2020

1. Menon, U., Suresh, N., George, G., Ealias, A.M., Saravanakumar, M.P. “A study on combined effect of Fenton and Free Nitrous Acid treatment on sludge dewaterability with ultrasonic assistance: Preliminary investigation on improved calorific value”, Chemical Engineering Journal”, 2020 Vol. 382, Pg.No. 1230-35.

2. Yadav, A.L., Sairam, V., Muruganandam, L., Srinivasan, K.” An overview of the influences of mechanical and chemical processing on sugarcane bagasse ash characterisation as a supplementary cementitious material”, Journal of Cleaner Production”, 2020 Vol. 47(10), Pg.No. 1934-1945.

3. Saranya, D., Shanthakumar, S.” An integrated approach for tannery effluent treatment with ozonation and phycoremediation: A feasibility study”, Environmental Research”, 2020 Vol. 183,

4. Umamaheswari, J., Shanthakumar, S. “Optimization of temperature and inoculum size for phycoremediation of paddy-soaked rice mill wastewater”, Journal of Environmental Engineering (United States)”, 2020 Vol. 146, Issue 1.

5. Muthukumar, M., Shukla, S.K. “Comparative study on the behaviour of granular pile anchors and helical pile anchors in expansive soils subjected to swelling”, International Journal of Geotechnical Engineering, 2020 Vol. 14, Issue 1.

6. Teja K.V., Meena T. “An insight into temperature characteristics of ternary blended concrete with perlite powder”, Asian Journal of Civil Engineering, 2020, Vol. 9(4), Pg. No. 1229-1236.

7. Balasubramani D.P., Dodagoudar G.R. “Modelling the spatial variability of Standard Penetration Test data for Chennai City using kriging and product-sum model”, Geomechanics and Geoengineering, 2020.

8. Athiyamaan V., Mohan Ganesh G. “Experimental, statistical and simulation analysis on impact of micro steel – Fibres in reinforced SCC containing admixtures”, Construction and Building Materials, 2020 Vol. 246.

9. Vali K.S., Bala Murugan S. “Effect of different binders on cold-bonded artificial lightweight aggregate properties”, Advances in Concrete Construction, 2020 Vol. 9, Pg. No 183-193.

10. Palakuru M., Adamala S., Bachina H.B. “Modeling yield and backscatter using satellite derived biophysical variables of rice crop based on artificial neural networks”, Journal of Agrometeorology, 2020 Vol. 21, Pg. No. 171-175.

11. Kuun Reddy S.R., Bala Murugan S. “Experimental and microstructural assessment of ternary blended geopolymer concrete with different Na2SiO3-to-NaOH volume ratios”, Innovative Infrastructure Solutions, 2020.

12. John J., Bindu G., Srimuruganandam B., Wadhwa A., Rajan P. “Land use/land cover and land surface temperature analysis in Wayanad district, India, using satellite imagery”, Annals of GIS, 2020.

13. Mary Ealias A., Saravanakumar M.P. “A critical review on ultrasonic-assisted dye adsorption: Mass transfer, half-life and half-capacity concentration approach with future industrial perspectives”, Critical Reviews in Environmental Science and Technology, 2020, Vol. 49 , (21).

14. Kolathayar S., Sitharam T.G., Yang S. “Coastal reservoir strategy to enhance India’s freshwater storage by impounding river flood waters: A detailed overview”, Water Science and Technology: Water Supply, 2020, Vol. 19, Pg. No. 703-717.

15. Vigneshwaran S., Kumar S.V. “Urban land cover mapping and change detection analysis using high resolution sentinel-2A data”, Environment and Natural Resources Journal, 2020, Vol. 17, No. 1.

16. Kumar M.S., Senthilkumar R., Sourabha L. “Seismic performance of special concentric steel braced frames”, Structures, 2020.

17. Reddy A.N., Meena T. “An experimental study to find the optimum dosage of admixtures in blended concrete”, International Journal of Recent Technology and Engineering, 2020.

