kalaimathi M., Venkatachalam G., Sivakumar M., Ayyappan
S.
International Journal of Manufacturing Technology and
Management
   
313 Psychological aspects of women’s career growth constraints and outcomes: A longitudinal study from
India
Lathabhavan R. Australian Journal of Career Development    
314 Studies on surface quality of stainless steel implant material while machining Sivakumar S., Adam Khan M., Muralidharan International Journal of Machining and    
315 Vacuum hot pressing of oxide dispersion strengthened ferritic
stainless steels: effect of al addition on the microstructure and properties
Ganesan D., Sellamuthu P., Prashanth K.G. Journal of Manufacturing and Materials Processing    
316 Biodiesel production from novel non- edible caper (Capparis spinosa L.) seeds oil employing Cu–Ni doped ZrO2 catalyst Munir M., Ahmad M., Saeed M., Waseem A., Nizami A.-S., Sultana S., Zafar M., Rehan M., Srinivasan G.R., Ali A.M.,
Ali M.I.
Renewable and Sustainable Energy Reviews    
317 Critical review on third generation micro algae biodiesel production and its feasibility as future bioenergy for IC
engine applications
Jacob A., Ashok B., Alagumalai A., Chyuan O.H., Le P.T.K. Energy Conversion and Management    
318 Tailoring biocompatible Ti-Zr-Nb-Hf-Si
metallic glasses based on high-entropy alloys design approach
Calin M., Vishnu J.,
Thirathipviwat P., Popa M.-M., Krautz M.,
Materials Science and Engineering C    
319 Calibration of engine parameters and fuel blend for vibration and noise characteristics in CRDI engine fuelled with low viscous biofuel Ashok B., Jeevanantham A.K., Vignesh R., Bhat Hire K.R., Prabhu K., Raaj Kumar R.A.,
Shivshankar N., Edwin Sudhagar P.
Fuel    
320 Grain refinement in laser
manufactured Al-based composites with TiB2 ceramic
Xi L., Gu D., Guo S.,
Wang R., Ding K., Prashanth K.G.
Journal of Materials
Research and Technology
   
321 The hydroscopic effect on dynamic and thermal properties of woven jute, banana, and intra-ply hybrid natural fiber composites Rajesh M., Jayakrishna K., Sultan M.T.H., Manikandan M., Mugeshkannan V., Shah
A.U.M., Safri S.N.A.
Journal of Materials Research and Technology    
322 Strain hardening analysis and modelling for sintered Al-Cu-TiC preforms with varying process parameters during cold upsetting Jeevanantham A.K., Seenivasagam D.R., Ananthanarayanan R. Journal of Materials Research and Technology    
323 High-resolution combinatorial 3D printing of gelatin-based biomimetic
triple-layered conduits for nerve tissue engineering
Liu S., Sun L., Zhang H., Hu Q., Wang Y., Ramalingam M. International Journal of Biological Macromolecules    
324 Nanocellulose in biomedical and biosensing applications: A review Subhedar A., Bhadauria S., Ahankari S.,
Kargarzadeh H.
International Journal of Biological
Macromolecules
   
325 Comparison of the hydrogen powered homogeneous charge compression ignition mode with multiple injection schedules and the dual fuel mode
using a twin-cylinder engine
Sathishkumar S., Ibrahim M.M. International Journal of Hydrogen Energy    
326 Performance investigation of a multi- stage sorption hydrogen compressor Gupta S., Sharma V.K. International Journal of Hydrogen Energy    
327 Synthesis, characterization and biological activity of cefazolin sodium
dendrimer complexes
Viswanath V., Santhakumar K. Journal of the Taiwan Institute of Chemical
Engineers
   
328 Analytical evaluation and experimental validation of energy harvesting using low-frequency band
of piezoelectric bimorph actuator
Mishra K., Panda S.K., Kumar V., Dewangan H.C. Smart Structures and Systems    
329 Transforming waste disposals into building materials to investigate energy savings and carbon emission
mitigation potential
Arumugam C., Shaik S. Environmental Science and Pollution Research    
330 Cellulase immobilized magnetic nanoparticles for green energy production from Allamanda schottii L: Sustainability research in waste
recycling
Vijayalakshmi S., Govindarajan M., Al- Mulahim N., Ahmed Z., Mahboob S. Saudi Journal of Biological Sciences    
331 Study on Flexural Properties of Lotus, Eucalyptus Composites Reinforced with Epoxy and E-glass Fibers in
Different Orientations
Antham Veettil A., Dharmarajan Thayyil A., Thamba N.B.,
Mangalaraja R.V.
Journal of Natural Fibers    
332 Vibration and Wear Characteristics of Aloevera/Flax/Hemp Woven Fiber Epoxy Composite Reinforced with
Wire Mesh and BaSO4
krishnasamy P., Rajamurugan G., Aravindraj S., Sudhagar
P.E.
Journal of Natural Fibers    
333 Development of biofuel from Nigella sativa biomass and its suitability for energy application Muniappan S.K., Bragadeshwaran A., Kasianantham N., Rajasekar V., Chinnadurai K.,
Balusamy S., Ibrahim M.I.M.
Biomass Conversion and Biorefinery    
334 Experimental analysis of higher alcohol–based ternary biodiesel blends in CI engine parameters through multivariate and desirability approaches Kumar A.N., Ashok B., Nanthagopal K., Ong H.C., Geca M.J., Victor J., Vignesh R., Jeevanantham A.K.,
Kannan C., Kishore P.S.
Biomass Conversion and Biorefinery    
335 3D printing-assisted combinatorial approach for designing mechanically- tunable and vascular supportive nanofibrous membranes to repair
perforated eardrum
Liu S., Huo Z., Zhang H., Hu Q., Ramalingam M. Journal of Applied Polymer Science    
336 Preliminary investigation of the performance of an engine equipped with an advanced axial turbocharger
turbine
Guarda G., Pesyridis A., Sam A.A. Applied Sciences (Switzerland)    
337 Formulation and evaluation of rutin- loaded solid lipid nanoparticles for the treatment of brain tumor Pandian S.R.K., Pavadai P., Vellaisamy S., Ravishankar V., Palanisamy P., Sundar L.M., Chandramohan V., Sankaranarayanan M.,
Panneerselvam T., Kunjiappan S.
Naunyn-Schmiedeberg's Archives of Pharmacology    
338 Augmenting the potable water produced from single slope solar still using CNT-doped paraffin wax as energy storage: an experimental approach Chamkha A.J., Rufuss D.D.W., Kabeel A.E.,
Sathyamurthy R., Abdelgaid M., Manokar A.M., Madhu B.
Journal of the Brazilian Society of Mechanical Sciences and Engineering    
339 Improvement in hot corrosion resistance of dissimilar alloy 825 and AISI 321 CO2-laser weldment by HVOF coating in aggressive salt environment at 900°C Muthu S.M., Arivarasu M., Krishna T.H., Ganguly S., Prabhakar K.V.P., Mohanty S. International Journal of Minerals, Metallurgy and Materials    
340 Experimental Investigation and Parametric Optimization on Hole Quality Assessment During Micro-drilling of Inconel 625 Superalloy Venkatesan K., Nagendra K.U., Anudeep C.M., Cotton A.E. Arabian Journal for Science and Engineering    
341 Development of Pulsed Cold Metal Transfer and Gas Metal Arc Welding Techniques on High-Strength Aerospace-Grade AA7475-T761 Kumaran T.A.V., Reddy S.A.N.J., Jerome S.,
Anbarasan N., Arivazhagan N., Manikandan M.,
Sathishkumar M.
Journal of Materials Engineering and Performance    
342 Enhancement of mechanical properties of carbon fiber reinforced epoxy matrix laminated composites
with multiwalled carbon nanotubes
Sheth D., Maiti S., Patel S., Kandasamy J., Chandan M.R., Rahaman
A.
Fullerenes Nanotubes and Carbon Nanostructures    
343 Design and implementation of an intelligent digital pitch controller for digital hydraulic pitch system hardware-in-the-loop simulator of
wind turbine
Narayanan V.L., Ramakrishnan R. International Journal of Green Energy    
344 Thermal and Weld Bead Characteristics of Bead-on-Plate
PGMA Welding of Dissimilar ASS Bead on HSLA Plate
Rajamurugan G., Ghosh P.K., Krishnasamy P.,
Dinesh D., Vinukumar S.M.
Transactions of the Indian Institute of Metals    
345 Estimation of fuel properties and characterization of hemp biodiesel using spectrometric techniques John C.B., Solamalai A.R., Jambulingam R., Balakrishnan D. Energy Sources, Part A: Recovery, Utilization
and Environmental Effects
   
346 Mechanical, thermal, and water absorption behaviour of jute/carbon
reinforced hybrid composites
Sathiyamoorthy M., Senthilkumar S. Sadhana - Academy Proceedings in
Engineering Sciences
   
347 Significance of Tungsten disulfide on the mechanical and machining
characteristics of phosphor bronze metal matrix composite
Sangaravadivel P., Rajamurugan G., Krishnasamy P. Advanced Composites Letters    
348 Dynamic modeling and operation strategy of natural gas fueled SOFC- Engine hybrid power system with hydrogen addition by metal hydride
for vehicle applications
Wu Z., Zhu P., Yao J.,
Tan P., Xu H., Chen B., Yang F., Zhang Z., Porpatham E., Ni M.
eTransportation    
349 Selective laser melting of high- strength, low-modulus Ti–35Nb–7Zr– 5Ta alloy Ummethala R., Karamched P.S., Rathinavelu S., Singh N., Aggarwal A., Sun K., Ivanov E., Kollo L.,
Okulov I., Eckert J., Prashanth K.G.
Materialia    
350 Recent developments in corona virus disease-2019 (Covid-19) Vijayalakshmi S. Research Journal of Biotechnology    
351 Study on effect of diverse air inlet arrangement on thermal management
of cylindrical lithium-ion cells
Sharma A., Patil Y., Krishnaiah R., Ashok B.,
Garg A., Gao L.
Heat Transfer    
352 A review on electrodeposition of hard chrome plating Jeeva P.A. Journal of Corrosion Science and Engineering    
353 Optimal robotic assembly sequence planning using crab shell search
algorithm
Murali G.B., Deepak B.B.V.L., Biswal B.B. International Journal of Mechatronics and
Automation
   
354 Machine learning based prognostic model and mobile application software platform for predicting infection susceptibility of COVID-19 using healthcare data Srivatsan R., Indi P.N., Agrahari S., Menon S., Ashok S.D. Research on Biomedical Engineering    
355 Additive manufacturing of a martensitic Co–Cr–Mo alloy: Towards circumventing the strength–ductility trade-off Wang Z., Tang S.Y., Scudino S., Ivanov Y.P., Qu R.T., Wang D., Yang C., Zhang W.W., Greer
A.L., Eckert J., Prashanth K.G.
Additive Manufacturing    
356 Selective laser melting of Ti6Al4V: Effect of laser re-melting Karimi J., Suryanarayana C.,
Okulov I., Prashanth K.G.
Materials Science and Engineering A    
357 Potential of oil palm empty fruit bunch (OPEFB) and sugarcane bagasse fibers for thermal insulation application
– A review
Ramlee N.A., Naveen J., Jawaid M. Construction and Building Materials    
358 Agent Pseudonymous Authentication- Based Conditional Privacy Preservation: An Emergent Intelligence
Technique
Chavhan S., Gupta D., Chandana B.N., Khanna A., Rodrigues J.J.P.C. IEEE Systems Journal    
359 Performance comparison between H2-
metal hydrides and CO2-adsorbents- based sorption refrigeration systems
Syed S.N., Sharma V.K. International Journal of Energy Research    
360 Characterisation of La0.9Ce0.1Ni5 alloy for the development of single- stage thermally driven sorption hydrogen compressor Gupta S., Sharma V.K. International Journal of Energy Research    
361 Performance comparison of advanced ceramic cladding approaches via solid- state and traditional welding processes: A review Selvaraj S.K., Srinivasan K., Deshmukh J., Agrawal D., Mungilwar S., Jagtap R., Hu Y.-C. Materials    
362 Ballistic Performance of Natural Fiber Based Soft and Hard Body Armour- A Mini Review Naveen J., Jayakrishna K., Hameed Sultan M.T.B., Amir S.M.M. Frontiers in Materials    
363 Endothelial progenitor/stem cells in engineered vessels for vascular transplantation Muniswami D.M., Reddy L.V.K., Amirtham S.M., Babu S., Raj A.N., Sen D., Manivasagam G. Journal of Materials Science: Materials in Medicine    
364 Processing of spark plasma sintered fe alloy and enhancing its surface properties by alcrn monolayer coating by cathodic arc plasma physical vapor
deposition process
Kumar T.S., Annamalai A.R., Srikanth M., Jen C.-P. Coatings    
365 Microstructure evolution and mechanical properties of spark plasma sintered manganese addition on Ti- 48Al-2Cr-2Nb alloys Annamalai A.R., Srikanth M., Varshney R., Ashokkumar M.Y., Patro S.K., Jen C.-P. Metals    
366 A study of silicon carbide reinforced W- Ni-Cu based heavy alloys sintered with different heating modes Annamalai A.R., Chaurasia J.K., Srikanth M., Agrawal D.K., Jen
C.-P.
Materials Research Express    
367 Surface receptor-mediated targeted drug delivery systems for enhanced cancer treatment: A state-of-the-art review Kunjiappan S., Pavadai P., Vellaichamy S., Ram Kumar Pandian S., Ravishankar V., Palanisamy P., Govindaraj S., Srinivasan G., Premanand A.,
Sankaranarayanan M., Theivendren P.
Drug Development Research    
368 Evaluation of hot corrosion performance of HVOF coatings on PCGTA welded Fe-based alloy A-286 in Na2SO4%-7.5%NaVO3%-5%NaCl
environment
Muthu S.M., Arivarasu M. Surface Topography: Metrology and Properties    
369 Tribological performance of nanolubricants dispersed with graphene oxide and detonation nanodiamond Javeed A., John B. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering
Tribology
   
370 A numerical study on the single pulsed energy addition based unsteady wave drag reduction at varied hypersonic flow regimes Rajasekhar Rao D.S.N.V., John B. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering    
371 Ergonomic evaluation of the risk factors causing pain in the upper part of the body among IT professionals in
India
Sahu M., Gnanaraj Solomon D., Vijay S.J., Sudhahar J.C. Work    
372 Influence of Carbon Nanotubes Reinforcement on Characteristics of Thermally Sprayed Ceramic Coatings Mohammed Thalib Basha G., Venkateshwarlu B. Surface Review and Letters    
373 Drag and Heat Flux Reduction using Counterflow Jet and Spike - Analysis of their Equivalence for a Blunt Cone Geometry at Mach 8 John B., Bhargava D., Punia S., Rastogi P. Journal of Applied Fluid Mechanics    
374 A Numerical Investigation on the Equivalence of Shock-Wave/
Boundary-Layer Interactions using a Two Equations RANS Model
John B., Vivekkumar P. Journal of Applied Fluid Mechanics    
375 Residual stress analysis, mechanical and weldments metallurgical of Monel properties 400 and of AISI dissimilar 316 Yelamasetti B., Rajyalakshmi G. International Journal of Materials Research    
376 Application of MQL for developing sustainable EDM and process parameter optimisation using ANN and
GRA method
Srinivas V.V., Ramanujam R., Rajyalakshmi G. International Journal of Business Excellence    
377 Automotive Headlamp High Power Led Cooling System And Its Effect On Junction Temperature And Light Intensity Chidambaram R.K., Arunachalam R. Journal of Thermal Engineering    
378 Comparative investigation of fly ash- coated semi-adiabatic diesel engine on performance and emission characteristics by using cotton seed
biodiesel and emulsified cotton seed biodiesel
Uttamrao K.N., Premkartikkumar S.R. International Journal of Ambient Energy    
379 Biocompatible High Entropy Alloys with Excellent Degradation Resistance in a Simulated Physiological Environment Shittu J., Pole M., Cockerill I., Sadeghilaridjani M., Reddy L.V.K., Manivasagam G., Singh H., Grewal H.S., Arora
H.S., Mukherjee S.
ACS Applied Bio Materials    