18. Venkatesan E., Mahindrakar A.B. “Forecasting floods using extreme gradient boosting – A new approach”, International Journal of Civil Engineering and Technology, 2020, Vol.10(2) , Pg. No. 1336-1346.

19. Manojkumar N., Srimuruganandam B. “Assessment of gaseous emissions and radiative forcing in Indian forest fires”, International Journal of Environmental Studies, 2020, Vol. 76, (4).

20. Vali K.S., Murugan S.B. “Properties of glass fiber reinforced cold-bonded artificial lightweight aggregates with different binders”, Revista Romana de Materiale/ Romanian Journal of Materials, 2020, Vol. 50(1),Pg. No. 40-50.

21. Jayasingh S., Selvaraj T. “Effect of Natural Herbs on Hydrated Phases of Lime Mortar”, Journal of Architectural Engineering, 2020, Vol. 26, Issue 3.

22. Teja K.V., Meena T. “Performance of ternary blended concrete and binary concrete made with Perlite powder at elevated temperatures”, Jordan Journal of Civil Engineering, 2020, Vol.14(2), Pg. No.198-209.

23. Durgadevagi S., Thirumalini S., Ravi R., Simona R. “Interaction of a viscous biopolymer from cactus extract with cement paste to produce sustainable concrete”, Construction and Building Materials, 2020, vol. 257,119585.

24. Tang V.T., Rene E.R., Fu D.F., Singh R.P., Behera S.K., Pugazhendhi A., “Effect of mixed microbial culture addition on enhanced river water quality: Pollutant removal and microbial community characteristics”, Environmental Technology and Innovation, 2020, Vol.18.

25. Hema Sumanth B., Vasugi K., “Effect of w/c ratio on the corrosion of rebar embedded in high strength concrete”, Journal of Corrosion Science and Engineering, 2020, Vol.23.

26. George G., Saravanakumar M.P., “Fabrication and performance analysis of a low cost, Pt free counter electrode using carbon coated ZnAl layered double hydroxide (C/ZnAl-LDH) for dye sensitized solar cells”, Solar Energy, 2020, Vol.202, Pg.No.144-154.

27. Nagajothi S., Elavenil S., “Effect of GGBS Addition on Reactivity and Microstructure Properties of Ambient Cured Fly Ash Based Geopolymer Concrete”, 2020, Silicon.

28. Devulapalli L., Kothandaraman S., Sarang G., “Effect of rejuvenating agents on stone matrix asphalt mixtures incorporating RAP”, Construction and Building Materials, 2020, Vol.254.

29. Palakuru M., Adamala S., Bachina H.B., “Spatial mapping of rice crop evapotranspiration in Godavari command area”, Indian Journal of Ecology, 2020, Vol.47, Issue 2, Pg.No.361-364.

30. Velvizhi G., Shanthakumar S., Das B., Pugazhendhi A., Priya T.S., Ashok B., Nanthagopal K., Vignesh R., Karthick C., “Biodegradable and non-biodegradable fraction of municipal solid waste for multifaceted applications through a closed loop integrated refinery platform: Paving a path towards circular economy”, Science of the Total Environment, 2020, Vol.731.

31. Warudkar A., Elavenil S., “A comprehensive review on abrasion resistance of concrete”, International Journal of Applied Science and Engineering, 2020, Vol.17, Issue 1.

32. Krishnan V., Solaiyan E., “Study on engineering and microstructural properties of ambient cured GP concrete produce from GGBS and M-Sand", Journal of Critical Reviews, 2020, Vol.7, Issue 7, Pg.No.499-506.

33. Desireddy S., P.C. S., R.L. M., Mehta A., “Development of an up-flow anoxic nano-biotechnological reactor for simultaneous removal of ammonia and COD from low C/N secondary treated wastewater”, Journal of Water Process Engineering, 2020, Vol.36.

34. Karthiyaini S., Sivakumar R., Shanmuga Sundaram M., “Market response of real estate and automotive industry during pandemic-a transdisciplinary approach”, International Journal of Management, 2020, Vol.11, Issue 5, Pg.No.764-769.