Last updated on:22 July 2021

2019

Sl No Title of paper Name of the author/s Name of journal Indexed InScopus / WOS/Pub Med / ICI / Non Scopus ISSN number
1 An investigation on CRDi engine characteristic using renewable orange-peel oil Ashok B., Nanthagopal K., Arumuga Perumal D., Babu J.M., Tiwari A., Sharma A. Energy Conversion and Management WOS 1968904
2 Investigation on diethyl ether as an additive with Calophyllum Inophyllum biodiesel for CI engine application Nanthagopal K., Ashok B., Garnepudi R.S., Tarun K.R., Dhinesh B. Energy Conversion and Management WOS 1968904
3 Functionally graded graphene reinforced porous nanocomposite curved beams: Bending and elastic stability using a higher-order model with thickness stretch effect Polit O., Anant C., Anirudh B., Ganapathi M. Composites Part B: Engineering WOS 13598368
4 Effects of n-octanol as a fuel blend with biodiesel on diesel engine characteristics Ashok B., Nanthagopal K., Anand V., Aravind K.M., Jeevanantham A.K., Balusamy S. Fuel WOS 162361
5 Effect of n-butanol fumigation on the regulated and unregulated emission characteristics of a diesel engine Gowtham M., Mohan C.G., Prakash R. Fuel WOS 162361
6 Effect of biodiesel, biodiesel binary blends, hydrogenated biodiesel and injection parameters on NOx and soot emissions in a turbocharged diesel engine Rajkumar S., Thangaraja J. Fuel WOS 162361
7 Study on decanol and Calophyllum Inophyllum biodiesel as ternary blends in CI engine Nanthagopal K., Ashok B., Saravanan B., Ramesh Pathy M., Sahil G., Ramesh A., Nurun Nabi M., Golam Rasul M. Fuel WOS 162361
8 Study on isobutanol and Calophyllum inophyllum biodiesel as a partial replacement in CI engine applications Ashok B., Nanthagopal K., Saravanan B., Azad K., Patel D., Sudarshan B., Aaditya Ramasamy R. Fuel WOS 162361
9 Investigation of thermo-elastic buckling of variable stiffness laminated composite shells using finite element approach based on higher-order theory Aditya Narayan D., Ganapathi M., Pradyumna B., Haboussi M. Composite Structures WOS 2638223
10 Axial Suspension Plasma Spraying: An ultimate technique to tailor Ti6Al4V surface with HAp for orthopaedic applications Hameed P., Gopal V., Bjorklund S., Ganvir A., Sen D., Markocsan N., Manivasagam G. Colloids and Surfaces B: Biointerfaces WoS 0927-7765
11 A review on injectable chitosan/beta glycerophosphate hydrogels for bone tissue regeneration Saravanan S., Vimalraj S., Thanikaivelan P., Banudevi S., Manivasagam G. International Journal of Biological Macromolecules WoS 0141-8130
12 Mesoscopic analysis of MHD double diffusive natural convection and entropy generation in an enclosure filled with liquid metal Arun S., Satheesh A. Journal of the Taiwan Institute of Chemical Engineers WOS 18761070
13 Degradation behavior of metastable β Ti-15-3 alloy for fastener applications Tiyyagura H.R., Kumari S., Mohan M.K., Pant B., Nageswara Rao M. Journal of Alloys and Compounds WOS 09258388
14 Microstructure and properties of inconel 718 and AISI 416 laser welded joints K. D.R., Sidharth D., K.V. P.P., Rajendran R., K. G.M., Narayanan S. Journal of Materials Processing Technology WOS 9240136
15 Argon and argon-hydrogen shielding gas effects on the laves phase formation and corrosion behavior of Inconel 718 gas tungsten arc welds Anbarasan N., Jerome S., Arivazhagan N. Journal of Materials Processing Technology WOS 9240136
16 Transient characteristics of fine powder flows within fluidized dense phase pneumatic conveying systems Alkassar Y., Agarwal V.K., Behera N., Jones M.G., Pandey R.K. Powder Technology WOS 325910
17 Effect of La2O3 addition and sintering mode on the mechanical properties and microstructural evolution on an 8YSZ ceramic alloy Muthuchamy A., Nagaraju N., Agrawal D.K., Annamalai A.R. Ceramics International WOS 2728842
18 Engine parameter optimization of palm oil biodiesel as alternate fuel in CI engine Kumar A.N., Kishore P.S., Raju K.B., Kasianantham N., Bragadeshwaran A. Environmental Science and Pollution Research WOS 16147499
19 Enhancement of low cycle vibration induced fatigue life of composite beam having central hole using CNT reinforcement: An experimental study Varma V., Rajamohan V. Mechanics of Advanced Materials and Structures WOS 1537-6532
20 Evaluation of microclimates and assessment of thermal comfort of Panthera leo in the Masai Mara National Reserve, Kenya Ghosh S., Arvind D.G., Dobbie S. International Journal of Biometeorology WOS 14321254
21 NOx emission reduction using permanent/electromagnet-based fuel reforming system in a compression ignition engine fueled with pine oil Thiyagarajan S., Edwin Geo V., Ashok B., Nanthagopal K., Vallinayagam R., Saravanan C.G., Kumaran P. Clean Technologies and Environmental Policy WOS 16189558
22 Statistical analysis of different machining characteristics of EN-24 alloy steel during dry hard turning with multilayer coated cermet inserts Das A., Patel S.K., Hotta T.K., Biswal B.B. Measurement: Journal of the International Measurement Confederatio WOS 2632241
23 Experimental and numerical procedure for studying strength and heat generation responses of ultrasonic welding of polymer blends Natesh M., Yun L., Arungalai Vendan S., Ramesh Kumar K.A., Gao L., Niu X., Peng X., Garg A. Measurement: Journal of the International Measurement Confederatio WOS 2632241
24 Attenuation of Sommerfeld effect in an internally damped eccentric shaft-disk system via active magnetic bearings Jha A.K., Dasgupta S.S. Meccanica WOS 15729648
25 Failure evaluation of SA 210C riffle water wall tubes in 70 MW CFBC boiler Senthur Prabu S., Choudhary A., Mittal N., Gupta S., Ramkumar D., Natarajan A. Engineering Failure Analysis WOS 13506307
26 Drilling performances and wear characteristics of coated drill bits during drilling reinforced concrete Sathish S., Ramkumar S., Geetha M. International Journal of Applied Ceramic Technology WOS 17447402
27 Effect of chilled air on delamination, induced vibration, burr formation and surface roughness in CFRP drilling: A comparative study Mannoj Rajkumar G., Bhardwaj D., Kannan C., Oyyaravelu R., Balan A.S.S. Materials Research Express WOS 20531591
28 Hot corrosion studies of HVOF sprayed carbide and metallic powder coatings on alloy 80A at 900 °c Sreenivasulu V., Manikandan M. Materials Research Express WOS 20531591
29 Effects of plastic strains on passivation behavior of different austenitic stainless steel grades Srinivasan N., Kumaran S.S., Venkateswarlu D. Materials Research Express WOS 20531591
30 Effects of in-grain misorientation developments in sensitization of 304 L austenitic stainless steels Srinivasan N., Kumaran S.S., Venkateswarlu D. Materials Research Express WOS 20531591
31 An investigation of mechanical properties of madar fiber reinforced polyester composites for various fiber length and fiber content Ganeshan P., Kumaran S.S., Raja K., Venkateswarlu D. Materials Research Express WOS 20531591
32 Mechanical and abrasive wear behavior of cenosphere filled carbon reinforced epoxy composites using Taguchi-Grey relational analysis Vinu Kumar S.M., Suresha B., Rajamurugan G., Megalingam A. Materials Research Express WOS 20531591
33 Dynamic Characterization of a Bistable Energy Harvester Under Gaussian White Noise for Larger Time Constant Dasgupta S.S., Rajamohan V., Jha A.K. Arabian Journal for Science and Engineering WOS 21914281
34 CFD analysis of aerodynamic drag effects on Vacuum Tube Trains Gillani S.A., Panikulam V.P., Sadasivan S., Yaoping Z. Journal of Applied Fluid Mechanics WOS 17353645
35 Hot Corrosion Studies on Detonation-Gun-Sprayed NiCrAlY and 80Ni–20Cr Coatings on Alloy X22CrMoV12-1 at 600 °C Subramani P., Padgelwar N., Shetty S., Pandit A., Sreenivasulu V., Arivazhagan N., Duoli W.U., Manikandan M. Transactions of the Indian Institute of Metals WOS 9751645
36 Effect of Nickel Addition on Microstructure and Mechanical Properties of the Spark Plasma Sintered Ti–6Al–4V Alloy Muthuchamy A., Rajadurai M., Annamalai A.R., Agrawal D.K. Transactions of the Indian Institute of Metals WOS 9751645
37 Effect of post-weld heat treatment on the microstructure and tensile properties of electron-beam-welded 21st century nickel-based super alloy 686 Arulmurugan B., Modi K., Sanjay A.P., Yashwant P.A., Rickwith N., Mohan C.G., Subramani P., Agilan M., Manikandan M., Arivazhagan N. Sadhana - Academy Proceedings in Engineering Sciences WOS 9737677
38 Estimation of manufacturing systems degradation rate for residual life prediction through dynamic workload adjustment Manupati V.K., Panigrahi S., Ahsan M., Lahiri S., Chandra A., Thakkar J.J., Putnik G., Varela M.L.R. Sadhana - Academy Proceedings in Engineering Sciences WOS 9737677
39 Nuclear energy-driven Kalina cycle system suitable for Indian climatic conditions Ganesh N.S., Srinivas T. Energy Sources, Part A: Recovery, Utilization and Environmental Effects WOS 15567230
40 Knowledge management based supplier selection of wind turbine manufacturer supply chain Kumar P., John Rajan A. International Journal of Knowledge Management Studies Scopus 17438276
41 A joint two-echelon inventory model coupled with credit period and quadratic price dependent demand Krugon, S., Nagaraju, D. International Journal of Mechanical Engineering and Technology Scopus 09766359
42 Design and fabrication of an automated seat pan and armrest height adjustable chair Sahu, M., Vijay, S.J., Masepogu Wilson Kumar, S., Gnanaraj, D. International Journal of Mechanical Engineering and Technology Scopus 09766359
43 Performance, combustion and emission characteristics of juliflora biodiesel fuelled DI diesel engine Asokan M.A., Senthur Prabu S., Bade P.K.K., Nekkanti V.M., Gutta S.S.G. Energy WOS 3605442
44 Dynamic characterization of a CNT reinforced hybrid uniform and non-uniform composite plates Lakshmipathi J., Vasudevan R. Steel and Composite Structures WOS 15986233
45 Techno-economic assessment of coconut biodiesel as a potential alternative fuel for compression ignition engines Thangaraja J., Srinivasan V. Environmental Science and Pollution Research WOS 16147499
46 Nonlinear axisymmetric dynamic buckling of functionally graded graphene reinforced porous nanocomposite spherical caps Haboussi M., Sankar A., Ganapathi M. Mechanics of Advanced Materials and Structures WOS 15376532
47 Dynamic characterization of CNT-reinforced hybrid polymer composite beam under elevated temperature—an experimental study Jakkamputi L.P., Rajamohan V. Polymer Composites WOS 15480569
48 Laser shock peening wavelength conditions for enhancing corrosion behaviour of titanium alloy in chloride environment Ranjith Kumar G., Rajyalakshmi G., Swaroop S., Arul Xavier Stango S., Vijayalakshmi U. Journal of the Brazilian Society of Mechanical Sciences and Engineering WOS 18063691
49 Development of gas tungsten arc welding using current pulsing technique to preclude chromium carbide precipitation in aerospace-grade alloy 80A Subramani P., Manikandan M. International Journal of Minerals, Metallurgy and Materials WOS 1869103X
50 Flexural properties of multiscale nanocomposites containing multiwalled carbon nanotubes coated glass fabric in epoxy/graphene matrix Mani A., Tambe P., Rahaman A. Composite Interfaces WOS 15685543
51 Behaviour of Alloy 617 OCC Under Hot Corrosion Conditions Encountered in Boilers in A-USC Power Plants Hari P.R., Arivazhagan N., Nageswara Rao M., Pavan A.H.V. Transactions of the Indian Institute of Metals WOS 9751645
52 Hot Corrosion Demeanour of Alloy 80A Weldments Fabricated Through Tungsten Inert Gas Welding Technique Subramani P., Manikandan M. Transactions of the Indian Institute of Metals WOS 9751645
53 Influence of Shot Peening on Residual Stress Distribution and Corrosion Resistance of Additive Manufactured Stainless Steel AISI 316L Vinoth Jebaraj A., Sugavaneswaran M. Transactions of the Indian Institute of Metals WOS 9751645
54 Analysis of performance and emission characteristics of TBC coated low heat rejection engine Reddy G.V., Rasu N.G., Prasad T.H. International Journal of Ambient Energy Scopus 21628246
55 Application of fuzzy QFD for improving the process sustainability characteristics: A case study Vimal K.E.K., Vinodh S., Jayakrishna K. International Journal of Services and Operations Management Scopus 17442389
56 Dataset on optimization of EDM machining parameters by using central composite design Soundhar A., Zubar H.A., Sultan M.T.B.H.H., Kandasamy J. Data in Brief Scopus 23523409
57 Ergonomic design and RULA analysis of a motorised wheelchair for disabled and elderly Paul B.P., Darius Gnanaraj S., Paul S. International Journal of Mechanical Engineering and Technology Scopus 09766359
58 Re-designing door handles to reduce aerodynamic drag in road vehicles Gautham Ramchadran, Archana Nepak, Yagnavalkya Mukkamala, 32ns AIAA Applied Aerodynamics Conference    
59 Surface properties and cytocompatibility of Ti-6Al-4V fabricated using Laser Engineered Net Shaping A R., Mitun D., Balla V.K., Dwaipayan S., D D., Manivasagam G. Materials Science and Engineering C WOS 9284931
60 An experimental analysis on the effect of n-pentanol- Calophyllum Inophyllum Biodiesel binary blends in CI engine characteristcis Ashok B., Jeevanantham A.K., Nanthagopal K., Saravanan B., Senthil Kumar M., Johny A., Mohan A., Kaisan M.U., Abubakar S Energy WOS 3605442
61 Comparative assessment of hexanol and decanol as oxygenated additives with calophyllum inophyllum biodiesel Ashok B., Nanthagopal K., Darla S., Chyuan O.H., Ramesh A., Jacob A., Sahil G., Thiyagarajan S., Geo V.E. Energy WOS 3605442
62 Performance analysis of metal hydride based simultaneous cooling and heat transformation system Mohan M., Sharma M., Sharma V.K., Kumar E.A., Satheesh A., Muthukumar P. International Journal of Hydrogen Energy WOS 3603199
63 Deformation characteristics of sinusoidally-corrugated laminated composite panel – A higher-order finite element approach Karakoti A., Kar V.R. Composite Structures WOS 2638223
64 Studies on thermodynamic performance of three stage sorption heat transformer Mohan M., Sharma V.K. Applied Thermal Engineering WOS 13594311
65 A catholically pre-treated low cost screen-printed carbon electrode surface for metal compounds electrocatalyst like hydrogen evolution activity Chen Y.-J., Yang T.-H., Chang J.-L., Cheng W.- L., Kumar A.S., Zen J.- M. Journal of Electroanalytical Chemistry WOS 15726657
66 Processing of titanium-based human implant material using wire EDM kumar S., Khan M.A., Muralidharan B. Materials and Manufacturing Processes WOS 15322475
67 Effect of electromagnet-based fuelreforming system on high-viscous andlow-viscous biofuel fueled in heavyduty CI engine Thiyagarajan S., Sonthalia A., Edwin Geo V., Ashok B., Nanthagopal K., Karthickeyan V., Dhinesh B. Journal of Thermal Analysis and Calorimetry WOS 15882926
68 Electric discharge texturing of HSS cutting tool and its performance in dry machining of aerospace alloy Singh B., Sasi R., Kanmani Subbu S., Muralidharan B. Journal of the Brazilian Society of Mechanical Sciences and Engineering WOS 18063691
69 Tribological performance evaluation of fused mullite-reinforced hybrid composite brake pad for defence application Vineeth Kumar V., Senthil Kumaran S., Dhanalakshmi S., Sivaramakrishnan R. Journal of the Brazilian Society of Mechanical Sciences and Engineering WOS 18063691
70 Fractional order PID based optimal control for fractionally damped nonlocal nanobeam via genetic algorithm Jha A.K., Dasgupta S.S. Microsystem Technologies WOS 14321858
71 Microstructure and Mechanical Characterization of Incoloy 925 Welds in the As-Welded and Direct Aged conditions Sujai S., Devendranath Ramkumar K. Journal of Materials Engineering and Performance WOS 15441024
72 Impact of BaSO 4 filler on woven Aloevera/Hemp hybrid composite: Dynamic mechanical analysis Arulmurugan M., Prabu K., Rajamurugan G., Selvakumar A.S. Materials Research Express WOS 20531591
73 Wear characteristics studies on graphene reinforced AA7050 based composite Venkatesan S., Anthony Xavior M. Materials Research Express WOS 20531591
74 Effect of Pulse Frequency on Microstructural and Corrosion Properties of Inconel 718 Gas Tungsten Arc Weldments Anbarasan N., Jerome S., Suresh G., Oyyaravelu R. Transactions of the Indian Institute of Metals WOS 9751645
75 Optimized inventory control on construction materials by application of E-technology transfer along JIT Vardhana B.H., Venugopal P. Journal of Testing and Evaluation WOS 19457553
76 Influence of alkaline treatment on improving mechanical properties of jute fiber-reinforced epoxy (LY556) composites Joseph G.B., Rajan A.J., Jeevahan J., Mageshwaran G. FME Transactions Scopus 2406128X
77 Surface engineering of LENS-Ti-6Al4V to obtain nano- and micro-surface topography for orthopedic application A R., Das M., Balla V.K., D D., Sen D., Manivasagam G. Nanomedicine: Nanotechnology, Biology, and Medicine WOS 15499634
78 Performance analysis of a novel SOFC-HCCI engine hybrid system coupled with metal hydride reactor for H 2 addition by waste heat recovery Wu Z., Tan P., Zhu P., Cai W., Chen B., Yang F., Zhang Z., Porpatham E., Ni M. Energy Conversion and Management WOS 1968904
79 Influence of hexanol as additive with Calophyllum Inophyllum biodiesel for CI engine applications Ramesh A., Ashok B., Nanthagopal K., Ramesh Pathy M., Tambare A., Mali P., Phuke P., Patil S., Subbarao R. Fuel WOS 162361
80 Experimental investigations of ethanol blended biodiesel fuel on automotive diesel engine performance, emission and durability characteristics Kandasamy S.K., Selvaraj A.S., Rajagopal T.K.R. Renewable Energy WOS 9601481
81 Structure-property evaluation of single pass Laser-arc hybrid welding of resulphurized martensitic stainless steel Ramkumar K.D., Dharmik K., Noronha B., Giri Mugundan K., Bhargav S., Phani Prabhakar K.V Journal of Materials Processing Technology WOS 9240136
82 Multi-pass arc welding techniques of 12 mm thick super-duplex stainless steel Arun D., Devendranath Ramkumar K., Vimala R. Journal of Materials Processing Technology WOS 9240136
83 Influence of γ-alumina coating on surface properties of direct metal laser sintered 316L stainless steel Sharma G.S., Sugavaneswaran M., Vijayalakshmi U., Prakash R. Ceramics International WOS 2728842
84 Dynamic characteristics of functionally graded graphene reinforced porous nanocomposite curved beams based on trigonometric shear deformation theory with thickness stretch effect Ganapathi M., Anirudh B., Anant C., Polit O. Mechanics of Advanced Materials and Structures WOS 15376532
85 Reduction of wave drag on parameterized blunt bodies using spikes with varied tip geometries Mohandas S., Krishna Siddharth R., John B Acta Astronautica WOS 945765
86 A critical appraisal of laser peening and its impact on hydrogen embrittlement of titanium alloys Ranjith Kumar G., Rajyalakshmi G., Swaroop S. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture WOS 20412975
87 An investigation on tribological and electrical behaviour of conventional and microwave processed coppergraphite composites Ayyappadas C., Muthuchamy A., Kumar N.N., Agrawal D.K., Raja Annamalai A Materials Research Express WOS 20531591
88 Comparative machining studies on custom 450 alloy with TiCN, TiAlN coated and uncoated carbide tools using Taguchi-Fuzzy logic approach Kumar T.S., Ramanujam R., Vignesh M., Rohith D., Manoj V., Sankar P.H. Materials Research Express WOS 20531591
89 Structure-property correlations of WNi-Fe-Mo heavy alloys consolidated using spark plasma sintering Muthuchamy A., Yadev D., Agrawal D.K., Annamalai R. Materials Research Express WOS 20531591
90 Structural relationships of metallurgical and mechanical properties influenced by Ni-based fillers on Gas Tungsten Arc Welded Ferritic /Austenitic SS dissimilar joints Porchilamban S., Amaladas J.R. Journal of Advanced Mechanical Design, Systems and Manufacturing WOS 18813054
91 Determination of vibrational characteristics of coir, banana and Aloe vera fibres reinforced hybrid polymer matrix composites Vimal Anand S., Venkatachalam G., Nikam T.D., Jog O.V., Suryawanshi R.T. International Journal of Acoustics and Vibrations WOS 10275851
92 Effect of Organic Modification on Multiwalled Carbon Nanotube Dispersions in Highly Concentrated Emulsions Bhagavathi Kandy S., Simon G.P., Cheng W., Zank J., Saito K., Bhattacharyya A.R. ACS Omega Scopus 24701343
93 Optimisation of fuel consumption by taguchi method in logistics systems Benrajesh P., John Rajan A International Journal of Mechanical and Production Engineering Research and Development Scopus 22498001
94 Effect of cryogenic treatment on the wear behavior of additive manufactured 316L stainless steel Sugavaneswaran M., Kulkarni A. Tribology in Industry Scopus 22177965
95 Experimental investigation on diesel engine fuelled with hythane gas Kumma N., Gopidesi R.K., Rao T.R., Kumar K.M., Premkartikkumar S.R. International Journal of Mechanical Engineering and Technology Scopus 9766359
96 Vibration and damping characteristics of hybrid (glass- jute/ sisal/ hemp) fiber reinforced polymer matrix composites to protect environment by natural fiber Shankarganesh P.S.P., Muralikannan R., Venkatachalam G Journal of the Balkan Tribological Association Scopus 2094541
97 Modelling and analysis of strain hardening characteristics of sintered steel preforms under cold forging Rajeshkannan A., Narayan S., Jeevanantham A.K AIMS Materials Science Scopus 23720484
98 Quantification of environmental impacts of abrasive water jet cutting process through sustainability analysis Jayakrishna K., Vimal K.E.K., Sethuram L. International Journal of Environment and Sustainable Development Scopus 14787466
99 A numerical study on vibration control of a nonlinear Jeffcott rotor via BoucWen model Jha A.K., Dasgupta S.S. FME Transactions Scopus 14512092
100 Experimental investigation on DMFCs using reduced noble metal loading with NiTiO 3 as supportive material to enhance cell performances Thiagarajan V., Karthikeyan P., Thanarajan K., Neelakrishnan S., Manoharan R., Chen R., Fly A., Anand R., Karuppa Raj T.R., Sendhil Kumar N. International Journal of Hydrogen Energy WOS 3603199
101 A comprehensive analysis of porous graphene-reinforced curved beams by finite element approach using higherorder structural theory: Bending, vibration and buckling Anirudh B., Ganapathi M., Anant C., Polit O. Composite Structures WOS 2638223
102 Modeling a pH-sensitive Zein-coacrylic acid hybrid hydrogels loaded 5- fluorouracil and rutin for enhanced anticancer efficacy by oral delivery Kunjiappan S., Theivendran P., Baskararaj S., Sankaranarayanan B., Palanisamy P., Saravanan G., Arunachalam S., Sankaranarayanan M., Natarajan J., Somasundaram B., Wadhwani A. 3 Biotech WOS 21905738
103 Parameter optimization and texture evolution in single point incremental sheet forming process Basak S., Prasad K.S., Mehto A., Bagchi J., Ganesh Y.S., Mohanty S., Sidpara A.M., Panda S.K. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture WOS 20412975
104 Stress Corrosion Cracking of AZ91 + xCe Alloy Using Proof Ring Test in ASTM D1384 and NaCl-K2CrO4 Solutions Manivannan S., Senthil Kumaran S., Vallimanalan A., Mahendran R., Kumaresh Babu S.P. Journal of Materials Engineering and Performance WOS 15441024
105 High temperature corrosion of alloy 617 OCC at 700 °c in simulated USC power plant environment Hari P.R., Arivazhagan N., Rao M.N., Pavan A.H.V. Materials Research Express WOS 20531591
106 An investigation of phase stability, thermal conductivity and fracture toughness of 8YSZ-La2O3 ceramics Nagaraju N., Raja Annamalai A. Materials Research Express WOS 20531591
107 Investigations on mechanical and morphological characterization of chitosan reinforced polymer nanocomposites Soundhar A., Jayakrishna K. Materials Research Express WOS 20531591
108 Vibration analysis of a carbon nanotube reinforced uniform and tapered composite beams Babu Arumugam A., Rajamohan V., Bandaru N., Sudhagar P.E., Kumbhar S.G. Archives of Acoustics WOS 2300262X
109 Vibration Study on Aluminium Alloy 5083 Composite Reinforced with Montmorillonite Samuel Ratna Kumar P.S., Edwin Sudhagar P., John Alexis S., Subramani M. Transactions of the Indian Institute of Metals WOS 9751645
110 Effect of Laser Shock Peening on Commercially Pure Titanium-1 Weldment Fabricated by Gas Tungsten Arc Welding Technique Varin S., Agarwal M., Chugh A., Manikandan M., Prabhakaran S., Kalainathan S., Shukla P., Lawrence J., Arivazhagan N. Transactions of the Indian Institute of Metals WOS 9751645
111 Laser shock peening (LSP) to improve the metallurgical and mechanical properties of gas tungsten arc welding (GTAW) joints in hastelloy C-276 Nithin Joseph Reddy S.A., Prabhakaran S., Kalainathan S., Arivazhagan N., Manikandan M. Lasers in Engineering WOS 1029029X
112 Performance enhancement of solar still by using reflectors-jute cloth-improved glass angle Sahoo B.B., Subudhi C Journal of Engineering Research WOS 23071885
113 Material and Mechanical Characterization of Multi-Functional Carbon Nanotube Reinforced Hybrid Composite Materials A P., Rajamohan V., Mathew A.T. Experimental Techniques WOS 17471567
114 Dynamic Characterization and Parametric Instability Analysis of Rotating Tapered Composite Plates Under Periodic In-Plane Loading Arumugam A.B., Rajamohan V. Iranian Journal of Science and Technology - Transactions of Mechanical Engineering WOS 23641835
115 Nd 2 O 3 doped yttria stabilized zirconia ceramics fabricated by conventional and microwave sintering methods Muthuchamy A., Nagaraju N., Raja Annamalai A., Agrawal D.K. Ceramics - Silikaty WOS 18045847
116 Tungsten Heavy Alloys with Molybdenum, Y 2 O 3 and Lanthanum. A Review Prasad B.S.L., Annamalai A.R. Journal of Superhard Materials WOS 19349408
117 Spinal cord injury: pathophysiology, treatment strategies, associated challenges, and future implications Venkatesh K., Ghosh S.K., Mullick M., Manivasagam G., Sen D. Cell and Tissue Research WOS 14320878
118 Evaluation of hardness and impact strength of aluminium alloy (LM6)– soda–lime composite B L.G., Bharanidaran R. Australian Journal of Mechanical Engineering Scopus 22042253
119 Identifying key success factors of sustainability in supply chain management for industry 4.0 using DEMATEL method Bhagawati M.T., Manavalan E., Jayakrishna K., Venkumar P. Lecture Notes in Mechanical Engineering Scopus 21954356
120 Simulated annealing algorithms to minimise the completion time variance of jobs in permutation flowshops Krishnaraj J., Pugazhendhi S., Rajendran C., Thiagarajan S. International Journal of Industrial and Systems Engineering Scopus 17485045
121 Evaluation of static abd dynamic characteristics of hydrodynamic spiral-grooved journal bearings using the CFD Matlapudi J.C., Gunti P.K., Sigatapu D.S., Behera N. Engineering Review Scopus 18490433
122 Musculoskeletal disorders and ergonomic risk factors in foundry workers Qureshi A., Manivannan K., Khanzode V., Kulkarni S. International Journal of Human Factors and Ergonomics Scopus 20457812
123 Metallurgical and mechanical characterization of TiCN/TiAlN and TiAlN/TiCN bilayer nitride coatings Sampath Kumar T., Vinoth Jebaraj A., Shankar E., Tamiloli N., Sivakumar K. Surfaces and Interfaces Scopus 24680230
124 Effect of fuel injection strategies and EGR on biodiesel blend in a CRDI engine Bhowmick P., Jeevanantham A.K., Ashok B., Nanthagopal K., Perumal D.A., Karthickeyan V., Vora K.C., Jain A. Energy WOS 3605442
125 Numerical and experimental investigation on 25 cm2 and 100 cm2 PEMFC with novel sinuous flow field for effective water removal and enhanced performance Vijayakrishnan M.K., Palaniswamy K., Ramasamy J., Kumaresan T., Manoharan K., Raj Rajagopal T.K., Maiyalagan T., Jothi V.R., Yi S.-C International Journal of Hydrogen Energy WOS 3603199
126 Investigation of novel Pistacia khinjuk biodiesel in DI diesel engine with post combustion capture system Karthickeyan V., Ashok B., Nanthagopal K., Thiyagarajan S., Geo V.E. Applied Thermal Engineering WOS 13594311
127 Online second-hand shopping motivation – Conceptualization, scale development, and validation Padmavathy C., Swapana M., Paul J. Journal of Retailing and Consumer Services WOS 9696989
128 Influence of injection timing and exhaust gas recirculation (EGR) rate on lemon peel oil–fuelled CI engine Bragadeshwaran A., Kasianantham N., Kaisan M.U., Reddy D.M.S., Aravind K.M., Paul N., Ali I.M., Jose A., Chungath T. Environmental Science and Pollution Research WOS 16147499
129 Metal bellow hydroforming using additive manufactured die: a case study Prithvirajan R., Sugavaneswaran M., Sathishkumar N., Arumaikkannu G Rapid Prototyping Journal WOS 13552546
130 Development of a novel low carbon cementitious two stage layered fibrous concrete with superior impact strength Ramkumar V.R., Murali G., Asrani N.P., Karthikeyan K. Journal of Building Engineering WOS 23527102
131 Viscoelastic behavior of aloevera/hemp/flax sandwich laminate composite reinforced with BaSO4: Dynamic mechanical analysis Arulmurugan M., Prabu K., Rajamurugan G., Selvakumar A.S. Journal of Industrial Textiles WOS 15308057
132 Role of Alloy Chemistry on Stability of Passive Films in Austenitic Stainless Steel Srinivasan N., Kumaran S.S. Journal of Materials Engineering and Performance WOS 15441024
133 Optimization of bioactive compounds extraction assisted by microwave parameters from Kappaphycus alvarezii using RSM and ANFIS modeling Baskararaj S., Theivendren P., Palanisamy P., Kannan S., Pavadai P., Arunachalam S., Sankaranarayanan M., Mohan U.P., Ramasamy L., Kunjiappan S. Journal of Food Measurement and Characterization WOS 21934134
134 Multi-response optimization of friction stir corner welding of dissimilar thickness AA5086 and AA6061 aluminum alloys by Taguchi grey relational analysis Krishnan M., Subramaniam S Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science WOS 20412983
135 Investigation of magnetic field and shielding gas in electro-discharge deposition process Muralidharan B., Chelladurai H., Kanmani Subbu S. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science WOS 20412983
136 A study of molybdenum addition on WNi-Fe based heavy alloys sintered with spark plasma sintering Prasad B.S.L., Annamalai R. Bulletin of the Polish Academy of Sciences: Technical Sciences WOS 23001917
137 Investigations on induced residual stresses, mechanical and metallurgical properties of CO2 laser beam and pulse current gas tungsten arc welded SMO 254 Roshith P, Arivarasu M, Arivazhagan N, Srinivasan A, Phani Prabhakar K V Journal of Manufacturing Processes WOS 15266125
138 Tribological Behaviour of GraphiteReinforced FeNiCrCuMo High-Entropy Alloy Self-Lubricating Composites for Aircraft Braking Energy Applications Prabhu T.R., Arivarasu M., Chodancar Y., Arivazhagan N., Sumanth G., Mishra R.K Tribology Letters WOS 15732711
139 Air Oxidation and Hot Corrosion Behavior of Bare and CO2 LaserWelded Superalloy A-286 at 700 °C Muthu S.M., Arivarasu M. Transactions of the Indian Institute of Metals WOS 9751645
140 Role of aging induced α precipitation on the mechanical and tribocorrosive performance of a β Ti-Nb-Ta-O orthopedic alloy Acharya S., Bahl S., Dabas S.S., Hassan S., Gopal V., Panicker A.G., Manivasagam G., Suwas S., Chatterjee K. Materials Science and Engineering C WOS 9284931
141 Optimisation of EGR and SOI for better combustion characteristics using response surface methodology Ganji P.R., Chowdary Putta K.B., Kattela S.P., Raju V.R.K., Srinivasa Rao S. International Journal of Ambient Energy Scopus 21628246
142 Impact of addition of two ether additives with high speed dieselCalophyllum Inophyllum biodiesel blends on NOx reduction in CI engine Jeevanantham A.K., Nanthagopal K., Ashok B., Al-Muhtaseb A.H., Thiyagarajan S., Geo V.E., Ong H.C., Samuel K.J. Energy WOS 3605442
143 Effect of low energy laser shock peening on the mechanical integrity of Hastelloy C-276 weld Devendranath Ramkumar K., Narenthiran A., Konjenti A., Pravin P.N., Kanish T.C. Journal of Materials Processing Technology WOS 9240136
144 Experimental investigation on DMFCs using reduced noble metal loading with NiTiO3 as supportive material to enhance cell performances Thiagarajan V., Karthikeyan P., Thanarajan K., Neelakrishnan S., Manoharan R., Chen R., Fly A., Anand R., Karuppa Raj T.R., Sendhil Kumar N. International Journal of Hydrogen Energy WOS 3603199
145 Preclusion of carbide precipitates in the Hastelloy X weldment using the current pulsing technique Sathishkumar M., Manikandan M. Journal of Manufacturing Processes WOS 15266125
146 Experimental study and Shannon entropy analysis of pressure fluctuations and flow mode transition in fluidized dense phase pneumatic conveying of fly ash Alkassar Y., Agarwal V.K., Pandey R.K., Behera N. Particuology WOS 16742001
147 Integrated process planning and scheduling in networked manufacturing systems for I4.0: a review and framework proposal Varela M.L.R., Putnik G.D., Manupati V.K., Rajyalakshmi G., Trojanowska J., Machado J. Wireless Networks WOS 4444
148 Comparative analysis of particle size on the mechanical and metallurgical characteristics of Al2O3-reinforced sintered and extruded AA2014 nanohybrid composite Senthil Kumar R., Prabu K., Rajamurugan G., Ponnusamy P Journal of Composite Materials WOS 1530793X
149 Thermal fields and residual stresses analysis in TIG weldments of SS 316 and Monel 400 by numerical simulation and experimentation Balram Y., Rajyalakshmi G. Materials Research Express WOS 20531591
150 Friction material composite: Types of brake friction material formulations and effects of various ingredients on brake performance-a review Kumar V.V., Kumaran S.S. Materials Research Express WOS 20531591
151 Energy Addition-Based Virtual Cowl for Performance Enhancement of Scramjet Intake John B., Vijapuri D., Thota B., Katoch N. Journal of Aerospace Engineering WOS 19435525
152 Experimental investigation on a hybrid desalination and cooling unit using humidification-dehumidification technique Chiranjeevi C., Srinivas T., Shankar R. Desalination and Water Treatment WOS 19443986
153 WEDM Parameter Optimization for Silicon@r-GO/Magneisum Composite Using Taguchi Based GRA Coupled PCA Kavimani V., Prakash K.S., Thankachan T., Nagaraja S., Jeevanantham A.K., Jhon J.P Silicon WOS 18769918
154 Effect of Fluidized Bed Processing on Performance of 354 Aluminum Compressor Wheels Produced by Counter-Gravity Casting Dinesh Babu G., Nageswara Rao M. Transactions of the Indian Institute of Metals WOS 9751645
155 Influence of fumigated calophyllum inophyllum vapours on the combustion, performance and emission characteristics of a diesel engine Gowtham M., Prakash R. Energy Sources, Part A: Recovery, Utilization and Environmental Effects WOS 15567230
156 Co-pyrolysis of Juliflora biomass with low-density polyethylene for bio-oil synthesis Somasundaram M., k M.P. Energy Sources, Part A: Recovery, Utilization and Environmental Effects WOS 15567230
157 Modelling and simulation of electrohydraulic circuit used in hydraulic power pack of A CNC machine tool Ramesh S., Denis Ashok S., Nagaraj S. International Journal of Recent Technology and Engineering Scopus 22773878
158 Two wheeler performance gauging by analyzing the relationship between the mileage of vehicle and its associated variables – A green logistical approach Ben Rajesh P., John Rajan A. International Journal of Mechanical and Production Engineering Research and Development Scopus 22498001
159 A comparative study of novel tribological response of hybrid epoxy composites reinforced by MWCNT/graphene/nanodiamond Singh B., Mohanty A. Journal of Surface Science and Technology Scopus 9769420
160 Wear and hardness studies of graphene decorated with graphene quantum dots (G-D-GQD) embedded epoxy nano composites George M., Mohanty A Journal of Surface Science and Technology Scopus 9769420
161 Smart Sankey picturization for energy management systems in India Chandra A., Ghosh S. AI and Society Scopus 14355655
162 Influence of calcium sulfate whiskers on the tribological characteristics of automotive brake friction materials Sudhan Raj J., Christy T.V., Darius Gnanaraj S., Sugozu B Engineering Science and Technology, an International Journal Scopus 22150986
163 Application of value stream mapping for cycle time reduction in production of link and roller assembly Manupati V.K., Gangal C., Varela M.L.R., Mobin M. International Journal of Services and Operations Management Scopus 17442389
164 Nageswara Rao M., Narayana Murty S.V.S Hot deformation of 18 % Ni maraging steels – A review Materials Performance and Characterization Scopus 21653992
165 Sustainable development from energy alternatives to mitigate climate change due to faunal emissions - A review Krishnan P. Nature Environment and Pollution Technology Scopus 23953454
166 Hydrothermal treatment of etched titanium: A potential surface nanomodification technique for enhanced biocompatibility Vishnu J., K Manivasagam V., Gopal V., Bartomeu Garcia C., Hameed P., Manivasagam G., Webster T.J. Nanomedicine: Nanotechnology, Biology, and Medicine WOS 15499634
167 Nd2O3 doped yttria stabilized zirconia ceramics fabricated by conventional and microwave sintering methods Muthuchamy A., Nagaraju N., Raja Annamalai A., Agrawal D.K Ceramics - Silikaty WOS 18045847
168 Simultaneous reduction of NOx and smoke emissions with low viscous biofuel in low heat rejection engine using selective catalytic reduction technique Karthickeyan V., Thiyagarajan S., Geo V.E., Ashok B., Nanthagopal K., Chyuan O.H., Vignesh R Fuel WOS 162361
169 Performance investigation of novel multi stage multi effect sorption thermodynamic system for heating and cooling applications Mohan M., Sharma V.K Applied Thermal Engineering WOS 13594311
170 Effect of flow fields and humidification of reactant and oxidant on the performance of scaled-up PEM-FC using CFD code Selvaraj A.S., Rajagopal T.K.R. International Journal of Energy Research WOS 1099114x
171 Large amplitude free flexural vibrations of functionally graded graphene platelets reinforced porous composite curved beams using finite element based on trigonometric shear deformation theory Aditya Narayan D., Ben Zine T., O.Polit, Pradyumna B., Ganapathi M., International Journal of Non-Linear Mechanics WOS 207462
172 Primary and Secondary Instability Region Analysis of Rotating Carbon Nanotube-Reinforced Non-uniform Hybrid Composite plates Lakshmipathi J., Rajamohan V., Rahatekar S.S. International Journal of Structural Stability and Dynamics WOS 17936764
173 Tolerance Analysis in Selective Assembly of Multiple Component Features to Control Assembly Variation Using Matrix Model and Genetic Algorithm Jeevanantham A.K., Chaitanya S.V., Rajeshkannan A International Journal of Precision Engineering and Manufacturing WOS 20054602
174 Machining of Ti–6Al–4V using diffusion annealed zinc-coated brass wire in WEDHT Vignesh M., Ramanujam R. Journal of the Brazilian Society of Mechanical Sciences and Engineering WOS 18063691
175 Flank and crater wear analysis during turning of Al 7075 based hybrid composites Ajithkumar J.P., Anthony Xavior M. Materials Research Express WOS 20531591
176 Friction based joining process for high strength aerospace aluminium alloy Nithin Joseph Reddy S.A., Sathiskumar R., Gokul Kumar K., Jerome S., Vinoth Jebaraj A., Arivazhagan N., Manikandan M. Materials Research Express WOS 20531591
177 Investigation on the fusion zone microstructures and mechanical integrity of AISI 904L and Inconel 625 weld joints Ramkumar K.D., Prabu S.S., Arivazhagan N. Materials Research Express WOS 20531591
178 Machining investigation on Ti-6Al-4V alloy using a wire electrical discharge hybrid turning (WEDHT) process Vignesh M., Ramanujam R Materials Research Express WOS 20531591
179 Role of nano second laser wavelength embedded recast layer and residual stress on electrochemical corrosion of titanium alloy Ranjith Kumar G., Rajyalakshmi G. Materials Research Express WOS 20531591
180 Weld bead temperature and residual stresses evaluations in multipass dissimilar INCONEL625 and SS316L by GTAW using IR thermography and x-ray diffraction techniques Vemanaboina H., Edison G., Akella S. Materials Research Express WOS 20531591
181 Damage Assessment and Remediation of an Iconic Lime Rendered Building Façade: The Safed Baradari Story Ghosh S., Vardhan V., Rajhans P International Journal of Architectural Heritage WOS 15583066
182 Mathematical modeling of a fractionally damped nonlinear nanobeam via nonlocal continuum approach Jha A.K., Dasgupta S.S Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science WOS 20412983
183 An investigation on CI engine characteristics using pork lard methyl ester at various injection pressures and injection timings Ashok B., Nanthagopal K., Senthil Kumar M., Ramasamy A., Patel D., Balasubramanian S., Balakrishnan S. International Journal of Green Energy WOS 15435083
184 Experimental investigations on the influence of hydrogen and LPG mixtures on performance behavior of a mahua bio oil-powered dual fuel engine Karthic S.V., Senthil Kumar M., Nataraj G., Pradeep P International Journal of Green Energy WOS 15435083
185 Thermal performance augmentation of a solar flat plate collector using the shot peening technique Poongavanam G.K., Sakthivadivel D., Meikandan M., Balaji K., Vigneswaran V.S Science and Technology for the Built Environment WOS 2374474X
186 Consequences of exhaust gas temperature on emissions in CI engine fuelled with Calophyllum inophyllum methyl ester blends with diesel Kumar L.S., Bapu B.R.R., Prakash R. Progress in Industrial Ecology Scopus 14788764
187 Dynamic analysis of functionally graded shaft Dey K., Verlekar J.R., Soni S.K., Thomas B. FME Transactions Scopus 2406128X
188 Effect of electroplating on surface roughness and dimension of FDM parts at various build orientations Sugavaneswaran M., Prince M.T., Azad A. FME Transactions Scopus 2406128X
189 Experimental investigation on a coconut coir packed humidifier for a solar desalination plant Chiranjeevi C., Srinivas T., Raj A., Shankar R. Progress in Industrial Ecology Scopus 14788764
190 Influence of thermo-electrical property of materials on Powder Mixed Electrical Discharge Machining Jeavudeen S., Siddhi Jailani H., Murugan M. FME Transactions Scopus 2406128X
191 Investigation on mechanical properties of polyurethane hybrid nanocomposite foams reinforced with roselle fibers and silica nanoparticles Soundhar A., Rajesh M., Jayakrishna K., Sultan M.T.H., Shah A.U.M. Nanocomposites Scopus 20550332
192 Vernacular architecture as an idiom for promoting cultural continuity in South Asia with a special reference to Buddhist monasteries Ghosh S., Goenka A., Deo M., Mandal D. AI and Society Scopus 14355655
193 Comprehensive review of Calophyllum inophyllum as a feasible alternate energy for CI engine applications Vigneshwar V., Krishnan S.Y., Kishna R.S., Srinath R., Ashok B., Nanthagopal K. Renewable and Sustainable Energy Reviews WOS 13640321
194 Tribological aspects of biofuels – A review Sudan Reddy Dandu M., Nanthagopal K. Fuel WOS 162361
195 Investigation on pilot injection with low temperature combustion of Calophyllum inophyllum biodiesel fuel in common rail direct injection diesel engine Susanth Kishna R., Nanthagopal K., Ashok B., Srinath R., Pranava Kumar M., Bhowmick P. Fuel WOS 162361
196 Synthesis and characterization of hydrogenated novel AlCrFeMnNiW high entropy alloy Dewangan S.K., Sharma V.K., Sahu P., Kumar V. International Journal of Hydrogen Energy WOS 3603199
197 Role of PCM based mini-channels for the cooling of multiple protruding IC chips on the SMPS board - A numerical study V K M., Hotta T.K. Journal of Energy Storage WOS 2352152X
198 Assessment of dynamic properties of hybrid ribbon reinforced multifunctional composite sandwich plates: Numerical and experimental investigation Paul Praveen A., Rajamohan V., Arumugam A.B., Rahatekar S.S. Thin-Walled Structures WOS 0263-8231
199 Effect of low concentration hollow glass microspheres on mechanical and thermomechanical properties of epoxy composites Imran M., Rahaman A., Pal S. Polymer Composites WOS 15480569
200 Selective laser melting of 316L stainless steel: Influence of TiB2 addition on microstructure and mechanical properties Salman O.O., Gammer C., Eckert J., Salih M.Z., Abdulsalam E.H., Prashanth K.G., Scudino S. Materials Today Communications WOS 23524928
201 Microstructure Evolution, Structural Integrity, and Hot Corrosion Performance of Nitrogen-Enhanced Stainless Steel Welds Devendranath Ramkumar K., Mehta N., Shukla S., Parameswar P., Jaya Surya V., Rishi Bharadwaj R., Nikam P., Chen X. Journal of Materials Engineering and Performance WOS 15441024
202 Evaluating the mechanical characteristics of aluminium alloy 2285 processed by friction stir processing Jeyapandiarajan P., Joel J., Pramesh P., Dugar N., Chandok S., Anthony Xavior M. Materials Research Express WOS 20531591
203 Impact of BaSO4 filler on woven Aloevera/Hemp hybrid composite: Dynamic mechanical analysis Arulmurugan M., Prabu K., Rajamurugan G., Selvakumar A.S. Materials Research Express WOS 20531591
204 Investigating the influence of titanium on wear characteristics of P/M hot extruded alloy steels Prabu S.S. Materials Research Express WOS 20531591
205 Design of compliant mechanism microgripper utilizing the hoekens straight line mechanism Gopal V., Alphin M.S., Bharanidaran R. Journal of Testing and Evaluation WOS 19457553
206 Vibration analysis of multiwalled carbon nanotube-reinforced composite shell: An experimental study Subramani M., Ramamoorthy M. Polymers and Polymer Composites WOS 9673911
207 Effect of Cobalt Addition on the Morphology and Mechanical Properties of W-Ni-Cu-Co Alloy Senthilnathan N., Raja Annamalai A., Venkatachalam G. Emerging Materials Research WOS 20460155
208 Influence of cutting condition on machinability aspects of inconel 718: A review paper Jeyapandiarajan P., Anthony X.M. Journal of Engineering Research (Kuwait) Scopus 23071885
209 Effect of using low-cost thermal insulation material in a solar air heating system with a shot blasted Vcorrugated absorber plate Ganesh Kumar P., Balaji K., Sakthivadivel D., Vigneswaran V.S., Meikandan M., Velraj R Thermal Science and Engineering Progress Scopus 24519049
210 Mechanical behaviour of areca nut, sunn hemp natural fibers and E-glass fibers reinforced with epoxy composites Babu T.N., Kuclourya T., Jain M.K., Mangalaraja R.V. International Journal of Engineering and Advanced Technology Scopus 22498958
211 Experimental study on thermal properties and electrical conductivity of stabilized H2O-solar glycol mixture based multi-walled carbon nanotube nanofluids: developing a new correlation Ganesh Kumar P., Sakthivadivel D., Meikandan M., Vigneswaran V.S., Velraj R. Heliyon Scopus 24058440
212 Failure analysis of strap joint Shinde M.R., S.chavan U., Deshmukh K.P. International Journal of Innovative Technology and Exploring Engineering Scopus 22783075
213 Enhancement of mechanical properties of an epoxy composite reinforced with Hibiscuss sabdariffa var. Altissima fiber micro cellulose Karakoti A., Soundhar A., Rajesh M., Jayakrishna K., Sultan M.T.B.H.H International Journal of Recent Technology and Engineering Scopus 22773878
214 4D printing of materials for the future: Opportunities and challenges Joshi S., Rawat K., C K., Rajamohan V., Mathew A.T., Koziol K., Kumar Thakur V., A.S.S B. Applied Materials Today WOS 23529407
215 Crystal growth behavior and phase stability of rare earth oxides (4 mol.% GdO1.5-4 mol.% SmO1.5) doped zirconia nanopowders Mahendran R., Manivannan S., Kumaran S.S., Vallimanalan A., Murali M., Raj S.G., Babu S.P.K. Journal of Materials Research and Technology WOS 22387854
216 IoT based framework for the detection of vehicle accident Dashora C., Sudhagar P.E., Marietta J. Cluster Computing WOS 15737543
217 Characterisation of overburden waste and industrial waste products for coal mine rehabilitation Vuppaladadiyam S.S.V., Baig Z.T., Soomro A.F., Vuppaladadiyam A.K. International Journal of Mining, Reclamation and Environment WOS 17480949
218 Numerical Analysis of Double-Diffusive Natural Convection in Shallow and Deep Open-Ended Cavities Using Lattice Boltzmann Method Arun S., Satheesh A., Chamkha A.J. Arabian Journal for Science and Engineering WOS 21914281
219 Effect of Considering Secondary Parts as Primary Parts for Robotic Assembly Using Stability Graph Gunji B.M., Deepak B.B.V.L., Biswal B.B. Arabian Journal for Science and Engineering WOS 21914281
220 Optimization on machining parameters of aluminium alloy hybrid composite using carbide insert Joel J., Anthony Xavior M. Materials Research Express WOS 20531591
221 Effect of hot corrosion on the bimetallic joints employed in the coal-fired boiler Prabu S.S., Ramkumar K.D., Arivazhagan N. Materials Research Express WOS 20531591
222 Flexural properties of areca nut, sunn hemp and e-glass fibers reinforced with epoxy composites Thamba N.B., Kuclourya T., Jain M.K., Mangalaraja R.V. Materials Research Express WOS 20531591
223 A comparative investigation of interfacial adhesion behaviour of polyamide based self-reinforced polymer composites by single fibre and multiple fibre pull-out tests Chandran M.S., Padmanabhan K., Dipin Raj D.K., Chebiyyam Y. Journal of Adhesion Science and Technology WOS 15685616
224 Microbond fibre bundle pullout technique to evaluate the interfacial adhesion of polyethylene and polypropylene self reinforced composites Sharan Chandran M., Padmanabhan K. Applied Adhesion Science Scopus 21964351
225 Food recommendation using classifier and modified Apriori algorithm Dasgupta S., Karmakar S. International Journal of Innovative Technology and Exploring Engineering Scopus 22783075
226 Experimental investigation into effects of addition of aluminium oxide on performance, combustion and emission characteristics of pongamia biodiesel blends in CI engine Avinash G.R.S., Venkat V. International Journal of Mechanical and Production Engineering Research and Development Scopus 22498001
227 Carbonaceous particle scavenging and thermal comfort augmentation with an extended green facade draped with Vernonia elaeagnifolia Kumar C.R.S., Ghosh S., Gumber S., Mishra R., Thangaraja J., Yang H. EnvironmentAsia Scopus 19061714
228 Computational simulation of fuel tank sloshing for a FSAE car using CFD techniques Ganesh Sriraam A., Badamwala M., Deb S., John B. International Journal of Recent Technology and Engineering Scopus 22773878
229 Executives perception on the association between human capital indicator and organizational performance: A special reference to pharmaceutical sector in Hyderabad Irfan M., Ravi J., Venugopal P. International Journal of Recent Technology and Engineering Scopus 22773878
230 Human capital situation in indian pharmaceutical sector Irfan M., Ravi J., Venugopal P. International Journal of Recent Technology and Engineering Scopus 22773878
231 A customer-based supply chain network design Anand T., Pandian R.S. International Journal of Enterprise Network Management Scopus 17481260
232 An investigational analysis on forecasting intraday values Manickavasagam J., Visalakshmi S. Benchmarking Scopus 14635771
233 Industry 4.0: Tools and implementation Sanghavi D., Parikh S., Raj S.A. Management and Production Engineering Review Scopus 20821344
234 Corrosion issues in electronic equipments – An overview Rathish R.J., Prabha S.S., Dorothy R., Jancyrani S., Rajendran S., Singh G., Kumaran S.S. International Journal of Corrosion and Scale Inhibition Scopus 23056894
235 Structural analysis and simulation of plga microneedle array on skin interactions for biomedical applications Chandbadshah S.B.V.J., Mannayee G. Journal of Advanced Research in Dynamical and Control Systems Scopus 1943023X
236 Version.01: Design and development soft actuator prototype for surgical lighting system Ghate S.A., Kulikovskis G International Journal of Reasoning-based Intelligent Systems Scopus 17550564
237 Validation of residual stress distributions in multipass dissimilar joints for GTAW process Vemanaboina H., Edison G., Akella S. Journal of Engineering Science and Technology Scopus 18234690
238 Tribological behaviour of phosphonium based ionic liquid blended with ZDDP Koshy G., Samad B.A., Suresh A., Shameem M., Mana A.P. Journal Europeen des Systemes Automatises Scopus 21167087
239 A blockchain-based approach for a multi-echelon sustainable supply chain Manupati V.K., Schoenherr T., Ramkumar M., Wagner S.M., Pabba S.K., Inder Raj Singh R. International Journal of Production Research WOS 1366588X
240 Investigation of mechanical properties of graphene decorated with graphene quantum dot-reinforced epoxy nanocomposite George M., Mohanty A. Journal of Applied Polymer Science WOS 10974628
241 Dynamic mechanical characteristics of jute fiber and 304 wire mesh reinforced epoxy composite Krishnasamy P., G R., M T. Journal of Industrial Textiles WOS 15308057
242 An experimental approach on Cu/CuO-Sn/SnO with graphene/MWCNT composites as a novel primary cell with an extended life span Dinakaran R., Karthikeyan S. Materials Research Express WOS 20531591
243 Corrosion behaviour of novel molten salt processed aluminium nanocomposites under different treated conditions Kannan C., Ramanujam R., Ghosh R., Kumar V., Balan A.S.S. Materials Research Express WOS 20531591
244 Experimental evaluation and numerical validation of bending and impact behaviours of hybrid composites with various stacking arrangements Margabandu S., Subramaniam S. Materials Research Express WOS 20531591
245 Oxidation and hot corrosion studies on Fe-based superalloy A-286 pulsed current GTA weldments in gas turbine environment Muthu S.M., Arivarasu M. Materials Research Express WOS 20531591
246 Studies on the effect of filler wires on micro level segregation of alloying elements in the alloy 617 weld fusion zone Mageshkumar K., Arivazhagan N., Kuppan P. Materials Research Express WOS 20531591
247 Multi-objective optimization for multi-stage sequential plastic injection molding with plating process using RSM and PCA-based weighted-GRA Sreedharan J., Jeevanantham A.K., Rajeshkannan A. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science WOS 20412983
248 Mechanical, Chemical and Morphological Analysis of Crab shell/Sisal Natural Fiber Hybrid Composites Soundhar A., Kandasamy J. Journal of Natural Fibers WOS 1544046X
249 3D printed polycarbonate reinforced acrylonitrile–butadiene–styrene composites: Composition effects on mechanical properties, micro-structure and void formation study Kumar M., Ramakrishnan R., Omarbekova A. Journal of Mechanical Science and Technology WOS 19763824
250 Influence of moving plate velocity on conjugate heat transfer due to the impingement of an inclined slot jet Pawar S., Patel D.K. International Journal of Modern Physics C WOS 17936586
251 Development of a method to compute the overall key performance index for a spinning mill to aid supply chain management Anand K.T., Rajan A.J., Bapu B.R.R. Fibres and Textiles in Eastern Europe WOS 12303666
252 A conceptual framework for the assessment of sustainability indicators using IF-THEN rules approach: A case study Jayakrishna K., Vinodh S., Vimal K.E.K. International Journal of Services and Operations Management Scopus 17442389
253 Minimizing warpage on injection molding through response surface methodology (RSM) Sreedharan J., Manimaran C., Velumani V., Muthusamy T. International Journal of Engineering and Advanced Technology Scopus 22498958
254 A Review on Electromagnetic Sheet Metal Forming of Continuum Sheet Metals Satonkar N., Gopalan V. SAE International Journal of Materials and Manufacturing Scopus 19463987
255 Consumer buying behavior and attitude towards pharmaceuticals Shekhar S.K., Jose T.P., Rehin K.R. International Journal of Research in Pharmaceutical Sciences Scopus 9757538
256 Surface hardening and wear correlations studies when turning inconel 718 Jeyapandiarajan P., Xavior M.A., Sasidharan N.C., Duchosal A. MM Science Journal Scopus 18050476
257 Comparison of hot corrosion performance of bare and nicocraly-coated austenitic stainless steel aisi 347 in aggressive waste heat incinerator environment at 6 5 0C Muthu S.M., Anant R.V., Raghul D., Ishwarya M., Arivazhagan N., Arivarasu M. Surface Review and Letters WOS 17936667
258 Experimental study on the effect of cetane improver with turpentine oil on CI engine characteristics Jeevanantham, A.K., Madhusudan Reddy, D., Goyal, N., Bansal, D., Kumar, G., Kumar, A., Nanthagopal, K., Ashok, B. Fuel WOS 162361
259 Thermodynamic and heat-hydrogen transfer analyses of novel multistage hydrogen-alloy sorption heat pump Syed S.N., Sharma V.K., Emadabathuni A.K. International Journal of Energy Research WOS 1099114X
260 Numerical investigation on the effect of flow field and landing to channel ratio on the performance of PEMFC Selvaraj, A.S., Rajagopal, T.K.R. International Journal of Energy Research WOS 1099114X
261 Sensor-assisted assessment of the tribological behavioral patterns of al-SICp composites under various environmental temperature conditions Manivannan S., Kumaran S.S., Narayanan S., Srinivasan K., Raj A.N.J. Materials WOS 19961944
262 On the microphysical processing of aged combustion aerosols impacting warm rain microphysics over Asian megacities Gumber, S., Ghosh, S., Orr, A., Sathish Kumar CR, Pope, J. Theoretical and Applied Climatology WOS 14344483
263 Experimental investigation on engine parameters variation in common rail direct injection engine fueled with biodiesel Nanthagopal K., Ashok B., Susanth Kishna R., Srinath R., Pranava Kumar M., Karthickeyan V. Clean Technologies and Environmental Policy WOS 16189558
264 Comparative study of conjugate heat transfer in a single-phase flow in wavy and raccoon microchannels Tiwari N., Moharana M.K. International Journal of Numerical Methods for Heat and Fluid Flow WOS 9615539
265 Optimization and analysis of ultrasound-assisted extraction of bioactive polyphenols from Garcinia indica using RSM and ANFIS modeling and its anticancer activity Kunjiappan, S., Panneerselvam, T., Govindaraj, S., Kannan, S., Parasuraman, P., Arunachalam, S., Sankaranarayanan, M., Baskararaj, S., Palanisamy, P., Ammunje, D.N. Journal of the Iranian Chemical Society WOS 17352428
266 Techno-economic feasibility analysis of integrating grid-tied solar PV plant in a wind farm at Harapanahalli, India Yendaluru R.S., Karthikeyan G., Jaishankar A., Babu S. Environmental Progress and Sustainable Energy WOS 19447450
267 Comparative analysis on the influence of antioxidants role with Pistacia khinjuk oil biodiesel to reduce emission in diesel engine Karthickeyan, V., Ashok, B., Thiyagarajan, S., Nanthagopal, K., Geo, V.E., Dhinesh, B. Heat and Mass Transfer/Waerme- und Stoffuebertragung WOS 14321181
268 Experimental investigation on stir and squeeze casted aluminum alloy composites reinforced with graphene Venkatesan S., Anthony Xavior M. Materials Research Express WOS 20531591
269 Study on the thermal, dielectric, and dynamic mechanical properties of graphene decorated with graphene quantum dots (GDGQD) reinforced epoxy nanocomposites George M., Mohanty A. Materials Research Express WOS 20531591
270 Hot corrosion behaviour of continuous and pulsed current gas tungsten arc welded Hastelloy X in different molten salts environment Sathishkumar M., Manikandan M. Materials Research Express WOS 20531591
271 Influence of plasma sprayed zirconia coating on surface properties of additive manufactured austenitic stainless steel 316 L Bhagade A., Gupta E., Jebaraj A.V. Materials Research Express WOS 20531591
272 Forming, fracture and corrosion behaviour of stainless steel 202 sheet formed by single point incremental forming process Vignesh G., Narayanan C.S., Pandivelan C., Shanmugapriya K., Tejavath B.N., Tirupathi L. Materials Research Express WOS 20531591
273 Compressive performance and thermal stability of alumina - Graphene nanoplatelets reinforced epoxy nanocomposites Kesavulu A., Mohanty A. Materials Research Express WOS 20531591
274 Analysis of thermal and mechanical properties of annealed surface modified nanodiamond/epoxy nanocomposites Singh B., Mohanty A. Materials Research Express WOS 20531591
275 Carbon nano-materials coating over hollow glass microspheres and its composite foam Imran M., Rahaman A., Pal S. Materials Research Express WOS 20531591
276 Study of the mechanical, dielectric, and thermal properties of annealed modified nanodiamond/epoxy composites Singh B., Mohanty A. Materials Research Express WOS 20531591
277 Effect of particle size distribution on rheology of high concentration limestone–water slurry for economic pipeline transportation Senapati S., Pothal J.K., Mohanty A. Particulate Science and Technology WOS 15480046
278 The Impingement Heat Transfer Data of Inclined Jet in Cooling Applications: A Review Pawar S., Patel D.K. Journal of Thermal Science WOS 1993033X
279 Influence of recast layer on the fatigue life of Ti6Al4V processed by electric discharge machining Eakambaram A., Xavior M.A. Archives of Metallurgy and Materials WOS 23001909
280 A meteorological discourse on extreme storm events driven by Asian slum emissions Ghosh, S., Gadian, A., Dobbie, S., Samaddar, A., Sharma, A., Chandramouli, P., Palsapure, A. International Journal of Environment and Pollution WOS 17415101
281 Comparing the tribological properties of chloride-based and tetra fluoroborate-based ionic liquids Dyaneshwar S.S., Manoj S.A., Gangadhar D.A., Balinge K.R., Mana A.P., Bhagat P.R. Annales de Chimie: Science des Materiaux Scopus 19585934
282 Novel TQWT algorithm for structural damage identification Arun Kumar K., Mallikarjuna Reddy D. International Journal of Recent Technology and Engineering Scopus 22773878
283 Design of compliant gripper for surgical applications George B L., Bharanidaran R. Australian Journal of Mechanical Engineering Scopus 22042253
284 An investigation on hot corrosion and oxidation behavior of cobalt-based superalloy L605 in the simulated aero-engine environment at various temperatures Jithesh K., Arivarasu M. Materials Research Express WOS 20531591

 

2018

Sl No Title of paper Name of the author/s Name of journal Indexed InScopus / WOS/Pub Med / ICI / Non Scopus ISSN number  
1 CFD study and experimental investigation of piston geometry induced in-cylinder charge motion on LPG fuelled lean burn spark ignition engine Ravi K., Pradeep Bhasker J., Alexander J., Porpatham E. Fuel WOS 162361  
2 Molten salt reactors and their development over the years - a review Saraf N., Devarajan A., Mokashi S.S., Rao G., Dalal V., Premkartikkumar S.R. International Journal of Mechanical and Production Engineering Research and Development Scopus 22498001  
3 Effects of water diesel emulsion on dieselengine Datta Sai K., Gopidesi R.K., Premkartikkumar S.R., Nagarjuna K. International Journal of Mechanical and Production Engineering Research and Development Scopus 22498001  
4 Numerical investigations on a biogas powered homogeneous charge compression ignition engine Adhavan K., Sathishkumar S., Mohamed Ibrahim M. International Journal of Mechanical Engineering and Technology Scopus 9766340  
5 Influence of sintering temperature on mechanical properties of spark plasma sintered prealloyed Ti-6Al-4 v powder Muthuchamy A., Patel P., Rajadurai M., Chaurisiya J.K., Annamalai A.R. Materialpruefung/Materials Testing WOS 2195-8572  
6 Effect of Sn addition on the microstructural characteristics and mechanical properties of the titanium alloy (Ti6Al4V) Rajadurai M., Annamalai A.R. Kovove Materialy WOS 0023432X  
7 Microstructural Evolution of Iron Based Alloys Produced by Spark Plasma Sintering Method Muthuchamy A., Annamalai A.R., Karthikeyan M., Thakur A., Nagaraju N., Agrawal D.K. Physics of Metals and Metallography WOS 0031918X  
8 Machinability study of developed composite AA6061-ZrO2 and analysis of influence of MQL James S.J., Annamalai A.R. Metals WOS 2075-4701  
9 Recent developments in investigation on buckling and post buckling responses of laminated composite shells Praveen A P., Rajamohan V., Mathew A.T. Polymer Composites WOS 2728397  
10 Assessment of drilling-induced damage in CFRP under chilled air environment Abish J., Samal P., Narenther M.S., Kannan C., Balan A.S.S. Materials and Manufacturing Processes WOS 1532-2475  
11 Effect of La2O3 addition and sintering mode on the mechanical properties and microstructural evolution on an 8YSZ ceramic alloy Muthuchamy, A., Nagaraju, N., Agrawal, D.K., Annamalai, A.R. Ceramics International WOS 0272-8842  
12 Structural optimization of tapered composite sandwich plates partially treated with magnetorheological elastomers Vemuluri R.B., Rajamohan V., Sudhagar P.E. Composite Structures WOS 2638223  
13 Optimal pricing and inventory decisions in a centralised and de-centralised two-echelon inventory system under nonlinear price dependent demand Nagaraju D., Kumar K.K., Narayanan S. International Journal of Logistics Systems and Management Scopus 17427967  
14 Integration of lean, Six Sigma and theory of constraints for productivity improvement of mining industry Rajini J., Nagaraju D., Narayanan S. International Journal of Productivity and Quality Management Scopus 17466474  
15 Biochemical responses from biomass of isolated Chlorella sp., under different cultivation modes: Non-linear modelling of growth kinetics Praveen K., Abinandan S., Natarajan R., Kavitha M.S. Brazilian Journal of Chemical Engineering WOS 1046632  
16 Performance investigation of Kalina cooling cogeneration cycles Shankar R., Srinivas T. International Journal of Refrigeration WOS 0140-7007  
17 A human whole blood chemically modified electrode for the hydrogen peroxide reduction and sensing: Real-time interaction studies of hemoglobin in the red blood cell with hydrogen peroxide Amreen K., Kumar A.S. Journal of Electroanalytical Chemistry WOS 15726657  
18 In-situ electrochemical immobilization of [Mn(bpy)2(H2O)2]2+ complex on MWCNT modified electrode and its electrocatalytic H2O2 oxidation and reduction reactions: A Mn-Pseudocatalase enzyme bio-mimicking electron-transfer functional model Saravanan N., Mayuri P., Huang S.-T., Kumar A.S. Journal of Electroanalytical Chemistry WOS 15726657  
19 Bio-electrocatalytic reduction of dissolved oxygen by whole blood chemically modified electrode and its application Amreen K., Kumar A.S. Journal of Electroanalytical Chemistry WOS 15726657  
20 Novel cooling augmented cogeneration cycle [Nouveau cycle de cogénération à refroidissement augmenté] Sharkar R., Srinivas T. International Journal of Refrigeration WOS 0140-7007  
21 A blood-serum sulfide selective electrochemical sensor based on a 9,10-phenanthrenequinone-tethered graphene oxide modified electrode Shalini Devi K.S., Senthil Kumar A. Analyst WOS 32654  
22 A bipotentiostat based separation-free method for simultaneous flow injection analysis of chromium (III) and (VI) species Nellaiappan S., Kumar A.S. Electrochimica Acta WOS 134686  
23 A new organic redox species-indole tetraone trapped MWCNT modified electrode prepared by in-situ electrochemical oxidation of indole for a bifunctional electrocatalysis and simultaneous flow injection electroanalysis of hydrazine and hydrogen peroxide Mayuri P., Huang S.-T., Mani V., Kumar A.S. Electrochimica Acta WOS 134686  
24 Selective amperometric and flow injection analysis of 1,2-dihydroxy benzene isomer in presence of 1,3- and 1,4-dihydroxy benzene isomers using palladium nanoparticles-chitosan modified ITO electrode Nellaiappan S., Kumar A.S. Sensors and Actuators, B: Chemical WOS 0925-4005  
25 Selective electrochemical polymerization of 1-napthylamine on carbon electrodes and its pH sensing behavior in non-invasive body fluids useful in clinical applications Vishnu N., Kumar A.S., Pan G.-T., Yang T.C.-K. Sensors and Actuators, B: Chemical WOS 0925-4005  
26 Detoxification of dyes by aspergillus Niger isolated from dye contaminated soil effluent from the sites of textile industry Ranjitha J., Shalini P., Anand M., Raghavendra S.G. Research Journal of Chemistry and Environment Scopus 9720626  
27 Investigation of Solar Cooling Cogeneration Plant Shankar R., Srinivas T., Reddy B.V. Applied Solar Energy (English translation of Geliotekhnika) Scopus 0003701X  
28 Effect of Inlet Air Humidity on Performance of Solar Hybrid Combined Cycle Power Plant Samuel V., Srinivas T., Reddy B.V. Applied Solar Energy (English translation of Geliotekhnika) Scopus 0003701X  
29 Biodiesel production from waste animal fat using a novel catalyst HCA immobilized AuNPS amine grafted SBA-15 Srinivasan G.R., Palani S., Jambulingam R. Journal of Engineering Science and Technology Scopus 18234690  
30 A review on performance, emission and combustion characteristics of a diesel engine fuelled with various vegetable oil Asokan M.A., Vijayan R., Senthur Prabu S. Indian Journal of Chemical Technology WOS 0975-0991  
31 Effect of TiC Addition and Heating Mode on the Electrochemical Response of Powder Metallurgy Processed Corrosion-Resistant Austenitic and Ferritic Steels Muthuchamy A., Raja Annamalai A. Metal Science and Heat Treatment WOS 1573-8973  
32 Experimental investigation of mixed convection and surface radiation heat transfer from protruding discrete heat sources mounted on a vertical channel Hotta T.K., Harsha P.S., Venkateshan S.P. Heat Transfer Research WOS 2162-6561  
33 Optimization of cryo-treated EDM variables using TOPSIS-based TLBO algorithm Mohanty C.P., Satpathy M.P., Mahapatra S.S., Singh M.R. Sadhana - Academy Proceedings in Engineering Sciences WOS 0973-7677  
34 Thermal Stability of Cathodic Arc Vapour Deposited TiAlN/AlCrN and AlCrN/TiAlN Coatings on Tungsten Carbide Tool Sampath Kumar T., Balasivanandha Prabu S., Madhavan S., Padmanabhan K.A. Transactions of the Indian Institute of Metals WOS 0972-2815  
35 Multi Response Optimization and Experimental Investigations into the Impact of Wire EDM on the Tribological Properties of Ti–6Al–4V Kuriachen B., Lijesh K.P., Kuppan P. Transactions of the Indian Institute of Metals WOS 0972-2815  
36 Investigation of metallurgical and mechanical properties of 21st century nickel-based superalloy 686 by electron beam welding technique Arulmurugan B., Agilan M., Jerome S., Arivarasu M., Manikandan M., Srikanth A., Arivazhagan N. Sadhana - Academy Proceedings in Engineering Sciences WOS 0973-7677  
37 Surface modification technique to enhance metallurgical and mechanical properties of alloy C-276 weldment by laser shock peening without coating Nithin Joseph Reddy S.A., Thrinadh E., Prabhakaran S., Kalainathan S., Arivazhagan N., Manikandan M. Sadhana - Academy Proceedings in Engineering Sciences WOS 0973-7677  
38 Role of working fluids on the cooling of discrete heated modules: a numerical approach Patil N.G., Hotta T.K. Sadhana - Academy Proceedings in Engineering Sciences WOS 0973-7677  
39 Microstructural and electrochemical behaviour of aluminium alloy composites produced using different sintering techniques Muthuchamy A., Annamalai A.R., Acharyya S.G., Nagaraju N., Agrawal D.K. Materials Research WOS 15161439  
40 Characterization of TiCN coating synthesized by the plasma enhanced physical vapour deposition process on a cemented carbide tool Kumar T.S., Jebaraj A.V., Sivakumar K., Shankar E., Tamiloli N. Surface Review and Letters WOS 0218625X  
41 ENHANCEMENT of EXFOLIATION CORROSION RESISTANCE of ALUMINIUM ALLOY 5083 by SHOT PEENING Jebaraj A.V., Ajaykumar L., Deepak C.R., Aditya K.V.V. Surface Review and Letters WOS 0218625X  
42 Tribological behaviour and wear fashion of processed AA6061/ZrO2 composite James J., Raja Annamalai A. Industrial Lubrication and Tribology WOS 368792  
43 Effect of particle size distribution on rheology of high concentration limestone–water slurry for economic pipeline transportation Senapati S., Pothal J.K., Mohanty A. Particulate Science and Technology WOS ‎0272-6351  
44 Studies on testing and modelling of formability in aluminium alloy sheet forming Subramani K., Alagarsamy S.K., Chinnaiyan P., Chinnaiyan S.N. Transactions of Famena WOS 13331124  
45 Improvement of Metallurgical and Mechanical Properties of Gas Tungsten arc Weldments of Alloy 686 by Current Pulsing Arulmurugan B., Manikandan M. Transactions of the Indian Institute of Metals WOS 9722815  
46 Investigation of Structure Property Relationship of the Dissimilar Weld Between Austenitic Stainless Steel 316L and Duplex Stainless Steel 2205 Vinoth Jebaraj A., Sampath Kumar T., Manikandan M. Transactions of the Indian Institute of Metals WOS 9722815  
47 Application of EMD ANN and DNN for self-aligning bearing fault diagnosis Narendiranath Babu T., Aravind A., Rakesh A., Jahzan M., Rama Prabha D. Archives of Acoustics WOS 0137-5075  
48 Characterization of microfiber isolated from Hibiscus sabdariffa var. altissima fiber by steam explosion Karakoti A., Biswas S., Aseer J.R., Sindhu N., Sanjay M.R. Journal of Natural Fibers WOS 15440478  
49 Mesoscopic analysis of heatline and massline during double-diffusive MHD natural convection in an inclined cavity Sathiyamoorthi A., Anbalagan S. Chinese Journal of Physics WOS 5779073  
50 Co-combustion analysis of lignite coal and groundnut shell using TGA Sakthivel C., Gopal P., Rameshkumar C., Suresh Kumar B. Journal of Applied Fluid Mechanics WOS 17353572  
51 Dynamic characterization of the thickness-tapered laminated plant fiber-reinforced polymer composite plates Suthenthiraveerappa V., Gopalan V., Arumugam A.B., Ramasamy B. Advanced Composite Materials WOS ‎0924-3046  
52 Analysis of structure property relationship of super duplex stainless steel AISI 2507 weldments for severe corrosive environments Paranthaman V., Shanmuga Sundaram K., Jebaraj A.V. Materials Research Express WOS 20531591  
53 Characterization of microstructure and mechanical properties of nickel based superalloy 617 by pulsed current gas tungsten arc welding technique Mageshkumar K., Kuppan P., Arivazhagan N. Materials Research Express WOS 20531591  
54 Mechanical and tribological behaviour of molten salt processed self-lubricated aluminium composite under different treatments Kannan C., Ramanujam R. Materials Research Express WOS 20531591  
55 Drilling performances and wear characteristics of coated drill bits during drilling reinforced concrete Sathish S., Ramkumar S., Geetha M. International Journal of Applied Ceramic Technology WOS 1546542X  
56 Investigations on pool boiling critical heat flux, transient characteristics and bonding strength of heater wire with aqua based reduced graphene oxide nanofluids Kamatchi R., Kumaresan G. Chinese Journal of Chemical Engineering WOS 1004-9541  
57 The role of perceived benefits and personality traits on mobile instant messaging users’ responses Padmavathy, C., Lee, S., Pattusamy, M., Dey, M.K., Swapana, M. Asia Pacific Journal of Marketing and Logistics WOS 1355-5855  
58 Experimental investigations on nucleate boiling heat transfer of aqua based reduced graphene oxide nanofluids Kamatchi R. Heat and Mass Transfer/Waerme- und Stoffuebertragung WOS 0947-7411  
59 Dynamic behaviour of woven bio fiber composite Rajesh M., Sultan M.T.H., Uthayakumar M., Jayakrishna K., Shah A.U.M. BioResources WOS 19302126  
60 Influence of Exhaust Gas Recirculation on Combustion and Emission Characteristics of Diesel Engine Fuelled with 100% Waste Cooking Oil Methyl Ester Nanthagopal K., Raj R.T.K., Ashok B., Elango T., Saravanan S.V. Waste and Biomass Valorization WOS 1877-2641  
61 Toward the design of interstitial nonmetals co-doping for Mg-based hydrides as hydrogen storage material Wu Z., Zhu L., Yang F., Nyamsi S.N., Porpatham E., Zhang Z. Journal of Materials Research WOS 8842914  
62 Concentrated energy addition for active drag reduction in hypersonic flow regime Ashwin Ganesh M., John B. Acta Astronautica WOS 945765  
63 Austenite reversion in 18% Ni maraging steel and its weldments Rohit B., Muktinutalapati N.R. Materials Science and Technology (United Kingdom) WOS 2670836  
64 Experimental investigation on physical and mechanical properties of lime mortar: Effect of organic addition Thirumalini S., Ravi R., Rajesh M. Journal of Cultural Heritage WOS 1296-2074  
65 Liquid – Liquid horizontal pipe flow – A review Ahmed S.A., John B. Journal of Petroleum Science and Engineering WOS 9204105  
66 Thermoelastic Stability Behavior of Curvilinear Fiber-Reinforced Composite Laminates With Different Boundary Conditions Manickam G., Bharath A., Das A.N., Chandra A., Barua P. Polymer Composites WOS 2728397  
67 Effect of heating mode on sinterability of YSZ+CeO2 ceramics Raja Annamalai A., Nagaraju N., Agrawal D.K., Muthuchamy A. Metals WOS 2075-4701  
68 Nonlinear Free Flexural Vibration of Curvilinear Fibre Composite Laminates Using a Higher-Order Element Ganapathi M., Venkatachari A., Haboussi M., Mathew A.T. International Journal of Structural Stability and Dynamics WOS 2194554  
69 Semi-active vibration control of an 8x8 armored wheeled platform Trikande M.W., Karve N.K., Anand Raj R., Jagirdar V.V., Vasudevan R. JVC/Journal of Vibration and Control WOS 10775463  
70 Elastic stability of curved nanobeam based on higher-order shear deformation theory and nonlocal analysis by finite element approach Polit O., Merzouki T., Ganapathi M. Finite Elements in Analysis and Design WOS ‎0168-874X  
71 A DEMATEL approach for evaluating barriers for sustainable end-of-life practices K S., R J., K.E.K V., Ravi P. Journal of Manufacturing Technology Management WOS 1741038X  
72 Analysis of network design for a circular production system using multi-objective mixed integer linear programming model Vimal K.E.K., Rajak S., Kandasamy J. Journal of Manufacturing Technology Management WOS 1741038X  
73 Experimental study on effect of wick structures on thermal performance enhancement of cylindrical heat pipes Kumaresan, G., Vijayakumar, P., Ravikumar, M., Kamatchi, R., Selvakumar, P. Journal of Thermal Analysis and Calorimetry WOS 1388-6150  
74 Investigation of TiAlN coated roller burnishing on Al-(B4C)p MMC workpiece material Shankar E., Balasivanandha Prabu S., Kumar T.S., John M.R.S. Materials and Manufacturing Processes WOS 1042-6914  
75 Effect of ceramic reinforcements on microwave sintered metal matrix composites Ashwath P., Xavior M.A. Materials and Manufacturing Processes WOS 1042-6914  
76 Encapsulation and microwave hybrid processing of Al 6061–Graphene–SiC composites Prashantha Kumar H.G., Anthony Xavior M. Materials and Manufacturing Processes WOS 1042-6914  
77 Machinability studies on Al 7075/BN/Al2O3 squeeze cast hybrid nanocomposite under different machining environments Kannan C., Ramanujam R., Balan A.S.S. Materials and Manufacturing Processes WOS 1042-6914  
78 Ultrasonication and microwave processing of aluminum alloy- Graphene - Al2O3 nanocomposite Kumar H.G.P., Xavior M.A., Ashwath P. Materials and Manufacturing Processes WOS 1042-6914  
79 Comparative evaluation of performances of TiAlN, AlCrN, TiAlN/AlCrN coated carbide cutting tools and uncoated carbide cutting tools on turning Inconel 825 alloy using Grey Relational Analysis T. S.K., Ramanujam R., Vignesh M., Tamiloli N., Sharma N., Srivastava S., Patel A. Sensors and Actuators, A: Physical WOS ‎0924-4247  
80 A sensitivity study of diffusional mass transfer of gases in tropical storm hydrometeors Ghosh S., Gumber S., Varotsos C. Theoretical and Applied Climatology WOS 0177-798X  
81 Development of improved microstructural traits and mechanical integrity of stabilized stainless steel joints of AISI 321 Devendranath Ramkumar K., Pavan B., Chandrasekar V. Journal of Manufacturing Processes WOS 1526-6125  
82 Investigations on the microstructure and mechanical properties of dissimilar welds of inconel 718 and sulphur rich martensitic stainless steel, AISI 416 Dev S., Ramkumar K.D., Arivazhagan N., Rajendran R. Journal of Manufacturing Processes WOS 1526-6125  
83 Additive manufactured multi-material structure with directional specific mechanical properties based upon classical lamination theory Sugavaneswaran M., Arumaikkannu G. Rapid Prototyping Journal WOS 13552546  
84 A nonlocal higher-order model including thickness stretching effect for bending and buckling of curved nanobeams Ganapathi M., Polit O. Applied Mathematical Modelling WOS 0307904X  
85 Drilling on fiber reinforced polymer/nanopolymer composite laminates: A review Panchagnula K.K., Palaniyandi K. Journal of Materials Research and Technology WOS 22387854  
86 Improvement in the mechanical properties of neat GFRPs with multi-walled CNTs Panchagnula K.K., Kuppan P. Journal of Materials Research and Technology WOS 22387854  
87 An effective hybrid multi objective evolutionary algorithm for solving real time event in flexible job shop scheduling problem Sreekara Reddy M.B.S., Ratnam C., Rajyalakshmi G., Manupati V.K. Measurement: Journal of the International Measurement Confederation WOS 0263-2241  
88 Liquid - Liquid horizontal pipe flow - A review Ahmed S.A., John B. Journal of Petroleum Science and Engineering WOS 9204105  
89 Natural convection heat transfer and fluid flow analysis in a 2D square enclosure with sinusoidal wave and different convection mechanism Pichandi P., Anbalagan S. International Journal of Numerical Methods for Heat and Fluid Flow WOS 9615539  
90 High-temperature corrosion behaviour of air plasma sprayed Cr3C2-25NiCr and NiCrMoNb powder coating on alloy 80A at 900 °C Sreenivasulu V., Manikandan M. Surface and Coatings Technology WOS 1879-3347  
91 Investigations on performance characteristics of GFRP composites in milling Prasanth I.S.N.V.R., Ravishankar D.V., Hussain M.M., Badiganti C.M., Sharma V.K., Pathak S. International Journal of Advanced Manufacturing Technology WOS 2683768  
92 Experimental investigation of IN725 under different cooling environments using new tool holder Gupta S., Venkatesan K., Devendiran S., Mathew A.T. Materials and Manufacturing Processes WOS 10426914  
93 Mitigation of NOx and smoke emissions in a diesel engine using novel emulsified lemon peel oil biofuel Bragadeshwaran A., Kasianantham N., Balusamy S., Muniappan S., Reddy D.M.S., Subhash R.V., Pravin N.A., Subbarao R. Environmental Science and Pollution Research WOS 9441344  
94 Experimental study of methyl tert-butyl ether as an oxygenated additive in diesel and Calophyllum inophyllum methyl ester blended fuel in CI engine Bragadeshwaran A., Kasianantham N., Ballusamy S., Tarun K.R., Dharmaraj A.P., Kaisan M.U. Environmental Science and Pollution Research WOS 9441344  
95 Development of welding technique to suppress the microsegregation in the aerospace grade alloy 80A by conventional current pulsing technique Subramani P., Manikandan M. Journal of Manufacturing Processes WOS 15266125  
96 Dynamic characterization and parametric instability analysis of rotating magnetorheological fluid composite sandwich plate subjected to periodic in-plane loading Arumugam A.B., Ramamoorthy M., Rajamohan V., S M., S R.K. Journal of Sandwich Structures and Materials WOS 1099-6362  
97 Dynamic characterization of tapered laminated composite sandwich plates partially treated with magnetorheological elastomer Vemuluri R.B., Rajamohan V., Arumugam A.B. Journal of Sandwich Structures and Materials WOS 1099-6362  
98 A multi-criteria decision making approach for the urban renewal in Southern India Manupati V.K., Ramkumar M., Samanta D. Sustainable Cities and Society WOS 22106707  
99 Microstructure and mechanical properties of spark plasma sintered tungsten heavy alloys Senthilnathan N., Annamalai A.R., Venkatachalam G. Materials Science and Engineering A WOS 0921-5093  
100 Effectiveness evaluation of molten salt processing and ultrasonic cavitation techniques during the production of aluminium based hybrid nanocomposites - An experimental investigation Kannan C., Ramanujam R. Journal of Alloys and Compounds WOS 0925-8388  
101 A review of Internet of Things (IoT) embedded sustainable supply chain for industry 4.0 requirements Manavalan, E., Jayakrishna, K. Computers and Industrial Engineering WOS 0360-8352  
102 Thermodynamic simulation of hydrogen based solid sorption heat transformer Sharma V.K., Kumar E.A. International Journal of Thermal Sciences WOS 1290-0729  
103 A novel approach to predict the delamination factor for dry and cryogenic drilling of CFRP Joshi S., Rawat K., A.S.S B. Journal of Materials Processing Technology WOS 9240136  
104 Effect of activated flux on penetration depth, microstructure and mechanical properties of Ti-6Al-4V TIG welds Ramkumar K.D., Varma V., Prasad M., Rajan N.D., Shanmugam N.S. Journal of Materials Processing Technology WOS 9240136  
105 A comparative assessment on Common Rail Direct Injection (CRDI) engine characteristics using low viscous biofuel blends Ashok B., Nanthagopal K., Chaturvedi B., Sharma S., Thundil Karuppa Raj R. Applied Thermal Engineering WOS 13594311  
106 Determination of physico chemical properties of biodiesel from Citrullus lanatus seeds oil and diesel blends Sani S., Kaisan M.U., Kulla D.M., Obi A.I., Jibrin A., Ashok B. Industrial Crops and Products WOS 0926-6690  
107 Mesoscopic analysis of MHD double diffusive natural convection and entropy generation in an enclosure filled with liquid metal Arun, S., Satheesh, A. Journal of the Taiwan Institute of Chemical Engineers WOS 1876-1070  
108 Variable stiffness laminated composite shells – Free vibration characteristics based on higher-order structural theory Venkatachari A., Natarajan S., Ganapathi M. Composite Structures WOS 2638223  
109 Vibration study of curved nanobeams based on nonlocal higher-order shear deformation theory using finite element approach Ganapathi M., Merzouki T., Polit O. Composite Structures WOS 2638223  
110 Studies on seasonal pollution of heavy metals in water, sediment, fish and oyster from the Meiliang Bay of Taihu Lake in China Rajeshkumar S., Liu Y., Zhang X., Ravikumar B., Bai G., Li X. Chemosphere WOS 0045-6535  
111 Effect of additives on performance, combustion and emission behavior of preheated palm oil/diesel blends in DI diesel engine Senthur Prabu S., Asokan M.A., Prathiba S., Ahmed S., Puthean G. Renewable Energy WOS 9601481  
112 Experimental and theoretical studies of various solar control window glasses for the reduction of cooling and heating loads in buildings across different climatic regions G K.K., Saboor S., Kumar V., Kim K.-H., Babu T. P. A. Energy and Buildings WOS 0378-7788  
113 Experimental studies on the effects of enhancing the concentration of oxygen in the inducted charge of a biogas fuelled spark ignition engine Porpatham E., Ramesh A., Nagalingam B. Energy WOS 0360-5442  
114 Performance, combustion and emission characteristics of diesel engine fuelled with papaya and watermelon seed oil bio-diesel/diesel blends Asokan M.A., Senthur prabu S., Kamesh S., Khan W. Energy WOS 0360-5442  
115 Impact behaviour of hybrid composites for structural applications: A review Safri S.N.A., Sultan M.T.H., Jawaid M., Jayakrishna K. Composites Part B: Engineering WOS 1359-8368  
116 Development and performance comparison of mixed-mode solar crop dryers with and without thermal storage Abubakar S., Umaru S., Kaisan M.U., Umar U.A., Ashok B., Nanthagopal K. Renewable Energy WOS 9601481  
117 Thin layer drying kinetics and exergy analysis of turmeric (Curcuma longa) in a mixed mode forced convection solar tunnel dryer Karthikeyan A.K., Murugavelh S. Renewable Energy WOS 9601481  
118 Applied and Theoretical Aspects of Conjugate Heat Transfer Analysis: A Review John B., Senthilkumar P., Sadasivan S. Archives of Computational Methods in Engineering WOS 11343060  
119 An assessment on the effects of 1-pentanol and 1-butanol as additives with Calophyllum Inophyllum biodiesel Nanthagopal K., Ashok B., Saravanan B., Patel D., Sudarshan B., Aaditya Ramasamy R. Energy Conversion and Management WOS 0196-8904  
120 An experimental study on the effect of nanoparticles with novel tamarind seed methyl ester for diesel engine applications Dhana Raju V., Kishore P.S., Nanthagopal K., B.Ashok Energy Conversion and Management WOS 0196-8904  
121 Effect of next generation higher alcohols and Calophyllum inophyllum methyl ester blends in diesel engine Nanthagopal K., Ashok B., Saravanan B., Korah S.M., Chandra S. Journal of Cleaner Production WOS 9596526  
122 A novel study on the effect lemon peel oil as a fuel in CRDI engine at various injection strategies Ashok B., Nanthagopal K., Saravanan B., Somasundaram P., Jegadheesan C., Chaturvedi B., Sharma S., Patni G. Energy Conversion and Management WOS 0196-8904  
123 Design and simulation of modular casts for wrist injury Singh A. International Journal of Mechanical Engineering and Technology Scopus 9766340  
124 Effect of an additive in karanja biodiesel blends on the performance and emission characteristics of diesel engines Babu N.T., Praneeth V.S. International Journal of Mechanical Engineering and Technology Scopus 9766340  
125 Fabrication and automation of seed sowing machine using IoT Senthilnathan N., Gupta S., Pureha K., Verma S. International Journal of Mechanical Engineering and Technology Scopus 9766340  
126 Enhanced surface and mechanical properties of bioinspired nanolaminate graphene-aluminum alloy nanocomposites through laser shock processing for engineering applications H.G P.K., S P., M A.X., S K., Lin D., Shukla P., Vasudevan V.K. Materials Today Communications Scopus 23524928  
127 Thermal buckling behaviour of variable stiffness laminated composite plates Manickam G., Bharath A., Das A.N., Chandra A., Barua P. Materials Today Communications Scopus 23524928  
128 Enhancement of surface characteristics of direct metal laser sintered stainless steel 316L by shot peening Sugavaneswaran M., Jebaraj A.V., Kumar M.D.B., Lokesh K., Rajan A.J. Surfaces and Interfaces Scopus 24680230  
129 Experimental Study on Performance Enhancement of Evacuated Tube by Constant Heat Flux Mode Challa G.R., Natarajan M., Palayakkodan A. Applied Solar Energy (English translation of Geliotekhnika) Scopus 0003-701X  
130 Determination of stress intensity factors of jute fiber-reinforced hybrid polymer-matrix composites Prabaharan Graceraj P., Venkatachalam G., Garg A.S., Akhil Afsan M. Composites: Mechanics, Computations, Applications Scopus 2152-2057  
131 Investigation on the effect of injection pressures on the spray characteristics for diethyl ether and diesel fuel at different chamber temperatures Thulasi V., Thundil Karuppa Raj R. Frontiers in Heat and Mass Transfer Scopus 2151-8629  
132 Enhanced heat transfer by thermosyphon method in electronic devices Kannan K.G., Kamatchi R., Venkatajalapathi T., Krishnan A.S. International Journal of Heat and Technology Scopus 3928764  
133 Thermal and cost analysis of float and various tinted double window glass configurations on heat gain into buildings of hot & dry climatic zone in India Gorantla K., Shaik S., Setty A.B.T.P.R. International Journal of Heat and Technology Scopus 3928764  
134 Active vibration control of composite beam Babu R.V., Prasanth T., Chowdary Y., Reddy V. International Journal of Mechanical Engineering and Technology Scopus 0976 – 6340  
135 Comparative study on orientation of fibers in epoxy composites reinforced with aloe-vera and palmyra fibers Narendiranath Babu T., Tarun K.S., Bandaru S., Vattikuti M. International Journal of Mechanical Engineering and Technology Scopus 0976 – 6340  
136 Deformation behaviour of magnesium alloy with varying strain rate and tested at room temperature condition Kumar S., Kanth B.S.S., Kumar P. International Journal of Mechanical Engineering and Technology Scopus 0976 – 6340  
137 Design and analysis of a new airfoil for rc aircrafts and uavs Premkartikkumar S.R., Ashok V., Bhabhra A.R., Beladiya A. International Journal of Mechanical Engineering and Technology Scopus 0976 – 6340  
138 Design and analysis of human powered hybrid vehicle Singh K., Iyengar M.S., Iyengar N.S., Denis Ashok S. International Journal of Mechanical Engineering and Technology Scopus 0976 – 6340  
139 Design of active and adaptive suspension system with pneumatic cylinder Desharth International Journal of Mechanical Engineering and Technology Scopus 0976 – 6340  
140 Design of fins to maximize the heat transfer rate from the engine cylinder kumar Hotta T., Sajja R.N., Sigireddy R.T., Mugala V.S. International Journal of Mechanical Engineering and Technology Scopus 0976 – 6340  
141 Experimental study on performance of steam condenser in 600mw singareni thermal power plant Senthur Prabu S., Manichandra M., Bhanu Prakash Reddy G., Raghu Vamshi D., Veera Bramham P. International Journal of Mechanical Engineering and Technology Scopus 0976 – 6340  
142 Investigation of steady state forced convection heat transfer in a nanofluid cooled circular pipe Kumar A., Kumar A., Kumar S., Govindha Rasu N. International Journal of Mechanical Engineering and Technology Scopus 0976 – 6340  
143 Investigation on mechanical behaviour of glass fiber reinforced with polyurethane foam and honeycomb Manidhar D.V., Krishna S., Vishnu Prakash V., Deepa A. International Journal of Mechanical Engineering and Technology Scopus 0976 – 6340  
144 Mechanical behaviour of copper alloy with different Strain Rate at Room temperature Galgat C., Agrawal P., Meraj M., Kumar P. International Journal of Mechanical Engineering and Technology Scopus 0976 – 6340  
145 Stress and thermal analysis of clutch plate Singhal U., Kumar R., Shursen G.S., Baskar P. International Journal of Mechanical Engineering and Technology Scopus 0976 – 6340  
146 Study on influence of machinability characteristics in machining of nimonic 90A alloy using copper oxide nanofluid in MQL mode Venkatesan K., Devendiran S., Thakur A., Ashish Chauhan V., Pavan Kalyan P.V. International Journal of Mechanical Engineering and Technology Scopus 0976 – 6340  
147 Study on mechanical and tribological behaviour of Angora, kenaf and ramie hybrid reinforced epoxy composites Narendiranath Babu T., Aravind S.S., Naveen Kumar K.S., Sumanth Rao M.S. International Journal of Mechanical Engineering and Technology Scopus 0976 – 6340  
148 Study on mechanical and tribological behaviour of sisal, abaca and sun-hemp hybrid reinforced epoxy composites Narendiranath Babu T., Talla H.K., Kokkirala S., Batta K. International Journal of Mechanical Engineering and Technology Scopus 0976 – 6340  
149 Design and analysis of dental surgical fixture Suhas H.G., Rajkumar International Journal of Pure and Applied Mathematics Scopus 1311-8080  
150 Finite element investigation on mode I crack tip characteristics in residually stressed glare Bhat S., Narayanan S. International Journal of Structural Integrity Scopus 1757-9864  
151 Active camber and toe control strategy for the double wishbone suspension system Kavitha C., Shankar S.A., Karthika K., Ashok B., Ashok S.D. Journal of King Saud University - Engineering Sciences Scopus 1018-3639  
152 A study on work life balance of female pharmacists working in private hospitals Shekhar S.K., Jose T.P., Sudhakar R. Research Journal of Pharmacy and Technology Scopus 0974-3618  
153 Analysis of tensile and flexural strengths of kenaf fabricreinforced hybrid polymer matrix composite Venkatachalam G., Vignesh P., Banarjee D., Karmakar S., Reddy D.M. Composites: Mechanics, Computations, Applications Scopus 21522057  
154 Causal linkage between stock markets: International evidence Visalakshmi S., Manickavasagam J. International Journal of Mechanical Engineering and Technology Scopus 9766340  
155 Design and analysis of secure data enhancement in a digital manufacturing system Mannayee G., Pandivelan C., Boopathi M., Ponnusamy P., Mannayee V. International Journal of Mechanical Engineering and Technology Scopus 9766340  
156 Development of a lap-time simulator for a FSAE race car using multi-body dynamic simulation approach Singh C., Palanivelu S. International Journal of Mechanical Engineering and Technology Scopus 9766340  
157 Impact of rising air pollution in New Delhi: An empirical study Seema A., Sood A., Bhalla S., Bajpai S. International Journal of Mechanical Engineering and Technology Scopus 9766340  
158 Impact of social plug-in options on consumer purchase intention: A special reference to facebook users Venugopal P., Aswini Priya S., Sathish A.S., Anjani Devi S. International Journal of Mechanical Engineering and Technology Scopus 9766340  
159 The mediating effect of tangibility and reliability in the patients perception of healthcare quality on patients satisfaction using Bayesian approach Ravikumar B., Subbiah M., Sriram G. International Journal of Mechanical Engineering and Technology Scopus 9766340  
160 Cylinder head bolts tightening strategies parameters finalization by Taguchi method for multi cylinder engines Marathe A.V., Venkatachalam G., Marathe N.V. International Review of Mechanical Engineering Scopus 19708734  
161 Experimental investigations on flexural and fracture behaviors of flax fiber reinforced sandwich panels Venkatachalam G., Mehta N., Shukla S., Gupta Y., Sharma A., Ghosh R., Rajan G. International Review of Mechanical Engineering Scopus 19708734  
162 Advanced liquid state processing techniques for ex-situ discontinuous particle reinforced nanocomposites: A review Kannan C., Ramanujam R. Science and Technology of Materials Scopus 2603-6363  
163 Tensile behavior of aluminum alloy (AA7050) metal matrix composite reinforced with graphene fabricated by stir and squeeze cast processes Venkatesan S., Anthony Xavior M. Science and Technology of Materials Scopus 2603-6363  
164 Flexural and fracture analysis of polymer metal hybrid composite panels reinforced with natural fibers Kazi A., Dam R., Datta S., Venkatachalam G., Rajan G. UPB Scientific Bulletin, Series B: Chemistry and Materials Science Scopus 14542331  
165 Comparative analyses of biodiesel produced from jatropha and neem seed oil using a gas chromatography–mass spectroscopy technique Kaisan M.U., Abubakar S., Ashok B., Balasubramanian D., Narayan S., Grujic I., Stojanovic N. Biofuels Scopus 17597269  
166 Finite element analysis of composites under different load conditions with the effect of hybridization of glass reinforcement on Kevlar fibres Paul A.J., Gnanaraj S.D. International Journal of Mechanical Engineering and Technology Scopus 9766340  
167 Novel method of improving the team goals performance level using lean and six Sigma: A case study problem Rajini J., Nagaraju D., Narayanan S. International Journal of Mechanical Engineering and Technology Scopus 9766340  
168 NSGA optimization of performance of EDM using powder mixed distilled water dielectric fluid Syed K.H., Kuppan P. International Journal of Mechanical Engineering and Technology Scopus 9766340  
169 Power flow control for the grid integrated renewable energy system Vinifa R., Kavitha A., Selwynraj A.I. International Journal of Mechanical Engineering and Technology Scopus 9766340  
170 Review on contemporary trends in radiator design and testing of automobile radiators Vinukonda N., Sharma V.K. International Journal of Mechanical Engineering and Technology Scopus 9766340  
171 Behaviour of silver streaks after plating on ABS plastics Sreedharan J., Jeevanantham A.K., Velumani V., Manimaran C. Journal of Engineering and Applied Sciences Scopus 1816949X  
172 Multi-response optimization of process parameters by taguchi grey relational analysis for dissimilar thickness friction stir process corner weld AA5086 alloy Krishnan M., Subramaniam S. Journal of Engineering Science and Technology Scopus 18234690  
173 Thermal stress analysis of similar and dissimilar welded joints Yelamsetti B., Rajyalakshmi G. UPB Scientific Bulletin, Series D: Mechanical Engineering Scopus 14542358  
174 Effect of moisture in gasification of biomass using entrained flow gasifier at constant equivalence ratio Mohanty D.K., Padhiary A. International Journal of Industrial and Systems Engineering Scopus 17485037  
175 A review on non-circular journal bearings Jose J., Behera N. International Journal of Mechanical and Production Engineering Research and Development Scopus 22496890  
176 Drilling of carbon fibre reinforced polymer materials - A review Venkatesh B., Sikarwar R.S. International Journal of Mechanical and Production Engineering Research and Development Scopus 22496890  
177 A review on fabrication and performance evaluation of small wind turbine blades Ajay V., Venkateshwarlu B., Vishnu Vardhan T. International Journal of Mechanical Engineering and Technology Scopus 9766340  
178 Coiled tube heat exchangers - a review Kruthiventi S.S., Govindha Rasu N., Kruthiventi S.S., Hanumantha Rao Y.V. International Journal of Mechanical Engineering and Technology Scopus 9766340  
179 Theoretical investigation on the effect of nanofluids on heat transfer characteristics in a heat pipe Das S., Alag G. International Journal of Mechanical Engineering and Technology Scopus 9766340  
180 Impact of surface adaptation and Acacia nilotica biofiller on static and dynamic properties of sisal fiber composite Vimalanathan P., Venkateshwaran N., Srinivasan S.P., Santhanam V., Rajesh M. International Journal of Polymer Analysis and Characterization Scopus 1023666X  
181 Alterations of cowl lip for the improvement of supersonic-intake performance John B., Senthilkumar P. Journal of Applied Fluid Mechanics Scopus 1735-3572  
182 Web-based decision system for distributed process planning in a networked manufacturing environment Manupati V.K., Kanigalpula P.K.C., Varela M.L.R., Putnik G.D., Araújo A.F., Vieira G.G. Studies in Computational Intelligence Scopus 1860-949X  
183 Vibrational analysis of hybrid fabric-reinforced polymer matrix curved composite beams Jain K., Santosh Kumar B., Venkatachalam G., Vimalanand S., Ayyappan S. Composites: Mechanics, Computations, Applications Scopus 21522057  
184 Double diffusive natural convection in a square enclosure filled with copper-water nanofluid induced by opposite temperature and concentration gradients Saritha N., Senthil Kumar A. Computational Thermal Sciences Scopus 19402503  
185 Recent advancement in cooling technologies of solar Photovoltaic (PV) system Satpute J.B., Rajan A.J. FME Transactions Scopus 14512092  
186 Modelling the metrics of leagile supply chain and leagility evaluation Aravind Raj S., Jayakrishna K., Vimal K.E.K. International Journal of Agile Systems and Management Scopus 17419174  
187 Parametric analysis and optimization of convective fin with variable thermal conductivity using semi-analytical solution Arumugam V.M., Chidambaram R.K. International Journal of Heat and Technology Scopus 3928764  
188 Metallurgical investigations on bimetallic weld joints in austenitic/ferritic stainless steels for paper-pulp industries Porchilamban S., John Rajan A. International Journal of Mechanical and Production Engineering Research and Development Scopus 22496890  
189 Multi-response optimization of process parameters of green electrical discharge machining on aisi 2507 super duplex stainless steel using grey relational analysis (Gra) Viswanthvaleti S., Radhakrishnan R., Rajyalakshmi G. International Journal of Mechanical and Production Engineering Research and Development Scopus 22496890  
190 Production of biodiesel from refined cotton seed oil as well as its effects as fuel in diesel engine Uttamrao K.N., Premkartikkumar S.R. International Journal of Mechanical and Production Engineering Research and Development Scopus 22496890  
191 Vibration analysis of temperature-dependent fg-cnt reinforced composite plates Soni S.A., Mundeja N., Swaroop A.N.S.P., Thomas B. International Journal of Mechanical Engineering and Technology Scopus 9766340  
192 Non-conformity recovery and safe disposal by Poka Yoke and hallmarking in a piston unit Sundaramali G., Abinav Shankar S., Manoj Kummar M. International Journal of Productivity and Quality Management Scopus 17466474  
193 Simulation of hybrid laser-tig welding process using fea Vemanaboina H., Edison G., Akella S., Buddu R.K. Journal of Engineering Science and Technology Scopus 18234690  
194 Evaluation of flexural strength of epoxy resin based hybrid composites reinforced with Jute, Banana and flax natural fibers for bio medical applications Narendiranath Babu T., Singh A.K., Mandliya A., Singh A., Rama Prabha D. Research Journal of Pharmacy and Technology Scopus 9743618  
195 Numerical investigation on optimal arrangement of IC chips mounted on a SMPS board cooled under mixed convection Mathew V.K., Hotta T.K. Thermal Science and Engineering Progress Scopus 24519049  
196 Thermal and energy saving analysis by using tinted double window glass combinations for heat gain in buildings Gorantla K., Shaik S., Babu A., Ranga P., Setty T. International Energy Journal Scopus 1513-718X  
197 Productivity enhancement by component-oriented line balancing method John Rajan A., Ramanamurthy E.V.V., Nath R., Kumar P. International Journal of Industrial and Systems Engineering Scopus 1748-5045  
198 Optimal design of clutch plate based on heat and structural parameters using cfd and fea Porwal A., Tripathi A., Agrawal T., Baskar P. International Journal of Mechanical Engineering and Technology Scopus 0976 – 6340  
199 Modelling and analysis of assembly clearance by size and form tolerances in selective assembly using clustering algorithm Chaitanya S.V., Jeevanantham A.K. International Journal of Productivity and Quality Management Scopus 1746-6474  
200 Hot corrosion studies on alloy 617 OCC in the context of its use in advanced ultra-supercritical (A-USC) power plants Hari P.R., Arivazhagan N., Nageswara Raoa M., Pavan A.H.V. International Journal of Pure and Applied Mathematics Scopus 1311-8080  
201 Fatigue life prediction of doubler plate weld joint using virtual strain gauge, validation through experiments and its application Deshmukh A.R., Venkatachalam G., Saraf M.R. International Review of Mechanical Engineering Scopus 1970-8734  
202 Fabrication and mechanical analysis of jute-sisal hybrid composite Chandran M.S., Sadasivan S., Senthilkumar P., Kumar K.S., Jose A., Shijas A., Kuruvila J. ARPN Journal of Engineering and Applied Sciences Scopus 1819-6608  
203 ANN and RSM approach for modelling and multi objective optimization of abrasive water jet machining process Srinath Reddy N., Tirumala D., Gajjela R., Das R. Decision Science Letters Scopus 1929-5804  
204 Adaptive suspension strategy for a double wishbone suspension through camber and toe optimization Kavitha C., Shankar S.A., Ashok B., Ashok S.D., Ahmed H., Kaisan M.U. Engineering Science and Technology, an International Journal Scopus 2215-0986  
205 Steady-state and transient responses of a flexible eccentric spinning shaft Dasgupta S.S., Rajan J.A. FME Transactions Scopus 1451-2092  
206 An aqua based reduced graphene oxide nanofluids for heat transfer applications: Synthesis, characterization, stability analysis, and thermophysical properties Kamatchi R., Kannan K.G. International Journal of Renewable Energy Research Scopus 1309-0127  
207 A Study on the Influence of Process Parameters on the Viscoelastic Properties of ABS Components Manufactured by FDM Process Dakshinamurthy D., Gupta S. Journal of The Institution of Engineers (India): Series C Scopus 2250-0545  
208 Effect of microwave heat treating processing on frictional behaviour of aluminium alloy 2900 composites Ashwath P., Anthony Xavior M. Tribology - Materials, Surfaces and Interfaces Scopus 1751-584X  
209 Effect of two different rubbers as secondary binders on the friction and wear characteristics of non-asbestos organic (NAO) brake friction materials Raj Jeganmohan S., Gnanaraj Solomon D., Christy T.V. Tribology - Materials, Surfaces and Interfaces Scopus 1751-584X  
210 Comparative studies of simulation, artificial neural network and fuzzy logic for laser shock peening Kumar R.G., Gopalakrishnan A., Malav A., Panjawani H.S., Rajyalakshmi G. UPB Scientific Bulletin, Series D: Mechanical Engineering Scopus 14542358  
211 Determination of stress intensity factor (SIF) of coir and aloe vera fibre reinforced hybrid polymer matrix composites Gopalan V., Pragasam V., Jog O.V., Nikam T.D., Shankar G. UPB Scientific Bulletin, Series D: Mechanical Engineering Scopus 14542358  
212 Calophyllum inophyllum methyl ester biodiesel blend as an alternate fuel for diesel engine applications Ashok B., Nanthagopal K., Sakthi Vignesh D. Alexandria Engineering Journal Scopus 1110-0168  
213 Response optimisation in wire electrical discharge machining of AISI H11 tool steel using Taguchi - GRA approach Vignesh M., Ramanujam R. International Journal of Machining and Machinability of Materials Scopus 17485711  
214 Merits and demerits of automation in manufacturing Verma A., Saluja G. International Journal of Mechanical Engineering and Technology Scopus 9766340  
215 Effect of Incorporation of Multiwalled Carbon Nanotubes on the Microstructure and Flow Behavior of Highly Concentrated Emulsions Bhagavathi Kandy S., Simon G.P., Cheng W., Zank J., Joshi K., Gala D., Bhattacharyya A.R. ACS Omega Scopus 24701343  
216 Thermal analysis simulation for Laser Butt Welding of Inconel625 using FEA Vemanaboina H., Edison G., Akella S., Buddu R.K. International Journal of Engineering and Technology(UAE) Scopus 2227524X  
217 Day lighting and thermal analysis using various double reflective window glasses for green energy buildings Gorantla K.K., Shaik S., Setty A.B.T.P.R. International Journal of Heat and Technology Scopus 3928764  
218 An identification of the best mixture composition for the joule-thomson refrigerator operating at 90 K Kruthiventi S.S., Govindharasu N., Hanumantha Rao Y.V. International Journal of Mechanical and Production Engineering Research and Development Scopus 22496890  
219 Stress and vibration analysis on twostage reduction gearbox using finite elements method Pancholi S., Patel M.N., Nikhil Kumar S.P., Narendiranath Babu T. International Journal of Mechanical Engineering and Technology Scopus 9766340  
220 Technological advancements in energy conservation Anandu N.S., Paul I.J., Rishikesh Mahadevan R. International Journal of Mechanical Engineering and Technology Scopus 9766340  
221 The future of space exploration Madan S., Choubisa M. International Journal of Mechanical Engineering and Technology Scopus 9766340  
222 Collaborative manufacturing based on cloud, and on other I4.0 oriented principles and technologies: A systematic literature review and reflections Varela M.L.R., Putnik G.D., Manupati V.K., Rajyalakshmi G., Trojanowska J., Machado J. Management and Production Engineering Review Scopus 20808208  
223 Cylinder Head Bolt Tightening Strategies in Case of Multi-Cylinder Engines and Its Effect on Gasket Sealing Performance, Bore Deformation and Piston Ring Conformability Marathe A.V., Venkatachalam G., Marathe N.V. Australian Journal of Mechanical Engineering Scopus 14484846  
224 Dataset for evaluating fitness index using Adaptive Neuro-Fuzzy Inference System Kulkarni C., Kulkarni S., Kandasamy J. Data in Brief Scopus 23523409  
225 An Overview of Parameters Influencing the Performance of Hermetic Reciprocating Compressor for Domestic Applications Samuel K.J., Thundil Karuppa Raj R., Edison G. International Journal of Air-Conditioning and Refrigeration Scopus 20101325  
226 Design and flow analysis of a 2MW wind turbine Sarma K.L.N.S., Vamsi S.K., Thottathil Varghese J., Venkateshwarlu B. International Journal of Mechanical Engineering and Technology Scopus 9766340  
227 Effect of milling time on production of aluminium nanoparticle by high energy ball milling Rijesh M., Sreekanth M.S., Deepak A., Dev K., Surendranathan A.O. International Journal of Mechanical Engineering and Technology Scopus 9766340  
228 Key aspects of electric vehicle technologies-An overview Bal D.K., Bhasarkar J.B., Sahoo B.B. International Journal of Mechanical Engineering and Technology Scopus 9766340  
229 Analysis Of Challenges And Opportunities Prevailing In The Indian Food Industry Ram Swaminathan, J N V Raghuram, Shashank, International Journal of Business and Management Invention Scopus 23198028  
230 Computational fluid dynamics analysis of a finned tube dehumidifier for a solar humidification dehumidification desalination plant B Monarch, C Chiranjeevi, V Tejasvi, T Srinivas, R Shankar, Pakistan Journal of Biotechnology Scopus 18121837  
231 COUPLED THERMOMECHANICAL ANALYSIS OF DISC BRAKE ROTOR Yeshwanth Chowdary, Ramesh Babu Vemuluri, Piyush Patil, International Journal of Engineering Research and Application Scopus 22489622  
232 Cryptocurrency Bitcoin Challenges and opportunities Visalakshmi S, Venugopal, Suraj Kushe sekhar, SPIM International Journal of Management Research Scopus 23945842  
233 Exergy analysis of solar photo voltaic thermal hybrid heat pump working with circular and triangular evaporator tube configurations N Gunasekar, R Prakash, M Mohanraj, G Sathish Sharma, Pakistan Journal of Biotechnology Scopus 18121837  
234 Experimental Field Performance Analysis of Small Weed Remover in Sugarcane Grassland Prabu K, SAE International in United States Scopus 1487191  
235 High-temperature corrosion behaviour of HVOF sprayed Cr3C2 25NiCr coated on alloy X22CrMoV12-1 at 600 oC Akshy Prasana, Manikandan M, Sreenivasulu, Duoli, Journal of Thermal Spray and Engineering Scopus    
236 Experimental Investigation on Laminar Separation Bubble Over an Airfoil A Review A Immanuel Selwyn Raj, V Somashekar, Indian Journal of Science and Technology Scopus 9745645  
237 Tribological characteristics of Pongamia oil methyl ester Ashok B. Nantha Gopal K. , Anil Payyappalli Mana Jurnal Tribologi WOS 2289-7282  