35. Danish P., Mohan G.G., "Behaviour of self-compacting concrete using different mineral powders additions in ternary blends”, Revista Romana de Materiale/ Romanian Journal of Materials, 2020, Vol.50, Issue 2, Pg.No.232-239.

36. Odelli E., Selvaraj T., Perumal J., Palleschi V., Legnaioli S., Raneri S., “Pottery production and trades in Tamil Nadu region: new insights from Alagankulam and Keeladi excavation sites”, Heritage Science, 2020, Vol.8, Issue 1.

37. Sarumathi K., Elavenil S., “Mathematical modeling to develop a simple nano to macro structure concrete-based model”, Revista Romana de Materiale/ Romanian Journal of Materials, 2020, Vol.50, Issue 2, Pg.No.183-190.

38. Nabi J., Abdul R.A., “Employing B-Spline approach in parametric assessment of catenary shaped fabric-formed concrete beams”, Structures, 2020, Vol.27, Pg.No.474-486.

39. Harsha Vardhana Balaji M., Venugopal P., “Cost overrun factors: Exploration from the perspective of civil workers”, International Journal of Advanced Science and Technology, 2020, Vol.29, Pg.No.2241-2245.

40. Vali K.S., Murugan B.S., Reddy S.K., Farsangi E.N., “Eco-friendly hybrid concrete using pozzolanic binder and glass fibers”, International Journal of Engineering, Transactions A: Basics, 2020, Vol.33, Issue 7, Pg.No.1183-1191.

41. Varghese J., Rehaan Chandan M., Shanthakumar S., “Fixed bed column study for pesticide removal using silver nanoparticles-embedded polyurethane foam and glass beads”, Chemical Engineering Communications, 2020, Vol.207, Issue 10.

42. George G., Yendaluru R.S., Mary Ealias A., "Fabrication of Dye-Sensitized Solar Cells using natural flower dye extracts: A study on performance analysis and solar dye degradation”, Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 2020.

43. Thakur S., Das B., “Performance evaluation of microbial fuel cell with sewage wastewater and RO concentrate using composite anode made of Luffa aegyptiaca”, Environmental Progress and Sustainable Energy, 2020.

44. Manojkumar N., Manish Kumar M., Somwanshi S.K., Monish Raj M., Srimuruganandam B., "Estimation of PM2.5-Related Hospital Admissions and Its Monetary Burden in Hyderabad, India”, Lecture Notes in Civil Engineering, 2020, Vol.71, Pg.No.1-10.

45. Jayasingh S., Selvaraj T., Raneri S., “Evaluating the Impact of Organic Addition and Aggregate Gradation on Air Lime Mortar: New Compatible Green Material for Heritage Application”, International Journal of Architectural Heritage, 2020.

46. Pandi D., Kothandaraman S., Kuppusamy M., “Delineation of potential groundwater zones based on multicriteria decision making technique”, Journal of Groundwater Science and Engineering, 2020, Vol.8, Issue 2, Pg.No.180-194.

47. Subramanian N., Solaiyan E., “Study on bond strength of geopolymer and control concrete between fiber-reinforced polymer and steel bars”, Structural Concrete, 2020.

48. Nagajothi S., Elavenil S., “Experimental investigations on compressive, impact and prediction of stress-strain of fly ash-geopolymer and portland cement concrete”, Journal of Polymer Engineering, 2020.

49. Ealias A.M., Saravanakumar M.P., “Application of protein-functionalised aluminium nanosheets synthesised from sewage sludge for dye removal in a fixed-bed column: Investigation on design parameters and kinetic models”, Environmental Science and Pollution Research, 2020, Vol.27, Pg.No.2955-2976.

50. Kumar S., Bharti R., Gupta P., Sofi A., “Study on Mechanical and Durability Properties of Recycled Coarse Aggregate in Concrete”, Lecture Notes in Civil Engineering, 2020, Vol.46, Pg.No.303-313.

51. Balagopal V., Sambamurthy V., “Performance evaluation of coir pith ash blended cement concrete exposed to elevated temperature”, Jurnal Teknologi, 2020, Vol.82, Issue 2, Pg.No.93-100.

52. Giraka O., Selvaraj V.K., “Short-term prediction of intersection turning volume using seasonal ARIMA model”, Transportation Letters, 2020, Vol.12, Issue 7, Pg.No.483-490.

53. Saranya D., Shanthakumar S., “Effect of culture conditions on biomass yield of acclimatized microalgae in ozone pre-treated tannery effluent: A simultaneous exploration of bioremediation and lipid accumulation potential”, Journal of Environmental Management, 2020, Vol.273.

54. Lischi S., Odelli E., Perumal J.L., Lucejko J.J., Ribechini E., Mariotti Lippi M., Selvaraj T., Colombini M.P., Raneri S., “Indian Ocean trade connections: characterization and commercial routes of torpedo jars”, Heritage Science, 2020, Vol.8, Issue 1.

55. Kakria K., Thirumalini S., Secco M., Shanmuga Priya T., “A novel approach for the development of sustainable hybridized geopolymer mortar from waste printed circuit boards”, Resources, Conservation and Recycling, 2020, Vol.163.

56. Balasubramani D.P., Gopalakrishnan V., “Subsurface object detection and characterization using Ground Penetrating Radar”, Innovative Infrastructure Solutions, 2020, Vol.5, Issue 3.

57. Loganathan P., Mahindrakar A.B., “Evaluation of surface temperature and prediction of changes in future projections using quantile to quantile change factor methodology over cauvery river basin-peninsular India”, Indian Journal of Ecology, 2020, Vol.47, Issue 2, Pg.No.312-315.

58. Chintalapudi K., Pannem R.M.R., “The effects of Graphene Oxide addition on hydration process, crystal shapes, and microstructural transformation of Ordinary Portland Cement”, Journal of Building Engineering, 2020, Vol.32.

59. Kumar V., Kumar A., Sofi A., “Study on Geo-polymer Concrete Under Acidic and Saline Conditions”, Lecture Notes in Civil Engineering, 2020, Vol.46, Pg.No.291-302.

60. Budamala V., Mahindrakar A.B., “Approximation of Metro Water District Basin Using Parallel Computing of Emulator Based Spatial Optimization (PCESO)”, Water Resources Management, 2020, Vol.34, Pg.No.121-137.

61. Subramanian N., Elavenil S., “GGBFS & M-sand impact on workability and strength properties of fly-ash based geopolymer concrete”, Indian Journal of Engineering and Materials Sciences, 2020, Vol.27, Issue 1, Pg.No.67-76.

62. Sujay H.M., Nair N.A., Sudarsana Rao H., Sairam V., “Experimental study on durability characteristics of composite fiber reinforced high-performance concrete incorporating nanosilica and ultra fine fly ash”, Construction and Building Materials, 2020, Vol.262.

63. Balamurugan G., Viswanathan T.S., “Comparative study on CFRP and GFRP composite in strengthening of RC slab”, International Journal of Emerging Trends in Engineering Research, 2020, Vol.8, Issue 9, Pg.No.5424-5429.

64. Wadhwa A., Pavan Kumar K., “Selection of best stormwater management alternative based on storm control measures (SCM) efficiency indices”, Water Policy, 2020, Vol.22, Issue 4, Pg.No.702-715.

65. Giraka O., Kumar S.V., “Measurement of Mode-Wise Individual Delay Components and Prediction of Queue Length at a Signalized Intersection Under Heterogeneous Traffic Conditions”, Journal of The Institution of Engineers (India): Series A, 2020, Vol.101, Pg.No.753-770.

66. Danish P., Mohan Ganesh G., “Durability properties of self-compacting concrete using different mineral powders additions in ternary blends", Revista Romana de Materiale/ Romanian Journal of Materials, 2020, Vol.50, Issue 3, Pg.No.369-378.