Last updated on:11 Jun 2020

2017

Sl No Title of paper Name of the author/s Name of journal Indexed In
Scopus / WOS/Pub Med / ICI / Non Scopus
ISSN number
1 3-D stochastic finite elements for thermal creep analysis of piping structures with spatial material inhomogeneities Y Appalanaidu, Sayan Gupta, Anindya Roy, Acta Mechanica WOS 16196937
2 A Comparative study on the effect of oil Pocket Distribution on Coefficient of Friction at the Liner-Ring interface with Coated Piston Rings George Elias Kurien, P M Anil, Evelyn George, Vishal U, Journal of Chemical and Pharmaceutical Sciences Scopus 23498552
3 A cyber-physical system based collaborative distributed manufacturing system architecture for intelligent manufacturing Abhishek Thakur, V K Manupati, Nishant Chaudhary, Piyush Tilokani, V K Manupati, Eric Costa, Regional Helix Portugal Non-Scopus  
4 A futuristic fuel - Hydrogen Premkartikkumar SR, Gopidesi Radha Krishna, Nitin Uttamrao Kautkar, International Journal of Advance Research in Engineering Science and Technology Non Scopus 23939877
5 A genetic algorithm-based artificial neural network model with TOPSIS approach to optimize the engine performance Sakthivel G, Senthil Kumar S, Ilangkumaran M, Biofuels Scopus 17597277
6 A hybrid multi-objective evolutionary algorithm approach for handling sequence- and machine dependent set up times in unrelated parallel machine scheduling problem V K Manupati, Rajyalakshmi G, FTS Chan, J J Thakkar, Journal of Sadhana WOS 9737677
7 A Methodology for Transformation of Small Scale Enterprises Using Simple Tools Vezhavendhan R, S Narayanan, Journal of Chemical and Pharmaceutical Sciences Scopus 23498552
8 A modified post-processing technique to design a compliant based microgripper with a plunger using topological optimization Bharanidharan, T Ramesh, International Journal of Advanced Manufacturing Technology WOS 14333015
9 A new approach to spindle radial error evaluation using a machine vision system Kavitha, S Denis Ashok, Metrology and measurement systems Scopus 8608229
10 A Review and Comparison of Dugoff and Modified Dugoff Formula with Magic Formula Akshay Bhoraskar, Sakthivel Palanivelu, International Conference on Nascent Technologies in the Engineering Field IEEE conference publications    
11 A Review on Application of Acoustic Emission Analysis in Friction Stir Welding Senthilkumar S, M Boopathi, Srivani A, Giriraj Mannayee, Journal of Chemical and Pharmaceutical Sciences Scopus 23498552
12 A Review on Medicine System Through Ages Venugopal Pulidindi, Sivaji Jinka, Swamy TNVR, International Journal of Mechanical Engineering and Technology Scopus 9766359
13 A Review on Nano Coatings for IC Engine Applications S Vijaya Kumar Reddy, Premkartikkumar SR, Radha Krishna Gopidesi, Nitin Uttamrao Kautkar, International Journal of Mechanical Engineering and Technology Scopus 9776359
14 A review on natural convection heat transfer problems by Lattice Boltzmann Method S Arun, Satheesh A, C G Mohan, P Padmanathan, D Santhosh kumar, Journal of Chemical and Pharmaceutical Sciences Scopus 23498552
15 A Review Paper on Design and CFD Analysis of Fan and Casing for Street Vacuum Cleaning machine Nitesh Patel, Akash Mohanty, Nitesh Panchal, International Journal of Advance Research in Engineering Science and Technology Non Scopus 23939877
16 A simulation study of dust transport on an ancient amphitheatre The Delphi example Sat Ghosh et al, Journal of Cultural Heritage WOS 12962074
17 A Statistical Analysis On The Wear Behaviour of An Epoxy Resin Reinforced With Biaxial Glass Fibers Silicon Carbide And Aluminium Oxide Narendiranath Babu T, R V Mangalaraja, Mayank Agarwal, Ram Prabha D, Journal of Chemical Technology and Metallurgy Scopus 13147471
18 A Study on Ionanoliquids Review Paper Raghuraman DRS, Journal of Chemical and Pharmaceutical Research Non Scopus 9757384
19 A Study On The Online Shopping Habits Among the Consumers With Special Reference To The Vellore City shikhar gupta, Ravikumar B, International Journal of Management Studies Scopus 14676486
20 A Survey On Fault Detection Techniques In Different Machines -
An Image Processing Approach
U Rahamathunnisa, Babu Chellappa Chetty, A Clement King, International Journal of Civil Engineering and Technology Scopus 09766316 
21 Activated sintering of tungsten alloys through conventional and spark plasma sintering process N Senthilnathan, A Raja Annamalai, G Venkatachalam, Materials and Manufacturing Processes Scopus 15322475
22 Active Vibration Control of Laminated Composite Plates by using External Patches N S Sunil Varma, Ramesh Babu Vemuluri, S S Vamsi Krishna, International Journal of Engineering Research and Application Non Scopus 22489622
23 Adopting analytic hierarchy process to prioritise banks based on CRM effectiveness he customers perspective Padmavathy, padmavathy, Sivakumar, International journal of Business Innovation and Research Scopus 17510260
24 Aerothermodynamic considerations for energy deposition based drag reduction technique Desai, V Kulkarni, Gadgil, Bibin John, Applied Thermal Engineering Scopus 13594311
25 Alterations in Critical Radii of Bluntness of Shock Wave Boundary Layer Interaction Bibin John, V Kulkarni, Journal of Aerospace Engineering Scopus 19435525
26 An assessment of calophyllum inophyllum biodiesel fuelled diesel engine characteristics using novel antioxidant additives Ashok B, Nanthagopal K, Jeevanantham AK, Pathikrit Bhowmick, Dhruv Malhotra, Pranjal Agarwal, Energy Conversion and Management WOS 1968904
27 An effective hybrid multi objective evolutionary algorithm for solving real time event in flexible job shop scheduling problem M B S Sreekara Reddy, V K Manupati, Ch Ratnam, Rajyalakshmi G, V K Manupati, Measurements WOS 2632241
28 An innovative method of ocular prosthesis fabrication by bio-CAD and rapid 3-D printing technology A pilot study Alam S, Sgugavaneshwaran M, Arumaikannu G, Mukerjee B, ORBIT WOS 17445108
29 An Integrated Pedal Follower and Torque Based Approach for Electronic Throttle Control in a Motorcycle Engine B Ashok, S Denis Ashok, C Ramesh Kumar, Engineering Journal WOS 20958099
30 An investigation on the effect of sintering mode on various properties of copper-graphene metal matrix composite Ayyappadas C, Raja Annamalai, Muthuchamy, Dinesh K Agarwal, Advanced Powder Technology WOS 9218831
31 Analysing Critical Success Factors for Supporting On-line Shopping M L R Varela, Goran Putnik, Maria do Sameiro Carvalho, Luis Ferreira, V K Manupati, International Journal of Web Portals Scopus 19380208
32 Analysis of hydraulics actuator speed control using digital hydraulics Kalaiarassan G, Giriraj Mannayee, Boopathi M, Somanadh Mayakoti, K Krishnamurthy, International Journal Of Mechanica
l Engineering And Technology
Scopus 9766359
33 Analysis of infinitely short and infinitely long hydrodynamic journal bearings under micro-polar fluid by direct integration method Bikash Routh, Bikash routh, Proceedings of the Gas Turbine Conference India Scopus  
34 Analysis of Metallurgical and Mechanical Properties of Continuous and Pulsed Current Gas Tungsten Arc Welded Alloy C-276 with Duplex Stainless Steel Manikandan M, Arivazhagan N, Arivarasu M, Mageshkumar K, Rajan D N, Transactions of the Indian Institute of Metals WOS 9751645
35 Analysis Of Stress Distribution On Different Sections Under Different Loading And Machining Conditions KLN sandeepa sharma, B Venkateshwarlu, Jacob Thottathil Varghese, International Journal of Mechanical Engineering and Technology Scopus 9776359
36 Analysis of the Double Wishbone Front Suspension System Akshay Bhoraskar, Sakthivel Palanivelu, Ankur Fartyal, International Conference on Nascent Technologies in the Engineering Field IEEE conference publications    
37 Analysis on Project Accelaration and its impact along with profitable solution Venugopal Pulidindi, Harshavardhana Balaji, International Journal of Civil Engineering and Technology Scopus 09766316 
38 Analytical Investigation of Fan Shroud on a Thermal Heat Exchanger for Automotive Applications K Nantha Gopal, B Ashok, Rishabh Bahuguna, Tanmay Prasad, SAE Technical Series Scopus 1487191
39 Applications of MultiMaterial Systems A Review M Velu, Sunil Bhat, Journal of Chemical and Pharmaceutical Sciences Scopus 23498552
40 Assessing environmental impacts of aviation on connected cities using environmental vulnerability studies and fluid dynamics an Indian case study S Ghosh, G Ramchandran, J Nagawkar, K Ramaswamy, A Goenka and A Verma, AI and Society WOS 14355655
41 Assessment of Mechanical and Tribological Properties of Al 2024-SiC-Graphene Hybrid Composites Prashantha Kumar H G, M Anthony Xavior, Procedia Engineering Scopus 18777058
42 Augmented Desalination with Cooling Integration C Chiranjeevi, T Srinivas, International Journal of Refrigeration WOS 1407007
43 Calophyllum inophyllum methyl ester biodiesel blend as an alternate fuel for diesel engine applications B Ashok, K Nanthagopal, D Sakthi Vignesh, Alexandria Engineering Journal Scopus 11100168
44 CFD Analysis of a Compact Heat Exchanger as a Dehumidifier of a Humidification-Dehumidification Desalination Plant C Chiranjeevi, Srinivas T, Shankar R, Proceedings of ICRAME    
45 Characterization of air plasma-sprayed yttria-stabilized zirconia coatings deposited with nitrogen V Bolleddu, P P Bandyopadhyay, V Racherla, International Journal of Advanced Manufacturing Technology WOS 14333015
46 Characterization of Microstructure Tensile Strength and Corrosion Behavior of Autogenous GTA Welds of Inconel X750 With and Without Activated Compound Flux Ramkumar K D, Paul N Chungath T Ali I M Vishnu C, Sujai S, Arivazhagan N, Metallography Microstructure and Analysis WOS 21929270
47 Comparative Analysis on the Effect of Zinc Oxide and Ethanox as Additives with Biodiesel in CI Engine Ashok B, Nanthagopal K, Aravind Mohan, Ajith Johny, Tamilarasu A, Energy WOS 3605442
48 Comparative Evaluation of Performance of TiAlN AlCrN AlCrN-TiAlN coated carbide cutting tools and uncoated carbide cutting tools on turning En24 alloy steel Sampath Kumar T, Balasivanandha Prabu S, Sorna Kumar T, Journal of Advance Manufacturing System Scopus 2196867
49 Comparative Studies on Metallurgical and Mechanical Properties of Bimetallic Combination on Incoloy 800 and SS 316L Fabricated by Gas Metal and Shield Metal Arc Welding Manikandan M, Gunachandran R, Sudhakar S, Srikanth A, Arivarasu M, Transactions of the Indian Institute of Metals WOS 9751645
50 Comparative study on the mechanical and microstructural characterisation of AA 7075 nano and hybrid nanocomposites produced by stir and squeeze casting Kannan C, Ramanujam R, Journal of Advanced Research WOS 20901232
51 Comparison of electrochemical behavior of hydroxyapatite coated onto WE43 Mg alloy by electrophoretic and pulsed laser deposition Magesh Sankar, GEETHA MANIVASAGAM, Satyam Suwas, Subramanian Balasubramanian, Surface and Coatings Technology WOS 2578972
52 Computational fluid dynamics analysis of MQL spray parameters and their impact on superalloy grinding BALAN A S S, Tejas Kullarwar, Laxmanan Vijayaraghavan, Ramaligam Krishnamurthy, Machining Science and Technology WOS 15322483
53 Computational investigation of double diffusive mixed convective flow in an enclosed square cavity with Soret effect C G Mohan, Satheesh A, Frontiers in Heat and Mass Transfer Scopus 21518629
54 Concentrated energy addition for active drag reduction in hypersonic flow regime Ashwin Ganesh, Bibin John, Acta Astronautica WOS 945765
55 Contemporary trends in thermo-hydraulic testing and modeling of automotive radiators deploying nano-coolants and aerodynamically efficient air-side fins Yagnavalkya Mukkamala, Renewable and Sustainable Energy Reviews WOS 13640321
56 Conventional and microwave assisted sintering of Copper-Silicon Carbide metal matrix composites A comparison Ayyappadas, Muthuchamy, Raja Annamalai, Dinesh K Agrawal, Metallurgical Research Technology Scopus 22713654
57 Coordinated Two-Echelon Inventory Model for Optimal Inventory and Shipment Decisions under Exponential Price Dependent Demand Burra Karuna Kumar, Dega Nagaraju, S Narayanan, K Kiran Kumar, Proceedings of the International Conference on Materials Manufacturing and Modelling    
58 CORA - a heuristic approach to machine-part cell formation in the presence of alternative process plans N Sowmiya, N Srinivasa Gupta, B Valarmathi, Ponnambalam S G, International Journal of Advanced Manufacturing Technology WOS 14333015
59 Corporate social responsibility of Bokaro Steel Plant - an empirical study from an Indian context Seema A, Sujatha S, International Journal of Management Development Non Scopus 1752850X
60 Correlating engine NOx emission with biodiesel composition Thangaraja J, Pramod S Mehta, Journal of the Institution of Engineers Series C Scopus 22500553
61 Crack Nucleation in beta Titanium Alloys under High Cycle Fatigue Conditions A Review Benjamin R, M Nageswara Rao, Journal of Physics Conference Series Scopus 17426596
62 CRM effectiveness and customer satisfaction moderating role of relationship duration Padmavathy, International Journal of business excellence Scopus 17560055
63 Cycle time reduction in deck roller assembly production unit with value stream mapping analysis Gangala C, V K Manupati, Modi M, V K Manupati, M L R Varela, Machado J, World Conference on Information Systems and Technologies    
64 Damage Assessment In Structures Using Vibrationdata And Smart Materials D Santhosh Kumar, Mallikarjuna Reddy, bharanidharan, International Journal of Mechanical and Production Engineering Research and Development Scopus 22498001
65 Damage detection and identification in beam structure using modal data and wavelets Shivasharanayya Swamy, Mallikarjuna Reddy, World Journal of Modelling and Simulation Non Scopus 17467233
66 Damage Identification In A Multilevel Structure Using Empirical Mode Decomposition Mallikarjuna Reddy, Praveen Krishna, Journal of engineering science and technology Scopus 18234690
67 Degradation mechanisms and future challenges of titanium and its alloys for dental implant applications in oral environment A Revathi, GEETHA MANIVASAGAM, Alba Dalmau Borras, Anna Igual Munoz, Caroline Richard, Materials Science and Engineering C WOS 2638223
68 Degradation Modeling To Predict the Residual Life Distribution of Parallel Unit Systems on Benchmark Instances Akshay Chandra, V K Manupat, Muneeb Ahsan, Somnath Lahiri, Suraj Panigrahi, V K Manupati, Proceedings of the World Congress on Engineering    
69 Delamination detection in composite wind turbine blade spar model by using spatial signal
processing
Shivasharanayya Swamy, Mallikarjuna Reddy, International Journal of Mechanical Engineering and Technology Scopus 9776359
70 Demonetization Digitalization Day to Day Transactions Impact on business operations Vedantam Seetha Ram, International Journal of Applied Business
And Economic Research
Scopus 9727302
71 Densification of SiC particle reinforced W-Ni-Fe heavy alloy composites through conventional and spark plasma sintering Jitender, Muthuchamy, Paridh, Raja Annamalai, Trans Indian Inst Met WOS 9751645
72 Design and analysis of a bascule bridge using finite element method Krishna A B, Pawgi A P, Gupta S, Narendiranath Babu T, International Journal of Mechanical Engineering and Technology Scopus 9776359
73 Design and analysis of a fuel preheating device for evaluation of ethanol based biofuel blends in a diesel engine application K Nanthagopal, B Ashok, R Thundil Karuppa Raj, Alagiasingam S, Appu S, Murugan A, SAE International Journal of Engines Scopus 19463936
74 Design and Analysis of a Two-Stage Adsorption Air Chiller P Benrajesh, A John Rajan, IOP Conf Series Materials Science and Engineering Scopus 17578981
75 Design and Analysis on Multi Linkage Brake System with Variable Pedal Ratio Deepa A, Mukesh Varma, Manidhar, Pranshu, ICMMM    
76 Design and Development of Compliant Mechanisms Using Parameterization Technique Srikanth SA, BharanidaranR, Materials Today Proceedings Scopus 22147853
77 Design and Development of press tool for Hemming process V Sunil, V Kumarasubramaniam, Rajkumar E, International Journal of Advance Research in Engineering Science and Technology Non Scopus 23939877
78 Design and implementation of 2 2 kw full bridge dc dc converter based battery charger
for locomotives
KAMATCHI R, Indragandhi V, International Journal of Mechanical Engineering and Technology Scopus 9776359
79 Design and optimization of air humidifier for solar desalination using finite difference method Ankita Prasad, Nivedita, C Chiranjeevi, T Srinivas, Proceedings of ICTARGET    
80 Design and thermal analysis of a two wheeler disc plate at different speeds using ANSYS software Ayush Gupta, Mayank Upadhyay, Tapano Kumar Hotta, International Journal of Advance Engineering and Research Development Non Scopus 23484470
81 Design Of A Compliant Mechanism Based Prosthetic Foot Srikanth S A, Bharanidaran R, International Journal of Mechanical and Production Engineering Research and Development Scopus 22498001
82 Design of a substrate board for heat transfer enhancement from an array of discrete heat sources Tapano Kumar Hotta, Rahul Narnindi, Journal of Chemical and Pharmaceutical Sciences Scopus 23498552
83 Design Of Spm With Roll Tool For Mudguard Hemming R Vicknesh, V Kumarasubramaniam, RAJKUMAR E, International Journal of Advance Research in Engineering Science and Technology Non Scopus 23939877
84 Detailed Assessment Study of Variant Temperature EGR on Combustion Performance and Emission Characteristics of a Direct Injection Diesel Engine C Kannan, T Vijayakumar, M Ganesh Karthikeyan, International Conferecen on Energy and Environmental Systems    
85 Determinants of M-Commerce -A Study on Online M-Commerce adopters Rajesh M, Swamy TNVRL, Manoharan M, International Journal of Economic Research Scopus 9729380
86 Development of Environmental Value Stream Model for Assessing Sustainability in Manufacturing K Jayakrishna, M Srikrishna, S Senthilkumar, A Vinoth Louie, R Kamalakannan, Applied Mechanics and Materials Non Scopus 16609336
87 Development of thermophysical properties of aqua ammonia for Kalina cycle system N Shankar Ganesh, T Srinivas, International journal of materials and product technology Scopus 2681900
88 Development of Welding Technique to avoid the Sensitization in the Alloy 600 by Conventional Gas Tungsten Arc Welding Method Srikanth A, Manikandan M, Journal of Manufacturing Processes WOS  15266125
89 Development of welding technology for improving the metallurgical and mechanical properties of 21st century nickel based superalloy 686 Arulmurugan B, Manikandan M, Materials Science and Engineering A WOS 9215093
90 DFMA for Early Cost Estimation of Pedestal Fan - A Case Study Naiju CD, Jayakrishnan V, Pranav VW, Journal of Industrial and Intelligent Information Non Scopus 23013745
91 Document Study on edge slab-column connection in flat slab T S Viswanathan, M Giriraj, International Journal of Civil Engineering and Technology Scopus 09766316 
92 Document Surface micro patterning of aluminium reinforced composite through laser peening Ranjith Kumar g, Rajyalakshmi G, V KManupati, Source of the Document International Journal of Manufacturing Materials and Mechanical Engineering Scopus 21561672
93 Dynamic Analysis Of A Cnt Reinforced Hybrid Composite Beam Made Of Carbon And Glass Fibers Shinde Prasanna, Rajkumar E, American Eurasian Journal of Sustainable Agriculture Non Scopus 19981074
94 Dynamic characteristics of curved nanobeams using nonlocal higher-order curved beam theory M Ganapathi, O polit, O Polit, Physica E Low dimensional Systems and Nanostructures WOS 13869477
95 Dynamic Characterization and parametric instability analysis of rotating magnetorheological fluid composite sandwich plate subjected to periodic in-plane loading Manoharan R, Vasudevan Rajamohan, Journal of sandwich Structures and Materials Scopus 15307972
96 Dynamic characterization of a flexible internally damped spinning shaft with constant eccentricity Dasgupta SS, Vasudevan r, Archive of Applied Mechanics WOS 14320681
97 Dynamic characterization of tapered laminated composite sandwich plates partially treated with magnetorheological elastomer Ramesh Babu V, Vasudevan R, Ananda babu A, Journal of Sandwich Structures and Materials Scopus 15307972
98 Early cost estimation of hand pressure mop using design for manufacture and assembly DFMA Gokul kumar K, NAIJU CD, International Journal of Mechanical Engineering and Technology Scopus 9776359
99 Earthquake Detection and Alerting System using GSM Technology A Plan to Save Some Valuable Lives in this World K V N kavitha, Saket Saraf, N Senthilnathan, International Journal of Electronics Electrical and Computational System Non-Scopus 2348117X
100 Effect of Alumina Addition on the Microstructure and Mechanical Properties of Metal Inert Gas Welded Low Carbon Steel S Sathish, Geetha Manivasagam, Transactions of the Indian Ceramic Society WOS 21655456
101 Effect of compression ratio and hydrogen addition on part throttle performance of a LPG fuelled lean burn spark ignition engine Ravi K, Porpatham E, Pradeep Bhasker J, Fuel WOS 162361
102 Effect of Continuous and Pulsed Current GTA Welding on the Performance of Dissimilar Welds Involving Aerospace Grade Alloys Dev S, Ramkumar K D, Arivazhagan N, Rajendran R, Transactions of the Indian Institute of Metals WOS 9751645
103 Effect of different temperature load on thermal postbuckling behaviour of functionally graded shallow curved shell panels Vishesh Ranjan Kar, Subrata Kumar Panda, T R Mahapatra, Composite Structures WOS 2638223
104 Effect of fillers on the microstructure mechanical properties and hot corrosion behavior of Nb stabilized austenitic stainless steel welds Devendranath Ramkumar K, Anirudh S Singh S Goyal S Gupta SK, Arivazhagan N, Journal of materials research Scopus 8842914
105 Effect of initial roughness and oxidation on the running-in wear of machined surfaces under dry sliding P M Anil, Rajesh Kumar D, Sethuramiah A, International Journal of Surface Science and Engineering WOS 17497868
106 Effect of oxygen enrichment on combustion characteristics of a diesel engine Journal of engineering science and technology Baskar P, Senthilkumar A, Journal of engineering science and technology Scopus 18234690
107 Effect of particle size distribution on CFD simulation of fluidization of Alumina particles Marale S, Niranjana Behera, Jadhav M, Shete A, Niranjana Behera, Journal of Chemical and Pharmaceutical Sciences Scopus 23498552
108 Effect of piston geometry on performance and emission characteristics of an LPG fuelled lean burn SI engine at full throttle condition Ravi K, Porpatham, Applied Thermal Engineering Scopus 13594311
109 Effect of spark timing on the performance of a spark ignition engine running on biogas hydrogen blends E Porpatham, A Ramesh, B Nagalingam, Biofuels WOS 17597277
110 Effect of various Sintering methods on microstructures and mechanical properties of Titanium and its alloy A Review Raja durai, Raja Annamalai, Russian Journal of Non Ferrous Metal WOS 1934970X
111 Effect of velocity and fibres on impact performance of composite laminates Analytical and experimental approach Rahul Singh Sikarwar, R Velmurugan, NK Gupta, International journal of crashworthiness Scopus 17542111
112 Elastic constants of tapered laminated woven jute epoxy and woven aloe epoxy composites under the influence of porosity Vimalanand, Venkatachalam, Journal of reinforced plastics and composites Scopus 7316844
113 Empirical Relationship between BRICS Economies and their Stock Markets Visalakshmi S, International Journal of Finance Scopus 10769307
114 Employee Loyalty Organizational Performance and Performance Evaluation A Critical Survey Sachin Murali, Aayush Poddar, Seema A, IOSR Journal of Business and Management Non Scopus 2278487X
115 Enhancement of exfoliation corrosion resistance of aluminium alloy 5083 by shot peening A Vinoth Jebaraj, L Ajay Kumar, C R Deepak, K V V Aditya, Surface Review and Letters Scopus 0218625X
116 Enhancement of the Machining Parameters on Surface Finish during High Speed Machining of Al 3003 Alloy using Taguchi Design and ANOVA Tilak K B G, Nagaraju D, Proceedings of the International Conference on Manufacturing Technology and Simulation    
117 E-PAYMENTTECHNOLOGY AS AN INTERFACE BETWEEN BANK AND THE ENDUSER Dr M Rajesh, cc, Dr AnuBaisel, r sudhakar, ijpt online journal Non-Scopus 0975766X
118 Epoxy-carbon nanotubes as matrix in glass fiber reinforced laminated composites Ariful Rahaman, M Imran, Fullerenes Nanotubes and Carbon Nanostructures WOS 15364046
119 EVALUATING SUSTAINABLE GROWTH RATE Rajesh M, vasumathi A, Manoharan M, The case centre    
120 Evaluation and Selection of Best Priority Sequencing Rule in Job Shop Scheduling using Hybrid MCDM Technique Kalla Kiran Kumar, Dega Nagaraju, S Gayathri, S Narayanan, IOP Conference Series Materials Science and Engineering Scopus 1757899X
121 Evaluation and selection of material handling equipment in iron and steel industry using analytic hierarchy process Sajja Varun, Raj Harshita, Sesha Pramod, Dega Nagaraju, IOP Conference Series Materials Science and Engineering Scopus 1757899X
122 Evaluation and Selection of Predicaments in Pharmaceutical Supply Chain using AHP under Fuzzy Environment E V S Nikhil, V Sai Ram, V Charan Yadav, Kalla Kiran Kumar, Dega Nagaraju, IOP Conference Series Materials Science and Engineering Scopus 1757899X
123 Evaluation of tensile Propertiesof Epoxy Resin Based Composites Reinforced With Jute Banana Flax And Uni-Axial Glass Fibers Narendiranath Babu T, Anil Mandliya, Akash Kumar Singh, Avneesh Singh, Rama Prabha D, International Journal of Civil Engineering and Technology Scopus 09766316 
124 Evolution Of Supply Chain Management With Emerging
Technologies
Jeetesh Singh, JNVRaghuram, International Journal of Mechanical engineering and Technology Scopus 9776359
125 Experimental Analysis of Surface Morphology of Commercial Fuel Filter with Oxygenated Fuels Anant Parashar, Thangaraja J, SAE Technical Paper Scopus 1487191
126 Experimental and Computational Fluid Dynamics Studies on Dehumidifier in a Combined Cooling and Desalination Plant Suraj Marale, C Chiranjeevi, T Srinivas, Thundil Karuppa Raj R, Journal of Thermal Science and Engineering Applications Scopus 19485085
127 Experimental and simulation studies on a novel gravity based passive tracking system for a linear solar concentrating collector Natarajan M, srinivas t, Renewable Energy WOS 0960-1481
128 Experimental Based Crack Identification In Aircraft Wing
Stiffened Panel Using Wavelet Algorithm
S SURESHA, MALLIKARJUNA REDDY, Arun kumar, International Journal of Mechanical Engineering and Technology Scopus 9776359
129 Experimental Computations to Assess Surface Wear in Roller Bearing Using Integrated Approach of Vibration Analysis and Spectroscopic Techniques Niranjan Hiremath, Mallikarjuna Reddy, International Conference on Innovative Research in Engineering and Science    
130 Experimental Evaluation of Fuzzy Controller for Magnetorheological Damper Semi-Active Suspension System Anand Raj R, Senthil Kumar S, M W Trikande, IEEE International Conference on Signal Processing Informatics Communication and Energy Systems SPICES    
131 Experimental Investigation Of Chip Characterstics In Various
Machining Processes
C singh, B Venkateshwarlu, N Sachdeva, R Tripathi, Ayush Gupta, International Journal of Mechanical Engineering and Technology Scopus 9776359
132 Experimental Investigation of convective heat transfer augmentation using ZnO propylene glycol nano fluids in a automobile radiator Y Appalanaidu, Kumar Sai Tejas, International Journal of Mechanical Engineering and Technology Scopus 9776359
133 Experimental Investigation of heat transfer coefficient and friction factor in a double pipe heat exchanger with and without twisted tape inserts using ZnO propylene glycol nano fluids Y Appalanaidu, T Vijaya sagar, International Journal of Mechanical Engineering and Technology Scopus 9776359
134 Experimental Investigation of Mixed Convection and Surface Radiation Heat Transfer from Protruding Discrete Heat Sources Mounted on a Vertical Channel Tapano Kumar Hotta, Perni Sri Harsha, S P Venkateshan, Heat Transfer Research Scopus 10642285
135 Experimental investigation of radiator performance using TIO2 nanfluid Sai Nikhil Y, Govindha Rasu N, Dinesh G P, Girish Hemanth B B, International Journal of Mechanical Engineering and Technology Scopus 9776359
136 Experimental investigation of work hardening residual stress and microstructure during machining Inconel 718 M Anthony Xavior, M Manohar, Patil Mahesh Madhukar, Jeyapandiarajan P, Journal of Mechanical Science and Technology WOS 19763824
137 Experimental investigation on buckling and free vibration behavior of woven natural fiber fabric composite under axial compression M Rajesh, J Pitchaimani, Composite Structures WOS 2638223
138 Experimental Investigation on Performance and Emission Characteristics of Neodymium oxide Coated Low Heat Rejection Diesel Engine using Bio Diesel G Vidyasagar Reddy, N Govindha Rasu, T Hari Prasad, International Conference on Trends and Advanced Research in Green Energy Technologies    
139 Experimental investigation on performance characteristics of a diesel engine using diesel-water emulsion with oxygen enriched air Baskar P, Senthilkumar A, Alexandria Engineering Journal Scopus 1110-0168
140 Experimental investigation on the suitability of ozonated electrolyte in travelling wire electrochemical machining Kalaimathi, Venkatachalam, Sivakumar, Ayyappan, Journal of the Brazilian society of mechanical sciences and engineering WOS 18063691 
141 Experimental investigations on improving the regeneration and energy management strategy in series hydraulic electric synergy system R Ramakrishnan, Somashekhar S Hiremath, Singaperumal M, International Journal of Green Energy Scopus 15435075
142 Experimental investigations on LPG diesel dual fuel engine Nayan Mirgal, M Mohamed Ibrahim, Shrikant Kumbhar, Babu Chellappachetty, Journal of Chemical and Pharmaceutical Sciences Scopus 2349-8552
143 Experimental investigations on nucleate boiling heat transfer of aqua based reduced graphene oxide nanofluids KAMATCHI R, Heat and Mass Transfer WOS 14321181
144 Experimental Investigations on the Machinability of Inconel 718 Under Different Cutting Conditions Jeyapandiarajan P, M Anthony Xavior, Journal of Chinese society of Mechanical Engineering Scopus 2579731
145 Experimental investigations on the SiO2 flux-assisted GTA welding of super-austenitic stainless steels Ramkumar K D, Varma J L N Chaitanya G, Logesh S Krishnan M, Arivazhagan N, Shanmugam N S, International Journal of Advanced Manufacturing Technology WOS 1433-3015
146 Experimental studies on the effect of metal oxide and antioxidant additives with Calophyllum Inophyllum Methyl ester in compression ignition engine Ashok B, Nanthagopal K, Rayapati Subbarao, Tamilarasu A, Johny A, Mohan A, Journal of Cleaner Production WOS 9596526
147 Experimental Studies to Assess Surface Wear Using Grease Degradation Bearing Temperature and Statistical Parameter of Vibration Signals in a Roller Bearing Niranjan Hiremath, D MALLIKARJUNA REDDY, Material today Journal Scopus 13697021
148 Experimental study on crushing performance of different geometrical structures woven natural silk epoxy composite tubes Devendiran S, Devendiran S, Venkatesan K, Arun Tom Mathew, Abhijeet Thaku, International Journal of Mechanical Engineering Scopus 20504586 
149 Fabrication And Performance Analysis Of Flame Retardant And Natural Fibers Reinforced
Composites
Devendiran, venkatesan, Bharath, Sri Anurag Sai, Sai Mohan, International Journal of Mechanical Engineering and Technology Scopus 9776359
150 Fabrication of BCP Cellulose composite scaffolds for bone regeneration I Manjubala, Priya Ganesan, U Narendra Kumar, B Madhan, Orthopaedic Proceedings Non-Scopus 20494416