67. Rajumon R., Aravind S.P., Bhuvaneshwari S., Ranjitha J., Mohanraj P., “Removal of cadmium heavy metal ions from wastewater by electrosorption using modified activated carbon felt electrodes”, Water Science and Technology, 2020, Vol.82, Issue 7, Pg.No.1430-1444.

68. Loganathan P., Mahindrakar A.B., “Assessment of changes in observed rainfall and prediction of future conditions using quantile delta mapping bias correction technique over cauvery River Basin, India”, Indian Journal of Ecology, 2020, Vol.47, Issue 3, Pg.No.708-711.

69. Vijayaraghavan G., Shanthakumar S., “Removal of crystal violet dye in textile effluent by coagulation using algal alginate from brown algae sargassum sp”, Desalination and Water Treatment, 2020, Vol.196, Pg.No.402-408.

70. Adamala S., Srivastava A., Bachina H.B., Palakuru M., “Evaluation of VIC, ANN and Empirical Models for Estimating Daily Reference Evapotranspiration”, Indian Journal of Ecology, 2020, Vol.47, Pg.No.29-36.

71. Loganaganandan M., Murali G., Salaimanimagudam M.P., Haridharan M.K., Karthikeyan K., “Experimental Study on GFRP Strips Strengthened New Two Stage Concrete Slabs under Falling Mass Collisions”, KSCE Journal of Civil Engineering, 2020.

72. Thakur R., Barik D.K., “Impact of Temporal Variation of Land Use/Land Cover and Precipitation on Runoff Estimation in an Ungauged Hilly Watershed in Kodagu”, Watershed Management 2020: A Clear Vision of Watershed Management, Pg.No.265-277.

73. Balamurugan G., Viswanathan T.S., “Evaluation of the effects of orientation and coverage areas of FRP lamination bonded with two-way RC slabs a modular approach”, Civil Engineering and Architecture, 2020, Vol.8, Issue 4, Pg.No.706-713.

74. Umamaheswari J., Kavitha M.S., Shanthakumar S., “Outdoor cultivation of Chlorella pyrenoidosa in paddy-soaked wastewater and a feasibility study on biodiesel production from wet algal biomass through in-situ transesterification”, Biomass and Bioenergy, 2020, Vol.143.

75. Narmadha V.V., Jose J., Patil S., Farooqui M.O., Srimuruganandam B., Saravanadevi S., Krishnamurthi K., “Assessment of Microplastics in Roadside Suspended Dust from Urban and Rural Environment of Nagpur, India”, International Journal of Environmental Research, 2020, Vol.14, Pg.No.629-640.

76. Vignesh V., Mayakrishnan M., “Design parameters and behavior of helical piles in cohesive soils A review”, Arabian Journal of Geosciences, 2020, Vol.13, Issue 22.

77. Vijayan V., Santhi M.H., Mohan R., “Seismic Performance of High Rise Buildings with Different Types of Shear Wall”, IOP Conference Series: Materials Science and Engineering, 2020, Vol.936, Issue 1.

78. Nair N.A., Sairam V., “Research initiatives on the influence of wollastonite in cement-based construction material- A review”, Journal of Cleaner Production, 2020.

79. Parimalarenganayaki S., “Managed Aquifer Recharge in the Gulf Countries: A Review and Selection Criteria”, Arabian Journal for Science and Engineering, 2020.

80. Manojkumar N., Srimuruganandam B., “Health benefits of achieving fine particulate matter standards in India - A nationwide assessment”, Science of the Total Environment, 2020.

81. Francy N., Shanthakumar S., Chiampo F., Sekhar Y.R., “Remediation of lead and nickel contaminated soil using nanoscale zero-valent iron (Nzvi) particles synthesized using green leaves: First results”, Processes, 2020, Vol.8, Issue 11, Pg.No.1-12.