151 Factors Influencing Dependency on Smartphone and the Impact on Purchase Behaviour An Empirical Research Swapana, Padmavathy, International Journal of E Business Research Scopus 1548114X
152 Faculty Members Perception Towards Knowledge Sharing R Subashini, International Journal of Applied Business and Economic Research Scopus 9727302
153 FE Analysis of Impact on Kevlar Epoxy Laminates with Different Orientations and Thicknesses Rahul Singh sikarwar, R Velmurugan, N K Gupta, Subham Naik, Materials Today Proceedings Scopus 22147853
154 Finite element vibration analysis of rotating laminated composite beam with varying cross-section using HSDT Ananda Babu A, Arun pandey, Vasudevan R, Edwin Sudhagar P, International Journal on Interactive Design and Manufacturing Scopus 19552505
155 Flow and Fracture Behavior Of Copper With Different Strain Rate At Room Temperature Praveen Kumar, N Govindha Rasu, Bikash Routh, International Journal of Mechanical Engineering and Technology Scopus 9766359
156 FORM AND COLOUR Two Basic Elements of Design Saleem Ahmed, B Gurumoorthy, Research into Design for Communities    
157 Free Vibrations of Damaged and Undamaged Hybrid CFRP GFRP Composite Laminates S Devendiran, K Manivannan, K Venkatesan, Arun Tom Mathew, International Journal of Mechanical Engineering and Technology Scopus 9766359
158 Friction Stir Welding Of Dissimilar Al6061-T6 And Pure Copper M Velu, Ajay Tidole, Paras Mehra, Devdatt Kulkarni, International Journal of Mechanical Engineering and Technology Scopus 9766359
159 Fuzzy Logic Model for Combined Monitoring of Weld Strength and Nugget Hardness of Friction Stir Weld Senthil Kumar S, Senthil kumar S, Boopath M, Kanish T C, Srivani A, Walailak Journal of Science and Technology Scopus 2228835X
160 Heat transfer enhancement of uniformly linearly heated side wall in a square enclosure utilizing alumina water nanofluid Natesan Saritha, A Senthil Kumar, Murugesan Sathiyamoorthy, Chamkha Ali J, Computational Thermal Sciences Non-Scopus 19402554
161 Heat transfer modeling of an office room for optimizing HVAC refrigeration system A numerical approach Ankit Sharma, Ashish Raghupatruni, Abhishek Singh, Mukul Vashishta, Tapano Kumar Hotta, International Conference on Science Engineering and Technology    
162 High temperature wear behavior of Nano Micro B4C reinforced aluminium matrix composites fabricated by an ultrasonic cavitation assisted solidification process Harichandran, Selvakumar, Venkatachalam, Transactions of Indian institute of metals WoS 9751645
163 Hot corrosion resistance of dissimilar AISI 4340 and AISI 304L weldments in the molten salt environment at 600 C Arivarasu M, Venkatesh Kannan M, Devendranath Ramkumar K, Arivazhagan N, Corrosion Engineering Science and Technology WoS 17432782
164 Hot Corrosion Studies on Alloy 617 OCC in the Context of Its Use in Advanced Ultra-Supercritical A USC Power Plants Hari P R, Arivazhagan N, Rao M N, Pavan A H V, Transactions of the Indian Institute of Metals WoS 0975-645
165 Hot-corrosion resistance of dissimilar AISI 4340 and AISI 304L weldments in the molten salt environment at 600 C Arivarasu M, Devendranath Ramkumar K, Arivazhagan N, Venkatesh Kannan M, Corrosion Engineering Science and Technology WoS 17432782
166 Hydrogen permeation studies on the corrosion of stainless steel in acid medium using an eco-friendly inhibitor Sundaramali G, KARTHIKEYAN S, Jeeva P A, Journal of Corrosion Science and Engineering Scopus 14668858
167 Impact behaviour of hybrid composites for structural applications A review Syafiqah Nur Azrie Safri, Mohamed Thariq Hameed Sultan, Mohammad Jawaid, Jayakrishna K, Composites Part B Engineering WoS 18791069
168 Impact of advertisement on buying behavior of customers towards fairness cream Suraj Kushe Shekhar, Tony P Jose, Asian Journal of Management Non-Scopus 23215763
169 Impact of Demonetization on the Indian Economy and its people Aman Mangal, kaustub Kalyankar, B Ravikumar, International Research Journal of Engineering and Technology Non-Scopus 23950072
170 Impact of Disruptive Technology on Indian Banking Sector Visalakshmi S, Ratneswary, International Journal of Mechanical Engineering and Technology Scopus 9766359
171 Impact of Internal Motivational Factors on Performance of Small Medium Enterprises Run by Women Entrepreneurs in Hyderabad-An Empirical Study Jahnavi C, Syed Khalid Perwez, Swamy TNVR, Ramaseshan H, International Journal of Applied Business and Economic Research Non-Scopus 9727302
172 Impact of Social Media - A study on Companys perspective Saravanabhavan, S Siva Kumar, G Velmurugan, R Subashini, Man in India Scopus 251569
173 Impact of surface adaptation and Acacia Nilotica bio filler onstatic and dynamic properties of sisal fiber composite P Vimalanathan, N Venkateshwaran, SP Srinivasan, V Santhanam, M Rajesh, International Journal of Polymer Analysis and Characterization WoS 15635341
174 Impact Of The Antecedents Of The Supply Chain Planning For
An Efficient Retailer Performance
RaghuramJ, Ravilochanan, International Journal of Mechanical engineering and Technology Scopus 9766359
175 Impacts of climate warming on atmospheric phase transition mechanisms CA Varotsos, Satyajit Ghosh, Theoretical and Applied Climatology WoS 14344483
176 Implementation of Digital Technology Strategy for Intellegence Updation and Facilitation through Modern Information Communication Technology Varunkumar M, Venugopal Pulidindi, Journal of Chemical and Pharmaceutical Sciences Scopus 23498552
177 Improvement In Material Properties Of Thermal Energy Storage
Medium With Nanostructured Materials
Dronadula Amarnath Reddy, Raja Sekhar Y, K V SHARMA, Nanoscience Nanotechnology Asia Scopus 22106820 
178 In situ synthesised polymer ceramic composite for orthopaedic applications I Manjubala, Basu Poulami, U Narendra Kumar, Orthopaedic Proceedings Scopus 20494416
179 Influence of aspect ratio on the thermal performance of rectangular shaped micro channel heat sink using CFD code Drs Raghuraman, Rtk Raj, Pk Nagarajan
, Bva Rao,
Alexandria Engineering Journal Scopus 11100168
180 Influence of Coating Thickness and Operating Parameters on the Tribological Characteristics of Inconel 625 Components Fabricated Using DMD P M Anil, C D Naiju, SAE Technical Papers Scopus  
181 Influence of injection timing and exhaust gas recirculation of a Calophyllum inophyllum methyl ester fuelled CI engine B Ashok, K Nanthagopal,
R Thundil Karuppa Raj, J Pradeep Bhasker, D Sakthi Vignesh,
Fuel Processing Technology WoS 18737188
182 Influence of nano-zirconia in alumina refractory ceramics for improved mechanical properties Sudip K Paul, Ariful Rahaman, International Journal of Mechanical Engineering and Technology Scopus 9766359
183 Influence of Operating Parameters on the Reciprocating Sliding Wear of Direct Metal Deposition Components Using Taguchi Method C D Naiju, P M Anil, Procedia Engineering Scopus 18777058
184 Influence of surface roughness and ZDDP additive on the friction and wear of reciprocating sliding surfaces at high contact pressures P M Anil, Vasudevan R, Industrial Lubrication and Tribology WoS 17585775
185 Influence of Tungsten on Dry Sliding Wear Behaviour of Sintered Hot Extruded PM Alloy Steels Fe-C-W-Ti S Senthur Prabu, S Prathiba, Asokan M A, MK Sreelekh, Francis Steff, Mounish Sai, Materials Research Non-Scopus 19805373
186 Influence on the effect of zinc oxide and titanium dioxide nanoparticles as an additive with Calophyllum inophyllum methyl ester in a CI engine B Ashok, K Nanthagopal, A Tamilarasu, Ajith Johny, Aravind Mohan, Energy Conversion and Management WoS 18792227
187 Information systems software quality An overview Murugavel R, Intl Journal of Mech Engineering and Technology Scopus 9766359
188 Innovation and Adoption Sivaji Jinka, Venugopal Pulidindi, P Rajkumar, Ch Ramesh, International Journal of Electrical Power and Power Electronics WoS 1420615
189 Integrated Framework based on Critical Success Factors for E-Commerce M L R Varela, V K Manupati, A F Araujo, G G Vieira, V K Manupati, K Manoj, Journal of Information Systems Engineering Management Non-Scopus 24684376
190 Integrated Three Level Supply Chain Model for Optimality of Inventory and Shipment Decisions under Cubic Price Dependent Demand Dega Nagaraju, S Narayanan, Ramakrishna Rao A, Manupati V K, Proceedings of the International Conference on Materials Manufacturing and Modelling    
191 Interaction between fine MgAl2O4 spinel and alpha alumina powders at high temperatures Soumen Pal, International Journal Of Mechanical
Engineering And Technology
Scopus 9766359
192 Interoperability issues in CAD system with case studies Raj Kumar E, T Narendiranath Babu, Babu chellappachetty, International Journal of Mechanical Engineering and Technology Scopus 9766359
193 Inventory routing problem with simultaneous pickup and delivery of returnable transport items with consideration of renting and Repairing Shubhankar Singh, Yash Gupta, Akash Mishra, Siva Prasad Darla, International Journal of Engineering Research Technology Scopus 09743154 
194 Investigation of machinability characteristics and chip morphology study in laser-assisted machining of Inconel 718 Venkatesan, Ramanujam, kuppan, The International Journal of Advanced Manufacturing Technology WoS 14333015
195 Investigation of reconfiguration effect on makespan with social network analysis for flexible job shop scheduling problem M B S Sreekara Reddy, V K Manupati, Ch Ratnama, Rajeev Agrawal, M L R Varela, Ila Sharma, International Journal of Computers and Industrial Engineering WoS 3608352
196 Investigation of Surface Texture Generated by Friction Drilling on Al2024-T652 M Boopathi, T C Kanish, Shankar S, Mechanics Materials Science and Engineering Scopus 24146935
197 Investigation on Aluminium Alloy 1100 Using Taguchi Robust Design Methodology on CNC Milling K B G Tilaka, Dega Nagaraju, Proceedings of the International Conference on Materials Manufacturing and Modelling    
198 Investigation on semi-active suspension system for multi-axle armoured vehicle using co-simulation Trikande M W, Vasudevan R, Jagirdar V, Sambat Rao, Defence Science Journal WoS 0976464X.
199 Investigations on anisotropy behavior of duplex stainless steel AISI 2205 for optimum weld properties A Vinoth Jebaraj, L Ajay Kumar, C R Deepak, Procedia Engineering Scopus 18777058
200 Investigations on metallurgical and mechanical properties of CO2 laser beam welded Alloy 825 Arivarasu M, Roshith P, Padmanaban R, Thirumalini S, Phani Prabhakar K V, Canadian Metallurgical Quarterly WoS 18791395
201 Investigations on the Finishing Forces in Magnetic Field Assisted Abrasive Finishing of SS316L Kanish T C, Narayanan S, Kuppan P, Denis Ashok S, Procedia Engineering Elsevier publisher Scopus 18777058
202 Investigations on the microstructure tensile strength and high temperature corrosion behaviour of Inconel 625 and Inconel 718 dissimilar joints Ramkumar K D, Arivazhagan, Abraham W S Viyash V, Journal of Manufacturing Processes WOS 15266125
203 Journal bearing fault detection based on Daubechies Wavelet Narendiranath Babu T, Himamshu H S, Prabin Kumar, Rama Prabha D, Nishant Chiluar, Archives of Acoustics WoS 2300262X
204 Large eddy simulation of three-dimensional plane turbulent free jet flow Mukul Bisoi, Manab Kumar Das, Subhransu Roy, Devendra Kumar Patel, European Journal of Mechanics B Fluids WoS  09977546
205 Lemon Essential oil A Partial Substitute for Petroleum Diesel Fuel in Compression Ignition Engine B Ashok, K Nanthagopal, R Thundil Karuppa Raj, Shantanu Jathar, K John samuel, Rahul krishnan, International Journal Of Renewable
Energy Research
WoS 13090127
206 Lemon peel oil A novel renewable alternative energy source for diesel engine B Ashok, R Thundil Karuppa Raj, K Nanthagopal, R Krishnan, Subbarao R, Energy Conversion and Management WoS 18792227
207 Lever ayus has huls sleeping beauty finally awakened-case study Ramaseshan H, Manoharan M, Kalyani Rangarajan, The case centre    
208 Lever Ayush Has Huls Sleeping Beauty Finally Awakened-Teaching Note Ramaseshan H, Manoharan M, Kalyani Rangarajan, The case centre    
209 Machinability of Hybrid Metal Matrix Composite-A Review JP Ajith Kumar, M Anthony Xavior, Procedia Engineering Scopus 18777058
210 Machinability studies on Al 7075BNAl2O3 squeeze cast hybrid nanocomposite under different machining environments Kannan C, Ramanujam R, Balan A S S, Materials and Manufacturing Processes WOS 15322475
211 Manufacturing Services Classification in a Decentralized Supply Chain using Text Mining V K Manupati, MD AKHTAR, M L R Varela, Goran Putnik, A M Madureira, Hybrid Intelligent System Non-Scopus  
212 Mechanical and dynamic mechanical behaviour of novel glass natural fibre intra-ply woven polyester composites M Rajesh, J Pitchaimani, Sadhana WoS 9737677
213 Mechanical and Physical Properties of Natural Additive Dispersed Lime R Rav, S Thirumalini, M Rajesh, Journal of Building Engineering Scopus 23527102
214 Mechanical and Thermal properties of Nanoclay glass fiber epoxy laminated composite Bipin Kumar Sharma, Geet Sharma, Ariful Rahaman, International Journal of Applied Engineering Research Scopus 9739769
215 Mechanical characterization of natural fiber intraply fabric polymer composites Influence of chemical modifications M Rajesh, J Pitchaimani, Journal of Reinforced Plastics and Composites WoS 15307964
216 Mechanical Properties of Natural Fiber Sandwich Composite Effect of Core Layer Kanish T C, Rajesh M, Mechanics Materials Science and Engineering Scopus 24146935
217 Metal hydrides for energy applications Classification PCI characterization and Simulation Vinod Kumar Sharma, E Anil Kumar, International Journal of Energy Research WoS 1099114X
218 Methods of hydrogen charging and effect of hydrogen charging on physical properties of copper Praveen Kumar, Journal of Chemical and Pharmaceutical Sciences Scopus 23498552
219 Microstructure and mechanical properties of spark plasma sintered tungsten heavy alloys N Senthilnathan, A Raja Annamalai, G Venkatachalam, Materials Science and Engineering A WoS 9215093
220 Modelling the Forming Limit Diagram for Aluminium Alloy Sheets using ANN and ANFIS S Kannadasan, A Senthil Kumar, C Pandivelan, C Sathiya Narayanan, Applied Mathematics and Information Sciences Scopus 23250399
221 Nature of job and psychiatric problems- the experiences of industrial workers Syed Khalid Perwez, Ramaseshan H, Mohammad Manzoor, Swamy TNVR, Global Journal of Health Science Non-Scopus 19169744
222 Nonlinear thermoelastic deflection of temperature-dependent FGM curved shallow shell under nonlinear thermal loading T R Mahapatra, Subrata Kumar Panda, Vishesh Ranjan Kar, K Mehar, Journal Of Thermal Stresses WoS 1521074X
223 Numerical investigation of natural and mixed convection heat transfer on optimal distribution of discrete heat sources mounted on a substrate Mathew V Karvinkoppa, Tapano Kumar Hotta, International Conference on Science Engineering and Technology    
224 Numerical investigation of shell and tube heat exchanger using Al2O3 nanofluid Surana A K, R Thundil Karuppa Raj, K John Samuel, Harshit S, Kumar U, International Journal of Thermodynamics Scopus 21461511
225 Numerical simulation and performance measure of highly efficient GaP InP Si multi junction solar cell Sathya p, R Natarajan, International Journal of Energy Research WoS 1099114X
226 Optimality of cycle time and inventory decisions in a two echelon inventory system with exponential price dependent demand under credit period Seelam Krugon, Dega Nagaraju, IOP Conference Series Materials Science and Engineering Scopus 1757899X
227 Optimality of Cycle Time and Inventory Decisions in a Two Echelon Inventory System with Non-linear Price Dependent Demand under Credit Period Seelam Krugon, Dega Nagaraju, Proceedings of the International Conference on Materials Manufacturing and Modelling    
228 Optimisation and formability study of AA5052 through incremental sheet forming Angshuman Baruah, Pandivelan C, Jeevanantham AK, Subhodeep Das, International Journal of Computer Aided Engineering and Technology Scopus 17572665
229 Optimization of AA5052 in incremental sheet forming using grey relational analysis Angshuman Baruah, Pandivelan C, Jeevanantham AK, Measurement WOS 2632241
230 Optimization of parameters influencing the dynamic behavior of a banana fibre reinforced hybrid polymer matrix compsoites Harikrushna, Venkatachalam, ayyappan, Composites Mechanics computations applications Non-Scopus 21522073
231 PEO-CMC blend nanofibers fabrication by electrospinning for soft tissue engineering applications Basu Poulami, I Manjubala, Alexandros Repanas, Anamika Chatterjee, Birgit Glasmacher, U NarendraKumar, Materials Letters WoS 0167577X
232 Perceived Organisational Support on Career success An Employee Perspective An Empirical study from an Indian Context Seema A, Sujatha S, Middle East Journal of Management Scopus 20503644
233 Perceptions and attitudes towards the silent salesman Suraj Kushe Shekhar, Raveendran P T, International Journal of Business Innovation and Research Scopus 17510260
234 Perforated Aluminium Sheet Forming Simulation Using Pamstamp Kovalan SANDIYAPPAN, Venkatachalam GOPALAN, Arun Tom Mathew, Academic Journal of Manufacturing Engineering Non-Scopus 15837904
235 Performance analysis and emissions profile of cottonseed oil biodiesel ethanol blends in a CI engine K Nanthagopal, B Ashok, K Senthil Kumar, R Thundil Karuppa Raj, Denis Ashok S, Varatharajan V, Biofuels WoS 17597277
237 Performance Characteristics Of An Industrial Cross Flow Wind Turbine Rama Prabha D, T Narendiranath Babu, Raj Kumar E, International Journal of Mechanical Engineering and Technology Scopus 9766359
238 Performance combustion and emission characteristics of diesel engine fuelled with waste cooking oil biodiesel diesel blends with additives s senthur prabu, M A Asokan, Rahul Roy, Steff francis, M K Sreelekh, Energy WoS  03605442
239 Performance Evaluation of Electrode Materials in Electric Discharge Deep Hole Drilling of Inconel 718 Superalloy Kuppan P, Narayanan S, R Oyyaravelu, Balan, Procedia Engineering Scopus 18777058
240 Performance evaluation of photovoltaic thermal HDH desalination system B Anand, T Srinivas, Applied solar energy Scopus 19349424 
241 Performance improvement study of cessna-172 aircraft using CFD Manoviraj Singh S, Govindha Rasu N, Arjun Singh, International Journal of Mechanical Engineering and Technology Scopus 9766359
242 Postbuckling analysis of shear deformable FG shallow spherical shell panel under nonuniform thermal environment Vishesh Ranjan Kar, Subrata Kumar Panda, JOURNAL OF THERMAL STRESSES WoS 1521074X
243 Power augmented steam power plant in a cogeneration cement factory Pradeep varma G V, Srinivas T, Journal of Energy Engineering Non-Scopus 19437897
244 Power generation from low temperature heat recovery Pradeep varma, Srinivas T, Renewable and Sustainable Energy Reviews WoS 13640321
245 Prediction of Progressive Ply Failure of Laminated Composite Structures A Review Murugesan N, Vasudevan R, Archives of Computational Methods in Engineering WoS 18861784
246 Processing and Characterization of Al 6061 Graphene Nanocomposites Prashantha Kumar H G, M Anthony Xavior, Materials Today Proceedings Scopus 22147853
247 Processing and Characterization Techniques of Graphene Reinforced Metal Matrix Composites GRMMC A Review M Anthony Xavior, Prahsantha Kumar H G, Materials Today Proceedings Scopus 22147853
248 Production Distribution Planning in a MultiEchelon Supply Chain Using Carbon Policies A Review and Reflections S Jane Jedidah, V K Manupati, V K Manupati, Kushal Kumar Chode, Biswajita Mohanty, Leonilde Varela, World Congress on Engineering London    
249 Recent Developments in Heat Treatment of Beta Titanium Alloys for Aerospace Applications Santhosh R, Nageswara Rao, Geetha M, Transactions of the Indian Institute of Metals WoS 9751645
250 Recent developments in investigation on buckling and post buckling responses of laminated composite shells Paul Praveen A, Vasudevan K, Vasudevan K, Arun Tom Mathew, Polymer Composites WoS 15480569
251 Recent Trends And Behavior Of Youth In The Field Of Online Shopping R Sudhakar, Syed Khalid Perwez,
Shivam Adity, Keyadeep Kaur Sethi,
Man India Publications    
252 Redesigning of Shopping Cart for Cost Reduction Using DFMA Naiju Cd, Warrier PV, Jayakrishnan V, MATEC Web of Conferences Non-Scopus  
253 Reduced graphene oxide water nanofluids for solar collectors Synthesis stability and thermal properties KAMATCHI R, International conference on Trends and Advanced Research in Green Energy Technologies    
254 Reliability aspects of TiO2 nano fluid coolants in Copper micro heat exchangers DRS Raghuraman, P K Nagarajan, BVA Rao, International Journal of ChemTech Research Scopus 24559555
255 Religiosity as A Panacea to Mitigate Domestic Violence in India karunanithi G, Manoharan M, International Conference on Victim Assistance    
256 Retardation of stainless steel 314 dissolution in acidic medium S Karthikeyan, P A Jeeva, K Raja, Journal of Corrosion Science and Engineering Scopus 14668858
257 Review On Performance Improvement Of As Rs By Implementing Various Techniques For Industries Akshay Malpure, Prasanna Shinde, Siddhesh Kanekar, Rajkumar E, Journal of Chemical and Pharmaceutical Sciences Scopus 23498552
258 Review paper on the effect of dispersion of particles and its effect on the properties of composite materials Baljit Singh, Akash Mohanty, International Journal of Mechanical Engineering and Technology Scopus 9766359
259 Segmental contributions to the movement of the center of mass in normal gait D S Mohan Varma, S Sujatha, Applied Mathematical Modelling WoS 0307904X
260 Semi-active vibration control of an 8x8 armored wheeled platform Trikande MW, Vasudevan R, Karve NK, Jagirdar VV, Ananda Raj A, Journal of Vibration and Control WOS 17412986
261 Sensitivity Study of Wavelet Selection in Structural Health Monitoring Arun kumar, Mallikarjuna Reddy, International Journal of Control Theory and Applications Scopus 9745572
262 Sexual Harassment At TVF -teaching note Ramaseshan H, Manoharan M, Himanshu Tandon, Syed khalid Pervez, The case centre    
263 Sintering of Tungsten and Tungsten heavy alloys of W-Ni-Fe and W-Ni-Cu A reiview Senthilnathan, Rajaannamalai, Venkatachalam, Transactions of Indian institute of metals WoS 9751645
264 Social Media Recruiting an Alternative for Traditional Campus Hiring Padmanand V, Samuel Rajkumar V, Venugopal Pulidindi, Man in India Scopus 251569
265 Sources Of Stress Among Women Entrepreneurs-An Empirical Approach KOKILA, SUBASHINI R, VELMURUGAN, International Journal of Industrial Engineering and Management Science Scopus 24461822
266 Specific Wear Rate Of Epoxy Resin Based Composites Reinforced With Natural Fibers And Uni-Axial Glass Fibers For Bio Medical Applications Narendiranath Babu T, Mageshvaran T, Shankar t, Rama Prabha D, International Journal of Civil Engineering and Technology Scopus 9766316
267 Static and dynamic measurement based thermodynamic analysis of solid sorption refrigeration system Vinod Kumar Sharma, International Journal of Energy Research WoS 1099114X
268 Static Dynamic and Harmonic Analysis of Heavy Vehicle Chassis System Dasaradh Palagiri, Ramesh Babu Vemuluri, Chavali Joy Davidson, Internation al Journal of Research in Mechanical Engineering and Technology Non-Scopus 22495762
269 Steady-state dynamics of a flexible internally damped spinning shaft Sovan Sundar Dasgupta, International Journal of Mechanical Engineering and Technology Scopus 9766359
270 Streptomyces kanamyceticus derivative- An excellent corrosion inhibitor E L Harish, S Karthikeyan, Journal of Corrosion Science and Engineering Scopus 14668858
271 Structural Analysis of Electric Vehicle Transmission - Mounts and Casing for Different Materials Shishir Sirohi, B Ashok, Saurabh Yadav, V Ramesh Babu, C Kavitha, K Nantha Gopal, SAE Technical Paper Scopus  
272 Structural Analysis On Wing Box Spliced Joint For An Aircraft Using Finite Element Method T Narendiranath Babu, RajKumar E, Prasanth, International Journal of Civil Engineering and Technology Scopus 9766316
273 Structural optimization of rotating tapered laminated thick composite plates with ply drop-offs Edwin sudhagar P, Vasudevan R, Ananda Babu, Jeyaraj P, International Journal of Mechanics and Materials in Design WOS 15738841
274 Study Of Sensitivity Of Mode Shapes In Damage Identification
Using Continuous Wavelet Transform
Suresha S, Mallikarjuna Reddy, ARPN Journal of Engineering and Applied Sciences Scopus 18196608
275 Study on the effect of exhaust gas based fuel preheating device on ethanol diesel blends operation in a compression ignition engine K Nantha Gopal, B Ashok, Vignesh Varatharajan, Vivek Anand, R Dinesh Kumar, Clean Technologies and Environmental Policy WOS 16189558
276 Surface Micro Patterning of Aluminium Reinforced Composite through Laser Peening G Ranjith Kumar, G Rajyalakshmi, Vijaya Kumar Manupati, International Journal of Manufacturing Materials and Mechanical Engineering WOS 21561672
277 Surface modification of metastable beta Ti-15V-3Al-3Cr-3Sn alloy using dual shot peening S Sudhagara Rajan, Geetha Manivasagam, Nageswara Rao M, Annual Technical Meeting organised by Indian institute of Metals    
278 Surface morphological studies of metallized plastics rapid prototypes Mohanam K, Karthikeyan S, Sankar Kumar
A, Raja K, Sundaramali G, Jeeva,
International Journal of Mechanical Engineering and Technology Scopus 9766359
279 Sustainability Analysis of Prototyping Processes K Jayakrishna, P Sanjay Guar, R Senthilkumar, Nagarajan Aathis, Applied Mechanics and Materials Non-Scopus 16627482
280 Telefacturing based distributed manufacturing environment for optimal manufacturing service by enhancing the interoperability in the hubs V K Manupati, M Krishnan, Maria Leonilde Rocha Varela, Jose Machado, Journal of Engineering WOS  
281 The antecedents of Agriculture growth an Indian perspective M Jahnavi, Venugopal Pulidindi, S Aswini Priya, M Varun Kuma, Journal of Chemical and Pharmaceutical Sciences Scopus 23498552
282 The effect of electrodeposition zinc-cobalt alloy coatings on the mechanical properties of pressure die cast pdc al 7075 G Sundaramali, S Karthikeyan, P A Jeeva, International Journal of Mechanical Engineering and Technology Scopus 9766359
283 The effect of post-weld heat treatment on microstructure and tensile properties of alloy C-276 welded joints fabricated by pulsed current gas tungsten arc welding Arivarasu M, Manikandan M, Vinoth Jebaraj A, Arivazhagan N, Ciencia e Tecnologia dos Materiais Scopus 8708312
284 The influence of alternate fuels on the emission levels reduction and performance improvement of ci engines K Arun K Aravindh, S Karthikeyan, M Someshwar R Subramanian, R Dinakaran, P A Jeeva, International Journal of Mechanical Engineering and Technology Scopus 9766359
285 The inhibitive action of eco-friendly compound on the corrosion of mild steel in brine water S Karthikeyan, P A Jeeva, R Dinakaran, S Narayanan, Journal of Corrosion Science and Engineering Scopus 14668858
286 The residual stress distribution of CO2 laser beam welded AISI 316 austenitic stainless steel and the effect of vibratory stress relief Mohanty S, Arivarasu M, Arivazhagan N, Phani Prabhakar K V, Materials Science and Engineering A WoS 9215093
287 The Role of Employee Engagement in the Relationship between Emotional and Social Competencies and Employee Intent to Quit A Conceptual Perspective Ramaseshan H, Syed Khalid Perwez, Man in India Scopus 251569
288 The study on force surface integrity tool life and chip on laser assisted machining of inconel 718 using NdYAG laser source Venkatesan, Journal of Advanced Research WOS 20901232
289 Thermal and die electric properties of chemically modified municipal solid waste and banana fiber reinforced polymer composites Ronald Aseer J, Sankaranarayanasamy Krishnasamy, Jayabalan Perumalsami, Natarajan R, Priya Dasan Keereyadath, Environmental Progress and Sustainable Energy WOS 19447450
290 Thermal stability of TiAlN-AlCrN and AlCrN-TiAlN coatings synthesized by the cathodic arc vapour deposition process on a tungsten carbide tool Sampath Kumar T, Balasivanandha Prabu S, Madhavan S, Padmanabhan KA, Transaction of Indian Institute of metals WOS 9751645
291 Thermodynamic analysis of novel multi stage multi effect metal hydride based thermodynamic system for simultaneous cooling heat pumping and heat transformation Vinod Kumar Sharma, E Anil Kumar, International Journal of Hydrogen Energy WOS 18793487
292 Thermodynamic evaluations of solar cooling cogeneration cycle using NaSCNNH3mixture shankar R, Srinivas T, Reddy B V, Applied solar energy Scopus 19349424 
293 Tool Wear Assessment During Machining of Inconel 718 M Anthony Xavior, P Jeyapandiarajan, Manohar M, Patil Mahesh Madhukar, Procedia Engineering Scopus 18777058
294 Transient Analysis on a Freewheel Differential For Baja Sae using Finite Element Method TNarendiranath Babu, Ujjwal Belwariar, RajKumar E, International Journal of Control Theory and Applications Scopus 9745572
295 Transient parameter analysis of pneumatic conveying of fine particles for predicting the change of mode of flow Shijo JS, Niranjana Behera, Niranjana Behera, Particuology WOS 16742001
296 Trends and future perspectives of electronic throttle control system in a spark ignition engine Ashok B, Denis Ashok S, Ramesh Kumar, Annual Reviews in Control WOS 13675788
297 Tribocorrosion and electrochemical behaviour of nanocrystalline diamond coated Ti based alloys for orthopaedic application Vasanth Gopal, Geetha Manivasagam, Maneesh Chandran, MS Ramachandra Rao, Stefano Mischler, Shoufan Cao, Tribology International WOS 0301679X
298 Tribological Characteristics of Zinc Diakyldithio Phosphates Blended with Pongamia Biodiesel Anil P M, Ashok B, Nanthgopal K, SAE Transactions Scopus  
299 Unsteady And Steady State Analysis Of Natural Convection Heat Transfer In The Pin-Fin Apparatus Shubham Mandot, GovindhaRasu N, International ISHMT ASTFE Heat and Mass Transfer Conference    
300 Utilitarian Dimensions And Behavioral Inconsistencies Of Young Fanatic Mobile Phone Users A Study On Indian Perspectives Gemini V Joy, Paul S S, Khalid Alhamari, Anbuudayasankar S P, International Journal Of Enterprise Network Management Scopus 17481260
301 Vernacular architecture as an idiom for promoting cultural continuity in South Asia with a special reference to Buddhist monasteries S Ghosh, A Goenka, M Deo, D Mandal, AI and Society Springer Scopus 14355655
302 Vibration analysis of carbon fiber reinforced laminated composite skin with glass honeycomb sandwich beam using HSDT Mageshwaran S, Manoharan R, Ananda Babu A, Periodica Polytechnica Mechanical Engineering Scopus 1587379X
303 Vibration analysis of rotating delaminated non uniform composite plates Ananda Babu A, Vasudevan R, Aerospace Science and Technology WOS 16263219
304 Vibration and buckling analysis of functionally graded carbon nanotube reinforced composite beams Benedict Thomas, Tile Prashant Suresh, International Journal of Civil Engineering and Technology Scopus 9766316
305 Virtual reality and its Applications in Manufacturing Industries AniruddhaTalekar, SaurabhPatil, PrashantThakre, Rajkumar E, Journal of Chemical and Pharmaceutical Sciences Scopus 23498552
306 Wear Loss Behaviour of Reinforced Hybrid Composite Basalt Fiber With Titanium Oxide Barium Sulphate And Silicon Carbide Narendiranath Babu T, Ram Prabha D, Journal of Chemical Technology and Metallurgy Non-Scopus 13147978 
307 WEDM machining on Aerospace Materials for improving Material Properties Tejas Ajay, Rajyalakshmi G, Mayur Patil, Materials Today Proceedings Scopus 22147853
308 Weldability machinability and surfacing of commercial duplex stainless steel AISI2205 for marine applications A recent review A Vinoth Jebaraj, L Ajay Kumar, C R Deepak, K V V Aditya, Journal of Advanced Research WOS 20901232
309 Wound healing materials - A perspective for skin tissue engineering Basu Poulami, I Manjubala, U Narendra Kumar, Current Science Non-Scopus 113891

2016

Sl No Title of paper Name of the author/s Name of journal Indexed InScopus / WOS/Pub Med / ICI / Non Scopus ISSN number
1 A 3-d computational model for optimum design and analysis of vertical take-off in aircraft Jain, U., Mukkamala, Y. AIAA Modeling and Simulation Technologies Conference, 2016 Scopus 978-1-62410-429-9
2 A case study on effect of grouping technique in a multi-stage hybrid flow shop R Pugazhenthi, M Anthony Xavior, R saravanan, International Journal of Computing Science and Mathematics Non- Scopus 9739769
3 A cointegration analysis of price diffusion amid ADRs and dually listed Indian stocks Visalakshmi S, Lakshmi P, Kavitha Shanmugam, Kesava Prasad, International Journal of Business Innovation and Research Scopus 2322083X
4 A Comprehensive Review on Computer Aided Fixture Design Optimization and Verification Raj Kumar E, International Journal of Pharmacy and Technology Scopus 0975766X
5 A geoengineering approach toward tackling tropical cyclones over the Bay of Bengal S Ghosh, A Sharma et al, Atmosheric Science Letters WOS 1530261X
6 A multi-perspective integrated framework of critical success factors for supporting on-line shopping M L R Varela, Ferreira M F, Vieira G G, V K Manupati, Manoj K, Iberian Conference on Information Systems and Technologies Scopus 21660727
7 A new hybrid approach to optimize the end milling process for AL/SiC composites using RSM and GA Vamsi Krishna, M., Anthony Xavior, M. Indian Journal of Science and Technology Scopus 9746846
8 A new inhibitor cum sealant for anodized aluminium surfaces S Karthikeyan, Journal of Corrosion Science and Engineering Scopus 14668858
9 A new method for designing a compliant mechanism based displacement amplifier BHARANIDARAN R, Srikanth SA, IOP Conference Series Materials Science and Engineering Scopus 1757899X
10 A Paper Review on Finite Element Analysis with Fatigue Characteristics of Composite Multi Leaf Nitesh Panchal, Akash Mohanty, International Journal of Advance Research in Engineering Science and Technology Non- Scopus 23939877
11 A Review Of Service Quality And Customer Satisfaction In Banking Services Global Scenario R Subashini, G Velmurugan, Journal of Internet Banking and Commerce   12045357
12 A review on black coatings for solar energy storaging systems P A Jeeva, S Narayanan, S Karthikeyan, International Journal of ChemTech Research Scopus 24559555
13 A review on Chemical Processes for Plastics substrates used in engineering industries Kumar Raja, International Journal of ChemTech Research Scopus 24559556
14 A review on control system architecture of a SI engine management system Ashok B, S DenisAshok, C Ramesh Kumar, Annual Reviews in Control WOS 13675788
15 A Review on Effect of Thermal Factors on Performance of High Power Light Emitting Diode -HPLED A Rammohan, C Ramesh Kumar, Journal of Engineering Science and Technology Review Scopus 17912377
16 A Review on Mechanical and Tribological Properties of Epoxy Resin SiO2 TiO2 BaSO4 Al2O3 CaO MgO K2O Na2O Fe2O3 Reinforced with Basalt Fibres Narendiranath Babu T, International Journal of ChemTech Research Scopus 24559556
17 A study on scaled up proton exchange membrane fuel cell with various flow channels for optimizing power output by effective water management using numerical technique Saco, S. Arun, R. Thundil Karuppa Raj, and P. Karthikeyan. Energy WOS 3605442
18 Absorber tube with internal hinged blades for solar parabolic trough collector Kalidasan B, Srinivas T, Energy Procedia WOS 18766102
19 Absorber Tube with Internal Pin-Fins for Solar Parabolic Trough Collector kalidasan b, srinivas t, MATEC Web of Conferences    
20 Advanced oxidation of catechol in reverse osmosis concentrate generated in leather wastewater by Cu–graphite electrode Maharaja, P., Boopathy, R., Karthikeyan, S., Mahesh, M., Komal, A.S., Gupta, V.K., Sekaran, G. International Journal of Environmental Science and Technology WOS 17352630
21 Ameliorating heat transfer performance of absorber tube for single axis concentrators kalidas b, srinivas t, Energy proceedia WOS 18766102
22 An Assessment on performance combustion and emission behaviour of a diesel engine powered by ceria nanoparticle blended biofue Annamalai M, Dinesh B, Nanthagopal K, SivaramaKrishnan P, Isaac JoshuaRamesh Lalvani, Energy Conversion and Management WOS 1968904
23 An eco-friendly studies on the controlled dissolution of Mild steel in acidic medium S Karthikeyan, P A Jeeva, Der Pharma Chemica Non- Scopus 0975413X
24 An experimental assessment on the performance of different lubrication techniques in grinding of Inconel 751 Balan ASS, Vijayaraghavan L, Krishnamurthy R, P Kuppan, R Oyyaravelu, Journal of Advanced Research WOS 20901232
25 An Experimental Study on Performance and Emissions of a Direct Ignition Diesel Engine with Crude Pongamia Pongamia Methyl Ester and Diethyl Ether Blended with Diesel John Samuel K, Thundil Karuppuraj R, Sreenajsekhar YRivasulu N, Edison Gundabattini, Arun Saco S, International Journal Of Renewable Energy Research WOS 13090127
26 An Integrated Tribological and Vibration Signal Behaviour of TiN and AlCrN based PVD Coatings for Roller Bearings Niranjan Hiremath, D Mallikarjuna Reddy, Indian Journal of Science and Technology Scopus 9746846
27 An integration of virtual experimental Hardwaren Loop simulation techniques for an effective assessment of DTC FOC motor control algorithms for Hybrid Electric Fuel Cell Vehicle application S S Ramadasi, A Senthil Kumar, Thipse Sukrut Shrikant, Marathe Neelkanth V, International Journal of Control Theory and Applications Scopus 9745572
28 An Intelligent feature based process planning for rotational parts Reddy S, V K Manupati, Manidhar D V, Raj H, Ali A, V K Manupati, IEEE    
29 An investigation of the parametric effects of cutting parameters on quality characteristics during the dry turning of inconel 718 alloy venkatesan, vetrivel Murugan, Indian Journal of Science and Technology Scopus 9746846
30 An Investigation on Effect of Heating Mode and Temperature on sintering of Fe-P alloys Muthuchamy, Raja Annamalai, Rajeev Kumar, Anish Upadhyaya, Material Characterisation WOS 10445803
31 Analysis of Coning and Lubrication at Flexspline cup and Cam Interface in Conventional Harmonic Drives Bikash Routh, Rathindranath Maiti, Ray A K, Industrial lubrication and Triboology UK Scopus 368792
32 Analysis of dimensionality effect on shock wave boundary layer interaction in laminar hypersonic flows Bibin John, V Kulkarni, International Journal of Heat and Fluid Flow WOS 0142727X
33 Analysis Of Mechanical Behaviour Of Hybrid Fiber Jute-Gongura Reinforced Hybrid Polymer Matrix Composites P Prabaharan graceraj, Gopalan venkadachalam, C Pandivelan, A Gautham Shankar, Chandan byral, UPB Scientific Bulletin Series D Mechanical Engineering Non- Scopus 14542358
34 Analysis on Multi Linkage Brake System with Variable Pedal Ratio Deepa A, Yashwant Singh D, Mukesh Varma, Pranshu Khakhar, Materials preceedings Scopus 22147853
35 Analyzing the Influence of Parameters of Delay Time Analysis on Down Time using Taguchi Method Babu Chellappa Chetty, M Mohamed Ibrahim, Indian Journal of Science and Technology Scopus 9746846
36 Angular torque methodology for Cylinder Head bolted joint and validation by FE and experimental work Marathe, A.V., Marathe, N.V., Venkatachalam, G. International Journal of Manufacturing, Materials, and Mechanical Engineering Scopus 21561672
37 Animal fat methyl ester as a fuel substitute for DI compression ignition engine B Ashok, R Thundil Karuppa Raj, K Nanthagopal, Tapaswi A, Jindal A, Hari Subbish Kumar S, International Journal of Thermodynamics Scopus 21461511
38 Anodic electrochemical performances of MgCo2O4 synthesized by oxalate decomposition method and electrospinning technique for Li-ion battery application Darbar, D., Reddy, M.V., Sundarrajan, S., Pattabiraman, R., Ramakrishna, S., Chowdari, B.V.R. Materials Research Bulletin WOS 255408
39 Application of firefly algorithm for design optimization of a shell and tube heat exchanger from economic point of view Mohanty, D.K. International Journal of Thermal Sciences WOS 12900729
40 Application of frequency response curvature method for damage detection in beam and plate like structures Arun Kumar, Mallikarjuna Reddy, IOP Conference Series Materials Science and Engineering Scopus 1757899X
41 Application of reverse engineering and impact analysis of motor cycle helmet Amit Waghmare, Raj Kumar E, Indian Journal of Science and Technology Scopus 9746846
42 Application of virtual Reality in Side clamp fixture assembly Raj Kumar E, Indian Journal of Science and Technology Scopus 9746846
43 Assessing environmental impacts of aviation on connected cities using environmental vulnerability studies and fluid dynamics: an Indian case study Ramchandran, G., Nagawkar, J., Ramaswamy, K., Ghosh, S., Goenka, A., Verma, A. AI and Society WOS 14355655
44 Bearing fault prediction using filter based feature selection methods and data mining techniques S Devendiran, N Harsha Teja, D N Praveen, Hoshima Reddy, International Journal of Mechanical and Mechatronics Engineering Scopus 2077124X
45 Building Lateral Thinking Strategies to Impart English Speaking Skills Nageswari R, Ravikumar B, Jayamani, Pertanika Journal of Social Sciences and Humanities   22318534
46 Centralised and decentralised three echelon inventory model for optimal inventory decisions under price dependent demand Dega Nagaraju, A Ramakrishna Rao, S Narayanan, International Journal of Logistics Systems and Management Scopus 17427975
47 CFD Analysis On epoxy Filled With Glass Fiber Aluminium Oxide Silicon Carbide Composite Journal Bearing Narendiranath Babu T, Rama Prabha D, International Journal of Pharmacy and Technology Scopus 0975766X
48 Characterization of air plasma-sprayed yttria-stabilized zirconia coatings deposited with nitrogen Bolleddu, V., Racherla, V., Bandyopadhyay, P.P. International Journal of Advanced Manufacturing Technology WOS 14333015
49 Characterization of tensile strength and impact toughness of autogenous PCGTA weldments of aeronautical steel and austenitic stainless steel Arivarasu M, Ramkumar K D, Arivazhagan N, Kovove Materialy WOS 13384252
50 Comparative analysis of helically grooved and circumferentially grooved labyrinth seal Kishore Kumar, L., Behera, N International Journal of Engineering and Technology Non- Scopus 2227524X
51 Comparative evaluation on the performance of nanostructured TiAlN, AlCrN, TiAlN/AlCrN coated and uncoated carbide cutting tool on turning En24 alloy steel Sampath Kumar, T., Balasivanandha Prabu, S., Sorna Kumar, T. Indian Journal of Engineering and Materials Sciences Scopus 9751017
52 Comparative study of air plasma sprayed and high velocity oxyfuel sprayed nanostructured WC17Co coatings V Bolleddu, PPBandhyopadyay, V Racherla, International Journal of Advanced Manufacturing Technology WOS 14333015
53 Comparative study on corrosion behavior of plasma sprayed Al2O3 ZrO2 Al2O3 ZrO2 and ZrO2 Al2O3 coatings S Sathish, Geetha Manivasagam, Transactions of Nonferrous Metals Society of China WOS 10036326
54 Comparison of recast-layer on die-steel machined with Al powder-mixed distilled water and kerosene dielectric fluid Khalid Hussain Syed, Kuppan P, International Journal of ChemTech Research Scopus 24559555
55 Comparison Of Surface Roughness Effects On Fiber Matrix And Metal Matrix Composite Journal Bearing Narendiranath Babu T, International Journal of Pharmacy and Technology Scopus 0975766X
56 Contolling of servomotors according to pitch and yaw and roll motions of accelerometer Giriraj, M., and Pudi Anvesh In Energy Efficient Technologies for Sustainability (ICEETS)    
57 Cooling System Optimisation of a Multi - Point Fuel Injection Engine Vadivelu Ma, Naiju CD, Kumar CR SAE Technical Papers Scopus 1487191
58 Current advances in enhancement of wear and corrosion resistance of titanium alloys a review REVATHI A, GEETHA MANIVASAGAM, MAGESH S, Vamsi Krishna Balla, Mitun Das, Materials Technology WOS 17535557
59 Deformation behaviour of alpha beta brass at high temperature and at different strain rates Praveen Kumar, B P Kashyap, Journal of Chemical and Pharmaceutical Sciences Scopus 23498552
60 Design analysis of solar-powered unmanned aerial vehicle Sri, K.R.B., Aneesh, P., Bhanu, K., Natarajan, M. Journal of Aerospace Technology and Management Scopus 21759146
61 Design and analysis of gear system for turboshaft aero engine reduction gearbox Ritu Jacob Boby, Raj Kumar E, Indian Journal of Science and Technology Scopus 9746846
62 Design and analysis of latch access panel of aero engine components Thomson Manoj B, Raj Kumar E, Indian Journal of Science and Technology Scopus 9746846
63 Design and fabrication of high strength, high modulus polymer reinforced metal matrix composites for light weight applications Kumaran, D., Rajadurai, A., Padmanabhan, K. Indian Journal of Science and Technology Scopus 9746846
64 Design considerations and overview of an engine exhaust manifold gasket K Nanthagopal, B Ashok, R Thundil Karuppa Raj, Sabloke H, Agarwal A, Journal of Chemical and Pharmaceutical Sciences Scopus 23498552
65 Design Development And Testing Of Novel Remote Controlled Electrically Operated Hydraulic Jack Deepa A, Naveen Krishna Baru, Sagarnath G, ARPN Journal of Engineering and Applied Sciences Scopus 18196608
66 Design for a Low Altitude Unmanned Aerial Vehicle Deepa A, Shashank, Vishnu G, sumit, IEEE AERO CONF   1095323X
67 Design of axle and disc brakes for installation in a trolley Gaurav Sevda, RajKumar E, American Eurasian Journal of Sustainable Agriculture Non- Scopus 19981074
68 Determination of Optimum Tool for Efficient Rock Cutting Samui, P., Kumar, R., Kurup, P. Geotechnical and Geological Engineering WOS 15731529
69 Determination of stress intensity factor of banana fibre reinforced hybrid polymer matrix composite using finite element method Suryawanshi, R.T., Venkatachalam, G., Vimalanand, S.V. Periodica Polytechnica, Mechanical Engineering Scopus 1587379X
70 Development and experimentation on a new power free solar tracking mechanism Affan M, srinivas t, Energy Efficient Technologies for Sustainability   978-3-03785-782-3
71 Development of pulsed current gas tungsten arc welding technique for dissimilar joints of marine grade alloys Devendranath Ramkumar K, Naren S V Karthik Paga V R Tiwari A, Arivazhagan N, Journal of Manufacturing Processes WOS 15266125
72 Drugs antibiotics as potential corrosion inhibitors for metals- a review S Karthikeyan, International Journal of ChemTech Research Scopus 24559555
73 Dynamic analysis of tapered laminated composite magnetorheological elastomer sandwich plates Ramesh Babu V, Vasudevan R, Smart Materials and Structures WOS 9641726
74 Dynamic characterization of tapered laminated composite sandwich plates partially treated with magneto rheological elastomer Ramesh Babu Vemuluri, Vasudevan R, Ananda Babu A, Journal of Sandwich Structures and Materials Scopus 15307972
75 Dynamic characterization of thickness tapered laminated composite plates Ananda Babu Arumugam, Vasudevan R, Edwin Sudhagar P, Journal of Vibration and Control Scopus 10775463
76 Dynamic instability analysis of rotating delaminated tapered composite plates subjected to periodic in-plane loading Ananda Babu A, Vasudevan R, Archive of Applied Mechanics WOS 14320681
77 Effect of ceramic reinforcements on microwave sintered metal matrix composites P Ashwath, M Anthony Xavior, Materials and Manufacturing Processes WOS 15322475
78 Effect of Di-Tertiary Butyl Peroxide on the performance combustion and emission characteristics of ethanol blended cotton seed methyl ester fuelled automotive diesel engine K Senthil Kumar, R Thundil Karuppa Raj, Energy Conversion and Management WOS 1968904
79 Effect of exhaust gas recirculation on advanced diesel combustion and alternate fuels A review Thangaraja J, Kannan C, Applied Energy WOS 3062619
80 Effect of Hygrothermal Loading on Laminate Composites Deepa A, A Deepa, K Padmanabhan, G Raghunadh, Indian Journal of Science and Technology Scopus 9746846
81 Effect of multiple laser shock peening on the mechanical properties of ETP copper Ayush Bhattacharya, V K Manupati, Siddharth Madan, Chirag Dashora, S Prabhakaran, V K Manupati, Internternatioanl Conference on Mechanics Materials Science and Engineering    
82 Effect of Ni3Al Addition and Heating Mode on the electrochemical response on Austenitic and Ferritic Stainless Steels Raja Annamalai, Anish Upadhyaya, Dinesh K Agrawal, Powder metallurgy and metal ceramics WOS 15739066
83 Effect of pongamia oil methyl ester-diesel blend on lubricating oil degradation of di compression ignition engine K Nanthagopal, R Thundil Karuppa Raj, Fuel WOS 162361
84 Effect of post weld heat treatment on the microstructure and tensile properties of activated flux TIG welds of Inconel X750 Ramkumar K D, Ramanand R Ameer A Simon K A, Arivazhagan N, Materials Science and Engineering A WOS 9215093
85 Effect of winglets induced tip vortex structure on the performance of subsonic wings Gautham Narayanan, Bibin John, Aerospace Science and Technology WOS 12709638
86 Effective boundary conditions and turbulence modeling for steam turbine exhaust hood analysis A Senthil Kumar, K Veerabathraswamy, Applied Thermal Engineering WOS 13594311
87 Effects of filler metals on the segregation mechanical properties and hot corrosion behaviour of pulsed current gas tungsten arc welded super austenitic stainless steel Devendranath Ramkumar K, Arivazhagan N, Chandra S Dev S, Chandrasekhar A Srivastava A Preyas H, Journal of Manufacturing Processes WOS 15266125
88 Effects of organizational justice on teachers job satisfaction An empirical research at self financing arts and science colleges in Vellore district Rajkumar, Suganya, Ravikumar B, Man In India Scopus 251569
89 Effects of oxygen enriched combustion on pollution and performance characteristics of a diesel engine baskar P, Senthilkumar A, Engineering Science and Technology an International Journal WOS 22150986
90 E-glass fibers coated with Nickel Phosphorous by electroless deposition technique Ariful Rahaman, K K Kar, Composite Interfaces Scopus 15685543
91 Electro-Pneumatic Shifting System and Gear Control Unit for a Sequential Gearbox Siddharth Dahiya, B Ashok, Adithya Asok Sharma, Kamalkishore Vora, Ritesh Tekriwal, C Kavitha, SAE Technical Series Scopus 1487191
92 Elucidating the effect of Cu nanoparticles in a porous medium vis a vis heat transfer phenomena A Satheesh, S A Raj, Heat Transfer Asian Research Non- Scopus 15231496
93 Enhancing diesel engine combustion using hydrogen enriched fuels A Review Premkartikkumar SR, International Journal of ChemTech Research Scopus 24559555
94 Establishing Temperature Dependency of the Aerodynamic Drag using CFD and Experimental Analysis Ajinkya Krishnakumar, Parth Sharma, Yash Tambi, B Ashok, Indian Journal of Science and Technology Scopus 9746846
95 Evaluating the effect of side grooving parameters on critical SZW Chaitali Nalawade, Sanjeev Saxena, Akash Mohanty, Engineering Fracture Mechanics WOS 137944
96 Evaluating the machinability of Ti-6Al-4V using coated carbide inserts R Vinayagamoorthy, M Anthony Xavior, International Journal of Services and Operations Management Scopus 17442389
97 Exergy analysis of dehumidifier in a combined two stage desalination and cooling plant C Chiranjeevi, T Sriniva, Journal of Chemical and Pharmaceutical Sciences Scopus 23498552
98 Experiment and statistical analysis of end milling parameters for Al/SiC using Response Surface Methodology Vamsi Krishna, M., Anthony Xavior, M. International Journal of Engineering and Technology Scopus 2227524X
99 Experimental investigation and optimization of machining parameters using grey-relational analysis approach and fuzzy based taguchi loss function method venkatesan, vetrivel Murugan, Indian Journal of Science and Technology Scopus 9746846
100 Experimental investigation of machining parameter under MQL milling of SS304 Gatade VT, Patil V T, P Kuppan, Balan, R Oyyaravelu, Materials Science and Engineering WOS 9215093
101 Experimental Investigation on Engine Performance and Emission Characteristics using Pongamia Orange Oil Blends Sreenivasuliu N, Govindarajulu K, John Samuel K, Rajsekhar Y, Edison G, International journal of Renewable Energy research Scopus ‎13090127
102 Experimental investigation on performance characteristics of a diesel engine using diesel-water emulsion with oxygen enriched air Baskar, P., A. Senthil Kumar Alexandria Engineering Journal Scopus 11100168
103 Experimental studies on drying of orange peel in solar tunnel dryer using sensible heat storage material Bukke, S., Basant Kumar Pillai, B., Karthikeyan, A.K. 2016 International Conference on Energy Efficient Technologies for Sustainability, ICEETS 2016    
104 Experimental studies on the combustion characteristics and performance of a DI diesel engine using kapok oil methyl ester diesel blends M A Asokan, R Vijayan, S senthur prabu, N Venketesan, Int J Oil Gas and Coal Technology Scopus 17533317
105 Experimental studies on two phase flow patterns of air-water mixture in a pipe with different orientations V Jagan, Satheesh A, Flow Measurement and Instrumentation WOS 9555986
106 Exploring the Usage of Econometric Techniques in Non Linear Machine Learning and Data Mining Lakshmi P, Visalakshmi S, International Journal of Mathematics in Operational Research Scopus 17575869
107 Fabrication of cellulose based scaffolds for bone regeneration application Priya Ganesan, I Manjubala, Amruta P Barhanpurkar, Mohan R Wani, U Narendra Kumar, International Journal of ChemTech Research Scopus 24559555
108 Fatigue and wear behavior of Al6061 graphene composites synthesized by powder metallurgy Prahsnatha Kumar H G, M Anthony Xavior, Transactions of the Indian Institute of Metals WOS 9751645
109 Finite element analysis of electrically enhanced friction stir welding M BOOPATHI, Giriraj Mannayee, Journal of Chemical and Pharmaceutical Sciences Scopus 23498552
110 Finite Element Analysis on a Composite Flywheel Narendiranath Babu T, Karnam Abhishek, International Journal of Pharmacy and Technology Scopus 0975766X
111 Finite element vibration analysis of rotating laminated composite beam with varying cross-section using HSDT Arumugam, A.B., Rajamohan, V., Pandey, A., Sudhagar, P.E. International Journal on Interactive Design and Manufacturing WOS 19552505
112 Flexural Behaviour of Jute-Reinforced Hybrid polymer matrix composite Graceraj, Venkatachalam, Garg, Vimal, Afsan, Composites Mechanics computations applications Scopus 21522073
113 Flow Analysis Effect On N700 Shinkansen Bullet Train Using Fluent Software Narendiranath Babu T, International Journal of Pharmacy and Technology Scopus 0975766X
114 Formal to Casual- Usage of Laptop Among Students- An Eye Opener S Paul Silvian, Priyanka G, Sayeda Begum, Gemini V Joy, S Senthil Kumar, Journal of Multidisciplinary Research in Healthcare Non- Scopus 23938544
115 Fuzzy Logic based Speed Control of BLDC Motor on Sensorless Technique for Space Applications K Neethu, Giriraj Mannayee, M Boopathi, T C Kanish, Indian Journal of Science and Technology Scopus 9746846
116 Gaseous alternative fuels for SI engines - A technical review Ravi K, Porpatham E, Pradeep Bhasker J, Mathew S, International Journal of Pharmacy and Technology Scopus 0975766X
117 Gravitational search algorithm for economic optimization design of a shell and tube heat exchanger Mohanty, D.K. Applied Thermal Engineering WOS 13594311
118 Green inhibition of corrosion of mild steel in acid medium P A Jeeva, S Karthikeyan, Journal of Corrosion Science and Engineering Scopus 14668858
119 High Temperature Corrosion studies on Pulsed Current Gas Tungsten Arc Welded Alloy C-276 in Molten Salt Environment Manikandan M, Arivarasu M Arivazhagan N, Puneeth T Sivakumar N, Arul Murugan B Sathishkumar M, Sivalingam S, IOP Conference Series Materials Science and Engineering Scopus 1757899X
120 High Temperature Wear Behaviour of Nano/Micro B4C Reinforced Aluminium Matrix Composites Fabricated by an Ultrasonic Cavitation-Assisted Solidification Process Harichandran, R., Selvakumar, N., Venkatachalam, G. Transactions of the Indian Institute of Metals WOS 9751645
121 Hygrothermal Loading on Laminate Composites Deepa A, K Padmanabhan, Raghunadh, ICDAMS    
122 Impact Damage Hardness And Tribology Characterization Of Epoxy Resin Based Composites Reinforced With Basalt Fibers In Combination With Tio2 Baso4 And Sic Narendiranath Babu T, R V Mangalaraja, S Saravanan, Rama Prabha D, Journal of Chemical Technology and Metallurgy Scopus 13147978
123 Impact of initial partial sequence in the makespan, in permutation flow shop scheduling heuristic algorithms - an analysis Baskar, A., Anthony Xavior, M., Dhanasakkaravarthi, B. Indian Journal of Science and Technology Scopus 9746846
124 Impact On Structural And Mechanical Properties Of Composites During Machining And Cutting A Review Deepa A, Padmanabhan K, Kuppan P, ARPN Journal of Engineering and Applied Sciences Scopus 18196608
125 Impacts of climate warming on atmospheric phase transition mechanisms Varotsos, C.A., Ghosh, S. Theoretical and Applied Climatology WOS 14344483
126 Implementation of Fuzzy Logic Control in Semiactive Suspension for a Vehicle Using MATLAB SIMULINK Rasal, S., Jaganmohan, J., Agashe, S., Wani, K.P. SAE Technical Papers Scopus 1487191
127 Implementation of Real Time Low Voltage System for Enhancement of Safety in an Electric vehicle Manoj Rohit Vemparala, Santosh Ram Somasundaram, Saket M Anandkrishnan, B Ashok, C Kavitha, IEEE digital Explorer    
128 Improvement of Machinability using Laser Aided Hybrid Machining for Inconel 718 Alloy Venkatesan K, Ramanujam R, Materials and Manufacturing Processes WOS 15322475
129 Individual Variables On Subjective Career Success An Empirical Study From An Indian Context Seema A, Sujatha S, International Journal of Applied and Business Economic Research Scopus 9727302
130 Influence of aspect ratio on the thermal performance of rectangular shaped micro channel heat sink using CFD code Raghuraman, D.R.S., Thundil Karuppa Raj, R., Nagarajan, P.K., Rao, B.V.A. Alexandria Engineering Journal Scopus 11100168
131 Influence of fuel injection pressures on Calophyllum inophyllum methyl ester fuelled direct injection diesel engine K Nanthagopal, R Thundil Karuppa Raj, B Ashok, Energy Conversion and Management WOS 1968904
132 Influence of halloysite nanotubes (HNTs) on morphology, crystallization, mechanical and thermal behaviour of PP/ABS blends and its composites in presence and absence of dual compatibilizer Kubade, P., Tambe, P. Composite Interfaces Scopus 15685543
133 Influence of laser peening on the tensile strength and impact toughness of dissimilar welds of Inconel 625 and UNS S32205 Ramkumar, K.D., Kumar, P.S.G., Krishna, V.R., Chandrasekhar, A., Dev, S., Abraham, W.S., Prabhakaran, S., Kalainathan, S., Sridhar, R. Materials Science and Engineering A WOS 9215093
134 Influence of vapour absorption cooling on humidification dehumidification HDH desalination C Chiranjeevi, Srinivas T, Alexandria Engineering Journal Scopus 11100168
135 Integration of Process Planning and Scheduling using Mobile-Agent based approach in a Networked Manufacturing Environment V K Manupati, Manuela Cunha, Paulo Avila, Goran Putnik, M K Tiwari, International Journal of Computers and Industrial Engineering WOS 3608352
136 Interlaminar shear stresses in laminated composite plates under thermal and mechanical loading Murugesan N, Vasudevan R, Mechanics of Advanced Materials and Structures WOS 15376532
137 Investigating structure generated turbulence using an unmanned aerial vehicle: A prelude to optimal ventilation strategies in India’s upcoming smart cities Ghosh, S., Kochhar, K., Sharma, A., Kaushal, S., Agrawal, J., Garg, A., Kumar, A., Dugar, Y. Smart and Sustainable Built Environment Scopus 20466099
138 Investigation on Aqua-Ammonia Based Solar Cooling Cogeneration Plant shankar r, srinivas t, Management of Environmental Quality Scopus 14777835
139 Investigation on effects of tooth profile modifications and transmitted torque on tooth engagements of a pair of helical gears Devendiran S, Harsha Teja, Praveen, DN Reddy, International Journal of Applied Engineering Research Scopus 9739769
140 Investigation on fatigue strength of the jute fiber reinforced hybrid polymer matrix composites Graceraj, Venkatachalam, Gautham Shankar, Krishnakumar, UPB Scientific Bulletin Series D Mechanical Engineering Scopus  
141 Investigation on mechanical behaviour and vibration characteristics of thin walled glass carbon hybrid composite beams under fixed free boundarycondition Murugan, R., Ramesh, R., Padmanabhan, K. Mechanics of Advanced Materials and Structures WOS 15376532
142 Investigations of the mechanical properties of bi-layer and tri-layer fiber reinforced composites K Jayakrishna, K Balasubramani, M T H Sultan, S Karthikeyan, IOP Conference Series Materials Science and Engineering Scopus 1757899X
143 Investigations on tensile strength of banana fibre reinforced hybrid polymer matrix composites venkatachalam, Renjith, Renjith, Nilay, Vasan, Rajaannamalai, Engineering Review Scopus 13309587
144 Investigations on the effect of Piston Squish Area on Performance and Emission Characteristics of LPG Fuelled Lean Burn SI Engine Ravi K, Porpatham E, Pradeep Bhasker J, SAE Technical Papers Scopus 1487191
145 Investigations on the machinability of Waspaloy under dry environment Deepu J, Kuppan P, Sbalan AS, R Oyyaravelu, Materials Science and Engineering Scopus 9215093
146 Lift And Drag Analysis on Polyethylene Aerokote Silk Polyester Fabric Coated Aircraft Wing Narendiranath Babu T, International Journal of Pharmacy and Technology Scopus 0975766X
147 Light weight BIW solutions for improving functional properties A review Shinde P, Ravi K, Nehru N, Pawar S, Balakrishnan B, Nair V, SAE Technical Papers Scopus 1487191
148 LPG gaseous phase electronic port injection on performance emission and combustion characteristics of Lean Burn SI Engine J Pradeep Bhasker, E Porpatham, IOP Conference Series Earth and Environmental Science Scopus 17551307
149 Machinability studies on INCONEL 718 Xavior, M.A., Patil, M., Maiti, A., Raj, M., Lohia, N. IOP Conference Series: Materials Science and Engineering Scopus 1757899X
150 Mahalanobis distance-the ultimate measure for sentiment analysis B Valarmathi, N Srinivasa Gupta, Palinisamy V, International Arab Journal of Information Technology WOS 23094524
151 Mechanical and wear properties of copper-lead alloy prepared by powder metallurgy processing technique Muthuchamy Ayyapan, Raja Annamalai, Nardendrakumar, Journal of Chemical Technology and Metallurgy Scopus 13147978
152 Meta-analysis of Financial Performance and Cross listing of Indian and Chinese firms Lakshmi P, Visalakshmi S, International Journal of Business Excellence Scopus 17560055
153 Metallurgical and mechanical properties of laser welded high strength low alloy steel Arivazhagan N, Oyyaravelu R, Kuppan P, Journal of Advanced Research WOS 20901232
154 Microstructure observation and analysis on hybrid composite of basalt fiber with titanium oxide, barium sulphate and silicon carbide Narendiranath Babu, T. International Journal of ChemTech Research Scopus 24559555
155 Modeling and multi-objective optimization of WEDM of commercially monel super alloy considering multiple users preferences Rajyalakshmi G, Source of the Document Journal of Pharmaceutical Sciences and Research Scopus 9751459
156 Modeling the process parameters of RP-FDM using ANOVA and RESPONSE SURFACE METHODOLOGY for PC-ABS materials D Devika, N Srinivasa Gupta, International Conference on Electrical Electronics and Optimization Techniques ICEEOT    
157 Modelling and multi objective optimization of WEDM of commercially Monel super alloy using evolutionary algorithms Bhargav Bal Reddy, Vishnu Vardhan Reddy, Sajja Varun, Rajyalakshmi G, IOP Conf. Series Materials Science and Engineering Scopus 1757899X
158 Molybdenum disulfide nanoflakes through Li-AHA assisted exfoliation in an aqueous medium Bindhu B, Sharu B K, Gopika M S, P K Praseetha, K Veluraja, RSC Advances Scopus 20462069
159 MR damper characterization for implementation of semi-active suspension control Trikande M W, Vasudevan R, Indian Journal of Science and Technology Scopus 9746846
160 Multipass Welding On Inconel Material with Pulsed Current Gas Tungsten Arc Welding Harinadh, V., Edison, G., Akella, S., Reddy, L.S. and Buddu, R.K. Materials Today: Proceedings Scopus 22147853
161 Multi-perspective integrated framework of critical success factors for supporting on-line shopping Varela, M. L. R., M. F. Ferreira, G. G. Vieira, V. K. Manupati, K. Manoj In Information Systems and Technologies (CISTI)   9789899843462
162 Nanofluid heat transfer under mixed convection flow in a tube for solar thermal energy applications Y Raja Sekhar, K V Sharma, Subash Kamal, Environmental Science and Pollution research WOS 16147499
163 Neural network based approach for the generation of road feel in a steer-by-wire system Jayachandran, Ashok, D. Engineering Journal WOS 20958099
164 Numerical analysis of CI engine to control emissions using exhaust gas recirculation and advanced start of injection M Senthil Kumar, C Ramesh Kumar, P Kashyap Chowdary, Prabhakara Rao Ganji, S Srinivasa Rao, Alexandria Engineering Journal Scopus 11100168
165 Numerical characterization of compact pipe specimen for stretch zone width assessment G Mahajan, Akash Mohanty, S Saxena, Fatigue and Fracture of Engineering Materials and Structures WOS 14602695
166 Numerical modelling of thermal phenomenon in friction stir welding of aluminum plates Vignesh R V, Padmanaban R, Arivarasu M, Thirumalini S, Gokulachandran J, Ram M S S S, IOP Conference Series Materials Science and Engineering Scopus 1757899X
167 Numerical Prediction of NOx in the Exhaust of a CI Engine Fuelled with Biodiesel Using In-Cylinder Combustion Pressure Based Variables Anand Krishnan Manoharan, B Ashok, Saravanan Kumarasamy, SAE Technical Series Scopus 1487191
168 Numerical simulation of a scramjet intake with micro-cavity Senthilkumar P, Kamalraj Thiyagaraja, Journal of Chemical and Pharmaceutical Sciences Scopus 23498552
169 Numerical Study on Performance of Scramjet Intake with Boundary Layer Bleed Rajat Gupta, Senthilkumar P, International Science Press    
170 Opinion mining using an intuitive scoring approach N Srinivasa Gupta, B Valarmathi, International Journal of Pharmacy and Technology Scopus 0975766X
171 Optimal cycle time and inventory decisions in coordinated and non-coordinated two-echelon inventory system under inflation and time value of money Dega Nagaraju, A Ramakrishna Rao, S Narayanan, P Pandian, International Journal of Production Research WOS 1366588X
172 Optimality of cycle time and inventory decisions in a coordinated and non-coordinated three-echelon supply chain under exponential price dependent demand Burra Karuna Kumar, Dega Nagaraju, S Narayanan, International Journal of Logistics Systems and Management Scopus 17427975
173 Optimality of Cycle Time and Inventory Decisions in a Two Echelon Inventory System with Price Dependent Demand under Credit Period Seelam Krugon, Dega Nagaraju, Indian Journal of Science and Technology Scopus 9746846
174 Optimisation of machining parameters in laser aided hybrid machining of Inconel 718 Venkatesan K, Ramanujam R, International Journal of Machining and Machinability of Materials Scopus 1748572X
175 Optimization of incidence angle for augmented performance of solar collector: A case study for Vellore Muthuswamy, N., Kochhar, K., Kumar, A. 2016 International Conference on Energy Efficient Technologies for Sustainability, ICEETS 2016    
176 Optimizing and Validating the Engine Performance and Emission Parameters on Engine Dynamometer through 1D Simulation of a Multi-Cylinder CNG Engine Jadhav, V., Kanchan, S., Thipse, S., Kavathekar, K., Dsouza, A., Sonawane, S. SAE Technical Papers Scopus 1487191
177 Options in Kalina cycle systems shankar r, srinivas t, Energy proceedia WOS 18766102
178 Parametric analysis of steam flashing in a power plant using waste heat of cement factory pradeep varma G V, Srinivas T, Energy proceedia WOS 18766102
179 Parametric design optimization of a skate cycle Raj Kumar E, Sheldon Pinto, Journal of Chemical and Pharmaceutical Sciences Non- Scopus 23498552
180 Parametric modeling and optimization of laser scanning parameters during laser assisted machining of Inconel 718 Venkatesan K, Ramanujam R, Optics and Laser Technology WOS 303992
181 Parametric study of a two stage humidification dehumidification desalination plant C Chiranjeevi, T Srinivas, Journal of Chemical and Pharmaceutical Sciences Scopus 23498552
182 Performance evaluation of honeycomb structured PVC packed humidifier in a Humidification-Dehumidification Desalination Plant amrit raj, rohan bajaj, srinivas t, Energy Efficient Technologies for Sustainability   978-3-03785-782-3
183 Performance of nanostructured TiAlN-AlCrN coated carbide cutting tool on turning En24 alloy steel Sampath Kumar T, Balasivanandha Prabu S, Sorna Kumar T, Indian Journal of Engineering and Materials Sciences WOS 9714588
184 Polymer composites for thermal management- a review M A Vadivelu, C Ramesh Kumar, Girish M Joshi, Composite Interfaces Scopus 15685543
185 Post floods consumer preference towards household purchase - A review through attribute preference method Justin Arokiaraj J, RaghuramJ, IOSR Journal of Business and Management   2278487X
186 Post-buckling behaviour of shear deformable functionally graded curved shell panel under edge compression Vishesh Ranjan Kar, Subrata Kumar Panda, International Journal of Mechanical Sciences WOS 207403
187 Predicting surface tension for vegetable oil and biodiesel fuels Thangaraja J, Anand K, Pramod S Mehta, RSC Advances Scopus 20462069
188 Prediction of Progressive Ply Failure of Laminated Composite Structures: A Review Murugesan, N., Rajamohan, V. Archives of Computational Methods in Engineering WOS 18861784
189 Pressure And Velocity Distribution on Remote Controlled Aircraft Wing Using Finite Element Method Narendiranath Babu T, Rama Prabha D, International Journal of Pharmacy and Technology Scopus 0975766X
190 Process parameters effect on the strength of Friction Stir Spot Welded AA6061 Padmanaban R, Vaira Vignesh R, Arivarasu M, Karthick K P, Abirama Sundar A, ARPN Journal of Engineering and Applied Sciences Scopus 18196608
191 Processing methods and property evaluation of Al2O3 and SiC reinforced metal matrix composites based on aluminium 2xxx alloys P Ashwath, M Anthony Xavior, Journal of Materials Research Scopus 20445326
192 Production and Utilization of Biofuel Emulsions in A Diesel Engine R Prakash, S Murugan, Journal of Chemical and Pharmaceutical Research Scopus 23498552
193 Productivity Improvement on Assembly Line Through Reduction of Down Time Using Autonomous Maintenance Narendiranath Babu T, International Journal of Pharmacy and Technology Scopus 0975766X
194 Productivity improvement using time study analysis in a small scale solar appliances industry- A case study Sai Nishanth Reddy A, Srinath Rao P, Rajyalakshmi G, Source of the Document ARPN Journal of Engineering and Applied Sciences Scopus 18196608
195 Protein and Carbohydrate Biopolymers for Biomedical Applications Sudhanshu Verma, U Narendra Kumar, I Manjubala, International Journal of PharmTech Research Scopus 24559563
196 Quantum mechanical and acceleration studies of autocatalytic coating process A S S Balan, S Karthikeyan, P A Jeeva, K Raja, International Journal of ChemTech Research Scopus 24559555
197 Real-time rule-based scheduling system for integrated delivery in a semiconductor manufacturing using evolutionary algorithm-based simulation approach Manupati, V.K., Revanth, A.S., Srikanth, K.S.S.L., Maheedhar, A., Sreekara Reddy, M.B.S. Advances in Intelligent Systems and Computing WOS 21945357
198 Recent Developments in Heat Treatment of Beta Titanium Alloys for Aerospace Applications Santhosh, R., Geetha, M., Nageswara Rao, M. Transactions of the Indian Institute of Metals WOS 9751645
199 Redesign of an in-market food processor for manufacturing cost reduction using DFMA methodology HARLALKA A, NAIJU CD, JANARDHANAN MN, NIELSEN I, Production and Manufacturing Research WOS 21693277
200 Review on Micro Incremental Sheet Forming Jeevanantham AK, Journal of Chemical and Pharmaceutical Sciences Scopus 23498552
201 Review on various experimental methods in Warm Hydroforming of Sheet Metals C Pandivelan, Journal of Chemical and Pharmaceutical Sciences Scopus 23498552
202 Semi-Active Vibration Control of Laminated Composite Sandwich Plate An Experimental Study R Manoharan, R Vasudevan, Edwin Sudhagar P, Archive of Mechanical Engineering Scopus 23001895
203 Sensitizing The Multiple Damage Identification In Beam Structure Using Hoelder Exponent And Wavelets Suresha S, Mallikarjuna Reddy D, IOP Conference Series Materials Science and Engineering Scopus 1757899X
204 Simulation analysis of hydrogen fuelled homogeneous charge compression ignition HCCI engine Chaitanya Jakati, M Mohamed Ibrahim, Aditya Patil, Amol Kulkarni, International Journal of ChemTech Research Scopus 24559555
205 Simulation of Thermal Stress of SS316 using ANSYS Harinath Vemanaboina, Harinadh Vemanaboina, Edison Gundabattini, Suresh Akella, IJSRD National Conference on Recent Trends Innovations in Mechanical Engineering   23210613
206 Sintering of Tungsten and Tungsten Heavy Alloys of W–Ni–Fe and W–Ni–Cu: A Review Senthilnathan, N., Raja Annamalai, A., Venkatachalam, G. Transactions of the Indian Institute of Metals WOS 9751645
207 Social network analysis based evolutionary algorithimic approach to identify the influence of hubs on flexible scheduling problems M B S Sreekar Reddy, V K Manupati, Ratnam CH, Sharma I V, V K Manupati, International Conference on Industrial Engineering and Operations Management    
208 Solar photovoltaic (PV) system sizing: Considerations from name plate specifications Nikhil, P.G., Subhakar, D., Singh, S.J. 2015 International Conference on Control, Communication and Computing India, ICCC 2015    
209 Spark radius modeling of resistance-capacitance pulse discharge in micro-electric discharge machining of Ti-6Al-4V: an experimental study Kuriachen, B., Mathew, J. International Journal of Advanced Manufacturing Technology WOS 14333015
210 Stability improvement of thin isotropic cylindrical shells with partially filled soft elastic core subjected to external pressure A P Dash, R Velmurugan, MSR Prasad, Rahul Singh Sikarwar, Thin walled structure WOS 2638231
211 Statistical approach for optimization of influencing parameters in laser assisted machining LAM of Inconel alloy Venkatesan K, Ramanujam R, Measurement WOS 2632241
212 Structural Analysis of Pick-Up Truck Chassis using Fem Baskar P, Rahul V, Nirmal R U, Noraje Aniket Arunkumar, International Journal of ChemTech Research Scopus 2455-9555
213 Studies on the reduced dissolution of stainless steel in industry environment- A laboratory approach S Karthikeyan, P A Jeeva, K Raja, International Journal of ChemTech Research Scopus 24559555
214 Studies on the structure-property relationships and corrosion behaviour of the activated flux TIG welding of UNS S32750 Ramkumar, K.D., Goutham, P.S., Radhakrishna, V.S., Tiwari, A., Anirudh, S. Journal of Manufacturing Processes WOS 15266125
215 Study of the Injector Drive Circuit for a high pressure GDI Injector Abhishek Kumar, B Ashok, Neelkantha Banerjee, Neelkantha Banerjee, Abhijeet Kumar, IEEE International Conference on Recent Advances and Innovations in Engineering    
216 Supply Chain Coordination Models A Literature Review Burra Karuna Kumar, Dega Nagaraju, S Narayanan, Indian Journal of Science and Technology Scopus 9746846
217 Surface properties of pressure die cast PDC Al 7075 using laser texturing and electrodeposition Zinc-Nickel alloy coatings Sundaramali G, KARTHIKEYAN S, Jeeva P A, International Journal of ChemTech Research Scopus 24559555
218 Surface Roughness Characteristics On Epoxy Filled With Bidirectional Glass Fiber Aluminium Oxide Silicon Carbide Composite Journal Bearing Narendiranath Babu T, International Journal of Pharmacy and Technology Scopus 0975766X
219 Suture materials - Current and emerging trends Dennis, C., Sethu, S., Nayak, S., Mohan, L., Morsi, Y.., Manivasagam, G. Journal of Biomedical Materials Research - Part A WOS 15524965
220 Synthesis and characterization of AA 6061- Graphene - SiC hybrid nanocomposites processed through microwave sintering Jauhari, S., Prashantha Kumar, H.G., Anthony Xavior, M. IOP Conference Series: Materials Science and Engineering Scopus 1757899X
221 Systematic layout planning and balancing of engine production processes for after test and after paint assembly lines R Durga Prasada, K Vishwa Kumar, P A Jeeva, International Journal of Vehicle Structures and Systems Scopus 9753540
222 Testing Of Novel Remote Controlled Electrically Operated Hydraulic Jack Deepa A, Naveen Krishna Baru, Sagarnath G, ICDAMS    
223 The influence of an environmentally friendly inhibitor on the corrosion of mild steel in saline water P A Jeeva, S Karthikeyan, Xianguo Hu, Journal of Corrosion Science and Engineering Scopus 14668858
224 The Mechanix Behind the Circulation of Low Quality Music Offerings in a Digital World Deepak Paul, Xavier M J, Venugopal Pulidindi, Mediterranean Journal of Social Sciences Scopus 20392117
225 The numerical simulation of double-diffusive mixed convection flow in a lid-driven porous cavity with magnetohydrodynamic effect C G Mohan, Satheesh A, Arabian Journal for Science and Engineering WOS 21914281
226 THE RISE OF E-COMMERCE AND ITS SUBSEQUENT IMPACT ON THE INDIAN RETAIL MARKET Sijoy Syriac, JNVRaghuram, RaghuramJ, International Journal of Management WOS 09766510
227 Thermal comfort analysis of a proposed design for a sustainable living space on Mars S Ghosh, A Jadeja et al, Intelligent Buildings International WOS 17566932
228 Thermodynamic analysis of torrefaction process M Senthil kumar, Ashutosh singh, jithu V P, R Anand Murali, Aravind Revuru, International Journal of Renewable energy research Scopus ‎13090127
229 Thermodynamic approach to enhance the dispersion of graphene in epoxy matrix and its effect on mechanical and thermal properties of epoxy nanocomposites Monimoy Saha, Soumen Pal, Pankaj Tambe, Soumen Pal, Composite Interfaces Scopus 15685543
230 Three-echelon supply chain with centralised and decentralised inventory decisions under linear price dependent demand Burra Karuna Kumar, Dega Nagaraju, S Narayanan, International Journal of Logistics Systems and Management Scopus 17427975
231 Topology And Shape Optimization Of Gear Casing Using Finite Element And Taguchi Based Statistical Analyses Jeevanantham AK, Pandivelan C, ARPN Journal of Engineering and Applied Sciences Scopus 18196608
232 Transformer tank optimization using design of experiments Aniket Ranade, Rajkumar E, Indian Journal of Science and Technology Scopus 9746846
233 Two zone modeling of combustion performance and emission characteristics of a cylinder head porous medium engine with experimental validation Kannan Chidambaram, Vijayakumar Thulasi, Multidiscipline Modeling in Materials and Structures Scopus 15736105
234 Ultrasonication and microwave processing of aluminum alloy-Graphene-Al2O3 nanocomposite Prashantha Kumar H G, M Anthony Xavior, P Ashwath, Materials and Manufacturing Processes WOS 15322475
235 Vibration analysis of a partially treated laminated composite magnetorheological fluid sandwich plate Manoharan R, Vasudevan R, Jeevanantham, Journal of Vibration and Control WOS 10775463
236 Vibration based condition monitoring and fault diagnosis technologies for bearing and gear components-A review Devendiran S, Manivannan K, International Journal of Applied Engineering Research Scopus 9739769
237 Wanna shopping online or offline Sudhakar R, Suraj Kushe Shekhar, Rajesh M, International Journal of Applied Business and Economic Research Scopus 9727302
238 Web-based decision system for effective process planning in network manufacturing environment M L R Varela, M LR VAREL, Araujo A F, G D PUTNIK, V K Manupati, Anirudh K V, Iberian Conference on Information Systems and Technologies Scopus 21660727
239 Wing Design for a Low Altitude Unmanned Aerial Vehicle A Nuanced Study of Aerodynamic Drag Deepa A, Rajkumar Vishnu Ganesh, Shashank Condoor, Sumit Sial, IEEE Explore Scopus  