82. Jithendra C., Elavenil S., “Sustainable Self-Compacting Geopolymer Concrete under Ambient Curing-Durability Properties”, IOP Conference Series: Earth and Environmental Science, 2020, Vol.573, Issue 1.

83. Prem Kumar V., Vasugi V., “Bamboo materials in cement, geopolymer and reinforced concrete as sustainable solutions for better tomorrow”, IOP Conference Series: Earth and Environmental Science, 2020, Vol.573, Issue 1.

84. Saravanan S.S., Jagadeesh P., “Evaluation of strength and durability properties of sustainable concrete paver blocks using manufactured sand as fine aggregates”, Journal of Green Engineering, 2020, Vol.10, Issue 10, Pg.No.7905-7916.

85. Palakurua M., Yarrakula K., “A comparison study of space borne Dual Polarization Difference Index (Sea Wind SCATSAT-1 Scatterometer) and NDVI (MODIS) on paddy crop growth”, Indian Journal of Geo-Marine Sciences, 2020, Vol.49, Issue 9, Pg.No.1580-1586.

86. Hareendranathan G., Stella J.J., Selvaraj T., Murugan N., “GROUTING AND INJECTION TECHNIQUES TO REPAIR CRACKS AND WATER LEAKAGE AT the RENUKA DEVI TEMPLE, CHANDRAGUTTI, INDIA [POPRAVLJANJE RAZPOK S TEHNIKAMI OMETAVANJA IN NABRIZGAVANJA V TEMPLJU RENUKA DEVI, CHANDRAGUTTI, INDIJA]”, Materiali in Tehnologije, 2020, Vol.54, Issue 5, Pg.No.633-642.

87. Reddy P.N., Jindal B.B., Kavyateja B.V., Narender Reddy A., “Strength enhancement of concrete incorporating alccofine and SNF based admixture”, Advances in Concrete Construction, 2020, Vol.9, Issue 4, Pg.No.345-354.

88. Reddy A.N., Reddy P.N., Kavyateja B.V., Reddy G.G.K., “Influence of nanomaterial on high-volume fly ash concrete: a statistical approach”, Innovative Infrastructure Solutions, 2020, Vol.5, Issue 3.

89. Rajan R., Babu P.R., Senthilnathan K., “Light harvesting using solar cells and luminescent solar concentrators”, Current Science, 2020, Vol.118, Issue 11, Pg.No.1652-1655.

90. Devulapalli L., Kothandaraman S., Sarang G., “Microstructural characterisation of reclaimed asphalt pavement with rejuvenators”, International Journal of Pavement Engineering, 2020, Pg.No.1-12.

91. Loganathan P., Mahindrakar A.B., “Assessment and ranking of CMIP5 GCMs performance based on observed statistics over Cauvery river basin Peninsular India”, Arabian Journal of Geosciences, 2020, Vol.13, Issue 22.

92. Manojkumar N., Monishraj M., Srimuruganandam B., “Commuter exposure concentrations and inhalation doses in traffic and residential routes of Vellore city, India”, Atmospheric Pollution Research, 2020.

93. Varsha S.S.V., Soomro A.F., Baig Z.T., Vuppaladadiyam A.K., Murugavelh S., Antunes E., "Methane production from anaerobic mono- and co-digestion of kitchen waste and sewage sludge: synergy study on cumulative methane production and biodegradability”, Biomass Conversion and Biorefinery, 2020.

94. Yadav A.L., Sairam V., Srinivasan K., Muruganandam L., “Synthesis and characterization of geopolymer from metakaolin and sugarcane bagasse ash”, Construction and Building Materials, 2020, Vol.258.

95. Ganesh S., Danish P., Anita Jessie J., Ganie M.A., Raina C.S., “Experimental study on self-healing concrete with the effect of bacillus subtilis bacteria to improve the strength and sustainability of the concrete”, Journal of Green Engineering, 2020, Vol.10, Issue 4, Pg.No.1909-1923.

96. Umamaheswari J., Bharathkumar T., Shanthakumar S., Gothandamb K.M., “A feasibility study on optimization of combined advanced oxidation processes for municipal solid waste leachate treatment”, Process Safety and Environmental Protection, 2020, Vol.143, Pg.No.212-221.

97. Janani S., Santhi A.S., “Failure of concrete under impact: an experimental investigation and its numerical prediction”, Asian Journal of Civil Engineering, 2020, Vol.21, Pg.No.1415-1429.

98. Chintalapudi K., Pannem R.M.R., “An intense review on the performance of Graphene Oxide and reduced Graphene Oxide in an admixed cement system”, Construction and Building Materials, 2020, Vol.259.

99. Selvaraj T., Srinivasan V., Raneri S., Fernando M., Kakria K., Jayasingh S., “Response of organic lime mortars to thermal and electrical shocks due to lightning strikes”, Sustainability (Switzerland), 2020, Vol.12, Issue 17.

100. Vasugi K., Elavenil S., Hema Sumanth B., “Forecasting compressive strength of ambient cured GGBS based sustainable geopolymer concrete by ML technique”, Journal of Green Engineering, 2020, Vol.10, Issue 7, Pg.No.4095-4111.

101. Budamala V., Baburao Mahindrakar A., “Integration of Adaptive Emulators and Sensitivity Analysis for Enhancement of Complex Hydrological Models”, Environmental Processes, 2020, Vol.7, Pg.No.1235-1253.

102. Umamaheswari J., Shanthakumar S., “Paddy-soaked rice mill wastewater treatment by phycoremediation and feasibility study on use of algal biomass as biofertilizer”, Journal of Chemical Technology and Biotechnology, 2020.

103. Jose J., Srimuruganandam B., “Application of micro-morphology in the physical characterization of urban road dust”, Particuology, 2020.

104. Balagopal V., Viswanathan T.S., “Effect of elevated temperature on performance of concrete containing supplementary cementitious material derived from coir industry”, International Journal of Emerging Trends in Engineering Research, 2020, Vol.8, Issue 8, Pg.No.4496-4501.

105. Baldev D., Kumar A., Tiwari S., Muthukumar M., Shukla S.K., “Utilization of bagasse ash in the compacted clay liner”, Lecture Notes in Civil Engineering, 2020, Vol.89, Pg.No.297-302.

106. Yeddula B.S.R., Somasundaram K., “Effect of red mud proportion on the strength and microstructure of ferrosialate based geopolymer mortar”, Indian Journal of Engineering and Materials Sciences, 2020, Vol.27, Issue 3, Pg.No.554-563.

107. Sujatha G., Shanthakumar S., Chiampo F., “UV light-irradiated photocatalytic degradation of coffee processing wastewater using tio2 as a catalyst”, Environments - MDPI, 2020, Vol.7, Issue 6, Pg.No.1-13.

108. Iqbal T.H.P.K.M., Yarrakula K., “Probabilistic flood inundation mapping for sparsely gauged tropical river”, Arabian Journal of Geosciences, 2020, Vol.13, Issue 18.

109. Rakshith B.D., Suneel Kumar M., “Behaviour of steel columns with realistic boundary restraints under standard fire”, Structures, 2020, Vol.28, Pg.No.626-637.

110. Selvaraj T., Yadav A., Bahuguna H., Drewnowski J., Ganesapillai M., “Ancient settlements-atavistic solutions for present water supply and drainage problems engendered by urbanism”, Environment, Development and Sustainability, 2020.

111. Deepa Nivethika S., Sreeja B.S., Radha S., Senthilpandian M., “Polymer resin coating over dielectric elastomer for effective stretchable RF devices”, Journal of Optoelectronics and Advanced Materials, 2020, Vol.22, Issue 43924, Pg.No.176-181.

112. Iwendi C., Bashir A.K., Peshkar A., Sujatha R., Chatterjee J.M., Pasupuleti S., Mishra R., Pillai S., Jo O., “COVID-19 patient health prediction using boosted random forest algorithm”, Frontiers in Public Health, 2020, Vol.8.