2015

Sl No Title of paper Name of the author/s Name of journal Indexed In Scopus / WOS/Pub Med / ICI / Non Scopus ISSN number
1 A Case Study on Improvement of a Cellulose Fibre Reinforced Mill Board Industry through a Quality Initiative and Simple Enterprise Transformation Methodology Vezhavendhan R, S Narayanan, International Journal of ChemTech Research Scopus 24559555
2 A Comparative Study Of Port Injected And Carbureted Type Lpg-Diesel Dual Fuel Engine Using CFD Analysis K Peda Chowdaiah, K Somasundaram, U B Gokulraj, B Ashok, S Denis Ashok, Journal of Chemical and Pharmaceutical Sciences Scopus 23498552
3 A Comparative Study on the Tribological Performance of Lubricating Oils with Nanoparticles as Additives Archit Bimal Shah, P M Anil, Karan Kothari, International Journal of Applied Engineering Research Scopus 9739769
4 A Critical Review on Role of prison Environment on Stress and Psychiatric Symptoms among Prisoners Mohammad Mansoor, Syed Khalid Perwez, Ramaseshan h, Mediterranean Journal of Social Sciences Scopus 20392117
5 A green approach on the corrosion studiesof al-siccomposites in sea water S Karthikeyan, M Anthony Xavior, P A Jeeva, K Raja, International Journal of ChemTech Research Scopus 24559555
6 A model of solids friction factor for fluidized dense phase pneumatic conveying Niranjana Behera, V K Agarwal, Mark Jones, K C Williams, Powder technology WoS 325910
7 A Parametric Optimization on Cutting Force during Laser Assisted Machining of Inconel 718 alloy Vignesh M, Venkatesan K, Ramanujam R, Kuppan P, Applied Mechanics and Materials Scopus 16627482
8 A review on the methods for solving the generalized group technology problem N Srinivasa Gupta, B Valarmathi, N Sowmiya, International Journal of Applied Engineering Research Scopus 9739769
9 A stochastic approach towards cycle time reduction for aircraft manufacturing assembly Vasantharaju C, Ashok B, Naiju CD International Journal of Product Lifecycle Management Scopus 17435129
10 A study of waste heat recovery from diesel engine exhaust using phase change material S Senthur prabu, M A Asokan, International Journal of ChemTech Research Scopus 24559555
11 A Study on the Customer Satisfaction and Loyalty at a Private Sector Bank Vellore G Velmurugan, Selvam, Subashini R, International Journal of Applied Engineering Research Scopus 9739769
12 AMMA Free Laptop Scheme For The Student Community Its Reach and Its Impact On Rural Development Varunkumar M, Venugopal P, International Journal of Applied Engineering Research Scopus 9739769
13 An Analysis of Appointment of Directors under the Companies Act G Velmurugan, R Subashini, International Journal of scientific research and management Non- Scopus 23213418
14 An analysis on the influence of oil pocket shape and distribution on the reduction of friction in hydrodynamic lubrication Dileep P Menon, P M Anil, Prakash S Kulkarni, Annual CFD Symposium    
15 An early bearing fault diagnosis using effective feature selection methods and data mining techniques Devendiran S, Manivannan K, International Journal of Engineering and Technology Non- Scopus  2227524X
16 An empirical study on the issues and challenges faced by HR professionals in an IT company in Karnataka India P Saravanan, Vasumathi, R Subashini, International Journal of Services and Operations Management Scopus 17442389
17 An Exploratory Study On The Effective Utilization Of Tacit Knowledge For Organizational Competencies R Subashini, LourthuRaj, International Journal of Management Non- Scopus 9766510
18 An Improved Artificial Neural Network Approach for Product Life Cycle Cost Estimation Siva Prasad Darla, S Narayanan, International Journal of Applied Engineering Research Scopus 9739769
19 An improved feed forward PWM control for MPPT of solar PV systems under varying atmospheric conditions Sathya P, R Natarajan, International Journal of Renewable Energy Research Scopus 13090127
20 An Intelligent Gear Fault Diagnosis Based On Wavelet Packet Transform Information Gain And Multiclass Least Squares Support Vector Machines Rajeswari C, Sathiyabhama, Devendiran, Manivannan K, International Journal of Applied Engineering Research Scopus 9739769
21 An intelligent gear fault diagnosis model based on EMD and evolutionary algorithms Devendiran S, Manivannan K, International Journal of Mechanical and Mechatronics Engineering Scopus 2077124X
22 An investigation on secondary force contacts of tooth pairs in conventional harmonic drives with involute toothed gear set Bikash Routh, Rathindranath Maiti, Ray A K, Sobczyk A, Proc IMechE Part C J Mechanical Engineering Science UK WoS 20412983
23 Analysing the Effect of Grouping Subsystems for Periodic Maintenance Inspection of Equipment using Delay Time Methodology to Minimize the Downtime per Unit Time Babu Chellappachetty, Raju R, Indian Journal of Science and Technology Scopus 9745645
24 Analysis and Machinability of Self Reinforced Composites Deepa A, Padmanabhan K, Kuppan P, NASAS XIX    
25 Analysis of flow behaviour in a two sided lid driven cavity using lattice boltzmann technique S Arun, Satheesh A, Alexandria Engineering Journal Scopus 11100168
26 Analysis of job insertion technique for different initial sequences in permutation flow shop scheduling problems A baskar, M Anthony Xavior, International Journal of Enterprise Network Management Scopus 17481260
27 Analysis of Low temperature Flashing Stage Desalination System Ramesh Kumar VK, Edison Gundabattini, Rajkumar P, Rajendran PR, International journal of Applied Engineering research Scopus 9739769
28 Analysis of mechanical properties of AMMC during WEDM process Rajyalakshmi G, Lalith Chaithanya, Mahesh Senapathi, Sasikanth T, Journal Applied sciences and Research Non- Scopus 23480416
29 Analysis of Surface Topography on Duplex Stainless Steel AISI 2205 for Deep Sea Applications A Vinoth Jebaraj, L Ajay Kumar, C R Deepak, International Journal of Surface Engineering and Interdisciplinary material science Scopus  21667233
30 Analytical and experimental investigation on elastic modulus of reinforced additive manufactured structure Sugavaneswaran M, Arumaikkannu G, Materials and Design WOS 18734197
31 Application of Taguchi Fuzzy-Grey Relational Analysis for Process Parameters Optimization of WEDM on Inconel-825 Rajyalakshmi G, PVRamaiah, Indian Journal of Science and Technology Scopus 9745645
32 Application of the Power Spectral Density for Damage Identification and Location in Beam Structures Shivasharanayya Swamy S, Mallikarjuna Reddy, International Journal of Engineering Research and Technology Scopus 09743154 
33 Awareness of Savings and Investment Options in Z Category Cities of India A Study with reference to Vellore City SEETHA RAM VEDANTAM, SRIRAM G, Indian Journal of Finance Scopus 9738711
34 Bearing fault diagnosis using CWT BGA and artificial bee colony algorithm Devendiran S, Manivannan K, International Journal of Mechanical and Mechatronics Engineering Scopus 2077124X
35 Bearing fault diagnosis using multiclass support vector machine with efficient feature selection methods Devendiran S, Manivannan K, International Journal of Mechanical and Mechatronics Engineering Scopus 2077124X
36 CFD Modeling of Advanced Swirl Technique at Inlet-Runner for Diesel Engine Bhagyada Dhingra, B Ashok, Sparsh Sharma, Kamalkishore Vora, SAE Technical Series Scopus  
37 Characterization of metallurgical and mechanical properties on the multi-pass welding of Inconel 625 and AISI 316L Gokulkumar K, Devendranath Ramkumar K, Arivazhagan N, Journal of Mechanical Science and Technology WoS 19763824
38 Comparative studies on the weldability microstructure and tensile properties of autogeneous TIG welded AISI 430 ferritic stainless steel with and without flux Ramkumar K D, Chandrasekhar A Singh A K, Ahuja S Agarwal A, Arivazhagan N, Rabel A M, Journal of Manufacturing Processes WOS 15266125
39 Comparative study of augmentation in low temperature Kalina cycle systems deepak k, gupta avssks, srinivas t, International Journal of Application of Engineering and Technology Non- Scopus 23953594
40 Comparison of Fuzzy AHP And Topsis Evaluations of Luggage Bag Design Alternatives Shivang Gupta, Shaurabh Kumar Singh, Kunal Agrawal, Dega Nagaraju, ARPN Journal of Engineering and Applied Sciences Scopus 18196608
41 Computational quantum mechanical studies on the dissolution of stainless steel 304 in descaling medium S Karthikeyan, P A Jeeva, International Journal of ChemTech Research Scopus 24559555
42 Computer aided fixture design in virtual environment Raj Kumar E, Annamalai K, International Journal of Applied Engineering Research Scopus 9739769
43 Corporate Diversification and Financial Policy Consequences A Literature Survey G SRIRAM, SEETHA RAM VEDANTAM, N SUNDARAM, American International Journal of Research in Humanities Arts and Social Sciences Non- Scopus 23283696
44 Corrosion inhibition and quantum mechanical studies of L80 carbon steel in Khuff gas environment- a laboratory scale study S Karthikeyan, P A Jeeva, M Paramasivam, K Raja, International Journal of Chemical Sciences Scopus 0972768X
45 Corrosion inhibition of reinforcing steel in simulated concrete pore solution- An ecofriendly approach E L Harish, S Karthikeyan, S K Sekar, International Journal of ChemTech Research Scopus 24559555
46 Corrosion studies of copper powder coated mild steel parts in salt water S Karthikeyan, P A Jeeva, k Raja, A S S Balan, Journal of Corrosion Science and Engineering Scopus 14668858
47 Cost tolerance prediction models for electrochemical machining of metal matrix composites Ayyappan, Kalaimathi, Venkatachalam, Engineering Review Scopus 13309587
48 Dealers Perception Towards Air Conditioner Brands Venugopal P, Indian Journal of Commerce and management Non- Scopus 22295674
49 Design and development of variable valve actuation VVA mechanism concept for multi cylinder engine Jain A, Porpatham E, Ramdasi SS, Thipse SS, Marathe NV, SAE Technical Papers    
50 Design and Development of V-grooved natural convection solar air heater for Odisha D V N Lakshmi, S S Mohapatra, A Satheesh, H Das, Applied Mechanics and Materials Scopus 16627482
51 DESIGN OPTIMIZATION OF SUSPENSION GEOMETRY AND FRAME OF A FORMULA SAE CAR Prasoon Gupta, Alok Joshi, B Ashok, International Conference on Computer Aided Engineering    
52 Development of DTC for induction motor fed with multilevel inverter improved PWM control strategy to maximise energy efficiency in EVHEVFCV S S Ramdasi, A Senthil Kumar, S S Thipse, N V marathe, International Review of Electrical Engineering Non- Scopus 18276660
53 Diagnostics of gear faults using ensemble empirical mode decomposition hybrid binary bat algorithm and machine learning algorithms Rajeswari C, Sathiyabhama, Devendiran S, Manivannan K, Journal of Vibroengineering Scopus 25388460
54 Dicloxacillin An effective retarder for steel dissolution in acid medium S Karthikeyan, P A Jeeva, K Raja, International Journal of ChemTech Research Scopus 24559555
55 Document Optimization of WEDM process for machining aluminium metal matrix composites Karthik C, Rajyalakshmi G, Duraisamy R, International Journal of Applied Engineering Research Scopus 9739769
56 Dry sliding wear characteristics of Biaxial Glass Fiber with Epoxy Al2O3 Sic hybrid Composites Narendiranath Babu T, Rama Prabha D, International Journal of ChemTech Research Scopus 24559555
57 Dynamic Analysis of Beam with A Breathing Crack Suresha S, MALLIKARJUNA REDDY, International Journal of Engineering Research and Technology Scopus 09743154 
58 Effect of alumina nanoparticles on the enhancement of impact and flexural properties of the short glass carbon fiber reinforced epoxy based composites Akash Mohanty, Vijay Kumar Srivastava, Fibers and Polymers WoS 18750052
59 Effect of autogeneous GTA welding with and without flux addition on the microstructure and mechanical properties of AISI 904L joints Ramkumar K D, Arivazhagan N, Narayanan S, Varma J N Chaitanya G Choudhary A, Materials Science and Engineering A WoS 9215093
60 Effect of Carbon Nanotube on thermo-mechanical properties of glass fiber epoxy laminated composites Shubham Gupta, Ariful Rahaman, International Journal of Scientific Research and Publications Non- Scopus 22503153
61 Effect of continuous and pulsed current on the metallurgical and mechanical properties of gas tungsten arc welded AISI 4340 aeronautical and AISI 304 L austenitic stainless steel dissimilar joints Arivarasu M, Arivazhagan N, Ramkumar Kasinath D, Materials Research WoS 19805373
62 Effect of cooling system on the performance of dehumidifier in a desalination plant C Chiranjeevi, T Srinivas, Ashutosh Singh, Proceedings of RESE    
63 Effect of Critical Plasma Spray Parameter on Characteristics of Nanostructured Yttria Stabilised Zirconia Coatings B Venkateshwarlu, Mohan Jagadeesh Kumar M, International Journal of ChemTech Research Scopus 24559555
64 Effect of duplex aging on microstructure and mechanical behavior of beta titanium alloy Ti-15V-3Cr-3Al-3Sn under unidirectional and cyclic loading conditions Santhosh R, Nageswara Rao, Geetha M, Saxena V K, International Journal of Fatigue WoS 18793452
65 Effect of EDM parameters on hole quality characteristics in deep hole drilling of Inconel 718 Superalloy P Kuppan, Narayanan S, Rajadurai A, Adithan, M, International Journal of Manufacturing Research Scopus 17500605
66 Effect of Filler Metals on the Structure Property Relationships of Continuous and Pulsed Current GTA Welds of AISI 430 and AISI 904L Ramkumar K D, Chandrasekhar A Singh A K Ahuja S, Arivazhagan N, Metallography Microstructure and Analysis Scopus 21929270
67 Effect of Filler Metals on the Weldability and Mechanical Properties of Multi-pass PCGTA Weldments of AISI 316L Devendranath Ramkumar K, Maruthi Mohan Reddy P Raja Arjun B, Choudhary A Srivastava A, Arivazhagan N, Journal of Materials Engineering and Performance WoS 10599495
68 Effect of filler wires and direct ageing on the microstructure and mechanical properties in the multi-pass welding of Inconel 718 Devendranath Ramkumar K, Jagat Sai R Santhosh Reddy V, Gundla S Harsha Mohan T Saxena V, Arivazhagan N, Journal of Manufacturing Processes WOS 15266125
69 Effect of flux addition on the microstructure and tensile strength of dissimilar weldments involving Inconel 718 and AISI 416 Devendranath Ramkumar K, Dev S, Saxena V Choudhary A, Arivazhagan N, Narayanan S, Materials and Design WOS 18734197
70 Effect of GMAW process parameters on the influence of bead geometry and HAZ area on ASTM A516 grade 70 Low alloy Pressure vessel stee Anbarasan, R Oyyaravelu, P Kuppan, International Journal of TechnoChem Research Non- Scopus 23954248
71 Effect of Heating Mode and Electrochemical Response on Austenitic and Ferritic Stainless Steels Raja Annamalai, Anish Upadhyaya, Dinesh K Agrawal, Canadian Metallurgical Quarterly WoS 18791395
72 Effect of Heating Mode and Y2O3 Addition on the Electrochemical Response on Austenitic and Ferritic Stainless Steels Raja Annamalai, Anish Upadhyaya, Dinesh Agrawal, Corrosion Engineering Science and Technology WoS 17432782
73 Effect of non-ionic surfactant assisted modification of hexagonal boron nitride nanoplatelets on the mechanical and thermal properties of epoxy nanocomposites Monimoy Saha, Pankaj Tambe, Soumen Pal, Pravin Kubade, Geetha Manivasagam, M Anthony Xavior, Composite Interfaces WOS 15685543
74 Effect of optimal weld parameters in the microstructure and mechanical properties of autogeneous gas tungsten arc weldments of super-duplex stainless steel UNS S32750 Devendranath Ramkumar K, Arivazhagan N, Ganesh Raj B Vignesh K Thiruvengatam G, Sudharshan S, Materials and Design WOS 18734197
75 Effect of Pongamia Biodiesel On Emission and Combustion Characteristics Of DI Compression Ignition Engine Nanthagopal K, Thundil Karupparaj R, Ain Shams Engineering Journal Scopus 20904479
76 Effect of Precipitation Hardening on Particle Reinforced Aluminum Alloy Composites P Ashwath, M Anthony Xavior, International Mechanical Engineering Congress and Exposition Non- Scopus  
77 Effect of thermo mechanical processing on micro structure and electro chemical behavior of Ti Nb Zr V new metastable beta titanium biomedical alloy Mohsin Talib Mohammed, M Geetha, Transactions of Nonferrous Metals Society of China WOS 22103384
78 Effect of using hydrogen mixed gases as a fuel in internal Combustion engines A Review Premkartikkumar SR, Pradeepkumar AR, International Journal of Innovative Research in Advanced Engineering Non- Scopus 23492163
79 Effects of Sexual Advertising on Customer Buying Decisions RaghuramJ, Ruchika Mahajan, Aayush Poddar, IOSR Journal of Business and Management Non- Scopus 2278487X
80 Efficacy and safety of 1 terbinafine hydrochloride versus 2 sertaconazole cream in the treatment of tinea corporis A Sumitha, M Geetha, GH Shashikala, HS Somashekar, KS Chandan, International Journal of Basic and Clinical Pharmacology Non- Scopus 23192003
81 E-Governance And Rural Development Varunkumar M, Venugopal P, International Journal of Applied Engineering Research Scopus 9739769
82 Emerging Market Nexus for Cross Listed Stocks Empirical evidence from India Visalakshmi S, Kavitha Shanmugam, International Journal of Economic Research Scopus 9729380
83 Empathizing Customer Experience A Critical Stride Of Customer Experience Management Venugopal Pulidindi, Varunkumar M, Australian Journal of Basic and Applied Sciences Non- Scopus 23098414
84 Employer Branding Dimensions A Discriminant Analysis Approach In Campus Recruitment V Samuel Rajkumar, V Padmanand, P Ganesan, Pulidindi Venugopal, Global Management Review Non- Scopus 9739947
85 Energy efficient power generation systems at low and medium heat recoveries shankar ganesh N, srinivas t, international journal of energy technology and policy Scopus 1741508X
86 Energy Recovery Analysis through Adding Solid Food Waste Pulverizer for the Existing Biogas Plant Mohanasaravanan P S, Prabhakar M, Kannan C, Ganesh Karthikeyan M, Jayasingh T, International Journal of Engineering and Management Research Non- Scopus 22500758
87 Enhancement of bioactivity of titanium carbonitride nanocomposite thin films on steels with biosynthesized hydroxyapatite VV Anusha Thampi, B Subramanian, P Dhandapani, Geetha Manivasagam, International journal of nanomedicine WoS 11782013
88 Environment-assisted degradation of beta titanium alloy Ti- 15V-3Cr-3Al-3Sn Shakya S, M Nageswara Rao, Pant B, Mohan MK, International Journal of ChemTech Research Scopus 24559555
89 Ethics and Social Responsibility in Indian Textile Industry Venugopal P, Chanakya International Journal of Business Research Non- Scopus 23952830
90 Evaluation of solution treated Ti-15-3 alloy for naval fastener applications Hanuma Reddy T, Nageswara Rao M, Mohan MK, Pant B, Journal of Corrosion Science and Engineering Scopus 14668858
91 Experimental analysis of augmented desalination by cooling integration C Chiranjeevi, T Srinivas, Energy Procedia Scopus 18766102
92 Experimental and simulation studies on two stage humidification dehumidification desalination and cooling plant C Chiranjeevi, Srinivas T, Desalination WOS 18734464
93 Experimental Investigation On Dynamic Characteristics Of Unidirectional And Woven Glass Fiber Laminated Composite Plates With And Without Cut-Outs Manoharan R, International Journal of Applied Engineering Research Scopus 9739769
94 Experimental investigations and parametric analysis of magnetic field assisted abrasive finishing of SS316L Kanish T C, Kuppan P, Narayanan S, DenisAshok, International journal of Manufacturing Technology and Management Scopus 17415195
95 Experimental investigations of fracture and fatigue crack growth of copper steel joints arc welded using nickelbase filler M Velu, Sunil Bhat, Materials and Design WOS 18734197
96 Experimental studies on cooling desalination plant C Chiranjeevi, T Srinivas, Proceedings of fifth ICAER    
97 Experimental Study on Cutting Tool Wear Behavior of Sintered Extruded P M Alloy Steels S Senthur Prabu, S Prathiba, Nipun Mittal, Sreelekh M K, M Sridhar Babu, K Vignesh, International Journal of ChemTech Research Scopus 24559555
98 Fatigue Life Prediction and Durability test of passenger car Rheocast Aluminium Steering Knuckle Siddesh Gowda KG, Avjot Singh Ghai, Sagar Polisetti, Shashank Tiwari, B Ashok, Journal of Materials Science and Surface Engineering Scopus 23488956
99 Fine tuning of fuel maps using data acquisition system on a FSAE car Yagnavalkya Mukkamala, Sparsh Sharma, Ujjwal Pandey, International Journal of Applied Engineering Research Scopus 9739769
100 Flaw detection and characterization in butt friction stir welded joints of aluminium 6061 alloy Ritu Jacob, RajKumar E, International Journal of Applied Engineering Research Scopus 9739769
101 Flexural analysis of coir fibre reinforced hybrid polymer matrix composites venkatachalam, Gautham Shankar, Gupta, Gautham Shankar, Composites Mechanics computations applications Non- Scopus 21522073
102 Flow and thermal development in wire-wrapped fuel pin bundle of sodium cooled Fast Reactor during low flow conditions Govindha Rasu N, Velusamy K, Sundararajan T, Chellapandi P, Progress in Nuclear Energy WoS 1491970
103 Flow Distribution Comparison Between Circular And Triangular Header Of Compact Heat Exchanger Kalidasan B, Edison Gundabattini, International journal of Applied Engineering research Scopus 9739769
104 Formability Evaluation of AA 6061 Alloy Sheets on Single Point Incremental Forming using CNC Vertical Milling Machine Pandivelan C, Jeevanantham AK, Journal of Materials and Environmental Science Scopus 20282508
105 Friction Behaviour of Hybrid Composite of Basalt Fiber with Titanium Oxidem Barium Sulphate and Silicon Carbide Narendiranath Babu T, Manvel Raj T, Rama Prabha D, International Journal of ChemTech Research Scopus 2455-9555
106 Fuzzy logic based fuel flow control system in a dual-fuel diesel engine V Abhijith, M Antony Richard, Renjith Ravi, S DENIS ASHOK, ASHOK B, Indian Journal of Science and Technology Scopus 0974-645
107 Health Monitoring of Surface Wear of TiN and AlCrN Based PVD Coated Bearings Using Statistical Values of Vibration Signals Niranjan Hiremath, Mallikarjuna Reddy, Shivasharanayya Swamy, Journal of Materials Science and Surface Engineering Scopus 2348-956
108 High Pressure Combined Solar Desalination System and Power Cycle Ramesh Kumar VK, Edison Gundabattini, Rajkumar P, Rajendran PR, ARPN Journal of Engineering and Applied Sciences Scopus 1819-608
109 Hydrogen permeation analysis of corrosion of stainless steel in pickling solution S Karthikeyan, P A Jeeva, International Journal of ChemTech Research Scopus 24559555
110 Impact analysis of vehicle chassis made of polymer metal hybrids venkatachalam, Gautham Shankar, Varun, Vimal, Gautham Shankar, Composites Mechanics computations applications Non- Scopus 21522073
111 Impact of Consumers Decision Making Process on Purchasing of Mobile Phones Kavarthapu Vishnu Tejaswi, Seema A, GE International Journal of Management Research Scopus 23211709
112 Impact of Mentoring on Career Success An Empirical Study In an Indian Context Seema A, Sujatha S, International Journal of Engineering Technology Science and Research Non- Scopus 23943386
113 Impact of Working Environment And Productivity Improvement on Assembly Line Through Reduction of Down Time- A Lean Approach Narendiranath Babu T, Rama Prabha D, International Journal of Chemical Sciences Scopus 0972768X
114 Implementation of Karakuri Kaizen in Material Handling Unit Dhiyaneswar Rani, B Ashok, A K Saravanan, Mohammad Rafiq Agrewale, SAE Technical Papers Scopus  
115 Improvement of microstructure and mechanical behavior of gas tungsten arc weldments of alloy C-276 by current pulsing Nageswara Rao M, Arivazhagan N, Madhusudhan Reddy G, Manikandan M, Acta Metallurgica Sinica English Letters WOS 21941289
116 Indian customers and retailers perception towards cellular service providers with special reference to BSNL Suraj Kushe Shekhar, Business Excellence and Management Non- Scopus 22481354
117 Influence of Exhaust Gas Recirculation, and Injection Timing on the Combustion, Performance and Emission Characteristics of a Cylinder Head Porous Medium Engine Vijayakumar Thulasi, Journal of Thermodynamics Non- Scopus  
118 Influence of filler metals in the control of deleterious phases during the multi-pass welding of Inconel 718 plates Devendranath Ramkumar K, Jagat Sai R Sridhar G Santhosh Reddy V, Prabaharan P, Arivazhagan N, Sivashanmugham N, Acta Metallurgica Sinica English Letters WOS 21941289
119 Influence of Forging Parameters on the Mechanical Behavior and Hot Forgeability of Aluminium Alloy PK AjeetBabu, M R Saraf, K C Vora, Suraj ManiChaurasiya, Kuppan, Materials Today: Proceedings Scopus 22147853
120 Influence Of Mql Application On Surface Roughness Cutting Force And Tool Wear For Milling Of Monel 400 Akhil Soman, Vignesh Shanbhag, Sakthivel M, P Kuppan International Journal of Mechanical and Production Engineering Non- Scopus 23212071
121 Influence of Physicochemical Properties of Al2O3 Nanofluid as Coolant in Automotive Radiator Test rig and Multi Response Optimization of Heat Transfer Rate using Taguchis Orthogonal Array Kannan C, Vijayakumar T, International Journal of ChemTech Research Scopus 24559555
122 Influence of reinforcement shape on flexural properties of additive manufactured multi material polymer structure Sugavaneswaran M, Arumaikkannu G, Vijay Anand R, Additive Manufacturing Journal Scopus 22148604
123 Influence of thermomechanical processing on biomechanical compatibility and electrochemical behavior of new near beta alloy Ti206 Nb136 Zr05 V Mohsin Talib Mohammed, Zahid A Khan, Geetha Manivasagam, Arshad N Siddiquee, International journal of nanomedicine WoS 11782013
124 Influence of thermomechanical processing on microstructure mechanical properties and corrosion behavior of a new metastable beta titanium biomedical alloy Mohsin Talib Mohammed, Zaid A Khan, M Geetha, Arshad N Siddiquee, Prabhash Mishra, Bulletin of Materials Science Scopus 9737669
125 Information technology influence on indian healthcare Swamy T, Venugopal P, International Journal of Applied Engineering Research Scopus 9739769
126 Innovative method of empirical mode decomposition as spatial tool for structural damage identification Mallikarjuna Reddy D, Praveen Krishna, Structural Control and Health Monitoring WOS 15452263
127 Investigation and Evaluation Of Hygrothermal Effects On GFRP And CFRP Deepa A, Kaustav Chakraborty, Disha Sarkar, NASASXIX    
128 Investigation of Al7050 reinforced with graphene through stir cast process Venkatesan S, Anthony Xavior M, International journal of applied engineering research Scopus 9739769
129 Investigation of Indian IT Society Using Management Information System Varunkumar M, Venugopal P, Australian Journal of Basic and Applied Sciences Non- Scopus 23098414
130 Investigation on interlaminar shear stresses in laminated composite beam under thermal and mechanical loading Murugesan N, Vasudevan R, Steel and Composite Structures WoS 15986233
131 Investigations On Effect Of Lean Combustion On Performance And Emission Characteristics For LPG Engine Ravi K, Porpatham E, Pradeep Bhasker J, International Seminar on Renewable Energy and Sustainable Development Non- Scopus  
132 Investigations on structure property relationships of activated flux TIG weldments of super-duplex austenitic stainless steels Devendranath Ramkumar K, Bajpai A, Raghuvanshi S, Arivarasu M, Singh A, Materials Science and Engineering A WoS 9215093
133 Investigations on Structure Property Relationships of Inconel 718 and AISI 430 Dissimilar Weldments Ramkumar K D, Saxena V Mohan H Pandey R, Metallography Microstructure and Analysis Scopus 21929270
134 Investigations on structure-property relationships of activated flux TIG weldments of super duplex austenitic stainless steels Devendranath Ramkumar K, Bajpai A Raghuvanshi S Singh A, Chandrasekhar A, Arivazhagan N, Materials Science and Engineering A WoS 9215093
135 Investigations on tensile strength of jute fibre reinforced hybrid polymer matrix composites Graceraj, Venkatachalam, Engineering Review Scopus 13309587
136 Investigations on the structure - Property relationships of electron beam welded Inconel 625 and UNS 32205 Devendranath Ramkumar K, Arivazhagan N, Oza S Saxena V Hidad P, Sridhar R Periwal S, Materials and Design WOS 18734197
137 Issues and challenges faced by organised and unorganised retail outlets of food and grocery in India - an empirical study Vasumathi, R Subashini, international journal of Services and Operations Management Scopus 17442389
138 Knowledge Sharing Culture- An Effective Knowledge Management Initiative R Subashini, International Journal of Business and Administration Research Review Non- Scopus 2347856X
139 Lean Sigma A Turnaround Strategy For Service Sector Organizations Murugavel R, R S Mani, K Revathi, Intl Jl of Mgt and Social Science Research Review Non- Scopus 23496746
140 LPG diesel dual fuel engine A critical review Ashok B, Denis Ashok S, Ramesh Kumar C Alexandria Engineering Journal Scopus 11100168
141 Metallurgical and mechanical characterization of dissimilar welds of austenitic stainless steel and super-duplex stainless steel - A comparative study Devendranath Ramkumar K, Singh A, Solanki T, Arivarasu M, Arivazhagan N, Journal of Manufacturing Processes WOS 15266125
142 Metallurgical and mechanical characterization of electron beam welded super-duplex stainless steel UNS 32750 Ramkumar K D, Mishra D Vignesh M K Raj B G, Arivazhagan N, Naren S V Kumar S S, Journal of Manufacturing Processes WOS 15266125
143 Microstructural characterization of dissimilar welds between Incoloy 800H and 321 Austenitic Stainless Steel Arivazhagan N, Sayiram G, Materials Characterization WOS 18734189
144 Microstructure and Corrosion Behaviour of Plasma Sprayed Bilayered Ceramic Coatings S Sathish, M Geetha, Transactions of the Indian Ceramic Society WOS 21655456
145 Microstructure and mechanical properties of alloy C-276 weldments fabricated by continuous and pulsed current gas tungsten arc welding techniques Nageswara Rao M, Arivazhagan N, Madhusudhan Reddy G, Manikandan M, Journal of Manufacturing Processes WOS 15266125
146 Microstructure mechanical properties and electrochemical behavior of a novel biomedical titanium alloy subjected to thermo-mechanical processing including aging Mohsin Talib Mohammed, Zahid A Khan, M Geetha, Arshad N Siddiquee, Journal of alloys and compounds WOS 18734669
147 Mobile number portability and consumer behaviour a study with reference to Bharat Sanchar Nigam Limited India Suraj Kushe Shekhar, Hyperion Economic Journal Non- Scopus 23437995
148 Novel Approach to Automatically Generate Feasible Assembly Sequence Aniket Kavlekar, Ishan Kossambe, Arun Tom Mathew, Indian Journal of Science and Technology Scopus 9745645
149 Numerical investigation of double-diffusive mixed convection laminar flow in two sided lid driven porous cavity Lokesh Agarwal, Satheesh A, C G Mohan, Heat Transfer Asian Research Scopus 15231496
150 Online Shopping Behavior R SUDHAKAR, International Journal of Applied Engineering Research Scopus 9739769
151 Optimal distribution of discrete heat sources under natural convection using ANN - GA based technique Tapano Kumar Hotta, S P Venkateshan, Heat Transfer Engineering WoS 15210537
152 Optimal layout of a partially laminated composite magnetorheological fluid sandwich plate Manoharan R, Vasudevan R, Jeevanantham AK, Smart Structures and Systems WoS 17381584
153 Optimal layout of a partially treated laminated composite magnetorheological fluid sandwich plate Manoharan R, Vasudevan R, Jeevanantham AK, Smart Structures and Systems WoS 17381584
154 Optimal lot sizing and inventory decisions in a centralised and decentralised two echelon inventory system with price dependent demand Dega Nagaraju, A Ramakrishna Rao, S Narayanan, International Journal of Logistics Systems and Management Scopus 17427975
155 Optimality Of Inventory Decisions In A Joint Two-Echelon Inventory System With And Without Fuzzy Demand Vineet Mittal, Dega Nagaraju, S Narayanan, International Journal of Applied Engineering Research Scopus 9739769
156 Optimization of Gasoline Engine Flywheel using Alternate Materials for Improving Performance Characteristics Shubham Gupta, Karan Kothari, Jay P Mishra, B Ashok, Indian Journal of Science and Technology Scopus 9745645
157 Optimization of MFAAF Process Parameters using Particle Swarm Optimization Kanish T C, Vijith Kalathil, Senthil Kumar S, International Journal of Applied Engineering Research Scopus 9739769
158 Perception of Doctors on the Acceptance and Use of Telemedicine Sivaji Jinka, Pulidindi Venugopal, Global Management Review Non- Scopus 9739947
159 Performance characteristics of electroless Ni-P-Cu and Ni-P-Cu-pvp composite coatings Hareesh P, S Karthikeyan, K Raja, P A Jeeva, International Journal of Applied Engineering Research Scopus 9739769
160 Performance of Environmental Friendly Dielectric Fluid in Powder-Mixed Electrical Discharge Machining khalid Hussain Syed, Kuppan P, International Journal of ChemTech Research Scopus 24559555
161 Powder-Mixed EDM Machining of Aluminium-Silicon Carbide Composites Khalid Hussain Syed, Anuraag G P, Anuraag G P, Indian Journal of Science and Technology Scopus 9745645
162 Power spectral density analysis of pressure fluctuation in pneumatic conveying of powders Niranjana Behera, V K Agarwal, Mark Jones, K C Williams, Particulate Science and Technology WOS 15480046
163 Prediction of tensile strength on hybrid composite of basalt fiber with titanium oxide barium sulphate and silicon carbide Narendiranath Babu T, Ditto Ramesh, Suryavishnu, Rama Prabha D, International Journal of ChemTech Research Scopus 24559555
164 Preparation and evaluation of the cytotoxic nature of TiO2 nanoparticles by direct contact method M Chellappa, U Vijayalakshmi, U Anjaneyulu, M Geetha, International journal of nanomedicine WoS 11782013
165 Problems and Prospects of Rural Marketing Anjani Devi, Venugopal Pulidindi, Indian Journal of Commerce and management Non- Scopus 22295674
166 Promises of silent salesman to the FMCG industry an investigation using linear discriminant analysis approach Suraj Kushe Shekhar, Raveendran P T, Management and Marketing Scopus 20698887
167 Pulsed current and dual pulse gas metal arc welding of grade AISI 310S austenitic stainless steel Mathivanan A, Devakumaran K, A senthil kumar, Defence Technology Scopus 22149147
168 Quality management in information system development units - An empirical study Murugavel R, Intl Journal of Applied Engineering Research Scopus 9739769
169 Quantum mechanical and corrosion studies of electrochemically oxidized aluminium surfaces S Karthikeyan, P A Jeeva, Journal of Corrosion Science and Engineering Scopus 14668858
170 Quantum mechanical and hydrogen permeation studies on the corrosion of stainless steel in acid medium using a novel inhibitor S Karthikeyan, p a jeeva, K Raja, Der Pharmacia Lettre Scopus 9755071
171 Quantum mechanical investigations for auto catalytic copper plating process K Raja, S Karthikeyan, P A Jeeva, International Journal of ChemTech Research Scopus 24559555
172 Real time rule based scheduling system for integrated delivery in a semiconductor manufacturing using evolutionary algorithm based simulation approach V K Manupati, A S Revanth, International Conference on ICCCPT ICAIECES Springer Verlag    
173 Recent nontraditional optimization techniques for Assembly sequence planning RajKumar E, Raj Kumar E, Annamalai k, International Journal of Pure and Applied Mathematics Scopus 13143395
174 Reconfiguration of Networked Seru Production systems in an Indian Perspective V K Manupati, T Vemkata Deepthi, K Ramakotaiah, S S Rao, International Conference on Industrial Engineering and Operations Management    
175 Reducing Starting Current for Existing Commercial Vehicle Engines Suresh Kumar Gurusamy, B Ashok, Chandrasekar Rajagopalan, R Sateesh Kumar, SAE Technical Papers Scopus  
176 Reduction of hydrogen embrittlement and green inhibition of stainless steel pipes in acid environment K Raja, S Karthikeyan, P A Jeeva, International Journal of ChemTech Research Scopus 24559555
177 Review of Drag Reduction Techniques for Hypersonic Flows Bibin John, International Journal of Applied Engineering Research Scopus 9739769
178 Selection and Prioritization of Luggage Bag Designs Using Combined AHP and TOPSIS Methodology Shivang Gupta, Shaurabh Kumar Singh, Kunal Agrawal, Dega Nagaraju, International Journal of Applied Engineering Research Scopus 9739769
179 Single Phase Flow and Heat Transfer and Pressure Drop Measurements in Doubly Enhanced Tubes Ratnesh Raj, Yagnavalkya Mukkamala, Narender Shankar Lakshman, International Journal of Thermal Sciences Scopus 12900729
180 Sliding wear characteristics of Basalt Fiber with GE Epoxy Al2O3 Sic hybrid Composites for Journal bearing material using Fish Oil Lubricant Narendiranath Babu T, Manvel Raj T, Rama Prabha D, International Journal of ChemTech Research Scopus 24559555
181 Sliding wear characteristics of Biaxial Glass Fiber with Epoxy Al2O3 Sic hybrid Composites for journal bearing liner using Sea Water Lubricant Narendiranath Babu T, Rama Prabha D, International Journal of ChemTech Research Scopus 24559555
182 Social media and brand loyalty Gangadhar R, Venugopal Pulidindi, Kumar P Vijaya, International Journal of Physical and Social Sciences Scopus 22495894
183 Solar Thermal Power and Desalination System Ramesh Kumar VK, Edison Gundabattini, Rajkumar P, Rajendran PR, International Journal of Applied Engineering Research Scopus 9739769
184 Solid state synthesis and characterization of calcium phosphate for biomedical application Arkin V H, U Narendra Kumar, Meenu Lakhera, I Manjubala, International Journal of ChemTech Research Scopus 24559555
185 Special Schemes And Announcements Of State Government And Central Government Towards It Infrastructure Development Facilitating Rural Economy Development Varunkumar M, Venugopal Pulidindi, Australian Journal of Basic and Applied Sciences Non- Scopus 23098414
186 Structure-property relationships of PCGTA welds of Inconel X750 in as-welded and post-weld heat treated conditions - A comparative study Ramkumar K D, Krishnan S R Ramanand R, Logesh S Satyandas T Ameer A, Arivazhagan N, Journal of Manufacturing Processes WOS 15266125
187 Studies on behaviour of a DI diesel engine fuelled with bio oil biodiesel emulsions R Prakash, R K Singh, S Murugan, International Journal of Oil Gas and Coal Technology WoS 17533317
188 Studies on energy penetration and marangoni effect during laser melting process Arivazhagan N, Antony K, Journal of Engineering Science and Technology Scopus 18234690
189 Studies on La based intermetallic hydrides to determine their suitability in metal hydride based cooling systems Vinod Kumar Sharma, E Anil Kumar, International Journal of Hydrogen Energy WOS 18793487
190 Studies on microstructure and mechanical properties of keyhole mode NdYAG laser welded Inconel 625 and duplex stainless steel SAF 2205 Devendranath Ramkumar K, Kuppan P, Kothari K Sridhar R, Kumar P, Sai Radhakrishna V, Journal of Materials Research WOS 20445326
191 Studies on the reduction of mild steel corrosion and hydrogen permeation in acidic media S Karthikeyan, P A Jeeva, K Raja, M Paramasivam, Journal of Corrosion Science and Engineering Scopus 14668858
192 Studies on the weldability microstructure and mechanical properties of activated flux TIG weldments of Inconel 718 Devendranath Ramkumar K, Arivazhagan, Materials Science and Engineering A WoS 9215093
193 Studies on the weldability microstructure and mechanical properties of flux assisted Nd YAG laser welds of AISI 904L K Devendranath Ramkumar, Gangineni Chaitanya, Jelli Lakshmi Narasimha Varma, N Arivazhagan, R Oyyaravelu, Journal of Materials Research WOS 20445326
194 Study of viscosity and specific heat characteristics of water based Al2O3 nanofluids at low particle concentrations Y Raja Sekhar, K V Sharma, Journal of Experimental Nanoscience WoS 17458099
195 Study on solar geometry with tracking of collector Natarajan M, srinivas t, Applied solar energy Scopus 19349424 
196 Synthesis and In-Vitro Electrochemical Study of Composite Coatings on Implant by Electrophoretic Deposition M Chellappa, U Vijayalakshmi, U Anjaneyulu, M Geetha, Journal Of The Indian Chemical Society Scopus 194522
197 The Impact Of Customer Service On Customer Relationship Management A Study in Bharti Axa Life Insurance of Chennai Tamil Nadu Pulidindi Venugopal, Aswini Priya, Global Management Review Non- Scopus 9739947
198 The impact of demographic profile on emotional intelligence among the faculty members performance in the educational institutions in Tamil Nadu India-an empirical study Vasumathi, T Sagayamary, R Subashini, International journal of Services and Operations Management Scopus 17442389
199 The Impact of Emotional Intelligence on Work Life Balance-An Empirical Study Among Faculty Members Performance in Educational Institutions at Tamil Nadu India Vasumathi, T Sagayamary, R Subashini, Pertanika journal of social science and humanities Scopus 22318534
200 The influence of an eco-friendly antibiotic as anti-scalant and inhibitor for steel in gypsum solution and brine water N V Lakshmi, S Karthikeyan, p a jeeva, M Paramasivam, S Narayanan, Desalination and Water Treatment Scopus 19443986
201 The influence of emotional intelligence on work-life balance of faculty members performance and satisfaction in the educational institutions using multivariate analysis India-an empirical study T Sagaya Mary, Vasumathi, R Subashini, international journal of Services and Operations Management Scopus 17442389
202 The influence of SERVQUAL dimensions on customer loyalty in banking sector India-an empirical study Vasumathi, R Subashini, International journal Services and Operations Management Scopus 17442389
203 The mechanical buckling of Assessment of curvilinear composite laminates with material discontinuities and environmental effects A Venkatachari, S Natarajan, S Natarajan, M Ganapathi, M Haboussi, Composite Structures WoS  02638223
204 The role of strategic human resource management SHRM impacting employees performance through perceived organisational support in a manpower agency of international airlines at Chennai International Airport Tamil Nadu India - an empirical study C Colin Crispin, Vasumathi, R Subashini, international journal of Services and Operations Management Scopus 17442389
205 Theoretical Investigation of Waste Heat Recovery from an IC Engine Using Vapor Absorption Refrigeration System and Thermoelectric Converter Ankit Sonthalia, Somesh Reddy, C Ramesh Kumar, Keval Kamani, Heat Transfer Asian Research Scopus 15231496
206 Theoritical Study on Various Types of NACA Aerofoil Profiles A Critical Review V Ajay, B Venkateshwarlu, Mohan Jagadeesh Kumar, Innovations in Mechanical Engineering    
207 Thermal performance of biomass plant with triple generation system Srinivas T, Reddy BV, Gupta , International Journal of Green Energy WoS 15435083
208 Thermodynamic analysis of 150 MW thermal power plant with combined effect of constant steam inlet steam pressure 130 bar and different steam inlet temperatures in circulated fluidized bed combustion technology power plant Naveen Kumar, Edison Gundabattini, Ratan P Bagade, International journal of Applied Engineering research Scopus 9739769
209 Thermodynamic optimization of Kalina power systems suitable for low medium and high temperature heat recoveries shankar ganesh, srinivas t, International Journal of Application of Engineering and Technology Non- Scopus 23953594
210 Thermodynamic study on cogeneration system in a cement factory pradeep varma, srinivas t, International Journal of Application of Engineering and Technology Non- Scopus 23953594
211 Tool Wear Analysis of Al 6061 reinforced with 10 wt Al2O3 Using High Hardened Inserts Vignesh M, Venkatesan K, Ramanujam R, Vijayan S, Applied Mechanics and Materials Scopus 16627482
212 Tribological and corrosion behaviors of warm-and hot-rolled Ti-13Nb-13Zr alloys in simulated body fluid conditions Taekyung Lee, Geetha Manivasagam, Eshaan Mathew, Santhosh Rajaraman, Ashok Kumar Singh, Chong Soo Lee, International journal of nanomedicine WoS 11782013
213 Tribological Behavior of Particles and Fiber Reinforced Hybrid Nanocomposites Akash Mohanty, Vijay Kumar Srivastava, Tribology Transactions WoS 1547397X
214 Use of new multi-layered coated carbide insert for machining aluminium metal matrix composites reinforced with alumina particles experimental approach Ramanujam R, Rahul A, Manu Antony, Ram Praful C, International Journal of Applied Engineering Research Scopus 9739769
215 Using hydrogen as a fuel in diesel engine A Review Premkartikkumar SR, International Journal of ChemTech Research Scopus 24559555
216 Variation Of Gaseous Fuel Flow Rate In A Dual-Fuel Diesel Engine Using Fuzzy Logic V Abhjith, U B Gokulraj, K Somasundaram, B Ashok, S Denis Ashok, C Ramesh Kumar, Journal of Chemical and Pharmaceutical Sciences Scopus 23498552
217 Velocity Profile in an Axial Fan using five hole probe through experimental investigation Edison Gundabattini, John Samuel K, International journal of Applied Engineering research Scopus 9739769
218 Vibration analysis of a tapered laminated thick composite plate with ply drop-offs Edwin sudhagar P, Vasudevan R, Ananda Babu A, Jeyaraj P, Archive of Applied Mechanics WoS 14320681
219 Vibration analysis of laminated composite sandwich plate using finite element analysis Manoharan R, Shedbale Indrajeet B, Charapale Utkarsh D, Kurhe Nikhil M, International Journal of Applied Engineering Research Scopus 9739769
220 Vibration Characteristics of Journal Bearing with Various Damping materials Narendiranath Babu T, Rama Prabha D, International Journal of Vehicle Structures and Systems Scopus 9753540
221 Vibration signal based multifault diagnosis of gears using roughset integrated PCA and neural networks Devendiran S, Manivannan K, International Journal of Mechanical and Mechatronics Engineering Scopus 2077124X
222 Wear Behaviour of Hybrid Composite of Basalt Fiber with Titanium Oxide Barium Sulphate and Silicon Carbide Narendiranath Babu T, Ditto Ramesh, Rama Prabha D, Lavanya T, International Journal of ChemTech Research Scopus 24559555
223 Wear studies on plasma sprayed Al2O3 and 8mole of Yttrium-stabilized ZrO2 composite coating on biomedical Ti 6Al 4V alloy for orthopedic joint application Perumal Ganapathy, M Geetha, Asokamani Rajamanickam, Alagumurthi Natarajan, International journal of nanomedicine WoS 11782013

2014

Sl No Title of paper Name of the author/s Name of journal Indexed InScopus / WOS/Pub Med / ICI / Non Scopus ISSN number
1 A CFD investigation on fluid dynamic gauging Bharani Kumar K V, R Thundil Karuppa Raj, Dhyan Shankar M P, ARPN Journal of Engineering and Applied Sciences Scopus 1819-6608
2 A comparative study on analytical and experimental buckling stability of metal matrix composite columns with fixed & hinged ends Narasimha, G. Bala, M. Vamsi Krishna, Anthony M. Xavior International Journal of Applied Engineering Research Scopus 0973-9769
3 A Conceptual Framework of Mentoring on Career Success Seema A, Sujatha S, International Research Journal of Business And Management Non- Scopus 2322 083X
4 A Fuzzy Logic based Model to predict the improvement in surface roughness in Magnetic Field Assisted Abrasive Finishing Kanish T C, Kuppan P, Narayanan S, Denis Ashok S, Procedia Engineering Elsevier publisher Scopus 1877-7058
5 A Gear fault identification using wavelet transform rough set based GA ANN and C4 5 algorithm Rajeswari C, Rajeswari c, Sathiyabama, S Devendiran, manivannan K, Procedia Engineering Scopus 1877-7058
6 A questionnaire survey of pediatric inflammatory bowel disease in India Malathi Sathiyasekaran, Sumathi Bavanandam, Srinivas Sankaranarayanan, Neelam Mohan, M Geetha, Nishanth Wadhwa, Indian Journal of Gastroenterology Scopus 2548860
7 A review on conventional and laser assisted machining of aluminium based metal matrix composites venkatesan, Ramanujam, kuppan, Engineering Review Scopus 13309587
8 A Study On Aluminum Matrix And Various Reinforcements Of Composites Processed By Stir Casting Method S Venkatesan, M Anthony XAvior, International Journal of Scientific Research and Engineering Studies Non- Scopus 2349-8862
9 A Survey on Occurrence of Critical Machines in a Manufacturing Environment R Pugazenthi, M Anthony Xavior, Procedia Engineering Scopus 1877-7058
10 A Two Stage Finite Element Analysis of Electromagnetic Forming of Perforated Aluminium Sheet Metals N Senthilnathan, G Venkatachalam, Nilesh N Satonkar, Procedia Engineering Scopus 1877-7058
11 A typical manufacturing plant layout design using CRAFT algorithm Hari Prasad N, Rajyalakshmi G, Srinivasula reddy A, Procedia Engineering Scopus 1877-7058
12 Aerodynamic study of formula SAE car Sneh Hetawal, Mandar Gophane, B.K. Ajay, Yagnavalkya Mukkamala, Procedia Engineering Scopus 1877-7058
13 Air oxidation and molten salt corrosion studies on bimetallic boiler steel at elevated temperatures Manikandan M, Devendranath Ramkumar K, Arivarasu M, Arivazhagan N, Appala Naidu A, Kumaresh Babu S P, Journal of Corrosion Science and Engineering Scopus 1466-8858
14 AlON A-pillars: Enhancing passenger safety and driver visibility Rawat, S., Das, S.K. SAE Technical Papers Scopus 1487191
15 An Experimental Investigation and Performance Evaluation of 1 5 TR Window Air Conditioner by Using R 22 R 407C and R 410A by Varying the Capillary Pitch John Samuel Koppula, Dr Govindarajulu K, Edison Gundabattini, World Applied Sciences Journal Scopus 1991-6426
16 Analysis of cutting forces and temperature in laser assisted machining of inconel 718 using taguchi method Venkatesan K, Ramanujam R, Kuppan P, Procedia Engineering Scopus 1877-7058
17 Analysis of strain hardening behaviour of cast aluminium alloy 354 subjected to artificial ageing at various temperatures Eswar A, M Nageswara Rao, Babu GD, Gupta A, Advanced Materials Research Scopus 1662-8985
18 Analysis of tool life during turning operation by determining optimal process parameters CJ Rao, D Sreeamulu, Arun Tom Mathew, Procedia Engineering Scopus 1877-7058
19 Analysis on the load carrying mechanism integrated as heterogeneous Co-operative manipulator in a walking wheelchair Vedaraj, I.S.R., Jain, R., Rao, B.V.A. IOP Conference Series: Materials Science and Engineering Scopus 1757-899X
20 Analyzing the profile modification of truck-trailer to prune the aerodynamic drag and its repercussion on fuel consumption Chaitanya Chilbule, A. Upadhyay, Yagnavalkya Mukkamala, Procedia Engineering Scopus 1877-7058
21 Application of hybrid MCDM techniques for prioritising the gaps in an agile manufacturing implementation project S Aravind Raj, S Vinodh, WS Gaurav, S Shiva Sundaram, International Journal of Services and Operations Management Scopus 1744-2389
22 Assessment of corrosion behaviour of Aerospace materials in marine environments by Tafels potentiodynamic polarization studies Rajkumar V, Arivazhagan N, International Journal of ChemTech Research Scopus 2455-9555
23 Assessment of mechanical properties of AISI 4140 and AISI 316 dissimilar weldments Arivazhagan N, Devendranath Ramkumar K, Kumar SNS, Prashanth MM, William AAS, Reddy MP, Procedia Engineering Scopus 1877-7058
24 Assessment of mechanical properties of PCGTA weldments of inconel 625 Devendranath Ramkumar K, Arivazhagan N, Narayanan S, Bhushan M, Korrapati PK Avasarala VK, Procedia Engineering Scopus 1877-7058
25 Assessment on the Metallurgical and Mechanical Properties of SA 210 A1 Rifle Tubular Joints S Senthur Prabu, K Devendranath Ramkumar, N Arivazhagan, S Narayanan, Saurabh Garg, Rahul Dayal, Procedia Engineering Scopus 1877-7058
26 Azithromycin A potential corrosion inhibitor for aluminum 2024 in acidic medium Lakshmi N V, Karthikeyan S, Arivazhagan N, Journal of Corrosion Science and Engineering Scopus 1466-8858
27 Bacterial adherence and biofilm formation on medical implants a review Suganthan Veerachamy, Prasad KDV Yarlagadda, Tejasri Yarlagadda, Geetha Manivasagam, Journal of Engineering in Medicine WOS 9544119
28 Bearing fault diagnosis using wavelet packet transform hybrid PSO and support vector machine Devendiran S, Manivannan K, Procedia Engineering Scopus 1877-7058
29 Biodegradable Mg and Mg based alloys for biomedical implants G Manivasagam, S Suwas, Materials Science and Technology WOS 1743-2847
30 Carbon nanomaterials grown on E-glass fibers and their application in composite Ariful Rahaman, K K Kar, Composites Science and Technology WOS 0266-3538
31 CARI - A heuristic approach to machine-part cell formation using correlation analysis and relevance index N Srinivasa Gupta, B Valarmathi, D Devika, International Journal of Production Research WOS 1366-588X
32 CFD analysis of a kerosene fuel tank to reduce liquid sloshing Singal, V., Bajaj, J., Awalgaonkar, N., Tibdewal, S. Procedia Engineering Scopus 1877-7058
33 Characterization of metallurgical and mechanical properties of commercially pure copper and AISI 304 dissimilar weldments Chethan Roy, Arivarasu M, Hari P R, Manikandan M, Devendranath Ramkumar K, Arivazhagan N, Procedia Materials Science Scopus 2211-8128
34 Characterization of microstructure and mechanical properties of inconel 625 and AISI 304 dissimilar weldments Arivazhagan N, Devendranath Ramkumar K, Narayanan S, Gokul Kumar K, Mithilesh P Varun D, Reddy Gopi Reddy A, ISIJ International WOS 1347-5460
35 Characterization of microstructure and mechanical properties of Super Ni 718 alloy and AISI 316L dissimilar weldments Prabaharan P, Devendranath Ramkumar K, Arivazhagan N, Journal of Materials Research WOS 2044-5326
36 Characterization of microstructure strength and toughness of dissimilar weldments of inconel 625 and duplex stainless steel SAF 2205 Sridhar R, Devendranath Ramkumar K, Arivazhagan N, Acta Metallurgica Sinica English Letters WOS 2194-1289
37 Characterization of oxide scales to evaluate hot corrosion behavior of ZrO2 and Al2O3-TiO2 plasma sprayed superalloy Arivarasu M, Devendranath Ramkumar K, Arivazhagan N, Manikandan M, Hari P R, Katiki K Yadlapati S Chidepudi S N S, International Journal of ChemTech Research Scopus 2455-9555
38 Characterization of weld strength and impact toughness in the multi-pass welding of super-duplex stainless steel UNS 32750 Devendranath Ramkumar K, Arivazhagan N, Thiruvengatam G, Sridhar R, Sudharsan SP Mishra D, Materials and Design WOS 1873-4197
39 Combined two stage desalination and cooling plant C Chiranjeevi, Srinivas T, Desalination WOS 1873-4464
40 Combustion and Performance Characteristics of a Small Spark Ignition Engine Fuelled with HCNG C Ramesh Kumar, Ankit Sonthalia, Udit Sharma, Anirudh Punganur, Sohail Abbas, Journal of Engineering Science and Technology Scopus 1823-4690
41 Comparative assessment on microstructure and mechanical properties of continuous and pulse-current GTA welds of AISI 304 and Monel 400 N. Arivazhagan, S. Narayanan, Kovove Materialy WOS 1338-4252
42 Comparative high temperature corrosion studies on Zirconium Dioxide coated inconel 625 in air and molten salt environment Katiki K, Hari P R, Arivarasu M, Manikandan M, Devendranath Ramkumar K, Arivazhagan N, International Journal of ChemTech Research Scopus 2455-9555
43 Comparative studies of high and low frequency pulsing on the aspect ratio of weld bead in gas tungsten arc welded AISI 304L Plates Arivarasu M, Devendranath Ramkumar K, Arivarasu M, Procedia Engineering Scopus 1877-7058
44 Comparative studies on the Corrosion and Scratchbehaviors of Plasma sprayed ZrO2 and WC-Co coatings S Sathish, R Asokamani, M Geetha, Procedia Materials Science Scopus 2211-8128
45 Comparative study of composites reinforced with SiC and TiB2 Johny James, kuppan, venkatesan, Ramanujam, Procedia Engineering Scopus 1877-7058
46 Comparative study on mechanical and metallurgical properties of AA6061 aluminum alloy sheet weld by pulsed current and dual pulse gas metal arc welding processes Mathivanan A, Devakumaran K, A senthil Kumar, Materials and Manufacturing Processes WOS 1532-2475
47 Comparision of TiAlN AlCrN and AlCrN-TiAlN Coatings for Cutting Tool Applications Sampath Kumar T, Balasivanandha Prabu, Geetha Manivasagam, Padmanabhan KA, International Journal of Minerals Metallurgy and Materials WOS 1869-103X
48 Comparison on cyclic air oxidation and synthetic molten salt corrosion for bimetallic compound employed in power plant environment Gokulkumar K, Devendranath Ramkumar K, Arivazhagan N, International Journal of ChemTech Research Scopus 2455-9555
49 Computational Analysis Of Two Phase Flow Distribution In AHorizonatal Pipe Jagan V, Satheesh A, Mohan Babu K, Santhosh kumar D, Applied Mechanics and Materials Scopus 1662-7482
50 Computational investigation of glare with several cracks and delaminations under monotonic and cyclic loads of constant amplitude Bhat, S., Patibandla, R. Mechanics of Advanced Materials and Structures WOS 1537-6532
51 Computational studies of swirl ratio and injection timing on atomization in a direct injection diesel engine Manimaran R, R Thundil Karuppa Raj, Frontiers in Heat and Mass Transfer Scopus 2151-8629
52 Control of Yaw Disturbance Using Fuzzy Logic Based Yaw Stability Controller Krishna, Narayanan, Denis Ashok, International Journal of Vehicular Technology
53 Controlled dissolution of aluminum 2024 in acidic medium N V Lakshmi, S Karthikeyan, N Arivazhagan, Journal of Corrosion Science and Engineering Scopus 1466-8858
54 Corrosion and hardness characteristics of metalized ABS plastics prepared by FDM rapid prototyping process K Raja, S Karthikeyan, C D Naiju, S Narayanan, P A Jeeva, Journal of Corrosion Science and Engineering Scopus 1466-8858
55 Corrosion and hydrogen orrosion permeation investigations of Stainless steel 304 in acidic solutions N V Lakshmi, S Karthikeyan, P A Jeeva, Journal of Corrosion Science and Engineering Scopus 1466-8858
56 Corrosion resistance studies of SS316L surface generated by magnetic field assisted abrasive finishing T C Kanish, P Kuppan, S Narayanan, S Karthikeyan, Journal of Corrosion Science and Engineering Scopus 1466-8858
57 Corrosion studies of trimetallic material in synthetic sea water environment Arivarasu M, Arivazhagan N, Devendranath Ramkumar K, International Journal of ChemTech Research Scopus 2455-9555
58 Corrosion tensile and hardness studies of autocatalytic Nickel Coating on Al 2024 A Sankar Kumar, S Karthikeyan, G Venkatachalam, P A Jeeva, Journal of Corrosion Science and Engineering Scopus 1466-8858
59 Degumming of Pongamia Pinnata by Acid and Water Degumming Methods Vinayak Kulkarni, Sanchit Jain, Faizan Khatri, Vijayakumar T, International Journal of ChemTech Research Scopus 2455-9555
60 Design and analysis of a centrifugal absorber for suppression of helicopter blade vibration Amburay K, Vasudevan R, Po SS, International Journal of Structural Engineering Scopus 1758-7336
61 Design and analysis of an automotive vacuum pump Thaslim A A, Kumar S J, Jayachandran A, Damodaran D, Vasudevan R, Applied Mechanics and Materials Scopus 1662-7482
62 Design and development of stamping dies for online maintenance Jai Hindus, S. ARPN Journal of Engineering and Applied Sciences Scopus 1819-6608
63 Design and development of XY micro-positioning stage using modified topology optimization technique RAMESH T, BHARANIDARAN R, GOPAL V, Applied Mechanics and Materials Scopus 1662-7482
64 Design and Simulation of Automotive Seat Height Adjuster Driving Mechanism Based on Multi Body Dynamics Rahul Dilip Nandurkar, Akash Mohanty, P Barath, Applied Mechanics and Materials Scopus 1662-7482
65 Design and simulation of bore well rescue robot - advanced Nithin, G., Gowtham, G., Venkatachalam, G., Narayanan, S. ARPN Journal of Engineering and Applied Sciences Scopus 1819-6608
66 Design for fatigue and simulation of glass fibre/epoxy composite automobile leaf spring Bhanage, A., Padmanabhan, K. ARPN Journal of Engineering and Applied Sciences Scopus 1819-6608
67 Design of fuel tank baffles to reduce kinetic energy produced by fuel sloshing and to enhance the product life cycle Bageerathan T, R Thundil Karuppa Raj, G Edison, ARPN Journal of Engineering and Applied Sciences Scopus 1819-6608
68 Design of low Temperature Flashing System Desalination Plant using Brine Solution Heat Load Ramesh Kumar VK, Rajkumar PR, Baskar P, Edison Gundabattini, Research Journal of Recent Sciences Non- Scopus 2277?2502
69 Design Strategy for Improving the Energy Efficiency in Series Hydraulic Electric Synergy System R Ramakrishnan, Somashekhar S Hiremath, Singaperumal M, The International Journal of Energy WOS 0360-5442
70 Development and analysis of a new integrated power and cooling plant using LiBr H2O mixture Shankar r, Srinivas t, Sadhana Academy Proceedings in Engineering Sciences WOS 0973-7677
71 Development of Acoustic Emission and Motor Current Based Fuzzy Logic Model for Monitoring Weld Strength and Nugget Hardness of FSW Joints Senthil Kumar S, Senthil kumar S, Denis Ashok S, Procedia Engineering Scopus 1877-7058
72 Dry sliding wear behaviour of Industrial semi-crystalline and crystalline polymers S Senthur Prabu, Saurabh Garg, Kuldeep Deshmukh, G Manikandan, C Sriram, International Journal of ChemTech Research Scopus 2455-9555
73 Dynamic characterization of a laminated composite magnetorheological fluid Manoharan R, Vasudevan R, Jeevanantham AK, Smart Materials and Structures WOS 1361-665X
74 Effect of carbon nanotubes on the curing and thermomechanical behavior of epoxy carbon nanotubes composites Ariful Rahaman, Akash Mohanty, Polymer Composites WOS 1548-0569
75 Effect of heat treatment on mechanical properties and corrosion behaviour on ASTM A36 mild steel Ravikirana, K., Rajasekhar, B., Laxmi Bhavani, P., Pavithra, O., Devi, E.L.P., RajaAnnamalai, A., Siva, T. Journal of Corrosion Science and Engineering Scopus 1466-8858
76 Effect of heat treatment, mechanical properties studies and corrosion response on Manganese bronze Neeraja, D., Prasad, B., Raja Annamalai, A., Siva, T. Journal of Corrosion Science and Engineering Scopus 1466-8858
77 Effect of laser scan speed on surface temperature cutting force and tool wear during laser assisted machining of Alumina P Kuppan, A senthil kumar, Venkatesh Kannan M, Ramesh Kumar K, John Rozario Jegaraj J, Procedia Engineering Scopus 1877-7058
78 Effect of Lubricating Oil on the Performance of Vapour Compression Refrigeration System Kiranmai, John Samuel Koppula, Edison Gundabattini, World Applied Sciences Journal Non- Scopus 1991-6426
79 Effect of measurement parameters on hydrogen storage and thermodynamic properties of La based metal hydrides Vinod Kumar Sharma, E Anil Kumar, International Journal of Hydrogen Energy WOS 1879-3487
80 Effect of non-conventional aging treatments on the tensile properties and Quality indices of hipped components made of cast aluminum alloy 354 Dinesh babu G, M Nageswara Rao, Advanced Materials Research Scopus 1662-8985
81 Effect of optimal weld parameters in the microstructure and mechanical properties of autogeneous gas tungsten arc weldments of super-duplex stainless steel UNS S32750 Devendranath Ramkumar, K., Mishra, D., Ganesh Raj, B., Vignesh, M.K., Thiruvengatam, G., Sudharshan, S.P., Arivazhagan, N., Sivashanmugam, N., Rabel, A.M. Materials and Design WOS 1873-4197
82 Effect of pongamia biodiesel on emission and combustion characteristics of di compression ignition engine K Nanthagopal, R Thundil Karuppa Raj, Ain Shams Engineering Journal Scopus 2090-4479
83 Effect of sky scrapers on natural ventilation patterns and human comfort index in low-risebuildings - a CFD analysis over central Mumbai Nagawkar, J., Ghosh, S., Kataria, R., Nashit, A., Deora, A. ARPN Journal of Engineering and Applied Sciences Scopus 1819-6608
84 Effect of sodium alginate modification of graphene (by 'anion-?' type of interaction) on the mechanical and thermal properties of polyvinyl alcohol (PVA) nanocomposites Thayumanavan, N., Pankaj Tambe, Girish Joshi, Mukul Shukla Composite Interfaces WOS 1568-5543
85 Effect of various pretreatment methods on osmotic dehydration of fruits for qualitative and quantitative advantage Josephine Selvi, N., Baskar, G., Singh, A. International Journal of ChemTech Research Scopus 2455-9555
86 Effective Conversion of Kapok Seed Ceiba Pentandra Oil into Biodiesel and Investigation of Effects of Catalyst concentrations and Chromatographic Characterization M A Asokan, R Vijayan, International Journal of ChemTech Research Scopus 2455-9555
87 Effective Health care management in India- The role of knowledge management Kartik Balkumar, Resmi Ann Thomas, S P Anbuudayasankar, S Paul Silvian, Gemini V Joy, International Journal of Value Chain Management Scopus 1741-5365
88 Electrochemical and Quantum Mechanical Aspects of Electroless Copper Plating Process Sundaramali, Karthikeyan S, Jeeva P A, International Journal of ChemTech Research Scopus 2455-9555
89 Electroless copper deposition- An experimental and theoretical approach S Rekha, S Karthikeyan, P A Jeeva, D Kumaran, K N Srinivasan, International Journal of ChemTech Research Scopus 2455-9555
90 Enterprise Transformation A Need For Survival And Growth InSmall Scale Fabrication Units Vezhavendhan R, Chinmoy Sarkar, Procedia Engineering Scopus 1877-7058
91 Evaluation of properties for Al-SiC reinforced metal matrix composite for brake pads R Abhik, V Umasankar, M Anthony Xavior, Procedia Engineering Scopus 1877-7058
92 Examination of the lattice boltzmann method in simulation of manufacturing Perumal D A, R Thundil Karuppa Raj, Agarwal L, Harshan A, K Nanthagopal, ARPN Journal of Engineering and Applied Sciences Scopus 1819-6608
93 Executives Perception on the Outcomes of Inhouse and Outdoor Training Programmes Giasuddin Bellary, Venugopal P, Ganesan P, No, No, No, Asian Social Science Non- Scopus 1911-2025
94 Experimental and theoretical studies on static and dynamic pressure concentration isotherms of hydride Vinod Kumar Sharma, E Anil Kumar, M Prakash Maiya, S Srinivasa Murthy, International Journal of Hydrogen Energy WOS 1879-3487
95 Experimental evaluation of the influence of processing parameters on the mechanical properties of SiC particle reinforced AA6061 aluminium alloy matrix composite by powder processing V Umasankar, M Anthony Xavior, S Karthikeyan, Journal of Alloys and Compounds WOS 1873-4669
96 Experimental investigation on static mechanical properties of glass carbon hybrid woven fabric composite laminates Murugan, R., Ramesh, R., Padmanabhan, K., Jeyaraam, R., Krishna, S. Advanced Materials Research Scopus 1662-8985
97 Experimental investigation on the influence of oil mist parameters on minimum quantity lubricated grinding of Inconel 751 A S S Balan, L Vijayaraghavan, R Krishnamurthy, International Journal of Precision Technology Scopus 1755-2079
98 Experimental Investigations on the electrochemical machining characteristics of monel 400 alloys and optimization of process parameters Kalaimathi, Venkatachalam, Sivakumar, Jordan Journal of Mechanical and Industrial Engineering Scopus 1995-6665
99 Experimental study and computer modelling of the beta to alpha plus beta phase transformation in Ti15 3 alloy under isothermal conditions Naven M, M Nageswara Rao, Santhosh R, Geetha M, Journal of Alloys and Compounds WOS 1873-4669
100 Experimental study on dry sliding wear behaviour of sintered Fe C W P M low alloy Steels S Senthur Prabu, Ayush Choudhary, Anshul Jain, Ashu Sharma, Procedia Materials Science Scopus 2211-8128
101 Electrochemical and Quantum Mechanical Aspects of Electroless Copper Plating Process Sundaramali, G., Jeeva, P. A., Karthikeyan, S. International Journal of ChemTech Research Scopus 2455-9555
102 Exploring the Fences Pertaining to Non Espousal of Traditional Knowledge Based Medicines at Shervaroy Hills Eastern Ghats India S Usha, V Seetharam, R Siva, Asian Social Science Non- Scopus 1911-2025
103 Fabrication surface morphology and corrosion investigation of Al 7075-Al2O3matrix composite in sea water and industrial environment N N Yalamoori, V V Shanbhag, S Karthikeyan, R Ramanujam, K Venkatesan, Procedia Engineering Scopus 1877-7058
104 Fabrication testing and analysis of braided and short fibre reinforced jute epoxy bio-composite Raman S, Salil kumar C S, sharan chandran, International Journal of ChemTech Research Scopus 2455-9555
105 Finite element analysis of jute fibre made hybrid polymer matrix composite Prasad, V., Venkatachalam, G., Rathi, A., Rajakumar, S. Applied Mechanics and Materials Scopus 1662-7482
106 Formability Analysis of Al 5052 in Single Point Incremental Forming Pandivelan C, Jeevanantham AK, International Journal of Applied Engineering Research Scopus 0973-9769
107 Forty criteria based agility assessment using scoring approach in an Indian relays manufacturing organization S Aravind Raj, S Vinodh, Journal of Engineering Design and Technology Scopus 1726-0531
108 Fracture toughness evaluation technique for metal matrix composites using ball indentation method V Umasankar, M Anthony Xavior, International Journal of Computer Aided Engineering and Technology Scopus 1757-2665
109 Free Vibration Analysis of a Carbon Nanotube Reinforced Composite Beam Naresh B, Vasudevan R, Ananda Babu A, Edwin sudhagar P, Anisa Thaslim A, Applied Mechanics and Materials Scopus 1662-7482
110 Free Vibration Analysis of a Width Tapered Laminated Composite Beam Aayush Chandrawanshi, Bhaiyat A Jain, Ananda Babu A, Edwin Sudhagar P, Vasudevan R, Applied Mechanics and Materials Scopus 1662-7482
111 Friction stir welded butt joints of AA2024 T3 and AA7075 T6 aluminum alloys Devendranath Ramkumar K, Arivazhagan N, Manikandan M, Narayanan S, Avinash P, Procedia Engineering Scopus 1877-7058
112 Fuzzy Inference System for Prediction During Precision Turning Of Ti-6al-4v M Anthony Xavior, R Vinayagamoorthy, Procedia Engineering Scopus 1877-7058
113 Fuzzy logic based yaw stability control for active front steering of a vehicle S Krishna, S NARAYANAN, DENISASHOK, Journal of Mechanical Science and Technology WOS 1976-3824
114 Graphene reinforced metal matrix composite GRMMC a review Prashantha Kumar H G, M Anthony Xavior, Procedia Engineering Scopus 1877-7058
115 Hardness and corrosion resistance characteristics of trivalent chromium electrodeposition - an eco friendly process T Mari, S Karthikeyan, P A Jeeva, Wilson H Vincent, G Kannan, Journal of Corrosion Science and Engineering Scopus 1466-8858
116 Heat transfer and fluid flow analysis of flat surface with artificially roughened square transverse wire rib for application in solar air heater Thundil Karupaaraj, R., Raja Sekhar, Y., Edison, G., Sai Praneeth, B., Elango, T. ARPN Journal of Engineering and Applied Sciences Scopus 1819-6608
117 High temperature corrosion behavior of PCGTA weldments of monel 400 and AISI 304 exposed in the molten salt environment at 600C Narayanan S, Devendranath Ramkumar K, Arivazhagan N, International Journal of ChemTech Research Scopus 2455-9555
118 High temperature studies on welded joint in molten salt power plant environments Arivarasu M, Arivazhagan N, Manikandan M, Gokulkumar K, Raj Kumar V, Devendranath Ramkumar K, International Journal of ChemTech Research Scopus 2455-9555
119 Hot Corrosion Behavior of Monel 400 and AISI 304 Dissimilar Weldments Exposed in the Molten Salt Environment Containing Na2SO4 + 60% V2O5 at 600 °C N. Arivazhagan, S. Narayanan, Debidutta Mishra, Materials Research WOS 1980-5373
120 Hot corrosion studies on welded dissimilar boiler steel in power plant environment under cyclic condition Appala Naidu A, Manikandan M, Kumaresh Babu S P, Arivarasu M, Devendranath Ramkumar K, Arivazhagan N, International Journal of ChemTech Research Scopus 2455-9555
121 Hybrid aluminium metal matrix composite reinforced with SiC and TiB2 Kuppan P, Johny James S, Venkatesan K, Ramanujam R, Procedia Engineering Scopus 1877-7058
122 Hybrid solar-biomass power plant without energy storage srinivas t, reddy bv, Case Studies in Thermal Engineering Scopus 2214-157X
123 Implementation of Genetic Algorithm in Network Modelling of Multi-level Reverse Logistics for Single Product Siva Prasad Darla, B Venkat Likhit, C D Naiju, Polu Vidya Sagar, Research Journal of Applied Sciences Engineering and Technology Scopus 2040-7467
124 Implementation of genetic algorithm in network modelling of multi-level reverse logistics for single product Darla, S.P., Naiju, C.D., Likhit, B.V., Sagar, P.V. Research Journal of Applied Sciences, Engineering and Technology Scopus 2040-7467
125 IMPLEMENTATION OF GENETIC ALGORITHM TO OPTIMIZE THE ASSEMBLY SEQUENCE PLAN BASED ON PENALTY FUNCTION Arun Tom Mathew, CSP Rao, ARPN Journal of Engineering and Applied Sciences Scopus 1819-6608
126 Increasing the probability of fault detection in non perfect inspection model of delay time analysis with compromise on inspection time Babu Chellappachetty, Raju R, Research Journal of Applied Sciences Scopus 1993-6079
127 Influence of Ageing Processes on the Microstructure, Mechanical Properties and Corrosion Behavior of Aluminum-Silicon Cast Alloys "Al- 6%Si-3%Cu" Swarupa, G., Gopikrishna, N., Ganesh, K., Hemani, S., Siva, T., Raja Annamalai, A. Journal of Corrosion Science and Engineering Scopus 1466-8858
128 Influence of cutting parameters on dry machining of inconel 625 alloy with coated carbide insert - a statistical approach Venkatesan K, Ramanujam R, Vimal Saxena, Chawdhury N, Choudhary V, ARPN Journal of Engineering and Applied Sciences Scopus 1819-6608
129 Influence of cutting parameters on machinability of inconel 718 alloy with coated carbide insert-a taguchi based fuzzy logic approach TFLA Ramanujam R, Venkatesan K, Vimal Saxena, Chawdhury N, Choudhary V, ARPN Journal of Engineering and Applied Sciences Scopus 1819-6608
130 Influence of fiber orientation and thickness on the response of glass epoxy composites subjected to impact loading Rahul Singh Sikarwar, R Velmurugan, N K Gupta, Composites PartB WOS 1359-8368
131 Influence of filler metals and welding techniques on the structure-property relationships of Inconel 718 and AISI 316L dissimilar weldments Devendranath Ramkumar K, Arivazhagan N, Choudhury D J, Patel S D Sri Praveen S, Prabaharan P, Xavior MA, Materials and Design WOS 1873-4197
132 Influence of heat treatment on surface morphology hardness wear and corrosion resistance of industrial phosphate coatings P A Jeeva, S Karthikeyan, S Narayanan, International Heat Treatment and Surface Engineering Scopus 1749-5156
133 Influence of nano particles reinforcement on the thermal and electrical properties of aluminium alloy matrix composites Umasankar, V., Anthony Xavior, M. International Journal of ChemTech Research Scopus 2455-9555
134 Influence of Nickel coating on flexural and dynamic behaviour of Aluminium A Sankarkumar, K Mohanam, G Venkatachalam, S Karthikeyan, S Narayanan, Procedia Engineering Scopus 1877-7058
135 Influence of post curing on the flexural properties of a rigid polyurethane or polyisocynurate foam-glass/epoxy face sheet sandwich composite Ostwal, R.S., Sawant, A.V., Dumre, A.A., Takalkar, A.R., Ramya, M., Padmanabhan, K. International Journal of ChemTech Research Scopus 2455-9555
136 Influence of rate of heating to aging temperature on precipitation hardening in a metastable beta titanium alloy Pande A, M Nageswara Rao, Sainis S, S Rajaraman, Manivasagam G, Advanced Materials Research Scopus 1662-8985
137 Influence of Titanium on dry sliding wear behaviour of sintered PM low alloy steel Fe-C-W S Senthur Prabu, S Prathibab, Venkatesan N, Ashu Sharma, Shakkeel Ahmed, Yesh A Shah, Procedia Engineering Scopus 1877-7058
138 Influences of tool geometry on metallurgical and mechanical properties of friction stir welded dissimilar AA 2024 and AA 5052 Arivazhagan N, Devendranath Ramkumar K, Narayanan S, Rajkumar V, Venkateshkannan M, Sadeesh P, Procedia Engineering Scopus 1877-7058
139 Inhibition performance of tobramycin on the dissolution of stainless steel 304 and ingress of hydrogen gas in acid medium S Karthikeyan, p a jeeva, S Narayanan, Journal of Corrosion Science and Engineering Scopus 1466-8858
140 Integration of solar thermal based power and cooling cycle with 50 50 power mass split ratio shankar r, srinivas t, International Journal of Applied Engineering Research Scopus 0973-9769
141 Investigation into the optimal fixturing cost of an assembly using genetic algorithm Raj Kumar E, Annamalai k, Engineering review Scopus 13309587
142 Investigation of cutting forces surface roughness and tool wear during Laser assisted machining of SKD11Tool steel P Kuppan, Xavierarockiaraj S, P Kuppan, Procedia Engineering Scopus 1877-7058
143 Investigation of emissions and combustion characteristics of a CI engine fueled with waste cooking oil methyl ester and diesel blends Nantha Gopal K, Nanthagopal K, Arindam Pal, Sumit Sharma, Charan Samanchi, Sathyanarayanan K, Alexandria Engineering Journal Scopus 1110-0168
144 Investigation of Mechanical Properties of Alumina Nano-particle-Loaded Hybrid GlassB Carbon Fiber Reinforced Epoxy Composites Akash Mohanty, Vijay Kumar Srivastava, Pulya Umamaheswar Sastry, Journal of Applied Polymer sCIENCE WOS 1097-4628
145 Investigation of Microstructure and Mechanical Properties of Super Alloy C-276 by Continuous Nd YAG laser Welding Manikandan M, P R Hari, Arivarasu M, Devendranath Ramkumar K, Arivazhagan N, Procedia Materials Science Scopus 2211-8128
146 Investigation on Adhesive Wear Behaviour of Industrial Crystalline and Semi Crystalline Polymers against Steel Counterface S Senthur Prabu, S Prathiba, Ashu Sharma, Saurabh Garg, G Manikandan, C Sriram, International Journal of ChemTech Research Scopus 2455-9555
147 Investigation on hot corrosion behavior of plasma spray coated nickel based superalloy in aggressive environments at 900 C Prasad K, Arivazhagan N, Manikandan M, Arivarasu M, Devendranath Ramkumar K, Antony K, International Journal of ChemTech Research Scopus 2455-9555
148 Investigation on interlaminar shear stresses in laminated composite plates under thermal and mechanical loading Murugesan N, Vasudevan R, Applied Mechanics and Materials Scopus 1662-7482
149 Investigation on tensile behavior of gongura fibre made hybrid polymer matrix composite Revanthkumar, Viswanath, Venkatachalam, International Journal of Nano and BioMaterials Scopus 1752-8941
150 Investigation on the corrosion behavior of the bilayered ceramic coatings deposited using atmospheric plasma spraying S Sathish, M Geetha, CS Swaminathan, C Senthilvel, B Dilip Jerold, Mohd F Shabir, Procedia Technology Scopus 2212-0173
151 Investigation on the mechanical properties of SA 210 c tubular joints Senthur Prabu S, Devendranath Ramkumar K, Arivazhagan N, Narayanan S, Gopinath A, Jain A, Procedia Engineering Scopus 1877-7058
152 Investigations of surface texture generated by magnetic field assisted abrasive finishing Kanish T C, Kuppan P, Narayanan S, International Journal of Chem Tech Research Scopus 2455-9555
153 Investigations on dissimilar weldments of inconel 625 and AISI 304 Devendranath Ramkumar K, Arivazhagan N, Narayanan S, Mithilesh P, Varun D Reddy ARG, Procedia Engineering Scopus 1877-7058
154 Investigations on dry sliding wear behaviour of Sintered Extruded P M Alloy Steels Fe C W Ti s senthur prabu, s prathiba, M A Asokan, Anshul jain, Neeraj Kumar Jain, Procedia engineering Scopus 1877-7058
155 INVESTIGATIONS ON MACHINABILITY AND MACHINING CHARECTERISTICS OF HYBRID POLYMER Revanthkumar J, Rama Kishore Babu G, Thirupathi Reddy M, Venkatachalam G, Jeevanantham AK, Applied Mechanics and Materials Scopus 1662-7482
156 Investigations on mechanical and metallurgical properties of dissimilar continuous GTA welds of Monel 400 and C-276 Devendranath Ramkumar K, Arivazhagan N, Narayanan S, Agrawal M, Pandit S Joshi V, Manikandan M, Procedia Engineering Scopus 1877-7058
157 Investigations on the lubricated wear of direct metal laser sintered components for functional applications C D Naiju, P M Anil, Mohan Prashanth, S Karthik, ARPN Journal of Engineering and Applied Sciences Scopus 1819-6608
158 Investigations on the microstructure and mechanical properties of multi-pass pulsed current gas tungsten arc weldments of Monel 400 and Hastelloy C276 Devendranath Ramkumar K, Arivazhagan, Joshi V, Pandit S Agrawal M, Kumar O S Periwal S, Manikandan, Materials and Design WOS 1873-4197
159 Joint Two-Echelon Inventory Model for Optimal Inventory Decisions and Shipment Policies under Non-Linear Price Dependent Demand Burra Karuna Kumar, Dega Nagaraju, S Narayanan, Applied Mathematical Sciences Non- Scopus 1314-7552
160 Laser assisted machining of difficult to cut materials Research opportunities and future directions A comprehensive review Venkatesan K, Ramanujam R, Kuppan P, Procedia Engineering Scopus 1877-7058
161 Lattice Boltzmann simulation of flow over a circular cylinder at moderate reynolds numbers Arumuga Perumal, D., Kumar, G.V.S., Dass, A.K. Thermal Science WOS 2334-7163
162 Leadership Commitment Culture and Employee Turnover A deeper examination Resmi A T, Gemini VJ, Paul S S, Kannan K, International Journal of Enterprise Network Management Scopus 1748-1260
163 Life Cycle Estimation Of An Automotive Seat Recliner WithLCF Approach Nerella Srikanth, Jeevanantham AK, Ramalingam M, Applied Mechanics and Materials Scopus 1662-7482
164 Markov based exploration for aircraft design time compression Vasantharaju C, Ashok B, Naiju CD, ARPN Journal of Engineering and Applied Sciences Scopus 1819-6608
165 Measurement and analysis of reaction kinetics of La based hydride pairs suitable for metal hydride based cooling systems Vinod Kumar Sharma, E Anil Kumar, International Journal of Hydrogen Energy WOS 1879-3487
166 Measurement and simulation of hydrogen storage and thermodynamic properties of LaNiAl hydride Vinod Kumar Sharma, E Anil Kumar, International Journal of Applied Engineering Research Scopus 0973-9769
167 Mechanical characterization of Monel 400 and 316 stainless steel weldments Arivazhagan N, Devendranath Ramkumar K, Narayanan S, Srungavarapu P, Vignesh MK Raj BG, Mishra D, Procedia Engineering Scopus 1877-7058
168 Mechanical properties of electroless nickel coated ABS M30 plastics prepared by rapid prototyping process K Raja, C D Naiju, S Narayanan, Journal of Corrosion Science and Engineering Scopus 1466-8858
169 Metallization of ABS plastics prepared by FDM-RP process and evaluation of corrosion and hardness characteristics K Raja, S Karthikeyan, C D Naiju, S Narayanan, P A Jeeva, International Journal of ChemTech Research Scopus 2455-9555
170 Metallization of Fly Ash particles using Electroless Cobalt Plating process Sundaramali G, Karthikeyan S,Jeevanatham, Jeeva P A, International Journal of ChemTech Research Scopus 2455-9555
171 Metallurgical and mechanical characterization of electron beam welded super-duplex stainless steel UNS 32750 Devendranath Ramkumar, K., Mishra, D., Vignesh, M.K., Ganesh Raj, B., Arivazhagan, N., Naren, S.V., Suresh Kumar, S. Journal of Manufacturing Processes WOS 1526-6125
172 Metallurgical Characteristics of TiAlNAlCrN Coating Synthesized by the PVD Process on a Cutting Insert T Sampath Kumar, Geetha Manivasagam, S Balasivanandha Prabu, Journal of materials engineering and performance WOS 1544-1024
173 Micro-hardness and Youngs modulus of a thermo mechanically processed biomedical titanium alloy Mohsin Talib Mohammed, Arshad N Siddiquee, Zahid A Khan, M Geetha, Biomaterials and Biomechanics in Bioengineering Scopus 2465-9959
174 Micro-segregation studies on the Continuous Nd YAG Laser Beam Welded AISI 316L Arivarasu M, Hari P R, Gokulkumar K, Manikandan M, Devendranath Ramkumar K, Arivazhagan N, Procedia Engineering Scopus 1877-7058
175 Microstructural analysis and the influence of shot peening on stress corrosion cracking resistance of duplex stainless steel welded joints A Vinoth Jebaraj, L Ajay Kumar, Indian Journal of Engineering and Material Sciences WOS 0975-1017
176 Microstructure and mechanical properties of alloy C-276 weldments fabricated by continuous and pulsed current gas tungsten arc welding techniques Manikandan, M., Arivazhagan, N., Nageswara Rao, M., Reddy, G.M. Journal of Manufacturing Processes WOS 1526-6125
177 Minimizing material processing time and idle time of a critical machine in a flow shop R Pugazhenthi, M Anthony Xavior, Advanced Materials Research Scopus 1662-8985
178 MODELING OF TWO-ECHELON INVENTORY SYSTEM UNDER EXPONENTIAL PRICE DEPENDENT DEMAND Burra Karuna Kumar, Dega Nagaraju, S Narayanan, K Syam Sundar, ARPN Journal of Engineering and Applied Sciences Scopus 1819-6608
179 Modelling and electro-hygrothermo-mechanical reliability analyses of leadless dual IC packages Balaguru, K., Padmanabhan, K., Subeesh, S. International Journal of Computer Aided Engineering and Technology Scopus 1757-2665
180 Multi-Objective Optimization of Process Parameters for Electrochemical Machining of 6061Al 10Wt Al2O3 5 Wt SiC Composite using Hybrid Fuzzy Artificial Bee Colony Algorithm Ayyappan, Kalaimathi, Venkatachalam, Jordan Journal of Mechanical and Industrial Engineering Scopus 1995-6665
181 Multi-Objective Optimization of Single Point Incremental Sheet Forming of AA5052 using Taguchi based Grey Relational Analysis Coupled with Principal Component Analysis Pandivelan C, Jeevanantham AK, International Journal OfPrecision Engineering And Manufacturing WOS 2005-4602
182 Multi-response optimization using anova and desirability function analysis A case study in end milling of inconel alloy Ramanujam, venkatesan, Mithun Vasan, Lohithaksha M Maiyar, ARPN Journal of Engineering and Applied Sciences Scopus 1819-6608
183 Numerical analysis of helically coiled heat exchanger using CFD technique Manoj Kumar S, R Thundil Karuppa Raj, Aby Mathew C, Elango T, ARPN Journal of Engineering and Applied Sciences Scopus 1819-6608
184 Numerical and experimental investigations on laser melting of stainless steel 316L metal powders Antony K, Arivazhagan N, Senthilkumaran K, Journal of Manufacturing Processes WOS 1526-6125
185 Numerical assessment of material mismatch effect over mode i crack tip zones in glare Bhat, S., Narayanan, S. ARPN Journal of Engineering and Applied Sciences Scopus 1819-6608
186 Numerical investigation of fluid flow and heat transfer characteristics on the aerodynamics of ventilated disc brake rotor using CFD Ramachandran R, R Thundil Karuppa Raj, James M, Gatlewar S C, Thermal Science WOS 2334-7163
187 Numerical investigation on the aerodynamics and fuel consumption of a truck-trailer Mohan Jagadeesh Kumar M, Venkateshwarlu B, International Journal of Applied Engineering Research Scopus 0973-9769
188 Numerical simulation and experimental investigation of a topologically optimized compliant microgripper BHARANIDARAN R, T RAMESH, Sensors and Actuators A Physical WOS 0924-4247
189 Numerical simulation of heat transfer characteristics in the absorber tube of parabolic trough collector with internal flow obstructions R Thundil Karuppa Raj, Natarajan M, Raja Sekhar Y, T Srinivas, Gupta P, ARPN Journal of Engineering and Applied Sciences Scopus 1819-6608
190 Numerical simulation of mixed-convection in a lid-driven porous cavity using different nanofluids Nitesh Mittal, Satheesh A, D Santhosh kumar, Heat Transfer Asian Research WOS 1523-1496
191 On fabrication and testing of Glare Bhat, S., Narayanan, S. ARPN Journal of Engineering and Applied Sciences Scopus 1819-6608
192 On the air cleansing efficiency of an extended green wall A CFD analysis of mechanistic details of transport processes Sat Ghosh, SV Joshi, Journal of Theoretical Biology WOS 1095-8541
193 On the sustainability of the ancient ratnagiri university complex: A design reconstruction study Ghosh, S., Mathew, R., Gupta, P., Khanna, A., Saha, S. ARPN Journal of Engineering and Applied Sciences Scopus 1819-6608
194 Online prediction methodology on grinding wheel wear using wavelet analysis and datamining techniques Devendiran S, Manivannan K, International Journal of Applied Engineering Research Scopus 0973-9769
195 Optimal distribution of discrete heat sources under mixed convection heat transfer Tapano Kumar Hotta, S P Venkateshan, C Balaji, ASME Journal of Heat Transfer WOS 1528-8943
196 Optimal siting considerations for proposed and extant wind farms in india Vachaparambil, K.J., Philips, E.A., Issar, K., Parab, V., Bahadur, D., Gosh, S. Energy Procedia Scopus 1876-6102
197 Optimality of Cycle Time and Inventory Decisions in a Two Echelon Inventory System under Credit Period Seelam Krugon, Dega Nagaraju, S Narayanan, Procedia Engineering Scopus 1877-7058
198 Optimality of Inventory Decisions and Shipment Policies in a Two-Echelon Inventory System under Quadratic Price Dependent Demand Burra Karuna Kumar, Dega Nagaraju, S Narayanan, Procedia Engineering Scopus 1877-7058
199 Optimization of Inter Cellular Movement of Parts in Cellular Manufacturing System Using Genetic Algorithm Siva Prasad Darla, Polu Vidya Sagar, C D Naiju, B Venkat Likhit, Research Journal of Applied Sciences Engineering and Technology Scopus 2040-7467
200 Optimization of machining parameters using fuzzy based principal component analysis during dry turning operation of inconel 625 - A hybrid approach Ramanujam R, Venkatesan K, Vimal Saxena, Pandey R, Harsha T, Procedia Engineering Scopus 1877-7058
201 Optimization of Process Parameters for Detonation Gun Coating Process through Greyrelation Analysis K N BALAN, JOHN RAJAN A, Applied Mechanics and Materials Scopus 1662-7482
202 Optimization of the Pulsed Current Gas Tungsten Arc welding process parameters for alloy C-276 using the Taguchi method Manikandan M, Arivazhagan N, Nageswara Rao M, Madhusudhan Reddy G, Devendranath Ramkumar K, Ramanujam R, Procedia Engineering Scopus 1877-7058
203 Panel flutter characteristics of sandwich plates with CNT reinforced facesheets using an accurate higher-order theory A Sankar, S Natarajan, S Natarajan, M Ganapathi, K Ramajeyathilagam, M Haboussi, Fluids and Structures WOS 0889-9746
204 Parametric optimization of vapor power and cooling cycle shankar r, srinivas t, Energy Procedia Scopus 1876-6102
205 Parametric optimization on multi-objective precision turning using grey relational analysis R Vinayagamoorthy, M Anthony Xavior, Procedia Engineering Scopus 1877-7058
206 Performance Analysis of Single Module Thermoelectric Generator Somesh Reddy T, Ankit Sonthalia, C Ramesh Kumar, Advanced Materials Research Scopus 1662-8985
207 Performance evaluation of coated carbide inserts on dry machining of Al B4C metal matrix composites using Taguchis Robust design and weighted grey analysis Venkatesan K, Ramanujam R, ARPN Journal of Engineering and Applied Sciences Scopus 1819-6608
208 Performance of Coated and Uncoated Inserts during Intermittent Cut Milling of AISI 1030 Steel S lakshmanan, M Anthony Xavior, Procedia Engineering Scopus 1877-7058
209 Performance of plasma spray coatings on Inconel 625 in Air oxidation and molten salt environment at 800 c Katiki K, Arivazhagan N, Arivarasu M, Manikandan M, Devendranath Ramkumar K, International Journal of ChemTech Research Scopus 2455-9555
210 Polymer ceramic composite for bone regeneration application Basu Poulami, I Manjubala, B S Sharan, U Narendra Kumar, International Journal of ChemTech Research Scopus 2455-9555
211 Potentio dynamic corrosion studies of dissimilar metals in sea water environments using Tafels method Rajkumar V, Arivazhagan N, Journal of Corrosion Science and Engineering Scopus 1466-8858
212 Pressure Mapping through Experimental Investigation in an Axial Fan Using Five-Hole Probe Edison Gundabattini, John Samuel Koppula, World Applied Sciences Journal Non- Scopus 1991-6426
213 Processes development for high temperature solar thermal Kalina power station shankar ganesh N, srinivas t, Thermal science WOS 2334-7163
214 Processing and mechanical characterization of self reinforced polymer composite systems Sharan Chandran M, Padmanabhan K, Maxime, Constantaine, International Journal of ChemTech Research Scopus 2455-9555
215 Product visualization, realization and reliability of non-hermetically encapsulated integrated circuit packages Krishnan, P. ARPN Journal of Engineering and Applied Sciences Scopus 1819-6608
216 Quantum mechanical studies of a new inhibitor for the corrosion of mild steel in 2M sulphuric acid S Karthikeyan, k Raja, P A Jeeva, M Paramasivam, Journal of Corrosion Science and Engineering Scopus 1466-8858
217 Re-designing door handles to reduce aerodynamic drag in road vehicles Gautham Ramchadran, Archana Nepak, Yagnavalkya Mukkamala, 32ns AIAA Applied Aerodynamics Conference
218 Role of pulsed current on metallurgical and mechanical properties of dissimilar metal gas tungsten arc welding of maraging steel to low alloy steel Rajkumar V, Arivazhagan N, Materials and Design WOS 1873-4197
219 Segment optimization of a rotating multilayer sandwich beam Gupta S D, Vasudevan R, Journal of Sandwich Structures and Materials WOS 1530-7972
220 Shock Wave Boundary Layer interactions in hypersonic flows Bibin John, V Kulkarni, G Natarajan, International Journal of Heat Mass transfer WOS 0017-9310
221 Smart Cyclone Alert in the Indian Subcontinent Sat Ghosh, Sandeep Subramanian et al, Atmospheric Science Letters WOS 1530-261X
222 Some clarifications on the use of Mahalanobis distance for the machine-part cell formation problem N Srinivasa Gupta, D Devika, Vaibhav, International Journal of Advanced Manufacturing Technology WOS 1433-3015
223 Stochastic creep damage estimation in pipings with spatial non-Gaussian uncertainties using spectral stochastic finite element method Y Appalanaidu, Sayan Gupta, Yash Vyas, Procedia Engineering Scopus 1877-7058
224 Strain hardening behaviour of hipped and non-hipped castings of aluminium alloy 354 subjected to two-step ageing treatments Gupta A, M Nageswara Rao, Eswar A, Babu GD, Advanced Materials Research Scopus 1662-8985
225 Strength based Design optimization Studies on rigid polyurethane foam core-glass and carbon fabric epoxy matrix sandwich composites padmanabhan krishnan, Mechanics of Advanced Materials and Structures WOS 1537-6532
226 Studies on effect of tool design and welding parameters on the friction stir welding of dissimilar aluminium alloys AA 5052 - AA 6061 Arivazhagan N, Devendranath Ramkumar K, VenkateshKannan M, RajKumar V, Sadeesh P, Procedia Engineering Scopus 1877-7058
227 Studies on flexural optimization of glass fabric-epoxy skin/rigid foam core sandwich composites Suresh, E., Hemnath, T., Padmanabhan, K. International Journal of ChemTech Research Scopus 2455-9555
228 Studies on friction stir welding of aa 2024 and aa 6061 dissimilar metals Arivazhagan N, Devendranath Ramkumar K, Narayanan S, Venkatesh K M, Rajkumar V, Sadeesh P Avinash P, Procedia Engineering Scopus 1877-7058
229 Studies on single and duplex aging of metastable beta titanium alloy Ti-15V-3Cr-3Al-3Sn Santhosh, R., Geetha, M., Saxena, V.K., Nageswararao, M. Journal of Alloys and Compounds WOS 1873-4669
230 Studies on Surface Roughness of Al-SiC Composites Machined by Powder-Mixed EDM Khalid Hussain Syed, International Journal of Applied Engineering Research Scopus 0973-9769
231 Studies on welding of maraging steels Rajkumar V, N. Arivazhagan, K. Devendranath Ramkumar, Procedia Engineering Scopus 1877-7058
232 Studies on wettability of stainless steel 316L powder in laser melting process Antony K, Arivazhagan N, Senthilkumaran K, Journal of Engineering Science and Technology Scopus 1823-4690
233 Study of Cutting force and Surface Roughness in machining of Al alloy Hybrid Composite and Optimized using Response Surface Methodology Venkatesan K, Ramanujam R, Joel J, Jeyapandiarajan P, Vignesh M, Procedia Engineering Scopus 1877-7058
234 Study of fluid flow around impeller blades in rushton turbine in a baffled vessel using computational fluid dynamics Singh A D, R Thundil Karuppa Raj, Tare S, Varma S, ARPN Journal of Engineering and Applied Sciences Scopus 1819-6608
235 Study of Ground Water Contamination at Tamil Nadu Chromate Chemicals Limited Plant and Its Surrounding Area in SIPCOT Industrial Complex in Ranipet in Vellore District India Venkatesan N, Asokan M A, S Senthur prabu, Giriaj M, Vanitha D, International Journal of ChemTech Research Scopus 2455-9555
236 Study on power plants arrangements for integration srinivas t, reddy b v, Energy Conservation and Management WOS 0196-8904
237 Surface modification of Ti 13Nb 13Zr and Ti 6Al 4V using electrophoretic deposition EPD for enhanced cellular interaction S Bhawanjali, M Geetha, A Revathi, K C Popat, Materials Technology WOS 1753-5557
238 Synthesis and characterization of forsterite refractory by doping with kaolin Bhargavi Rani, A., Raja Annamalai, A.R., Majhi, M.R., Harish Kumar, A. International Journal of ChemTech Research Scopus 2455-9555
239 The characterization and behavior of Al2014 reinforced with Al2O3 fabricated by powder metallurgy Gaharwar, V.S., Umashankar, V. International Journal of ChemTech Research Scopus 2455-9555
240 The effect of ball milling and reinforcement percentage on sintered samples of aluminium alloy metal matrix composites P Ashwath, M Anthony Xavior, Procedia Engineering Scopus 1877-7058
241 The influence of cobalt coating on corrosion and functional properties of mild steel in 3 5 percent NACL K Mohanam, S Karthikeyan, G Venkatachalam, P A Jeeva, Journal of Corrosion Science and Engineering Scopus 1466-8858
242 The influence of electroless nickel coated SiC on the interface strength and microhardness of aluminium composites V Umasankar, S Karthikeyan, M Anthony Xavior, Journal of Materials and Environmental Science Scopus 2028-2508
243 The influence of rigid foam density on the flexural properties of glass fabric/epoxy-polyurethane foam sandwich composites Uday, C., Teja Varma, C.S., Kaushik Varma, B.N.S., Ramya, M., Padmanabhan, K. International Journal of ChemTech Research Scopus 2455-9555
244 The influence of sulfalene drug SFL on the corrosion and hydrogen permeation through stainless steel 304 in 5 percent NaCl-part I S Karthikeyan, P A Jeeva, M Paramasivam, Journal of Corrosion Science and Engineering Scopus 1466-8858
245 The link between salary and psychiatric problems among the industrial workers Syed Khalid Perwez, Ramaseshan H, Mohammad Manzoor, Swamy TNV, Asian Social Science Non- Scopus 1911-2025
246 The role of Supply Chain Management on Organised and Unorganised grocery retail retailers-A review on Indian Perspective RaghuramJ, Ravilochanan, Asian Social Science Non- Scopus 1911-2025
247 The use of artificial neural network for the prediction of wear loss of aluminium-magnesium alloys T Hariprasad, D Shivalingappa, A Nagaraj, Geetha Manivasagam, International Journal of Computer Aided Engineering and Technology Scopus 1757-2665
248 Thermodynamic performance evaluation of an AIR-AIR heat pipe heat exchanger Mandapati, M.J.K., Subhash Chandra, K., Sat Narayan, G. Thermal Science WOS 2334-7163
249 Use of strain energy density W and Qo as quality indices to study the effect of hipping on cast aluminium alloy 354 under different aging conditions Babu GD, M Nageswara Rao, Sibal P, Advanced Materials Research Scopus 1662-8985
250 Vibration analysis of a laminated composite magnetorheological elastomer sandwich beam RameshBabu V, Vasudevan R, Kumar K B N, Applied Mechanics and Materials Scopus 1662-7482
251 Vibration analysis of a partially treated laminated composite magnetorheological fluid sandwich plate Manoharan R, Vasudevan R, Jeevanantham AK, Journal of Vibration and Control WOS 1741-2986
252 Wear studies on plasma sprayed Al 2 O 3 40wt percentage 8YSZ composite ceramic coating on Ti 6Al 4V alloy used for biomedical applications G Perumal, N Alagumurthi, M Geetha, R Asokamani, wear WOS 1873-2577
253 Weibull analysis of the effect of interrupted aging treatments on the fatigue life of components made of cast Aluminium alloy 354 Sainis S, M Nageswara Rao, Kalra A, Babu GD, Advanced Materials Research Scopus 1662-8985
254 XPS analysis of corrosion resistant black trivalent chromium and ternary black Ni-Cu-Co electrodeposited automobile components P A Jeeva, S Karthikeyan, S Narayanan, Journal of Materials and Environmental Science Scopus 2028-2508